1 year 3 Months Exp / wanting to switch to SAP

Hi Experts
I am a Electrical Engineering student, having 1 year 3 months experience in a manufacturing plant .
I am planning to switch to SAP . I have few queries here.
1. With this experience, if I do a SAP MM course, How would be the job prospects.
2.Is this experince enough?
2. Which module of SAP should I chose. Is it SAP MM , if not, please guide me for any other module.
Regards
Edited by: Swastik35 on May 9, 2011 4:50 AM
Moderator Message : Duplicate post locked.
Edited by: Vinod Kumar on May 9, 2011 9:53 AM

Welcome to the Forums!
+1. What screen should I go with? Regular or the Hi-res. LED screen.+
Whatever you like! High-res is nice, but the text will be ~small~ !!
+2. Why should I buy 4gig of ram with my computer from Apple for $400 when I get get it for almost 1/4 the price from a retailer and install it myself? Any reason the apple memory would be better?+
You shouldn't. Buy it from a 3rd party like Crucial or Newegg. Apple memory is just bought from other OEMs anyway, not made by Apple.
+3. Any advantage or disadvantage to get the black case?+
MacBook Pros are aluminum, not black. You're thinking of MacBooks.
+4. Does the 7200rpm 200gig HDD really add that much speed from the 250gig 5200rpm HDD?+
Adds a little, but honestly unless you're running I/O-intensive tasks you'll get more out of the extra 50 GB.
+5. Here is the big question. I don't need the computer until mid July. Should I wait to purchase to see if Apple comes out with a better processor and graphics card or is it unlikely this will happen?+
Although speculation about future Apple releases is +against the Terms of Use for these forums+, it's safe to say that there will ALWAYS be a better processor, better graphics card, faster this, more that, bigger the other released in a few months. That's the computer industry. If you need one, buy now. If you can wait, wait. No matter when you buy, there will always be something better soon. This link may help.
+6. Any advantage or disadvantage to the 15" over the 17"?+
Just a different size in a different configuration.
Go to an Apple Store, try them out!

Similar Messages

I've been using my mom's iTunes account for years but now I want to switch to another account. How can I do this without losing all of my pictures, music, and apps?

I've been using my mom's iTunes account for years but now I want to switch to another account. How can I do this without losing all of my pictures, music, and apps?

Follow the steps in wjosten's post here: https://discussions.apple.com/message/13356770#13356770 (for Windows, substitute Outlook in step 2).

Complete depreciation in last year first month

hi experts,
is there any way to complete deprec.in last year but in the first month.
i have used multilevel and i restrained the year and the month. this is two year asset
first year %33,333 of it depreciated and last year first month we want to complete deprec.
in the multilevel 1 year i made %33,333 percent and 2 year 1 month 100 of 24 referance value,
but it still calculates 12 months even though i restrained it.
any suggestions.

hi,
Use base method 0017 Ordinary: immediate deprec. (after end of life).
Rysiek

Wants to survive in SAP

Hi,
Now i am working in Netweaver Developer Studio [java] for past three months.I want to survive in SAP as many year as possible .i want to work as a Functional consultant.what steps should i have to take to achieve.Is there any sponsor programs to learn any specific functional part.
What is meant by boot camp.
Tell me what top most stage i can achieve in Netweaver .Does ABAP knowledge is mandatory to have a standard stability to survive in SAP. consider my current situation and share me some useful guidance.
with hope,
Ramanan.P

Hi,
Check things like
Java vs. ABAP
Eddy
PS. Reward useful answers and earn points yourself

Switching to SAP Consultancy

Hi all,
I am a Cost & Management Accountant, at 42 yrs of age. Now I want to switch to SAP Consultancy.
Until today, I had a 12 years to teaching experience for accounts & finance, cost & management. before that I had some Programming experience in CoBOL.
Can any body advise me, as my wish to switch over is GOOD, BAD, Ok or Excellent. or any thing else?
Thanking you in advance.

