10.2.0.3 on RHEL 5.x (upgrading OS)

Hi Friends,
We have a database running on 10.2.0.3 version on RHEL 4. Now we got a request for upgrading only OS from RHEL 4 to RHEL 5.x.
I would like to know if this is possible? means can we have 10.2.0.3 running on RHEL 5.x?
Also, if compatible, while upgrading OS, what are the things that we need to take care?
Will there be any changes to be done at DB level? (I believe generally there will not be any...)
Thanks in advance

Hi;
We have a database running on 10.2.0.3 version on RHEL 4. Now we got a request for upgrading only OS from RHEL 4 to RHEL 5.x.
I would like to know if this is possible? means can we have 10.2.0.3 running on RHEL 5.x?Yes its possible
Also, if compatible, while upgrading OS, what are the things that we need to take care?You may need to relink library,
How to Relink Oracle Database Software on UNIX [ID 131321.1]
Please also see:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Master Note of Linux OS Requirements for Database Server [ID 851598.1]
The Oracle Validated RPM Package for Installation Prerequisities [ID 437743.1]
Regard
Helios

Similar Messages

  • Installation problem with oracle 10g release 1 in RHEL ES 4 platform

    Hi,
    I am facing such a problem. I want to install Oracle 10g release 1.
    I am using linux 86_64
    os is RHEL ES 4 UPGRADE 5 X_86_64
    When i put the command ./runInstaller It shows os is not supported.
    Is there any way to install this oracle version.
    Can u please suggest which version os is suitable for this.
    please suggest.
    Thanks & regards

    WHICH 10gR1 software do you use? Oracle provides different versions, you need 10.1.0.3 for Linux x86-64 from the OTN download page.
    By the way I would install 10gR2.
    Werner

  • Acrobat 9 pro support windows server 2003 32bit?

    in the acrobat 9 pro readme file,I see the system requiement:
    Windows Server® 2003 (with Service Pack 2 for 64-bit);
    my question is that does acrobat 9 pro support windows server 2003 32 bit?
    I have install it at windows server 2003 32bit,
    but when i open it, a message box
    "Licensing for this product has stopped working"
    i have try the solution in kb405970, and can not resolve it.
    so manybe really it doesn't support windows server 2003 32 bit?

    John makes some very good points but I would like to clarify one thing from his post: you are planning three migrations:
    1. From 32bit -> 64bit
    2. From Windows to Linux
    3. From Oracle 10gR2 to 11gR2
    The second of these is the one most liekly to give you grief. You certainly should not attempt to combine it with a database upgrade. Either move the database to RHEL and then upgrade it, or upgrade it on Windows and then move it to the new server.
    Of these, the first is the least controversial. So it's a nice point whether it is worth upgrading from Windows 32bit to Windows 64bit prior to moving to Linux.
    Cheers, APC

  • Oracle E-Business Suite non-rac to rac

    Hi,
    I've r12.0.6/10.2.0.3/RHEL5.3/file system NON-RAC and want to go r12.0.6/11gr2V2/RHEL5.4/ASM and RAC enviornment.
    Planning to move as follows:
    -Upgrade RHEL 5.4
    -Upgrade to 11gr2V2
    -COnvert to ASM
    -Configure to RAC.
    Please advice if any idea which has less risk.
    Please let me know metalink note convert single instance to RAC doc /File System to ASM or any good note.
    Any advice is welcome.
    Thanks

    Please see this thread for similar discussion.
    Cloning non-RAC to RAC ?
    Cloning non-RAC to RAC ?
    Thanks,
    Hussein

  • Migrate oracle 10.2.0.5.0 enterprise on windows server 2003 32bit to Linux

    Hello,
    I am trying to find any white paper regarding the benefits of migrating oracle database from windows server 2003 32bit
    to RedHat linux server 64bit.
    The current db version on windows is 10.2.0.5.0
    The new version on linux will be 11.2.0.3.0
    If anyone crossed such a white paper describing the pros & cons for such a migration..
    Thanks alot.
    Edited by: user7320646 on Jan 9, 2013 5:45 AM

    John makes some very good points but I would like to clarify one thing from his post: you are planning three migrations:
    1. From 32bit -> 64bit
    2. From Windows to Linux
    3. From Oracle 10gR2 to 11gR2
    The second of these is the one most liekly to give you grief. You certainly should not attempt to combine it with a database upgrade. Either move the database to RHEL and then upgrade it, or upgrade it on Windows and then move it to the new server.
    Of these, the first is the least controversial. So it's a nice point whether it is worth upgrading from Windows 32bit to Windows 64bit prior to moving to Linux.
    Cheers, APC

