10.2.0.3 DBUA Error

I downloaded pat 5337014 in order to upgrade my 10.2.0.2 databases to 10.2.0.3
1. Originally installed Oracle 10.2.0.1 on RHEL 4 32-Bit without a database
2. Applied the 10.2.0.2 patch then created a DB
3. Successfully installed the 10.2.0.3 patch
4. Received an error when attempting to upgrade the DB using the DBUA assistant
Error: DBUA thinks this is a Rerun operation and is trying to connect to the database with oracle home /app/product/10.2.0/db_1. If you believe this is not a Rerun operation, remove the below file and invoke DBUA again.
/app/product/10.2.0/db_1/cfgtoollogs/dbua/logs/Welcome_orcl.txt
1. This is not a Rerun and this file does not exist
2. To make sure, I moved the /app/product/10.2.0/db_1/cfgtoollogs/dbua directory and tried it again, but received the same error.
Any suggestions? Has anyone else experienced this issue?

Is it your intent to run a 10.2.0.4 database on a lower version of ASM?
If not patch the ASM home and first.

Similar Messages

Dbua error wile upgrade from 9.5.0.5 to 10.2.0.4

I am upgrading from 9.2.0.5 to 10.2.0.4
i earlier tried to upgrade from 9.2.0.5 to 10.2.0.3, however it failed because of not applying patch-
i then cloned the instance and installed 10g software,companion products,10.2.0.4. patchset. however when u run dbua it gives a weird error->
ora 1507---database not mounted
dbua thinks this is rerun and is trying to connect to the database with orcle home"/u08/fadevdb/10g". If you beleive this is not a rerun, remove below file and rerun DBUA again
/u08/fadevdb/10g/cfgtoollogs/dbua/logs/Welcome_FADEV.tct"
However /u08/fadevdb/10g/cfgtoollogs/dbua/logs/Welcome_FADEV.txt" files does not exist
I checked the alert log
Additional information: 4087
Fri Dec 19 23:00:24 2008
ORA-205 signalled during: ALTER DATABASE MOUNT...
Fri Dec 19 23:43:40 2008
Beginning log switch checkpoint up to RBA http://0x2e.2.10, SCN: 0x0000.88b18ab0
Thread 1 advanced to log sequence 46
Current log# 1 seq# 46 mem# 0: /u04/fadevdata/log01a.dbf
Current log# 1 seq# 46 mem# 1: /u06/fadevdata/log1b.dbf
Sat Dec 20 00:04:22 2008
Completed checkpoint up to RBA http://0x2e.2.10, SCN: 0x0000.88b18ab0
^C$ tail -100 alert_FADEV.log
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as /u08/fadevdb/10g/dbs/arch
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.4.0.
System parameters with non-default values:
tracefiles_public = TRUE
processes = 200
sessions = 400
timed_statistics = TRUE
shared_pool_size = 301989888
large_pool_size = 8388608
java_pool_size = 54525952
streams_pool_size = 50331648
shared_pool_reserved_size= 30000000
sharedpool_reserved_min_alloc= 4100
nls_language = american
nls_territory = america
nls_sort = binary
nls_date_format = DD-MON-RR
nls_numeric_characters = .,
nls_comp = binary
nls_length_semantics = BYTE
control_files = /u04/fadevdata/cntrl01.dbf, /u06/fadevdata/cntrl02.dbf, /u03/fadevdata/cntrl03.dbf
db_block_checksum = TRUE
db_block_size = 8192
db_cache_size = 163577856
compatible = 9.2.0
log_buffer = 14282752
log_checkpoint_interval = 100000
log_checkpoint_timeout = 1200
db_files = 512
db_file_multiblock_read_count= 8
log_checkpoints_to_alert = TRUE
dml_locks = 10000
undo_management = AUTO
undo_tablespace = APPS_UNDOTS1
undo_retention = 1800
db_block_checking = FALSE
O7_DICTIONARY_ACCESSIBILITY= FALSE
session_cached_cursors = 200
utl_file_dir = /usr/tmp, /usr/tmp, /u02/fadevdb/9.2.0/appsutil/outbound/FADEV_fadevdb, /usr/tmp
job_queue_processes = 2
systemtrig_enabled = TRUE
cursor_sharing = EXACT
parallel_min_servers = 0
parallel_max_servers = 8
background_dump_dest = /u02/fadevdb/9.2.0/admin/FADEV_fadevdb/bdump
user_dump_dest = /u02/fadevdb/9.2.0/admin/FADEV_fadevdb/udump
max_dump_file_size = 20480
core_dump_dest = /u02/fadevdb/9.2.0/admin/FADEV_fadevdb/cdump
session_max_open_files = 20
optimizer_features_enable= 9.2.0
db_name = FADEV
open_cursors = 600
ifile = /u02/fadevdb/9.2.0/dbs/FADEV_fadevdb_ifile.ora
sortelimination_cost_ratio= 5
btree_bitmap_plans = FALSE
fastfull_scan_enabled = FALSE
query_rewrite_enabled = true
indexjoin_enabled = FALSE
sqlexecprogression_cost= 2147483647
likewith_bind_as_equality= TRUE
pga_aggregate_target = 1073741824
workarea_size_policy = AUTO
aq_tm_processes = 1
olap_page_pool_size = 4194304
PSP0 started with pid=3, OS id=28588
MMAN started with pid=4, OS id=28590
PMON started with pid=2, OS id=28586
DBW0 started with pid=5, OS id=28592
LGWR started with pid=6, OS id=28594
CKPT started with pid=7, OS id=28596
SMON started with pid=8, OS id=28598
RECO started with pid=9, OS id=28600
CJQ0 started with pid=10, OS id=28602
MMON started with pid=11, OS id=28604
MMNL started with pid=12, OS id=28606
Fri Dec 19 23:00:21 2008
ALTER DATABASE MOUNT
Fri Dec 19 23:00:21 2008
ORA-00202: control file: '/u04/fadevdata/cntrl01.dbf'
ORA-27086: unable to lock file - already in use
SVR4 Error: 11: Resource temporarily unavailable
Additional information: 8
Additional information: 4087
Fri Dec 19 23:00:24 2008
ORA-205 signalled during: ALTER DATABASE MOUNT...
Fri Dec 19 23:43:40 2008
Beginning log switch checkpoint up to RBA http://0x2e.2.10, SCN: 0x0000.88b18ab0
Thread 1 advanced to log sequence 46
Current log# 1 seq# 46 mem# 0: /u04/fadevdata/log01a.dbf
Current log# 1 seq# 46 mem# 1: /u06/fadevdata/log1b.dbf
Sat Dec 20 00:04:22 2008
Completed checkpoint up to RBA http://0x2e.2.10, SCN: 0x0000.88b18ab0
I then found that ctr101.dbf had permissions of "rw-r-r". I gave 777 permission.aborted dbua and again started dbua. However it still gives the same problem.
If you note the alert log...then 10g is trying to start while 9i is already running.i then shutdown and started 9i again and then started dbua...however it again gives the same error.
How do i resolve it?

