10.2.0.3 on solaris 9(Sparc 64 bit), patch 5257399 needed or not?

We are going to install oracle 10.2.0.3 on a Solaris 9 (Sparc 64 bit) box. According to Note 406472.1, Mandatory Patch 5752399 is needed for 10.2.0.3 on Solaris 64-bit and Filesystems Managed By Veritas or Solstice Disk Suite software. Our system is not on SAN, only local disks, so I'm sure we don't use veritas file system. But I'm not sure if we still use Solstice Disk Suite software. Sun said that in Solaris 9, Solstice Disk Suite is renamed to Solaris volume manager and it is bundled in Solaris 9. Does this mean Solaris 9 is using Solstice Disk Suite by default and we have to apply patch 5752399?
How can I verify which file manager we are using? (Our sys adm is not quite sure).
If we apply the patch no matter we really need it or not, what impact to the system?
Please advise. Thanks!

I found by issue "mount -v" that our disk slices are
UFS type. So we don't need apply patch 5257399,
right? Please confirm. Thanks!!!For your information, you are asking the user community to confirm, not Oracle. Some (many?) of us are not employed by Oracle.
Therefore, the only answers you can get are from 'friends'. Nothing would be official and Oracle (and Oracle Support) would not be legally responsible.
Your safest bet would be to escalate the request wityh Oracle Support.

Similar Messages

  • Solaris 10 SPARC Recommended Patch Cluster for  2008 quarter 3 version

    Dear All,
    Could any one please guide me, where I can download "Solaris 10 SPARC Recommended Patch Cluster" for 2008 quarter 3 version.
    I have checked in sunsolve.sun.com, I'm able to find only the latest release.
    please guide me.
    Thanks and regards,
    veera

    Ok,
    Here's a cute little formula to try using your systems parameters to gain some "head's-up" on an expected or estimated time to complete the patch run.
    You will need a few things to prepare.
    Number of "real" CPU's (not hyperthreads)
    Speed of each CPU as a whole number i.e 2.87Ghz = 2,867
    the total number of patches from the cluster i.e. Sept 15th = 381 (Solaris 10)
    Network factor if using NFS = 2.5
    local cluster file factor = 1.5
    Patch cluster on CDROM factor = 3.25
    Now, combine all of those elements in this equation:
    { ( #1 * #2 ) / #3 * factor(#4 or #5 or #6) }
    This will yield a number in minutes of patch run time. Then all you will need to add is the standard boot up time to get the total of all patching and reboot.
    Of course you could write a script to extract all of this information and feed it to "bc -l" to get a quick figure.
    Example, on one of my Solaris 10 boxes with the information filled in to the equation:
    #> echo "((4*2660)/381)*1.5"|bc -l
    #> 41.88976377952755905511
    It actually took 44.2 minutes to complete the patching of this box plus another 12 minutes to reboot. But all in all a pretty fair estimate I think.

  • Problem with installation application server 10g on Solaris 10 sparc

    Hello all.
    Help me, please.
    I'm trying to install Oracle aplication server 10.0.1.2.0.2 on Solaris 10 sparc.
    Server - Sun Fire v210.
    When i install oracle infrastructure(metadata repository and identify management),
    i have a problem - on first step of configuration "end of communication channel".
    Failed
    Anybody know, how solve this problem?
    Sorry for my english.

    There is known bug in installing Oracle10gAS infra. You have to apply the following note during the installation.
    see MetaLink Note:330016.1 for current AS 10.1.2 installation requirements for Solaris 10.
    Regards,
    Amir

  • Oracle 10g R2 installation on sun solaris 10 Sparc machine

    Hi there,
    I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
    Error encountered:
    Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
    Checking installer requirements...
    Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
    Passed
    Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
    Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
    Checking monitor: must be configured to display at least 256 colors Failed <<<<
    >>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
    Some requirement checks failed. You must fulfill these requirements before
    continuing with the installation,at which time they will be rechecked.
    Continue? (y/n) [n]
    The following were the steps taken before encountering the above error
    1. logged into a workstation
    2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
    3. keyed in the following at the command prompt
    DISPLAY=machine_name:0.0; export DISPLAY
    4. executed the following from the command prompt
    ./runInstaller
    Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
    Please help me with this problem.
    Thank you
    Ravindran Kanniah