  • Installation Problem on 11g, RHEL 5 - Unable to generate temporary script

    Hello all,
    This is for the first time i am encountering this kind of error on 11g. Half way through installation i get this error.
    All parameters set correct, used the official installation technique (works fine previously), except for this time i am getting a weird error, which does not allow me to continue with the installation.
    Please help.
    Environment
    Oracle 11g
    RHEL 5
    Error on GUI -
    OUI-10053: Unable to generate temporary script: {0}. Unable to continue install
    Error on command prompt -
    OUI-10053:Unable to generate temporary script: /u01/app/oraInventory/orainstRoot.sh. Unable to continue install.
    Help appreciated.
    Thanks

    Hi Monu Koshy
    Can you please control the user rights and also the df ?
    ls -al /u01/app/oraInventory/
    df -h /u01/app/oraInventory/
    Regards,
    Hub

  • Installation problem on RHEL ES 4(Nahant Update 2)

    hi ,
    I am installing oracle9iR2 (9.2.0.4) (32 bit) on Red Hat Enterprise Linux ES release 4(32-bit) (update 2). but i am facing following problem during installation.
    actually it says
    Install is successful.
    but while
    linking oracle net required support files 9.2.0.4.0
    i am getting the following error like
    Error in invoking target ntcontab.o of makefile /home/oracle/OraHome1/network/lib/ins_net_client.mk
    Error in invoking target relink of makefile /home/oracle/OraHome1/precomp/lib/ins_precomp.mk
    Error in invoking target install of makefile /home/oracle/OraHome1/plsql/lib/ins_plsql.mk
    Error in invoking target install of makefile /home/oracle/OraHome1/plsql/lib/ins_sqlplus.mk
    Error in invoking target install of makefile /home/oracle/OraHome1/network/lib/ins_oemagent.mk
    Error in invoking target ioklist of makefile /home/oracle/OraHome1/network/lib/ins_nau.mk
    Error in invoking target iokinit of
    makefile /home/oracle/OraHome1/network/lib/ins_nau.mk
    Error in invoking target iokdstry of makefile /home/oracle/OraHome1/network/lib/ins_nau.mk
    Error in invoking target ikerberos of
    makefile /home/oracle/OraHome1/network/lib/ins_nau.mk
    Error in invoking target iradius of
    makefile /home/oracle/OraHome1/network/lib/ins_nau.mk
    Error in invoking target ioracle of
    makefile /home/oracle/OraHome1/network/lib/ins_rdbms.mk
    Error in invoking target install of makefile /home/oracle/OraHome1/ctx/lib/ins_ctx.mk
    Error in invoking target toolsinstall of
    makefile /home/oracle/OraHome1/ldap/lib/ins_ldap.mk
    Error in invoking target hragentinstall of
    makefile /home/oracle/OraHome1/ldap/lib/ins_ldap.mk
    Error in invoking target install of makefile /home/oracle/OraHome1/network/lib/ins_net_server.mk
    Error in invoking target install of makefile /home/oracle/OraHome1/otrace/lib/ins_otrace.mk
    Error in invoking target utilities of makefile /home/oracle/OraHome1/rdbms/lib/ins_rdbms.mk
    Error in invoking target install of
    makefile /home/oracle/OraHome1/rdbms/lib/ins_rdbms.mk
    and when each time error occur it ask me to either to press help or retry or ignore or cancel
    i dont know what to do........
    do any Package is to be installed or linking is need if it so how to do?
    i didnt get any clear doc of oracle9iR2(9.2.0.4.0) on RHEL ES 4
    plz can any one help me in this issue itz urgent.........
    With Regards
    Boo

