10.0.9 to 10.11 update issues - re: project files not updating

#1 - I understand the function of libraries/events/projects in the 10.1+ version of Final Cut X, so this is not a case of not being able to identify projects contained within an event.
FCPX simply refuses to update projects created in an older version (which is unfortunate).
Events are imported without issue.
Is there some type of workaround? I am just getting an error that quits cancels the update process without giving me reason.
40 minutes of searching through google lead me to posing this question.
Thanks

Solved the issue:
I had multiple folders/subfolders which contained all of my old projects (this hierarchy was created through pre 10.1 file system organization). the point is I just moved all of the project folders to the "Final Cut Projects" folder at the root of the drive and all was fine.

Similar Messages

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
/Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
Now launch InDesign and see if the problems are resolved.
If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
Let me know if any of these suggestions work for you
I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait.

1st LR3 issue. PSD files not retaining star rating on edit in cs4

When editing in photoshop and then saving the psd file lightroom correctly imports the file back in but it doesnt save the star rating back into lightroom... An issue if you edit in filtered mode like I do... as you have to remove the filter, star it and then filter again... LR2 didn't do this...
Any ideas?

I'm getting this too. The reason (for me at least) why this is a major pain in LR3 is because by the time I decide to edit in PS I've done selections using star ratings. So by this time I'm filtering using star ratings.
With this bug, the TIFF/PSD disappears until the filter is removed - as I said, major pain.
I'll use the circumvention but it's a real nuisance.
Selby

Anyone else having issues with folders / files not showing or showing stragely?

Device: MacBook Pro (Retina, 13-inch, Mid 2014)
If I open a new window from the desktop (Apple N), the folder either shows it's empty (even though it it's not) or the text has black bars over, or the text is jumbled.
My downloads folder is actually full of files, but shows empty:
Funky text (I intentionally blurred parts of the images, but the fonts get jumbled on their own):

I have a mid 2010 mini (with Mountain Lion) and I just recently noticed I was experiencing this problem.The timezone thing didn't work for me.
I *may* have fixed it though. I went into the Security / Privacy settings, selected the privacy tab, and *there* turned off location services and turned it back on.
I think that worked - keep your fingers crossed! (So far, so good.)

NWDI Issue : The project is not in DTR

Hi Friends,
We have created a NWDI based project. 2 peoples are working on same NWDI based WD project on 2 diff view. After Sync the project its not allowing the other person to edit the project .Its giving the following error.
The operation requires the writeability of the following Objects:
The project is not in DTR, but there are readonly files!
Component Controller com.ibm.wcm.repord.ui.searchrepairorder.SearchRepairOrder
        readonly: C:\WCMworkspace.jdi\0\DCs\ibm.com\wcm\repord\ui\_comp\src\packages\com\ibm\wcm\repord\ui\searchrepairorder\SearchRepairOrder.wdcontroller.xlf
        readonly: C:\WCMworkspace.jdi\0\DCs\ibm.com\wcm\repord\ui\_comp\src\packages\com\ibm\wcm\repord\ui\searchrepairorder\SearchRepairOrder.wdcontroller
Please Help.
Regards,
Mithu

Hi,
Find the similar solutions under these:
error while trying to modify a project using JDI
Error :    The project is not in DTR, but there are readonly files!
dtr problem
Hope of any help.
Cheers,
Swathi
Do offer pts

OCR works without issue on some files, not others?

Acrobat 10.1.1
While working with converting presentation slides to OCR and exporting them I am only able to get some PDFs to properly OCR. I am using the same process though it seems it simply won't take on some while it does others.
Tools > Recognize Text > In this file > (Default settings) Ok
and yet I get different outcomes.
Is it possible that background colors/type color/font etc. are conflicting with the OCR process? Again keep in mind these are presentation slides that have been converted into PDFs that I am attempting to OCR for export into Word.
Thanks.