    It is because of UNIX shell. I also faced this error during installation.
    First check your shell by the following command.
    $ echo $SHELL
    Then select the below.
    For csh shell
    $ setenv DISPLAY 192.168.1.128:0.0
    $ export DISPLAY
    For sh,ksh and bash
    $ DISPLAY=192.168.1.128:0.0
    $ export DISPLAY
    After you do this check the value of DISPLAY variable.
    $ echo $DISPLAY
    If the DISPLAY variable is set then run ./runInstaller.
    One advice: Keep a complete log of your terminal session. This will help you in future :)
    -aijaz

  • Weblogic 10.3.0 on Solaris 10 Sparc

    Hello,
    Need Help!!!!
    I have installed WL 10.3.0 on Solaris 10 Sparc 64bits and i have this Error:
    <May 31, 2010 6:51:56 PM WEST> <Warning> <Socket> <BEA-000444> <Could not load the performance pack that can take advantage of /dev/(e
    )poll device due to:
    java.lang.NegativeArraySizeException.
    Will attempt to use the performance pack that does not depend on /dev/(e)poll device.>
    # A fatal error has been detected by the Java Runtime Environment:
    # SIGSEGV (0xb) at pc=0xffffffff08b04e68, pid=5539, tid=74
    # JRE version: 6.0_20-b02
    # Java VM: Java HotSpot(TM) 64-Bit Server VM (16.3-b01 mixed mode solaris-sparc )
    # Problematic frame:
    # C [libmuxer.so+0x4e68]
    # An error report file with more information is saved as:
    # /app/weblogic/domains/smpftth/hs_err_pid5539.log
    # If you would like to submit a bug report, please visit:
    # http://java.sun.com/webapps/bugreport/crash.jsp
    # The crash happened outside the Java Virtual Machine in native code.
    # See problematic frame for where to report the bug.
    Does any one knows how to help me?

    Here is the text from the download site from 10.3.3 that applies to 10.3.0 as well:
    Note: This table includes links to WebLogic Server installers that include 32-bit JVMs for the platform
    in question, and links to WebLogic Server generic installers that can be used on any supported platform.
    To use WebLogic Server with 64-bit JVM's on Linux and Solaris or to use WLS on other supported
    platforms, use the WebLogic Server generic installer listed under "Additional Platforms". The generic
    installers do not include a JVM/JDK. For instructions on using the generic installers, see this document.
    So regardless whether the OS is 64bit or not, you need to select the installer on whether you are running WebLogic Server in a 32bit JVM or a 64bit JVM. If you run in a 32bit JVM, you can use the 32bit binary installer for Solaris that has a .bin extension. If you are going to run a 64bit JVM, then you need to download the "generic" .jar installer and separately download the supported 64bit JDK and follow the instructions similar to this, but for 10.3.0.
    http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14142/guimode.htm#BABGFAAF
    On edelivery.oracle.com, select Oracle Fusion Middleware, then Oracle® Application Server 10g Release 3 (10.1.3) Media Pack for Oracle Solaris on SPARC (64-bit)
    32bit native Solaris installer for 10.3.0 is Part Number V13618-01
    64bit generic installer for 10.3.0 is Part Number V13672-01

  • How I can emulate Solaris 10 sparc on a Virtual Machine?

    Hi for all.
    Guys, I need to emulate an environment Solaris 10 in my job. We have an application that just run in this kind of environment. But, I found some problems when I try to install Solaris 10 Sparc on Virtual Box. I think that the problem is the type of architecture that are differents.
    So, someone knows a way to emulate Solaris 10 sparc architecture on a Virtual Machine. Doesn't matter the Virtual Machine application (Virtual Box, VMWare, etc..). Somebody Help me?

    HI Srini_Chavali
    I'm using the Solaris 10 u11.
    In fact, Virtual Box supports Solaris u6 and higher. I have an installation of Virtual Box running Solaris x86. But, the problem occurs when I try to create a Virtual machine to work with Solaris 10 Sparc architecture.
    The errors that appears on the screen are:
    "No bootable medium found! System Halted" and "FATAL: Could not read from the boot medium! System halted"
    This error occurs just with Architecture sparc.

