[10.1.2] Protected Mode causing 100% CPU Usage/Extra Processes on Win XP 32-bit?
Hello,
I'm not 100% sure if the two are related, but I have a client who was seeing 100% CPU usage using Adobe Acrobat Reader X 10.1.2 on Windows XP 32-bit and Firefox 11. The acrord32.exe process would hang around after closing the main window and eventually leading to tons of processes and his CPU at 100% use. I believe disabling Protected Mode may have solved this issue. I didn't see it documented anywhere so I figure I'd post about it here and see if anyone else was seeing this resolved as well.
I noticed 'only' 50 % CPU usage. Not during Reader usage with ~ 20 %, but it started after closing main window.
Two instances of acrord32.exe were created - the moment pdf was opened - of which one was using zero CPU.
After opening another pdf, 2 more processes were created, so 4 in total. Have seen 2 of them using 100 %.
Issue is easily recreated.
This is all in 10.1.3, no fix from Adobe, only THE fix from you: turning of Protected Mode!
After which now only one proces is created, with 1 to 3 pdf documents opened at same time.
This instance is then nicely shutdown after the last pfd is closed.
Similar Messages
-
Windows 2000 SP4, 1g RAM, Firefox 9.0.1
We keep IE6 and Firefox open simultaneously for 2 different mail accounts. Firefox was always much faster even with 3 or 4 tabs open, but for the past couple of weeks when trying to update a screen the CPU suddenly goes to 100% usage and of course nothing will move until the particular process is finished. Closing one or more tabs does not help. If I close Firefox completely with Task Manager CPU usage goes back down to nil. After restarting Firefox CPU usage may or may not go back up depending upon whether it tries to continue the previous task that was locking it up.
It did not do this with Firefox 3.6 but then again it didn't happen immediately after updating to 9.0.1 either.100% CPU usage occurred most often toward the end of the working day when busy trying to print on-line postage. We don't have any memory-consuming plugins but according to the knowledge base articles Firefox memory usage can gradually increase during the day even if you do nothing. It seems that may be the problem so we close and restart Firefox more often now as that usually fixes the problem. However, if we get stuck on a particular website update that causes the CPU to to go 100%, we can always start Firefox without previous tabs so the update will stop, or simply use a different browser until we have time to let the computer play games with itself.
So our workaround of restarting Firefox turns out to be the final solution (until we find something better - will post it if we do). Vic -
Copying from USB NTFS device with Dolphin (KDE) causes 100% CPU usage
I am copying +/- 30 GB of Music files (flac) from my external USB HDD which is formatted as NTFS.
I have installed ntfs-3g and am experiencing near 100% CPU usage. What's wrong?
Additional info: I am using KDE and initiated the copying through dolphin. KDE's system monitor only shows CPU usage near 100%, but no processes in the process view could be responsable.
Thanks!What mount options are used for that ntfs drive?
Edit: There are many similar threads but I couldn't find a solution other than trying out some kernel and cpufrequtils fun.
Last edited by karol (2011-01-16 18:12:15) -
Spreadsheet functions causing 100% CPU usage
Running ColdFusion Enterprise 9,0,0,251028 with JVM 1.6.0_14 on a Windows 2003 server. I am finding that when using <cfspreadsheet> and the spreadsheet functions to build a spreadsheet the server CPU maxes out at 100% while the spreadsheet object is being built. The spreadsheet is not overly large or complex: 10-15 columns and 400-500 rows. This behavior is consistent - it happens every time, even when building a simple spreadsheet with 1 column and a few rows. Is anyone else experiencing this? Is it a known problem with a fix? Thank you.
Michael Mongeau
Stratus TechnologiesI was able to root cause the excessive CPU usage to a single-CPU virtual machine. When I ran the same code on dual-CPU virtual machines the CPU usage went to 50-60% but never reached 100% and stayed there as it does on the single-CPU virtual machine. So there appears to be an issue with JRun and Apache POI on single-CPU machines. I simply had my system administrator add another CPU to the virtual machine and the problem no longer occurs.
-
Small Acrobat file causes 100% cpu usage with v. 7.09
Using Acrobat professional 7.09
I have a small acrobat file (94k) that causes my cpu to peg at 100% I used acrobat professional to convert an eps file to a pdf file. Is there a general known issue that could be causing this?
