10.2.0.1 client installation failed because of operating system version

Hi Guys,
When i tried to install oracle client 10.2.0.1 I encountered an error saying that the operating system must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2. I'm using RHEL 5, are there any ways to install 10.2.0.x client in this red hat linux version?
Failed prerequisite:
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Failed <<<<
Also do oracle have base client installer 10.2.0.[3 and up] for RHEL 5 operating system?
Thanks!

Hi,
10.2.0.1 is not certified for RHEL 5
use
$ ./runinstaller âignoreSysPrereqs
This is required because Oracle 10.2 expects OS to be RHEL 3 or RHEL/OEL 4.
Kindly refer note
Requirements For Installing Oracle10gR2 On RHEL 5/OEL 5 (x86_64) (Doc ID 421308.1)
Thanks,
Krishna

Similar Messages

OS X installation failed because a recovery system can't be created

Hi everyone,
I am running Mac OS X 10.7.4. My macbook is 2.7Ghz Intel Core i7 and has 4GB 1333 Mhz DDR3. I recently bought Mountain Lion from mac appstore and I just cant seem to install it. Everytime I run the installer, it takes 3 minutes and then restarts the macbook and then the installation process starts. When the time remaining reaches about 30 minutes, the following error shows up. I have tried installing it atleast 5-6 times and it doesnt work. Also, i dont have a recovery partition, I dont know why its not there. Pls find the screenshot of my disk utility as well.
I have tried following methods and it still doesnt work:-
Created a 10GB partion and tried running the installer again. Didnt work. Deleted this partition and tried again, didnt work.
Created a 5GB partion. Error still comes.Didnt work. Deleted it. Didnt work.
Created a 2GB partion. Error still comes.Didnt work. Deleted it and still didnt work.
Created a 2GB partion and a 5GB partion and named the 5GB one 'Recovery'. Tried again. Didnt work. Deleted the 2GB one and tried again. Didnot work. Then deleted 5GB one and still didnt work.
I thought ill just install a fresh copy, and put in Mac OX 10.5.6 install CD in it (the one it came with) and tried to install the OSX again. After restart a gray windows comes up with some error stuff written on it and it wouldnt let me install this. It says press power button to restart. So, this didnt work either. (I can give you the screenshot, if you need it)
While rebooting, I pressed Command + R, and went on to internet recovery mode. It took about 4 hours and then it started installing mountain lion onto my sytem and again it failed. Same error as in picture 1.
I have tried everything and it just doesnt work. I am really fedup. Please tell me how can I resolve this issue.

Finally, I found the solution.
I used the default installtion DVD that came with the macbook and booted it. From there, I went to the disk partition and formated the entire partition. Just to be extra safe, I zeroed out all the data (but you dont have to do this). After that, I installed the OS X that was on the setup CD i.e. Snow Leopard. After installing snow leapord, I updated and ran the mountain lion installer again. This time, it worked fine. Also, a recovery partition also got created automatically. So, if youve tried everything and failed, reformat everything and install it again. Works for sure.

Add-on installation failed because another version is already installed

when desinstaler addon, and soon trying to install he himself addon but with a superior version, does not leave. Since it says that it must be a later version, when it is it. There is some site where cleans the registry of addones installed?
the message is : "Add-on Ficheros de banco: Add-on installation failed because another version is already installed. Ensure that the version number is higher than the version previously installed."

The best way is to go in Addon-Project Development and in its Bin directory change its exe name. for example it its exe name is abc.exe then change it to abc1_0.exe
It will work properly.
Regards,
Ganesh

Installation failed because a required role service or feature could not be installed. WS 2008

Hi guys, i have a problem with a Server Windows 2008 SP1 Standar x86, when i tried to reinstall the role of WSUS 3.1 the ServerManager show this Error and i could install again the role.
Thanks for your help:
The Error of the event viewer is the nexT:
Log Name:      Setup
Source:        Microsoft-Windows-ServerManager
Date:          27/03/2009 05:53:21 p.m.
Event ID:      1617
Task Category: None
Level:         Error
Keywords:
User:          DOMAIN\Administrator
Computer:      SOOB.DOMAIN.COM
Description:
Installation failed. A restart is required.
Roles:
Web Server (IIS)
   Error: The server needs to be restarted to undo the changes.
Windows Server Update Services
   Error: Installation failed because a required role service or feature could not be installed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-ServerManager" Guid="{8c474092-13e4-430e-9f06-5b60a529bf38}" />
    <EventID>1617</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2009-03-28T00:53:21.056Z" />
    <EventRecordID>23</EventRecordID>
    <Correlation />
    <Execution ProcessID="1100" ThreadID="2736" />
    <Channel>Setup</Channel>
    <Computer>SOOB.DOMAIN.COM</Computer>
    <Security UserID="S-1-5-21-696557799-1245526101-3093723089-500" />
</System>
<UserData>
    <EventXML xmlns:auto-ns3="http://schemas.microsoft.com/win/2004/08/events" xmlns="Event_NS">
      <message>
Roles:
Web Server (IIS)
   Error: The server needs to be restarted to undo the changes.
Windows Server Update Services
   Error: Installation failed because a required role service or feature could not be installed.
</message>
      <identifiers>WsusRole, WebServerRole, WebServerComponent, CommonHttpFeatures, StaticContent, DefaultDocument, Performance, DynamicContentCompression, ApplicationDevelopment, AspNetPages, InternetServiceApiExtensions, InternetServiceApiFilters, NetFxExtensibility, SecurityComponents, RequestFiltering, WindowsAuthentication, WebServerManagementTools, InternetInformationServices6ManagementCompatibility, InternetInformationServices6DatabaseCompatibility</identifiers>
    </EventXML>
</UserData>
</Event>
Alberto