Hi,
I would quickly identify some of the errors that I'm seeing in the log:
ORA-01034: ORACLE not available
This is probably occuring due to invalid entries in /etc/oratab and /var/opt/oracle/oratab, where ORACLE_HOME and ORACLE_SID are not properly defined. This could also be due to invalid entries within the listener file. Further to this, you may try to read through the following Metalink Note to resolve this issue:
https://metalink.oracle.com/metalink/plsql/f?p=130:14:2840960078839325001::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,302510.1,1,1,1,helvetica
A similar issue is being discussed here ORA-27086: unable to lock file over NFS -- but it's NOT Netapp!
SVR4 Error: 11: Resource temporarily unavailable
This is probably over-writing some already existing/production control files. Try pointing CONTROL_FILES parameter within init.ora to point to a new location. Once this is done you must now change the location of your datafiles, and finally change the location of your redo log files.
ORA-205 signalled during: ALTER DATABASE MOUNT
This again is falling in succession to the errors being popped up against the control files. Try to start the database without mounting it and check for the control files in v$parameter2.
Lastly, you may also want to check if the database is starting from the spfile instead of the pfile. If it is, alter it to start from the pfile.
I hope this helps.
Regards,
Naveed.

11.1.0.6.0 - 11.1.0.7 dbua error while upgrading

hello all i'm attempting to upgrade 11.1.0.6.0 to 11.1.0.7 and once in dbua i'm at upgrade process 85%, and i'm receiving this error:
database upgrade assistant:
ORA-04043: Object XDB_DATASTORE_PROC does not exist , ignore | Abort
i'm not too sure what i should do at this point, any help is appreciated
this is a linux 32bit machine/db

Welcome to the forums !
Pl see MOS Doc 360907.1 (catupgrd.sql gives error on XDB_DATASTORE_PROC ORA-4043)
HTH
Srini

DBUA errors out after collecting server information

Hi,
We are in the process of upgrading Oracle Database from 9i to 11g on AIX 6.1. After installing the Oracle Software 11g (11.2.0.1) we try to run the DBUA but after showing the screen collecting server information a blank page appears (with no error code) after which the DBUA stops.
Please any hints or any comments.
Thanks.