  • Compatible HP laser jet printer for EBS 12.0.6 on Solaris 10 SPARC 64 bit

    Hi,
    We have our EBS 12.0.6 on Sun Solaris SPARC 64 bit. There are few hp printer (hp laserjet p2015dn) configured with our application and they are working fine.
    Now we have to add one more printer but ( hp laserjet p2015dn) is not available now.
    So please suggest the hp laserjet printer available for Solaris 10 Sparc 64 bit.
    Thanks,
    Sharad

    We have our EBS 12.0.6 on Sun Solaris SPARC 64 bit. There are few hp printer (hp laserjet p2015dn) configured with our application and they are working fine.
    Now we have to add one more printer but ( hp laserjet p2015dn) is not available now.
    So please suggest the hp laserjet printer available for Solaris 10 Sparc 64 bit.You already have the same type of printer configured and it is working properly, so I would say it is supported.
    What is the difference between the two printers configuration?
    Can you print from the OS to the new printer?
    What do you mean by "not available now"?
    Thanks,
    Hussein

  • SAP 7.0 on SUN Cluster 3.2 (Solaris 10 / SPARC)

    Dear All;
    i'm installing a two nodes cluster (SUN Cluster 3.2 / Solaris 10 / SPARC), for a HA SAP 7.0 / Oracle 10g DataBase
    SAP and Oracle softwares were successfully installed and i could successfully cluster the Oracle DB and it is tested and working fine.
    for the SAP i did the following configurations
    # clresource create -g sap-ci-res-grp -t SUNW.sap_ci_v2 -p SAPSID=PRD -p Ci_instance_id=01 -p Ci_services_string=SCS -p Ci_startup_script=startsap_01 -p Ci_shutdown_script=stopsap_01 -p resource_dependencies=sap-hastp-rs,ora-db-res sap-ci-scs-res
    # clresource create -g sap-ci-res-grp -t SUNW.sap_ci_v2 -p SAPSID=PRD -p Ci_instance_id=00 -p Ci_services_string=ASCS -p Ci_startup_script=startsap_00 -p Ci_shutdown_script=stopsap_00 -p resource_dependencies=sap-hastp-rs,or-db-res sap-ci-Ascs-res
    and when trying to bring the sap-ci-res-grp online # clresourcegroup online -M sap-ci-res-grp
    it executes the startsap scripts successfully as following
    Sun Microsystems Inc.     SunOS 5.10     Generic     January 2005
    stty: : No such device or address
    stty: : No such device or address
    Starting SAP-Collector Daemon
    11:04:57 04.06.2008 LOG: Effective User Id is root
    Starting SAP-Collector Daemon
    11:04:57 04.06.2008 LOG: Effective User Id is root
    * This is Saposcol Version COLL 20.94 700 - V3.72 64Bit
    * Usage: saposcol -l: Start OS Collector
    * saposcol -k: Stop OS Collector
    * saposcol -d: OS Collector Dialog Mode
    * saposcol -s: OS Collector Status
    * Starting collector (create new process)
    * This is Saposcol Version COLL 20.94 700 - V3.72 64Bit
    * Usage: saposcol -l: Start OS Collector
    * saposcol -k: Stop OS Collector
    * saposcol -d: OS Collector Dialog Mode
    * saposcol -s: OS Collector Status
    * Starting collector (create new process)
    saposcol on host eccprd01 started
    Starting SAP Instance ASCS00
    Startup-Log is written to /export/home/prdadm/startsap_ASCS00.log
    saposcol on host eccprd01 started
    Running /usr/sap/PRD/SYS/exe/run/startj2eedb
    Trying to start PRD database ...
    Log file: /export/home/prdadm/startdb.log
    Instance Service on host eccprd01 started
    Jun 4 11:05:01 eccprd01 SAPPRD_00[26054]: Unable to open trace file sapstartsrv.log. (Error 11 Resource temporarily unavailable) [ntservsserver.cpp 1863]
    /usr/sap/PRD/SYS/exe/run/startj2eedb completed successfully
    Starting SAP Instance SCS01
    Startup-Log is written to /export/home/prdadm/startsap_SCS01.log
    Instance Service on host eccprd01 started
    Jun 4 11:05:02 eccprd01 SAPPRD_01[26111]: Unable to open trace file sapstartsrv.log. (Error 11 Resource temporarily unavailable) [ntservsserver.cpp 1863]
    Instance on host eccprd01 started
    Instance on host eccprd01 started
    and the it repeats the following warnings on the /var/adm/messages till it fails to the other node
    Jun 4 12:26:22 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:25 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:25 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:28 eccprd01 last message repeated 1 time
    Jun 4 12:26:28 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:34 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:34 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:37 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:37 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:43 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:43 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:46 eccprd01 last message repeated 1 time
    Jun 4 12:26:46 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:49 eccprd01 last message repeated 1 time
    Jun 4 12:26:49 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:52 eccprd01 last message repeated 1 time
    Jun 4 12:26:52 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:55 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:55 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:58 eccprd01 last message repeated 1 time
    Jun 4 12:26:58 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:01 eccprd01 last message repeated 1 time
    Jun 4 12:27:01 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:04 eccprd01 last message repeated 1 time
    Jun 4 12:27:04 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:07 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:07 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:10 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:10 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:13 eccprd01 last message repeated 1 time
    Jun 4 12:27:13 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:16 eccprd01 last message repeated 1 time
    Jun 4 12:27:16 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:19 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:19 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:22 eccprd01 last message repeated 1 time
    Jun 4 12:27:22 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:25 eccprd01 last message repeated 1 time
    Jun 4 12:27:25 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:28 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:28 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:34 eccprd01 last message repeated 1 time
    Jun 4 12:27:34 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:37 eccprd01 last message repeated 1 time
    Jun 4 12:27:37 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:43 eccprd01 last message repeated 1 time
    Jun 4 12:27:43 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:46 eccprd01 last message repeated 1 time
    Jun 4 12:27:46 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dis
    can anyone one help me if there is any error on configurations or what is the cause of this problem.....thanks in advance
    ARSSES