Most of the time you would not be able to OCR such documents because they are not pure graphics. OCR in Acrobat can only be done on pure graphics. If there is else on the page, OCR will not work. A work around is to save the document as a TIFF and then import all the TIFF files produced into a new PDF and run OCR on that. Be careful to use a high enough resolution, the other aspect than can cause OCR to fail (there is a minimum resolution -- 200 or 300 dpi).

File Not Found / Fade Update Failed Error -43

I have been getting two errors all of a sudden when instigating playback in the Arrange window in Logic 9.
File Not Found Result Code -43
and
Fade Update Field Error -43
I have googled information on this and have tried the following:
Used "Save As" and changed the name of the project file
Removed automation at the start of 3 tracks where i have automated in a gradual increase in volume
Gone to the Audio menu and selected "Delete Fade Files"
None of the above have worked. I have not used the crossfade tool to add a fade to the start or end of a track, i have only created a fade effect by using Volume Automation.
There seems to be other people having the same problem but i haven't found any with the -43 error code.
Does anyone know what that code relates to?
Have you any suggestions as to how i can get rid of this error?
Thanks

I recently had issues with a "File Not Found" error, though it was a different code #. (-61, or something similar.)
I was trying to move a track from my old G4 and work on it on my Macbook Pro laptop.
The problem turned out to be related to file permissions.
Logic is not a network-friendly program, and OS X is hyper sensitive to permissions, so to access a file that was originally stored on another computer, I had to do two things:
"Get Info" for the drive (it was not a system drive) that the original file was stored on, and check the box at the bottom:
"Ignore Permissions on This Volume"
From the user account on that computer, I then copied the file from the internal drive to an external firewire drive which also had "Ignore Permissions" checked off in the "Get Info" window.
I could then access the file from my user account on the laptop.
Once I did those steps, the "File Not Found" error no longer appeared.

Can't update 10.6 to either .3, .4 or .5, max files not an issue

HI
Sorry if this has been answered elsewhere, but I've done plenty of browsing and got nowhere close to finding a solution.
I have a 21" iMac which hangs every time I try to run the software update. It gets almost to the end (moving items into place) and just hangs stating install time remaining about a minute. I've left it sunning all day and no result. There are no error messages in the log file, in fact absolutely nothing after the --- begin install --- line.
I have checked the max file setting and its set to unlimited, also ran disk and permissions repairs, tried reinstalling from the original disk (but not wiping the drive first). Started with the 10.6.4 update, then tried 10.6.5 and then 10.6.3. All fail at the same place and the machine fails to reboot, just hangs with the spinning ball :o( I even uninstalled the virus checker.
I'm reluctant to wipe the drive as I don't fancy having to start from scratch again. Might also be worth pointing out that I used the migration wizard when setting this machine up. Also, tries downloading the dmg etc. and got exactly the same result as I did doing the on line update.
Any help would be much appreciated.
Cheers
Mark

Hi
Figured it out (or fluked it and missed something completely :o)
*Problem Summary*: 21" iMac couldn't run software update (any version of last three), got as far as moving items and hung. Reboot would then hang and had to restore to backup. NO ISSUES WITH MAX FILES. Note: Also had previously uninstalled trend micro smart surfing and then sophos anti virus. Despite being removed weeks ago Trend had left behind (I believe) two processes: 1) iCore plug in manager and 2) iCoreServices. Also note that iMac had been set up using set up assistant and I have deleted a redundant non-admin user account.
Solution: Repaired permissions and disk, rebooted in safe mode, used Terminal to kill the iCorePluginMgr and iCoreService processes and then ran the update (10.6.5) from a local downloaded disk image.
Would be interested if anyone knows how to permanently kill these processes?
Thanks, at last :o)
Mark

I can't find my projects! Not an updating issue.

