10.10.3 Post Upgrade - Spotlight missing !
Hi, I have just upgraded my late 2012 27" iMac to 10.10.3 and Spotlight has disappeared from the tool dock thing at the top right and [Command] [Space] no longer works... Finder still has a search box, which works.. am I alone ? Anyone else had this problem.
Any help appreciated.
Thanks
Ian
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.
Similar Messages
-
Required Post Upgrade Jobs: Missing jobs and failures
Folks,
In reviewing "Required Post Upgrade Jobs", I found that "Compile Non-Compiled Flexfields" failed. The job was submitted by APPSMGR and immediately started since the Request Process queues were not initially deactivated as reccomended in doc 399362.1. I'm afraid I don't know the password for APPSMGR. Is there a way for me to restart this job so that any successors release?
Only a handful of the required jobs show to have been submitted and run. Would required jobs that have not run and do not appear in the queue need to be manually submitted?
Thanks for any help.All of my post upgrade processes completed without error except the flexfield compile of AR_ADJUSTMENTS_ALL_DFV. It will not compile from within the forms either:
Oracle error 911: ORA-00911: invalid character
ORA-06512: at "SYSTEM.AD_DDL", line 165
ORA-06512: at line 1 has been detected in afuddl() [3_xdd].
do_ddl(APPLSYS, AR, 2, $statement$, AR_ADJUSTMENTS_ALL_DFV): private_do_ddl(APPS, APPLSYS, AR, 2, $statement$, AR_ADJUSTMENTS_ALL_DFV): do_cd_view(1, APPS, 2, AR_ADJUSTMENTS_ALL_DFV, $statement$): : do_apps_ddl(APPS, $statement$): : substr($statement$,1,255)='CREATE OR REPLACE VIEW AR_ADJUSTMENTS_ALL_DFV
(ROW_ID, "CONTEXT_VALUE", AdjustmentStatus,
CONCATENATED_SEGMENTS)
AS SELECT ROWID, ATTRIBUTE_CATEGORY, ATTRIBUTE4,
ATTRIBUTE4
FROM AR_ADJUSTMENTS_ALL'
View Name: AR_ADJUSTMENTS_ALL_DFV
I am going to apply 5484000 Oracle E-Business Suite 12.0.2 Release Update Pack (RUP2) tonight and see if it makes any difference. -
ASU-process POST Upgrade Step on SQL database
Hi All,
To check this message in the right format kindly click on reply first then click on quote original icon ("").
I am performing an upgrade from R/3 4.7 to ERP 6.0 SR3, while doing upgrade sapup asking me To perform the manual application specific post upgrade step.
This phase says to run ASU toolbox by using tx /n/asu/upgrade. when i run this tx is show the below list of steps to be performed with showing severity level of some as optional and many as obligatory.
Task List Severity SAP R/3 release frm SAP R/3 release to
IS-OIL Application Test 600 Optional
KP06xx: Termination SYNTAX_ERROR Obligatory 470 500
CGPL: Entries are blank after upgrade Obligatory
Error handling of task group execution Optional
Mobile device cannot confirm TO after release upgrade Obligatory 470 600
Mobile device doesn't find transfer orders after upgrade Obligatory 470 600
Grantee Management - Upgrade from EA-PS 2.00 to ECC 600 Obligatory
Convert customizing for warehouse funds ctr scenarios Optional
Various problems classification commitment items (class type Obligatory
Unauthorized error messages udring fiscal year change/reassi Obligatory
RFFMUDX1 migrates incomplete budgeting tables Obligatory
Non-7bit-ASCII character used for BCS key figures Obligatory
Changes in TKEDR for /ISDFPS/RFFMDISTDERIVALE Obligatory
BCS - Tool for Deleting Obsolete Derivation Strategies Obligatory
BCS Syntax Error on Upgrade from EA-PS 2.00 to ECC 600 Obligatory
Migration to ERP 6.0 (EA-PS 6.00) Obligatory
Migration EA-PS 2.00 to ERP 5.0 (EA-PS 5.00) Obligatory
Missing initialization of new fields in table ANLZ Obligatory 46C 470
Activating VMC for the Internet Pricing and Configurator Obligatory
Customer specific BSEG-fields not transferred Optional
Conversion of report headers in drilldown-reporting Optional 600
IBase: Upgrade to Release 4.6C and higher Optional 46C 600
ZSAPRCKML_COGS: Upgrade to release 4.7 or higher Optional 46C 470
Conversion of CO-Total-Tables Obligatory 46C 500
Conversion of CO-line-item table COEP Obligatory 46C 600
New General Ledger, problems in CO-documents Obligatory 500
No receivers found in allocations Obligatory 46C 470
Conversion Of New Process Parameter Long Texts For Search Optional 110 600
Migration of process parameters in recipe management Optional 110 600
FAQ new depreciation calculation Optional 600
Upgrading to SAP R/3 47x200 and SAP ECC 500 with RMGMT Obligatory 100 500
Reloading Table T512W Optional
Converting Short Texts Obligatory
Migrating Data Optional 4.7
Activating SAP ECC Extensions Optional
I am not sure about which steps I have to perform, I am a bit confused.. because some are optional and some are not relevant to my release (as target or source release is different from mine). and also few things are not applied in my envirnoment hence those steps are also not relevant.