The above suggestions did not resolve issue in my case;
I did the below to resolve this after lot of research and same worked for me in 3 servers;
1)
Disable UAC by Disabling the setting "User Account Control: Run all administrators in Admin Approval Mode", under Computer
Configuration\Policies\Windows Settings\Security Settings\Local Policies\Security Options. And reboot the server
2)
Remove all existing installed features of dotnet 3.5 and reboot the server
3)
Install Windows Process activation service using add features and reboot the server
4)      NowInstalled Web(IIS)
role features which resulted in successfull installation

Installation of OWB 10.2.0.1 - check operating system version failed

Hi,
I'm trying to install OWB 10.2.0.1 on Windows 2008 server to use it as OWB client.
But I'm not able to continue with the installation due to following error:
Checking installer requirements....
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 6.1 FAILED
Any insight on this would be of great help.
Thanks,
Shaik.

Hi Sutirtha,
Executing the setup in cmd with -ignoreSysPrereqs option as well ending up with the error, in the next step itself.
It says, Abnormal program termination. An internal error occured.
Any suggestion on, which one of below OWB s/w is compatible with Windows 2008 Server R2, 64 bit OS.
---for Microsoft Windows 32-bit, 64-bit (AMD64 / EM64T)
---for Microsoft Windows (64-bit Itanium)
I'm trying this installation with "for Microsoft Windows 32-bit, 64-bit (AMD64 / EM64T) "
Thanks in Advance,
Shaik

I want to schedule my back ups to my Western Digital Elements HDD so that it doesn't interfere with my Skype calls with clients. Operating system - version 10.7.4. The default for Time Machine is to back up every 1 hour. I'd like daily at 3am. Any ideas?

I want to schedule my back ups to my Western Digital Elements HDD so that it doesn't interfere with my Skype calls with clients. Operating system - version 10.7.4. The default for Time Machine is to back up every 1 hour. I'd like daily at 3am. Any ideas?

Time Machine Editor.
Clinton

Create Client Installer Failing

I have a brand new Mac Mini running Apple Remote Desktop 3.5.1 on Lion 10.7.3 that I am trying to create a custom client installer and right at the end it fails every single time. Saying that "An unexpected error has occured while creating a custom installer. Please try again"
Anyone else getting this issue? at all

Custom Installer Issues with 3.5.2 Client and 3.5.1 Admin
Do you have a computer that is pre ARD client update 3.5.2? if so, you could try making your installer with ARD on that client. And you could report the issue.
And you can always send Feedback about ARD to Apple.
In thread Can't install Apple Remote Desktop 3.5.1 custom installer on Lion 10.7.3, Eric Shaheen suggested looking in //private/tmp/RemoteDesktopClientInstaller/ to see if ARD actually did create the installer; and if so, to copy it to the desktop. in the same thread gavin0001 said he was able to modify the 3.5.2 client update to make a custom installer.
You might also want to check out thread I can't get Custom Installer to create accounts on Lion. I'm using ARD 3.5.1.

Client installation fails with error: The client version 4.00.6487.2000 does not match the MP version 2.50.4253.3000. The client wil not be installed.

Hello World,
I have this remote server that used to be a sms 2003 secondary site server. We uninstalled the SMS role. And used the server as an SCCM remote distribution point. We also want to install an client agent on that server machine. But no mather how i try
to install the client i always see the same error in ccmsetup.log:
File download 100% complete (17847296 of 17847296 bytes). ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Download complete. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Successfully downloaded client files. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Searching for available transform ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Failed to find resource file 'client.mst' ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
No transform available for this locale. Installation will proceed with no transformation. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Updated security on object C:\WINDOWS\system32\ccmsetup\. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
An MP exists on this machine. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
The client version 4.00.6487.2000 does not match the MP version 2.50.4253.3000. The client will not be installed. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
A Fallback Status Point has not been specified. Message with STATEID='318' will not be sent. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Deleted file C:\WINDOWS\system32\ccmsetup\WindowsServer2003-KB923845-x86-ENU.exe.download ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
I think the installer finds some remenance of the old SMS_MP. When looking i found some remains in IIS . I tried to remove the remains but still have the same error when installing the client. I uninstalled IIS completly. Can someone tell me where the client
installer looks for the MP version? Would it help if i installed an SCCM MP on that server and the uninstalled it (Upgrade the MP)?