There are a few oracle notes which may help :
DBUA Fails With a Screen Showing 'Null' [ID 1285052.1]
Complete Checklist for Manual Upgrades to 11gR2 [ID 837570.1]
11.2.0.1 Catupgrd.sql Hangs While Running Procedure POPULATE_DBID_AUDIT [ID 1062993.1]
Best Regards
mseberg
Edited by: mseberg on Aug 10, 2011 8:02 AM

DBUA Error - 8.1.7.4 10.2.0.3

I am running DBAU to upgrade a DB from 8.1.7.4 to 10.2.0.3. I am getting a strange error message. Right after DBUA asks me which database to upgrade, it then does it gathering of the DB information. I get a dialog box that comes up with the red bell, and the number 0 (that's a zero), with a "OK" button to click. There is no other error message of any kind, and nothing of value in the dbua logfiles. When I click the OK button, it goes back to the selection DB to upgrade screen. Any ideas? I have not had this happen on my four previous DB upgrades.

Hello,
you have a problem with one of your parameters in your spfile or pfile.
It cant be parsed from the dbua-parser. You can find out which
parameter is wrong by looking in the trace file (the last parameter shown is ok, you have a problem with the parameter following this one -> compare trace file with your spfile). There is a Metalink Note for this: 376270.1
Best regards,
Alexander Bertram

Oracle Upgrade (DBUA) error

Hi
Which execuring the command "dbua" for upgrade, I get the following error
Exception in thread "main" java.security.AccessControlException: access denied (java.lang.RuntimePermission setIO)
        at java.security.AccessControlContext.checkPermission(Unknown Source)
        at java.security.AccessController.checkPermission(Unknown Source)
        at java.lang.SecurityManager.checkPermission(Unknown Source)
        at java.lang.System.checkIO(Unknown Source)
        at java.lang.System.setErr(Unknown Source)
        at oracle.ops.mgmt.trace.Trace.enableLogging(Trace.java:751)
        at oracle.ops.mgmt.trace.Trace.enableLogging(Trace.java:720)
        at oracle.sysman.assistants.dbma.backend.CompManager.setLoggings(CompManager.java:3390)
        at oracle.sysman.assistants.dbma.backend.CompManager.initialize(CompManager.java:297)
        at oracle.sysman.assistants.dbma.ui.UICompManager.initialize(UICompManager.java:141)
        at oracle.sysman.assistants.dbma.Dbma.execute(Dbma.java:90)
        at oracle.sysman.assistants.dbma.Dbma.statusMain(Dbma.java:177)
        at oracle.sysman.assistants.dbma.Dbma.main(Dbma.java:158)
let me how to get rid of this problem..
Thanks in advance !
Regards
Madhu

Hi Madhusudhan,
Did you run dbua with ora<sid> user? It is clearly a user rights issue.
Regards,
János

DBUA issue with timezones when upgrading 11.2.0.2 to 11.2.0.3

My task is to migrate an Oracle 11.2.0.2 test database (source database) to 11.2.0.3. The source database hat timezone files (RDBMS DST) version 18 installed. OS ist Windows 2008 R2.
I installed the 11.2.0.3 patchset into a separate Oracle Home (target) to perform an "Out-of-place"-upgrade. According to Note 1358166.1 I also installed the corresponding timezone files (version 18) into the target Oracle Home by applying the corresponding patch set using Opatch. The patch succeeded, and new files were copied into the \oracore\zoneinfo subdirectory under the target's Oracle Home. The files included a file named "readme_18.txt". As there is no database under the target Oracle Home there is no way to do the rest of the installation steps as described in Note 977512.1 (i.e. DBMS_DST.UPGRADE_DATABASE)
When I started the DBUA GUI from the Windows Start Menu (the version from the target Oracle Home), the source database was found, however during the analysis phase I got an error message stating that the timezone files on the target database have a lower version that the timezone files of the source database. The error in the trace.log (subdirectory of ORACLE_BASE\cfgtoollogs\dbua) reads:
*[PreMigrationCheck.checkTZVersion:101] new oracle home TZ file version 14 and source oracle home TZ file version 18*
To ensure that this problem is not resolved with one of the patchsets, I deinstalled the targed Oracle Home, reinstalled the 11.2.0.3 release, applied the latest patchset (Patch 13) using OPatch and then applied the timezone files version 18 using OPatch: Same error as before.
I started reading tons of documents, but I found nothing about this error in the forum or other places in the internet. So I started experimenting and I found a workaround: In the \oracore\zoneinfo subdirectory I renamed
- readme.txt to readme_14.txt and
- readme_18.txt to readme.txt
When I started DBUA again, the error did not return and I was able to migrate.
Question: Did I use a suitable workaround, or is there a better way to circumvent the DBUA error? Maybe I missed an important step.
Regards
Christoph

I would suggest that you open an SR with Support on this issue
HTH
Srini

Upgrade database from 10.2.0.1.0 to 11.1.0.... I am not abble to upgrade.

