10.1.3 Cluster setup on Linux

Hi there,
Can someone successfully setup Oracle 10.1.3 cluster on Linux? Unlike 10.1.2, this release don't have Infrastructure and Metadata Repository installtion type. I just wonder if this release provides us to setup a cluster enviornment.
Thanks,
Kevin

Kevin,
I have got the same problem in RHEL 3 updater 4 with two host x86.
I have tried unsuccessfully to setup a topology active-active with dinamic discover with runInstaller. First midle-tier with administration console and second deselecting administration. All finished fine but when I executed opmnclt @cluster status only show one instance in every host.
I have also tried to configure the same topology after setup. I installed two integrated webserver, J2EE and opmn in every host and then I executed opmnassociate.sh. This neither worked.
With static discover it neither worked.
I have also checked software requeriments for RHEL 3 OS.
Thanks,
Juan

Similar Messages

  • Network Extender & Cluster Setup

    Does the Ingress unit satisfy the GPS signal requirements for other non-Ingress units in a cluster setup?
    We have a large steel warehouse that has no cell coverage in the building. I can provide coverage with 3 Network Extenders. However, my problem is going to be the GPS antenna's. I have 1 window that provides a good GPS signal for the 1 extender I have now. If I purchase 2 additional extenders to complete the AoC will each of them have to lock on to GPS too? Or do the non-ingress units not require GPS. It may be wishful thinking, but our only other option is to cut a hole to access the outside & I really dont think these antenna' can handle the environment.
    All units will be on the same network switch.

    Ah. And I am guessing (really just confirming) that Open Directory is one piece of functionality which is in OSX Server, but not in the basic Snow Leopard distribution.
    Sooo, is it worth digging around to see if any of the linux distributions out there contain Open Directory? I have an old lime (333 MHz) iMac in the basement...

  • OSB cluster setup with SSL

    Hi,
    Could any one help me here..
    Cluster setup for OSB with SSL enable
    1) Admin and 2 Managed server are running on same host
    2) cluster domain created in development mode
    2) While starting second managed server getting below error..
    <Oct 4, 2010 8:04:58 AM PDT> <Error> <ClusterTimer> <BEA-000000> <Cannot contact Admin server. Therefore constructing the Cluster Authority Current time with
    the time skew 0
    java.rmi.RemoteException: ClusterTimerAuthority error; nested exception is:
    javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3s://hostname:SSLport: Destination unreachable; nest
    ed exception is:
            java.io.IOException: Stream closed.; No available router to destination]
    at com.bea.wli.sb.init.RemoteClusterTimerAuthority.getClusterTimerAuthorityCurrentTime(RemoteClusterTimerAuthority.java:38)
    at com.bea.wli.timer.ClusterTimerService.clusterTimeAuthorityCurrentTimeMillis(ClusterTimerService.java:177)
    at com.bea.wli.timer.ClusterTimerService.initialize(ClusterTimerService.java:88)
    at com.bea.wli.sb.init.FrameworkStarter._preStart(FrameworkStarter.java:221)
    at com.bea.wli.sb.init.FrameworkStarter.access$000(FrameworkStarter.java:79)
    Truncated. see log file for complete stacktrace
    Thanks,
    Sushma.

    Even I faced the same issue..but eventually the problem got resolved with below resolution:
    Resolution: The managed server was not able to connect to t3s://hostname:sslport. The SSL configuration on Adminserver was wrong. After correcting SSL setting on Adminserver..i was able to resolve this error.

  • Verify HA Cluster setup in Oracle Virtual machine thru GUI

    Hi All,
    I have setup 3 node cluster with HA[Oracle VM] enabled.When i checked in the GUI it
    shows "High availability Infrastructure works well" like that.
    For testing HA, I poweroff one of the Oracle Virtual server node from the Oracle Virtual manager browser.
    Then if i checked the "Server Pools > Edit Server Pool ".check for "High Availability Infrastructure" browser keep going.
    Also one more thing is the Powered off machine automatically after some time it is coming up.Is
    it right ?
    After powered off if i run the below command in ovmmgr it shows 2 nodes are up.Same o/p
    how can i get in GUI when i clicked High Availability Infrastructure in "Server Pools > Edit Server Pool "
    [root@xxxovmsr1 ~]# /usr/lib/ovs/ovs-cluster-check master alter-fstab
    O2CB cluster ocfs2 already online
    2
    Cluster setup complete.
    Link hangs quit sometime.Not allowing new connections also ..What to do ?
    Basic question
    How to verify the cluster setup from the GUI when i click "High Availability Infrastructure" check button?
    Some one can help me in this please ?
    Regards,
    JK
    Edited by: user2861234 on Jun 29, 2009 8:11 AM