Hello Kent, i ran the ccmclean.exe from the SMS2003 Toolkit. It informed me that my system was cleaned. I ran the sccm client setup manualy and found this in the ccmsetup.log
MSI PROPERTIES are SMSSITECODE=AUTO CCMHTTPPORT="80" CCMHTTPSPORT="443" INSTALL=ALL ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
IsFileMicrosoftTrusted Verified file 'C:\WINDOWS\system32\ccmsetup\{4CD82FBB-0AFC-4864-A089-15364DF5F14B}\client.msi' is MS signed. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
Running installation package
Package: C:\WINDOWS\system32\ccmsetup\{4CD82FBB-0AFC-4864-A089-15364DF5F14B}\client.msi
Log: C:\WINDOWS\system32\ccmsetup\client.msi.log
Properties: SMSSITECODE=AUTO CCMHTTPPORT="80" CCMHTTPSPORT="443" INSTALL=ALL ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: INSTALL. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: WindowsFolder.8AE6A59B_5597_4D75_9BFD_7F566BF56500. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.98C5B086_7EB0_422A_B0A8_674010F525CD. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.4C5E03E8_F8E5_47CB_8FF4_E46FE34D35A6. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: System64Folder.597B26B2_B5D6_40FF_90DA_B8E672626B1D. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: System64Folder.541D9CA5_CE53_4DCE_903A_9B9E5A6EF2C6. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SmsCheckConfig. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:22: SMSValidateClientInstallStamp. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: LaunchConditions. Evaluating launch conditions ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsDetectWindowsEmbeddedFBWF. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsCheckNewRemoteTools. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: AppSearch. Searching for installed applications ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CCPSearch. Searching for qualifying products ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: RMCCPSearch. Searching for qualifying products ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: ValidateProductID. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetInstallDir. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: BCDSetX64Dir. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetInstallDirFromCmdLine. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetPrimaryFolder. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: FindRelatedProducts. Searching for related applications ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsDetectInvalidOrderColocUpgrade. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: An older version of the SMS Management Point is installed. Please upgrade the Management Point before attempting to upgrade the client. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
Installation failed with error code 1603 ccmsetup 8/18/2010 10:48:23 AM 3140 (0x0C44)
Next retry in 120 minute(s)... ccmsetup 8/18/2010 10:48:23 AM 3140 (0x0C44)
Their must be something remaining that ccmclean can't find or can' access so i ran ccmclean /mp. This did some stuff and told me the system was clean again. I reran the client setup.
Guess what
It worked !
Thanxs Kent

Installation fail because of Mozilla

Hi !
I'm trying to install a program client from my university website (http://www.interufr.dauphine.fr/citrix.html) but the installation fail with this error message : "Le programme d'installation ne dispose pas des privilèges nécéssaires pour accéder au répertoire C:\Programme Files(x86)\Mozilla Firefox\Plugins. Impossible de poursuivre l'installation. Ouvrez une session en tant qu'administrateur."
(The installer doesn't have the necessary privileges to access the directory C: \ Program Files (x86) \ Mozilla Firefox \ plugins. Unable to continue the installation. Log on as an administrator).
But the problem is that I just have one account in my computer, and I'm the administrator.
I try to create myself the "Plugins" folder, and then the installation can continue but fail at the next step, and that's the last error message that I can't solve :
An error occurred while writing the file C:\Programme Files(x86)\Mozilla Firefox\Plugins\resource\en\ctxlogUI.dll. verify that you have access to that directory

The plugins folder in the Firefox program folder is no longer used, so Firefox won't find plugins that are copied to this folder.
*https://support.mozilla.org/kb/windows-media-or-other-plugins-stopped-working
So even if you succeed to install the plugin when you run the Citrix installer as Administrator (right-click: Run as Administrator) then you would still have to move the plugin manually to the "browser\plugins" folder.
*http://www.ghacks.net/2013/05/15/why-you-may-have-lost-access-to-plugins-or-extensions-in-firefox-21/
*http://mike.kaply.com/2013/04/24/major-changes-coming-in-firefox-21/