    [oracle@testsrv2 install]$ tail -15 make.log
    /bin/sh: gcc: command not found
    make: *** [otrcfmt] Error 127
    /usr/bin/make -f ins_rdbms.mk utilities ORACLE_HOME=/home/oracle/OraHome1
    m -f /home/oracle/OraHome1/rdbms/lib/imp
    gcc -o /home/oracle/OraHome1/rdbms/lib/imp -L/home/oracle/OraHome1/rdbms/lib/ -L
    /home/oracle/OraHome1/lib/ -L/home/oracle/OraHome1/lib/stubs/ /home/oracle/Ora
    Home1/rdbms/lib/s0impdrv.o /home/oracle/OraHome1/rdbms/lib/defopt.o -ldbtools9
    -lclntsh `cat /home/oracle/OraHome1/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9
    -lnzjs9 -ln9 -lnl9 -lnro9 `cat /home/oracle/OraHome1/lib/ldflags` -lnsslb9 -l
    ncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9
    -lwtc9 -lmm -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9
    `cat /home/oracle/OraHome1/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -
    ln9 -lnl9 -lnro9 `cat /home/oracle/OraHome1/lib/ldflags` -lnsslb9 -lncrypt9 -
    lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -ltrace
    9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 -lclient9
    -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9
    -lcore9 -lunls9 -lnls9 `cat /home/oracle/OraHome1/lib/sysliblist` -Wl,-rpath,
    /home/oracle/OraHome1/lib:/lib:/usr/lib -lm `cat /home/oracle/OraHome1/lib/sy
    sliblist` -ldl -lm
    /bin/sh: gcc: command not found
    make: *** [home/oracle/OraHome1/rdbms/lib/imp] Error 127
    /usr/bin/make -f ins_rdbms.mk install ORACLE_HOME=/home/oracle/OraHome1
    chmod 755 /home/oracle/OraHome1/bin
    rm -f oracle mig dbv tstshm maxmem orapwd dbfsize cursize genoci extproc extproc
    32 hsalloci hsots hsdepxa dgmgrl dumpsga mapsga osh sbttest imp exp sqlldr rman
    avmurout avmping avligmsg avmumon nid /home/oracle/OraHome1/rdbms/lib
    /ksms.s /home/oracle/OraHome1/rdbms/lib/ksms.o
    /bin/sh: /usr/bin/gcc: No such file or directory
    /usr/bin/ar: /home/oracle/OraHome1/rdbms/lib/config.o: No such file or directory
    make: *** [home/oracle/OraHome1/rdbms/lib/config.o] Error 1

  • How Create Virtual Directory On Oracle Application Server 10g on RHEL 5

    Dear Sir
    i have deployed my application on OAS 10g on RHEL 5 ,,now since my application is calling some pro*c programs and then they generate some text based reports on fixed folder named
    /treas/temp
    now i simply have to open these text based reports on web browser
    WEB.SHOW_DOCUMENT('/forms/pcreport/'||v_filename);
    but for that i need to create virtual directory name : " /pcreport " without code
    kindlly help as its working on my developer suit 10g i created a virtual directory in my application server by making following entry in "orion-web.xml" file
    <virtual-directory virtual-path="/pcreport" real-path="/u/treas/temp" />
    kindlly help

    (My paths shown, yours will be different)
    In a text editor :
    /u01/app/oracle/product/midtier/Apache/Apache/conf/httpd.conf
    Add
    Alias /pcreport/ "/u01/app/oracle/product/midtier/forms/pcreport/"
    <Directory "/u01/app/oracle/product/midtier/forms/pcreport/">
    Options Indexes
    AllowOverride None
    Order allow,deny
    Allow from all
    </Directory>
    Create the pcreport directory.
    Add a simple test page
    vi /u01/app/oracle/product/midtier/forms/pcreport/test.html
    <html>
    <head>
    <title>Simple test page </title>
    <style type="text/css">
    body {
    margin-left: 20%;;
    margin-right: 20%;
    border: 1px dotted gray;
    padding: 10px 10px 10px 10px;
    </style>
    </head>
    <body>
    <p>test!</p>
    </body>
    </html>
    Test
    http://yourserver.com:7777/pcreport/test.html
    Best Regards
    mseberg

  • Error while running runcluvfy.sh(11g RAC on CentOS 5(RHEL 5))

    Oracle Version: 11G
    Operating System: Centos 5 (RHEL 5) : Linux centos51-rac-1 2.6.18-128.1.6.el5 #1 SMP Wed Apr 1 09:19:18 EDT 2009 i686 i686 i386 GNU/Linux
    Question (including full error messages and setup scripts where applicable):
    I am attempting to install oracle 11g in a RAC configuration with Centos 5 (redhat 5) as the operating system. I get the following error
    ERROR : Cannot Identify the operating system. Ensure that the correct software is being executed for this operating system
    Verification cannot complete
    I get this error message when I run runcluvfy.sh, to verify the my configuration is clusterable. I don't know why.
    I edited the /etc/redhat-release and entered echo "Red Hat Enterprise Linux AS release 4 (Nahant Update 7)" to attempt to fool the installer into thinking its red hat 4.
    But still shows the same message.
    Anyone knows how to fix this ?
    Please help me.