SQL> spool on
SQL> spool 'preupgrade1.log'
SQL> startup upgrade;
ORA-32004: obsolete and/or deprecated parameter(s) specified
ORACLE instance started.
Total System Global Area 602619904 bytes
Fixed Size 1348956 bytes
Variable Size 226495140 bytes
Database Buffers 369098752 bytes
Redo Buffers 5677056 bytes
Database mounted.
Database opened.
SQL> @E:\ORACLE11G\PRODUCT\11.1.0\product\11.1.0\db_1\RDBMS\ADMIN\utlu111i.sql;
ERROR:
ORA-04023: Object SYS.STANDARD could not be validated or authorized
DECLARE
ERROR at line 1:
ORA-04023: Object SYS.STANDARD could not be validated or authorized
ERROR:
ORA-04023: Object SYS.STANDARD could not be validated or authorized
SQL> select count(*) from obj$ where owner#=0 AND type#=2 and name='PUIU$DBUA;
ERROR:
ORA-01756: quoted string not properly terminated
SQL> select count(*) from obj$ where owner#=0 AND type#=2 and name='PUIU$DBUA';
COUNT(*)
0
SQL> @/home/oracle/u01/app/oracle/product/11.1.0/db_1/rdbms/admin/utlrp.sql
SP2-0310: unable to open file "/home/oracle/u01/app/oracle/product/11.1.0/db_1/r
dbms/admin/utlrp.sql"
SQL>
SQL> @E:\ORACLE11G\product\11.1.0\product\11.1.0\db_1\rdbms\admin\utlrp.sql;
SELECT dbms_registry_sys.time_stamp('utlrp_bgn') as timestamp from dual
ERROR at line 1:
ORA-04023: Object SYS.DBMS_REGISTRY_SYS could not be validated or authorized
DOC> The following PL/SQL block invokes UTL_RECOMP to recompile invalid
DOC> objects in the database. Recompilation time is proportional to the
DOC> number of invalid objects in the database, so this command may take
DOC> a long time to execute on a database with a large number of invalid
DOC> objects.
DOC>
DOC> Use the following queries to track recompilation progress:
DOC>
DOC> 1. Query returning the number of invalid objects remaining. This
DOC> number should decrease with time.
DOC> SELECT COUNT(*) FROM obj$ WHERE status IN (4, 5, 6);
DOC>
DOC> 2. Query returning the number of objects compiled so far. This number
DOC> should increase with time.
DOC> SELECT COUNT(*) FROM UTL_RECOMP_COMPILED;
DOC>
DOC> This script automatically chooses serial or parallel recompilation
DOC> based on the number of CPUs available (parameter cpu_count) multiplied
DOC> by the number of threads per CPU (parameter parallel_threads_per_cpu).
DOC> On RAC, this number is added across all RAC nodes.
DOC>
DOC> UTL_RECOMP uses DBMS_SCHEDULER to create jobs for parallel
DOC> recompilation. Jobs are created without instance affinity so that they
DOC> can migrate across RAC nodes. Use the following queries to verify
DOC> whether UTL_RECOMP jobs are being created and run correctly:
DOC>
DOC> 1. Query showing jobs created by UTL_RECOMP
DOC> SELECT job_name FROM dba_scheduler_jobs
DOC> WHERE job_name like 'UTL_RECOMP_SLAVE_%';
DOC>
DOC> 2. Query showing UTL_RECOMP jobs that are running
DOC> SELECT job_name FROM dba_scheduler_running_jobs
DOC> WHERE job_name like 'UTL_RECOMP_SLAVE_%';
DOC>#
DECLARE
ERROR at line 1:
ORA-04023: Object SYS.STANDARD could not be validated or authorized
SELECT dbms_registry_sys.time_stamp('utlrp_end') as timestamp from dual
ERROR at line 1:
ORA-04023: Object SYS.DBMS_REGISTRY_SYS could not be validated or authorized
DECLARE
ERROR at line 1:
ORA-04023: Object SYS.STANDARD could not be validated or authorized
DOC> The following query reports the number of objects that have compiled
DOC> with errors (objects that compile with errors have status set to 3 in
DOC> obj$). If the number is higher than expected, please examine the error
DOC> messages reported with each object (using SHOW ERRORS) to see if they
DOC> point to system misconfiguration or resource constraints that must be
DOC> fixed before attempting to recompile these objects.
DOC>#
OBJECTS WITH ERRORS
0
DOC> The following query reports the number of errors caught during
DOC> recompilation. If this number is non-zero, please query the error
DOC> messages in the table UTL_RECOMP_ERRORS to see if any of these errors
DOC> are due to misconfiguration or resource constraints that must be
DOC> fixed before objects can compile successfully.
DOC>#
ERRORS DURING RECOMPILATION
0
ERROR:
ORA-04023: Object SYS.STANDARD could not be validated or authorized
DECLARE
ERROR at line 1:
ORA-04023: Object SYS.STANDARD could not be validated or authorized
BEGIN dbms_registry_sys.validate_components; END;
ERROR at line 1:
ORA-04023: Object SYS.STANDARD could not be validated or authorized
ERROR:
ORA-04023: Object SYS.STANDARD could not be validated or authorized
SQL>
Edited by: user11958935 on Aug 12, 2010 2:21 AM
In this issue what happened their? and what is the actual issue ? Pls provide the answer in step by step wise

