10.0.5 update has removed "record enable" button

Ever since the update I can no longer record any audio with my blue microphones yeti mic. The "record enable" button that is usually visible in the track header area has disappeared even when enabled in track header configuration. I have also messed with the audio preferences settings but cannot get the button to show up. Please help report this bug to apple using the following link!
https://www.apple.com/feedback/logic-pro.html
Thanks!

Update: Apparently both M-Audio and Alesis have gone 'missing in action' over this issue on the net/forums.. but here are the phone numbers to contact M-Audio support directly for anyone wishing to do so..
M-Audio USA & Canada
Phone: 401-658-5765
Hours: Monday - Friday 8:30AM - 6:30PM EST
M-Audio Germany
Phone: +49-2154-81299-20
Hours: Monday - Friday 9:00AM - 5:00PM CET
M-Audio UK
Phone: 44(0)1252-896040
Hours: Monday - Friday 9:00AM - 6:00PM BST
M-Audio Brazil
Phone: +5511 - 3222-6476
Hours: Monday - Friday 9:00AM - 6:00PM BRT

Similar Messages

  • 10.5 update has removed record enable

    Hey ho,
    I updated to logic pro 10.5 yesterday and record enable has diaspeared. Ive searched some older threads and went througt the sugested steps that fixed the problem for older Logic but they arent sorting out the 10.5 update. There is en empty space where the R button should be and ive also not got and input monitoring. I know its not my interface becaue it works in garageband. Ive been in preferences and the track header show/hide recoed enable but stiil no joy.
    any other ideas?
    cheers

    Magic,
    No.. that may not be the case..(Though of course, the update has triggered the problem)
    It could well be the way the M-Audio devices (and Alesis's gear comes from the same source. as are a few other cheaper interfaces who 'use' the same basic design ideas.) were designed.. and the fact they 'die' under 10.0.5 could be a symptom of a design issue, which causes the issue when a library/routine in Logic 10.0.5 was changed or updated...
    Otherwise many more audio devices would have have the same issue and that is plainly not the case....
    It's easy to jump to the wrong conclusion.... but until the cause is fully understood, it's best to say, the reasons for this particular issue, are unknown at this time
    It's also worth noting the audio devices having this issue, are also of the group that historically, tends to have issues when OS X and/or Logic is updated...whereas the audio devices that remain stable throughout, are not affected by this issue...
    So... It may well be that a fix might have to be forthcoming from the makers of the audio devices affected and not  from Apple themselves, if it's a design problem with the devices and/or their drivers..... which in the past has also been the case in similar situations with these particular audio interfaces.

  • I have a m-audio producer usb microphone and since the update on Dec. 22, 2013 Logic hasn't been allowing me to record with it. Logic is reading the microphone as the input but the audio tracks don't have the record enable button. What's wrong?

    I have a m-audio producer usb microphone and since the update on Dec. 22, 2013 Logic hasn't been allowing me to record with it. Logic is reading the microphone as the input but the audio tracks don't have the record enable button and won't let me select an input for the audio track on the inspector panel. What are some possible solutions.

    Certain M-Audio USB devices (along with some other USB2 class compliant devices that don't use drivers) no longer work with Logic Pro X 10.0.5
    At this time it is unknown as to why this has happened. Nor is it known if Apple will need to fix it or if it is up to the Developers of said USB2 devices  to remedy the problem.
    In the mean time, assuming you made/could make backups prior to updating to 10.0.5.... the solution is to roll back to LPX 10.0.4...

  • HT203167 yet again failed iTunes update has removed my purchased music

    latest update has removed some of my purchased tunes update stalle part way!

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • Record enable button disappeared Logic Pro X

    I have been using Logic Pro X for several months without any problems but now the Record Enable Button has disappeared.
    There is a space where it should be. If I choose "Hide Record Enable" the space disappears, but choosing "Show Record Enable" results in only a blank space where R used to be.
    I have checked my hardware settings and my audio input appears like it should.
    The problem is not appearing on my MacBook so I tried creating a new file and importing it to my desdtop Mac (Mini), but when I did this the Record Enable button promptly disappeared.