    http://www.idevelopment.info/data/Oracle/DBA_tips/Linux/LINUX_20.shtml
    runcluvfy.sh will not work on centos because the cluster verification utility checks the operating system version using the redhat-release packag and centos do this with his packages, so you must install and use redhat-release package
    Get rpm-build to be able to build rpm’s:
    [root@centos5 ~]# yum install rpm-build
    Get source rpm of redhat-release
    [root@centos5 ~]# wget ftp://ftp.redhat.com/pub/redhat/linux/enterprise/5Server/en/os/SRPMS/redhat-release-5Server-5.1.0.2.src.rpm
    Build package:
    [root@centos5 ~]# rpmbuild –rebuild redhat-release-5Server-5.1.0.2.src.rpm
    Install newly generated rpm:
    [root@centos5 ~]# rpm -Uvh –force /usr/src/redhat/RPMS/i386/redhat-release-5Server-5.1.0.2.i386.rpm

  • Error reading from file glibc-2.5-24.i686.rpm RHEL 5 Setup stuck at 80%

    Hi, I am installing Oracle 10g on RHEL 5 (Red Hat Enterprise Linux 5) machine I am facing two problems
    1) while installing the rpm packages the following package gave an error
    Error reading from file glibc-2.5-24.i686.rpm
    2) I still gave a try to runInstaller command the installer opened but was stuck at 80%
    I have 3 GB ram and 320GB hard drive I am not sure what to put in the swap memory and other settings i blindly followed instructions given here
    http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnRHEL5.php
    What could be the problem where do I find the error log if its created
    Please help me
    Thanks
    Edited by: 891355 on Nov 6, 2011 12:06 PM

    I found the installActions file in the installer folder and I think this could be the problem
    INFO: The 'shiphomeproperties.xml' file is missing from shiphome location '/home/oracle/Desktop/database/install/../stage/products.xml.' Add this file to the 'Disk1/stage' directory of the shiphome.
    though I am attaching the log file for more details do you think the installer is corrupt :(
    InstallActions log file ==> http://www.mediafire.com/?nh7mx7bxqht9ovu
    Edited by: 891355 on Nov 6, 2011 1:35 PM

  • BO XI 3.0 on RHEL 5.2

    Hi everyone,
    The supported platforms guide says that BO XI 3.0 supports RHEL 4 and higher patches, we are planning to install it on RHEL 5.2, is this installation safe? is this installation supported?
    Thanks,
    Fabio

    Hello Fabio,
    I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
    This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
    It is monitored by qualified technicians and you will get a faster response there.
    Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
    Best regards,
    Falk