Please suggest me, how to proceed and what to do. please guide if i skip this step now and later on I apply latest SP than still I need to do all this.
Regards
VinayHi All,
I also faced a similar issue during upgrade. Some useful findings.
1. Only super user can access this /n/ASU/START
2. All the obligatory executable tasks are automatically performed by the system automatically during upgrade. SAPADM. Only errors (if any) are to be corrected.
3. Some of the tasks are only to go through some SAP notes as a precaution before upgrade.
4. Execute all the checks /n/ASU/UPGRADE
5. This surely can be skipped, but not advisable.
regards,
Amit -
Upgrade step ASU-process post upgrade step
Hi All,
To check this message in the right format kindly click on reply first then click on quote original icon ("").
I am performing an upgrade from R/3 4.7 to ERP 6.0 SR3, while doing upgrade sapup asking me To perform the manual application specific post upgrade step.
This phase says to run ASU toolbox by using tx /n/asu/upgrade. when i run this tx is show the below list of steps to be performed with showing severity level of some as optional and many as obligatory.
Task List Severity SAP R/3 release frm SAP R/3 release to
IS-OIL Application Test 600 Optional
KP06xx: Termination SYNTAX_ERROR Obligatory 470 500
CGPL: Entries are blank after upgrade Obligatory
Error handling of task group execution Optional
Mobile device cannot confirm TO after release upgrade Obligatory 470 600
Mobile device doesn't find transfer orders after upgrade Obligatory 470 600
Grantee Management - Upgrade from EA-PS 2.00 to ECC 600 Obligatory
Convert customizing for warehouse funds ctr scenarios Optional
Various problems classification commitment items (class type Obligatory
Unauthorized error messages udring fiscal year change/reassi Obligatory
RFFMUDX1 migrates incomplete budgeting tables Obligatory
Non-7bit-ASCII character used for BCS key figures Obligatory
Changes in TKEDR for /ISDFPS/RFFMDISTDERIVALE Obligatory
BCS - Tool for Deleting Obsolete Derivation Strategies Obligatory
BCS Syntax Error on Upgrade from EA-PS 2.00 to ECC 600 Obligatory
Migration to ERP 6.0 (EA-PS 6.00) Obligatory
Migration EA-PS 2.00 to ERP 5.0 (EA-PS 5.00) Obligatory
Missing initialization of new fields in table ANLZ Obligatory 46C 470
Activating VMC for the Internet Pricing and Configurator Obligatory
Customer specific BSEG-fields not transferred Optional
Conversion of report headers in drilldown-reporting Optional 600
IBase: Upgrade to Release 4.6C and higher Optional 46C 600
ZSAPRCKML_COGS: Upgrade to release 4.7 or higher Optional 46C 470
Conversion of CO-Total-Tables Obligatory 46C 500
Conversion of CO-line-item table COEP Obligatory 46C 600
New General Ledger, problems in CO-documents Obligatory 500
No receivers found in allocations Obligatory 46C 470
Conversion Of New Process Parameter Long Texts For Search Optional 110 600
Migration of process parameters in recipe management Optional 110 600
FAQ new depreciation calculation Optional 600
Upgrading to SAP R/3 47x200 and SAP ECC 500 with RMGMT Obligatory 100 500
Reloading Table T512W Optional
Converting Short Texts Obligatory
Migrating Data Optional 4.7
Activating SAP ECC Extensions Optional
I am not sure about which steps I have to perform, I am a bit confused.. because some are optional and some are not relevant to my release (as target or source release is different from mine). and also few things are not applied in my envirnoment hence those steps are also not relevant.