Client installs fail for push or manual

This one has got me stumped, hopefully someone can give me some ideas of what to look at.
Got two servers I'm trying to install the 2012 R2 client onto two servers, we'll call them DP01 and DP02. This is part of the process to install the DP role onto these servers. Doing a push or manual install fails with the below log entries:
<![LOG[Checking the URL 'HTTPS://SCCM00.Skynet.com:443/CCM_Client/ccmsetup.cab']LOG]!><time="01:13:50.400-120" date="04-20-2014" component="ccmsetup" context="" type="1" thread="2068" file="ccmsetup.cpp:10157">
<![LOG[PROPFIND 'HTTPS://SCCM00.Skynet.com:443/CCM_Client']LOG]!><time="01:13:50.400-120" date="04-20-2014" component="ccmsetup" context="" type="1" thread="2068" file="httphelper.cpp:807">
<![LOG[[CCMSETUP] AsyncCallback(): -----------------------------------------------------------------]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="3" thread="2068"
file="httphelper.cpp:698">
<![LOG[[CCMSETUP] AsyncCallback(): WINHTTP_CALLBACK_STATUS_SECURE_FAILURE Encountered]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="3" thread="2068"
file="httphelper.cpp:699">
<![LOG[[CCMSETUP]                : dwStatusInformationLength is 4
]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="3" thread="2068" file="httphelper.cpp:700">
<![LOG[[CCMSETUP]                : *lpvStatusInformation is 0x1
]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="3" thread="2068" file="httphelper.cpp:701">
<![LOG[[CCMSETUP]            : WINHTTP_CALLBACK_STATUS_FLAG_CERT_REV_FAILED is set
]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="3" thread="2068" file="httphelper.cpp:705">
<![LOG[[CCMSETUP] AsyncCallback(): -----------------------------------------------------------------]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="3" thread="2068"
file="httphelper.cpp:731">
<![LOG[Failed to send HTTPS request. (Error at WinHttpSendRequest: 12175)]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="2" thread="2068" file="httphelper.cpp:1214">
<![LOG[WinHttpRequestReponse failed with a non-recoverable failure, 12175]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="3" thread="2068" file="httphelper.cpp:1266">
<![LOG[Failed to check url HTTPS://SCCM00.Skynet.com:443/CCM_Client/ccmsetup.cab 2014" component="ccmsetup" context="" type="3" thread="2068" file="httphelper.cpp:1597">
<![LOG[Accessing the URL 'HTTPS://SCCM00.Skynet.com:443/CCM_Client/ccmsetup.cab' failed with 80072F8F]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="2" thread="2068"
file="ccmsetup.cpp:10195">
<![LOG[Checking the URL 'HTTPS://SCCM02.web.Skynet.com:443/CCM_Client/ccmsetup.cab']LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="1" thread="2068"
file="ccmsetup.cpp:10157">
<![LOG[PROPFIND 'HTTPS://SCCM02.web.Skynet.com:443/CCM_Client']LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="1" thread="2068" file="httphelper.cpp:807">
<![LOG[Failed to correctly receive a WEBDAV HTTPS request.. (StatusCode at WinHttpQueryHeaders: 403)]LOG]!><time="01:14:11.430-120" date="04-20-2014" component="ccmsetup" context="" type="3" thread="2068"
file="httphelper.cpp:1370">
<![LOG[Failed to check url HTTPS://SCCM02.web.Skynet.com:443/CCM_Client/ccmsetup.cab 2014" component="ccmsetup" context="" type="3" thread="2068" file="httphelper.cpp:1597">
<![LOG[Accessing the URL 'HTTPS://SCCM02.web.Skynet.com:443/CCM_Client/ccmsetup.cab' failed with 80004005]LOG]!><time="01:14:11.430-120" date="04-20-2014" component="ccmsetup" context="" type="2" thread="2068"
file="ccmsetup.cpp:10195">
<![LOG[Next retry in 10 minute(s)...]LOG]!><time="01:14:11.430-120" date="04-20-2014" component="ccmsetup" context="" type="0" thread="2068" file="ccmsetup.cpp:8835">
Now, firewalls on both DP01 and DP02 servers are disabled, as are the domain firewalls on both SCCM00 and SCCM02 servers.
I CAN open IE and go to HTTPS://SCCM02.web.Skynet.com:443/CCM_Client and download the files, this works on both DP01 and DP02. So the server does have access, I can also use SMB to browse to the SCCM installation path on the SCCM server from both DP01/02.
Certs on both SCCM servers and DP01/02 servers are valid and not expired.
Boundary groups are setup for the servers.
Other servers and Windows OS boxes have had no issues with client installs or DP role installs, its just these two.
I've restarted both DP and SCCM servers and still get the same error.
Pinging SCCM servers from DP servers has the correct IP's and times less than 120ms.
I know the HTTPS 403 error is Access is Denied, but I can browse to the site with no problems...

certificate chaining issue...
http://msdn.microsoft.com/en-us/library/windows/desktop/aa383770(v=vs.85).aspx
Danovich suggests to check your FQDN vs DN:
http://blog.danovich.com.au/2010/07/09/sccm-clients-not-installing-in-native-mode/
more here (although CM07 is discussed):
http://social.technet.microsoft.com/Forums/systemcenter/en-US/931e839f-a85a-41dd-a175-5546d1316463/client-push-problem-with-ca-cert?forum=configmgrsetup
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Pushing client installation failed to some boundaries whereas successfully installed in some boundaries

Hi
I have a SCCM 2012 RTM installed in my network and before it was working fine and successfully installed clients by Client push method
Now I added another forest and successfully discovered all computers in the second forest able push client and successfully installed
Now my problem is , all client computer's in the first forest activity showing "active" and recieves updates from server without any issue. But I could not push the client installation to new computers on the first forest (active directory). While
monitor the ccmsetup.log file on each new computer the installation get stuck on BITS download
I am not saying , this is server configuration problem because when I push the client installation to the computers on second forest, the package downloaded successfully and client and SCEP installed successfully
I checked and double checked the boundary settings and DP and it was exactly same as the second boundary
I removed the boundary, boundary group and site system for the problematic computers and recreated everything as it is
But no luck still I am recieving the same status on the ccmsetup.log
please help me because I have been playing with this issue for the last one week