  • 11.5.10 installation on RHEL as 4.0

    Hi,
    Please see if all the steps have been maintained for installation on RHEL as 4.0
    Oracle Applications 11.5.10 - Installation Update Notes for Linux x86, Solaris SPARC, MS Windows, HP-UX PA-RISC, HP-Tru64, IBM AIX - B13590-01 [ID 287453.1]
    OS: Red hat Enterprise Linux AS 4.0
    Required Packages and Patches
    Legacy Software Development package and X Software Development package
    Note: Select these packages from the Package Group Selection screen. If the operating system is already installed, use System Settings > Add/Remove Applications to install these two packages.
    The following components will be installed automatically:
    compat-db-4.1.25-9
    compat-gcc-32-3.2.3-47.3
    compat-gcc-32-c++-3.2.3-47.3
    compat-oracle-rhel4-1.0-5
    compat-libcwait-2.0-2
    compat-libgcc-296-2.96-132.7.2
    compat-libstdc++-296-2.96-132.7.2
    compat-libstdc++-33-3.2.3-47.3
    xorg-x11-deprecated-libs-devel-6.8.1-23.EL
    xorg-x11-deprecated-libs-6.8.1-23.EL
    The following required component must be installed manually:
    openmotif-2.1.30-x
    Note: For information on downloading the openmotif component, see the instructions at the following URL:https://rhn.redhat.com/errata/RHSA-2005-412.html
    Net Service Listeners in Multi-user Installations
    To give all users in a multi-user installations write privileges to /tmp/.oracle:
    $ chmod 777 /tmp/.oracle
    All Linux x86 and Linux x86-64 (AMD64/EM64T) Operating Systems
    Kernel Requirements
    Red Hat Enterprise Linux AS/ES 4.0 2.6.9-5.EL To determine distribution and version, enter: $ uname -r
    glibc Requirements
    Red Hat Enterprise Linux AS/ES 4.0 2.3.4-2 To determine installation status, enter: $ rpm -q glibc
    Domain Name System (DNS) Resolver Parameters
    Two Domain Name System (DNS) resolver parameters (timeout and attempts) are set by default to low values when the operating system is installed. These low values may cause attempted network connections to an Oracle database to fail. If this happens, add or update the following entries to these minimum settings in the /etc/resolv.conf file on each server node:
    options attempts:5
    options timeout:15
    Red Hat Enterprise Linux AS/ES 3.0 and 4.0 and SUSE Linux Enterprise Server 8 and 9
    Verifying Host Names
    Use the following to verify host name settings:
    For Red Hat Enterprise Linux AS/ES 3.4 and 4.0:
    Verify that the /etc/hosts file is formatted as follows:
    127.0.0.1 localhost.localdomain
    <ip_address> <node_name>.<domain_name>
    Verify that the /etc/sysconfig/network file is formatted as follows:
    HOSTNAME=<node_name>.<domain_name>
    If the /etc/sysconfig/networking/profiles/default/network file exists, remove it.
    If you changed any files in the previous steps, restart the system.
    Modifying the Number of Open File Descriptors
    Open the /etc/security/limits.conf file and change the existing values for "hard" and "soft" parameters as follows. Restart the system after making changes.
    For Red Hat Enterprise Linux AS/ES 3.0, 4.0, and SUSE Linux Enterprise Server 9:
    hard nofile 65535
    soft nofile 4096
    Modifying Port Range Values
    Open the /etc/sysctl.conf file and change the value of net.ipv4.ip_local_port_range as follows. Restart the system after making changes.
    net.ipv4.ip_local_port_range = 10000 65000
    Please note that this range is a recommended range, and may need to be adjusted according to the specific needs of the user's environment in order to avoid port conflicts.
    Setting the Environment
    Verify that the host name setting is correct. The command should return a fully qualified host name. For example: <host_name>.<domain_name>.
    # hostname
    For the hugemem kernel, install rpm setarch-1.0-2 or higher. (For up, smp, and boot kernels, omit this step.) This step is not required for SUSE Linux Enterprise Server 8.
    # setarch i386
    Completing Preinstallation Tasks
    Complete these tasks after you set the environment variables and before you begin the installation steps described in Installing Oracle Applications.
    Unset the NLS_LANG environment variable, if it is defined prior to installation.
    Apply one of these OS library patches: 4198954 (for Red Hat 4.0) or 3006854 (for Red Hat 3.0). You can download these patches from OracleMetaLink.
    Restart your system.
    groupadd dba
    useradd -g dba appltest
    useradd -g dba oratest
    Completing Postinstallation Tasks
    After the installation is complete, perform the following tasks in addition to the ones described in Installing Oracle Applications:
    Apply patch 4632932 to all the application tiers, then re-source the applications environment file to refresh the environment variables. This patch is required for setting the values for LD_ASSUME_KERNEL and LD_PRELOAD.
    Should be missing kernel parameters and some other utilities like ar,make,gcc etc
    Thanks,
    SM

    Hi,
    Please can someone help me to get the Patch 4198954. Why don't you download it from MOS website? I believe no one is supposed to download the patch from MOS and send it to you by email as this violates Oracle support agreement policy.
    Thanks,
    Hussein