You need to run this script while using the 10g binaries. See http://download.oracle.com/docs/cd/B28359_01/server.111/b28300/upgrade.htm#UPGRD12395
HTH
Srini

Problem during Upgrade 10.2.0.4

Hi Gurus !!!
During upgrade from 9.2 to 10.2 we have install 10.2.0.4 patches and now we are ready to call dbua (upgrade assistant).
When we call dbua an error occurs :
./dbua
Error message
Failed to load Main Class: oracle.sysman.assistants.dbma.Dbma
We've check enviroments variables and all are Ok.
Any ideas ?
Thanks in advance.

Hi Xavier Canals Asin,
You also need to set the JAVA_HOME environment variable.
For unix after login to the oraSID user
setenv JAVA_HOME /opt/java1.4(java location may differ check in ur system)
then check the version of the java with command java -version
if still you are getting the error
check the metalink
Exception in thread "main" java.lang.NoClassDefFoundError [ID 359067.1]
If still it is not working please reply back to me.
Thanks,
Chaitanya

Version 1.1.0.23 freezing up when accessing recently upgraded 10.2.0.2 db

I still have old and new versions installed, and I noticed that the new version will freeze when I access one of my 10.2.0.2 databases (recently upgraded from 9.2.0.6). When I try against other 10.2.0.2 databases I don't see the freeze.
I can switch to the old version of SQLDeveloper (1.0.0.15.57) and connect to the same account / database and not have any freeze issues. Plus, my other tools appear to be functioning normally.
At first I thought that the migration of previous settings in SQLDeveloper was the culprit, but I've tested a clean install without migration and have the same problem. It appears to be something with the upgraded database, but I didn't have any dbua errors that would indicate an issue with the upgrade.
Ideas?
Thanks,
Kevin

