10.1.4 Upgrade on an AMD Opteron 64bit metadata repository

Hi,
I have a Portal MDR on a 64bit AMD Opteron Linux RHEL 4 hardware. I would like to upgrade it to 10.1.4 from 10.1.2.0.2.
The upgrade guide says the upgrade has to be run from the machine where the Portal repository is. But, I cant find a download for this hardware!
Will the 64bit download for itanium work on my hardware?
I have done a remote install of MRCA to load the repository from a 32bit machine
Kindly help
Thanks
Vikas

Hi,
Just a few remarks about the versions which you are about to install :
<li>Oracle Database (11.2.0.1) => should be at least 11.2.0.2 as 11.2.0.1 is not supported with RCU
<li>Repository Creation Assistant (11.1.1.2.0) => take RCU version for 11.1.1.4 as it will create the 11.1.1.4 version of the repository for you
<li>Weblogic (10.3.5) => you need 10.3.4 for IDM 11.1.1.4 andd PFRD 11.1.1.4
<li>Identity Management (11.1.1.2.0) => if you are going to install WebLogic 10.3.5, you should install IDM 11.1.1.2 and patch it to 11.1.1.4 !
<li>SSO metadata Repository Creator Assitant (10.1.4.3.1) => this is good, check Note 1069426.1 as it mentions some patches which need to be installed if you use a 11.2 database
<li>Portal, Forms, Reports and Discoverer (11.1.1.2.0) => install patch set 11.1.1.4 on the software home before running the config !
If you follow my recommendations, you will end up with the following software :
<li>IDM 11.1.1.4 with SSO 10.1.4.3 associated with OID
<li>PFRD 11.1.1.4
You can use a single middleware home for all this software. Make sure to install Weblogic 10.3.4 as 10.3.5 is not supported with FMW 11.1.1.4 products. Also make sure to install the appropriate JDK before installing weblogic.
Thanks,
EJ

Similar Messages

9i metadata repository be upgraded to 10g

Hi,
I hav a question from the customer, they are looking for migration from Oracle AS 10g Rel 1 (9041) to AS 10g Rel 2 (10.1.2.0.2) they wanted to know if they can upgrade 9i metadata repository to 10g in advance of moving their 10g AS Rel 1 environment to 10g AS Rel 2?

Yes, the repository in fact must be upgraded if you want to perform the complete AS upgrade. Upgrade from the 10gR1 to 10gR2 is pretty straight forward. You are required to perform metadata upgrade by means of the MRUA (Metadata Repository Upgrade Assistant) disk, if you don't have it you should download it from the otn download area.
~ Madrid.

Ffmpeg installation on Solaris 10 AMD opteron processor

Hi All,
I would like to know whether ffmpeg can be installed on Solaris 10 AMD opteron processor.
-BR

I've had the same problem when trying to install it, in my case the disklabel was created with parted and caused the problems. I've relabeld the disk by booting into single user mode from cdrom and executing these commands:
# dd if=/dev/zero of=/dev/rdsk/c0t0d0s0 bs=1024 count=20
# format
(select the disk ('0') and 'label' it)
(verify the label and quit)
# reboot
(installation questions)
Preparing system for Solaris install
Configuring disk (c0t0d0)
- Creating Solaris disk label (VTOC)
Creating and checking UFS file systems
- Creating / (c0t0d0s0)
- Creating /var (c0t0d0s1)
- Creating /usr (c0t0d0s6)
[...]

Processor and Core Count on AMD Opteron Servers

hi
I have a couple of HP DL385 G7 servers, which are dual processor 8 core servers, running Windows 2008 R2. These servers are reporting 16 CPUs each with 8 cores.
The processors are AMD Opteron(tm) Processor 6136. Anyone know how to get this to report correctly ? I need to organise a licensing per core true up for some software applications.
Thanks

garethb,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

AMD Opteron on Oracle 9i.

Hi,
I would like to know if AMD Opteron platfrom is now supported on Oracle 9i using SUSE or Redhat Linux distribution. If not, do we know when will be it available or any plans for this platform? Any info would much be appreciated.
marlonie

I have installed the 32-bit version of 9i (9.2.0.3) onto the 64-bit AMD64 version of Suse's SLES8 United Linux.
One word - - - FAST!
Each 32-bit oracle process sees a full 4G memory map to itself. With that, I can configure the maximum 2.7G SGA without giving up PGA space and user scalability while using System V shared memory and not the shmfs file system. Naturally, the 64-bit version of 9i would be even better but it is not in production yet.

