10.10.1 and screen mirroring

The latest update (10.10.1) has trouble with mirroring a MacBookAir 11" screen to Sony Bravia TV.
The Menu bar on the top is not visible and half of the Dock (When on the left) is off screen.
Everything worked fine until this update. Mirroring still works on my older MacBookPro with Mountain Lion

Similar problem. Apple LED Display 24" & MacBook Air early 2014, therefore thunderbolt to mini display port. I used to plug in cables, boot and screen appeared. Now I plug in cables, boot, nothing...open Air, login, cross fingers, close lid, progress bar appears in bottom left of Apple Display screen and, on a good day, desktop appears on the display. Only happens since 10.10.1. Anyone else?

Similar Messages

Video and sound slightly out of sync when screen mirroring

When I start screen mirroring and play a video, then my macbook screen matches perfectly with the sound output from my stereo, but my tv is slightly delayed compared to my macbook which makes the sound and video out of sync. it is something like 1/10th or 1/20th a second, but it is extremely annoying.
Anyone has the same problem or knows how to solve this?

What format were the original items ?
What frame rate are they in the original ?
What format are they on the AppleTV (H264 video AAC audio is the most common, but there are others) ?
What is the video frame rate now ?
Most out of syncs come from an imperfect attempt to encode for AppleTV. ie. DVD frame rate is 29.97fps. Many encode this to 30fps. So the movie plays 0.1% too fast, too little for you to notice, but at the end of a 100 minute film, the audio is 6 seconds out of sync with the video. Or 3 seconds on a 45 minute TV show.
Also check the source. I'd had DVDs (Alien Resurrection) jump 10 seconds out of sync in the middle of the movie. Back to the shop for that one.

When I connect my Air to my Samsung TV, I am able to see the screen mirrored on the tv for a split second before the tv turns to static. This pattern then cycles over and over. I can't get the image to stay on the tv screen. Any ideas?

When I connect my Air to my Samsung TV, I am able to see the screen mirrored on the tv for a split second before the tv turns to static. This pattern then cycles over and over. I can't get the image to stay on the tv screen. Any ideas?

Try:
- Going to NF support site/contacting them
- Try a different adopter
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Encore WT8 - screen Mirroring on TV does not work

Hello,
I have a KDL42-W653A television which supports screen mirroring over WiFi.
However, I cannot get it to work with the Toshiba Encore W8 tablet.
The tablet detects the television, I enter the number, but the television never shows the tablet's screen.
Both the television and the tablet are on the latest firmware.
Another thread indicates there is an update for HDMI in January. I hope that covers this too.
Anwar

Hi
> I have a KDL42-W653A television which supports screen mirroring over WiFi.
By mirroring over WiFi what technology you mean exactly?
Miracast, Intel WiDi, DisplayLink?
Toshiba Encore supports *Miracast*
To use Miracase both devices needs to support this technology.
Then you can connect to external display very easy:
Tab Settings -> Change PC settings -> PC and devices -> Devices
Here you have to Add a device and you tablet will start searching for a Miracast devices
After the connection has been established, the name of the Miracast device will appear under Projectors
Did you test the video output connecting the table to the TV with an micro-HDMI cable?
Does it work?
Here is also an nice youtube video about the Toshiba Encore WT8 screen output options
http://www.youtube.com/watch?v=kBmInOnrS2U

Screen Mirroring does not work, full of bugs.