    Well, yes.. but thats how you are meant to assign/select an Audio device in every version of Logic... going back several major versions now. You had to have done that in Logic Pro 8 or 9 in the past.. You probably just forgot you had to do so initially.
    Anyhow...
    The problem described in this thread was caused by incompatible drivers and a change made to LPX during an update...
    ...and was not caused by the OP failing to select the Audio interface correctly in audio prefs in the first place...
    Cheers..
    Nigel

  • "record enable" buttons not showing up in Garage Band 10.0.3 (I have selected "show record enable"- a space in the track header opens up, but the button is not present.  Same with "input moniter".

    "record enable" buttons not showing up in Garage Band 10.0.3 (I have selected "show record enable"- a space in the track header opens up, but the button is not present.  Same with "input monitor".

    Look at all the posts in the forum from users with similar problems, it happened with the last Logic update.

  • Record enable buttons missing on Audio track headers!?

    They were there previously. There is even an empty space for them which disappears when I uncheck the record enable button when I go to configure track headers window. If this has happened to anyone, please tell me how to get them back. This now on all projects (9.01).
    Thanks, Confused

    Yep, this has changed in L9, as you can now choose different devices for In- and Output you will miss the recording buttons if you don't have an Input selected.

  • Record Enable Button

    I've followed the manual, but I still can't get the record enable button to appear on my audio tracks.Can you help?

    What do you see on your audio tracks?

  • No record enable button

    Hi, there is no Record Enable button between the Mute and Freeze button. I can't for the life of me remember how to put it there and can't find it in the reference guide or within the forum. How do I make it show up in the Track List?
    Many thanks, Ros

    Thanks a million Steve. I'm not a Garage Band user, but today I was able to record directly into it using the Built-in Input. It automatically set the source as "Stereo 1/2 (Built in input)", so at least I know that the computer Audio Input is working.
    I don't know how to load it as a Logic project, but I saved it as a "Compact Project" to export it to iTunes. Then I imported the audio file into LE. I have the audio file, but not the Record Enable button.
    So finally, I re-installed LE....guess what? Still no Record Enable button, not even in the Tutorial song. I used the Logic Set-up assistant again and chose Built-in input as the driver, rebooted. It tells me it will use the Built-in Inputs as it starts up. It shows Built-in input as the driver in the Core Audio LE preferences, but shows No Input in the arrange window when the Audio track is selected. If I touch Built-in input (as the driver) in the Core audio LE preferences, it disappears from the list of drivers (the only other one is Built-in Output) and asks me to reboot to launch CoreAudio, then the whole process starts over again.
    I did a fairly extensive search in the forum (several pages) before posting my question, but I'll go back through it again.
    The LE7 Manual just states that you should click the record Enable button on the Arrange channel strip. The problem is, it ain't there!
    I really appreciate your assistance and calling up your friend all.
    Thanks, Ros

  • Record enable buttons have disappeared from audio tracks

    The record enable buttons have disappeared from audio tracks.  How do I get them back?

    Try control- or rightclicking a Track Header and...

  • Record enable button on garageband

    unable to find the record enable button in the track header on garageband

    Same problem.  I have an Onyx 1620i mixer, late-2013 Macbook Pro.
    Core Audio on the Macbook recognizes the Onyx and its multiple tracks.
    When I create a track in Garageband (using Microphone/Line option) then during setup Garageband asks me to select which of the 16 channels on the Onyx I want the track to record.  The track then shows input level bouncing around as sounds are made on a mic connected to the mixer on the appropriate channel.
    Everything seems to be working fine!  Except no Record Enable button appears on the track.  Can't record the audio that appears to be coming into the computer just fine.
    I am aware that there are issues with Mackie mixers after OSX 10.7.1 (or 10.8 with some models).  Mackie hasn't bothered to keep up to Mavericks.  However I didn't think the issue was "doesn't work at all", but that there were some latecy problems that can cause hiccups.
    So, despite appearances Garageband can't record from this device?  Or am I missing something else to record-enable a track?
    Thanks in advance for any advice about resolving this, or even advice about an excellent Mavericks-capable device that will allow me to mix about 16 external inputs into the Macbook Pro.