Oracle (9.2.0.2.1) for 64-Bit Windows Compatibility with AMD Opteron 64 bit

Dear all:
please advice is AMD Opteron 64 bit compatible with oracle version (9.2.0.2.1) for 64-Bit Windows .

Help yourself :
http://www.oracle.com/technology/support/metalink/index.html
Nicolas.

Sun ultra 40 boot problem AMD Opteron

Hi,
my Sun Ultra 40 will not boot, it is an AMD Opteron based machine, the cooling fans are spinning, but there is no msg to read on the monitor.
Occasionally I got it to boot, it ran for two weeks, but at next reboot it displays no signal to the video card.
I spotted this in the manual
===
During POST, the BIOS outputs the error code to I/O port 80h. The workstation
motherboard is equipped with a two segment LED display that displays the current
value of port 80h.
===
but I cannot get the glue in it, maybe because I have opteron AMD and this is targeted to sparc.
Last error msg I read was like this:
===
Phoenix trusted core(TM) server
copyright 1985 - 2004 Phoenix Technologies Ltd.
all rights reserverd
Build Time: 12/19/05 09:46:08
sun ultra 40 workstation BIOS version 1.050
CPU Stepping = E4 2000MHz
MemClk = 200 MHz Tcl=3.0 Trcd = 3 Tras = 8 Trp=3
1023 M System RAM Passed
1024 K cache SRAM Passed
System BIOS shadowed
Video BIOS Shadowed
ATAPI CD-ROM: MATSHITA DVD-RAM UJ - 845S
Mouse initialized
Kernel Library version:03.00.00.04
Strong ROM Version:03.00
Build:_P
Event log messages, enter setup to view
ERROR
0280: Previous boot incomplete -
Default configuration used
Press <F1> to resume, <F2> to setup
===
what can I do? is the motherboard faulty? How can I get it to boot from CD
and run a system diagnosis?
What mainboard is compatible? should I replace it with a newer mainboard + CPU + RAM?
Will it fit in the Sun Ultra 40 desktop tower?

Hi,
my Sun Ultra 40 will not boot, it is an AMD Opteron based machine, the cooling fans are spinning, but there is no msg to read on the monitor.
Occasionally I got it to boot, it ran for two weeks, but at next reboot it displays no signal to the video card.
I spotted this in the manual
===
During POST, the BIOS outputs the error code to I/O port 80h. The workstation
motherboard is equipped with a two segment LED display that displays the current
value of port 80h.
===
but I cannot get the glue in it, maybe because I have opteron AMD and this is targeted to sparc.
Last error msg I read was like this:
===
Phoenix trusted core(TM) server
copyright 1985 - 2004 Phoenix Technologies Ltd.
all rights reserverd
Build Time: 12/19/05 09:46:08
sun ultra 40 workstation BIOS version 1.050
CPU Stepping = E4 2000MHz
MemClk = 200 MHz Tcl=3.0 Trcd = 3 Tras = 8 Trp=3
1023 M System RAM Passed
1024 K cache SRAM Passed
System BIOS shadowed
Video BIOS Shadowed
ATAPI CD-ROM: MATSHITA DVD-RAM UJ - 845S
Mouse initialized
Kernel Library version:03.00.00.04
Strong ROM Version:03.00
Build:_P
Event log messages, enter setup to view
ERROR
0280: Previous boot incomplete -
Default configuration used
Press <F1> to resume, <F2> to setup
===
what can I do? is the motherboard faulty? How can I get it to boot from CD
and run a system diagnosis?
What mainboard is compatible? should I replace it with a newer mainboard + CPU + RAM?
Will it fit in the Sun Ultra 40 desktop tower?

Does OBIEE 10.1.3.4 support 64 bit processor AMD Opteron 8216

Hi All,
The OBIEE was installed on 64 bit processor AMD Opteron 8216, but the OBIEE installables were for 32 bit processor.
Is it that OBIEE doesnt work properly with 64 Bit processors or is this any other issue.
Help will be appreciated
Edited by: user11001347 on Dec 18, 2009 2:42 AM

Reuse the software installation, choose a custom installation and choose the component Oracle Business Intelligence ODBC of JDBC Driver
Details here :
http://download.oracle.com/docs/cd/E12096_01/books/AnyInConfig/AnyInConfigOptions2.html#wp1058229
Cheers
Nico

64 bit vs 32 bit Labview on an AMD Opteron 6380

When running my code on an AMD Opteron 6380 processor, Labview 2014 64bit runs 4 times slower than when running with Labview 2014 32bit. However the same code running on and INTEL Core i7 ran twice as fast with Labview 64bit vs 32bit. Does anyone know why? Note that the code is math intensive running a parallel loop that does not cummunicate with the outside world, i.e. no file access, property nodes, etc.Thank you.