Hi,
I've had a Sony Z1 for well over six months now and have got a Sony Bravia TV that supports mircast screen mirroring. When I purchased the Z1 it was on android 4.2 and the screen mirroring worked a treat, it was lag free, always responsive etc.
But when I upgraded to 4.3, the mirroring was buggy as **bleep**, the device always disconnected, when it did connect after several attempts it would lag, black out, then disconnect again. I've tried fiddling with wifi settings as well as wifi direct etc. but no joy and I left it as that.
When I knew 4.4 kitkat was coming to the z1 I waited as I would assume the issue would be fixed, but I upgraded to 4.4 (build: 14.3.A.0.757) today and is still full of these disconnecting and unresponsive bugs. I'm not sure what the problem is, I mirrored a samsung s4 mini and works absolutely fine (4.2) and I can mirror my sony xperia tablet z (4.3) with no issues either. I know a relative who also owns the z1 and has exactly the same issue, what also seems to happen now and then, is that half way through a mirrored session, the wifi would disable and will switch to the mobile network, then after some time, back to wifi again; yet this never happened on 4.2?
Is there a fix or a way to solve these issues? It's rather annoying having such a great feature that doesn't want to work on a flagship.
Thanks.

I had some issues with Miracast on my Z1 but with 4.2 and 4.3 firmware. It was loosing connection or kept saying that I don't have HDCP. I was connecting using Netgear Push2TV.
On 4.4 (.757) it works quite stable. On Z1C with 4.3 I wasn't able to miracast at all.
The same goes with screen mirroring to Z2 tablet. Works fine from Z1 to Z2 (both KitKat, altough one touch pairing is a disaster and not working at all), but you can forget about it using Z1C and Android 4.3.
Best regards,
Sergio PL
Xperia Z1 / Nexus 7 (2012)

AirPlay Screen Mirroring (Mavericks) disconnects frequently with "Feedback taking too long to send" message