Please suggest me, how to proceed and what to do. please guide if i skip this step now and later on I apply latest SP than still I need to do all this.
Regards
Vinay
Edited by: Vinay Paul on Sep 11, 2009 10:11 PMHi All,
I also faced a similar issue during upgrade. Some useful findings.
1. Only super user can access this /n/ASU/START
2. All the obligatory executable tasks are automatically performed by the system automatically during upgrade. SAPADM. Only errors (if any) are to be corrected.
3. Some of the tasks are only to go through some SAP notes as a precaution before upgrade.
4. Execute all the checks /n/ASU/UPGRADE
5. This surely can be skipped, but not advisable.
regards,
Amit -
Spotlight missing files and folders?
Spotlight consistently misses certain files and entire folders, which I can find by rummaging through my finder, but can't find by searching in Spotlight. No these are not hidden files or library folders. Yes I have checked my privacy settings and used the privacy options to re-index spotlight. Why would Spotlight miss certain folders? Does it only search to a certain depth? How can I get Spotlight to search these folders?
Step 1
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -F '$Time $Message' -k Sender mdworker -o -k Message Rne Norm -k Sender mds | tail | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there.
If any personal information appears in the output, anonymize before posting, but don’t remove the context.
Step 2
Enter the following command as in Step 1 and post the output:
mdutil -as 2>&- | pbcopy
You can then quit Terminal.
Step 3
Launch the Console application in the same way you launched Terminal. In the Console window, look under the heading DIAGNOSTIC AND USAGE INFORMATION on the left for crash reports related to Spotlight. If you don't see that heading, select
View ▹ Show Log List
from the menu bar. A Spotlight crash report has a name beginning in "mds" or "mdworker" and ending in ".crash". Select the most recent such report, if any, from the System and User subcategories and post the entire contents—the text, please, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post any other kind of diagnostic report, such as hang logs—they're very long and not helpful. -
Hi,
We are upgrading our test instance from 12.0.6 10gR2 database to 12.1.3 .
We have currently upgraded our system to 12.1.1 from 12.0.6 post upgrade when we started our application
Concurrent manager wont come up Also Concurrent manager--> administer form shows error,
Concurrent manager log file shows following error :Cause: afpdlrq failed due to ORA-04063: package body "APPS.FND_DCP" has errors
ORA-06508: PL/SQL: could not find program unit being called: "APPS.FND_DCP"
ORA-06512: at line 1.
When checked we found that the package body is missing while we only have package that is "Valid"
Kindly please provide your inputs as this is extremely necessary for us.
Regards,
Milan.Concurrent manager log file shows following error :Cause: afpdlrq failed due to ORA-04063: package body "APPS.FND_DCP" has errors
ORA-06508: PL/SQL: could not find program unit being called: "APPS.FND_DCP"
ORA-06512: at line 1.
When checked we found that the package body is missing while we only have package that is "Valid"
Kindly please provide your inputs as this is extremely necessary for us.Please see (R12: "ORA-06508: PL/SQL: could not find program unit being called: APPS.FND_DCP" Error When Attempting to Start Concurrent Manager After R12.1.3 Upgrade [ID 1329643.1]).
You may also see (ORA-04061 Internal Concurrent Manager Going Down [ID 1068908.1]).
Thanks,
Hussein -
EJB references post upgrade from 8.1 to 10.3
Hi,
I have an application.xml file in META-INF directory of the EAR file. It has the below reference:
<module>
<ejb>content.jar</ejb>
</module>
<module>
<ejb>content_repo.jar</ejb>
</module>
<module>
<ejb>netuix.jar</ejb>
</module>
<module>
<ejb>p13n_ejb.jar</ejb>
</module>
<module>
<ejb>prefs.jar</ejb>
</module>
<module>
<ejb>wps.jar</ejb>
</module>
Post upgrade I accidentally packaged an EAR without above references in application.xml and without actual jars in the EAR file. The application seemed to be running fine, did not test it completely though. Do we really need these jar files? I had upgraded this application from 8.1 to 10.3 using upgrade tool in workshop. This is a portal based web application. Also, what is the purpose of these libraries? Could these be automatically added by the upgrade tool to the weblogic.xml.Hi Srini,
it supports but you need to upgrade correctly.
follow this link
Beehive Applications
after upgrade if you found some error like classnotfound error.
