10.0.2 Update - Doesn't Fix Titles

10.0.2 Still has the same problem with title bubbles. They may not revert to a "default font" but they randomly default back to saying "Title" instead of whatever was typed into them.
What a piece of crap FCPX is.

Have talked about this in the past and my experience up to now has been that projects started in 10.0.2 were ok. Not true anymore. Had one today where titles revert to default. The default can be the title or substitle line or the postion you left the title can go back to where the default postion is located. Seems to be limited to one title in project, but just as a test, quit several times and get various results. One occasion both title and subtitles defaulted, had one each and one where only the position switched. MacPro, 4 core, 16gb memory, working with Panasonic TM700 footage.

Similar Messages

The iOS 7.1 update doesn't fix the Wifi issue on iPhone 4S!

My wifi greyed out since iOS 7, the hair dryer did fix the problem for a day. But it greyed out again after a day, and now the 7.1 update doesn't fix that ****???

Have you followed the steps listed in iOS: Wi-Fi settings grayed out or dim - Support - Apple?
If not, do so immediately. Also, try: iOS: How to back up your data and set up your device as a new device.
The software update is not the cause of the problem. It is possible, however, that your hardware (i.e., the wi-fi chip) had a hidden problem, probably with heat tolerance, and the heat generated from the iOS update (the processor creates more heat the harder it works) pushed it past its tolerance.

Photoshop CS5 update doesn't fix artifact problem in the menu bar !

Hi to all,
I've installed the new update (december 7) recommended by Adobe, but that doesn't fix the Artifact problems in the menu bar !!!
More, with my Windows 7 Pro (French language), Photoshop CS5 video pilot create artifacts in the menu bar in several situations.
With Windows classic Theme chosen, theme management disabled:
1. Opening a photo and applying a filter (especially Noise Reduction).
2. Opening a photo and changing some preferences.
3. Opening a photo with Windows 7 File Explorer working cause the pilot to crash with a black screen, ans followed by a message saying that Win 7 has recovered the video pilot.
To suppress most of the problems, I need to Activate "Themes" and choose an Aero theme or the Basic Theme.
I also need to activate some items that slow the PC !
Very strange !
Could someone help, me please ?
Have a Nice Day.
Thierry

Yes, I've an Asus ENGT220/G/DI/1GD3, tried Windows default pilot, 2009 Asus pilot "nv19045_Win7Vista64.zip", and 2010 latest version "nv25919_Win7Vista64.zip", no change !
More, I've exchanged the video car by a "monster" ENGTX465 with it's driver, NO CHANGE !
So what to do ?!
Help, please !

Server 10.5.2 update doesn't fix SUS wonky listing

Well, I updated a couple of servers yesterday to v10.5.2, in the hopes that Software Update Services might work a little better (or at least, somewhat predictably!). While they may yet be much improved, one thing that appears to still be hosed is the listing of updates and their descriptions. If you change sorting of the list to anything other than the default (and I have no idea what method the default listing is-- seem random), the descriptions no longer match up w/ the updates listed. I'm quite surprised that this rather glaring bug wasn't addressed. Is everyone else seeing the same (flawed) behavior still?
Fred

You're right, Mike...sort of! I am indeed administering from my PowerBook, which is running non-Server Mac OS X Leopard. I have updated it to v10.5.2 as well, but as far as I can tell, this doesn't update the Server Admin on my machine. And I'm not aware of any updaters...at least, Software Update doesn't show one.
If you look at the version # in Server Admin, it shows the same (10.5, build 279) on both a 10.5.2 server in question and my PowerBook. However, the server's Server Admin shows the listing correctly, but my PB does not! So, with a little more digging, I looked inside SA's package contents, and discovered the SWUpdate plugin is v10.5.1 and newer on the server than the v10.5 on my PowerBook. There's the answer, apparently.
Now, I'm not sure how you properly update the remote Server Admin program (my PowerBook in this case), aside from the dirty way of copying the actual binary. Then again, maybe I've overlooked some Server Admin update somewhere. Any ideas?
Thanks,
Fred

Not a hang - no misty screen, no hourglass, no 'Not Responding' - but it doesn't respond and updating doesn't fix it.