My company has several TVs with AppleTVs (3rd generation units) connected in our conference rooms so we can "Screen Mirror" our Mac laptops via AirPlay during meetings. Many employees have complained that AirPlay Screen Mirroring drops frequently during meetings for no apparent reason.
In attempts to determine the cause of the issue, I removed the AppleTV units from Wi-Fi and hard-wired them all to the LAN (100Mbps/Full duplex, no switchport errors seen on the Cisco switch). I upgraded the AppleTVs to the latest firmware. I had our AppleTV users ensure they were running MacOS Mavericks with the latest software updates installed. I had the Mac laptops hard-wired into the LAN during meetings in the conference rooms. None of these changes resolved the AirPlay issue.
I reviewed the MacOS "/var/log/system.log" file from the laptops of several users that reported issues. I found a pattern that seemed to indicate that the "coreaudiod" process reported "Feedback taking too long to send" several times before the AppleTV connection was terminated. Also, from a network trace (using "tcpdump") taken during an unexpected AirPlay Screen Mirroring disconnection, I could see that the Mac laptop sent a TCP FIN packet to the AppleTV unit (this would indicate that the MacOS laptop initiated the closing of the AirPlay connection).
I have included the relevant log file entries below. Please note that the LAN internal to our company is "solid" and there have been no connectivity issues detected or reported during the times the AirPlay sessions were disconnected.
I believe I have found a workaround to this issue. By going into "System Preferences", "Sound" and then changing the "Output" device BACK to the "Internal Speakers" (rather than the AirPlay destination), the AirPlay Screen Monitoring connection seems to remain stable.
My questions are:
- is anyone else experiencing this type of problem? any other solutions recommended?
- is there a way to change the AirPlay defaults so that Screen Mirroring only sends the video (not audio)?
- does anyone know what the log file entries indicate (like, what does "Feedback taking too long to send...." mean)?
- any fix planned for this issue?
From: "/var/log/system.log":
Jan 16 10:50:16 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:16.454404 AM [AirPlay] ### Feedback taking too long to send (1 seconds, 1 total)
Jan 16 10:50:18 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:18.524517 AM [AirPlay] ### Feedback taking too long to send (4 seconds, 2 total)
Jan 16 10:50:20 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:20.533639 AM [AirPlay] ### Feedback taking too long to send (6 seconds, 3 total)
Jan 16 10:50:22 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:22.548168 AM [AirPlay] ### Feedback taking too long to send (8 seconds, 4 total)
Jan 16 10:50:24 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:24.554522 AM [AirPlay] ### Feedback taking too long to send (10 seconds, 5 total)
Jan 16 10:50:24 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:24.554809 AM [AirPlay] ### Report network status (3, en0) failed: 1/0x1 kCFHostErrorHostNotFound / kCFStreamErrorSOCKSSubDomainVersionCode / kCFStreamErrorSOCKS5BadResponseAddr / kCFStreamErrorDomainPOSIX / evtNotEnb / siInitSDTblErr / kUSBPending / dsBusError / kStatusIsError / kOTSerialSwOverRunErr / cdevResErr / EPERM
Jan 16 10:50:26 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:26.545531 AM [AirPlay] ### Feedback taking too long to send (12 seconds, 6 total)
Jan 16 10:50:28 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:28.559050 AM [AirPlay] ### Feedback taking too long to send (14 seconds, 7 total)
Jan 16 10:50:30 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:30.628868 AM [AirPlay] ### Feedback taking too long to send (16 seconds, 8 total)
Jan 16 10:50:32 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:32.655638 AM [AirPlay] ### Feedback taking too long to send (18 seconds, 9 total)
Jan 16 10:50:34 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:34.641952 AM [AirPlay] ### Feedback taking too long to send (20 seconds, 10 total)
Jan 16 10:50:36 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:36.659854 AM [AirPlay] ### Feedback taking too long to send (22 seconds, 11 total)
Jan 16 10:50:38 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:38.653594 AM [AirPlay] ### Feedback taking too long to send (24 seconds, 12 total)
Jan 16 10:50:40 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:40.659279 AM [AirPlay] ### Feedback taking too long to send (26 seconds, 13 total)
Jan 16 10:50:42 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:42.745549 AM [AirPlay] ### Feedback taking too long to send (28 seconds, 14 total)
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.532853 AM [AirPlay] ### Endpoint "AppleTV" feedback error: -6722/0xFFFFE5BE kTimeoutErr
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533151 AM [AirPlay] ### Feedback failed: -6722/0xFFFFE5BE kTimeoutErr
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533273 AM [AirPlay] ### Error with endpoint "AppleTV": -6722/0xFFFFE5BE kTimeoutErr
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533427 AM [BonjourBrowser] Reconfirming PTR for AppleTV._airplay._tcp.local. on en0
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533588 AM [BonjourBrowser] Reconfirming PTR for 9C207BBD8EA1@AppleTV._raop._tcp.local. on en0
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533839 AM [AirPlay] ### AirPlay report: Network dead for 10+ seconds after 159 seconds, screen, nm "AppleTV", tp WiFi, md AppleTV3,1, sv 190.9, rt 0, fu 0, rssi -54
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.534104 AM [AirPlay] ### Report network status (5, en0) failed: 1/0x1 kCFHostErrorHostNotFound / kCFStreamErrorSOCKSSubDomainVersionCode / kCFStreamErrorSOCKS5BadResponseAddr / kCFStreamErrorDomainPOSIX / evtNotEnb / siInitSDTblErr / kUSBPending / dsBusError / kStatusIsError / kOTSerialSwOverRunErr / cdevResErr / EPERM
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.534315 AM [AirPlay] Deactivating virtual display stream for quiesce
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.543682 AM [AirPlayScreenClient] Stopping session
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.543815 AM [AirPlay] Quiescing endpoint 'AppleTV'
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.543907 AM [AirPlayScreenClient] Stopping session internal
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.544218 AM [AirPlayScreenClient] Stopped session internal
Jan 16 10:50:44 My-MacBook-Pro.local AirPlayUIAgent[985]: 2014-01-16 10:50:44.544266 AM [AirPlayAVSys] ### Quiesce AirPlay
Jan 16 10:50:44 My-MacBook-Pro.local SystemUIServer[159]: 2014-01-16 10:50:44.544297 AM [AirPlayAVSys] ### Quiesce AirPlay
Jan 16 10:50:44 My-MacBook-Pro.local SystemUIServer[159]: 2014-01-16 10:50:44.553084 AM [AirPlayAVSys] ### Quiesce AirPlay
Jan 16 10:50:44 My-MacBook-Pro.local AirPlayUIAgent[985]: 2014-01-16 10:50:44.554904 AM [AirPlayAVSys] ### Quiesce AirPlay
Jan 16 10:50:44 My-MacBook-Pro.local SystemUIServer[159]: 2014-01-16 10:50:44.557604 AM [AirPlayAVSys] Ignoring route away when AirPlay not current
Jan 16 10:50:44 My-MacBook-Pro.local AirPlayUIAgent[985]: 2014-01-16 10:50:44.560307 AM [AirPlayAVSys] Ignoring route away when AirPlay not current
Jan 16 10:50:44 My-MacBook-Pro.local WindowServer[89]: Display 0x04280880: GL mask 0x21; bounds (0, 0)[1920 x 1080], 62 modes available
Jan 16 10:50:44 My-MacBook-Pro.local WindowServer[89]: GLCompositor: GL renderer id 0x01022727, GL mask 0x0000001f, accelerator 0x00004ccb, unit 0, caps QEX|MIPMAP, vram 2048 MB
I am happy to provide more information if needed.
Thank you.
-Tim

