1 user can access inernet, another user on same computer cannot

I can access the internet, another user on same computer gets the message "connection was reset"

This article should be of help: http://docs.info.apple.com/article.html?artnum=93195

Similar Messages

  • Mac Pro can access other Macs but those same Macs cannot access the Mac Pro

    Hello.
    I have a highly annoying problem that goes as follows:
    My (home) network consists of:
    - 1 Mac Pro (e2008 - 10.5.6)
    - 1 iMac (2008 - 10.5.6)
    - 1 MacMini (2004 - 10.4.??)
    - 1 MacBook Air (2008 - 10.5.6)
    The internet connection is alive and well with no drops not that it truely matters here.
    The setup is as follows:
    - Linksys AM300 in half bridge mode connects to the
    - Apple Airport Extreme Base station from which 1 cat6 cable runs to the
    - Mac Pro
    The other Macs connected to the Airport Extreme wirelessly.
    The Mac Pro has its network settings setup correctly (in fact it used to work fine but then just stopped working) and I have also disabled all network settings, rebooted and reapplied the settings to no effect.
    To clarify:
    I (Mac Pro) can connect to all Macs in the network but all those macs can see me but not connect to me. Connecting via the Finder simply says "Connection Failed" and if I open the "Connect to server.." and enter the IP address of the Mac Pro it results in an error/failed connection also.
    Any ideas to fix this would be highly appreciated.
    PS: As of now, 19/03/2009, I have all software updates installed on all macs in the network.

    Place the files you want to transfer on the Desktop
    Click on the Finder or desktop to swtich to Finder, then Go > Computer, then double click on the boot drive, then on the Users folder.
    Open the target User folder and inside is a Public folder > Drop Box, just drag and drop in there and the permissions change so that user can use the file.

  • Can I move applications from one user to another on the same computer?

    If I have two users on one mac, can I move applications from one user to another on the same computer?
    Thanks

    By default, apps are installed for all the users in /Applications

  • How can i save music and pictures so all users can access them?

    how can i save music and pictures so all users can access them?

    Hi, this should be your answer as for sharing music. For photos though, I would assume you can do the same thing. Hope it helps!
    http://support.apple.com/kb/ht1203

  • Can I create another User with user privileges in RV042 V3?

    Hello to all, good day!
    I am just wondering if it is possible to have two user accounts in Cisco RV042 V3 (Firmware:
    v4.1.1.01-sp (Dec 6 2011 20:03:18). User accounts to mean that one user can access the router with an administrative level access can do all the changes and management of the router's configurations and settings while another user can only do viewing of the system summary tab and connect and manage the simple configuration to connection to the ISP in both WANs, like setting up the connection type and release/renew the ip address for dynamic ip assigned by the ISP DHCP server.
    Thank you.

    RV042 only supports one administrator account with the current firmware. Newer products such as RV110W and RV220W support multiple user accounts.

  • Windows Users can access shares but Macs Can't

    Running 10.8 on the server and here is the below problem I am having
    1. Windows users can access the file shares read/write (even though they create permissions wrong, another day to takle that since I already tried ACL)
    2. Macs running 10.8 and Mavericks
         Open the server in finder on a user machine. Can sometimes see the two share folders. Other times just get the spinning wheel.
         Now if you are so brave to click on the folder then finder will spin forever.
         It locks finder up so hard that you can't shut down the machine without holding the power button. Other programs will run just fine, it only affects finder.
    I tried connecting from the mac with smb:// to see if it is an AFP issue but it just sits on connecting forever.
    I looked through the logs and don't see anything. But my knowledge of logs is terrible.
    Any help would be great.
    Thanks
    Thom

    Running 10.8 on the server and here is the below problem I am having
    1. Windows users can access the file shares read/write (even though they create permissions wrong, another day to takle that since I already tried ACL)
    2. Macs running 10.8 and Mavericks
         Open the server in finder on a user machine. Can sometimes see the two share folders. Other times just get the spinning wheel.
         Now if you are so brave to click on the folder then finder will spin forever.
         It locks finder up so hard that you can't shut down the machine without holding the power button. Other programs will run just fine, it only affects finder.
    I tried connecting from the mac with smb:// to see if it is an AFP issue but it just sits on connecting forever.
    I looked through the logs and don't see anything. But my knowledge of logs is terrible.
    Any help would be great.
    Thanks
    Thom

  • How far will the extreme reach and how many users can be on there at the same time?

    How far will the airport extreme reach and how many users can be on there at the same time?

    Last question first, since that is the easy one......approximately 50 (fifty) users for wireless depending on how active each user might be.
    The first question is much more difficult, as distance is not really the issue with wireless.....obstructions are the issue.
    A wireless signal can easily travel 300 feet or more with no obstructions in the signal path.
    But, a typical wall of sheetrock or wallboard in a home will absorb....on average....15-20% of the wireless signal. Brick or adobe will obviously absorb much more. A ceiling....because it is thicker....will absorb about 25-35% of the signal.
    So, if the wireless signal must pass through several walls and a ceiling, there won't be much, if any, of the signal left....even though the distance that the signal travels is not great...for example, 20-25 feet.
    Other wireless networks around you at the neighbors can also affect the relative strength of the wireless signal.
    The bottom line....locate the AirPort Extreme where wireless devices will receive a signal with the least amount of obstructions in the signal path. Your actual performance cannot be predicted in advance. You will not know how well the AirPort Extreme works for you until you try it out in your home.
    If you find that the signal does not reach as far as needed,  you will need to add additional "extenders", like an AirPort Express to provide more signal coverage.