Was on some prehistoric version of Firefox as I only update when I have a problem with an old version. It started to become absurdly slow, so I updated to 19.0.2 as advised by the window that came up. However, if anything it's got worse. It starts with a blank window, then the 'Restore Session' page comes up, then it just doesn't let me click on or type anything at all. As I've said, if a hang is when the screen goes misty, the cursor becomes what used to be an hourglass but is now a circle and the words 'Not Responding' appear in the title bar, then this is not a hang because none of those things happen, but I can't do a damn thing with it. I've tried shutting it down through Task Manager, even though it's not using anything like the level of memory where that is usually necessary, and then restarting it, but to no avail. How can I get it working again?

Do a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 19.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/

10.7.1 update doesn't fix my internet sharing problem

I've updated my Macbook (late 2008) to 10.7.1 today. I'm disappointed to find that the internet sharing issue still exists. I can ping websites through it, but wget never work. Google.com is accessible while other sites don't load on my iPod touch and Palm Pre Plus. But it did work fine within seconds after internet sharing was started. And internet sharing on my iMac with 10.6.8 works perfectly.
I'm using PPPoE to connect to the internet. I guess there are some problems with MTU (maximum transmission unit).
Don't tell me to change wifi channel or set password, it doesn't help.

m4sheikh wrote:
Internet sharing worked on 10.7 after doing 1 tweak, that is by changing my Computer Name in internet sharing to something else other than the default one... however after upgrading to 10.7.1, the upgrade would mess up with the same tweaks again. It brought my Computer Name to its default, however when I clicked on edit it would give the changed name... I noticed that it has something to do with the IP Address but in any case I did the following and it works again for me on 10.7.1:
1) Go to System Preferences>Sharing and click on Internet Sharing (don't 'tick' it yet!)
2) After upgrading to 10.7.1, the Computer Name displayed on the Internet Sharing Screen would revert to the original, i.e. YourName's MacBook Pro. However, upon click edit next to the space where you can enter your Computer Name, it would give the name I had given while I was on 10.7.
3) Now you just have to make sure that both names are identical (do not use the default name YourName's MacBook Pro). Please see snapshot below (yes, my Computer Name is 'Network-Error', so don't be surprised:))!
4) Once you have confirmed that both names are identical, you are set to go and you may 'tick' the Internet Sharing option
5) An arrow facing upwards will appear instead of the wireless icon on the top tray and your device such as an iPhone should connect without any issues (an IP address will be given).
Note: the other options that I have kept in the Wi-Fi Options tab are as follows:
1) Network Name: should be identical to the one you have entered above
2) Channel: 11
3) Security: 40-bit WEP
4) Password: I've entered a five-digit password that contains numbers
To confirm that its working for me, I've added a screenshot from my iPhone below:
It doesn't work for me. Thanks anyway.

EFI 1.1 update doesn't fix 2GB limit in XP 32

Hi Guys,
I was hoping this would fix the 2GB limit but I still have it.
I wish apple would fix this one, maybe it is not possible.
Cheers
Andy

Stupid Q? here but have you tried to get updated drivers and using the *.inf to install them / manual add hardware if they do not wish to run the setup completely.
Likely Dell drivers for a similar spec machine might *.ini work after the r1xxxx file extracted and complained about it not being a Dell.
Should be in dell forlder on C: drive .
Also you can try a Demo of VMware or buy it and run it as it would give you direct hd / hardware access and then install windows onto vmware .
If it does the same = firmware if not then ??
You could also unplug all card except the video ram cpu etc. you get the idea and try to run install again as IRQ's are extremely poorly coded in any microsoft product and some graphics / sound drivers does interfere with it if bios is unwilling to comply.
Either way hope this helps.

Update doesn't fix missing help menu?

Downloaded the latest update hoping to find that the missing help menu had been fixed, but I guess not. It seems that this should be available to those that downloaded Aperture 2 (.0.1 now) just like those who got the box. I have downloaded the help manual pdf, but don't know how to get it to show up in the program help menu.

mbmgibson wrote:
My mother was a proof-reader. I think it's in the blood
what so funny about it especially for me as a native German:
now for years we have a pest called 'Deppenapostroph'(=dummy's apostrophe): you see anywhere Karsten's Diner, Karsten's Barbershop, Karsten's Applestore - which is wrong in German (Karstens Diner...)
so, funny enough, obviously we were able to export that apostrophe-too-much into your language .. in the new version of 'loss of its' .. how about her's and hi's?

10.5.1 Update doesn't fix iChat/Photobooth video issues.

I didn't really think it would since there were a lot of lower level OS items to repair before working on particular hardware issues.
That being said, I'd like to make it clear that video is broken for iChat and Photobooth on my MacBook Pro. I get a black screen whenever I try to use the built-in iSight camera.
If I fire up Skype, the video works fine as it uses a different method to grab the camera image.
So for Apple folks perusing the forum, please add this to the list of issues. Thanks.