If those are the errors you were also experiencing, then please follow one of these options to resolve this issue:OPTION
1:Identify all the JARs that contain the beehive classes and explicitly add the jar files to the classpathOPTION
2:When you created the domain (if you used the Config Wizard), do you make it a "Workshop" domain? If not, try that.That should deploy the Workshop framework (Beehive controls, NETUI, etc) libraries as shared libraries. Then these libraries should be referenced in your applications weblogic.xml and weblogic-application.xml.
regards,
Kal -
HI All,
We have recently done the Upgrade from BW 3.1 to BI 7.0
There is a issue regarding the POST Upgrade
One Job is failing every day
The name of the JOB is BI_WRITE_PROT_TO_APPLLOG
And the Job log is
06/18/2008 00:04:55 Job started 00 516 S
06/18/2008 00:04:55 Logon of user PALAPSJ in client 200 failed when starting a step 00 560 A
06/18/2008 00:04:55 Job cancelled
00 518 A
This Job is actually running the program
RSBATCH_WRITE_PROT_TO_APPLLOG
when i try to run this program with my user id its working
but with the other user id which it is schedule its failing giving the messages as mentioned in the job log
Kindly suggest me
REgards
janardhan KMaybe it's a dialog and no system or background user. so the job fails.
Regards,
Juergen -
Post-upgrade tasks for OWB 10g Release 2
Hi,
we're planning to upgrade from OWB 10.1.0.2 to 10.2.x.
Now, I'm trying to get a clear view on what will be the "post-upgrade" tasks, in terms of manual adaptations, corrections, etc. to get everything back up and running after the upgrade ...
E.g. : by means of test al already exported a dimension, and imported it in the 10.2 repository ... Turned out that in the pre-10.2 version, there were no validation problems, but as from 10.2 (although the upgrade and import were successful), I got 19 warnings and 2 errors ... because each level needs to have a business or surrogate key ...
It' s things like that I'm especially interested in, in order to determine the workload after the upgrade ...
So, feel free to share your experiences ; I'm looking forward to read them!
Thanks!
Grtz.Here are some from my list. I stopped maintaining it a while ago, we have lots more where this came from. Some of it also apply to older versions of OWB.
Key lookup You are to choose input and output attributes BEFORE being able to choose loookup table, all in a time consuming wizard
Expressions Copy and paste into expression editor, validation fails for expressions using lowercase (such as "upper" or "substr")
Renaming attributes Not possible anymore, you need to open details
Adding a table component You must browse in a tree structure (time consuming), not search functionality anymore
Import Import converting from 9.2 hangs after 15% in about 10% of all imports
Import Some mappings are not possible to import, a total rewrite is necessary
Deployment You can only deploy about 5-10 times before you need to restart OWB
Memory leak If something goes wrong in OWB, memory is never cleared - JAWAW.exe needs to be removed manually from memory
Import Importing mappings one by one (as this is sometimes needed due to OWB), the last directory used is OF COURSE not default when importing the next time
OWB GUI / mapping editor When working with components in the mapping editor, an object hidden behind the object you are actually working with is selected prior to the object in visual focus to the user
BUG! Urgent: CASE - wrong generated Code
ANSI JOINS Remove ANSI-SQL from mapping configuration, otherwise (+) outer joins will not work
Transformations Not possible to enter a transformation such as "sysdate", you must find it in a huge tree structure list (no search available) -
Upgraded my iTunes to the latest version and upgraded my iPhone 3gs to IOS5. Unable to sync my iPhone with iTunes after upgrade and is getting stuck on Step1. I am running my iTunes on Windows Vista PC and have tried the solution of netsh winsock reset and still no luck.
Also, I am not able to see any of my music on the phone post upgrade, but it shows on iTunes. Again not sure on how to make it appear on my phone. Any help would be much appreciated!!