Okay, so I have iMovie version 10.0.2 for the MacBook Pro and I have edited a video twice and then closed iMovie expecting for it to automatically save only to open iMovie again and not be able to find the project anywhere! Sorry if this is a stupid question but other people's questions only seem to be addressing updating problems, but I made these movies (uploaded the clips and editing them) completely after updating iMovie.
I took a screenshot of this **** and look! Under the "All Projects" tab, it says I have 6 items, but it isn't showing the 2 videos I already edited, and similarly, if I try and make a new video and try and name it the same as my disappeared project, it says that the name is already taken.
I have all of my projects under one folder if that helps.
Thanks!

Its generous to award me 10 points since I don't have a solution. If I had time it would be interesting to deliberately creare a project with the offending symbol in the name and go into the library and see how one might rescue it. (create project with legal name, copy project file, then rename project with illegal character and see what has changed in the project file)
Apple should at least document this bug and preferably prevent the use of apprently illegal project names.
Geoff.

HT4528 i am having problems since downloading ios8. app freezing, display orientation locking up, calls coming into multiple phones associated with same apple id. Anyone else having these issues? i did not download the update

i am having problems since downloading ios8. app freezing, display orientation locking up, calls coming into multiple phones associated with same apple id. Anyone else having these issues? i did not download the update

No. But thank for asking.

My iTunes wouldn't update and so I tried to reinstall the new version, my computer restarted and when I clicked on iTunes, it said file not found.

I tried to update my iTunes so I could put some songs onto my ios 7 device and it wouldn't update. I would get a fail message. I went to the apple website and reinstalled it. After my computer restarted, I clicked on iTunes and said file not found. I looked everywhere but could not found a working application link. Help!!

Hi Applefan 6968,
If you are having issues updating or reinstalling iTunes on your Windows machine, you may find the following articles helpful:
Apple Support: Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Regards,
- Brenden

Issue with rule file and Substitution variable

Hi All,
I am using Essbase 9.3.3
I created a rule file with 5 dimensions in which 3 dimensions I defined in columns and two dimensions I gave it as header in data column with comma seperated.
Among those two dimension members, one is an account member with "/" in it within quotes and other is a substitution variable.
The member assigned for that Substitution variable has a space in between and is updated within quotes in variables list.
When I try loading data, I am getting an error saying that two members are not valid.
Eg: "Tax/Unit",&Scenario is not valid.
&Scenario - "Budget Q1"
Can some one please suggest on the issue.
I am not facing any problem in calc scripts or reports scripts using the substition variable.
Thanks in advance

Mark,
Modifying the default files is dangerous and ill advised. You could always just add a style sheet (inline or linked) to your application that overrides that one setting while you wait on the permanent fix.
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen

H61MU-E35 (B3) Updating BIOS....File Not Found Error

I have MSI H61MU-E35 (B3) Motherboard with Intel i3 CPU.
I downloaded latest BIOS File 7680vC3.zip (on web page it's says Version: 12.3 from -> -www.msi.com/support/mb/H61MUE35_B3.html#down-bios
Using Windows XP OS From 7680vC3.zip => Extracted E7680vC3.exe => Placed on USB Drive (I did not format USB Pendrive, and used by just making it empty by deleting files) ==> Ran this exe file on the computer where this motherboard is....
Inside Windows XP, when BIOS Update process started, In a green window, it shown me current BIOS old version and New Version side by side. (I did not given much attention to notedown from which number to which number it's updating).
In Windows XP after BIOS Process completed, it restarted computer (I kept USB File as it in the computer as I had read that, I have to keep USB in computer after restart).
When computer restarted...nothing came on the screen and just blank screen for long time and on the right side on screen bottom corner only letter like: A2 stayed for long long time. I waited for 15 minutes but nothing was happening except blank screen...
So, I restarted computer....and kept USB as it is in the computer....but Nothing comes on the screen...
After I concluded that, something is wrong, to resolve the issue...
--- What Try and Experiments I have done ----------------------------------------------------------------
(1) I placed Restarted computer without USB: and Message comes on the screen is:
BIOS Update is not yet completed, please insert the USB pen drive and reset system.
(2) I refered some forums, and also contacted MSI Support. As suggested, I formatted USB Drive with FAT32 and placed E7680IMS.C30 file (only one file) on USB placed in computer and started computer.. Now Message is coming:
Updating BIOS...... File Not Found..
Note that: E7680IMS.C30 File was given to me by MSI Support Staff as I did not kept Original files during formatting USB PenDrive.
But computer is not looking for .C30 Rom File, Computer is looking for .BIN File
(3) I have remove the battery and waited for 5 min. and placed again, to reset BIOS, but not difference on result or on message...
Renamed: file E7680IMS.C30 to EIVB.BIN
Result: Just Blank Screen with A2 text on right side bottom corner, No other message
In some other same issue post, they recommand to change ROM File name to: EIVB.BIN which worked for others, so I also tried and renamed: file E7680IMS.C30 to EIVB.BIN, in this case, I was able recreate original Issue: When computer boots, Screen stays completely Blank, and on the right side bottom corner, only 2 digit tect comes is: A2. Computer does not give any other message and nothing happens...even I waited for 30 minutes...
Also, by looking at USB Pendrive light, I can tell that, motherboard is reading file on the Pen Drive...
Renamed: file E7680IMS.C30 to E7680IMS.BIN
Result: Message comes on the screen: Updating BIOS...... File Not Found..
(5) What I am thinking is: When motherboard power-ups, it's giving me two different type of Valid message based on if USB is in the computer or not, based on if file name is .BIN or not, so I believe motherboard is still not dead and there are hope to feed the file which motherboard is looking for. But issue how to find what specific file which it's looking for... Even sometime I have seen at screen right side bottom area, 2 Digit numbers are changing just like system is doing internal healthcheck before booting up...
(6) Note that, I would like to put old version file on USB to feed, but one of the biggest issue with MSI is, once you download EXE from their website, to Extract EXE file content it needs to be run on the same motherboard computer, so in my case, if your motherboard is not in bootable cituation then you can not extract any other BIOS File to try...
Please help me...by havin this computer down....I am suffering everyday...
(By profession, I am electronics Engineer and have worked with programming Microcontroller and bootloaders, but in this case, I do not have SPI Programmer to program BIOS chip externally.)

Thank you flobelix and Nichrome.
Quick Result Summary: 128MB USB Key formatted FAT32 with HP Tool, made MS-Dos Bootable and placed EIVB.BIN file given by flobelix, but final result is: Screen comes Blank and only shows "A0" Code at right side bottom corner. nothing else.
Detail
Since Flobelix proviced ROM BIN File, I was too exicited to try it out and here is what I did...
(1) As per Nichrome link for HP USB Format Tool, I installed it on "Win XP" machine, and formatted 128MB USB key by selecting "FAT32" and selected option to make "MS-DOS Bootable" and shown Win98 source files as per the instruction.
-128MB USB drive made bootable with FAT32.
(2) I downloaded EIVB.rar given by flobelix and extracted and copied EIVB.BIN file on USB root.
Inserted USB in MSI and powered up...
As soon as I give power: Imidiately one normal beep and Screen comes completly Dark Blank. No message about "File not found". only at right side bottom of screen, it shows "A0".
I inserted USB key in each and every USB slot, but result is same: Screen stays Blank and on right side corner only "A0" letter.
I given around 3-5 minutes time to see something changes on screen, but no change.
- If I power-up computer without connecting any USB Drive: then message comes on screen that: Bios Update has not completed, please insert USB Key and Reset System.
- On USB Key, If I put ROM File with any other name (except EIVB.BIN) then Message comes: Updating BIOS... File Not Found...
- I have removed battery to give a try for resetting BIOS, but not change.
Question:
(1) Is it possible that, motherboard is looking for specific version of File or some different version of file ? and just staying silent and not complaining for existing EIVB.BIN ?
Here is I experiment: I simply created empty text file (0 Byte) on USB Drive and given name EIVB.BIN and booted up computer and same result: Blank Screen and just "A0" on right side bottom corner.
So, it tells me that, when power is given, the program which executes in motherboard for BIOS, it is not able to identify real or fake EIVB.BIN. I think, it's looking for some specific file and when not found, it's getting confuse on what to do....and not saying anything on the screen....
Has anyone old version BIN file of H61MU-E35 (B3) ?
Is there any trick so I can download older version Packaged EXE from MSI website and extract it ? I can give a try....