    Hi all.
    I am having a similar issue with a Sun Cluster 3.2 and SAP 7.0
    Scenrio:
    Central Instance (not incluster) : Started on one node
    Dialog Instance (not in cluster): Started on the other node
    When I create the resource for SUNW.sap_as like
    clrs create --g sap-rg -t SUNW.sap_as .....etc etc
    in the /var/adm/messages I got lots of WAITING FOR DISPACHER TO COME UP....
    Then after timeout it gives up.
    Any clue? What does is try to connect or waiting for? I hve notest that it's something before the startup script....
    TIA

  • How can I install new versions of Fifefox on Solaris 9 Sparc?

    I use Firefox 2.0.0.20 on Solaris 9 Sparc, but I couldn't install any verions of Firefox major version 3.
    There is a great site, http://www.sunfreeware.com/mozilla.html, that looks it has a possibles version compatibles whit my OS, but the links don`t work.
    Any suggestions?
    More detail about my OS:
    Solaris 9 9/05 HW s9s_u9wos_06b SPARC
    Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
    se is subject to license terms.
    Assembled 25 September 2006

    Hi,
    Please also see [http://unixpackages.com/packages/mozilla this] (from http://www.sunfreeware.com/). It looks like 2.0.0.23 is the last supported version for Solaris 9.

  • Install newest JRE on Solaris 9 Sparc (64-bit)

    Note: This message has also been posted on the JRE forum. This is the second attempt to post it here.
    I would like to know the best method to replace the JRE that is installed with a Solaris 9 (SPARC) installation. A clean installation of Solaris 9 comes with JRE 1.4 and I would prefer 1.4.1 (64-bit) or newer. Sun provides self-extracting archive downloads of the latest JREs for Solaris, but I have been unsuccessful in using these. I followed the instructions at:
    http://java.sun.com/j2se/1.4.2/install-solaris.html
    for doing a self-extracting installation, but this does not replace the contents of /usr/j2se with the new JRE. Additionally a pkginfo still points to the old JRE. I also read the instructions at:
    http://java.sun.com/j2se/1.4.2/install-solaris-64.html
    which stated I should install the 32-bit version, and then the 64-bit version. Finally, both set of instructions mention installation from packages, yet I am unable to find the packages to download. What is the best method to remove the JRE from a Solaris installation and install a newer version of the JRE so the pkginfo is updated and the new JRE resides in /usr/j2se? Any assistance is appreciated.

