10.2.0.2.0 Driver release date
This may be a dumb question but I can't seem to find it. Can anyone tell me when this driver was released? I can see that it was originally built in January of last year but is that reliable in determining a release date?
Thanks in advance.
Hi,
10.2.0.2 has been released Feb 24, 2006
Kuassi http://db360.blogspot.com
Similar Messages
-
NVidia GeForce 344.11 Driver Release date 9/18/2014 crashes Win 8.1 Pro
NVidia GeForce 344.11 Driver Release date 9/18/2014 crashes/kills/shuts down Win 8.1 Pro, which also fails to start!
The previous version 340.52 worked ok.
Solution to get a working system:
1) let Win 8.1 take into use the previous working version (you may loose some app updates)!
2) let Win 8.1 pro update itself (takes a long time but its worth waiting!)
Note:
a. Ten points to Win 8.1 Pro being able to restore the previous working version
note: compare to Linux with eternal rest loop and "kernel in panic" state if you use NVidia's new drivers!!
b. Zero points to NVidia from this bug!
Continuation: waiting for a well tested new NVidia driver while using the older oneHi, had exactly the same last night, on my relatively clean 8.1 64bit, GeForce Experience flagged up a recommended upgrade from 340.52 to 344.11 on my GTX650 ASUS card. Bumbled along for a while, then blue screened, reported kernel damage,
wouldn't even get far enough to restore, so had to use the 8.1 disks. Today, given its a completely clean system I tried again to prove the Nvidia was to blame, and again GeForce flagged up this upgrade, there's nothing on the system except
for Office and Avast, and again completely crashed and cycled the blue screen trying to boot. This time it eventually went into repair mode and restored right back to a clean 8.1 without the DVD's, but still had to reinstall my apps. Lots about
this on forums, seems this upgrade scrambles the registry big time. Anyone know what the actual cause of this was ?? Pretty fed up with Nvidia releasing untested crap like this. -
Has anyone tried the new NVIDIA Quadro Notebook Driver Release 3310.70 WHQL (Release Date:
2012.12.10) yet?
http://www.nvidia.com/object/quadro-notebook-win8-win7-winvista-64bit-310.70-whql-driver.html
RELEASE HIGHLIGHTS :
New in Release 310.70:
ODE Driver WHQL
The R310 drivers are the fourth ‘Optimal Drivers for Enterprise’, a release dedicated to relatively long term stability for ISV certification, OEMs, and Enterprise customers.
OepnGL 4.3 support on Kepler and Fermi series GPUs.
Workstation Features – Mosaic and Sync
Mosaic topology configurations are now preserved across driver over installs for 310 and up.
Sync settings will persist across driver over install with 310 drivers and up.
NVWMI 2.9
Workstation: Windows 7 and later
Improves performance of the profile framework
Implements saving on an nView desktop profile in the method ProfileManager::saveDesktopProfile
Supports saving a display EDID in the method Display::saveEDID
NVIDIA Control Panel
The NVIDIA Control Panel Access Control features allow workstation enterprise administrators to control which features of the NVIDIA Control Panel are available to users.
Manage 3D Settings Category: NVIDIA Driver Controlled Mode – Windows 7 and later
New mode that causes the GPU to automatically apply the best performance and image quality settings when using features such as Mosaic, SDI, and G-Sync/Quadro Sync.
Display-> Change Resolution Page: Select Displays option – Windows 7 and later
New option to apply customer resolutions to multiple displays at once.
nView Desktop Manager
Bird’s Eye View feature replaces the UI tab->edit gridlines feature. Provides a 10,000 foot overview of all desktops and allows manipulation of windows, desktops and gridlines.
Workstation application compatibility fixes. Please read the release notes for more information on product support, feature limitations, driver fixes and known compatibility issues.
W520 4270CTO i7-2820QM Quadro2000M 1920x1080 Display 16GB RAM 2x240GB Intel 510 SSDs (RAID 0) - BIOS 1.42 - PCMark7:4,568
Samsung Series 9 15-inch NP900X4C-A03US - PCMark7: 4674@harrisb: If it's not broken, don't fix it.
I had frequent IE9 freezes.
MIrcrosoft Action Center assigned the cause to NVIDIA and recommended updating the NVIDIA driver.
I installed Version 310.70 WHQL and so far everything is running smoothly.
