10.1.3 EA1 Problem setting custom visual javabean
Hi,
I'm using the "Load Dir.." feature in "Manage Libraries". There's no problems setting that
but when i try to drop a custom visual javabean into JFrame, JDialog or JPanel, I only c a blank coltrol... an invisible control...... i did restart JDev but still the same... and my the others collegue got same problems as well..... We got no choice but downgrade to Preview version.... sad to say...... and we miss a lot new features in EA1.......
Please help....
Thanks
Hi,
Sorry, let me describe it in more detail :-
Problem No. 1, "Add JavaBeans" not able to list any custom visual javabeans which added using "Load Dir..." in Manage Libraries but no problem with "User" location.
Problem No. 2, Create JFrame "A" with nothing inside, then create JFrame "B" which inherited from JFrame "A". Notice, GUI Designer will show an invisible JFrame "B".
Thanks
Similar Messages
-
Problems setting up Mail to Exchange
Hey everyone,
Having a few problems setting up mail to exchange on a Nokia 5800.
We have the latest version of Mail to Exchange installed.
Were using Microsoft Exchange 2007.
Example serup of what we have done:
Mail to exchange - New profile - Input Username and Password of domain account - Input domain name - Chose Internet as means of connection -
The Nokia goes off and searches for the domain information, finds it OK. Shows a message regarding a server certificate, we chose to install this certificate this time only.
Phone crashes?
Any ideas whats going on?
ThanskHi Jim,
Depending on the customer feedback, it works fine. Apple Mail the client that comes with OSX supports standard protocols (POP3, IMAP, SMTP), these are all supported by Exchange 2010.
If you're running Mac OS 10.4 Tiger or Mac OS 10.5 Leopard, you can still use the Mac Mail App to connect to your account. However, you need to connect to your account without using IMAP or POP.
If you're running Mac OS 10.6 Snow Leopard or Mac OS 10.7 Lion, you can use the Mail program included with those releases to connect to your email account automatically using an Exchange account.
When you use Mac OS 10.6 Snow Leopard or Mac OS 10.7 Lion and connect using an Exchange account, you can use features that aren't available to users who connect through IMAP or POP, including iCal and Address Book.
More details about Set up email in Mac OS X Mail, please refer to:
https://support.office.microsoft.com/en-in/article/Set-up-email-in-Mac-OS-X-Mail-de372dc4-9648-4044-a76c-e8a60e178d54?CorrelationId=a0ce4c19-1492-4e3b-bc7e-4af83d3cb347&ui=en-US&rs=en-IN&ad=IN
Additional, I find a similar thread about your question, for your reference:
https://social.technet.microsoft.com/Forums/exchange/en-US/b112b61e-401f-4ad9-b459-a25673ff5407/connecting-to-exchange-2010-using-apple-mail?forum=exchange2010
https://social.technet.microsoft.com/Forums/en-US/d3c9b4ad-822b-4a7c-88b8-39df3f166f96/how-to-setup-exchange-account-on-macbook-os-x?forum=exchange2010
Best Regards,
Allen Wang -
Problems Setting up a Direct Debit
has anyone experienced any problems setting up a direct debit ??
I've been a BT customer for approximately 20 years and have had the same account number. I've moved house a few times and retained the same account. My last house move wasn't so successful as after moving in and having broadband re set up again... I received a letter in the post saying I had requested a "termination" and a parcel was included to send my router back etc... plus... I'd be charged £100+ for the disconnection...
Anyway I got on the phone to BT and the advisor appologised for the mix up... and suggested I cancel my direct debit with the bank to make sure the disconnection fee wasn't taken from my account.....
Ever since then... I have not being able to set up a direct debit online or by speaking with several BT helpdesk staff. I email BT asking for an explaination - NOTHING. BT helpdesk staff assure me that the direct debit will work this time and will contact me if there is a problem... again NOTHING. I even tried writing a letter to the head of customer services... I think the name Warren Buckley rings a bell.. Someone did email me back suggesting I use the online facility.... REALLY!! Do BT not have a fault tracking database of customer issues... so they can see I've already tried to set up the direct debit online...