Yes the 6380 FPU is shared between two cores. I just ran a diagnostic I made up that generates an array of 1 million random numbers, takes the average of those, and then excutes that repeatedly in a parallel loop. The 6380 showed a 20% to 30% improvement in speed between LV64 & LV32 bit depending on how many cores I told it to use. So that seems to make more sense. The other code that I was running that ran 4 times slower has a complicated clusters within a cluster structure including a large look up table array that is being passed around amoung several vi's. If it is moving that large amount of data around in memory, instead of just the pointer, that might explain it. But why then would the AMD run slower with 64 bit (by a factor of 4) when compared with the Core i7 which ran twice as fast, which kind of makes sense to me if it is moving that data around with twice the bandwidth?

FMS performance on AMD Opteron vs Intel Xeon

Hi All.
We are facing some perfomance issues in several FMS4 running on AMD Opteron. This servers uses a lot more CPU than the ones that we own that run on a similar Intel Xeon with the same load.
Does FMS run better on Intel Xeon? Is there any studies about it?
Regards

I am not processor expert , but what we recommend to our customers is Intel Xeon or faster processor. Most of our testing is done on Intel Xeon. I am not sure whether we have done any comparative study between processors.

Nforce 3 with AMD opteron...64-bit windows & ut2k3

I like hearing about nforce 3. I can just see a 2ghz AMD Opteron running on a single chip nforce 3 with 768mb DDR 400 RAM running UT2003 64-bit version on a NV35. (Summer project anyone?)
Do you think it will pass 150FPS @ 1280x1024 in UT2003? (with 8x aniso and 4x fsaa too)

J*A*G,
Nice specs for your dream machine!!...
But DO NOT neglect to add some ST Thermal Compound (TM) for the best cooling solution there is!! :D :D :D
Markoul
p.s. just ask me and i sent you a pound if it...for free of course :D :D
What is ST Thermal Compound and where can i find it???

Compatibility premiere pro cc 2014 amd opteron 180

Hello. I would like to purchase adobe premiere pro cc 2014 so i downloaded the trial version. I installed it and it seem to work great with my computer. But before i buy it, i would like to know if someone can confirm that it's compatible with my cpu. For now i don't have any problems in the trial version. My processor is an amd opteron 180 dual core socket 939 overclocked at 2.6ghz under windows 7 sp1 64bit. All other parts of my computer reaches the system requirements besides the cpu is not an amd phenom ii as recommended. So assuming the trial version of premiere pro cc 2014 startups and runs without any problems, can i buy it and install it? Thanks!

Hello. I would like to purchase adobe premiere pro cc 2014 so i downloaded the trial version. I installed it and it seem to work great with my computer. But before i buy it, i would like to know if someone can confirm that it's compatible with my cpu. For now i don't have any problems in the trial version. My processor is an amd opteron 180 dual core socket 939 overclocked at 2.6ghz under windows 7 sp1 64bit. All other parts of my computer reaches the system requirements besides the cpu is not an amd phenom ii as recommended. So assuming the trial version of premiere pro cc 2014 startups and runs without any problems, can i buy it and install it? Thanks!

MSI K8N Diamond PLUS e AMD Opteron 185

Hi
I have a MSI K8N Diamond PLUS (bios v.1.2), from the website the AMD Opteron 180 2.4 GHz socket 939 is compatible with the board.
No compatibility info about the cpu AMD Opteron 185 2.6 GHz socket 939. These 2 cpu are very very similar (only different clock).
Do you know if it's really compatible with MSI K8N Diamond PLUS
Thanks in advance

It will work fine but isn't officially supported. Therefor post screen could show "unknown processor" but that's all.

