10.1.0.4 upgrade to 10.2.0.2 advice

Hello,
I would like an advice about how to upgrade from 10.1.0.4 to 10.2.0.2 under Windows.
1) Would you use the upgrade assistant?
2) Would you export/import to another machine with the new software already installed?

Hello,
I'm a bit lost here.
Are you talking about a "simple" DB upgrade, in that case you can use the upgrade assistant ( or upgrade it manually as you wish, oracle recommends DBUA )
Or are you talking to move the DB to a different server, in that case the answer depends a lot.
If both OS are windows, I would perform the ugrade and then backup and restore ( probably faster than exp/imp ) on the second machine.

Similar Messages

I am running 10.9.4. on an older Mac (mid 2007). My iPhoto is 7.1.5. I have no access to photos on iCloud. The icon does not even appear. I've been told that an iPhoto upgrade may not solve problem. Advice?

I have no access to photos on iCloud. The icon does not even appear on my mac or in iCloud.
The Mac is running 10.9.4. on a mid 2007 model.
My iPhoto is 7.1.5.
I was told that my system was too old to support the required upgrades that would allow me to to see photos on iCloud; thus, I should not be the latest iPhoto. Accurate?

All you need to do is upgrade your iPhoto to iPhoto 9.5.1 thru the App Store. This screenshot shows which previous versions of iPhoto are compatible with Mavericks. It also indicates which versions qualify for a free upgrade to iPhoto 9.5.1 and which require a purchase:
Note 1: every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
Note 2: If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1

Upgrading For 7 to 8 any advice

Hi Folks
I've just ordered 8 and will be driving in at the deep end, I am just looking for any advice on upgrading to help with as smooth transition as possible, I have a good number of third party plugins, UAD, Powercore, PSP, RMX, Melodyne, and many more, so would the advice be to install 8 on to the G5 and pray or would it be a case of uninstalling all the software and starting a fresh (which would be a nightmare and very time consuming) i.e start with a fresh install of Tiger and go from there or just with the install 8 and then re-install the plugins
TTFN
Subcoustic

Back up the entire drive just in case.
Install Logic 8. Logic 7 will still be there, as will your plugins, you don't need to reinstall those, they are just AU plugins that Logic 8 will see.
If some plugins need to upgraded for Logic 8 because you're running very old versions, then you'll need to upgrade those, otherwise, it's not much of a biggy.

HT201210 The apple logo is flashing on my iPad but it won't turn on since upgrading to i OS6. Any advice?

I upgraded my iPad as directed, connected to iTunes and now my iPad won't turn on. I've tried the reset option, but still nothing. Any suggestions?

Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad

RSO3middletierservice message - unable to upgrade to ELearning Suite 2.5 - advice?

After acceptance of the new serial number for eLearning Suite 2.5 (upgrading from version 1), screen message states:
Please close all of the following applications to continue:
RSO3MiddleTierService.exe
This application does not show as a 'process' in the Windows Task Manager.
Any help on how I close this application to continue with the installation would be greatly appreciated.
Many thanks.
Mike Clark

Hello,
Welcome to Adobe Forums,
For Windows 7 : Click on "Show Processes from all Users" Under Process Tab of Windows Task Manager
For Windows XP : Check "Show Processes from all Users" Under Process Tab of Windows Task Manager
Once you see RSO3MiddleTierService.exe process, Kill it and then Installation will move further.
Thanks,
Vikram

Hi all. I have upgraded to 10.6.8 Snow Leopard on my Mac Pro but still cannot connect to App store to upgrade to Mountain Lion. Any advice?

Hi all, I have upgraded to 10.6.8 Snow leopard on my Mac Pro but still cannot connect to App store. I want to connect to upgrade to Mountain Lion but ony get the message "you are not connected to App store" or "Check your internet connections, error -52". My internet is working OK for everything else.Any advice?

Then I will have to assume a faulty installation.
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Mac OS X 10.6.8 Update Combo v1.1.

Requirement to upgrade OBIEE 10g on Windows to OBIEE 11g on Linux

Dear All,
I have a requirement to upgrade OBIEE 10g from current windows 2003 environment to OBIEE 11g Linux environment.
I went through forums and many threads on upgrade, everywhere they talk about Upgrade Assistant (UA). And oracle documentation says ,
+"Do not change from one platform or architecture to a different platform or architecture as part of the upgrade process.+
+For example, if the existing 10g system is running on a Windows 32-bit platform, do not install Oracle BI 11g on a Linux 64-bit platform and then run the Linux 64-bit Upgrade Assistant to upgrade the existing 10g system."+
But there would certainly be scenarios with other users the way I have. Then what is the way out to do this upgrade?
Can anyone give some advice on this. It is little urgent.
Thanking in advance.
Regards,
Deepika.