Anyway ..... I've just noticed this forum now... so this is my latest attempt to see if anyone senior enough at BT will be embarrassed and try and sort out my account so I can start paying my bill using Direct Debit again... I'm pretty sure all that needs to happen is to be given a new account number or an account alias that can be sent to my bank. Otherwise... I'll just carry on waiting to receive the automated message from BT saying I haven't paid and then go and pay online... But I am worried one of these automated messages will arrive the day I go on a 2 week holiday and I find myself cut off when I get home... giving me more pain....
PLEASE HELP BT ;o)
regards
DaveBI have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail within 5-6 working days.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Problem with Customer Interaction Module in Web Channel Builder
Hello Everyone,
Facing an issue with Web Channel Builder Customer Interaction Module.
In Web channel builder we have done all the required configuration changes, but still we are not able to get the reviews and rating part in the product detail page.
We have created a new application and all the other module are working fine ,but the only module that is causing problem is Customer Interaction module. Every time we are activating this module rest modules stops working.
Can anyone please let us know what could be the root cause of this problem.
Are there any setting that has to be done ...that we are missing in?
I have studied that Product Catalogue is integrated with this module. Are there any setting that are to be done in the Product Catalogue module in Web channel builder?
Thanks in advance!
Regards,
PBHi PB,
Did you please get any proper error / exception in log file? Did you please check the web.xml as well that there is no same application name defined.
Can you please also copy paste the log please.
Thanks,
Hamendra -
Problem setting up smtp mail out .
Hi all you good people .
I am having a problem setting up the mail program . I'm using mail two under os-x leopard 10.5.7 . I have the pop mail working fine , but for some reason or another it wont send the mail out . I remember I got it working before , but it was a pain in the butt to do . So I ma forced to use Microsoft Entourage for my mail receiving and sending . I think Microsoft Takes more skill to use than the apple mail program .
I would love for someone to help me solve this . My mail server is from time warner . I use there High speed internet for my mail access .
P.S Roadrunner .Hi,
I assume you are using Mail 3.6, and not "mail two"?
What Authentication are you using on this SMTP? If not already, try using None, and removing Password and Username from SMTP setup for at least one test. Most Roadrunner SMTP are authenticated by reference to the IP address of your Modem, and using a separate authentication of the SMTP results in failure.
Mail Preferences/Accounts/Account Information, then click on the arrows beside the name of the SMTP in the section on Outgoing Server. After you click on the arrows, choose Edit Server List. Then if the SMTP is set up with the correct name, etc, click on the Advance Tab, use Custom Port with Port 25, None as authentication, and do not enter any Username and Password. Under authentication of None, the name of the SMTP will not have your Username appended. This is the equivalent, after having previously done the set up, to those email clients with a setting to use the info of the Incoming for authentication.
Let us know, but Roadrunner can vary from area to area on this, but this is the way it seems to always work.
Ernie -
Portrait printing problem on custom paper size
Hi,
i want to print on custom paper size - 500x700mm, but cant set custom paper size straight in Illustrator, only in printer driver. When I set it up and print file, all shapes are smaller on print than in file! Same thing happens with 320x450mm size. After some searching i tried to print it in landscape (wider side in printer) and everything is ok!!! but when i get back to portrait it is all smaller again :/
On pre-intalled A4 size everything is ok.
Can anyone help me, i want to print on 700x500mm but my printer is only 600mm wide ;/
Tried to change any possible fit, resize and rotate option throughout app, system and in printer with no success.
Specs:
Mac OS 10.9 (Retina MBP 15)
Illustrator CC and CS5 (tried on both)
HP DesignJet 510 (CH336A)Yeah, HP tech support is iffy at best.
I think you're on the right track.
I don't think the issue is Illustrator. In my experience, the Art Board feature is exactly what is warranted for custom page sizes.
I also wouldn't think it is an OS issue, as the drivers need to conform to OS development rules. If the driver "says" it can do it, it SHOULD do it. If it doesn't, that's not the OS's fault.
In cases where you're trying to go "outside" the page-size presets of the printer driver, this is where people encounter problems, which is why I think the issue is the print driver. My solution has been to use an existing page-size preset, and hand-trim after printing. But in quantity prints, this becomes a pretty serious problem.
One other thought. Someone else on this forum found that they could use custom page sizes (with certain printers) if they always fed the paper in its "tall" position, rather than feeding it in "wide." This might require you to rotate artwork in ai, I'm not sure. But it's worth a try in attempting to get your custom page size to print properly.