W520 4270CTO i7-2820QM Quadro2000M 1920x1080 Display 16GB RAM 2x240GB Intel 510 SSDs (RAID 0) - BIOS 1.42 - PCMark7:4,568
Samsung Series 9 15-inch NP900X4C-A03US - PCMark7: 4674 -
Looking for release dates of Apple external hard drive and Tape Backup 40SC
Does anyone know the release date of these two SCSI drives? If you can ballpark it that would help, but please indicate how certain you are.
1. "Apple External Hard Drive", 730MB
Image: http://www.bigkey.com/pic/apple/drives/apple2_gig_external_harddisk.jpg
2. Apple "Tape Backup 40SC"
Image: http://www.borkware.com/rants/stuc-on-you/AppleTapeBackup2.jpgRe: the Hard Drive.
I have an Apple brochure dated Feb 1989 that offers the Apple hard Drives: 20SC, 40SC, 80SC, and 160SC \[and that's all].
My recollection of the drive you pictured is that it was mildly scandalous because they were not even made by Apple -- they were made by a prominent (in those days) drive reseller with the Apple logo on them.
RE: the tape drive
I bought my first Mac, a Mac II, in late 1987. Apple Unix was soon offered for it, but there was no practical way to issue the software except to buy a Hard Drive 80 with Apple Unix pre-installed. The tape backup unit pictured was available some time later, but was far too expensive to use for issuing software. -
Hi,
I'm running
Red Hat Linux 5, MySQL and BOXI 3.1
I try and schedule a report in the CMC and the report fails with the error
A database error occured. The database error text is: {Driver Manager} Data source name not found, and no default driver specified. (WIS 10901)
I've went through the steps in the Bus Obj's Documentation outlining how to install the unixODBC (though this doco was for R2 - I'm not certain whether this install is needed for 3.1).
Error WIS 10901 details
Database error: . Contact your administrator or database supplier+
for more information. (WIS 10901)
The database that provides the data to this document has generated an error.
Cause
Details about the error are provided in the section of the message indicated
+by the field code: .
Contact your BusinessObjects administrator with the error message
Action
information or consult the documentation provided by the supplier of the
database.
Any pointers suggestions on how to set up correctly the unixODBC will be looked into.
Thanks for taking the time to view this post.
CheersHi again Aravind,
I hope you're not beginning to wish you had never answered that first question from me since it seems as if I'm now backing up the truck with regard to the entire question. If I'm asking too much from you let me know I don't wanna overstep the line with repect to what should and shouln't be asked in these forums'
anyway I looked in that env.sh script. It was huge (pity I can't attach the file, I've appended it but it makes these threads somewhat lengthy)
DEFAULT_ODBCFILE="$BOBJEDIR"defaultodbc.ini
export DEFAULT_ODBCFILE
+ODBC_HOME="$odbc"+
export ODBC_HOME
also
# setup the mysql env variables
if [ -d "$BOBJEDIR"/mysql ]; then
# mysql env variables
set up the odbc symlink to work around:*
The DataDirect SQL Server ODBC driver on UNIX will not function properly under a*
locale other than "en_US" due to strong dependencies on their locale files.*
MYSQL_UNIX_PORT="$BOBJEDIR"mysql/mysql.sock
export MYSQL_UNIX_PORT
We want to be able to source the config file multiple times.
fi
if [ -d "$BOBJEDIR"/tomcat ]; then
set the JAVA_OPTS for tomcat
I see what you were referring to earlier with
if [ -d "$ODBC_HOME/locale" ]; then
the javascript files are kept here
The machine name
The user name
MYLOCALE=`locale | grep LC_MESSAGES | sed -e 's|LC_MESSAGES="||g' -e 's|"$||g'`The default registry
if [ ! -d "$ODBC_HOME/locale/$MYLOCALE" ]; then
ln -s "$ODBC_HOME/locale/en_US" "$ODBC_HOME/locale/$MYLOCALE"
fi
fi
Again cheers for your help in this matter.
#!/bin/sh
BOBJEDIR="/home/eberwick/BO_3_1/bobje/"
export BOBJEDIR
BODIR="`dirname $BOBJEDIR`/"
export BODIR
DEFAULTFILE="$
check for existence of u flag, if it is there, turn it off.
