10.1.2.3 Developer Suite patch problem

I've successfully updated our server with patch 10.1.2.3. I'm now trying to update my windows xp workstation that has Developer Suite Version 10.1.2.0.2. Every time I try to install the patch an error displays telling me the following: "The following running services need to be shut down before continuing". The thing is it is listing about 40 items and some of them don't make sense. The following is just a few from the list:
COM+ Event System
Remote Registry
PmI Driver HPZ12
Themes
Windows Audio
Windows Time
These are just a few of about 40. Any suggestions?
Thanks,
Whitney

I've come across this problem a number of times when using Oracle's universal installer on a machine that already had an old Oracle install. I always got around it by finding the file oci.dll in the old Oracle install and renaming it to e.g. oci.dll_old, and restarting the PC. The new install would then work fine, without any complaint about services.
I'm not sure if this is appropriate in this case, though, as you're patching rather than replacing an existing install.
James

Similar Messages

9i Developer suite login problem. help needed ASAP

i installed oracle 9i developer suite, my problem is i can't login. this is the error ora12560: TNS: oracle adapter error.
or
if i put the hostname it displays a no listener error and closes. i tried to create a listener in net configuration assistant, but i can't see it in services.
i'm using windows XP. and not conneted to any machine.
do i need any changes on my window settings?
please help...
thanks
here is my listener.ora
ABC =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = abc)(PORT = 1521))
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = abc)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\OraHome)
(PROGRAM = extproc)
tnsnames.ora
TEST.ABC =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ABC)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = test.ABC)
ORACLE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = abc)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = oracle)

check your operating system network protocole is TCP/IP is installed if so check is there any problem with these protocoles. this error is encounter generally due operating system network protocoles it is not an oracle error. here is discription.
TNS-12560 TNS:protocol adapter error
Cause: A generic protocol adapter error occurred.
Action: Check addresses used for proper protocol specification. Before reporting this error, look at the error stack and check for lower level transport errors.For further details, turn on tracing and re-execute the operation. Turn off tracing when the operation is complete.

Problems installing Development Suite Patch 10.1.2.3.0 on Windows 7 (32-bit)

Hi all,
I'm trying to install Oracle Development Suite 10.1.2.3.0 on Windows 7 (Service Pack 1 with fairly current Windows Updates) according to Metalink Document 1292919.1.
Everything work just find until I try to install the 10.1.2.3.0 Patchset (Patch Number 5983622) as outlined in Step 5 of the aforementioned Document.
During the step labelled "Copying files for 'Oracle Universal Installer 10.1.0.6.0" I get the following error message twice:
"javaw.exe Entry Point Not Found"
"The procedure entry point GetProcessImageFileNameW could not be located in the dynamic link library PSAPI.DLL".
I acknowledged both of these messages and rest of the installation process runs fine.
I'm not not sure about what to make of these messages, will my installation work correctly or will I have to cope with further issues related to this?
My search on Metalink did not turn up any results related to the Development Suite. I already checked if there were multiple versions of psapi.dll were present on the system as mentionned in Documents regarding this problem while installing Oracle client 10.1.0.5.0 but there is only one.
Any help is apreciated!
Chris

Hi Chris,
Answer to the question is provided on threads:
Install errors - Entry point not located in PSAPI.dll; Package load failure
PSAPI.DLL installation error
Hope this answers your question
Thanks &
Best Regards,