Well, I wasn't waiting to strike (I only do that when moderating
I just wanted to point out that skill as a programmer is more important than being able to use any particular language.
But you may still run into difficulties trying to move from accountancy back into programming. Most employers do want to hire programmers who already know ABAP. So while age shouldn't be an issue, there will be others.
Rob
PS - It doesn't look like you can assign po1nts in this forum. But I wouldn't worry about it. A good deed is it's own rew ard

Confuse to switch on SAP -QM

Dear all,
I want suggestions from you all. I have completed my BE(Mech) in 2007. I was worked in manufacturing industry for 6 months. Then I have done the course of SAP Business One. Currently I am working as Senior SAP Business One Functional Consultant.
Now I want to switch to SAP R/3. I have started the study of Quality Management. Can you please suggest me that I have chosen right way at right time or not.
Please guide me on the same. Is QM module is benefitial to me? How to start the study? Please give me the way for getting break in SAP R/3. i am bit confused at this stage. Need help of all of you as you are experts in this field.
Waiting for your reply.
Swapnil

without proper functional expertise never jump to any functional modules in R/3.

I want to switch from teacher/student edition to just student edition of my membership. I have already paid for a whole month though.

I want to switch my membership but have already paid for a whole month, what do I do,
who do can I contact.

Phone support | Orders, returns exchanges

I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

I am using a macpro 12 core computer
I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

You can have them both on the same computer as I and many others have done for years.
Just go ahead and install FCS 3 normally.
There will be absolutely no problems.

Switching subscription from "Photoshop for Photographers" to a full yearly 30$/month subsciption

Hi! I've switched from "Photoshop for Photographers" to a full yearly 30$/month subsciption, but the "Photoshop for Photographers" still stays. Is that a bug, or a feature? Also, if it's a feature, should I early-cancel it, or will that change my new subscription price?

i don't see it as much of a feature because you're getting nothing for that $10/mo. cancel it.
Cancel your membership or subscription | Creative Cloud

How can i change my membership? I pay now 19,99€ each month, but i want to switch to the 12,29€ per month.

Hi,
I am a teacher and i bought the membership for 19,99€, last september. Now there is a new offer of 12,29€ per month. Can i switch and how do i do that?
Ann

hello Rajshree,
i cancelled my current mebership and bought the new one at a lower cost. thx fot your support!
regards,
Ann
Verzonden met Windows Mail
Van: Rajshree
Verzonden: donderdag 26 juni 2014 12:01
Aan: Ann Cleuren
how can i change my membership? I pay now 19,99€ each month, but i want to switch to the 12,29€ per month.
created by Rajshree in Adobe Creative Cloud - View the full discussion
Yes, you can buy the new one now.
Regards
Rajshree
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6498799#6498799
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How to add a new metadata field to iPhoto where new field is calculated as age in years and month based on a specific date and the date photo was taken ? I want to calculate and display the age of my two kids on every photo.

Hi
How can I add 2 new metadata-fields to every photo in iPhoto ?
The new fields should state the age of my kids in years and months based on the date that they were born and the date that photo is taken.
Exampel:
My son is born 01.01.2010
My daughter is born 01.01.2012
Photo taken by data
Aage of son
Aage of daughter
01.07.2011
1 year 6 month
not born yet
01.01.2014
4 year 0 month
2 year 0 month
I would like to be able to search by kids age and get the info displayed when doing slideshows.
How to do this in iPhoto ?
Any alternatives to accomplish the same ?
Kind regards

It can't be done with iPhoto. There are some DAM (digital asset management) applications that can write to other IPTC fields that iPhoto can't read. One such app is Media Pro 1.
However you would have to calculate the age for each date and add it to one of the fields. There are online age calculators that can do that for you: Age Calculators
If you go thru that much trouble then use iPhoto, make the calculations and add the age to the Description field. Then you can use Smart Albums to search for 1year 6 month text.
OT

Key Figure format in Years and Months..

Hi,
Is there any Key figure similar to 0SRVCLENKYF (Length of Service (in Years)) part of Headcount and Personnel Actions, which should give me value in Years and Months..?
Thanks in Advance,
Thanks,
Madhu.