Stephen> Looking at the plot, you might want to consider trying to use a vector graphic in the future. It looks like a plot that you may have created in MATLAB or such. In that case, why not just print to the PDF.
I used matplotlib, which can generate png, eps, svg, or even pdf files. The pdf in question was converted by acrobat from eps, which has worked well for me in the past. I wish acrobat pro 7 could handle svg.
Stephen -
SQL query against ConfigMgr DB causing 100% cpu usage on SQL server throughout day
Hi, I am hoping someone here may have an idea of what I can do to resolve this as I am not much of a SQL guy. Here is what I know. Throughout the day, monday-friday, my ConfigMgr SQL server sits at 98-100% processor usage.
Using the following query I have narrowed down the culprit of the high cpu usage throughout the day:
SELECT p.spid, p.status, p.hostname, p.loginame, p.cpu, r.start_time, r.command,
p.program_name, text
FROM sys.dm_exec_requests AS r,
master.dbo.sysprocesses AS p
CROSS APPLY sys.dm_exec_sql_text(p.sql_handle)
WHERE p.status NOT IN ('sleeping', 'background')
AND r.session_id = p.spid
Even though my knowledge of SQL is light, I believe the following output clearly defines the thread responsible for the high cpu usage. This "program_name" is present throughout the day and as long as its there, cpu usage remains at or near 100%:
The text output of the above culprit is as follows (sorry this is long):
-- Name : spDrsSummarizeSendHistory
-- Definition : SqlObjs
-- Scope : CAS_OR_PRIMARY_OR_SECONDARY
-- Object : P
-- Dependencies : <Detect>
-- Description : Summarize DrsSendHistory information into DrsSendHistorySummary
CREATE PROCEDURE spDrsSummarizeSendHistory
AS
BEGIN
SET NOCOUNT ON;
DECLARE @CurrentTime DateTime;
DECLARE @SiteCode nvarchar(3);
DECLARE @LastSummarizationTime DateTime;
DECLARE @NextSummarizationTime DateTime;
DECLARE @Interval INT; -- summarize interval in minutes
DECLARE @ReplicationID INT
DECLARE @iMaxID INT
DECLARE @iCurrentID INT
DECLARE @iBatchSize INT = 50
DECLARE @ReplicationPattern NVARCHAR(255)
DECLARE @TargetSite NVARCHAR(3);
DECLARE @TimeTable TABLE (TargetSite NVARCHAR(3), StartTime DATETIME, EndTime DATETIME, PRIMARY KEY (TargetSite, StartTime, EndTime))
DECLARE @TargetSites TABLE (SiteCode NVARCHAR(3) PRIMARY KEY)
DECLARE @ChildTargetSites TABLE (TargetSite NVARCHAR(3), LastSummarizationTime DATETIME, [Interval] INT, PRIMARY KEY (TargetSite))
DECLARE @ReplicationGroup TABLE (ID INT, ReplicationPattern NVARCHAR(255))
IF OBJECT_ID(N'TempDB..#DrsSendHistorySummary') IS NOT NULL
DROP TABLE #DrsSendHistorySummary
CREATE TABLE #DrsSendHistorySummary (ID BIGINT IDENTITY(1, 1) NOT NULL, SourceSite NVARCHAR(3), TargetSite NVARCHAR(3), ReplicationGroupID INT, SyncDataSize BIGINT, CompressedSize BIGINT, UnCompressedSize BIGINT, MessageCount INT, ChangeCount INT, SummarizationTime DATETIME, PRIMARY KEY (ID))
SET @CurrentTime = GETUTCDATE();
SET @SiteCode = dbo.fnGetSiteCode();
INSERT INTO @ReplicationGroup (ID, ReplicationPattern)
SELECT RD.ID, RD.ReplicationPattern
FROM ReplicationData RD
WHILE EXISTS (SELECT * FROM @ReplicationGroup)
BEGIN
SELECT TOP (1) @ReplicationID = ID, @ReplicationPattern = ReplicationPattern FROM @ReplicationGroup
TRUNCATE TABLE #DrsSendHistorySummary
IF (((@ReplicationPattern = N'global' OR @ReplicationPattern=N'site') AND dbo.fnIsPrimary() = 1)
OR (@ReplicationPattern = N'global_proxy' AND dbo.fnIsSecondary() = 1))
BEGIN -- when current site is child
SET @LastSummarizationTime = ISNULL(( SELECT MAX(SummarizationTime) FROM DrsSendHistorySummary WHERE SourceSite = @SiteCode AND ReplicationGroupID = @ReplicationID),