Cheers,
Kishoremy advice to you is to SWITCH TO SOMETHING BESIDES "VISTA"!!!!!!!!!!!!!
-
Audio Tracks on my iPhone stopped working post upgraded to iOS 5.
Audio Tracks on my iPhone stopped working post upgraded to iOS 5.
Quiet a lot of my tracks do not play on my iPhone 4 after I upgraded to iOS 5. The the seeker bar does not progress and it looks stuck.
Could someone please help.
Regards,
S!dHi !
I am currently having the same problem, since I upgraded my iPhone 4 to iOS 5, many tracks don't work. They were working before. Some are working but half isn't.
Tried to restore, remake playlist, delete every tracks et put them back. Same prob.
Please help !
Regards,
Rom -
12.1.1 POST-upgrade ---verify concurrent process
I have upgraded 11.5.10.to 12.1.1 successfully when I was running post upgrade
Oracle® Applications
Upgrade Guide
Release 11i to 12.1.1
Part No. E14010-01
chapter 4
Step 1: Verify completion of concurrent programs (recommended)
The upgrade process creates numerous concurrent program requests. Once you bring
up the application tier, these programs run automatically to complete tasks such as data
cleanup and upgrades to historical data, among others. You can run these programs in
the background, while your system is up and running and users are active, unless
otherwise instructed in the product-specific sections of this book.
Before you continue, be sure all the concurrent programs generated by the upgrade
have run successfully. In the Required Post Upgrade Jobs section of E-Business Suite
Release 12 Upgrade Sizing and Best Practices (Doc ID: 399362.1), you will find a list of the
distinct concurrent programs included in the upgrade process. The Best Practices
section includes a recommendation on how to isolate these programs (and all their
executions) into a separate concurrent manager queue, which you can use for
processing.
post upgrade concurrent request were around 989 but
by mistake I stopped the concurrent manager and I ran cmclean.sql --:(
then after some time I shut abort the database
please tell me what should I do now
what impact will cmclean and shut abort will have ?
how do i know which request are clean by cmclean
and how can I ran them again??
Immediate reply is appreciated
AppsmastI
SHaring Is CArinGpost upgrade concurrent request were around 989 but
by mistake I stopped the concurrent manager and I ran cmclean.sql --:(
then after some time I shut abort the database
please tell me what should I do now In the Required Post Upgrade Jobs section of E-Business Suite Release 12 Upgrade Sizing and Best Practices (Doc ID: 399362.1), you will find a list of the distinct concurrent programs included in the upgrade process.
what impact will cmclean and shut abort will have ?cmclean.sql script should not have any impact on the concurrent programs, however shutdown abort will do the following http://docs.oracle.com/cd/E11882_01/server.112/e10595/start003.htm#i1006611
how do i know which request are clean by cmclean In the same session you will find the list of table that are updated by cmclean.sql script along with the request ids.
and how can I ran them again??See the doc referenced above.
Thanks,
Hussein -
SLA Pre- upgrade programs and process and SLA Post upgrade
Hi Guys
Can anybody please let me know what are the SLA Pre- upgrade programs and process we have to run and SLA Post upgrade process and programs.
Thanks
AjeeshPl post details of OS and EBS versions. Pl see if MOS Doc 604893.1 (R12: FAQ for the SLA Upgrade: SLA Pre-Upgrade, Post-Upgrade, and Hot Patch) can help
HTH
Srini -
Error on Oracle 11gR2 RAC database Post upgrade step
[Upgrade the Oracle Clusterware Configuration|http://docs.oracle.com/cd/E11882_01/server.112/e23633/afterup.htm] Problem Description:
O.S Version: HP-UX B.11.31 U ia64
It is upgrading of Oracle RAC 2 node database from 11.1.0.7.0 to 11.2.0.3.0
I receive following error while perfoming the post upgrade step
indba1 racdb> srvctl upgrade database -d racdb -o /app/oracle/product/11.2.0.3/db
PRCD-1231 : Failed to upgrade configuration of database racdb to version 11.2.0.3.0 in new Oracle home /app/oracle/product/11.2.0.3/db
PRKC-1136 : Unable to find version for database with name racdb
Actually I am performing the step "Upgrade the Oracle Clusterware Configuration" whill getting the error.