ICON in Oracle Developer Suite 10g Problem

Hi,
I have installed Oracle Developer Suite [32 Bit] Version 10.1.2.0.2 (Production) on my note book.I am able to compile forms which are developed in FORMS 6i
but not able to show the icons ...
The following Steps i have followed:
1.Oracle Developer Suite Installed
2.FORMS_PATH ,REPORTS_PATH and UI_ICON has been set in both Registry and default.env
My Application Folder setup is as follows :
     D:\iAFRES\APPLICATION\FORMS
                                       \MENUS
                                       \REPORTS
                                       \ICONS
   The registry variable values are as follows:
         FORMS_PATH=C:\DevSuiteHome\cgenf61\admin;C:\DevSuiteHome\forms;D:\iAFRES\APPLICATION\FORMS;D:\iAFRES\APPLICATION\LIB
         REPORTS_PATH=C:\DevSuiteHome\cgenf61\admin;C:\DevSuiteHome\forms;D:\iAFRES\APPLICATION\REPORTS;D:\iAFRES\APPLICATION\LIB
         UI_ICON=C:\DevSuiteHome\reports\plugins\resource;D:\iAFRES\APPLICATION\ICONS
All the icons i have converted to gif format since ORACLE DEVELOPER SUITE 10g does not support ico files. Path for the same has been set in registry.dat like
    D:\iAFRES\APPLICATION\ICONS
After doing all the above activities i am not able to show the icons ..Please tell me what to do to resolve the issue and provide me the steps for Application Deployment in Oracle 10g Developer Suite for Development purpose
Thanks
Dhabas

here
Displaying ICONS in forms(Linux)
or create jar.
How to create jar for icons
sarah

Problem Installing Developer Suite on WIndows Vista

Hi! i'm a student of computer science, and i need to install developer suite for a proyect i need to do for one of my classes.
I have a problem installing developer suit on Windows Vista. After i download and unzip both disk, i run the setup from the installer folder and i get an alert that says: "abnormal termination. There's been an internal error. Send the following files to the Oracle Suport Services: Unknown, Unknow, Unknow". I've also tryed with the setup from the main folder and i get the same alert. I don't know what to do, i've tryed setting the compatibility mode to windows XP, runnig as administrator, changing the performance configuration of my computer and nothing. Please help me to install the program!

Which developer suite are you using???

Problem installing Oracle Internet Developer Suite 1.0.2.4.1 (Forms & Reports 6i)

Hi all,
I am unable to install Oracle Internet Developer Suite 1.0.2.4.1 - specifically Forms & Reports 6i, Designer, Discoverer (ALL Products on Quick Install option on Windows 98 system). The installation proceeds to Install screen when the various files start to load ... Then the whole process stops after showing 100% load (sometimes the screen freezes, sometimes I get error message - illegal instruction etc) when the following file is being loaded :
Extracting ... ewt_swingaccessbridge.jar
I have another question :
I have Personal Oracle 8i (8.1.7) installed on D:\Oracle\Ora81 already.
During the install process (before I get the above error message) the 8.1.7 RSF-based product install location screen presents itself with the option to create a new Oracle Home and location (The preferred Oracle Home name iDSData and preferred Oracle Home Location D:\ORACLE\iDSData are already entered in the boxes) or Select an existing ORACLE_HOME. My existing ORACLE_HOME is
D:\Oracle\Ora81. What am I supposed to do at this point ? The installation guide is not explicit. Any help with these topics will be greatly appreciated.
I will be greatly obliged to anyone who can assist me with installing Forms & Reports 6i. Many thanks in advance.
Sincerely,
Partha Sur
[email protected]

Had the same problem too. It won't install in the same directory as your database. You need to create a new directory on your hard drive and have it installed there. Worked for me.
Regards,
LP

Problems installing Oracle Developer Suite 10g in windows 7

Hi Experts;
I have installed Oracle Developer Suite 10g in windows XP, but now I change to windows 7, 64 bits, I was trying to install this product and I'm having a lot of problems, apparently this product is not compatible with windows 7.
My question is, is there any product, like Oracle Developer Suite 10g for windows 7? I was looking for in the Oracle page, and I couldn't see anything, may be the name is diferent.
Thanks for your help.
Al

First off, Oracle Developer Suite (ODS) 10g is no longer supported so Oracle has discontinued improving the product. While ODS is not certified by Oracle for use on Windows 7 (32 or 64 bit), you can install and use on Windows 7 (32/64 bit). This is a commonly asked question so a search of the forum would have given you several solutions.
The limitations of the Oracle installer are:
1. You must have Administrator rights to install.
2. Windows 7 is not a supported version (it's version 6 and it is looking for version 5), so the installer exits.
3. It's unable to recognize Windows Managed virtual memory.
To get around these limitations you must do the following:
1. Modify your Virtual Memory settings and define a specific Min and Max amount. Look at this MS article if you need help making this change: http://windows.microsoft.com/en-us/windows7/change-the-size-of-virtual-memory
2. You must run the Oracle installer in compatibility mode for Windows XP. To do this,
- Right-click on the setup.exe and select the Compatibility tab and click "Run this program in compatibility mode for: Windows XP SP2"
3. While still in the properties and the compatibility tab, select the option, "Run as Administrator" and click OK.
Now run the Oracle setup.exe and your installation should succeed.
Craig...

