10.2.0.3 grid control linux administration not working
I've got 10.2.0.3 grid control running on Suse Linux 9 32bit, and a 10.2.0.2 Suse Linux 9 64bit agent. There's no problem with this config, except I can't get the administration page to work.
When I click on a server target and then go to the administration page, I get :
"To administer a host through Enterprise Manager, you will need to install the following scripts. Follow the steps below and click 'Finish' button when you are done.
Step 1 Install EM Wrapper Scripts from http://oss.oracle.com
Step 2 Install the SUSE patch for YAST from http://oss.oracle.com
I've done both of these things, installed the yast package and used the new ag_tty perl script. Even rebooted the server and restarted the agent - no joy, it still keeps insisting that I do the above. Pressing finish does nothing.
Do I need to wait for the 10.2.0.3 64bit agent for this, or am I missing something?
Bug:
Workaround or Resolution
The patch Patch 5858325 is now available in METALINK.
This patch is for Generic Platforms and must be applied in the Grid Control (OMS) ORACLE_HOME.
Please follow the instructions given in the README to apply the patch.
Note: if you have several OMS, you need to apply the patch in each OMS ORACLE_HOME.
Similar Messages
-
Grid Control url is not loading 10gR2
Team,
DB = 10.2.0.1
OS = RHLE 4
Grid = 10.2.0.1
I have installed Grid Control on the same machine where my database running. I followed all the steps and its successful. After all, my grid control url is not loading..
The following URL shows
http://localhost.localdomain:4889/em
ERROR:
503 Service Unavailable
Servlet error: Service is not initialized correctly. Verify that the repository connection information provided is correct.
I have started all the process successfully. Could you please anyone help me out on this issue ?
Thanks,
HariHarry wrote:
Team,
DB = 10.2.0.1
OS = RHLE 4
Grid = 10.2.0.1
I have installed Grid Control on the same machine where my database running. I followed all the steps and its successful. After all, my grid control url is not loading..
The following URL shows
http://localhost.localdomain:4889/em
ERROR:
503 Service Unavailable
Servlet error: Service is not initialized correctly. Verify that the repository connection information provided is correct.
I have started all the process successfully. Could you please anyone help me out on this issue ?
Thanks,
HariFrom what machine are you trying to run your browser?
localhost always means the local machine. It is not routed to some other server. -
The music buttons in the control centre are not working ,What should i do to get them working
the soft music buttons in control centre are not working,
what should i do to get them workingTry trashing apple.com.dashboard.plist from preference library and restarting Mac.
Quit all applications.
Open Finder- Click the left most icon on the Dock.
Holding option key click the Go menu from the menu bar.
Select Library and then Preference folder.
Select apple.com.dashboard.plist and move it to trash.
Restart Mac. -
Control-clicking does not work in Finder
Ever since installing the 10.4.5 update, control-clicking does not work in Finder. When I try to do it, Finder automatically restarts itself. This happens in any Finder window and on the desktop itself. Whether I am control-clicking an Application icon or trying to 'Get Info' on a file, Finder restarts itself. I repaired permissions and it did not fix the problem.
Any idea on how to fix this? Thanks a lot!
David
Edit: Nevermind. I fixed it by deleting the JIMZip.plugin file in my Contexual Menu folder. I found the answer in another thread. I apologize for searching after I created this thread.David,
Can you identify any corrupted or incompatible files in either your Macintosh HD/Library/Contextual Menu Items folder, or your Macintosh HD/Users/yourhomefolder/Library/Contextual Menu Items folder?
If so you may be able to uninstall/reinstall the associated application.
You may also consider temporary manual removal and isolation of the suspect file to verify CM functionality.
;~) -
Af:tree control expand is not working
Hi all ,
af:tree control expansion is not working if I click on the + sign. But it is working thru context menu "Expand All Below" option.
Can any one help me.
Thanks
Kristi
Message was edited by:
Kristi(user576892)Hi,
not with this little information
- which technology
- which browser version (if applicable)
- how to reproduce
- does it reproduce on other machines / browsers
Frank -
The tab and control buttons are not working the Firefox browser (My browser is up-to-date). The buttons work in IE and Chrome, however, before I realized that, I even switched out my keyboard to a brand new one hoping it would solve the issue.
Thank you--there were a few random extensions I had not added (spyware, maybe?). Once I removed those the issue was fixed!
-
CONTROL - ARROW shortcut not working
hi guys
i NEED serious help here. After upgrading to 10.6.8 on my macbook, i realised that the control-arrow and control-number key to switch spaces are not working at all!!
i have googled on the same issue and many have said to check back the system preferences and i have checked and they are all in the correct settings. By switching to comman-arrow, my spaces does change but i am using command and option as other shortcuts. May i know has anyone know of a solution?
I have also restarted my macbook 3 times.yes I have selected the Tracks...
Control + Shift K it dose work, it cuts the movie and the music
But Control K alone is not working
Simon
EDIT:
OK, This was my mistake. I was Dragging the movie into Video 3, and the Audio into Video 3 Accidentally.