Good luck. -
Trying to insert a custom visual bean gives me an error
I've created a custom bean based on javax.swing.jpanel and it compiles fine. I've added it to the component panel as a visual bean but when I try to place it on a frame it throws me an error, which can be found below. I've definately had this visual bean working on another computer using forte but it may not be the same version of forte or java as on this machine. This machine has forte 3.0 and java 1.3.1. Other custom visual beans work fine. Any help greatly appreciated.
Mike
Fri Oct 05 12:37:41 BST 2001: java.lang.NullPointerException: null
java.lang.NullPointerException
at org.netbeans.modules.form.RADVisualContainer.initLayoutSupport(RADVisualContainer.java:48)
at org.netbeans.modules.form.HandleLayer.addVisualBean(HandleLayer.java:436)
at org.netbeans.modules.form.HandleLayer.access$1800(HandleLayer.java:43)
at org.netbeans.modules.form.HandleLayer$HandleLayerMouseListener.mousePressed(HandleLayer.java:904)
at java.awt.Component.processMouseEvent(Component.java:3712)
at java.awt.Component.processEvent(Component.java:3544)
at java.awt.Container.processEvent(Container.java:1164)
at java.awt.Component.dispatchEventImpl(Component.java:2593)
at java.awt.Container.dispatchEventImpl(Container.java:1213)
at java.awt.Component.dispatchEvent(Component.java:2497)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:2451)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:2210)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:2125)
at java.awt.Container.dispatchEventImpl(Container.java:1200)
at java.awt.Window.dispatchEventImpl(Window.java:926)
at java.awt.Component.dispatchEvent(Component.java:2497)
[catch] at java.awt.EventQueue.dispatchEvent(EventQueue.java:339)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:131)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:98)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:93)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:85)Hi, I have exact the same problem. Have you got any answer for this problem yet? Please forward it to me if you have one. Many thanks.
-
Having problems setting up ntlworld email on ipad 2. Help?
I am having problems setting up my ntlworld email on my new ipad 2. It works ok on my iphone 3. Trying to use the same settings as my iphone but its not setting up.
This should work for all email addresses managed by Virgin Media
@ntlworld.com
@blueyonder.co.uk
@virgin.net
@virginmedia.com
1. Turn on Settings > Airplane Mode.
2. Open Settings > Mail, Contacts, Calendars.
3. Tap Add Account….
4. From list choose Other.
5. Choose Add Mail Account.
6. In the New Account screen enter customer’s:
Name (e.g. Johnny Appleseed)
Email (full email address, e.g. [email protected])
Password (password for email address)
Description (this will automatically get filled in, but you can put something more meaningful e.g. ‘NTLWorld Email’)
7. Tap Next.
8. In the next screen ensure IMAP is selected.
9. Enter the following settings:
Incoming Mail Server (section)
Host Name imap.virginmedia.com
User Name (full email address, e.g. [email protected])
Password (password for email address)
Outgoing Mail Server (section)
Host Name smtp.virginmedia.com
User Name (full email address, e.g. [email protected])
Password (password for email address)
10. You will get an error that the IMAP server is not responding (Airplane Mode being on); just tap OK.
11. Tap Next.
12. You will get an error that the account may no be able to send or receive emails; tap Save anyway.
13. On next screen turn Notes off and tap Save.
14. The new account should be created; we now need to tweak some settings in it.
15. Tap the new account in the list.
16. On the next screen tap Account.
17. Where is says Outgoing Mail Server tap on SMTP smtp.virginmedia.com >.
18. On the next screen, under Primary Server, tap smtp.virginmedia.com.
19. Ensure the settings are as follows:
Outgoing Mail Server (section)
Host Name smtp.virginmedia.com
User Name (full email address, e.g. [email protected])
Password (password for email address)
Use SSL is turned ON
Authentication Password
Server Port 465
20. Tap Done.
21. You will get an error that the SMTP server is not responding; just tap OK.
22. Tap Done.
23. You will get an error that the account may no be able to send or receive emails; tap Save anyway.
21. Tap Account to go back one screen.
22. Tap Advanced at the bottom of the screen.
23. At the bottom of the screen ensure the settings are as follows:
Incoming Mail Server (section)
Use SSL is turned ON
Authentication Password
IMAP Path Prefix is left blank (will show ‘/’)
Server Port 993
21. Tap Account to go back one screen.
22. Tap Done.
23. You will get an error that the IMAP server is not responding; just tap OK.
24. Tap Done.
25. You will get an error that the account may no be able to send or receive emails; tap Save anyway.
26. Tap Mail… to go back one screen.
27. Tap Settings to go back one screen.
28. Turn Airplane Mode to OFF.
29. Press Home button and open Mail app to check it is now collecting and sending email. -
CR 2008 SDK: how to set custom paper size?