Errors running MRUA for Metadata Repository Upgrade to version 10.1.2.0.2

Hi,
I am encountering the following errors trying to run the MRUA for our Metadata Repository Upgrade on an AIX 5.3 box:
<mrua_runs> ../mrua/mrua.sh -oracle_home /u01/oracle/product/9.2.0.8 -oid_host ourhost.domain.com -oid_ssl_port 3130
Executing mrua.pl
Running on UNIX
OracleAS Metadata Repository Upgrade Assistant 10.1.4.0.1
Enter the password for SYS: <syspw>
Enter the password for cn=orcladmin: <pwd>
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/oii/oiio/oiiol/OiiolTextLogger
at oracle.ias.repqueries.RepositoryQueries.formatGlobalDBName(RepositoryQueries.java:603)
at oracle.ias.mrua.RepQueries.getDBInfo(RepQueries.java:180)
at oracle.ias.mrua.Util.getTheDBInfo(Util.java:50)
at oracle.ias.mrua.MRUA.getInfoFromOID(MRUA.java:690)
at oracle.ias.mrua.MRUA.driver(MRUA.java:297)
at oracle.ias.mrua.MRUA.main(MRUA.java:193)
MRUA detected an error at /mnt/MRUA/mrua/mrua.pl line 237.
<mrua_runs>
Before running the MRUA for the Metadata Repository:
1. I have just recently completed a Middle Tier and Identity Mangement upgrade to 10.1.2.0.2 from version 9.0.4.1.
2. I was able to successfully run the MRUA upgrade script for upgrading our Portal Repository (customer database).
Our Metadata Repository database is at version 9.2.0.8. Has anyone seen these errors or had this problem?
The MRUA CD that I have is labelled "Oracle Metadata Repository Upgrade Assistant and Utilities 10g (10.1.2.0.2) for AIX based systems".
But in the errors I see "OracleAS Metadata Repository Upgrade Assistant 10.1.4.0.1". Is something wrong there? Should it say 10.1.2.0.2?
Any help would be greatly appreciated.
Thanks.
CV
Hi,
I have downloaded the 10.1.2.0.2 version of the MRUA and tried the upgrade again. This time I see the following errors:
Executing mrua.pl
Running on UNIX
OracleAS Metadata Repository Upgrade Assistant 10.1.2.0.2
Enter the password for SYS: <syspwd>
Enter the password for cn=orcladmin: <pwd>
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/oii/oiio/oiiol/OiiolTextLogger
at oracle.ias.repqueries.RepositoryQueries.formatGlobalDBName(RepositoryQueries.java:603)
at oracle.ias.mrua.RepQueries.getDBInfo(RepQueries.java:180)
at oracle.ias.mrua.Util.getTheDBInfo(Util.java:50)
at oracle.ias.mrua.MRUA.getInfoFromOID(MRUA.java:784)
at oracle.ias.mrua.MRUA.driver(MRUA.java:290)
at oracle.ias.mrua.MRUA.main(MRUA.java:186)
MRUA detected an error at /mnt/MRUA_downloaded/ohome/mrua/mrua.pl line 239.
Thanks.
CV
Edited by: CV on Jul 28, 2009 1:37 PM

Hi,
Found out from Oracle that the "oracle/sysman/oii/oiio/oiiol/OiiolTextLogger" class is in the $ORACLE_HOME/oui/jlib/OraInstaller.jar file and as per their suggestion added the jar file to the $classpath list of jar files in the mrua.pl script. I tried running the MRUA again, and ran into the following errors:
Exception in thread "main" java.lang.NullPointerException
at oracle.ias.mrua.MRUA.formatHostPortSid(MRUA.java:1449)
at oracle.ias.mrua.MRUA.getInfoFromOID(MRUA.java:794)
at oracle.ias.mrua.MRUA.driver(MRUA.java:290)
at oracle.ias.mrua.MRUA.main(MRUA.java:186)
MRUA detected an error at /u01/oracle/mrua_runs/MRUA_downloaded/ohome/mrua/mrua.pl line 243.
I am still troubleshooting. So if you have any ideas please let me know.
Thanks.
CV

Metadata Repository upgrade

Is it possible to upgrade Metadata Repository running on 9.0.1.5.0 database to 9.2.0.4.0 without installing new 9.2.0.4.0 database and running Metadata Repository Creation Assistant?

We have two different cases:
1- DB created using normal default Application Server Installation:
In this case, DB version can't be upgraded. When the infrasturcure will be upgraded, the DB will be upgraded automatically.
2- It is a Customer DB, Metadata repository is created using MRCA:
In this case, The DB is a normal DB and can be upgraded to any supported DB
version.
mmm.. some quick research on metalink shows even more steps with certain components. Please make sure you do a proper query on metalink before you start upgrading.
Message was edited by:
Jacco Landlust

10.1.4 Upgrade on an AMD Opteron 64bit metadata repository

Similar Messages

Maybe you are looking for