I noticed once the Video and The Audio are Both In the Video 1, And Audio 1 in the Timeline. Then Control "K" dose Works...
But if the video is inside Video 3 and The Audio is inside Audio 3 in the Timeline, Then Control K is not working. Only Control shift K works
Am I Correct ?
Simon -
Drivers 2.84: audio control still does not work
Hi there,
is still got the same problems i already had with the v1.13 drivers. The soundstorm panel output sliders don't. They just don't work at all. The windows "sndvol32.exe" works fine though. I am running a german windows XP. I deleted all localized .dll's as the are unusable anyway. ( I donno who has done translation and QC at NVIDIA)
And my major problem:
Under Input / Record there is no recording device available. (Digitzed input is there)
to sum things up:
- The output sliders still do NOT work at all
- There is still no recording device selectable
- Localization got better, but is still unusable (same prob as with the 41.xx video drivers. the text just does not fit in the panel, which looks garbled)
Greetings,
Andy XS
PS: I tried installing the drivers whilst using English(USA) as region settings. Didn't helphi,
thanks for your help wonkanoby...
but, i already tried it. I switched every possible thing to english(USA). removed the old drivers, cleared the registry, installed from scratch ... The Soundstorm Control still does not work. I guess it's because i am running a german Windows XP ( Though i really switched everything to english..)
Greetings,
Andy XS
-
Beats Audio Control Panel software not working after Windows 10 upgrade.
Beats Audio Control Panel software not working after Windows 10 upgrade. the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device? IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?
Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver. I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update. After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.
-
Air Traffic Control Widget Does Not Work With OS 10.6.8
Air Traffic Control Widget Does Not Work With OS 10.6.8.
Any suggestions?
SRNo I have not. I have thought about just downloading another version...
Thanks for your reply.
SR -
Grid Control performance tab not available when on the target home of ASM
I noticed recently that the "Performance" tab/link is not available when you are using 10g Grid Control and you are on the home page of an ASM instance. Can this be explained?
Hi MarGur
I try to help you. The OEM Grid Control in some times not discover the Oracle 9i databases and you must to add manually.
First, check in your target machine that the user owner of agent software have rights of read and write in the ORACLE_HOME directories of Oracle 9i databases.
Go to Grid Control Console
Select Targets ---> Databases
Press Add --> Select the host ebisdb2.oneshield.com and press continue
The automatic discover process begin. When finished is very normal that nor discover the Oracle 9i databases. You press the Add manually button
in the page that appear you must entry all the configuration information of database:
ORACLE_HOME directory
DBSNMP USER
DBSNMP PASSWORD
HOSTNAME
PORT
SID
Check that the dbsnmp user in your database is unlock and press the TEST button to verify the connection work fine.
After this many windows appear of configuration process, and you will put the sys password and host credentials.
If you have problems, tell me
Regards -
Distribution List administration not working?
Hello out there...
Not a GroupWise guru by any means...hoping I overlooked something simple....Groupwise 7.03 server and client system...we are just trying to get Distribution List Administration working and are testing it out amongst ourselves (admins)...so in Consoleone we use the Groupwise/Administration tab, add ourselves...it shows up for our user ID's in the Distribution List administration tab...but in the Windows client when trying to modify the list the add/remove buttons are greyed out. What am I doing wrong? Thanks.Originally Posted by jshorr
Hello out there...
Not a GroupWise guru by any means...hoping I overlooked something simple....Groupwise 7.03 server and client system...we are just trying to get Distribution List Administration working and are testing it out amongst ourselves (admins)...so in Consoleone we use the Groupwise/Administration tab, add ourselves...it shows up for our user ID's in the Distribution List administration tab...but in the Windows client when trying to modify the list the add/remove buttons are greyed out. What am I doing wrong? Thanks.
Have you corrected this. I'm seeing the same thing and can't figure it out.
It seems to have started after moving GW from Netware to Linux but not sure.
Thanks for any reply you may have. -
Image display control scrolling does not work properly when zoomed in
I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
Has anyone noticed this behaviour, and what would be a reliable solution to avoid this?
DirkHello,
no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
I have attached a VI for simplicity (although there is hardly any code in it).
If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position.
I think it is a bug in the implementation of the image display control.
Thanks,
Dirk
Attachments:
scrolling.vi 818 KB -
ALV GRID Tool bar options not working
Hello Experts,
I copied the standard tool bar into my program with the name 'ZSALV_STANDARD' and displaying the output in the grid format in a container with the method set_table_for_first_display
When I execute the program the standard buttong in the tool bar are not working... Can anyone guide where am I going wrong...
Here is my code
DATA : gr_event_handler TYPE REF TO lcl_event_handler .
DATA: threed TYPE i VALUE 1.
SET PF-STATUS 'ZSALV_STANDARD'.
* Creating an instance for the event handler
CREATE OBJECT gr_event_handler .
TRY.