    I found by issue "mount -v" that our disk slices are
    UFS type. So we don't need apply patch 5257399,
    right? Please confirm. Thanks!!!For your information, you are asking the user community to confirm, not Oracle. Some (many?) of us are not employed by Oracle.
    Therefore, the only answers you can get are from 'friends'. Nothing would be official and Oracle (and Oracle Support) would not be legally responsible.
    Your safest bet would be to escalate the request wityh Oracle Support.

  • Problems to install Oracle SOA Suite 11g on Solaris 10 SPARC-64

    I'm trying to install the Oracle SOA Suite 11g on Solaris 10 SPARC-64 but I´m having problems.
    I have already installed the JDK 1.6_11 for 64 bits and I use it for the SOA installation, the instruction is:
    ./runInstaller -jreLoc /export/home/adminsoa/Java1.6_11/jdk1.6.0_11
    I'm providing the absolute path to ensure take the correct JDK (JDK 64 bits).
    But I get the following error:
    bash-3.00$ ./runInstaller -jreLoc /export/home/adminsoa/Java1.6_11/jdk1.6.0_11
    Starting Oracle Universal Installer...
    Checking if CPU speed is above 300 MHz. Actual 1500 MHz Passed
    Checking Temp space: must be greater than 150 MB. Actual 5291 MB Passed
    Checking swap space: must be greater than 500 MB. Actual 39311 MB Passed
    Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-01-26_03-17-44PM. Please wait ...bash-3.00$ Log: /home/oracle/oraInventory/logs/install2010-01-26_03-17-44PM.log
    [ERROR]: Installer has encountered an internal Error. Contact Oracle support with details
    [EXCEPTION]:java.lang.reflect.InvocationTargetException
    I reviewed the log install2010-01-26_03-17-44PM.out and displays the following:
    Adding /tmp/OraInstall2010-01-26_03-17-44PM for deletion.
    Adding to classpath:file:/tmp/OraInstall2010-01-26_03-17-44PM/ext/jlib/soawl.jar
    Adding to classpath:file:/tmp/OraInstall2010-01-26_03-17-44PM/ext/jlib/template.jar
    [email protected]creenRes
    java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-01-26_03-17-44PM/oui/lib/solaris/liboraInstaller.so: ld.so.1: java: fatal: /tmp/OraInstall2010-01-26_03-17-44PM/oui/lib/solaris/liboraInstaller.so: wrong ELF class: ELFCLASS64 (Possible cause: architecture word width mismatch)
         at java.lang.ClassLoader$NativeLibrary.load(Native Method)
         at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1778)
         at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1674)
         at java.lang.Runtime.load0(Runtime.java:770)
         at java.lang.System.load(System.java:1005)
         at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.loadNativeLib(OiipuUnixOps.java:402)
         at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.<clinit>(OiipuUnixOps.java:125)
         at oracle.as.install.engine.modules.statistics.util.SysInfo.getAvailableMemory(SysInfo.java:161)
         at oracle.as.install.engine.modules.statistics.element.AvailableMemoryElement.<init>(AvailableMemoryElement.java:39)
         at oracle.as.install.engine.modules.statistics.standard.StandardElementLocator.loadElements(StandardElementLocator.java:63)
         at oracle.as.install.engine.modules.statistics.boot.ProfilerInitializer.initializeProfile(ProfilerInitializer.java:82)
         at oracle.as.install.engine.modules.statistics.Statistics.launchModule(Statistics.java:284)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at oracle.as.install.engine.InstallEngine.launchModule(InstallEngine.java:508)
         at oracle.as.install.engine.InstallEngine.processAndLaunchModules(InstallEngine.java:462)
         at oracle.as.install.engine.InstallEngine.startOperation(InstallEngine.java:415)
         at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:446)
    java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at oracle.as.install.engine.InstallEngine.launchModule(InstallEngine.java:508)
         at oracle.as.install.engine.InstallEngine.processAndLaunchModules(InstallEngine.java:462)
         at oracle.as.install.engine.InstallEngine.startOperation(InstallEngine.java:415)
         at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:446)
    Caused by: java.lang.UnsatisfiedLinkError: no oraInstaller in java.library.path
         at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1709)
         at java.lang.Runtime.loadLibrary0(Runtime.java:823)
         at java.lang.System.loadLibrary(System.java:1030)
         at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.loadNativeLib(OiipuUnixOps.java:420)
         at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.<clinit>(OiipuUnixOps.java:125)
         at oracle.as.install.engine.modules.statistics.util.SysInfo.getAvailableMemory(SysInfo.java:161)
         at oracle.as.install.engine.modules.statistics.element.AvailableMemoryElement.<init>(AvailableMemoryElement.java:39)
         at oracle.as.install.engine.modules.statistics.standard.StandardElementLocator.loadElements(StandardElementLocator.java:63)
         at oracle.as.install.engine.modules.statistics.boot.ProfilerInitializer.initializeProfile(ProfilerInitializer.java:82)
         at oracle.as.install.engine.modules.statistics.Statistics.launchModule(Statistics.java:284)
         ... 8 more
    [ERROR]: Installer has encountered an internal Error. Contact Oracle support with details
    [EXCEPTION]:java.lang.reflect.InvocationTargetException
    I think that the error would be caused by the JDK version with which try to initializing.
    Anyone have any idea about the possible error? Thanks in advance.