    Hey,
    After powered off one of VM server if i run the below command in ovmmgr it shows 2 nodes are up.
    Why are you going ovmmgr ?
    Are your checking it only thru gui part of the manager or also thru thr command line.
    Oracle vm server - are hosts for your virtual systems your create on them.
    If you power off the server - from GUI part you can see - it as switched off or unreachable
    If your HA feature is enabled for that pool having more than 1 server sharing the /OVS filesystem - then he virtual system which is runnign on 1 of the Oracle VM server - will not die
    It will migrate to other available server in the pool - which is whole idea and purpose of HA
    I don't understand what exactly you are trying to crosscheck or verify here with these commands
    High Availability Infrastructure in "Server Pools > Edit Server Pool "
    root@xxxoxxxr1 ~# /usr/lib/ovs/ovs-cluster-check master alter-fstab
    O2CB cluster ocfs2 already online
    2
    Cluster setup complete.
    If you have to check whether your HA feature is working - form GUI you can got o server pool - tab -
    edit it
    and chk the HA - tab
    and verify-
    it HA feature is working properly - it will give you message accordingly.

  • Why do we use reverse proxy for Oracle RAC Cluster setup

    Hello All,
                 I got this question lately.. "why do we use reverse proxy for Oracle RAC Cluster setup". I know we use the reverse proxy at Middleware level for multiple security reasons.
    Thanks..

    "why do we use reverse proxy for Oracle RAC Cluster setup".
    I wouldn't. I wouldn't use a proxy of any sort for the Cluster Interconnect for sure.
    Cheers,
    Brian

  • BAM Cluster setup - issue with whole server migration configuration

    HI,
    We are working on a SOA , BAM , BPM Cluster setup on OEL VMs
    With Admin server running on Host1 and Soa_server1, BAM_server1 , Host2 - Soa_server2 , Bam_server2.
    We were successfully able to setup clustering for Soa without using the webTier utilities in our environment, Just by adding entries in the /etc/hosts file.
    Followed the document - except for web tier setup
    http://www.namredlek.nl/orasoa/InstallSOASuite11gOnCluster_v1.pdf
    1)     Installed Weblogic 11g.
    2)     Soa 11g.
    3)     Domain creation
    4) Configured Node manager
    5) Soa Clustering completed successfully.
    6) Domain up and running with SOA_Cluster up and running.
    7)     Extended the domain with BAM
    The issue revolves when we are doing teh Migration configurations from the console for BAM and we restart BAM server we get an error -
    Apr 14, 2011 2:30:35 AM weblogic.nodemanager.server.Handler handleStart
    WARNING: Exception while starting server 'bam_server1'
    java.io.IOException: Command '/oracle/Shared_MWHome/user_projects/domains/SOA_Domain/bin/server_migration/wlsifconfig.sh -addif eth0 192.168.1.6 255.255.255.0 ' returned an unsuccessful exit code '1'. Check NM logs for script output.
    and Bam server goes to Failed Not Restartable state.

    The error is clearly out there
    java.io.IOException: Command '/oracle/Shared_MWHome/user_projects/domains/SOA_Domain/bin/server_migration/wlsifconfig.sh -addif eth0 192.168.1.6 255.255.255.0 ' returned an unsuccessful exit code '1'. Check NM logs for script output.
    This error occurs due to a failure in adding the virtual IP of BAM server to the network interface you have specified in nodemanager.properties.
    You need to check whether you have specified the correct interface and subnet mask in node manager.properties as below :
    The fourth step is to edit the Node Manager's properties file. This file is called nodemanager.properties
    and is located in the ORACLE_BASE/product/osbmw/wlserver_10.3/common/nodemanager directory.
    For server migration to work properly, you need to add the properties listed below:
    Interface=eth0
    NetMask=255.255.255.0
    UseMACBroadcast=true
    · Interface
    This property specifies the interface name for the floating IP (for example, eth0).
    · NetMask
    This property specifies the net mask for the interface for the floating IP. The net mask should the
    same as the net mask on the interface; 255.255.255.0 is used as an example in this document.
    · UseMACBroadcast
    This property specifies whether or not to use a node's MAC address when sending ARP packets,
    that is, whether or not to use the -b flag in the arping command.