(SELECT MIN(EndTime) FROM DrsSendHistory WHERE ReplicationGroupID = @ReplicationID) );
SET @Interval = ISNULL((SELECT VALUE FROM RCMSQLCONTROLPROPERTY SCP, RCMSQLCONTROL SC
WHERE SCP.ControlID = SC.ID AND SCP.Name = N'Send History Summarize Interval' AND SC.TypeID = 3 and SC.SiteNumber = dbo.fnGetSiteNumber()), 15); -- default 15 minutes
DELETE @TargetSites
INSERT INTO @TargetSites (SiteCode)
SELECT DISTINCT SiteCode FROM DRS_MessageActivity_Send WHERE ReplicationID = @ReplicationID
IF @LastSummarizationTime IS NOT NULL AND EXISTS (SELECT * FROM @TargetSites)
BEGIN
SET @NextSummarizationTime = DATEADD( minute, DATEDIFF(minute, 0, @LastSummarizationTime)/@Interval *@Interval + @Interval, 0);
-- Summarized according to interval
DELETE @TimeTable
WHILE (@CurrentTime >= @NextSummarizationTime )
BEGIN
INSERT INTO @TimeTable (TargetSite, StartTime, EndTime)
SELECT SiteCode, @LastSummarizationTime, @NextSummarizationTime FROM @TargetSites
SET @LastSummarizationTime = @NextSummarizationTime;
SET @NextSummarizationTime = DATEADD(mi, @Interval, @NextSummarizationTime );
END
INSERT INTO #DrsSendHistorySummary (SourceSite, TargetSite, ReplicationGroupID, SyncDataSize, CompressedSize, UnCompressedSize, MessageCount, ChangeCount, SummarizationTime)
SELECT @SiteCode, T.TargetSite, @ReplicationID, SUM(ISNULL(D.SyncDataSize, 0)), SUM(ISNULL(D.CompressedSize, 0)), SUM(ISNULL(D.UnCompressedSize, 0)), SUM(ISNULL(D.MessageCount, 0)), SUM(ISNULL(ChangeCount, 0)), T.EndTime
FROM DrsSendHistory D RIGHT JOIN @TimeTable T ON D.EndTime >= T.StartTime AND D.EndTime < T.EndTime AND ReplicationGroupID = @ReplicationID AND T.TargetSite = D.TargetSite
GROUP BY T.TargetSite, T.StartTime, T.EndTime;
END
END
ELSE IF ((@ReplicationPattern = N'global' AND dbo.fnIsCAS() = 1)
OR (@ReplicationPattern = N'global_proxy' AND dbo.fnIsPrimary() = 1))
BEGIN -- when current site is parent
DELETE @ChildTargetSites
INSERT INTO @ChildTargetSites(TargetSite, LastSummarizationTime, [Interval])
SELECT DISTINCT(DSH.SiteCode),
ISNULL(( SELECT MAX(SummarizationTime) FROM DrsSendHistorySummary WHERE SourceSite = @SiteCode AND ReplicationGroupID = @ReplicationID AND TargetSite=DSH.SiteCode),
(SELECT MIN(EndTime) FROM DrsSendHistory WHERE ReplicationGroupID = @ReplicationID) ) AS LastSummarizeTime,
ISNULL((SELECT VALUE FROM RCMSQLCONTROLPROPERTY SCP, RCMSQLCONTROL SC WHERE SCP.ControlID = SC.ID AND SCP.Name = N'Send History Summarize Interval' AND SC.TypeID = 3 and SC.SiteNumber = dbo.fnGetSiteNumberBySiteCode(DSH.SiteCode)), 15) AS Interval
FROM DRS_MessageActivity_Send DSH WHERE DSH.ReplicationID = @ReplicationID
GROUP BY DSH.SiteCode;
DELETE @TimeTable
WHILE EXISTS (SELECT * FROM @ChildTargetSites)
BEGIN
SELECT TOP (1) @TargetSite = TargetSite, @LastSummarizationTime = LastSummarizationTime, @Interval = Interval FROM @ChildTargetSites
SET @NextSummarizationTime = DATEADD( minute, DATEDIFF(minute, 0, @LastSummarizationTime)/@Interval *@Interval + @Interval, 0);
-- Summarized according to interval
WHILE (@CurrentTime >= @NextSummarizationTime )
BEGIN
INSERT INTO @TimeTable (TargetSite, StartTime, EndTime)
SELECT @TargetSite, @LastSummarizationTime, @NextSummarizationTime
SET @LastSummarizationTime = @NextSummarizationTime;
SET @NextSummarizationTime = DATEADD(mi, @Interval, @NextSummarizationTime );
END
DELETE @ChildTargetSites WHERE TargetSite = @TargetSite
END;
INSERT INTO #DrsSendHistorySummary (SourceSite, TargetSite, ReplicationGroupID, SyncDataSize, CompressedSize, UnCompressedSize, MessageCount, ChangeCount, SummarizationTime)