  • ASM installation on RHEL 6.4 in Amazon EC2

    I thought I'd perform an installation of 12cR1 to do a little testing. So I launched a new instance in Amazon EC2 and picked an AMI for 64-bit RHEL 6.4.
    All started smoothly, but I've got stuck preparing a disk for ASM.
    My first plan was to install ASMLIB. I see from the documentation that I need kmod-oracleasm (kmod-oracleasm-2.0.6.rh1-2.el6.x86_64.rpm), and that this is in the RHEL supplementary channel.
    $ yum repolist all
    Loaded plugins: amazon-id, refresh-packagekit, rhui-lb, security
    repo id                                            repo name                                                          status
    rhel-source                                        Red Hat Enterprise Linux 6Server - x86_64 - Source                 disabled
    rhel-source-beta                                   Red Hat Enterprise Linux 6Server Beta - x86_64 - Source            disabled
    rhui-REGION-client-config-server-6                 Red Hat Update Infrastructure 2.0 Client Configuration Server 6    enabled:      3
    rhui-REGION-rhel-server-releases                   Red Hat Enterprise Linux Server 6 (RPMs)                           enabled: 10,994
    rhui-REGION-rhel-server-releases-optional          Red Hat Enterprise Linux Server 6 Optional (RPMs)                  enabled:  6,250
    rhui-REGION-rhel-server-releases-optional-source   Red Hat Enterprise Linux Server 6 Optional (SRPMs)                 disabled
    rhui-REGION-rhel-server-releases-source            Red Hat Enterprise Linux Server 6 (SRPMs)                          disabled
    repolist: 17,247
    $ rhn-channel --add --channel=rhel-x86_64-server-supplementary-6
    Username:
    ^C
    Does Amazon EC2 provide the RHEL supplementary channel, and if so what credentials do I need to provide? Otherwise I guess I would need my own RHN subscription, which seems expensive for a self-learning instance.
    So my second plan was to avoid ASMLIB and implement udev rules.
    I created a 64GiB volume and attached it to the instance as /dev/sdh. On the instance it appears as /dev/xvdl:
    $ fdisk -l /dev/xvdl
    Disk /dev/xvdl: 68.7 GB, 68719476736 bytes
    255 heads, 63 sectors/track, 8354 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0xf4c9fedb
        Device Boot      Start         End      Blocks   Id  System
    /dev/xvdl1               1        8354    67103473+  83  Linux
    $ sudo scsi_id -g -u -d /dev/xvdl
    $
    So scsi_id doesn't return a value to use in the udev rule. I've found references to this which suggest setting disk.EnableUUID. Is this option available in Amazon EC2 at all? Or is there an alternative way of getting a UUID for the disk?
    Any help with these questions, or suggestions for alternative solutions, would be much appreciated.
    Thanks
    Mike

    Did you try this command ?
    ~]# blkid
    /dev/vda1: UUID="7fa9c421-0054-4555-b0ca-b470a97a3d84" TYPE="ext4"
    /dev/vda2: UUID="7IvYzk-TnnK-oPjf-ipdD-cofz-DXaJ-gPdgBW" TYPE="LVM2_member"
    /dev/mapper/vg_kvm-lv_root: UUID="a07b967c-71a0-4925-ab02-aebcad2ae824" TYPE="ext4"
    /dev/mapper/vg_kvm-lv_swap: UUID="d7ef54ca-9c41-4de4-ac1b-4193b0c1ddb6" TYPE="swap"
    https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Deployment_Guide/s2-sysinfo-filesyste…