I'm currently still experiencing this as well. I've confirmed it occurs on 10.9.1, 10.9.2, and 10.9.3 on MacBook Pro Retina's, Mid-2012 and 2013 MacBooks. It happens on multiple ATV's not just one, all are updated to 6.1.1 and a simple reboot seems to fix it temporarily but it does come back. All the ATV's are connecting to the network via Wireless not Ethernet. These are 3rd Gen ATV's but I checked the serial number and these do not match the bad batch of Apple TV's from 2013 that were offered up for Replacement for Apple due to the bad firmware update. None of the computers have the Firewall turned on. Here's the two logs that we always find after the issue occurs (logs are recent, happened this morning):
5/30/14 8:57:36.017 AM coreaudiod[183]: 2014-05-30 08:57:36.016946 AM [AirPlay] ### Feedback taking too long to send (30 seconds, 17 total)
5/30/14 8:57:36.332 AM coreaudiod[183]: 2014-05-30 08:57:36.331492 AM [AirPlay] ### Feedback failed: -6723/0xFFFFE5BD kCanceledErr
The user will get disconnected from Airplay anywhere between 30 seconds to 3 minutes after logging on and can reconnect but then once again get disconnected after the same time period. One interesting thing to note is that when the Feedback Taking Too Long to send error starts occuring and the countdown to disconnect start ticking down to 30, its solely referring to Audio not being sent over the network and Video is working just fine. If I try to play sound I get another log and the sound doesn't play through the speakers. After a reboot, sound works fine and the Feedback Error's do not show up. I've also tried switching to Internal Speakers (since it defaultly switches to Airplay Speakers) after connecting to Airplay and seeing the Feedback timer start in the Console Logs but even after that the log continues to saw its taking too long to send and disconnects in 30 seconds.
This issue has been ongoing for months, I've got a ticket logged as far back as January with this occuring but its infrequent enough that we've just restarted and moved on. I'd say its an issue that occurs to about 5%-10% of meetings but that's an entire meeting that doesn't have the ability to Airplay until someone comes down and reboots it.
I don't often post in this forum but its still an active issue with no resolution, proof that its occuring on other people's systems, and no firmware updates having been released to correct it. It'd be nice to know of any workarounds other than having to buy some lamp timers for each conference room just to get a functional ATV or putting up a sign that says hey if you get disconnected every 3 minutes, reboot the ATV. The whole reason we're using Apple products is for ease of use otherwise I'd put together a much cheaper solution myself. Any help or recommended troubleshooting steps would be fantastic at this point.