    Hi, I encourage you to try to use the generic installer at: %SOA_INSTALLER_DIR%/Disk1/runInstaller. Because if you are using the runInstaller at %SOA_INSTALLER_DIR%/Disk1/install/solaris it will lead to that problem in some cases.

  • Grid installation in solaris 10 (sparc)  with Suncluster

    While installing grid for cluster, node information table appears as blank.. while clicking "use cluster configuration file" option in that screen it shows that vendor clusterware detected. cluster configuration cannot be modified..
    If anyone knows how to resolve this problem, please post ur solution or if you have any procedure to install 11g r2 Grid infrastructure for a cluster in Solaris 10 sparc os with sun cluster 3.2, please send me the document to my email id- [email protected]

    I would suggest changing the media you burned it on. That always seems to be the issue with things like this. Search the forums for suggestions on what works.

  • Messages in the OS logs of Oracle Solaris on SPARC (64-bit)

    One of my Customer is getting following messages in the OS logs of the Oracle Solaris on SPARC (64-bit) machine.
    Feb 2 01:07:33 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
    Feb 2 03:07:43 ndc-m9k-2-r1 scsi: [ID 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
    Feb 2 03:07:43 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
    Feb 2 04:07:34 ndc-m9k-2-r1 oracle[7332]: [ID 566193 user.error] n2a get_local_info: ioctl (get interface flags): Interrupted system call
    Feb 2 05:07:52 ndc-m9k-2-r1 scsi: [ID 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
    Feb 2 05:07:52 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
    Feb 2 07:08:08 ndc-m9k-2-r1 scsi: [ID! 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
    Feb 2 07:08:08 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
    Feb 2 09:08:25 ndc-m9k-2-r1 scsi: [ID 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
    Feb 2 09:08:25 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
    There is a note # 833665.1 on this which states "The issue is caused by the Host Storage metrics collected by the agent" and also a Patch 8477122 has been created for this issue.
    However, there is nothing mention in the Note # 833665.1 about the following one message.
    Feb 2 04:07:34 ndc-m9k-2-r1 oracle[7332]: [ID 566193 user.error] n2a get_local_info: ioctl (get interface flags): Interrupted system call
    Can anyone please tell me
    1. whats the significance of the "oracle[7332]: [ID 566193 user.error] n2a get_local_info: ioctl (get interface flags): Interrupted system call" message in the OS log?
    2. Does this message get stops on applying of patch # 8477122 ?
    Thank you,
    Bhavin

    There are a number of known issues with the 10g agent on Solaris and patches are available. I assume you are running the 10.2.0.5 agent since you reference patch 8477122. If this is a brand new agent installation i would start with applying the latest PSU update which contains many related fixes. If you are still getting the error after this, open an SR with Oracle Support with your specific error message.