Set a flag so we don't source the environment more than once
webi config file
ccm.config"
if [ -f "$DEFAULTFILE" ]; then
. "$DEFAULTFILE"
fi
. "${BOBJEDIR?}setup/modify_ko_locale.sh"
SOFTWARE=`uname -s`
OBJECT_MODEL=`grep Platform $BODIR/setup/ProductID.txt | awk '{print $4;}'`
[ -z "$OBJECT_MODEL" ] && OBJECT_MODEL=32
SOFTWAREPATH=`grep SoftwarePath $BODIR/setup/ProductID.txt | awk '{print $3;}'`
U_FLAG=0
if [ X"$SOFTWARE" = "XHP-UX" ]; then
unset the LANG so that we don't get the localized version of 'unlimited' if the localized system messages are installed.
raise the ulimits to max allowed
undo that bug workaround from above
figure out what architecture we're on
now that we're localized, deal with unknown architecture
we include English, as localization may have failed
set the JDK variable
if [ x`echo $- | grep "u"` != "x" ]; then
set +u
U_FLAG=1
fi
fi
if [ x"$BOBJE_ENV_SOURCED" = x ]; then
if [ -f "$setup/boconfig.cfg" ]; then
HKEY_LOCAL_MACHINE="$setup/boconfig.cfg"
export HKEY_LOCAL_MACHINE
fi
BOBJE_ENV_SOURCED="true"
export BOBJE_ENV_SOURCED
BOBJEVERSION="12.0"
export BOBJEVERSION
LANGWAS="$LANG"
unset LANG
LC_ALLWAS="$LC_ALL"
unset LC_ALL
ulimit -Sn `ulimit -Hn` # max file descriptors
ulimit -S -c `ulimit -H -c` # max core file size
ulimit -S -d `ulimit -H -d` # max data segment size
ulimit -S -f `ulimit -H -f` # max file size
ulimit -S -s `ulimit -H -s` # max stack
ulimit -S -t `ulimit -H -t` # max CPU time
LANG="$LANGWAS"; export LANG
unset LANGWAS
LC_ALL="$LC_ALLWAS"; export LC_ALL
unset LC_ALLWAS
case X"$SOFTWARE" in
XLinux) SOFTWARELC="linux"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0"; CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12" ;;
XAIX) SOFTWARELC="aix"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX=".12.0${SHAREDLIBSUFFIX?}"; CB1SYMLINKLIBSUFFIX=".12${SHAREDLIBSUFFIX?}";;
XSunOS) SOFTWARELC="solaris"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0"; CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12";;
XHP-UX)
SOFTWARELC="hpux";
if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
SHAREDLIBSUFFIX=".so";
else
SHAREDLIBSUFFIX=".sl";
fi
CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0";
CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12";;
esac
export SOFTWAREPATH
export SOFTWARE
export SHAREDLIBSUFFIX
export CB1LIBSUFFIX
export CB1SYMLINKLIBSUFFIX
if [ "$SOFTWAREPATH" = "" ]; then
echo "$UNKNOWNPLATFORM (unknown platform): $SOFTWARE"
exit 1
fi
if [ -d "$BOBJEDIR"/jdk ]; then
JAVA_HOME="$jdk"
export JAVA_HOME
fi
JAVA_OPTS="-d$OBJECT_MODEL -Dbobj.enterprise.home=$
fi
setting AAHOME here so when CAD starts the value is set
enterprise120 -Djava.awt.headless=true -Djava.net.preferIPv4Stack=false"
if [ "$SOFTWARE" = "AIX" -o "$SOFTWARE" = "SunOS" -o "$SOFTWARE" = "Linux" -o "$SOFTWARE" = "HP-UX" ]; then
JAVA_OPTS="$JAVA_OPTS -Xmx1024m -XX:MaxPermSize=256m"
fi
export JAVA_OPTS
if [ -d "$Dashboard_Analytics_120" ]; then
AAHOME="$Dashboard_Analytics_120"
export AAHOME
fi
WCSDIR="$enterprise120/$SOFTWAREPATH/wcs/"
export WCSDIR
WCSBINDIR="$bin/"