Dear forum users, I'm trying to use Crystal Reports 2008 SDK to print barcode labels to a Datamax Printer.
The printer uses a custom page size. Can anyone tell me how to set custom page size and margins using C# and CR2008 SDK?
Best regards
AlessandroI'm experiencing this problem: I need to print barcode labels which are 4 x 9 cm each (a custom paper size). The report has been build correctly, orientation is right but when I print the labels programmatically by an application I made the label gets printed in a wrong way.
In particular, orientation and paper size are not correct.
So I would like to try to force both of them (both the orientation and the custom paper size). How can I do that?
Best regards
Alessandro -
Problems with Custom Paper Size and Address Book
I'm having some trouble printing from Address Book onto a custom paper size. I'm attempting to set up a notecard, and only print one at a time, rather than multiple columns as in the Labels option. The trouble is that when creating this small size, Address Book doesn't recognize it as anything other than a regular sheet of US Letter, and thus prints the address in the middle of the page.
I have no problem printing envelopes, though, which seems odd because they too go in the manual feed for my printer. The notecards are similar width to the envelopes, but only about half the length.
Has anyone else experienced problems with custom paper sizes printing improperly? I'm using an HP 4515 LaserJet, but have access to a few other laser printers. Thanks for any insightI have had the same problem, and with the same result; Adobe Tech Support can't help or fix, after 15 hours on phone, Level 2 support. It is a software bug Adobe has, and can't seem to fix. I just upgraded to Lightroom CC, and my problem migrated with the upgrade. I print in Photoshop fine.
If you found an answer, I would appreciate knowing how to do it!
Thanks -
Issue in setting custom identity service for soa 11.1.1.4
Hello,
I am facing issue in setting custom identity service for soa 11.1.1.4
It is not picking up the implemented UserManager (in custom IDM) implemented via ServiceProvider and IdentityStoreService.
This is configured in jps-config.xml
The same setup was working in soa 11.1.1.2
I believe there is a change done in JpsProvider in bpm-service.jar to authenticate via default login context from oracle.security.jps.internal.jaas.module.authentication.JpsUserAuthenticationLoginModule
If my uderstanding is correct,
Please guide me in implementing custom identity store and services for bpm services for soa 11.1.1.4
Tried various work arounds but no luck.
Thanks
BalaHi...
Can u tell me how did u set up custom identity service for 11.1.1.2 ?
Thanks -
Problems setting up username & password for SQL
Due to the outstanding advice I recieved from this excellent forum, I have managed to overcome my first problem with declaring a new Class.
This leads me to request help with my next biggest problem:
Setting up a user GUI that takes a "username" & "password" that will be used to access a password protected database.
I am a simple bloke, with simple thought processes, so please, go easy on me...