  • Solaris 9 Sparc

    Has anyone downloaded the zipped ISO's for Solaris 9 Sparc? I completed all three downloads and created the CD's from the ISO's. The install disk works fine. I'm having trouble with disk 1, it seems to be corrupt. In fact the ISO claims to to be 564 Mb but the CD only reports 262 Mb. I also used ISO Buster and used the extract utility. It too is reporting 262 Mb.
    I tried the Sun Download Manager thinking that I may have an issue with IE or my WinZip programs.
    I've burnt two disks using EZ CD Creator 5 and one disk using Nero.
    Anyone have any Ideas? I think the file is corrupt.
    I hope this is the right place to post this. Thanks

    There definitely seems to be something wrong with these zip files...
    I downloaded install, v1, v2 onto a solaris 8 system, "unzip install" works;
    "unzip v1" claims that end-of-central-directory signature not found. I've downloaded
    this file a number of times
    I downloaded v1 on a XP system w Sun DownLoad Manager, which unzips automagically
    after the download. Using Nero to try to burn the iso, hangs the Nero application.
    Sun does not seem to care about desktops any longer... After getting the 5th canned response
    from [email protected] resulting from my downloads; I replied with a summary of
    my troubles... Someone claiming to be a "Customer Service Specialist" send a somewhat
    insulting reply , caliming no technical help was available there & that I should consult
    the hardware compatibilty list. ie presumably my Ultra 5 with Solaris 8 is unable to unzip
    a sun generated zip file.

  • Could not locate new host added from Solaris 10 Sparc servers

    Hi All,
    I am having difficulty finding a new host (Stallion terminal server. e.g. jodie - 10.56.4.7) using ping on our Sun Fire T5220 Solaris 10 on our network, even though jodie has been updated to the DHCP (10.56.19.157) server and can be located from other hosts that runs Red Hat Linux and Windows XP. By restarting nscd daemon with the following commands did not help:
    # svcadm disable system/name-service-cache
    # svcadm enable system/name-service-cache
    Below is the static IP address detail for the Solaris 10 server:
    $ showrev
    Hostname: angel
    Hostid: 4e2f56yu
    Release: 5.10
    Kernel architecture: sun4v
    Application architecture: sparc
    Hardware provider: Sun_Microsystems
    Domain:
    Kernel version: SunOS 5.10 Generic_144488-12
    $ ifconfig -a                                                                  
    lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
            inet 127.0.0.1 netmask ff000000
    e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
            inet 10.56.120.12 netmask fffffe00 broadcast 10.56.121.255
    The same detail on a Red Hat Linux server that can locate jodie is:
    root@bobby /sbin>uname -a
    Linux bobby.abc.com 2.4.18-3 #1 ...... i686 unknown
    root@bobby /sbin/ifconfig -a
    eth0      Link encap:Ethernet  HWaddr 00:20:ED:5D:2F:94 
              inet addr:10.56.8.218  Bcast:10.56.15.255  Mask:255.255.240.0
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:653366594 errors:0 dropped:0 overruns:698544 frame:0
              TX packets:5815250 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:100
              RX bytes:2492338569 (2376.8 Mb)  TX bytes:1003467939 (956.9 Mb)
              Interrupt:10 Base address:0xd000
    lo        Link encap:Local Loopback 
              inet addr:127.0.0.1  Mask:255.0.0.0
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:145903 errors:0 dropped:0 overruns:0 frame:0
              TX packets:145903 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:12496874 (11.9 Mb)  TX bytes:12496874 (11.9 Mb)
    Likewise, the IP configuration on my Windows XP PC that can also see jodie after having flushed its local dns cache with "ipconfig /flushdns":
    C:\Documents and Settings\crystal>ipconfig -all
    Windows IP Configuration
            Host Name . . . . . . . . . . . . : BEATLE
            Primary Dns Suffix  . . . . . . . : musician.abc.com
            Node Type . . . . . . . . . . . . : Unknown
            IP Routing Enabled. . . . . . . . : No
            WINS Proxy Enabled. . . . . . . . : No
            DNS Suffix Search List. . . . . . : musician.abc.com
                                                abc.com
                                                abc.com
                                                com
    Ethernet adapter Local Area Connection:
            Connection-specific DNS Suffix  . : abc.com
            Description . . . . . . . . . . . : Intel(R) 82566DM Gigabit Network Connection
            Physical Address. . . . . . . . . : 00-19-BB-55-79-90
            Dhcp Enabled. . . . . . . . . . . : Yes
            Autoconfiguration Enabled . . . . : Yes
            IP Address. . . . . . . . . . . . : 10.56.3.91
            Subnet Mask . . . . . . . . . . . : 255.255.240.0
            Default Gateway . . . . . . . . . : 10.56.0.1
            DHCP Server . . . . . . . . . . . : 10.56.19.157
            DNS Servers . . . . . . . . . . . : 10.56.0.2,10.56.0.33What I suspect is the DNS configuration on angel (Solaris 10) to lookup DNS server (10.56.0.2, 10.56.0.33) is not correct, or that it is on another subnet (10.56.120.0) and require additional setup to see other hosts that do not belong to its own subnet. angel has only recently been built and its likely that its DNS setup has not been configured correctly.
    Other Solaris 10 Sparc servers on the same subnet 10.56.120.0 also experienced the same issue even though they have been around for a while. Nevertheless, their DNS configuration may have been manually configured to see certain subnets and not 10.56.4.0 where jodie lives.
    Any idea on where the problem lies?
    Thanks in advance,
    Crystal