  • Problems installing CF 10 with Apache 2.2.24 (or 2.4) on RHEL 6.4

    Built Apache using openssl 1.0.1e (updated LD_LIBRARY_PATH to reflect the correct openssl libs) and pcre. Configure for build was:
    configure --enable-ssl=shared --with-ssl=/usr/local/ssl  --enable-so --with-included-apr --with-pcre  --with-perl
    Also downloaded and built the connector from http://helpx.adobe.com/coldfusion/kb/rhel-connector-configuration.html after the vanilla CF install didn't work. I get the following when I try to start up CF:
    [root@web01 logs]# /etc/rc.d/init.d/coldfusion_10 start
    Starting ColdFusion 10 server instance named cfusion ...
    The ColdFusion 10 server instance named cfusion is starting up and will be available shortly.
    nohup: appending output to `nohup.out'
    ======================================================================
    Running the ColdFusion 10 connector wizard
    ======================================================================
    Configuring the web server connector (Launched on the first run of the ColdFusion 10 start script)
    Running /usr/local/apache2/conf connector wizard...
    =======================================
    There was an error while running the connector wizard
    Connector installation was not successful
    =======================================
    ======================================================================
    ColdFusion 10 server instance named cfusion has been started.
    ColdFusion 10 will write logs to /opt/coldfusion10/cfusion/logs/coldfusion-out.log
    ======================================================================
    The wsconfig.log contains the following:
    [root@web01 wsconfig]# cat wsconfig.log
    # Created by ColdFusion on 05/28 15:15:23
    05/28 15:15:23 info Tomcat Connector
    05/28 15:15:23 debug command line: -ws Apache -bin /usr/local/apache2/bin/httpd -script /usr/local/apache2/bin/apachectl -dir /usr/local/apache2/conf -v
    05/28 15:15:23 info Red Hat Enterprise Linux Server release 6.4 (Santiago)
    05/28 15:15:23 debug Using Apache binary /usr/local/apache2/bin/httpd
    05/28 15:15:23 info Server's Module Magic Number: 20051115:31.  Supported major magic numbers on this platform are 20020628 and 20020903.
    05/28 15:15:23 info Attempting to build connector from sources
    05/28 15:15:23 info Server version: Apache/2.2.24 (Unix)
    05/28 15:15:23 debug Using Apache control script /usr/local/apache2/bin/apachectl
    05/28 15:15:23 debug Parsing Apache configuration file /usr/local/apache2/conf/httpd.conf
    05/28 15:15:23 debug Exec'ing chmod 777 /opt/coldfusion10/config/wsconfig/1
    05/28 15:15:23 debug Set permission to 777 on /opt/coldfusion10/config/wsconfig/1
    05/28 15:15:23 debug Exec'ing chmod +x /opt/coldfusion10/config/wsconfig/1/mod_jk.so
    05/28 15:15:23 debug Set permission to execute on /opt/coldfusion10/config/wsconfig/1/mod_jk.so
    05/28 15:15:23 debug Created file /opt/coldfusion10/config/wsconfig/1/mod_jk.so
    05/28 15:15:23 debug Wrote file /usr/local/apache2/conf/httpd.conf
    05/28 15:15:23 debug Added ColdFusion configuration to Apache configuration file /usr/local/apache2/conf/httpd.conf
    05/28 15:15:23 debug Created file /opt/coldfusion10/config/wsconfig/1/README.txt
    05/28 15:15:23 debug Wrote file /opt/coldfusion10/config/wsconfig/wsconfig.properties
    05/28 15:15:23 debug Exec'ing /usr/local/apache2/bin/apachectl restart
    05/28 15:15:23 error Error running "/usr/local/apache2/bin/apachectl restart": exit code was 1
    05/28 15:15:23 error Error restarting Apache server.  The web server must be restarted to complete this operation.
    com.adobe.coldfusion.connector.connectorinstaller.WebServerException: Error restarting Apache server.  The web server must be restarted to complete this operation.
        at com.adobe.coldfusion.connector.connectorinstaller.ApacheInstaller.restartWS(ApacheInstall er.java:480)
        at com.adobe.coldfusion.connector.connectorinstaller.ApacheInstaller.installConnector(Apache Installer.java:269)
        at com.adobe.coldfusion.connector.connectorinstaller.ConnectorInstaller.installConnector(Con nectorInstaller.java:340)
        at com.adobe.coldfusion.connector.connectorinstaller.ConnectorInstaller.doIt(ConnectorInstal ler.java:284)
        at com.adobe.coldfusion.connector.connectorinstaller.ConnectorInstaller.main(ConnectorInstal ler.java:741)
    05/28 15:16:37 info Tomcat Connector
    05/28 15:16:37 debug command line: -ws Apache -dir /usr/local/apache2/conf -bin /usr/local/apache2/bin/httpd -script /usr/local/apache2/bin/apachectl -cfide /opt/coldfusion10/cfusion/wwwroot/CFIDE -v
    05/28 15:16:37 error This web server is already configured for ColdFusion.
    com.adobe.coldfusion.connector.connectorinstaller.ConnectorInstallerException: This web server is already configured for ColdFusion.
        at com.adobe.coldfusion.connector.connectorinstaller.ApacheInstaller.installConnector(Apache Installer.java:187)
        at com.adobe.coldfusion.connector.connectorinstaller.ConnectorInstaller.installConnector(Con nectorInstaller.java:340)
        at com.adobe.coldfusion.connector.connectorinstaller.ConnectorInstaller.doIt(ConnectorInstal ler.java:284)
        at com.adobe.coldfusion.connector.connectorinstaller.ConnectorInstaller.main(ConnectorInstal ler.java:741)
    I've searched and tried just about everything I could find relating to the error info.

    Hi,
    RHEL 6.4 is not the supported version of RHEL, Supported version are 5.6 and 6.1. We published an article you can try if that helps.
    http://helpx.adobe.com/coldfusion/kb/rhel-connector-configuration.html
    However if that doesn't work please try this in Supported environment.
    Regards,
    Priyank