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.sql.*;
public class DBQuery1 {
String username = "" , password = "";
public static void main(String[] arguments) {
PassDB UPass = new PassDB();
String data = "jdbc:odbc:JavaTestDataBase";
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection conn = DriverManager.getConnection(data, "" + username, "" + password);
Statement st = conn.createStatement();
ResultSet rec = st.executeQuery(
"SELECT Title, ContactID, First, Last, Dear FROM Contacts "
+ "WHERE (Title='Mr') ORDER BY ContactID");
/* ResultSet rec2 = st.executeQuery(
"SELECT Subject, ContactID FROM Calls "
+ "WHERE (Subject Is Not Null) ORDER BY ContactID");
System.out.println("\nFirst Name\tSurname\t\tNick Name\t\tSubject\n");
while(rec.next()) {
System.out.println(rec.getString(3) + "\t\t" + rec.getString(4) + "\t\t" + rec.getString(5) /* + rec2.getString(1) */ );
st.close();
catch (SQLException s) {
System.out.println("SQL Error: " + s.toString() + " " + s.getErrorCode() + " " + s.getSQLState());
catch (Exception e) {
System.out.println("Error: " + e.toString() + e.getMessage());
class PassDB extends javax.swing.JFrame implements ActionListener {
String username = "", password = "";
JTextField uname = new JTextField(10);
JTextField pword = new JTextField(10);
// JPasswordField pword = new JTextField(10);
PassDB() {
super("duBe's database logon");
setSize(220, 160);
setDefaultCloseOperation(EXIT_ON_CLOSE);
JPanel pane = new JPanel();
JLabel unameLabel = new JLabel ("Username: ");
JLabel pwordLabel = new JLabel ("Password: ");
JButton submit = new JButton("OK");
submit.addActionListener(this);
pane.add(unameLabel);
pane.add(uname);
pane.add(pwordLabel);
pane.add(pword);
pane.add(submit);
setContentPane(pane);
setVisible(true);
public void actionPerformed(ActionEvent evt) {
PassDB clicked = (PassDB)evt.getSource();
username = uname.getText();
password = pword.getText();
This code generates two errors, stating:
C:\Java_progs>javac DBQuery1.java
DBQuery1.java:14: non-static variable username cannot be referenced from a static context
Connection conn = DriverManager.getConnection(data, "" +
username, "" + password);
^
DBQuery1.java:14: non-static variable password cannot be referenced from a static context
Connection conn = DriverManager.getConnection(data, "" +
username, "" + password);
^
2 errors*****************************
The code works when I remove the reference to the variables "username" & "password" in Connection "conn" call & replace them with the actual username & password, but this is not exactly what I was after. I was hoping to make the program responsive to each individual user, not set in code.
I also would like to make the program pause after the call in "main" to "PassDB" to wait for "PassDB" to exit before continuing.
I would also like to make "PassDB" destroy itself after the "OK" button is pressed & the "username" & "password" set.
If that isn't enough for you, I would really like the program to search 2 different database tables, return their values & compare them to be sure that they are the same.
When I try & search 2 different tables, as in:
ResultSet rec = st.executeQuery(
"SELECT Title, ContactID, First, Last, Dear FROM Contacts "
+ "WHERE (Title='Mr') ORDER BY ContactID");
ResultSet rec2 = st.executeQuery(
"SELECT Subject, ContactID FROM Calls "
+ "WHERE (Subject Is Not Null) ORDER BY ContactID")javac tells me that "ResultSet" is set to null 0
As always, I am extremely appreciative of any assistance you are able to offer.
Kind regards
duBedat
[email protected]This is where I'm at now:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.sql.*;
public class DBQuery {
static String username = "" ;
static String password = "" ;
public static void main(String[] arguments) {
PassDB UPass = new PassDB();
String data = "jdbc:odbc:JavaTestDataBase";
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection conn = DriverManager.getConnection(data, "" + DBQuery.username, "" + DBQuery.password);
Statement st = conn.createStatement();
ResultSet rec = st.executeQuery(
"SELECT Title, ContactID, First, Last, Dear FROM Contacts "
+ "WHERE (Title='Mr') ORDER BY ContactID");
/* ResultSet rec2 = st.executeQuery(
"SELECT Subject, ContactID FROM Calls "
+ "WHERE (Subject Is Not Null) ORDER BY ContactID");
System.out.println("\nFirst Name\tSurname\t\tNick Name\t\tSubject\n");
while(rec.next()) {
System.out.println(rec.getString(3) + "\t\t" + rec.getString(4) + "\t\t" + rec.getString(5) /* + rec2.getString(1) */ );
st.close();
catch (SQLException s) {
System.out.println("SQL Error: " + s.toString() + " " + s.getErrorCode() + " " + s.getSQLState());
catch (Exception e) {
System.out.println("Error: " + e.toString() + e.getMessage());
class PassDB extends javax.swing.JFrame implements ActionListener {
static boolean getOut = false;
JTextField uname = new JTextField(10);
JTextField pword = new JTextField(10);
// JPasswordField pword = new JTextField(10);
public PassDB() {
super("duBe's database logon");
setSize(220, 160);
setDefaultCloseOperation(EXIT_ON_CLOSE);
JPanel pane = new JPanel();
JLabel unameLabel = new JLabel ("Username: ");
JLabel pwordLabel = new JLabel ("Password: ");
JButton submit = new JButton("OK");
submit.addActionListener(this);
pane.add(unameLabel);
pane.add(uname);
pane.add(pwordLabel);
pane.add(pword);
pane.add(submit);
setContentPane(pane);
while(getOut == false)
setVisible(true);
public void actionPerformed(ActionEvent evt) {
PassDB clicked = (PassDB)evt.getSource();
DBQuery.username = uname.getText();
DBQuery.password = pword.getText();
getOut = true;
} Any advice is greatly appreciated
duBe -
Problems setting up an NFS server
Hi everybody,
I just completed my first arch install. :-)
I have a desktop and a laptop, and I installed Arch on the desktop (the laptop runs Ubuntu 9.10). I had a few difficulties here and there, but I now have the system up and running, and I'm very happy.