Dear Mr Jason,
I have prepared a new laptop with windows 7 and SP1 and joined to domain
In sccm server manually run the AD system Discovery and after a while the new computer appeared on the corresponding collection
I initiated the client pushing on 6.00 PM evening and leave the laptop online (turned off computer sleep settings)
Today morning when I checked only 4 files in c:\Windows\ccmsetup folder and I checked the log.
Later I ran the same command
\\SCCMSERVER\XXX_Package\Client\ccmsetup.exe SMSSITECODE=XXX
SMSSLP=SCCMSERVER
Then
client and SCEP installed successfully within 20 minutes
How
can I find which policy or which settings block the client pushing? Do I need to check any other log file in server ?
Thanks

Client installation failing

Hi, i know there are a few posts on Client installtion failing, but i couldnt find one that fitted my issue.
Short story when i tried to install I was getting this error
<![LOG[No MPs were specified from commandline or the mobileclient.tcf.]LOG]!><time="15:22:55.600+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43348" file="ccmsetup.cpp:10065">
<![LOG[Downloading file ccmsetup.cab]LOG]!><time="15:22:55.600+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43348" file="ccmsetup.cpp:5685">
<![LOG[Determining source location...]LOG]!><time="15:22:55.600+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43348" file="ccmsetup.cpp:5535">
<![LOG[Source \\LON1WSUS01.ewns.net\SMSClient is inaccessible (67)]LOG]!><time="15:23:00.308+00" date="03-17-2014" component="ccmsetup" context="" type="2" thread="43348" file="ccmsetup.cpp:5470">
<![LOG[Source \\LON1WSUS01.EWNS.NET\SMSClient is inaccessible (67)]LOG]!><time="15:23:02.588+00" date="03-17-2014" component="ccmsetup" context="" type="2" thread="43348" file="ccmsetup.cpp:5470">
<![LOG[Failed to find accessible source. Waiting for retry.]LOG]!><time="15:23:02.588+00" date="03-17-2014" component="ccmsetup" context="" type="2" thread="43348" file="ccmsetup.cpp:5599">
<![LOG[Next retry in 10 minute(s)...]LOG]!><time="15:23:02.588+00" date="03-17-2014" component="ccmsetup" context="" type="0" thread="43348" file="ccmsetup.cpp:8835">
I noticed I didnt have the following share 'SMSClient' so created it and put the client installtion files in it, but got the error
<![LOG[Downloading \\LON1WSUS01.ewns.net\SMSClient\ccmsetup.cab to C:\Windows\ccmsetup\ccmsetup.cab]LOG]!><time="15:07:53.147+00" date="03-17-2014" component="ccmsetup" context="" type="1"
thread="37932" file="ccmsetup.cpp:5769">
<![LOG[Failed to access source file (2). Waiting for retry...]LOG]!><time="15:07:53.164+00" date="03-17-2014" component="ccmsetup" context="" type="2" thread="37932" file="ccmsetup.cpp:5781">
<![LOG[Next retry in 10 minute(s)...]LOG]!><time="15:07:53.164+00" date="03-17-2014" component="ccmsetup" context="" type="0" thread="37932" file="ccmsetup.cpp:8835">
That was a long shot, as am sure there is a proper way to get the source files in the share, but it didnt create the share on setup of System Manager. Did I miss a step? How do i get it to populate the share with the client install files, or
create a new MP maybe?
Any assistance would be appreciated. Thanks