  • How can I export an entire album to my desktop so any user can access my photos?

    Is there an easy way to export photos from my iPhoto library so that other users can access them without needing a Mac or iPhoto?

    But if it's a big album, be sure to create a new folder on the desktop first, to export them into. Having hundreds of individual photos on your desktop will slow your computer to a crawl.

  • How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.

    How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.

    See Terence Devlin's thorough explanation here.

  • Just updated to Firefox 8, can only connect 1 User at a time, how can I fix this so both users can connect to Firefox at the same time??

    I have just upgraded to Firefox 8. I have 2 user accounts on my computer. Since the upgrade, only 1 user can access Firefox at a time. I am able to use IE on 1 and Firefox on the other. I have to close Firefox on 1 user before I can open it on the 2nd.

    I also have gone back to V 7, which fixed the issue. I have stopped the automatic updates so the issue doesn't hapen again.

  • Can I create pages that only authorized users can access?

    I need to create pages that only authorized users can access, is that possible to be done with Muse? 

    Hi Natalia,
    If you are using Business Catalyst as a host , then "Yes" you need to publish a website to use Secure zone of Business Catalyst.
    If you are using a different host or BC then you may use third party widgets like
    Adobe Muse Password Protection Widget | MuseThemes.com
    Thanks
    Prabhakar Kumar

  • Check User Can Access the site collection Are Not?

    Hi All 
    I have some requirement to check user can access site are not through powershell?
    Recently we done migration from 2010 to 2013 SP after that i got some problem some users can not access site  but this user have permission in sp 2010 site .
    Regarding this i need to check specific user can loing or Access  the site collection are not. using powershell
    Some one said impersonate user we can check user can open the web are not but i don't know this impersonate.
    Please help me guys.... 

    Hi,
    You can check the permission for specific user with powershell. Here is the link. Hope this will help.

  • Can i setup an icloud acount which 3 different users can access?

    can i setup an icloud acount which 3 different users can access?

    Anyone can access any iCloud account if they know the login and the password. Assuming that you and the others concerned already have iCloud accounts with separate logins you could create a new Apple ID, use it to create a new iCloud account and then everyone would log into it in System Preferences>Mail, Contacts and Calendars so that its contents would appear alongside the individual 'Primary' accounts. If they don't have their own iCloud accounts they can sign in in System Preferences>iCloud, of course.
    You can enable the particular types of data syncing you want to carry out, but be aware that iCloud isn't designed for multi-person use, and basically everyone has full access to the account as if it was their own.

  • HT4878 How do i share my pictures, music and videos from one user to another on the same computer?

    How do i share my pictures, music and videos from one user to another on the same computer?

    lots of ways... you could use a thumb drive, you could drag files to the users public folder drop box, you could send it through email, you could use the internet servic called drop box (not to be confused with Apple's user public foldelr drop box).

  • "User can access account" option corresponding record attribute

    I am a developer and need to know what the flag/attribute is on a users Open Directory record. The admin here uses the following to deactivate users:
    Deselect the “User can access account” option in the Basic pane in Workgroup 
    But I cant see to find anything in the record looking at them through Apache Studio that shows who is active and who is deactive. I have admin access too.

    That info is not in LDAP, but in Apples PasswordServer. You can "telnet your-server-ip apple-sasl" and then "getidbyname yourusername". The resulting hex number is the slot id which you can get the policy by issuing "getpolicy 0x2334...94". You are looking for the "isDisabled" attribute.

Maybe you are looking for

  • Apple Store Refuses to Diagnose Hardware Issue after Boot Camp Installed

    I previously reported an issue in the Boot Camp Beta forum, but figured I share this with other MBP users as well. After loading the updated firmware, running boot camp to partion my drive, I installed Windows XP Professional. During the install, the

  • Component colouring  in ADF

    hi folks, i h've a one requirement and i also have one problem as i already filed here. first my problem sorry for hooking this link. Problem in Drag and Drop Requirement(af:calendar) and my Requirement. i want to put different color in af:calendar c

  • Impdp and available memory

    Just a quick one on how available memory can affect datapump imp. Will increasing the SGA from 2GB to 8GB of a database on which data is being imported affect the total import time? Just a bit curious! Thanks

  • JPXImport in linux (jdeveloper 10.1.3..3.0.3)

    Hi All, I am unable to see jpximport in my jdev bin on linux (ubuntu lucid). Any solution/pointers? using direct java command gives error about class path. Thanx in advance

  • Chapter needs to link to web or e-mail

    hello checked around but cannot figure out how to make chapter 2 (3,4,5etc) link to a web page or e-mail. I have entered it in inspector but when I simulate(which is set for web@ access) nothing happens....I want to click on the screen and have a web