I have a problem setting up an NFS server. With Ubuntu everything was working, so I'm assuming that the Ubuntu machine (client) is set-up correctly. I'm trying to troubleshoot the arch box (server) now.
I followed this wiki article: http://wiki.archlinux.org/index.php/Nfs
Now, I have these problems:
- when I start the daemons, I get:
[root@myhost ~]# /etc/rc.d/rpcbind start
:: Starting rpcbind [FAIL]
[root@myhost ~]# /etc/rc.d/nfs-common start
:: Starting rpc.statd daemon [FAIL]
[root@myhost ~]# /etc/rc.d/nfs-server start
:: Mounting nfsd filesystem [DONE]
:: Exporting all directories [BUSY] exportfs: /etc/exports [3]: Neither 'subtree_check' or 'no_subtree_check' specified for export "192.168.1.1/24:/home".
Assuming default behaviour ('no_subtree_check').
NOTE: this default has changed since nfs-utils version 1.0.x
[DONE]
:: Starting rpc.nfsd daemon [FAIL]
- If I mount the share on the client with "sudo mount 192.168.1.20:/home /media/desktop", IT IS mounted but I can't browse it because I have no privileges to access the home directory for the user.
my /etc/exports looks like this:
# /etc/exports: the access control list for filesystems which may be exported
# to NFS clients. See exports(5).
/home 192.168.1.1/24(rw,sync,all_squash,anonuid=99,anongid=99))
/etc/conf.d/nfs-common.conf:
# Parameters to be passed to nfs-common (nfs clients & server) init script.
# If you do not set values for the NEED_ options, they will be attempted
# autodetected; this should be sufficient for most people. Valid alternatives
# for the NEED_ options are "yes" and "no".
# Do you want to start the statd daemon? It is not needed for NFSv4.
NEED_STATD=
# Options to pass to rpc.statd.
# See rpc.statd(8) for more details.
# N.B. statd normally runs on both client and server, and run-time
# options should be specified accordingly. Specifically, the Arch
# NFS init scripts require the --no-notify flag on the server,
# but not on the client e.g.
# STATD_OPTS="--no-notify -p 32765 -o 32766" -> server
# STATD_OPTS="-p 32765 -o 32766" -> client
STATD_OPTS="--no-notify"
# Options to pass to sm-notify
# e.g. SMNOTIFY_OPTS="-p 32764"
SMNOTIFY_OPTS=""
# Do you want to start the idmapd daemon? It is only needed for NFSv4.
NEED_IDMAPD=
# Options to pass to rpc.idmapd.
# See rpc.idmapd(8) for more details.
IDMAPD_OPTS=
# Do you want to start the gssd daemon? It is required for Kerberos mounts.
NEED_GSSD=
# Options to pass to rpc.gssd.
# See rpc.gssd(8) for more details.
GSSD_OPTS=
# Where to mount rpc_pipefs filesystem; the default is "/var/lib/nfs/rpc_pipefs".
PIPEFS_MOUNTPOINT=
# Options used to mount rpc_pipefs filesystem; the default is "defaults".
PIPEFS_MOUNTOPTS=
/etc/hosts.allow:
nfsd: 192.168.1.0/255.255.255.0
rpcbind: 192.168.1.0/255.255.255.0
mountd: 192.168.1.0/255.255.255.0
Any help would be very appreciated!Thanks, I finally got it working.