Managed to set MP to HTTP, thank you that was what was causing that issue, but now its coming up with a different issue
<![LOG[==========[ ccmsetup started in process 44212 ]==========]LOG]!><time="16:58:02.284+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43496" file="ccmsetup.cpp:9437">
<![LOG[Running on platform X64]LOG]!><time="16:58:02.285+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43496" file="util.cpp:1837">
<![LOG[Launch from folder C:\Windows\ccmsetup\]LOG]!><time="16:58:02.286+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43496" file="ccmsetup.cpp:721">
<![LOG[CcmSetup version: 5.0.7958.1000]LOG]!><time="16:58:02.286+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43496" file="ccmsetup.cpp:727">
<![LOG[In ServiceMain]LOG]!><time="16:58:02.287+00" date="03-17-2014" component="ccmsetup" context="" type="0" thread="43240" file="ccmsetup.cpp:3365">
<![LOG[Running on 'Microsoft Windows 7 Professional ' (6.1.7601). Service Pack (1.0). SuiteMask = 272. Product Type = 18]LOG]!><time="16:58:02.383+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="util.cpp:1919">
<![LOG[Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="16:58:02.383+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:3590">
<![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="16:58:02.383+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:3775">
<![LOG[Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="16:58:02.383+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:3776">
<![LOG[SslState value: 224]LOG]!><time="16:58:02.386+00" date="03-17-2014" component="ccmsetup" context="" type="0" thread="43240" file="ccmsetup.cpp:4425">
<![LOG[CCMHTTPPORT: 80]LOG]!><time="16:58:02.387+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:8617">
<![LOG[CCMHTTPSPORT: 443]LOG]!><time="16:58:02.387+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:8632">
<![LOG[CCMHTTPSSTATE: 480]LOG]!><time="16:58:02.387+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:8650">
<![LOG[CCMHTTPSCERTNAME: ]LOG]!><time="16:58:02.388+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:8668">
<![LOG[FSP: ]LOG]!><time="16:58:02.388+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:8720">
<![LOG[CCMFIRSTCERT: 1]LOG]!><time="16:58:02.388+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:8778">
<![LOG[Config file: C:\Windows\ccmsetup\MobileClientUnicode.tcf]LOG]!><time="16:58:02.388+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:4539">
<![LOG[Retry time: 10 minute(s)]LOG]!><time="16:58:02.388+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:4540">
<![LOG[MSI log file: C:\Windows\ccmsetup\Logs\client.msi.log]LOG]!><time="16:58:02.389+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:4541">
<![LOG[MSI properties: INSTALL="ALL" SMSSITECODE="LON" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="480" CCMFIRSTCERT="1"]LOG]!><time="16:58:02.389+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:4542">
<![LOG[Source List:]LOG]!><time="16:58:02.389+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:4550">
<![LOG[ \\LON1WSUS01.ewns.net\SMSClient]LOG]!><time="16:58:02.389+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:4557">
<![LOG[ \\LON1WSUS01.EWNS.NET\SMSClient]LOG]!><time="16:58:02.389+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:4566">
<![LOG[MPs:]LOG]!><time="16:58:02.389+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:4569">
<![LOG[ LON1WSUS01.ewns.net]LOG]!><time="16:58:02.389+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:4584">
<![LOG[No version of the client is currently detected.]LOG]!><time="16:58:02.390+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:2748">
<![LOG[Folder 'Microsoft\Configuration Manager' not found. Task does not exist.]LOG]!><time="16:58:02.392+00" date="03-17-2014" component="ccmsetup" context="" type="0" thread="43240" file="wintask.cpp:622">
<![LOG[Updated security on object C:\Windows\ccmsetup\.]LOG]!><time="16:58:02.393+00" date="03-17-2014" component="ccmsetup" context="" type="0" thread="43240" file="ccmsetup.cpp:9281">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='100' will not be sent.]LOG]!><time="16:58:02.393+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:9763">
<![LOG[Running as user "SYSTEM"]LOG]!><time="16:58:02.399+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:1995">
<![LOG[Detected 50941 MB free disk space on system drive.]LOG]!><time="16:58:02.400+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="util.cpp:628">
<![LOG[Checking Write Filter Status.]LOG]!><time="16:58:02.400+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:2024">
<![LOG[This is not a supported write filter device. We are not in a write filter maintenance mode.]LOG]!><time="16:58:02.400+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:2051">
<![LOG[Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=LON))']LOG]!><time="16:58:02.425+00" date="03-17-2014" component="ccmsetup" context="" type="0" thread="43240" file="lsad.cpp:656">
<![LOG[OperationalXml '<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>480</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers></CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>LON</RootSiteCode><CCM>
<CommandLine>SMSSITECODE=LON</CommandLine> </CCM><FSP> <FSPServer></FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState" Value="0" /></Capabilities><Domain Value="ewns.net"
/><Forest Value="ewns.net" /></ClientOperationalSettings>']LOG]!><time="16:58:02.795+00" date="03-17-2014" component="ccmsetup" context="" type="0" thread="43240" file="lsadcache.cpp:236">
<![LOG[Unable to open Registry key Software\Microsoft\CCM. Return Code [80070002]. Client HTTPS state is Unknown.]LOG]!><time="16:58:02.797+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmutillib.cpp:373">