Apple TV Screen Mirroring API

Hi,
Is there any way to get Apple TV Screen Mirroring API, so it can be used from application?
I search over apple forums and haven't found any documentations.
Thank you in advance,
Dmitry

Is your application on OS X or iOS? You can find good information in the AirPlay documentation. Sample iOS Links:
AirPlay Overview
https://developer.apple.com/library/ios/#documentation/AudioVideo/Conceptual/Air PlayGuide/Introduction/Introduction.html
Multiple Display Programming Guide for iOS
http://developer.apple.com/library/ios/#documentation/WindowsViews/Conceptual/Wi ndowAndScreenGuide/UsingExternalDisplay/UsingExternalDisplay.html#//apple_ref/do c/uid/TP40012555-CH3-SW1

Foam sheet between keyboard and screen, Replacement?

Hi,
I'm wondering if anybody knows if this has a part number ? and where can
I get one ?
I'm wanting to know if I can get a factory replacement of the thin foam sheet
that is part of the packing materials that goes between the keyboard and screen.
You know, when your Powerbook was new, when you opened the lid
for the first time, there was that thin foam sheet over the keyboard, speakers,
trackpad the whole surface area. I guess it's more like the foam is the size of
the whole screen area, to protect the screen.
This may seem silly to want to replace this, but I have a PowerBook that's coming
up on 3 years old and every time I have closed the lid (screen) I have put the thin
foam in to protect the screen. So, the screen is perfect after 3 years.
Much different than my co-workers PowerBooks. They didn't see any
need for this foam and didn't use it and their screens are etched / scratched from
the keys, mirror images of the keys scratched into their screens.

Hi there,
I'm not sure if Apple assigns part numbers for their packing materials, but you could either visit your local Apple store to see if they happen to have any of these lying around, or you could purchase a screen protector to do the job.
I used the foam sheet for a few years, but lost it recently, so I went out and bought an iKlear Cleaning kit which included a polish cloth which is the size of the keyboard and trackpad area, and I find it does a fine job of protecting the screen.
Go to klearscreen.com and have a look.

Xz1 screen mirroring -no sound

hello.
I have xperia z1 firmware 14.2.a.1.136.
the problem is- no sound when combined screen mirroring (no problem with image-I can see phone screen in TV)
I tried to reset the phone to factory settings / repair by PCC-Repair Phone;
TV-samsung UE55F8000SLXXH with the latest firmware 1115.
TV was also reset to factory settings;
image is transferred but no sound.
how to solve the problem?
regards
K

bump.
now I have kitkat firmware (i did full hard reset -again).
the problem still occurs.
I tried to connect samsung galaxy s4 -no problem with screen mirroring - picture and sound work!
sony, help please
regards

Black screen mirroring after ATV update

hi, I need help, I just bought my ATV, and it mirrored my IPad just fine, then it asked me to update the ATV software, now it just give me sound but no mirror??? Only a black screen. Help please!

I have the same problem. After restarting the iPad, mirroring will work for 2 or 3 times and then after that I get a black screen on the TV.
It is not a router issue because my iPhone and MCP all work fine sending to ATV repeatedly. It's just the iPad that is having this issue, the one place I really need the capability.
I've tried everything suggested on other threads with this topic. The only thing that works is rebooting the iPad, but the problem crops up after 2-3 uses. I really need to be able to turn mirroring on/off repeatedly like I can on other devices.

Airplay icon doesnt show/screen mirroring option absent in display pref

Hello all,
I have searched every where I can and cannot seem to resolve my issue.
I have an Early -2011 17" MBP and a new Apple TV.
Everything on Apple website/support page tells me that my MBP SHOULD be able to use Airplay but I cannot get the Airplay icopn to show up on the top bar.
The Apple TV is working fine with my IPAD 2 and 2 Iphone 5s.
I have also checked the "display" properties under "system pref" and the option to check/uncheck "screen mirroring" isn't there.
Apple store person confirmed via Apple website/support communities that my Early 2011 17" MBP running 10.7.5 does/can use Airplay.
Can someone help me?
What am I missing here?
Thank you all in advance for your help

It is your OS, you need OSX 10.8 Mountain Lion or newer to mirror.