export WCSBINDIR
WCSCOMPONENTDIR="$components/"
export WCSCOMPONENTDIR
BINDIR="$enterprise120/$SOFTWAREPATH/"
export BINDIR
LIBDIR="$enterprise120/$SOFTWAREPATH/"
export LIBDIR
PLUGINDIR="$enterprise120/packages/"
export PLUGINDIR
PLUGINDIST="$enterprise120/$SOFTWAREPATH/plugins/"
export PLUGINDIST
LOGDIR="$append the new valuelogging/"
export LOGDIR
if [ x"$BOE_LOGGER_ENVIRONMENT" = x ]; then
BOE_LOGGER_ENVIRONMENT="-loggingPath $LOGDIR"
else
BOE_LOGGER_ENVIRONMENT="$BOE_LOGGER_ENVIRONMENT -loggingPath $LOGDIR"
fi
export BOE_LOGGER_ENVIRONMENT
SCRIPTDIR="$enterprise120/generic/"
export SCRIPTDIR
JAVASCRIPTDIR="$setup/jscripts/"
export JAVASCRIPTDIR
MACHINENAME=`uname -n`
export MACHINENAME
removeUTF8SpecificsForKorean
STRIPPEDMACHINENAME=`hostname | sed -e 's/\..*//'`
export STRIPPEDMACHINENAME
if [ x"$BOBJEUSERNAME" = x ]; then
BOBJEUSERNAME=`id | sed -e "s|).\$||" -e "s|^.(||" `
export BOBJEUSERNAME
fi
restoreUTF8SpecificsForKorean
DEFAULT_REGFILE="$BOBJEDIR"setup/.defaultreg
export DEFAULT_REGFILE
REGFILE="$BOBJEDIR"data/.bobj
export REGFILE
BOE_REGISTRYHOME="$REGFILE/registry"
export BOE_REGISTRYHOME
DEFAULT_ODBCFILE="$BOBJEDIR"defaultodbc.ini
export DEFAULT_ODBCFILE
ODBC_HOME="$odbc"
export ODBC_HOME
the PID file location
PIDDIR="$BOBJEDIR"serverpids
export PIDDIR
SQLRULEDIRECTORY="$LIBDIR"
export SQLRULEDIRECTORY
PATH="$BINDIR:$crpe/xvfb:$PATH"
export PATH
CRPEPATH="$enterprise120/$SOFTWAREPATH/crpe/"
export CRPEPATH
MWHOME="$mw/"
export MWHOME
BOBJEXVFBPATH="$xvfb/"
export BOBJEXVFBPATH
MWUSER_DIRECTORY="$once the crpe is in, we should exit if this file doesn't exist.
Uncomment this to turn off Xvfb security and allow connections from
everyone.
MW_XVFB_AC="1"
export MW_XVFB_AC
Use a seperate .Xauthority file. Comment out this line if you want
to use the user's .Xauthority file for storing the Xvfb authentication
tokens.
registry/"
export MWUSER_DIRECTORY
MWRT_MODE="professional"
export MWRT_MODE
MWREGISTRY=":$MWUSER_DIRECTORY/hklm_$
Mainwin can deadlock unless this is set
Prevents Mainwin from popping up dialogs in some situations, causing a deadlock
variables merged from RAS
XVFB Manager
Environment Variables:
MW_XVFB_EXE = Name of the Xvfb exe.
Default is 'Xvfb'.
MW_XVFB_DAEMON = Name of the XvfbDaemon exe.
Default is 'XvfbDaemon'.
MW_XVFB_DAEMON_PORT = Port number that Xvfb Daemon will listen too.
Default is 5222.
MW_XVFB_DAEMON_HOST = Host on which the XvfbDeamon is running.
Default is Local host.
MW_XVFB_DAEMON_XVFB = Number of Xvfb to run.
Default is '5'.
MW_XVFB_DAEMON_DISPLAY = Starting display number for Xvfb.
Default is '1'.
MW_XVFB_DAEMON_PROFILE = Path to the Security Profile for Xvfb.
Default is 'SecurityProfile'.
MW_XVFB_DAEMON_TRACE = Set to turn on tracing information.
Default is undefined.
MW_XVFB_DAEMON_DIE = Turn off the exit code if no more connections.
Default is undefined.
MW_XVFB_FONT = Locations from which to load font
By this symbol being defined, the checking for a current set display is disabled.
Set to turn on tracing info when defined. Default is undefined.