<![LOG[The MP name retrieved is 'LON1WSUS01.ewns.net' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>']LOG]!><time="16:58:02.797+00" date="03-17-2014" component="ccmsetup"
context="" type="1" thread="43240" file="lsadcache.cpp:334">
<![LOG[MP 'LON1WSUS01.ewns.net' is compatible]LOG]!><time="16:58:02.797+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="lsadcache.cpp:339">
<![LOG[Retrieved 1 MP records from AD for site 'LON']LOG]!><time="16:58:02.797+00" date="03-17-2014" component="ccmsetup" context="" type="0" thread="43240" file="lsadcache.cpp:287">
<![LOG[Retrived site version '5.00.7958.1000' from AD for site 'LON']LOG]!><time="16:58:02.799+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="siteinfo.cpp:575">
<![LOG[SiteCode: LON]LOG]!><time="16:58:02.799+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:2076">
<![LOG[SiteVersion: 5.00.7958.1000]LOG]!><time="16:58:02.799+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:2077">
<![LOG[Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again.]LOG]!><time="16:58:02.799+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:2111">
<![LOG[Only one MP LON1WSUS01.ewns.net is specified. Use it.]LOG]!><time="16:58:02.799+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:10080">
<![LOG[Searching for DP locations from MP(s)...]LOG]!><time="16:58:02.799+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:11018">
<![LOG[Current AD site of machine is EMEA-LON1]LOG]!><time="16:58:02.800+00" date="03-17-2014" component="LocationServices" context="" type="1" thread="43240" file="lsad.cpp:770">
<![LOG[Local Machine is joined to an AD domain]LOG]!><time="16:58:02.800+00" date="03-17-2014" component="LocationServices" context="" type="0" thread="43240" file="lsad.cpp:714">
<![LOG[Current AD forest name is ewns.net, domain name is ewns.net]LOG]!><time="16:58:02.802+00" date="03-17-2014" component="LocationServices" context="" type="1" thread="43240" file="lsad.cpp:842">
<![LOG[DhcpGetOriginalSubnetMask entry point is supported.]LOG]!><time="16:58:02.803+00" date="03-17-2014" component="LocationServices" context="" type="0" thread="43240" file="ccmiputil.cpp:117">
<![LOG[Begin checking Alternate Network Configuration]LOG]!><time="16:58:02.803+00" date="03-17-2014" component="LocationServices" context="" type="0" thread="43240" file="ccmiputil.cpp:1095">
<![LOG[Finished checking Alternate Network Configuration]LOG]!><time="16:58:02.804+00" date="03-17-2014" component="LocationServices" context="" type="0" thread="43240" file="ccmiputil.cpp:1172">
<![LOG[Adapter {E001E119-8C95-4325-859D-D165E0DE24C3} is DHCP enabled. Checking quarantine status.]LOG]!><time="16:58:02.806+00" date="03-17-2014" component="LocationServices" context="" type="0" thread="43240" file="ccmiputil.cpp:436">
<![LOG[Adapter {1CD2E603-E441-4FA9-98A8-A122F8EA8ACB} is DHCP enabled. Checking quarantine status.]LOG]!><time="16:58:02.806+00" date="03-17-2014" component="LocationServices" context="" type="0" thread="43240" file="ccmiputil.cpp:436">
<![LOG[Adapter {143FDB8B-8137-4CDC-8836-28F3808D5D21} is DHCP enabled. Checking quarantine status.]LOG]!><time="16:58:02.806+00" date="03-17-2014" component="LocationServices" context="" type="0" thread="43240" file="ccmiputil.cpp:436">
<![LOG[Adapter {664903C0-FD2C-4988-B8F1-C14840D3188D} is DHCP enabled. Checking quarantine status.]LOG]!><time="16:58:02.806+00" date="03-17-2014" component="LocationServices" context="" type="0" thread="43240" file="ccmiputil.cpp:436">
<![LOG[Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="LON"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0" UseInternetDP="0">
<ADSite Name="EMEA-LON1"/>
<Forest Name="ewns.net"/>
<Domain Name="ewns.net"/>
<IPAddresses>
<IPAddress SubnetAddress="172.22.2.0" Address="172.22.2.143"/>
</IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
']LOG]!><time="16:58:02.813+00" date="03-17-2014" component="ccmsetup" context="" type="0" thread="43240" file="siteinfo.cpp:96">
<![LOG[Sending message header '<Msg SchemaVersion="1.1"><ID>{21FB413F-603E-40D4-A34D-1D47EDEC7F60}</ID><SourceHost>LON1-PCL-1433</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:LON1-PCL-1433:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>LON1WSUS01.ewns.net</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-03-17T16:58:02Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1080"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="16:58:02.813+00" date="03-17-2014" component="ccmsetup" context="" type="0" thread="43240"
file="siteinfo.cpp:177">
<![LOG[CCM_POST 'HTTP://LON1WSUS01.ewns.net/ccm_system/request']LOG]!><time="16:58:02.813+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="httphelper.cpp:807">
<![LOG[Failed to receive ccm message response. Status code = 404]LOG]!><time="16:58:02.833+00" date="03-17-2014" component="ccmsetup" context="" type="2" thread="43240" file="httphelper.cpp:1694">
<![LOG[GetDPLocations failed with error 0x80004005]LOG]!><time="16:58:02.834+00" date="03-17-2014" component="ccmsetup" context="" type="3" thread="43240" file="siteinfo.cpp:532">
<![LOG[Failed to get DP locations as the expected version from MP 'LON1WSUS01.ewns.net'. Error 0x80004005]LOG]!><time="16:58:02.834+00" date="03-17-2014" component="ccmsetup" context="" type="2" thread="43240" file="ccmsetup.cpp:11261">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='101' will not be sent.]LOG]!><time="16:58:02.834+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:9763">
<![LOG[Next retry in 10 minute(s)...]LOG]!><time="16:58:02.834+00" date="03-17-2014" component="ccmsetup" context="" type="0" thread="43240" file="ccmsetup.cpp:8835">