I entered the application, connected to the problem instance, opened up the tree view for tables, and waited about 20 seconds, then pressed ctrl-break.
Output follows:
WARNING: Unknown directive: SetSkipJ2SDKCheck
Using oracle.home=C:\sqldeveloper
Using ide.user.dir=null
Addin: Translator PlSql is trying to register a input type (.plsql) which confli
cts with translator PlSql who already using this input type
Full thread dump Java HotSpot(TM) Client VM (1.5.0_05-b05 mixed mode):
"ProgressBarThread" prio=5 tid=0x03e414f0 nid=0xf20 runnable [0x0576f000..0x0576
fb68]
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at oracle.net.ns.Packet.receive(Unknown Source)
at oracle.net.ns.DataPacket.receive(Unknown Source)
at oracle.net.ns.NetInputStream.getNextPacket(Unknown Source)
at oracle.net.ns.NetInputStream.read(Unknown Source)
at oracle.net.ns.NetInputStream.read(Unknown Source)
at oracle.net.ns.NetInputStream.read(Unknown Source)
at oracle.jdbc.driver.T4CMAREngine.unmarshalUB1(T4CMAREngine.java:1104)
at oracle.jdbc.driver.T4CMAREngine.unmarshalSB1(T4CMAREngine.java:1075)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:480)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.
java:215)
at oracle.jdbc.driver.T4CCallableStatement.fetch(T4CCallableStatement.ja
va:1037)
at oracle.jdbc.driver.OracleResultSetImpl.close_or_fetch_from_next(Oracl
eResultSetImpl.java:291)
- locked <0x13152308> (a oracle.jdbc.driver.T4CConnection)
at oracle.jdbc.driver.OracleResultSetImpl.next(OracleResultSetImpl.java:
213)
- locked <0x10160000> (a oracle.jdbc.driver.OracleResultSetImpl)
at oracle.dbtools.raptor.navigator.ObjectQueryInstance.executeQuery(Obje
ctQueryInstance.java:76)
at oracle.dbtools.raptor.navigator.xml.XmlFolderInstance.getChildren(Xml
FolderInstance.java:97)
at oracle.dbtools.raptor.navigator.xml.XmlFolderInstance.listChildren(Xm
lFolderInstance.java:57)
at oracle.dbtools.raptor.navigator.ObjectFilter$1Loader.doWork(ObjectFil
ter.java:134)
at oracle.ide.dialogs.ProgressRunnable.run(ProgressRunnable.java:159)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:553)
at java.lang.Thread.run(Thread.java:595)
"Timer-4" prio=7 tid=0x03aa8768 nid=0x34c in Object.wait() [0x0586f000..0x0586fc
68]
at java.lang.Object.wait(Native Method)
- waiting on <0x1327bef0> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:474)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x1327bef0> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"Timer-3" prio=7 tid=0x046748c8 nid=0x820 in Object.wait() [0x0566f000..0x0566fd
68]
at java.lang.Object.wait(Native Method)
- waiting on <0x13252f08> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:474)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x13252f08> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"WeakDataReference polling" prio=2 tid=0x03e1de58 nid=0xc8c in Object.wait() [0x
0556f000..0x0556f9e8]
at java.lang.Object.wait(Native Method)
- waiting on <0x13209b48> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
- locked <0x13209b48> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
at oracle.ide.util.WeakDataReference$Cleaner.run(WeakDataReference.java:
88)
at java.lang.Thread.run(Thread.java:595)
"WaitCursorTimer" daemon prio=5 tid=0x04a5f498 nid=0x930 in Object.wait() [0x053
6f000..0x0536fc68]
at java.lang.Object.wait(Native Method)
- waiting on <0x13152700> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:474)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x13152700> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"IconOverlayTracker Timer" prio=5 tid=0x03a70048 nid=0x1b8 in Object.wait() [0x0
516f000..0x0516fae8]
at java.lang.Object.wait(Native Method)
- waiting on <0x12bcb438> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:474)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x12bcb438> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"Timer-0" prio=5 tid=0x03dcde48 nid=0x674 in Object.wait() [0x0426f000..0x0426fc
e8]
at java.lang.Object.wait(Native Method)
- waiting on <0x12bb1de0> (a java.util.TaskQueue)
at java.util.TimerThread.mainLoop(Timer.java:509)
- locked <0x12bb1de0> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"TimerQueue" daemon prio=5 tid=0x039c7498 nid=0xf54 in Object.wait() [0x0446f000
..0x0446fb68]
at java.lang.Object.wait(Native Method)
- waiting on <0x12842920> (a javax.swing.TimerQueue)
at javax.swing.TimerQueue.run(TimerQueue.java:233)
- locked <0x12842920> (a javax.swing.TimerQueue)
at java.lang.Thread.run(Thread.java:595)
"AWT-EventQueue-0" prio=7 tid=0x03a70cd8 nid=0xd78 in Object.wait() [0x0436f000.
.0x0436fbe8]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:474)
at java.awt.EventQueue.getNextEvent(EventQueue.java:345)
- locked <0x12820a90> (a java.awt.EventQueue)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
read.java:189)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:163)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:153)
at java.awt.Dialog$1.run(Dialog.java:515)
at java.awt.Dialog.show(Dialog.java:536)
at java.awt.Component.show(Component.java:1300)
at java.awt.Component.setVisible(Component.java:1253)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:294)
at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:188)
at oracle.ide.dialogs.ProgressRunnable.start(ProgressRunnable.java:119)
at oracle.dbtools.raptor.navigator.ObjectFilter.getChildren(ObjectFilter
.java:170)
at oracle.ideimpl.explorer.BaseTreeExplorer.addChildren(BaseTreeExplorer
.java:346)
at oracle.ideimpl.explorer.BaseTreeExplorer.open(BaseTreeExplorer.java:8
63)
at oracle.ideimpl.explorer.BaseTreeExplorer$3.run(BaseTreeExplorer.java:
1774)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
read.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
"AWT-Windows" daemon prio=7 tid=0x03c0e068 nid=0xb64 runnable [0x0416f000..0x041
6fce8]
at sun.awt.windows.WToolkit.eventLoop(Native Method)
at sun.awt.windows.WToolkit.run(WToolkit.java:269)
at java.lang.Thread.run(Thread.java:595)
"AWT-Shutdown" prio=5 tid=0x0392a550 nid=0x82c in Object.wait() [0x0406f000..0x0
406fd68]
at java.lang.Object.wait(Native Method)
- waiting on <0x12822de0> (a java.lang.Object)
at java.lang.Object.wait(Object.java:474)
at sun.awt.AWTAutoShutdown.run(AWTAutoShutdown.java:259)
- locked <0x12822de0> (a java.lang.Object)
at java.lang.Thread.run(Thread.java:595)
"Java2D Disposer" daemon prio=5 tid=0x039bbac8 nid=0xec8 in Object.wait() [0x03f
6f000..0x03f6f9e8]
at java.lang.Object.wait(Native Method)
- waiting on <0x12822e68> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
- locked <0x12822e68> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
at sun.java2d.Disposer.run(Disposer.java:107)
at java.lang.Thread.run(Thread.java:595)
"Low Memory Detector" daemon prio=5 tid=0x00e44340 nid=0xb74 runnable [0x0000000
0..0x00000000]
"CompilerThread0" daemon prio=5 tid=0x00e42f18 nid=0xb5c waiting on condition [0
x00000000..0x0366f84c]
"Signal Dispatcher" daemon prio=5 tid=0x00e422a0 nid=0xc04 waiting on condition
[0x00000000..0x00000000]
"Finalizer" daemon prio=8 tid=0x00e38b98 nid=0xbd8 in Object.wait() [0x0346f000.
.0x0346fce8]
at java.lang.Object.wait(Native Method)
- waiting on <0x1279c840> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
- locked <0x1279c840> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
"Reference Handler" daemon prio=5 tid=0x00e380e8 nid=0x4a8 in Object.wait() [0x0
336f000..0x0336fc68]
at java.lang.Object.wait(Native Method)
- waiting on <0x1279c8c0> (a java.lang.ref.Reference$Lock)
at java.lang.Object.wait(Object.java:474)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
- locked <0x1279c8c0> (a java.lang.ref.Reference$Lock)
"main" prio=5 tid=0x00858cd8 nid=0xe3c waiting on condition [0x00000000..0x0012f
b7c]
"VM Thread" prio=5 tid=0x00e35718 nid=0xa9c runnable
"VM Periodic Task Thread" prio=5 tid=0x00e45520 nid=0x5ac waiting on condition