SELECT @SiteCode, T.TargetSite, @ReplicationID, SUM(ISNULL(D.SyncDataSize, 0)), SUM(ISNULL(D.CompressedSize, 0)), SUM(ISNULL(D.UnCompressedSize, 0)), SUM(ISNULL(D.MessageCount, 0)), SUM(ISNULL(D.ChangeCount, 0)), @NextSummarizationTime
FROM DrsSendHistory D RIGHT JOIN @TimeTable T ON D.EndTime >= T.StartTime AND D.EndTime < T.EndTime AND ReplicationGroupID = @ReplicationID AND T.TargetSite = D.TargetSite
GROUP BY T.TargetSite, T.StartTime, T.EndTime;
END;
SELECT @iMaxID = MAX(ID), @iCurrentID = 0 FROM #DrsSendHistorySummary
-- BATCH INSERT TO REAL TABLE
WHILE (@iCurrentID < @iMaxID)
BEGIN
INSERT INTO DrsSendHistorySummary (SourceSite, TargetSite, ReplicationGroupID, SyncDataSize, MessageCount, ChangeCount, SummarizationTime)
SELECT SourceSite, TargetSite, ReplicationGroupID, SyncDataSize, MessageCount, ChangeCount, SummarizationTime
FROM #DrsSendHistorySummary WHERE ID > @iCurrentID AND ID <= (@iCurrentID + @iBatchSize)
SET @iCurrentID = @iCurrentID + @iBatchSize
END
TRUNCATE TABLE #DrsSendHistorySummary
DELETE @ReplicationGroup WHERE ID = @ReplicationID
END
END
If anyone has any experience with this issue or anything similar and might be able to point me in the right direction, any responses would be greatly appreciated. Thanks for reading!Normally, this summary job every few mins which only summarize last few mins sending history. If the job was not running for long time, the first time, this sproc will summarize a lot more data than normal. So it could fail which will make things worse and
worse over time.
If sending summary data is not a big concern here, you can manually insert a dummy row with most recent time as Summarizationtime, so that, when summary job kicks in next time, it will only summary short interval data.
DrsSendHistory is that the table records every sending on every group. This table is one of the key of replication logic. For your environment, on primary site, it could have up to 24(hrs) * 60 (mins) / 2 (sync interval) * 36(secondary sites) records per
day for Secondary_Site_Replication_Configuration group and 24 * 60 / 5 * 22 records for Secondary Site Data.
Umair Khan | http://blogs.technet.com/umairkhan
Hi Umair,
Thank you for the reply. My plan was to go ahead with your suggestions but what I tried first was to get my VM guy to give the SQL server access to more CPU resources. We had already configured it with what would have seemed to be plenty, as per Microsoft's
sizing requirements, but I figured it couldn't hurt to rule out - he gave the SQL server access to a huge portion of the host processing power and since then CPU usage on the server has NOT been an issue.
It would appear that the large amounts of secondary sites we have just simply put a lot of stress on the SQL server with out of the box replication settings. Since the entire VM host is for System Center only, and our other System Center servers are using
very little resources, this solution has ended up being valid.
Thanks again for everyone's help with this. -
Large-scale swf causes 100% CPU usage
Hi,
I've created an interactive map that loads data from XML. The
map is made from several areas (MCs, currently 16) - all positioned
in a "mega MC" that holds the map together. The JPG are loaded
externally respectively to the area MC that it belongs to.
The problem is that the Map MC (that contains all the area
MCs) is too big (around 6000X6000 Pxs) and therefore slows down the
computer significantly (The CPU reaches 100% usage). This happens
also when there's no loading of the external JPGs - meaning, I
think, that the problem is only with the "physical" size of the MC
and not its actual MB size.