I have a problem when installing the Developer Suite

Hello,
I'm new to Oracle and I'm having a problem when installing the Developer Suite 10g. I have the Oracle Database 11g installed, but when I try to istall the developer, it gives me this error: "Oracle Developer Suite 10g cannot be installed into an existing Oracle9i 9.2.0.1.0 oe higher Oracle Home", Although I have installed the same thing twice before and it was working.
Please help me with this :(

Hi user;
I'm new to Oracle and I'm having a problem when installing the Developer Suite 10g. I have the Oracle Database 11g installed, but when I try to istall the developer, it gives me this error: "Oracle Developer Suite 10g cannot be installed into an existing Oracle9i 9.2.0.1.0 oe higher Oracle Home", Although I have installed the same thing twice before and it was working.What is your OS? If you are linux-unix level you are making installation wiht same user of Oracle Db11g? Did you try to create new Oracle_home and set it before start installation?
Regard
Helios

Problem to connect Developer Suite forms 9 with Oracle 9i Database

Hi,
I have a problem to connect Developer Suite Release 2 forms 9 with Oracle 9i database release 1. I have done net8 easy configuration but no success. Can any one help me to solve this problem.
Thanks in Advance
Nasir Ali Mughal

We cannot help if you don't give us the error number that you get.
Also something that you might want to do is to search this error number on OTN.

Problem Connecting Developer Suite Form 9 with Oracle 9i Database

Hi,
I have a problem to connect Developer Suite Release 2 forms 9 with Oracle 9i database release 1. I have done net8 easy configuration but no success. The error is ORA-12514 TNS: Listener could not resolve SERVICE_NAME given in connect descriptor. I am not using any application server. Can any one help me to solve this problem.
Thanks in Advance
Nasir Ali Mughal

Configure the net configuration for both 9idb and 9ids in the same way. Make sure the TNSlisner is started.

Download Problem for Oracle9i Developer Suite Release 2

Hi,
I have been trying to download Oracle9i Developer Suite Release 2 from http://otn.oracle.com/software/products/ids/htdocs/winsoft.html
There are two zip files
1. A99230-01.zip (606,797,721 bytes)
2. A99231-01.zip (207,292,517 bytes)
I was able to download (2) completely and is able to extract files from the Zip format. But after trying 4-5 times downloading the (1) still I am unsuccessful.
After the files download reaches somewhere around 250,000,000 bytes it says the download is complete but when I try to open the Zip files, it says the Zip is invalid. Is there any problem with the Zip that is uploaded to this site. How can I solve this problem.
Is it possible for me to get the Free S/w on CDs like we used to get for forms 6i through OTN site? If so where should I register for the same?
thanks in Advance
Anil Krishnan

It seems that it is only possible to start download of two files at a time. If you try to start more, the system hangs up. If you are trying to download the version that is split in ten files, you have to do this one file at a time. If you are trying to download a single file, make sure that this is the ONLY download session that is running on your computer.
Yours sincerely
Niels Terp