Issue in Project Performance Report

Hi,
I'm facing several issues in Project Performance Report (PPR), although the setups seem to be correct.
The Project has a scheduled start date of 02-Apr-12 and end date 14-Nov-13. The transaction start date is 31-Mar-12 and end date is 14-Nov-13.
We entered some transactions (preapproved batches) for the dates 31-Mar-12, 01-Apr-12 and 6-May-12.
Ran the cost distribution program, viewed that the exp items are cost distributed.
Then ran the Update Project Resource and Base Summaries Data program followed by the Update Project Performance Data but the PPR page did not show the actual data.
Post that ran the Refresh programs and actual cost data was visible in the Task Summary and Resource Summary pages of PPR but not in the main page.
Ran the Refresh programs again and now the actual cost data is displayed in the main page but in the Task Summary and Resource Summary pages the actual cost has got doubled.
So two issues:
1. Why it did not populate the actual data once we ran the Update programs?
2. Why has the amounts got doubled in some pages?
This is very critical. Any insights would be of great help. This is happening for a few projects. I must say the behaviour of the PPR programs is very inconsistent. You never know what to expect.
Regards,
Sri

Hi,
I'm facing several issues in Project Performance Report (PPR), although the setups seem to be correct.
The Project has a scheduled start date of 02-Apr-12 and end date 14-Nov-13. The transaction start date is 31-Mar-12 and end date is 14-Nov-13.
We entered some transactions (preapproved batches) for the dates 31-Mar-12, 01-Apr-12 and 6-May-12.
Ran the cost distribution program, viewed that the exp items are cost distributed.
Then ran the Update Project Resource and Base Summaries Data program followed by the Update Project Performance Data but the PPR page did not show the actual data.
Post that ran the Refresh programs and actual cost data was visible in the Task Summary and Resource Summary pages of PPR but not in the main page.
Ran the Refresh programs again and now the actual cost data is displayed in the main page but in the Task Summary and Resource Summary pages the actual cost has got doubled.
So two issues:
1. Why it did not populate the actual data once we ran the Update programs?
2. Why has the amounts got doubled in some pages?
This is very critical. Any insights would be of great help. This is happening for a few projects. I must say the behaviour of the PPR programs is very inconsistent. You never know what to expect.
Regards,
Sri

Issues using Project 2013 with SharePoint 2010

I'm a SharePoint Admin and a few users have come to me with issues related to checking in Project 2013 files. The scenario they describe is this:
Project 2013 file is saved and checked in to a document library
User opens the file and selects edit from the dialog menu.
The time the document is open varies, from a few minutes to over an hour
User is logged in as [email protected]
They can close the file, select check in, and update the file in the library
Once they try to open the file again, they are given a message saying that the file is checked out to server\user and asks whether they want to view a read only copy
Saving is disabled because it is read only
If the user tries to close the file, they are given the option to check in the file
Sometimes the file will check in and other times it will not.
Has anyone run into issues like this before?

Hi CjMOrr85,
Second time when you open the project file, which option do you select. "Read-only" of "Check-out to Edit". If you are using "Check-out" option, you should not have any issues.
Happy troubleshooting....
Vikram Daruru - MSFT

10.0.9 to 10.11 update issues - re: project files not updating

Similar Messages

Maybe you are looking for