I hope I was clear enough.. Would appreciate any help!
Link to mapHi,
I had a similar problem when I needed a really big area. I
think the cpu usage wasn't that bad in Flash Player 7 and 8.5 (now
9), but in Flash 8 it was really high. I decided to not move the
big MC around, only the smaller parts that where needed. I guess
the whole map is never shown completely, only parts of it, so you
can write a scroll function that determines the active MCs and only
moves those around instead of the big holder MC. To achieve this, I
added a variable to each MC that holds the position of that part in
the big MC. Then I kept track of the position of the display in the
map, and used this to decide which parts are actually displayed.
Only these MCs have to be moved when scrolling, reducing the cpu
usage a lot. When a part moves out of the display, I set its real
position to -5000, and when a new part comes into display, its
position is set from -5000 to the proper _x value so it gets
displayed.
hth,
blemmo -
Tab selection property causing 100% CPU usage
Hi,
I've having some trouble with using property nodes to tab selection. After 1-2 hours the CPU usage is 100%. The VI is attached. I'm using LV 6.0.2 on win2000. Does anyone have a clue of what's happening?
Attachments:
tab_selector_property.vi 22 KBEvery time the while loop executes, you open *new* pages reference array. Whitout closing them, you quickly fill the memory and hog the computer usage. As in the modified VI attached, get the references only once outside the while loop and reuse them. Close any reference after use. As much as possible, you shoud use the control terminal to read its value instead of reading the value property.
LabVIEW, C'est LabVIEW
Attachments:
tab_selector_property.vi 25 KB -
I upgrade to iTunes 10.4.0.80. Since then iTunes uses 50% of the CPU and Mobile uses 50% CPU. I let it run for hours and the CPU usage stayed at 100%. The phone will partially sync but takes a very long time. This was not a problem before the iTunes upgrade. I am running iTunes on Windows XP professional SP3. It does not matter if the phone is connected to the USB port of the PC. When iTunes starts it runs the CPU at 100%.
Yes! I am not the only one with this problem. Ever since the latest iTunes update, the CPU runs up to 100% using both the mobiledevice and itunes itself. The store won't work either! I'm also on Windows XP. I too have tried everything I can think of but nothing has helped. I really hope they get an update out with fixes soon. This is really annoying!!
-
Why Xcode 4 causes 100% cpu usage?
Dear all,
I have been annoyed by the high cpu usage of Xcode 4.0.2 when editing code. It is burning my MacBook! I think this may be related to the dynamic code checking. Any idea?
Cheers,
Lidynamic checking?
Do you mean Instruments...?
AFAIK, it's always hungry, hungry hippo - the best defense right now is to use Xcode 3.2.6.
Xcode 4 isn't 'required' just yet, but it might happen later in the year with the next OS, which may help tame it a bit. -
Active JMenu causes 100% CPU usage.
Hi,
I have an Application with a JMenuBar on it.
Whenever I select one of my JMenu's my CPU
gets 100% usage while the Menu is expanded.
If I Alt+Tab away from the the Window the
CPU stays at 100%.
Has anyone else come across this ?
Cheers,
RoI have the same problem with a similar setup:
XServe G4 DP
OSXS 10.4.6
Also queried by a Solarwinds Orion NPM server (latest version). It seems that as long as I don't poll the storage MIBs everything is OK. Once I poll for storage the CPU on the XServe immediately spikes to 90-100% usage.
Anyway, disabling the polling of the XServe's storage on the Orion NPM seems the only work around I've found.
Xserve's, G5's, G4's, G3's... -
Configurator panels cause 100% CPU usage bug
I'm not sure where to file a bug report, so I am posting this here for now. Has any one else noticed this? (See attached video)
I just tried copying and pasting the script from the "Basic Attributes" section of Configurator:
ErrStrs = {}; ErrStrs.USER_CANCELLED=localize("$$$/ScriptingSupport/Error/UserCancelled=User cancelled the operation"); try {var idCrvs = charIDToTypeID( "Crvs" ); executeAction( idCrvs, undefined, DialogModes.ALL );} catch(e){if (e.toString().indexOf(ErrStrs.USER_CANCELLED)!=-1) {;} else{alert(localize("$$$/ScriptingSupport/Error/CommandNotAvailable=The command is currently not available"));}}
and ran it in the Extend Script Tool kit, and NO cpu over usage. So its not the command it self.