Thats are huge change in platform. win32 to linux 64.
Yet what we upgrade is only
catalog and rpd.
this might involve some manual change if UA cannot complete successfully.
Its better to do a prototype before the actual upgrade as recommended by Oracle. This will show what can the possible issues and road blocks.
Edited by: user10615659 on May 23, 2013 11:22 AM
Edited by: user10615659 on May 23, 2013 12:26 PM

CS5 upgrade from CS4 - plugins question

Hi -
can anyone refer me to a list of steps to move all of my plugins from CS4 to CS5 as part of the upgrade?
My plugins are:
Anthropics portrait pro 10
Image Trends - Fisheye hemi, pearly whites and shine-off
Nik Software - NIk sharpener, color efex, silver efex
onONE - mask pro 4
picture code - noise ninja
Power Retouche
Photo Frame 4
PhotoTools Pro 2.6
I don't really want to run both versions of photoshop... I've done that in the past and never once went back to the old once I upgraded... but open to advice there, too.
thanks,
tom

Tom O'Connell wrote:
You used to be able to transfer them to the new version without reinstalling... is that not possible any longer????…
Read my previous post again:
You can only use those plug-ins in CS5 that have been upgraded by their particular software developer to run in 64 bits.
CS4 and earlier versions of Photoshop were 32-bit Carbon applications. CS5 is Cocoa and runs in Snow Leopard in 64 bits. You will need to get the updated 64-bit versions of your plug-ins from each of their developers.
Otherwise you'll need to run CS5 in 32 bits, with a corresponding loss in performance and any other consequences of running in 32 bits.
Wo Tai Lao Le
我太老了

How to correct battery drainage problem after upgrade to mountain lion

My macbook pro battery drains very fast, just used 3% as I am entering this question. This rapid battery drain started after upgrade to mountain lion. Any advice?

This appears to be a problem that's affecting a number of users and has been widely reported. My guess is you're going to have to wait till they do a software update.
There's general tips for conserving battery power on my page here that might ameliorate matters in the meantime:
http://applehelpwriter.wordpress.com/2012/04/23/how-to-make-your-battery-power-l ast-a-bit-longer/
Be sure to report the problem to Apple directly here:
http://www.apple.com/feedback/
- every extra complaint helps to add a little urgency.
(ToU Disclaimer: this link to my site contains other links which promote my services as a technical writer)
Message was edited by: softwater

Upgrading to Captivate 8 with Technical Communication Suite subscription

I have a TCS5 subscription which includes Captivate 7 - I would like to upgrade to Captivate 8. After advice from Adobe help team, I have uninstalled existing version of TCS and downloaded trial of current version which contains Captivate 8. All programs install correctly but Captivate will only run as trial - even after signing in with my Adobe ID. When installing there was a symbol next to Captivate 32 and 64 bit which says it will only install as a trial. Is this available for existing subscription users yet? If not - when will it be available? I was led to believe at the time I got the subscription that I would have access to the latest software when it comes out. Is this not the case?

See the announcement about the Captivate8 and presenter 10 updates for the TCS here: TCS 5.0.1 is here and Captivate 8 and Presenter 10 are part of it ! « TechComm Central by Adobe
There's also this Tech Note: Upgrade to Captivate 8 & Presenter 10 for TCS5 customers

IPhone connections hangs when sending email after upgrade.

After upgrading to 2.0 firmware on my first generation IPhone, the phone now regulary hangs when sending email via smtp. Even if I try to close the connection by putting it into AirPlane mode and back again it still hangs and from that point onwards doesn't check or send any new emails. If I then shut the phone down and restart it looses the email as it's not either in the sent or outbox folders. This has happened quite a few times since upgrading. Does anybody have any advice?

Found this useful tidbit by mdwelsh231 on another thread:
"I'm having this problem too. Rather than rebooting the phone, an even easier solution is to hold down the Home button for several seconds (I believe it's 8 sec) which will kill the Mail application and return you to the home screen. Restarting Mail (by tapping the Mail icon) will cause it to reconnect. I find that this resolves the connection hanging issue. However, it is still kind of a pain. I suspect a bug in the 2.0 iPhone firmware. "
Worked for me
Cheers,
C

Please ask Adobe to re-think upgrade options for Suite owners

I have sent emails, called and tweeted this same message and I hope you will too:
Adobe please stop locking us into Suites. Please let us upgrade from a suite to an individual product if we choose.
I own CS3 Design Standard and I only want PS CS5 and AI CS5. I don't need all the other programs that come with the suite and I can save over $100 by purchasing them separately at upgrade prices.
As it stands now, I will not be upgrading to CS5 because of this policy--it is too expensive.
If you are in the same position, please let Adobe know that they are losing sales due to this policy.