I realized that even though both machines had the same group, my Ubuntu machine (client) group has GID 1000, while the Arch one has GID 1001. I created a group that has GID 1001 on the client, and now everything is working.
I'm wondering why my Arch username and group both have 1001 rather than 1000 (which I suppose would be the default number for the first user created).
Anyway, thanks again for your inputs. -
Problems setting up static routing
HI
I'm having a problem setting up static routing. I keep getting the message "invalid static route". I have an E1550 router and my frimware is up to date. I have tried a few different gateway addresses ie 192.168.1.1, 127.0.0.1 and my router's address on the net, but I keep getting the same message. Has anyone else had this problem and been able to fix it?I think the E1550 router supports LAN to LAN routing provided that you have two local networks. If you only have a plain modem and the E1550, I believe you can't do Static routing on that type of setup. Found this link that might help: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=12a84336a124498eb5d6f0204b85191e_17589.xml&pid=80&...
-
Problems Setting Up Developer Users
I am having a problem setting up developer users and I am trying to determine if I am missing a step or if there is a configuration problem on my staging and production systems.
What I want to do should be very simple. I want to create a user that can create an application and see the information under the "Application" tab in the Navigator.
I have created the user using the following steps on 3.0.9.82 for Unix:
1. Create the user
2. Make the user a full administrator (rather than end user)
3. Make the user a member of the portal_developers group
4. Make the user's default group the portal_developers group
However, when I do this the user does not see the information under the
"Application" tab. The only way I can get the user to see the info under the
"Application" tab is to make him a member of the Portal_administrators
and/or DBA group. Both my staging and production boxes have the same result.
Does anyone have any thoughts or suggestions on what might be happening?Thank you- I have read through that thread and can see some resonance with my issue.
My AOL emails work VERY fast with BB, in fact almost simultaneously received on PC & Torch " ping ping!"
This issue only raised its ugly head when I had 2 Torches replaced by my insurers.
Whilst the claim was in process I used a new Curve, loaded from backup on PC to keep emails going and of course phone & web facilities. ( I use the BB to power internet via bluetooth to my PC / laptop when living on a remote island with no phone lines or power supplies) All was fine. Swapping email accounts took a few minutes with the usual password confirmations for each AOL screenname etc.
Then the new Torches came back from insurers, and I tried to swap devices. Phoning & texting is fine. Al data and contacts swap over fine.
SETUP email accounts.............stymied every time. It says repeatedly that my user name/password is invalid etc etc etc
Have tried security wipes. Have tried setting up new BB ID & passwords on PC website. All is OK until I try to setup emails on the Torches. This has used up ridiculous amounts of time- all wasted.
I love the BB phones and the fast email push......in fact I recently bought a new Sony Xperia Z1 but sent it back because of wifi coverage meant no emails on that superb phone for lots of the time.
Good old BB I said..........I always get emails wherever I am. ( Rural Scotland has very patchy radio & wifi coverage)
Was about to purchase new Z10s just to get a bigger screen, but now I am averse to buying ANY BB phone again because this present mess means I may never get emails set up again. How nuts is that?
Many thanks for all help & suggestions..........boy do I need them!!
Kind wishes from West of Scotland
Fair winds and kind landfalls
Maybe you are looking for
-
ICloud keeps duplicating my contacts, any of which I need to delete anyways. Is there a way to delete multiple contacts at once? I have been deleting them one at a time, but they keep reappearing.
-
I turned on my iMac today running Lion and typed in my password and it went to the gray screen with the apple logo and a little wheel spinning below it and won't go any further. Ive tried the Pram reset with cmd alt r p. no help. Ive tried a safe boo
-
How do I convert the PDF to Word doc? It is not working for me
Just downloaded the conversation and I am not successful - need to convert PDF to WOrd doc - step-by-step instructions please
-
I'm trying to use DUBturbo but there is a weird problem
I'm trying to use DUBturbo but very time i open it, it comes up with apple textedit saying loads of random letters, numbers and symbols (possible codes) which i don't understand
-
Hi, I am using the consolidated accounts and when the main account is on hold it still allows to post invoices to the child account even though the parent is on hold. Is there any way around this?? thanks Mark Edited by: Paul Finneran on Feb 9, 2009