10.0.1 causes 'Command +' to open Widget Manager

This only started happening after the 10.0.01 update. 'Command -' works as it should.
Anyone else experiencing this isue?

Not happening here. What's Widget Manager? Is it something you set in system preferences?
What keyboard is this? Extended? What +? On the keypad or next to delete?

Similar Messages

  • Change Open Item Management for GL accounts

    Hi All,
    Good Day.
    I would like to asked if you have any idea on how to solve the error we encountered upon opening our open item management for our GL? The error is Line item total does not tally with account balance. Message no. FH099.
    We have a Z* program customized from program RFSEPA02, we test it out in our QA and it was working fine. Even if the GLs has balance in QA.
    But when we transfer it in Production, we encountered this kind of error.
    Any idea how to solve it, i tried reading other questions on this forum with the same error, but i cant find any solution specific for this error.
    Please help.
    Thank you.

    Hi,
    See the  Note 203329 - RFSEPA02 generates FH099 alth. balance = item total
    Symptom
    Report RFSEPA02 generates the error message FH099: 'Line item total does not tally with account balance' although the item total tallies with the balance and SAPF190 does not show any differences.
    Additional key words
    RFSEPA01, FIINCON
    Cause and prerequisites
    Open item management has already been activated once and items were cleared so that cleared items exist in the system for the account. These are not taken into account during the check of the item total with the account balance and cause the error message.
    Solution
    Reset the clearing transactions using Transaction FBRA.
    Thanks & Regards,
    Shashi Kanth

  • Change Open Item management for FX valuation

    Hi,
    We have one case here where one GL had Open item management and it was revaluated with open items using an adjustment account. It ws done for a while and the user realize that this account was needed to be revaluated with the same account.
    Therefore, they remove the "open item" mark to the account and fill the "Exchange  rate diff key" in the master data and set up the KDB transaction for the FX valuation without open item. But the system is still working as before, the account is revaluated with the Adjustment account instead with the same account. It seems that the change from "open item" to NON open item is not working.
    Any advice?
    Thanks a lot,
    Adela.

    Hi,
    See the  Note 203329 - RFSEPA02 generates FH099 alth. balance = item total
    Symptom
    Report RFSEPA02 generates the error message FH099: 'Line item total does not tally with account balance' although the item total tallies with the balance and SAPF190 does not show any differences.
    Additional key words
    RFSEPA01, FIINCON
    Cause and prerequisites
    Open item management has already been activated once and items were cleared so that cleared items exist in the system for the account. These are not taken into account during the check of the item total with the account balance and cause the error message.
    Solution
    Reset the clearing transactions using Transaction FBRA.
    Thanks & Regards,
    Shashi Kanth

  • FCPX - command plus opens dashboard???

    FCP X Randomly started opening my dashboard when I press (command and plus) to zoom in on the timeline.
    Now when I need to zoom in,  the widget manager pops up under my dock, but I'm still looking at FCPX with floating close buttons all over the screen that would normally appear on widgets that you want to remove.
    FCPX is so buggy, When is 10.1 coming? For that matter just give me 10.5 and fix it all. I love the idea of learning how to edit differently after 5 years (just a lil sarcasm) but to do it in a faulty environment frustrates me to no end... or perhaps to jump ship...

    1st, make sure in your System Preferences you have F keys set to work as F keys, and that keyboard shortcuts are set to system default.
    2nd, a lot of us are not getting this behavior.  Get "Preference Manager" from Digital Rebellion (free) and trash FCP X pref files.  This clears up most bugs.

  • I am trying to create a new profile, but I cannot open profile manager in Mac OS 10.5.8. I get the following error: "dyld: unknown required load command 0x80000022 Trace/BPT trap".

    Hello,
    I am trying to repair my Firefox profile, but I cannot open profile manager in Mac OS 10.5.8. When I follow the directions for opening profile manager in my Terminal utility, I get the following error: "dyld: unknown required load command 0x80000022 Trace/BPT trap".
    At this point, Firefox (v 5.0 or previous versions), is not running.
    Thanks.

    [http://asqueella.blogspot.com/2010/12/dyld-unknown-required-load-command.html Here's an Explanation]. Basically you need to add "arch -i386 " at the beginning of the command because 10.5 is 32-bit only and more recent versions of Firefox default to 64-bit.

  • How do I keep the command window open?

    I want to write a batch file that will leave the window open after running so I can see what the output is.
    I kind of remember having to use %k
    But I'm not sure exactly how to do it.
    UPDATE: I found what I was looking for, it's /k when you execute the command file.
    If anyone has any additional comments about scripting and keeping the command window open, please comment.