Airplay screen mirroring on 4:3 projector, resolution problems.

Hi!
I have an iPad 3, an ATV3 and a NEC NP400 projector which I'm trying to get to work together. I'm not sure about the projectors resolution, but i know it has a 4:3 aspect ratio.
I've tried to use screen mirroring with both the ATV 3 and a VGA adapter, and the problem is that I get black bars on each side no matter which method I use. I understand that the iPad 3 has a 4:3 aspect ratio and that black bars would appear with a 16:9 screen, but not on a 4:3 screen which is the ipads native aspect ratio.
It feels as if the iPad by defalut assumes that I'm having a 16:9 projector and adjust the aspect ratio to that fact. Is there anyway to tell the iPad that i'm having a 4:3 projector? Or should it detect that automatically?
The ATV fills the whole screen without black bars on each side, but as soon as I'm turning screen mirroring on via airplay the aspect ratio changes. There is no difference if I'm using the ATV or the VGA adapter.
How does these things work, and is there a solution?`
Thanks!

Hi!
I have an iPad 3, an ATV3 and a NEC NP400 projector which I'm trying to get to work together. I'm not sure about the projectors resolution, but i know it has a 4:3 aspect ratio.
I've tried to use screen mirroring with both the ATV 3 and a VGA adapter, and the problem is that I get black bars on each side no matter which method I use. I understand that the iPad 3 has a 4:3 aspect ratio and that black bars would appear with a 16:9 screen, but not on a 4:3 screen which is the ipads native aspect ratio.
It feels as if the iPad by defalut assumes that I'm having a 16:9 projector and adjust the aspect ratio to that fact. Is there anyway to tell the iPad that i'm having a 4:3 projector? Or should it detect that automatically?
The ATV fills the whole screen without black bars on each side, but as soon as I'm turning screen mirroring on via airplay the aspect ratio changes. There is no difference if I'm using the ATV or the VGA adapter.
How does these things work, and is there a solution?`
Thanks!

I have MAC OS X 10.6.8 (up-to-date). How can I get screen mirroring to my Apple TV to work? The icon does not appear at top status bar..

I have MAC OS X 10.6.8 (up-to-date). How can I get screen mirroring to my Apple TV to work? The icon does not appear at top status bar..

Welcome to the Apple Support Communities
See > http://support.apple.com/kb/HT5404 AirPlay Mirroring is compatible with Mid 2011 and newer MacBooks Air, and OS X Mountain Lion.
As you have Mac OS X Snow Leopard, you haven't got a compatible MacBook Air, so you can't use AirPlay Mirroring. However, you can use a third-party app as AirParrot to mirror the MacBook onto your Apple TV > http://www.airparrot.com

Can I screen mirror on a Macbook Air version 10.10.3?

I've just bought a Macbook air running OS X Yosemite and i have been told that they can screen mirror without any wires or apple tv, but I don't have a clue how to get it going.
please help

Sure, here's the solution:
The "Share" button was introduced with Mountain Lion! You should buy the Mountain Lion upgrade if your MacBook Air can handle it.
Here are the requirements:
System requirements for OS X Mountain Lion

Chromecast Screen Mirroring

Hi,
Google released and unlocked the native screen mirroring via Chromecast. Why is SONY the only BRAND that is not listed in supported devices ? Can't be that hard to do...I buy a Flagship Device and get a knock into my face for it...Please get in contact with google to add the Z2 to the list of the supported devices ASAP!
greetings.

Download an app called Allcast. Works great but you have to pay about £3? after the initial trial.
Great for watching movies from Showbox

10.10.1 and screen mirroring

Similar Messages

Maybe you are looking for