My specs;
Macbook Pro 2011
Osx 10.6.7
Photoshop 5 12.0.4
Configurator 2.0 -
Power cord causing 100% CPU usage on HP Pavilion dm4t
Bumping this topic because the problem seems to still be puzzling the HP engineers. I'm using a 2011 HP Pavilion dm4t and the problem has occurred numerous times and seemingly at random with any power outlet I use. Almost desperate for a solution. Almost.
Task Manager only shows Google Chrome, SVCHost, MsMpEng, and itself as the heavy users (>20% each). Task Manager should not even be using more than 1% CPU as it's meant to be a minimum influence observer process.Symptoms for all HP 3 wires AC power unit: Works awfully slowly, even unusable on AC but works fine on battery. Battery does not charge or very slowly (25% after one night) on AC.
This is the solution:
First check the power plug, outside is the ground, 0V, innerside on the edge + 19V and on the middle pin + 5.75V (This last I read on a forum) but personnaly I had 19V on the middle pin and my Compaq 8510w slowed awfully down on AC.
Whatever you have on the plug it means that the wiring is ok. Unplug the power unit and cut the wire (not too close to the plug). This cable is coaxial, on the first coat is the ground, the second the +19V and the tiny blue one on the center (Feedback?) is the one supposed to have +6V more or less. From the PU side check for the +19V and cut the blue one you won’t need it anymore.
Connect this two wires to the wires’ plug (+ and +, - and -). Between 0V and +19V make a bridge with 2 resistors in serial: 820 Ohms from +19V side and 330 Ohms to ground (Tested with 10K+4K7 but no way). Connect plug’s blue wire to the middle (+6V, but sometimes raises over 7V) of that bridge and that’s it. Be aware that your cable could be broken inside, generally nearby the plug. Could also be a problem with the power jack.
Now you got the keys to make your own Power Unit using an universal AC power or car adapter. -
100% CPU Usage caused by HMI
Hi everybody:
I'm working with LabVIEW DSC 8.2.1 in a system that monitors many variables of a plant, such a typical SCADA system. For this reason, the use of the graphic tools is highly used on the development of this system. Everything works fine, but I have only one problem.... the usage of the CPU.
When I am working on the development system I (not the executable) I start the application and after the variables are initialized and every process has started and are running , the CPU usage is raised around 90 - 100%. After a few days investigating the reason of this, I realized thay when I change the view on the screen to another view, for example the block diagram of the application, while the application is still running, the CPU usage goes around 15 - 25%. I've tried these many times changing the view from Front panel to Block Diagram and viceversa and the result is always the same: Front Panel= around 100%; Block diagram or another view (other applications MMIs, or Block Diagrams, etc.)= around 20%.
Another thing that I realized is that the other view (different to front panel) has to fill the entire screen to work the way I'm telling before.
When I build and run the executable, the usage of the CPU is the same... (around 100%), but I can't see any other application, because the application built is the shell of the OS, so no other views are available.
I don't know if there's some other consideration to take into account about the HMI when creating an application, and I'll appreciate very much your help.
Thanks in advance!
Ignacio von UngerFrom http://100cpuusage.blogspot.com/
100 Percent CPU Usage when you run programs after you install Windows XP Service Pack 2
CPU Usage 100% Symptoms
When you run some programs, the CPU Usage meter in Task Manager may indicate CPU Usage 100%. When CPU utilization reaches 100 percent, programs will run very slowly or stop responding (hang) and your computer is freezing or crashing.
Noteress CTRL+ALT+DEL to view CPU utilization, click Task Manager, and then click the Performance tab.
These symptoms occur after you install Microsoft Windows XP Service Pack 2 (SP2).
CPU Usage 100% Cause
These problem occurs because of the user interface code that is included in Windows XP SP2. The high CPU utilization is caused by the additional overhead that occurs when the IsWindow function is called by the user interface code.
RESOLUTION
Hotfix information
A supported hotfix is now available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing this specific problem. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next service pack that contains this hotfix.