BobLevine wrote:
I disagree with you but I understand your feelings. This has been discussed since Adobe introduced the suites in 2003.
If you have a CS3 suite, you might want to read through this article on my website which might help you save a few bucks on the suite upgrade.
http://www.theindesignguy.com/purchase-advice.shtml
If you don't feel like reading the whole thing, scroll down to the "What's the Bottom Line?" section.
Bob
Although I am not personally interested in updating a single program from a suite, I believe it could be in Adobe's best interest to do so.
Adobe could handle a single or two 'suite' program update to the individual programs in exactly the same way they handle a cross platform exchange/upgrade, i.e. one relinquishes all claim to the original suite by certifying that it has been destroyed and is issued the 'upgrade' in a full package. With a single program or even a two program 'upgrade' of this sort from the 'suite' of programs Adobe would have income they may not otherwise receive and the customer is happy. If it were a three or more single program upgrade then updating the suite would generally be cheaper--as it should be--that's what suites were designed for.
I agree that updating without relinquishing the original suite is not in Adobe's best interest for several reasons.

Wanting to upgrade from 10.4.11 to 10.6 - Am I able?

Greetings, sorry if this has been asked prior, there is a TON of topics here and I became a bit overwhelmed.
I am wanting to upgrade my iMac running 10.4.11 to Snow Leopard. I Understand I need to purchase the entire box set, not just the $29 upgrade. Am I able to upgrade this mac? Yes, I want to purchase an iPhone finally (on Verizon) and I don't want to invest in the upgrade or the iPhone if it's not possible I can upgrade. Also, anyone have any advice on doing this upgrade? Below is more info about my computer. Let me know if I haven't included any info. Many, many thanks in advance.
Model Name: iMac
Model Identifier: iMac4,1
Processor Name: Intel Core Duo
Processor Speed: 1.83 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 2 MB
Memory: 2 GB

Hi Veebs, and not to worry, the number and breadth of posts on these discussions can be daunting.
Your iMac, since it is an Intel-based machine, can be upgraded to SL, 10.6...and you do not need the boxed set unless you want all of the peripheral software that is inlcuded. If you want just the operating system, the $29 special should be fine for you.
Note that the heavy users on here recommend at least 2 GB of memory, which you have, and the minimum of 10 GB free hard drive space would be better if it is more like 30-40 GB free space. At any rate, Mac OS X wants to see at least 10-15% of the hard drive capacity free.
After installing your new 10.6, just go to the free downloads and get the 10.6.6 combo if your installed version is less than that.
Then download iTunes 10.1, 10.1.2.17 is the current version, and you should be good to go with the new iPhone. Next you need to think of the iPad, iPod, oh well.
I also just ordered my new Verizon iPhone...going to be hard waiting a week for delivery

Should apple have an upgrade tool that checks the computer for issues and fixes them prior to installing ML

I had a nightmare upgrade to Mountain Lion after downloading it from the APP Store I went to install and it got to the hard drive and it was greyed out and said it could not install on the startup drive I tried all the solution mentioned already, checking the disk the permissions, time machineetc and then started removing third party apps/software and it still wouldn't install in the end I saved everything I could to disk that I required and erased the disk, re-installed snow leopard and then re-downloaded Mountain Lion and then it installed perfectly and is running fine. I wish to ask if Apple can't make the upgrade process less stressful with some kind of tool that checks for issues prior to upgrading to ML and fixes or advices of any issues. Microsoft have had these kind of tools so surely Apple can do something similar that can advice of incompatibilty issues and fixes so that us MAC users aren't left scratching our heads trying to work out what is wrong, it's poor support when you can't help users get the software you make and sell onto our hardware Apple.

You should let Apple know of your concerns at:
http://www.apple.com/feedback/macosx.html
MtD

Library no longer available in Window menu since yesterday's upgrade?

I upgraded Adobe Illustrator via the Creative Cloud application yesterday and, ever since, the Library option in the Window menu is gone.
I can't see it anywhere!
Is this a bug with the upgrade? I'd appreciate your advice on how to reinstate this feature as it's obviously very useful as I have a lot of assets in there but can't access them!
Windows 8.1 Pro > Adobe Illustrator CC 2014 17.1.0 64 Bit
Hope you can help. Thank you.
NJ

CC Panel told me that it had updated Illustrator - I've no idea which version it was previously so I assumed it had done so.
Thing is, the Library panel was working in my previous version. Anyway, whatever CC Panel did it disabled the Library option in the Window menu.
So...I've chosen Help > Updates in Illustrator and, wouldn't you know it, it hasn't updated at all, despite CC Panel telling me that it has!
I'm just running a 240MB+ update now, from Help > Updates, and I'm hoping that resolves it. I'm assuming this is the upgrade to version 18+, thank you.
It's clear that there are issues with the CC Panel; which is reporting that Illustrator is up to date. Sigh...this means that I'll have to double check this in applications whenever an update is presented in the CC Panel. Sucks.
Thanks Jacob.
NJ

10.1.0.4 upgrade to 10.2.0.2 advice

Similar Messages

Maybe you are looking for