Lync 2010 Client installation failed

I cant install Lync 2010 Client, it fails after "following programs'll be closed" with message "Files in use check failed". It's evaluation x86 version, OS is Windows 7.
Please help me to solve the problem.
Lync-Setup-0.Setuplog error lines are here:
10/14/2010|18:15:45.101 16C0:E00 ERROR :: AddFilesForStartManagerbyRegGUID (line 2690) First reading from registry failed (hr=0x00000002)
10/14/2010|18:15:45.101 16C0:E00 ERROR :: ReadRegistryString (line 2841) RegOpenKeyEx bit (hr=0x00000002)
10/14/2010|18:15:45.101 16C0:E00 ERROR :: AddFilesForStartManagerbyRegGUID (line 2690) First reading from registry failed (hr=0x00000002)
10/14/2010|18:15:45.101 16C0:E00 ERROR :: ReadRegistryString (line 2841) RegOpenKeyEx bit (hr=0x00000002)
10/14/2010|18:15:45.101 16C0:E00 ERROR :: AddFilesForStartManagerbyRegGUID (line 2690) First reading from registry failed (hr=0x00000002)
10/14/2010|18:15:45.102 16C0:E00 ERROR :: GetInstallDirectory (line 382) (hr=0x80070648)
10/14/2010|18:15:45.102 16C0:E00 ERROR :: CheckFilesInUse (line 1475) InitRestartManager FAILED. (hr=0x80070648)
10/14/2010|18:15:45.102 16C0:E00 ERROR :: InstallThreadProc (line 1977) FilesInUseFiles In Use check failed. Please review logfile for details and try again (hr=0x80070648)
10/14/2010|18:15:45.102 16C0:E00 ERROR :: RestartAppsRM (line 578) RmRestart handle. (hr=0x00000000)
10/14/2010|18:15:45.102 16C0:E00 ERROR :: RestartAppsRM (line 582) RmRestart FAILED. (hr=0x80070308)
10/14/2010|18:15:45.104 16C0:E00 ERROR :: InstallThreadProc (line 2381) (hr=0x80070648)
10/14/2010|18:15:45.104 16C0:E00 ERROR :: InstallThreadProc (line 2382): Installation failed. Please review logfile for details and try again.

I found a pretty simple solution to this problem. If you just run the Lync.msi rather than the OCSetupLauncher.exe it seemed to fix my issue.
However, before you can run the Lync.msi you must add a registry entry:
HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Communicator
DWORD -> UseMSIForLyncInstallation
-> set = 1
Source: http://support.microsoft.com/kb/2477965
I know this is an old post but maybe this will help someone.

HT1926 Installation fails because Apple Mobile Device Service failed to start?

When I attempted to update ITunes, it failed at the starting services point because "Apple Mobile Device Service failed to start". The ignore button would not work. Retry did not fix it. I have deleted all ITunes from my computer, restarted, and attempted a new install. Same problem. Help.

The frequently suggested repair steps listed in comments at http://support.apple.com/kb/HT1923 and http://support.apple.com/kb/HT1926 did not work for me yesterday when I attempted for an entire day to fix this commonly reported problem with the newest iTunes update. I now realize that I overlooked one step listed in http://support.apple.com/kb/HT1923.
My computer has a Windows 64 bit operating system. I should have paid attention to this instruction:
"If you have a 64-bit version of Windows, you'll need to confirm that the following folders have been removed:
C:\Program Files (x86)\Bonjour
C:\Program Files (x86)\Common Files\Apple\
C:\Program Files (x86)\iTunes\
C:\Program Files (x86)\iPod\ "
Tonight, I removed those previous version files from the Program Files (x86) directory and executed the rest of the steps listed. Success resulted. If you are struggling like I did to install the iTunes newest update on a Windows 64 bit operating system, you might benefit to recheck that you followed the instruction listed above.

Windows server 2012 Datacenter Hyper-V Cluster -- Failed to validate Operating System Installation Option?

Hi I have a 4 node Windows server 2012 Hyper-V cluster. When I try to run a cluster validation report, everything else is fine but it fails at validate the Operating System Installation Option step. I did some research but couldn't really find any solution.
Anyone knows how to pass this test? Thanks.
Here's the error I get when run the test:
An error occurred while executing the test.
The operation has failed. An error occurred while getting the operating system installation option for node "server1"

Hi JasonLiu2002,
Please post the original error information, the current information is so wide that difficult to determine where may have issue and please offer more information about your
server configuration, you can refer the following article to prepare your cluster environment first.
Windows Server 2012 Hyper-V Best Practices (In Easy Checklist Form)
http://blogs.technet.com/b/askpfeplat/archive/2013/03/10/windows-server-2012-hyper-v-best-practices-in-easy-checklist-form.aspx
When you preparing the new cluster on Server 2012 please install the Recommended hotfixes and updates for Windows Server 2012-based failover clusters updates.
http://support.microsoft.com/kb/2784261
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

10.2.0.1 client installation failed because of operating system version

Similar Messages

Maybe you are looking for