    Add "pause" to the end of the batch.
    ¯\_(ツ)_/¯

  • Repairing Library Permissions: But the instructions didn't work  clicking the iPhoto icon with the Option and Command keys opened iPhoto but not the First Aid as promised

    Went to Help.  But the instructions didn't work
    clicking the iPhoto icon with the Option and Command keys opened iPhoto but not the First Aid as promised

    Give this a try:
    1 -be sure to have a current backup of the iPhoto library.
    2 - download and launch http://www.macchampion.com/arbysoft/BatChmod.
    3 - click on the File button, locate and select your iPhoto Library.
    4 - check the Unlock and Apply to enclosed checkboxes.
    5 - make no changes to the other checkboxes
    6 - click on the Apply button.
    OT

  • Command Windows.open only works once

    Hi all,
    Iu2019m using javascript command window.open to open a new browser window from a html link webui and is working fine.
    The issue I have is this only works once. If you close the window that you had opened, and click again in the link it doesnu2019t work. It only works if you call another link before. It seems there is a kind of cache in somewhere.
    Do you have any idea?
    Thanks in advance.
    Fernando.-

    Fernando,
      Change ur mywindow name every time.Kindly go through following code. 
    CALL FUNCTION 'GENERAL_GET_RANDOM_STRING'
      EXPORTING
      number_chars        = 3
      IMPORTING
      RANDOM_STRING       = mywindow
    var lr_window;
    lr_window = window.open("<%= lv_id%>","<%= mywindow%>","resizable=1,width=1100,height=674,fullscreen=yes");
    if (window.focus)
    {lr_window.focus()}
    lr_window.moveTo(0, 0);
    <%
      clear lv_id.
    %>
    <%-- delete lv_window; --%>
    <%-- mywindow.close(); --%>
    <%
      endif.

  • What is the terminal command to open sound preferences in Mac Snow Leopard

    Hi
    I want to know what is the command to open sound preferences dialog from command prompt.
    short key for doing this is option key + F12. But I am looking for somehting I can enter in terminal to open sound preferences.

    Get under the hood with Command Line and the Terminal. Unix forum is here for fast answer:
    http://discussions.apple.com/forum.jspa?forumID=735

  • Call x.exe and write command in opened DOS window

    Hi,
    I am using Labview 10 and Window 7. Just wondering how to use labview to
    1. run x.exe under opened DOS window?
    2. write command in opened DOS window?
    Any commends welcome,
    Thanks,
    Ott

    Please take a look here
    Alejandro | Academic Program Engineer | National Instruments

  • UNIX command to open applications

    I'm looking for a UNIX command to open any application on a client machine.
    I am also looking for a command to set the time of each machine to use a Network Time Server.
    Any help would be appreciated. Thank you.

    open /Applications/path...
    e.g.
    open /Applications/Safari.app
    time server:
    # turn on network time and designate a network time server.
    systemsetup -setusingnetworktime on;
    systemsetup -setnetworktimeserver time.apple.com;
    the time unix commands are available as a template from the send unix command window.

  • Is there a command to open all speed dials in new tabs without ckicking each speed dial individually? Thank you in advance!

    Is there a command to open all speed dials in new tabs without ckicking each speed dial individually? Thank you in advance!
    == This happened ==
    Every time Firefox opened
    == always

    Don't use that extension myself.
    See the Speed Dial manual on this website:
    http://speeddial.uworks.net/

  • Command-T opens new window not new Tab with Snow Leopard

    Does anyone else have this issue? Command-T opens new window not new Tab with SL.
    And yes all my settings are correct!!

    Greetings,
    If your preferences for Tabs are correctly set (the top two checkboxes are checked) and it's still opening a new window, then it would seem your preferences may be corrupt. In that case, you should quit Safari, go to Home/Library/Preferences and delete the com.apple.Safari.plist file.
    Then restart Safari, setup your preferences again, and test to see if it works.

  • What is command to open desk top of damaged screen macbook on another screen via firewire?

    what is command to open desk top of damaged screen macbook on another screen via firewire?

    How to use and troubleshoot FireWire target disk mode
    http://support.apple.com/kb/ht1661
    MacBook Pro, Mac OS X (10.6.7), 2.4GHz IntelCore i5 320 HD 8GB RAM

  • Can't open profile manager for mac with terminal command

    i have tried to open profile manager version 0.3.0 11/4/11 3:31 PM
    with every command that an extensive search has revealed. each attempt yields a "no such file or directory response"; e.g.,Last login: Tue Nov 29 00:26:23 on ttys000
    Welcome to Darwin!
    r-c-wolins-computer:~ rcwolin$ /Functions/firefox.app/Contents/MacOS/firefox -profilemanager
    -bash: /Functions/firefox.app/Contents/MacOS/firefox: No such file or directory
    r-c-wolins-computer:~ rcwolin$. i'm using a macbook 3,1 with os 10.6.8 and ff 4.0.1. what am i doing wrong and how can i rectify it?
    thanks for your help. this is making me crazy.

    yes i did. it is in the applications folder. however, the default path when i open a shell won’t get me there and i don’t know how to change it. it should be /don’t forget to smash the state [my computer’s name]/macintosh hd/applications/browsers/firefox.app [or something to that effect].
    also, when i drag profilemanager .app into terminal shell i get
    r-c-wolins-computer:~ rcwolin$ /Applications/ProfileManager.app
    -bash: /Applications/ProfileManager.app: is a directory
    does this mean that profilemanager.app is a directory? if it is, how do i access it?
    further, if /Firefox.app/Contents/MacOS/firefox-bin -profilemanager is supposed to be where the command indicates, it isn’t. how do i get it there?
    thanks for your help. you bailed me out before when i was perplexed about .sqlite files. i appreciate it.

Maybe you are looking for