Database 11g upgrade - disable database vault option

I am upgrading from Oracle 10.2.0.4 to 11g release 2 (Solaris 10) and I continue to get the following error:
Database Vault option is enableed in Oracle Home:
"/ora01/product/11.2.0/db_1". This option needs to be disabled prior to upgrade.I followed the fix from Oracle Support (11G DBUA Error: Database Vault option is enabled in Oracle Home: “” [ID 975140.1] )
I get this error:
make -f ins_rdbms.mk dv_off ioracle
-bash: make: command not found
Any idea?

schavali wrote:
Pl try by setting PATH variable to
PATH=/usr/bin:/usr/local/bin:/usr/ucb:/etc:/usr/lib:/usr/sbin:/usr/ccs/bin:/ora01/product/11.2.0/db_1:.
export PATH
Srini,
Yes I did that and here is what I got:
-bash-3.00$ pwd
/ora01/product/11.2.0/db_1/rdbms/lib
-bash-3.00$ make -f ins_rdbms.mk dv_off ioracle
make: Warning: Can't find `/rdbms/lib/env_rdbms.mk': No such file or directory
make: Fatal error in reader: ins_rdbms.mk, line 2: Read of include file `/rdbms/lib/env_rdbms.mk' failed
-bash-3.00$

Error in DBUA while upgrading oracle 9.2 - 10.2 with sistem copy

Hi experts!
we are in a critical upgrade project, and faced the following
error while performing a system copy/upgrade of oracle version
from 9.2 to 10.2 (windows 2000 32bit to win 2003 64bits) acording to the procedure indicated in
sapnote: Note 932722 - Upgrade to Oracle 10.2 during a database copy
we checked all the prerequisites, followed all the steps with
sucess, until the part where DBUA was invocated.
in that step the following java exception was launched:
output from the remotedbua.pl script atached in the note 932722:
Sun Oct 11 04:53:10 2009 - verifying file locations.
Instance created.
Sun Oct 11 04:53:28 2009 - new TIO service created.
Sun Oct 11 04:53:38 2009 - database started.
Sun Oct 11 04:53:38 2009 - starting database upgrade. AQUI
J:/oracle/MAE/102/assistants/dbua/jlib/dbma.jar,
J:/oracle/MAE/102/assistants/dbua/jlib/dbma.jar.0
J:/932722/Upgrade10g64bit_v3/dbma.jar,
J:/oracle/MAE/102/assistants/dbua/jlib/dbma.jar
Exception in thread "main" java.lang.NoClassDefFoundError:
oracle/sysman/assistants/util/em/ManagementOptionsPage
        at oracle.sysman.assistants.dbma.ui.UICompManager.<init>
(UICompManager.java:153)
        at oracle.sysman.assistants.dbma.Dbma.getCompManager
(Dbma.java:154)
        at oracle.sysman.assistants.dbma.Dbma.execute(Dbma.java:98)
        at oracle.sysman.assistants.dbma.Dbma.statusMain(Dbma.java:199)
        at oracle.sysman.assistants.dbma.Dbma.main(Dbma.java:180)
Sun Oct 11 04:53:39 2009 - Error: database upgrade failed.
dbua, while loading, cant find all the necessary classes, in
the dbma.jar archive. that is suplied in the note.
we tried to run dbua in -verbose mode and it seems that
the problem is not in java classpath, since the dbua.bat
loads sucessfully other classes present in dbma.jar, but not
all, giving the exception that indicates that not all of them
are presente in the dbma.jar file, suplied int the note!
[Loaded oracle.sysman.assistants.dbma.ui.SPFilePage from
file:/J:/oracle/MAE
[Loaded oracle.sysman.assistants.dbma.ui.BackupPage from
file:/J:/oracle/MAE
Exception in thread "main" java.lang.NoClassDefFoundError:
oracle/sysman/***
        at oracle.sysman.assistants.dbma.ui.UICompManager.<init>
(UICompManag
        at oracle.sysman.assistants.dbma.Dbma.getCompManager
(Dbma.java:154)
   at oracle.sysman.assistants.dbma.Dbma.execute(Dbma.java:98)
        at oracle.sysman.assistants.dbma.Dbma.statusMain(Dbma.java:199)
        at oracle.sysman.assistants.dbma.Dbma.main(Dbma.java:180)
[Loaded java.lang.Shutdown from J:\oracle\MAE\102\jdk\jre\lib\rt.jar]
[Loaded java.lang.Shutdown$Lock from J:\oracle\MAE\102
\jdk\jre\lib\rt.jar]
we also tried to execute the dbua.bat, and the same error insues.
we cant pass to the next upgrade step, until this critical echo is
resolved!
Please Advise!! Best Regards Ricardo