To resolve this problem, submit a request to Microsoft Online Customer Services to obtain the hotfix. To submit an online request to obtain the hotfix, visit the following Microsoft Web site:
http://go.microsoft.com/?linkid=6294451
Note If additional issues occur or any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. To create a separate service request, visit the following Microsoft Web site:
http://support.microsoft.com/contactus/?ws=support (http://support.microsoft.com/contactus/?ws=support)
Prerequisites
To apply this hotfix, you must have Windows XP SP2 installed.
Restart requirement
You must restart the computer after you apply this hotfix.
Hotfix replacement information
This hotfix does not replace any other hotfixes.
File information
The English version of this hotfix has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel. Date Time Version Size File name
30-Mar-2005 19:53 5.1.2600.2643 577,024 User32.dll
30-Mar-2005 01:30 5.1.2600.2643 1,836,544 Win32k.sys
if you still do not know how to Fix CPU Usage 100%?
I suggest you try targeted software - registry cleaner to fix cpu usage 100%
Because there are many cases causing high cpu utilization.
1. If you do a lot of web surfing and are concerned about spyware, adware infecting your machine, they will cause system crashes and CPU utilization reaches 100 percent. Some good registry cleaner has the function of spyware & adware removal.
2. You install many beta version of the software, Drivers are not certified, which resulted in many errors, you get high cpu usage.
3.100% CPU Usage while you use Internet Explorer
4. many unneed Startup Program.
5.Others PC Errors. - DLL errors, runtime errors, Windows-Installer Errors, Windows Startup Errors,paths Broken DLLs, OCX, and ActiveX Components all will cause 100% cpu usage. Your PC will run very slowly.
Registry cleaner can do a complete scan of your entire file system and registry in under 2 minutes! Fix High Cpu Usage. Improve PC Speed By Up to 70%!
http://www.100-cpu-usage.com/ suggest you to download registry cleaner to fix 100% cpu usage too.
PCErrorsfixer.com - Top 3 Windows Registry Cleaners, Improve PC Performance,5 Star Rated. Fix 100% CPU Usage, Runtime Error, DLL Error,Windows Startup Errors,Internet Explorer Errors, Speed Up your slow PC. -
Some web pages causing 100% CPU use of iexplore.exe since Flash update
I'm having a problem with certain Amazon.com pages hanging my
Internet Explorer 6 using Flash Player 10,0,12,36, causing 100% CPU
use for iexplore.exe and requiring me to End Task to quit. All the
pages effected have an interactive mouseover Size and Color chart
that intially says "Loading" but then says "Select Size and Color"
once loaded. One mouseovers the various color patches and size
options, each time giving item availability in that option. When
the pages hang the IE browser with 100% CPU use that chart never
gets to the "Select Size and Color" point, instead stuck at the
"Loading" status. This happens most times, but not every time.
Sometimes the pages load correctly, after a brief lag as it loads
the chart.
Amazon pages without this chart load fine.
The start of this problem coincides with updating Flash.
I can prevent the problem from happening almost every time if
I can quickly get my cursor into that chart area while the page
begins loading. If I allow the pages to load fully with no
interaction they will hang almost every time.
I have not noticed any problems on those same web pages using
Firefox using Flash Player 9,0,124,0
I also have not noticed any issues with other sites using
Internet Explorer either. (YouTube, QVC, CNN...etc, all OK.)
I had posted for assistance on the Experts Exchange site and
there was some debate on whether the chart was a Java or
Flash-based chart, so initially it was being approached as a
possible Java issue, so I removed all Java versions on the system
and installed various versions, but the same problem persists.
I've downloaded but not run the Flash Uninstaller, as I'm
reluctant to uninstall the Firefox Flash version without knowing
for sure I could install 9,0,124,0 again.
I've downloaded an archived fp9_archive.zip, which seems to
indicate the contained files flashplayer9r124_winax.exe (Internet
Explorer) and flashplayer9r124_win.exe (Netscape) would be versions
9,0,124,0 to install after running the uninstaller.
Can anyone check a few of the links below and see if the
"Select Size and Color" chart is Flash based? If so, would
executing the files listed above install 9,0,124,0 into my
respective browsers again?
http://www.amazon.com/FCS-Regular-7mm-Surf-Leash/dp/B00149XJ68
http://www.amazon.com/Womens-Classic-Short-UGG-Boots/dp/B00064NH8W/ref=pd_ecc_rvi_cart_3
http://www.amazon.com/Columbia-Sportswear-Womens-Benton-Springs/dp/B0006M6IQ2/ref=pd_ecc_r vi_cart_2
http://www.amazon.com/Ladies-Chenille-Zip-Cardigan-Sweater/dp/B001E0YJ0C/ref=pd_ecc_rvi_ca rt_4
XP IE 6 (error module : MSHTML.DLL)
Flash Player version 10,0,12,36
Firefox
Flash Player version 9,0,124,0
Thank you-
VickieI'm attempting to troubleshoot an issue with Amazon web pages
since I've updated my Flash player. I would appreciate if someone
could take a look at my initial post and advise if the issue seems
to be Flash related.