MW_XVFB_DAEMON_TRACE=defined
export MW_XVFB_DAEMON_TRACE
RAS Home
.bin"
export MWREGISTRY
MWCORE_PRIVATE_DATA="$MWUSER_DIRECTORY/core_data"
export MWCORE_PRIVATE_DATA
if [ -f "$MWHOME"setmwruntime ]; then
. "$MWHOME"setmwruntime
fi
MWNT_OLE_DOCS=true
export MWNT_OLE_DOCS
MWPRINTER_DPI=600
export MWPRINTER_DPI
MWVISUAL_CLASS="TrueColor"
export MWVISUAL_CLASS
if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
MWTHREAD_STACK="200000"
else
MWTHREAD_STACK="FA000"
fi
export MWTHREAD_STACK
MWFONT_DIR_PATH="$fonts/"
export MWFONT_DIR_PATH
MW_XVFB_DAEMON_FONT="$misc/"
export MW_XVFB_DAEMON_FONT
XAUTHORITY="$xvfb/.Xauthority"
export XAUTHORITY
MWDEBUG_LEVEL=0
export MWDEBUG_LEVEL
MWINVISIBLE_DISPLAY=1
export MWINVISIBLE_DISPLAY
MWNO_SIGCHLD_IGNORE=1
export MWNO_SIGCHLD_IGNORE
MWLOOK=motif
export MWLOOK
MW_XVFB_DAEMON_PROFILE="$BOBJEXVFBPATH/SecurityPolicy"
export MW_XVFB_DAEMON_PROFILE
MW_XVFB_DAEMON_IGNORE_DISPLAY="true"
export MW_XVFB_DAEMON_IGNORE_DISPLAY
if [ "$SOFTWARE" = "HP-UX" ]; then
MW_XVFB_DAEMON_XVFB=10
else
MW_XVFB_DAEMON_XVFB=5
fi
export MW_XVFB_DAEMON_XVFB
MWNO_FILE_LOCKING=true
export MWNO_FILE_LOCKING
MWNO_SIGNAL_CATCHING=true
export MWNO_SIGNAL_CATCHING
RASHOME="$enterprise120/$SOFTWAREPATH/ras/"
export RASHOME
LIBRARYPATH="$LIBDIR:$WCSCOMPONENTDIR:$PLUGINDIST/auth/secEnterprise:$enterprise120/$SOFTWAREPATH/crpe:$:$PLUGINDIST/desktop/CrystalEnterprise.Report:$enterprise120/$SOFTWAREPATH/ras:$
May optionally be set to MALLOCMULTIHEAP=heaps:n[,considersize]
where n is scaled to the number of CPUs (usually 2x).
Setting to MALLOCMULTIHEAP=1 enables system defaults.
setting MALLOCMULTIHEAP to 'considersize' fixes an AIX memory leak and significantly reduces the memory footprint.
env variable to fix the default cpu affinity
env variable to fix dlopen/dlclose behaviour to be more like ELF-based systems
aix thread stack overflow guarding : won't catch if overflow is more than 4k, but better than nothing
aix specific ulimit changes
unset the LANG so that we don't get the localized version of 'unlimited' if the localized system messages are installed.
undo that bug workaround from above
set the aix thread scope to system (1:1)
better core naming for aix 5
Check if memory windows is enabled in the kernal parameters
We will support memory windows, either through the "BOE120_HP_MEMWIN_ID" environment variable,
or through the "BusinessObjectsEnterprise120" memory window key in /etc/services.window
Use memory windows if available on HP-UX.
For both HPUX Itanium and PA-RISC
Reduce the number of arenas from 8 (default) to 1 (min) which solves memory blowup issue.
Enable the thread local cache to compensate.