Connectivity and Installation Problem in Developer suite 10g

Please help me solve this problem since I am beginner to Oracle 10g database and Developer suite 10g.
1. I have loaded successfully Oracle 10g database on my server with windows OS 2003 having IIS option selected and configured as my Domain server.
2. I have loaded Developer suite 10g complete in another PC with windows XP. I am able to connect to the database and also OC4J is started and Run form in test mode also works. Also I have developed some forms using developer suite and I am able to run the fmx runtime form in this computer.
3.Now my problem is I have a local LAN and at present there is no internet or web site for this company but they want to work in lan and all departments want to access the data from the server.(Later on when they get a website at that time they want to deploy the forms to the web)
4.Please tell me how and where I will store my fmx file. If I have to save it in the server then how will the clients access it.
5. How to install the developer 10g runtime only in client PC's (OS windows xp) since there is no option in the CD to select the installation like previous releases like D2k.
6. There is no middle tier in this case. Only One server as domain
and client pcs.
Please guide me,matter urgent.
Thanks in advance

Regarding this point -
1.
Then you should be able, for testing purposes, to do the same from other Clients.
Then I have to install developer suite 10g in client pc's but the runtime option selection is not available in the CD. How to proceed?
2.
For production environment, as already said, you should install some Application server. If you only need Forms and Reports you can install the standalone version Forms&Reports services, without infrastructure.
This means I have to install the standalone version Forms&Reports services in the same server where I have installed 10g database and this also being a domain server.
(We do not have sufficent computers where one can use it as application server). Hence only one server with OS windows 2003 and 5 computers with windows xp is available).
Please explain the steps to proceed .
thank you

Problem installing Oracle9i Developer Suite

When I try to install Oracle9i Developer Suite in my Windows ME system, the Universal Installer prompt me the following error message:
"Unable to setup inventory. You may not have proper permissions".
Does anyone know how to solve this problem.
I'm new to Oracle, sorry if this is a stupid question.
Thanks and regards
Ken

"Unable to setup inventory. You may not have proper permissions".
Yes, this error is infuriating.
In the case of a first-time installation of Oracle9i Database Release 2 Enterprise Edition on AIX 5.3, the answer was to -
1. Cancel the installation process.
2. On the server -
cd /etc
rm oraInst.loc oratab
3. Restart the installation process.
I don't know how applicable this solution is to Oracle9i Developer Suite, but would guess the problem is something similar.

Oracle forms developer suite problem

i have install oracle 9i database and 10g developer suite ,when i run forms then error displayed is
An unhandled win32 exception occured in iexplore.exe[4652],just in time debugging this exception failed with the following error,no installed debugger has just in time debugging enabled
Can anyone help me on this problem
if not possible then tell me the procedure to uninstall oracle developer suite 10g
smily
[email protected]

Hi,
Same Problem I am getting.
"An unhandled win32 exception occured in ifbld60.exe[1484]. Just-In-Time debugging this exception failed with following error: No installed debugger has Just-in_time debugging enabled. In Visual Studio....."
The problem scenario is like this:
1. I am using forms6i developer on windows XP-SP3 M/c, with 2GB RAM, P4 processor.
2. I am able to compile all forms except xxxx.fmb
3. I tried compling xxxx.fmb after clearing registry entries for xxxx.fmb(entries mainly made for explorer and i deleted.).
4. I also tried compling xxxx.fmb after reinstalling Forms6i Developer several times.(For Forms6i there no option for uninstall).
5. I also tried compling xxxx.fmb after installing Visual Studio.-- OutCome-- Just visual studio window opens and blank window comes.-- I felt this is of no use. and uninstalled Visual studio.
6.I copied the same form and tried in another PC, same problem.
7. After this problem, I cannot open Report Builder too.. :(
Please somebody help me...
This is very critical :(
Edited by: user10446916 on Apr 25, 2011 10:58 AM

Problem installing Oracle 9i developer suite

Hi Friends,
I have problem in installing Oracle 9i Developer suite downloaded from Oracle website. When I am installing I get this error
Unable to find product oracle.swd.jre[1.1.8.1.2] in Oracle inventory.
Later on I get this error
Error writing to file C:\oracle\product\bin\ociw32.dll
and another couple of such errors.
Can anyone guide me regarding this installation it would be of gr8 help.
Thanks a lot for your help.
Manju

Had the same problem too. It won't install in the same directory as your database. You need to create a new directory on your hard drive and have it installed there. Worked for me.
Regards,
LP

10.1.2.3 Developer Suite patch problem

Similar Messages

Maybe you are looking for