Thank you.
I'm having a problem with certain Amazon.com pages hanging my
Internet Explorer 6 using Flash Player 10,0,12,36, causing 100% CPU
use for iexplore.exe and requiring me to End Task to quit. All the
pages effected have an interactive mouseover Size and Color chart
that intially says "Loading" but then says "Select Size and Color"
once loaded. One mouseovers the various color patches and size
options, each time giving item availability in that option. When
the pages hang the IE browser with 100% CPU use that chart never
gets to the "Select Size and Color" point, instead stuck at the
"Loading" status. This happens most times, but not every time.
Sometimes the pages load correctly, after a brief lag as it loads
the chart.
Amazon pages without this chart load fine.
The start of this problem coincides with updating Flash.
I can prevent the problem from happening almost every time if
I can quickly get my cursor into that chart area while the page
begins loading. If I allow the pages to load fully with no
interaction they will hang almost every time.
I have not noticed any problems on those same web pages using
Firefox using Flash Player 9,0,124,0
I also have not noticed any issues with other sites using
Internet Explorer either. (YouTube, QVC, CNN...etc, all OK.)
I had posted for assistance on the Experts Exchange site and
there was some debate on whether the chart was a Java or
Flash-based chart, so initially it was being approached as a
possible Java issue, so I removed all Java versions on the system
and installed various versions, but the same problem persists.
I've downloaded but not run the Flash Uninstaller, as I'm
reluctant to uninstall the Firefox Flash version without knowing
for sure I could install 9,0,124,0 again.
I've downloaded an archived fp9_archive.zip, which seems to
indicate the contained files flashplayer9r124_winax.exe (Internet
Explorer) and flashplayer9r124_win.exe (Netscape) would be versions
9,0,124,0 to install after running the uninstaller.
Can anyone check a few of the links below and see if the
"Select Size and Color" chart is Flash based? If so, would
executing the files listed above install 9,0,124,0 into my
respective browsers again?
http://www.amazon.com/FCS-Regular-7mm-Surf-Leash/dp/B00149XJ68
http://www.amazon.com/Womens-Classic-Short-UGG-Boots/dp/B00064NH8W/ref=pd_ecc_rvi_cart_3
http://www.amazon.com/Columbia-Sportswear-Womens-Benton-Springs/dp/B0006M6IQ2/ref=pd_ecc_r vi_cart_2
http://www.amazon.com/Ladies-Chenille-Zip-Cardigan-Sweater/dp/B001E0YJ0C/ref=pd_ecc_rvi_ca rt_4
XP IE 6 (error module : MSHTML.DLL)
Flash Player version 10,0,12,36
Firefox
Flash Player version 9,0,124,0
Maybe you are looking for
-
Any ideas on how to make program simpler?
This program is designed to send multiple TTL pulses to different instruments, while at the same time receiving and analyzing analog input data. We will likely be sampling at fairly low rates (rarely over 100 Hz). We will be getting a new USB board
-
Disk Utility and fsck report 'missing thread records' and can't repair.
Hello, What first made me realise there was a problem with my iMac was that when I tried to update a application it failed. I then manually download the .dmg of the update and tried replaced the app (Transmission 1.82 being that app in question). Thi
-
Oracle 8.0.5 on RedHat 6
I can't connect to oracle if I don't use linux oracle account. If I start sqlplus as oracle and connect as any db user everything seems to work fine. All env. var. should be ok! I am using oracles static linked executables on Red Hat 6 Any ideas??? /
-
Hi. I have inherited a client's mission critical database + SSRS project that I am attempting to migrate from 32-bit SQL Server Express 2005 + SSRS on a Windows Server 2003 to 64-bit SQL Server Express 2008 R2 + SSRS on a Server 2012 R2 Essentials. W
-
Please send me a pointer to a download site. Thanks in advance.