http://www.docs.hp.com/en/B2355-60130/malloc.3C.html
mysql/lib"
if [ "$SOFTWARE" = "AIX" ]; then
LIBPATH="$LIBRARYPATH:$LIBPATH"
export LIBPATH
if [ x"$MALLOCMULTIHEAP" = x ]; then
CRConfig env variable for DCP
MALLOCMULTIHEAP="considersize"
export MALLOCMULTIHEAP
fi
RT_GRQ=ON
export RT_GRQ
LDR_CNTRL=IGNOREUNLOAD
export LDR_CNTRL
AIXTHREAD_GUARDPAGES=1
export AIXTHREAD_GUARDPAGES
LANGWAS="$LANG"
unset LANG
LC_ALLWAS="$LC_ALL"
unset LC_ALL
ulimit -S -m `ulimit -H -m` # max memory
LANG="$LANGWAS"; export LANG
unset LANGWAS
LC_ALL="$LC_ALLWAS"; export LC_ALL
unset LC_ALLWAS
AIXTHREAD_SCOPE="S"
export AIXTHREAD_SCOPE
Version=`uname -v`
Release=`uname -r`
if [ "$Version" -gt 4 ]; then
CORE_NAMING=ON
export CORE_NAMING
fi
AIXTHREAD_MUTEX_DEBUG=OFF
export AIXTHREAD_MUTEX_DEBUG
AIXTHREAD_COND_DEBUG=OFF
export AIXTHREAD_COND_DEBUG
AIXTHREAD_RWLOCK_DEBUG=OFF
export AIXTHREAD_RWLOCK_DEBUG
elif [ "$SOFTWARE" = "HP-UX" ]; then
if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
SHLIB_PATH="$LIBRARYPATH:$SHLIB_PATH:$JAVA_HOME/jre/lib/IA64W.0/server"
else
SHLIB_PATH="$LIBRARYPATH:$SHLIB_PATH:$JAVA_HOME/jre/lib/PA_RISC2.0/server"
fi
export SHLIB_PATH
MAX_MEM_WINDOW=`/usr/sbin/kctune | grep max_mem_window | awk '{print $2}'`
if [[ "$MAX_MEM_WINDOW" != "0" ]]; then
if [[ "$BOE120_HP_MEMWIN_ID" = "" && -r "/etc/services.window" && -x "/usr/bin/getmemwindow" ]]; then
BOE120_HP_MEMWIN_ID="`/usr/bin/getmemwindow BusinessObjectsEnterprise120`"
export BOE120_HP_MEMWIN_ID
fi
if [[ -x "/usr/bin/setmemwindow" ]]; then
if [[ "$BOE120_HP_MEMWIN_ID" != "" ]]; then
CE_CMDLINE_PREFIX="/usr/bin/setmemwindow -f -i $BOE120_HP_MEMWIN_ID "
fi
fi
export CE_CMDLINE_PREFIX
fi
export MARENA_OPTS=1:8
export MCACHE_OPTS=100:8:0
elif [ "$SOFTWARE" = "Linux" ]; then
LD_LIBRARY_PATH="$LIBRARYPATH:$perl/lib/5.8.0/i386-linux-thread-multi/CORE:$LD_LIBRARY_PATH"
export LD_LIBRARY_PATH
else
LD_LIBRARY_PATH="$LIBRARYPATH:$LD_LIBRARY_PATH"
export LD_LIBRARY_PATH
fi
CRCONFIGFILE="$java/CRConfig.xml"
if [ -f "$CRCONFIGFILE" ]; then
CRConfig11="$CRCONFIGFILE"
export CRConfig11
fi
if [ -d "$ODBC_HOME/locale" ]; then
set up the odbc symlink to work around:
The DataDirect SQL Server ODBC driver on UNIX will not function properly under a
locale other than "en_US" due to strong dependencies on their locale files.
MYLOCALE=`locale | grep LC_MESSAGES | sed -e 's|LC_MESSAGES="||g' -e 's|"$||g'`
if [ ! -d "$ODBC_HOME/locale/$MYLOCALE" ]; then
ln -s "$ODBC_HOME/locale/en_US" "$ODBC_HOME/locale/$MYLOCALE"
fi
fi
This was originally called TMPDIR, but now MainWin supports MW_TMPDIR, so we export MW_TMPDIR
ADAPT00506764 tracks the original issue with TMPDIR/Essbase Connectivity
MySQL now sets its TMPDIR in mysqlstartup.sh
set the tmp dir locally, if the value is not already set.