When I tried on below;
indba1 racdbp> srvctl upgrade database -d racdb -o /app/oracle/product/11.2.0.3/db
PRCD-1231 : Failed to upgrade configuration of database racdb to version 11.2.0.3.0 in new Oracle home /app/oracle/product/11.2.0.3/db
PRKC-1136 : Unable to find version for database with name racdbOutput from Oracle 11.1.0.7 Home:
oracle@indba1:/app/oracle/product/11g/db_1 $ srvctl config database -d racdb
PRKR-1001 : cluster database racdb does not exist
PRKO-2005 : Application error: Failure in getting Cluster Database Configuration for: racdb
Output from Oracle 11.2.0.3 Home:
oracle@usfsdba1:/app/oracle/product/11.2.0.3/db $ srvctl config database -d racdb
PRKR-1001 : cluster database racdb does not exist
PRKO-2005 : Application error: Failure in getting Cluster Database Configuration for: racdb -
Upgrading Oracle Text - Post upgrade step 10.2 to 11.2
I already upgraded my 10.2.0.4 database to 11.2.0.1 and have to do post upgrade steps. In step 39 of Manual guideline (837570.1) is not clear for me. If some one can explain further would be appriciated. When i check my source ORACLE_HOME/ctx/admin/ctxf102.txt or ctxf102.sql
Step 39
Upgrading Oracle Text
Copy the following files from the previous Oracle home to the new Oracle home:
* Stemming user-dictionary files
* User-modified KOREAN_MORPH_LEXER dictionary files
* USER_FILTER executables
To obtain a list of the above files, use:
$ORACLE_HOME/ctx/admin/ctxf<version>.txt
$ORACLE_HOME/ctx/admin/ctxf<version>.sql
where version is 920,101,102
For instance, if upgrading from 10.2.0
*1. For dictionary files check*
*$ORACLE_HOME/ctx/admin/ctxf102.txt*
*2. Execute the script as database user SYS,SYSTEM, or CTXSYS*
*$ORACLE_HOME/ctx/admin/ctxf102.sql*
If your Oracle Text index uses KOREAN_LEXER which was deprecated in Oracle 9i and desupported in Oracle 10g Release 2, see below Note for further information on manual migration from KOREAN_LEXER to KOREAN_MORPH_LEXER.
Note 300172.1 Obsolescence of KOREAN_LEXER Lexer TypeHi Srini
Thank you very much. now i got it.
Oracle asked me to identify the CTXCAT indexes with KOREAN_LEXER execute the following query as user CTXSYS: if nothing return then i can skip this step.
SELECT idx_name
FROM ctxsys.ctx_indexes
WHERE idx_type = 'CTXCAT'
AND idx_name IN
(SELECT ixo_index_name
FROM ctxsys.ctx_index_objects
WHERE ixo_class = 'LEXER'
AND ixo_object = 'KOREAN_MORPH_LEXER ');
SELECT isl_index_owner,isl_index_name,isl_language
FROM CTXSYS.ctx_index_sub_lexers
WHERE isl_object = 'KOREAN_MORPH_LEXER';
Maybe you are looking for
-
How do I find and delete thes songs from my ipod?
-
I haved moved after 38 years in the same place. I have changed e-mail addresses and cannot seem to get Apple to leave my OLD address alone. In trying to fix this, I have changed my password several times, and am now having a really bad time even gett
-
Changing the root file system device to another device.
Hi all, I have my arch root file system on /dev/sda1 ext4 and /home on /dev/sda6 , I need to change root device to /dev/sda5. Can I do it just by copying / to /dev/sda6 and reinstalling grub? Please help me if anyone tried it. Thanks & Regards
-
I just tried to print off some itunes advice but my computer froze. I re-booted it and ran the ipod diagnostic test again to get back to the screen I was on. This time "Secure Link to i tunes store failed" AND "i tunes helper not running" both appe
-
Extensions Load Slow (Mac) After Latest Photoshop Update
I was wondering if anyone else has experienced the below: (On Mac - Mavericks) The latest Photoshop CC 2014 update has slowed down the loading of my two extension (these are extensions I have created in HTML5). Prior to the update they loaded fine. A