For curiousity sake...if you use the FIMA_DECIMAL_MONTHS_AND_YEARS Function Module, the output that you'll get is a months and years in fractional amounts. So, how are you going to get the Years and Months from this?
For example, if the from date is 20000101 and the to date is 20090914, the results from this Function Module will be Months = 116.42740 and Years = 9.70228. If you do use this, I'd suggest taking the whole number from passed value for years (9 in this example) and then calculate months by taking the franctional amount of the passed value for years and multiple it by 12 (0.70228 * 12), you end up with 9 Years, 8 Months (8.42736 to be exact, but you're going to want to truncate it to 8 so that when it goes above 8.5, the value doesn't become 9 when it still should be 8).

I want to switch my Father to a Mac Mini this Christmas, but...

I want to switch my Father to a Mac Mini this Christmas, but It's going to take some work. First, he does not use his pc for much. Microsoft Office (98 version), Quicken (2001 version), Outlookexpress, and Internet. OH and his favorite game the internet checkers thing. I want to try to get all I need under a thousand bucks.
I am sure a lot of things will change after leopard but lets talk what we know about.
Mac Mini with upgrade ram to a gig.
upgrade hd to 80 gigs. (He has been wanting to put his music on his computer)
He has a 4:3 monitor flat panel (i like widescreen but I only got 1000 here) and mouse and I have a wireless apple keyboard already for him.
Do I get Apple care? It is a nice chunk of my 1000 allowance.
Can he buy it on his own after wards?
I have to buy him office because he feels that he could never leave Pcs because of Office ( I use neo office) but I'm sure he would not be happy with that.
Hopefully by then Office for mac 08 will be out for 150 bucks. When do you think it will be out?
He use quicken manage his checking accounts. I have never used Quicken before can you export your data?
I heard quicken ***** for mac. I don't believe he uses it for all its features but I would think it would be easier for him to accept quickin then some other third party. Soley based on the name.
I'll try to find out more.

You can buy Applecare anytime before the 1 year warranty expires, so you could leave that to his discretion if you wanted, and he'd have 1 year to consider it.
You can save ~$30 on the mini if you qualify for an educational or corporate discount. Office 2004 costs ~$145 with educational discount.

Year and Month calculation

Hi
I have created a report with two prompts, they are "Enter Start date:" and "Enter End date:" where i take date values from a calendar while prompting.
For example:
Start date = 10/11/2003
End date = 10/10/2003
If i want to display the End date means, i ll use UserResponse("Enter End Date:") in the webi reports. What should i do to calculate Year and Month from this user response value,
i used these calculations below, but it is not working, showing me #ERROR message.
1) ToDate(UserResponse("Enter End Date:");"dd/MM/yyyy")     = #ERROR
2) FormatDate(ToDate(UserResponse("Enter End Date:");"dd/MM/yyyy");"dd/MM/yyyy")     = #ERROR
3) Year(UserResponse("Enter End Date:")   = The expression or sub-expression at position 6 in the 'Year' function uses an    invalid data type. (WIS 10037)
4) FormatDate(ToDate(UserResponse("Enter End Date:");"dd/MM/yyyy hh:mm:ss A");"MM/dd/yyyy") =#ERROR
so help me how to get the year and month values from prompts ?
Thanks
Dineshkumar

to get the Month Value and year value in Webi
month name
=Month(ToDate(UserResponse("Enter End Date:");""))
month number of the year
=MonthNumberOfYear(ToDate(UserResponse("Enter End Date:");""))
to get the Year Value
=Year(ToDate(UserResponse("Enter End Date:");""))
good luck

I am attempting to have cells use data from a selective month from the year before so that I can show actual from the prio. years each month.

I am attempting to have cells use data from a selective month from the year before so that I can show actual from the prio. year each month. I need to create a spreedsheet using the the Acutlas from the year-to-date and from last year-to-date, but need to report each month.

Hi Tony,
Answering your question would be easier given a screen shot of the source table and one of what you want the summary table to look like.
Is the data you want for each month in a single cell o the source table, or does the summary table need to collect February's data (for example) from several cells and do some math with those numbers before presenting them on the summary table?
Regards,
Barry

1 year 3 Months Exp / wanting to switch to SAP

Similar Messages

Maybe you are looking for