if [ x"$MW_TMPDIR" = x ]; then
if [ ! -d "$BOBJEDIR"/tmp ]; then
mkdir -p "$BOBJEDIR"/tmp
fi
MW_TMPDIR="$BOBJEDIR"/tmp
export MW_TMPDIR
fi
Comment this out to turn off custom Solaris memory allocator
if [ "$SOFTWAREPATH" = "solaris_sparc" ]; then
LD_PRELOAD="libhoard.so.1"
export LD_PRELOAD
Need to set up 64-bit specific library path so that 64-bit processes will
preload the 64-bit version of the memory allocator, and not the 32-bit version
LD_LIBRARY_PATH_64="$enterprise120/solaris_sparcv9"
export LD_LIBRARY_PATH_64
fi
setup the mysql env variables
if [ -d "$BOBJEDIR"/mysql ]; then
mysql env variables
MYSQL_UNIX_PORT="$BOBJEDIR"mysql/mysql.sock
export MYSQL_UNIX_PORT
fi
call env.sh from sub-directories (presumably from add-on installs)
for dir in "${BOBJEDIR?}/setup"/*
do
if [ -r "${dir?}/env.sh" ]; then
. "${dir?}/env.sh"
fi
done
fi
if [ X"$SOFTWARE" = "XHP-UX" ]; then
check for existence of u_flag, if it is, turn it back on.
if [ "$U_FLAG" = 1 ]; then
set -u
fi
fi -
Smart playlist doesn't include "Release Date" as a filter option
Why is "Release Date" not one of the options? I recently upgraded my hard drive and had to re-import all my podcasts, which meant they ALL dropped into the "Date Added is in the last 2 weeks" filter, which meant I couldn't synchronise my iPod! I had to go through and change the settings to be restrictive, but in such a way that I'll have to go back and change them all in another week or so.
If "Release Date" was in the filter options, this would simply not be an issue.With a solid backup/restore strategy you should never need to reimport anything.
I don't know the details of your playlist, but another way to have dealt with this might simply have been to temporarily uncheck the newly-imported episodes you didn't want going to the iPod.
tt2 -
Does anyone know if there is a release date for the X-Fi drivers for XP, I see the Vista drivers have been up for some time. Or are we XP users getting the shaft? It's going to take a lot of convincing for me to move over to Vista, I don't see DX0 as incenti've enough for me to shell out 200 bucks for an upgrade.
Did Creative forget about XP users of something, it's been a year since there was a driver, and it seems like they only fixed Vista drivers. I'm not looking to switch to Vista, unless I have to, there's no justification for it, it's as good as an OS like Windows ME, which only lasted a year or so.
-
Release Date for Leopard-Compatible ProTools? Help Please!
Hey,
I think this was the best forum to post this in. :$
I have a Yahama Motif 7 Keyboard ( USB & MIDI Outputs ) connected via MIDI to a Digidesign Driver, which is then connected to my computer via FireWire cable. Logic Studio cannot recognize my Digi002 Driver, and I know this is because I lack ProTools AudioCore Recognition ( or something like that :P ) software.
Does anyone know the expected release date of the version of ProTools that will be compatible with Leopard? Would the hassle to reverting my computer back to Tiger be less than waiting for the new ProTools to come out?
Thanks for any help you can give me.I have just upgraded in a quantum leap from a Quicksilver Mac to a Quad Core 3ghz Mac Pro, and swapped out my MBox 2 for a Factory 003. Despite promises to the contrary, the Mac Pro came without Tiger install disks, which I knew I would need. Just Leopard disks and the beast pre-installed. Looks great but of course my Pro Tools 7.3 install failed. I tried the tips to install that were on the digidesign and Mac forums, and still no joy. Apple Care... well, cared and I am now waiting for OEM Tiger 10.4.8 to arrive so I can do a clean erase and install. Hopefully this will then leave me able to plug in the 003 and start having a great deal of fun Apple Care has sworn blind and on pain of spam that the install will work, and that the firmware has not changed since they were shipping the Mac Pro with both Tiger and Leopard install disks. Here's hoping, 'cos I hear not a whisper about Leopard-compatible Pro Tools...
-
How do change hard drive creation date on OS 10.3.9 hard drive
Nuts, I installed my OS and configured everything without releasing that because the battery was dean the date had reverted back to 1976. Any way to change the hard drive creation date that shows up in GetInfo on my hard drive. Thanks
Hi, Brett -
That is often an effective solution, when OS 9 is available on another drive or machine, and all that is needed is the availability of Classic.
Unlike OSX, an OS 9 System Folder can be copied via a Finder copy process (drag and drop) and still retain full functionality.
However... if the receiving machine is OS 9 bootable, and the need is not only for Classic but also for a bootable OS 9 System Folder, copying such a folder from a different model Mac will rarely work. Unless specific steps are taken to perform a universal install of OS 9, an OS 9 install will be tailored to the machine it is installed upon - it will be model-specific to that machine. -
MSI Big Bang XPower II X79 release date
Whats the release date for this motherboard to the UNITED STATES?