  • SOAP ports with cluster setup and BES?

    Okay, our cluster setup in NetWare (yes, still NetWare cluster) with Groupwise 7.0.3 we have unique TCP ports for the client/server (like 1677-something). Even though each clustered node has a unique IP and is running in protected memory.
    That being said:
    We'd like to enable SOAP for use with BES and GWArchive.
    The issue/question:
    Do either of these figure out the SOAP port for each PO? Or must the SOAP port be the same among all the PO's for BES to work properly?
    If the SOAP port must be the same (I'm not the BES admin, so I don't know if the setup lets you specify just one port or if you can defined them per PO), can you run multiple POA on the same physical host (keep in mind, this is clustered with protected memory) and use the same TCP port # for SOAP?

    kjhurni wrote:
    > Okay, our cluster setup in NetWare (yes, still NetWare cluster) with
    > Groupwise 7.0.3 we have unique TCP ports for the client/server (like
    > 1677-something). Even though each clustered node has a unique IP and is
    > running in protected memory.
    >
    > That being said:
    >
    > We'd like to enable SOAP for use with BES and GWArchive.
    >
    > The issue/question:
    >
    > Do either of these figure out the SOAP port for each PO? Or must the
    > SOAP port be the same among all the PO's for BES to work properly?
    >
    > If the SOAP port must be the same (I'm not the BES admin, so I don't
    > know if the setup lets you specify just one port or if you can defined
    > them per PO), can you run multiple POA on the same physical host (keep
    > in mind, this is clustered with protected memory) and use the same TCP
    > port # for SOAP?
    >
    >
    I haven't used BES, but in general there's no auto-discover method for
    SOAP ports, so yes they'd probably have to be the same port.

  • Is there a specific differences doing obiee 11g setup on Linux Vs Windows?

    Hi,
    I did setup obiee 11.1.1.6 on windows 7 64 bit and upgraded RPD and webcat. now I need to do it on Linux environment. Is there a specific differences doing setup on Linux? do I need to update host file and configure loopback adapter in Linuc as well? please provide detail differences or settings I need to follow.
    appreciate for your help.
    Thanks
    Jay.

    I dont think any specific for Linux.
    Make sure you take care these in profile file
    ORACLE_HOME
    TNS_ADMIN
    PATH
    LD_LIBRARY_PATH
    Pls mark correct or helpful if helps

  • How to Uninstall SQL instance on active-passive SQL server , which failed during Cluster Setup (Error-Failed at Validate Active Directory Configuration)

    How to Uninstall SQL instance on active-passive SQL server , which failed during Cluster Setup (Error-Failed at Validate Active Directory Configuration)
    active-passive SQL server cluster setup failed due to some steps missed in initial cluster setup,
    now i have unistall sql instance from nodes,
    Your help will higly appriciated.
    Regards,
    Anish
    Asandeen

    Hello,
    Please refer to the following link about remove a node of  SQL Server Failover Cluster Instance:
    http://msdn.microsoft.com/en-us/library/ms191545.aspx#Remove
    Regards,
    Fanny Liu
    Fanny Liu
    TechNet Community Support

  • Display logfiles in cluster setup (HTTPS UI)

    Hi all
    In my standalone setup, I can display and download logfiles in HTTPS-Webgui under "Log Subscriptions" -> "Log Files".
    But in a cluster setup, I can't see the column "Log Files" under "Log Subscriptions". How can I access the files?
    Thanks!
    Christoph

    Hello Christoph,
    viewing individual logfiles on the GUI is notavailable for appliances in a cluster. You can still access them via your browser by using:
    ftp://appliancename.local
    as URL, where "appliancename.local" is the hostname or IP.  This will prompt you for an username and password, you can use your normal admin credentials. Also possible:
    ftp://[email protected]
    ftp://admin:[email protected]
    If you want to include username (and password)
    Hope that helps,
    Andreas

  • Weblogic cluster setup

    How can I setup two machines in cluster?
    What all I need to setup and whats the procedure.

    http://e-docs.bea.com/wls/docs70/pdf/cluster.pdf
    http://e-docs.bea.com/wls/docs70/cluster/setup.html