Hi Mark, first of all thanks for the reply.
after talking to sap support, we came to the conclusion that the problem was on the dbma.jar file
atached to the note 932722.
the file is missing java classes, so the dbua doenst work, because, the remotedua.pl script,
copies the file dbma.jar of the note, to the original one in the oracle instalation.
it renames the original to ".0", so if you run the script two times, the original is lost.
the problem was solved by requesting another dbma.jar file from sap.
sap probably will correct note 932722, in order to update the attached dbma.jar file to a good one.
Best Regards,
Ricardo Caramona

DBUA is throwing below error in step 1

Hi,
I am trying to upgrade 9.2.0.7 to 10.2.0.
DBUA is throwing below error in step 1:
There is an error in creating the following process: C:\oracle\ora92\bin\sqlplus -s/nolog
The error is: createprocess:C:\oracle\ora92\bin\sqlplus -s/nolog
error:193
I can login as sysdba ,using C:\oracle\ora92\bin\sqlplu for both 9i as well as 10g home
i did set oracle_home to C:\oracle\ora92, using command prompt.
Please suggest what needs to be done. Thanks
Ron

What you have written does not compute.
How many Oracle homes do you have?
If more than 1 ... explain how you can log into 9i and 10g using a single home?
Please explain in detail what document you are following (post a link) and what steps you have taken based on the document.
And why are you upgrading to software that will begin desupport in four weeks? If you are going to put in the effort why not at least get a system that will be fully supported when you are done?

DBUA rerun error

I keep getting the follow error trying to upgrade my DB.
DBUA thinks this is a Rerun operation and is trying to connect to the database with oracle home /oracle/m11g/db11g. If you believe this is not a Rerun operation, remove the below file and invoke DBUA again. /oracle/m11g/cfgtoollogs/dbua/logs/Welcome_oem11g.txt
Where is this file ? I cannot find it anywhere..

Hi,
Then why the location for you is showing "/oracle/m11g/cfgtoollogs/dbua/logs/" instead of "/oracle/m11g/db11g/cfgtoollogs/dbua/logs/" ?
Or did you meant above is the typo?
Anyways what is the current state of the database that needed to be upgraded? And what is the entire error message you are getting.
1) Is your database started with startup upgrade?
If no then please do so and re run dbua
and if yes then
you can do below cleanup.
a. In the $ORACLE_ HOME/cfgtoollogs/dbua/<$ORACLE_SID> of database being upgraded,
there are multiple upgrade directories (i.e. upgrade, upgrade0, ...., upgradeN)
b. Go to the directory $ORACLE_HOME/cfgtoollogs/dbua/<$ORACLE_SID>
c. Move all the upgrade* directory to some other location.
d. Re-run the DBUA
Regards
Anurag Tibrewal

Java.lang.NoClassDefFound Error while invoking dbua(9.2.0.8)on Sun Solaris.

Hi Friends,
I had installed Oracle 9.2.0.1(software alone) on Sun solaris box and then i installed the patchset 9.2.0.8 on the same Oracle 9i Home.It's installed.
But when i try to run dbca to cretae a database from $ORACLE_HOME/bin it throws the error:
java.lang.NoClassDefFoundError
i had set the PATH,ORACLE_SID,ORACLE_HOME,LD_LIBRARY_PATH but still getting the error.
Please suggest a fix.
Regrads,
Arun

Do you have JAVA_HOME set in your environment?
What's the result of
env
Make sure DBCA is calling the java under $ORACLE_HOME not from other installation.

10.2.0.3 DBUA Error

Similar Messages

Maybe you are looking for