MSI Big Bang XPower II X79 LGA 2011We don't know, we have nothing to do with MSI marketing. We are MSI product users the same as you helping each other with problems and have nothing to do directly with MSI. You would need to ask MSI. Question like that my typical answer is that you will know the release date after you see it for sale in the stores.
>> How to contact MSI <<
http://us.msi.com/service/PreSaleForm/
As a matter of fact if we knew the release dates of products like that we would post it in the forum to avoid those kind of questions all of the time. -
why is it that when I look through the new apps in the apps store in release date mode it returns to the first page after veiwing more information about some apps, I could be ten to twenty pages in and have it happen.
Also, I only speak and read English and although there are probably great apps for people from other nations, I don't want to wade through all the apps that I can't make use of. I expect that people of other nationalities or languages don't want to have to wade through every app that they can't make use of, is there not a way that alI users could filter by language?
I mean no offence to anyone but with a collection of hundreds of thousands of apps in all languages and the jump back to the begining after possibly being into the list by a number of pages I stop looking after awhile and I'm sure I've missed some excellent apps by doing so.Contact iTunes support : http://www.apple.com/support/itunes/contact/
-
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I am using follwoing string
<connectionStrings>
<add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
</connectionStrings>
Guide me What I do?Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us -
Standard report with po released date
hi mm experts,
request pl let me know is there any standard report which gives the po details and release indicator with released date of po.
pl help.
regards
SrihariHi
U can get Po release date per release code, use CDHDR and CDPOS tables in SE16
Enter transaction as ME28/ ME29N, Enter the range date,enter the object value as PO number (PO number should be 10 digit if the PO is not 10 digit, then add zero value for the prefix).
Then you can find the release date
Rest details u can find from ME2N report i.e Po details and Release indicator using dyanamic selection
Vishal... -
Purchase Order released date field and table name
Hi,
Please tell me the Purchase Order released date field and table name.
Regards
DeepakHi,
Table : EKKO.
Fields : FRGKE,FRGZU.
You can get release date of PO from CDHDR table.
give object value as your po number and check.dont forget to give leading zeros.
The udate will be date field and transaction will be me29n for relaesed po. -
Release date and release no of Scheduling Agreement
Hi All,
I have a problem with Scheduling agreement.
I have created a scheduling agreement with long validity period.
I maintained delivery schedules within that validity period.
I have generated forecast schedules. then using ME84, creating a releases.
the problem is occurs here.
it was not updating the release no and release date for the schedule line.
still it is showing a *yellow light* .
where is the problem and why it was not updating.
and can u please explain the process and significance of those lights.
Thanks in Advance.
Regards
KishoreVerify the table T161M has the values
kvewe = 'B'
kappl = 'EL'
druvo = 1
kschl = LHPA
as mentioned in the code.
The solution is add in SPAD the
Maybe you are looking for
-
Upgrade from 8.6 to 9.2
Hey there I have an old 'clam shell' iBook that has 8.6 and I want to upgrade it to 9.2 so I can use it outside for astrophotography. Everytime I try to install the 9.2 I get a message "This version of Mac OS can not be installed over the localized v
-
HT4890 My iCloud isn't showing any of my pictures. How can I add them?
My iCloud account does not copy any of my pictures. When I log into in on the computer there is not a folder for pictures. How can I add it?
-
Sine square function in formula node
Hello I need to generate a function I = Iz * sin^2(B) where B = (pi/2)*(V/70) Iz = 0, 0.1, 0.2, 0.3 ... 1.0 V = 1,2,3 ,4...135 I tried to do thi sin formula node. but cud not get it. See attchment. Nghtcwrlr ********************Kudos are alwayzz Welc
-
EVDRE's work for a period then stop working i.e. EVDRE is failing to retrieve data. Having captured the MDX query from the trace log - the MDX runs fine and within good time. However the WebExcel reports get no data. Restarting the COM+ objects wil
-
Messages taking 2 hours to process .
Hi our system is getting very slow with below warning every second The adapter failed to transmit message going to send port "SendPort" with URL "". It will be retransmitted after the retry interval specified for this Send Port. Details:"System.Tran