  • Oracle cluster setup

    Hi There,
    We're trying to build a clustered oracle environment using oracle 11g (11.2.0.1) under Windows 2008 server.
    The basic setup is to have 2 servers (active/passive), one shared SAN disk, install the software on both servers, put the database datafiles on the shared disk/SAN and when needed we can switch the shared disk between the 2 servers as failover/failback.
    IS the above industry standard cluster setup? or is there a better way of doing it? does oracle/windows provide a way to failover/failback between servers?
    Are there any documents that we can read that explains a good cluster setup please (without using RAC)? Or is there a document that have a better setup?
    Can someone shed some light on this please and/or point us to the right direction.
    Thanks

    Does oracle clusterware comes shipped with the specific release (10g, 11g..etc) database installation pack or is it a separate download?
    We saw this under the oracle download section:
    Oracle Database 11g Release 2 Grid Infrastructure (11.2.0.1.0) for Microsoft Windows (x64)
           Download      win64_11gR2_grid.zip (715,166,425 bytes) (cksum - 3127109177)
    Contains the Grid Infrastructure Software including Oracle Clusterware, Automated Storage Management (ASM), and ASM Cluster File System. Download and install prior to installing Oracle Real Application Clusters, Oracle Real Application Clusters One Node, or other Oracle software in a Grid Environment So, I was wondering if we should download this and install it on the server?
    Thanks
    Edited by: rsar001 on Jul 19, 2010 8:20 AM

  • Hardware requirements for RAC Setup on Linux

    Hi,
    Can any body help me...We are soon going for the RAC setup on linux operating system.So,i need to provide the customer,the hardware needed for this setup.
    Please send me the list of all the things right from small things....
    regards,
    Mohammed

    Hi Mohammed,
    In addition you may find good information in below doc:
    http://download.oracle.com/docs/cd/B19306_01/rac.102/b28759/toc.htm
    Regards,
    Marcello M.

  • Kernel Upgrade of R/3 4.7 Enterprise in Cluster Setup

    Hi Experts,
    We have a cluster setup with SAP R/3 Enterpirse 4.7 with MSSQL in windows 2003 server with node A and node B. Presently the system is running on Node B.
    We also have two application servers (Dialog Instance).
    Now I want to upgrade kernel of R/3 system. Please let me know what is the procedure for upgrading the kernel in cluster setup.
    Appreciate quick response.
    Regards
    Sharath

    Hi All,
    I have successfully upgraded the kernel patch from 640-43 to 640-201 for R/3 4.7 with cluster setup. Currently the system was in Node B.
    The only problem which I faced after copying the files to run folder was that the system was not coming up. So we copied back the old kernel files and started the system and it was coming online.
    Wen we anayzed the problem we came to know that after copying the latest kernel files the system was not coming up as some DLLs were missing. The Note 684106 - Microsoft runtime DLLs solved the issue. Downloaded the files R3DLLINSTZIP which was given in the note and installed the files and after that my system came up with the latest kernel files.
    Hope this will be helpfull for someone in futue.
    Regards
    Sharath Babu

  • How do you setup GNU/Linux on an iMac G4 with Panther OS X 10.3.9 ?...

    How do you setup GNU/Linux on an iMac apple computer
    http://en.wikipedia.org/wiki/IMac_G4
    with Panther OS X 10.3.9
    http://en.wikipedia.org/wiki/OSX10.3 ?...