  • Oracle 11g install problem on rhel 4.4

    i was trying to install oracle 11g to rhel 4.4
    during the install process , there are two warning when runing environment check
    one is kernal parameter
    i set four kernal parameter like this:
    net.core.rmem_default = 262144
    net.core.rmem_max = 262144
    net.core.wmem_default = 262144
    net.core.wmem_max = 262144
    but oracle warning me they should be set as 419430
    the other is swap space :
    i set 2G,but oracle needs 4G.
    i neglect them and continue
    but when the install proceed 11percent , it stoped there and the i pose the install log is :
    INFO: Method 'dispose()' Not implemented in class 'CustomConfigurationOptions'
    INFO: config-context initialized
    INFO: *** Install Page***
    INFO: FastCopy : File Version is Compatible
    INFO: Install mode is fastcopy mode for component 'oracle.server' with Install type 'Custom'.
    INFO: Link phase has been specified as needed
    INFO: Setup phase has been specified as needed
    INFO: HomeSetup JRE files in Scratch :0
    INFO: Setting variable 'ROOTSH_LOCATION' to '/home/oracle/ora11/DB10g/root.sh'. Received the value from a code block.
    INFO: Setting variable 'ROOTSH_LOCATION' to '/home/oracle/ora11/DB10g/root.sh'. Received the value from a code block.
    INFO: Performing fastcopy operations based on the information in the file 'racfiles.jar'.
    INFO: Performing fastcopy operations based on the information in the file 'oracle.server_Custom_exp_1.xml'.
    INFO: Performing fastcopy operations based on the information in the file 'oracle.server_Custom_dirs.lst'.
    INFO: Performing fastcopy operations based on the information in the file 'oracle.server_Custom_filemap.jar'.
    INFO: Performing fastcopy operations based on the information in the file 'oracle.server_Custom_1.xml'.
    INFO: Performing fastcopy operations based on the information in the file 'setperms1.sh'.
    INFO: Number of threads for fast copy :1
    INFO: FastCopy : The component info is ignored :oracle.network.cman:11.1.0.6.0
    INFO: FastCopy : The component info is ignored :oracle.precomp.lang:11.1.0.6.0
    INFO: FastCopy : The component info is ignored :oracle.odbc:11.1.0.6.0
    INFO: FastCopy : The component info is ignored :oracle.rdbms.dv:11.1.0.6.0
    INFO: FastCopy : The component info is ignored :oracle.rdbms.lbac:11.1.0.6.0
    INFO: FastCopy : The component info is ignored :oracle.rdbms.dv.oc4j:11.1.0.6.0
    INFO: FastCopy : The component info is ignored :oracle.odbc.ic:11.1.0.6.0
    INFO: FastCopy : The component info is ignored :oracle.sysman.ccr:10.2.6.0.0
    i do not know how to make it work ,please help me
    thank you!

    This is the output from my current 11g installation on an OEL4:
    Checking operating system package requirements ...
    Checking for make-3.80; found make-1:3.80-6.EL4-i386. Passed
    Checking for binutils-2.15.92.0.2; found binutils-2.15.92.0.2-21-i386. Passed
    Checking for gcc-3.4.5; found gcc-3.4.6-3.1-i386. Passed
    Checking for libaio-0.3.105; found libaio-0.3.105-2-i386. Passed
    Checking for libaio-devel-0.3.105; found libaio-devel-0.3.105-2-i386. Passed
    Checking for libstdc++-3.4.5; found libstdc++-3.4.6-3.1-i386. Passed
    Checking for elfutils-libelf-devel-0.97; found elfutils-libelf-devel-0.97.1-3-i386. Passed
    Checking for sysstat-5.0.5; found sysstat-5.0.5-11.rhel4-i386. Passed
    Checking for libgcc-3.4.5; found libgcc-3.4.6-3.1-i386. Passed
    Checking for libstdc++-devel-3.4.5; found libstdc++-devel-3.4.6-3.1-i386. Passed
    Checking for unixODBC-2.2.11; found unixODBC-2.2.11-1.RHEL4.1-i386. Passed
    Checking for unixODBC-devel-2.2.11; found unixODBC-devel-2.2.11-1.RHEL4.1-i386.
    ~ Madrid

Maybe you are looking for

  • Replacing attribute value during runtime?

    Ok Here we go... Is it possible to replace the value of an attribute during query runtime???  Here is what my user wants...They want the value of an attribute in a query (no the input selection) to change according to the current date for example: If

  • Inline objects in page layout mode

    Before I drive myself any more insane than I already am can someone please confirm, or otherwise, that it isn't possible to use inline objects in page layout mode or, indeed, inside text boxes in word processing mode? Assuming this is the case can an

  • Fiori Launchpad - Basic authentication popup

    Hi, I have used the std. class /UI2/CL_SRA_LOGIN for Fiori launchpad log in screen. When there is no user action for long time and the session cookie gets expired; any operation performed(like selecting an app) in this case is bringing a browser basi

  • My SII keyboard somehow switched from text swyping to having to "writing".  checked all settings & can't find what changed

    Picked up the phone to text and all of a sudden the only way to get a message off was with "writing" it (with my finger)in the small block space it provided.  Checked all the settings and could not figure out what had changed.  I can get the Samsung

  • Can't rest keychain

    on my macbook pro ican't rest keychain it says Unable to obtain authorization for this operation.