  • ICloud update 3.0.1 40 has removed my sync buttons in Outlook 2007. I run it as admin but the add in is "unloaded" and will not install :-(

    I am about to get a nervous break down from this. FINALLY I got my 2 iP5 and my 2 Win7/Outlook 2007 PC's to work and sync together. This latest update did remove that add in and it's impossible to install / load it. Tried as an admin but of course no result. I hate this so much that I am glad I don't meet any of you Microsoft or Apple guys who produce this updates. WHY NOT DO A BETTER JOB?

    I have now got my "buttons" back ("Refresh iCloud" & "Notifications"), but in spite of that my shared calendar does not sync the events I insert in my PC Outlook 2007 to my other 3 devices.
    Events between my 2 iPhones (iP5/OS 7.0.4) work fine, even with my other Win7 PC.
    All was fine until I updated my iCloud a week ago... :-(
    I have now - as an admin in Outlook - under Tools/Trust Center/Add ins activated the iCloud Add-in, so it is not any longer Deactivated (?)
    Under Help / Outlook 2007 - under Disabled Items the add-in is now removed. It was there even after it had been removed from the Trust Centers Disabled Items..
    This is honestly the most stupid way of using nice time (thank god it's raining today and my golf was cancelled.. )

  • Record enable button not showing up in logic pro x?

    it is checked under the "configure track header" box and even has a blank space for it ("input monitoring" button is slid to the right), but is invisible. checking and unchecking "record enable" slides the "input monitoring" button right and left. this isn't an issue with the built-in mic on my comp but does become an issue with my m-audio fast track. i have the fast track set as the input and output and can hear the microphone through the monitoring (although i don't think any added effects are present in the microhpone monitoring). it just cannot record. what? is this a driver issue or something? logic displays the interface correctly with the name and everything. thanks for any help.

    Look at all the posts in the forum from users with similar problems, it happened with the last Logic update.

  • Strange Record Enable Button Behaviour

    The record-enable (and record monitor) button requires multiple clicks to respond. Also, record cannot be disabled on a track during playback. Am I alone in finding this a little odd and annoying?

    OK, just tried it, but I can disable  R buttons during playback with one click, on audiotracks and on software instrument tracks. Is your project on the edge of overloading the CPU? That can lead to buttons and knobs becoming less responsive. It could also be that you have a project that was started in LP9  - there's often some misbehaviour, it seems.
    How does it respond in a newly created project?

  • E52 firmware update has removed very useful clock ...

    When the E52 keypad was locked, I found out that pressing down on the multi directional key, the time was displayed white on black. So it was possible to see the time without unlocking the phone. This was particularly useful at night time. Now having install the latest firmware update to Software version 031.012 and Custom version 031.012.202.01 I now just get Press 'Unlock' to activate keypad.
    Why has this been removed?
    Is there some set up to get it back?
    Was it a known feature previously?
    Can the next firmware update please restore this feature.
    Thanks
    Tim

    timst wrote:
    When the E52 keypad was locked, I found out that pressing down on the multi directional key, the time was displayed white on black. So it was possible to see the time without unlocking the phone. This was particularly useful at night time. Now having install the latest firmware update to Software version 031.012 and Custom version 031.012.202.01 I now just get Press 'Unlock' to activate keypad.
    Why has this been removed?
    Is there some set up to get it back?
    Was it a known feature previously?
    Can the next firmware update please restore this feature.
    Thanks
    Tim
    Reset the E52. Dial *#7370# 12345 reformat, you'll lose all data. Make a backup first and restore without the settings.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Maybe you are looking for