    There is a Ubuntu 10.4 version for Mac with PPC architecture; not sure
    how that would work in the computer you may consider running it in.
    Some leads on that kind of discussion can be found by using a Google
    search, and the words: *ubuntu for PPC G4 Mac* + read through results.
    Or choose to search using these terms: *Open Source Linux PPC G4 Mac*
    A few results point back to Apple Discussions, where there were inquiries.
    Note the version of a Linux-type of OS, compatible with Mac PPC hardware,
    on the following page-link: *• Ubuntu 10.0.4 LTS (Lucid Lynx)*
    http://cdimage.ubuntu.com/ports/releases/10.04/release/
    {You would have to put the image, as downloaded from such a site, on a CD
    for use as an Installer; then follow any instructions as available to install it.}
    An old page (from 2007?) with some details, some not up-to-date,
    may be of help to a limited degree, from here: Ubuntu PPC wiki
    https://wiki.ubuntu.com/PowerPCFAQ#Is%20Ubuntu%20supported%20on%20PowerPC?
    Or: https://wiki.ubuntu.com/PowerPCFAQ
    See their home page to look for other information on the site: https://wiki.ubuntu.com/
    These wiki groups are like communities, with rules & other such considerations; you
    may be able to also find +Open Source+ sites with information and builds of suitable
    Linux versions capable of running well in an older PPC Mac. There are newer ones
    that would have no problem on a newer Intel-based Mac, of course.
    • Mac Linux Links: (perhaps too dated)
    http://lowendmac.com/linux/index.shtml
    • Comparison of Linux distributions:
    http://en.wikipedia.org/wiki/Comparisonof_Linuxdistributions
    Hardware support in the older PPC G4 Mac computer should be considered, in order
    to have the better experience possible with the Linux-based OS; and some specs in
    an old Mac may not be ideal. The graphics processor unit and amount of dedicated
    RAM for the graphics alone, could make a difference; depending on what you had in
    mind when running a Linux-based OS in a PPC Mac. So consider hardware specs.
    Some hardware in the computer may or may not be supported by the Software; and
    then, there may be some problems implementing a Linux OS version in your Mac.
    If you had an old Mac Mini (PPC or early Intel) & considered running Linux, there's
    a page of general ideas worth a peek: http://sowerbutts.com/linux-mac-mini/
    You may not have enough room on the existing internal hard disk drive inside the
    iMac G4, for a complete OS X 10.3.9 or Later OS X, and a partition for Linux in it.
    And, you may find through reading further, if you need to (or don't) start fresh and
    have a partition for each different OS, or not. For organizational purposes and ease
    of removing one system or the other, a partitioned hard disk drive may be best.
    There probably is a way to have Linux on an external bootable hard disk drive; &
    that would have to be compatible with the Mac hardware requirements to be seen
    and used by the computer, and also the ability to restart from Linux into Mac OS X
    would have to exist in the system software. Hopefully without incident.
    You will have some degree of a learning curve in this matter, from reading up on
    the details of any viable Linux versions, through the ones likely to work in your
    old PPC G4 Mac, and then if there are more than two or three good ones, of those
    what one would be most likely to be worth the additional effort to attempt to use in it.
    Depending on the version and specifications of your iMac G4 computer, there could
    be different versions of linux systems capable of running it. However, some items
    may not be supported which you would need to have working, such as wi-fi internet
    and sleep mode, etc; among others. Searching the net does bring up more info.
    {You may find, that going to OS X 10.4.11 would be more worth the effort, in that
    most everything would 'just work' and you can still find many good software bits
    and some fine freeware or low cost shareware to run on it. Linux versions vary
    so much on what they can and cannot do, I would not recommend running it.}
    Since I am not an expert in the matter, hopefully someone with a experimental time
    and results in a similar vintage Mac as yours will reply and give you insightful info.
    Good luck & happy computing!

Maybe you are looking for

  • [2007A] - [8.81] Aging report with passed due date invoices in 120+ column

    Hello, My database contains invoices due in october 2010. When I run the aging report, the amount of the invoice is not in column 0-30 but in column 120+ When I run the dunning wizard, these invoice are not included. i tried to look all the parameter

  • Place the Adobe Form as PDF file in a URL

    Hi Experts, I have created an Adobe form and got the PDF data in the form of XSTRING now I need to place this as PDF file in the URL which I have generated programmatically. Not sure on how to do it. Any function modules or classes to place this as P

  • PS Elements 12 very slow, very very slow!

    Hi, I started using Ps elements 12 to try it out. My past experience with elements is flawless speed but with 12 for example using the smudge tool can sometimes take up to 30+ seconds to complete. I can actually watch the progress are the picture as

  • MS-8606 Mega TV Tuner audio cable

    Got the MS-8606 to complete my new Mega 865 build. The internal audio cable supplied appears wrong. Should be same connector both ends or should be a converter ? The socket on the main board seems to take same connector as the one on tuner card but c

  • When booting 7 64bit on HP Pavilion, I get a window saying loading "Trayapp.msi" .

    When booting 7 64bit on HP Pavilion,  I get a window saying loading "Trayapp.msi" It asks for a CD containing such. What can I do I have no CD? This new Desktop has Windows loaded from the Internet.