CREATE DATA i_table TYPE TABLE OF (viewname).
ASSIGN i_table->* TO <i_itab>.
CREATE DATA wa_all LIKE LINE OF <i_itab>.
ASSIGN wa_all->* TO <wa_tab>.
* Selecting data dynamically
SELECT * FROM (viewname) INTO TABLE <i_itab>.
* Building the fieldcatelog
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = viewname
CHANGING
ct_fieldcat = li_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Making fields editable except key fields
IF sy-ucomm = 'UPD' OR sy-ucomm = 'CHANGE'.
LOOP AT li_fieldcat INTO lwa_fieldcat.
IF lwa_fieldcat-key = space.
lwa_fieldcat-edit = 'X'.
MODIFY li_fieldcat FROM lwa_fieldcat.
ENDIF.
ENDLOOP.
ENDIF.
* Making fields editable
IF sy-ucomm = 'NEW'.
LOOP AT li_fieldcat INTO lwa_fieldcat.
lwa_fieldcat-edit = 'X'.
MODIFY li_fieldcat FROM lwa_fieldcat.
ENDLOOP.
lh_flag = 'X'.
CLEAR : <i_itab>.
DO 100 TIMES.
APPEND <wa_tab> TO <i_itab>.
ENDDO.
ENDIF.
* Exclude buttons
PERFORM exclude_tb_functions CHANGING i_exclude.
IF g_custom_container IS INITIAL.
CREATE OBJECT g_custom_container
EXPORTING
container_name = g_container.
CREATE OBJECT grid1
EXPORTING
i_parent = g_custom_container.
ENDIF.
* Making all fields non-editable if display mode
IF sy-ucomm = 'SHOW'.
LOOP AT li_fieldcat INTO lwa_fieldcat.
lwa_fieldcat-edit = ' '.
MODIFY li_fieldcat FROM lwa_fieldcat.
ENDLOOP.
ENDIF.
IF sy-ucomm = 'SAVE'.
LOOP AT li_fieldcat INTO lwa_fieldcat.
IF lwa_fieldcat-key NE space.
lwa_fieldcat-edit = space.
MODIFY li_fieldcat FROM lwa_fieldcat.
ENDIF.
ENDLOOP.
ENDIF.
* Displaying ALV Grid
i_layout-NO_TOOLBAR = 'X'.
i_layout-edit = 'X'.
CALL METHOD grid1->set_table_for_first_display
EXPORTING
i_structure_name = viewname
it_toolbar_excluding = i_exclude
i_default = 'X'
is_layout = i_layout
CHANGING
it_outtab = <i_itab>
it_fieldcatalog = li_fieldcat
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3.
IF sy-subrc NE 0.
EXIT.
ENDIF.
* Getting the changed data
SET HANDLER gr_event_handler->handle_data_changed FOR grid1 .
CATCH cx_sy_create_data_error.
ENDTRY.
Thanks alot in advance.
SriHello ,
try
call method g_grid%->set_table_for_first_display
exporting
i_save = p_save_layout%
i_default = 'X'
is_layout = ps_layout%
is_variant = ps_variant%
it_toolbar_excluding = pt_exclude%
changing
it_outtab = pt_alv_tab1[]
it_fieldcatalog = pt_fieldcat%[].
call method g_grid%->set_toolbar_interactive.
regards
Prabhu -
WebUtil on Linux is not working
Hi All,
I have install app server 10.1.2.0.2 and configured the webuitl on linux ES4. I am trying to use client_text_io command it is not working. It is not even giving any errors. Please help me to find the problem.
Thanks,Go to
http://www.oracle.com/technology/products/forms/htdocs/webutil/webutil.htm
there is an example for client_text_io and demo forms usage WebUtil
Also, write your error message, otherwise it's difficult answer
Maybe you are looking for
-
Every few minutes my screen goes blue! It has never done this before I upgraded to Lion.
I installed Lion last night, now every few minutes my screen goes blue! It has never done this before I upgraded to Lion. Any ideas?
-
Suggestions required for transferring cost from GL account to a Project
Hi, We have a requirement where we want to transfer cost captured in GL to PA in a specific project. For example: Incurred a misc cost 100 (outside project) and posted to GL (a/c 600010) Dr 60010, Cr 120010 Later, realized this should be absorbed as
-
Lost white balance presets?
Somehow, during the last update, I lost the white balance presets. Now, all that shows in the menu is As Shot Auto Custom Everything else is gone. not tungsten, no flash, nothing. How do I get these back? Thank you Gary
-
160G Classic and Alpine iD-X001...No album art!
Just purchased the 160G Classic...everything working fine except for one hiccup...when I connect it to my Alpine deck (iDA-X001) the album art does not show. It worked seamlessly with my 80G 5th Gen. iPod, but I could really use the 160 gigs! Is Ap
-
Radial Gradients within individual editable characters?
Is it possible to have an "editable" line of text in InDesign where each character has a radial gradient fill of its own, instead of the radial gradient consuming the entire line of text? Thanks!