You're welcome, steve.
The difference between Software Update and standalone is explained here. The article also explains recovering from possible installation process interruptions, which can be the cause of some strange problems.
Be sure to repair permissions after the update. The 10.5.1 update installer left many permissions needing repair on my PPC Mac.
If the standalone installer does not help you, consider Possible hardware or software conflicts.
Once you eliminate potential conflicts, and if you have problems only with the two apps, those two apps may have been damaged somehow. Perhaps reinstalling the two apps will correct your problem?
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.1) External iSight

After updating to ios 5, my calendar sometimes freezes when entering a new event. I have tried syncing but it doesn't fix the problem. Are there any bug fixes for this? Any ideas would be great thanks, I don't really want to have to reset everything!

After updating to ios 5, my calendar sometimes freezes when entering a new event. I have tried syncing but it doesn't fix the problem. Are there any bug fixes for this? Any ideas would be great thanks, I don't really want to have to reset everything!

Try to reset the iPod by pressing the home and sleep button for about 10sec, until the Apple logo comes back again. You will not lose data doing a reset, but it can clear some glitches after installing new software or apps.

Unable to text after update. Also, the dock buttons are frozen. I've tried restoring, but it doesn't fix problem. Any suggestions?

I am unable to text after update. Also, the dock buttons are frozen. I've tried restoring, but it doesn't fix problem. Any suggestions?

You posted in a thread that has not had any activity in 2 years! Please start your own topic. Also, please describe in detail all you have attempted to do in order to resolve the issue.
It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
Please complete or update your system profile so the users here can properly help you.

I bought Finalcut X from the App store store when it first came out but software update doesn't see it and let me download the newer versions! How do I fix this?

I bought Finalcut X from the App store store when it first came out but software update doesn't see it and let me download the newer versions! How do I fix this please?
thanks
Russell Moran

Just delete it from the Applications folder, and re-download it.
If it still says installed when you go to Purchased in App Store, click somewhere else, and option-click Purchased. That allows you to redownload already installed software.

Have to force-quit Mail - Update did not fix

The update seemed to fix all of the issues I had with SL, except for the spinning wheels in Mail, and that Mail will not quit without a force-quit. It will even cancel a restart. Am I the only one left with this issue?

Problem
Here is what is happening. Btw I am using a Dutch version so my apologies if I translate menu-options wrong.
Mail is opened at startup. When I want to quit (CMD-Q) mail, nothing happens and the program gets in a sort of wait state. The system doesn't say that mail is not responding anymore. When I open the Mail-menu several options are greyed-out, including the CMD-Q as if the program is waiting for something. After waiting 15 minutes still the same and the only way to end mail is by using the force quit option.
If Mail is opened and I use the red X to close the window it isn't possible to open it anymore. Stopping the normal way isn't possible either and I am in the same situation as above and need to force-quit Mail.
If I leave Mail open and want to shutdown the computer I have to force quit Mail, because otherwise I cannot shutdown anymore.
*Solutions I've tried*
Using the Rebuild menu-option doesn't help.
I have downloaded the complete 10.6.2 dmg-file and re-installed it. This seemed to fix the problem, at least for a little while. But unfortunately after a day the same problem came back
How can this be possible?
Is there anyone out there who has the same problem and knows how to fix this? Would it help to re-install the mailprogram? How do I do this?
This is happening on the new computer of my father. I have convinced him to make the switch from Windows, but this situation is making me feel a bit embarrassed

Software Update doesn't work

I just upgraded from Tiger to Leopard (10.5.2) and I've been getting quite a few error messages since then (application quit unexpectedly) with various programs, but the one that concerns me most is if I manually go into Software Update. Does anyone have any ideas as to why this might be happening?

I know I was having a lot of problems with apps loading when I was still running Tiger, (and later found out because they weren't compatible with the old OS.)
Are you sure you did a complete upgrade? It sounds like it may not have done a full install.
Try reinstalling 10.5.2 COMPLETE INSTALL, and see if that doesn't fix your problem.

Clicking 'update' in software update doesn't update

Clicking update doesn't do anything, these remain in my window. I tried restarting but issue remains.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

10.0.2 Update - Doesn't Fix Titles

Similar Messages

Maybe you are looking for