    Hi All,
    I am having difficulty finding a new host (Stallion terminal server. e.g. jodie - 10.56.4.7) using ping on our Sun Fire T5220 Solaris 10 on our network, even though jodie has been updated to the DHCP (10.56.19.157) server and can be located from other hosts that runs Red Hat Linux and Windows XP. By restarting nscd daemon with the following commands did not help:
    # svcadm disable system/name-service-cache
    # svcadm enable system/name-service-cache
    Below is the static IP address detail for the Solaris 10 server:
    $ showrev
    Hostname: angel
    Hostid: 4e2f56yu
    Release: 5.10
    Kernel architecture: sun4v
    Application architecture: sparc
    Hardware provider: Sun_Microsystems
    Domain:
    Kernel version: SunOS 5.10 Generic_144488-12
    $ ifconfig -a                                                                  
    lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
            inet 127.0.0.1 netmask ff000000
    e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
            inet 10.56.120.12 netmask fffffe00 broadcast 10.56.121.255
    The same detail on a Red Hat Linux server that can locate jodie is:
    root@bobby /sbin>uname -a
    Linux bobby.abc.com 2.4.18-3 #1 ...... i686 unknown
    root@bobby /sbin/ifconfig -a
    eth0      Link encap:Ethernet  HWaddr 00:20:ED:5D:2F:94 
              inet addr:10.56.8.218  Bcast:10.56.15.255  Mask:255.255.240.0
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:653366594 errors:0 dropped:0 overruns:698544 frame:0
              TX packets:5815250 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:100
              RX bytes:2492338569 (2376.8 Mb)  TX bytes:1003467939 (956.9 Mb)
              Interrupt:10 Base address:0xd000
    lo        Link encap:Local Loopback 
              inet addr:127.0.0.1  Mask:255.0.0.0
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:145903 errors:0 dropped:0 overruns:0 frame:0
              TX packets:145903 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:12496874 (11.9 Mb)  TX bytes:12496874 (11.9 Mb)
    Likewise, the IP configuration on my Windows XP PC that can also see jodie after having flushed its local dns cache with "ipconfig /flushdns":
    C:\Documents and Settings\crystal>ipconfig -all
    Windows IP Configuration
            Host Name . . . . . . . . . . . . : BEATLE
            Primary Dns Suffix  . . . . . . . : musician.abc.com
            Node Type . . . . . . . . . . . . : Unknown
            IP Routing Enabled. . . . . . . . : No
            WINS Proxy Enabled. . . . . . . . : No
            DNS Suffix Search List. . . . . . : musician.abc.com
                                                abc.com
                                                abc.com
                                                com
    Ethernet adapter Local Area Connection:
            Connection-specific DNS Suffix  . : abc.com
            Description . . . . . . . . . . . : Intel(R) 82566DM Gigabit Network Connection
            Physical Address. . . . . . . . . : 00-19-BB-55-79-90
            Dhcp Enabled. . . . . . . . . . . : Yes
            Autoconfiguration Enabled . . . . : Yes
            IP Address. . . . . . . . . . . . : 10.56.3.91
            Subnet Mask . . . . . . . . . . . : 255.255.240.0
            Default Gateway . . . . . . . . . : 10.56.0.1
            DHCP Server . . . . . . . . . . . : 10.56.19.157
            DNS Servers . . . . . . . . . . . : 10.56.0.2,10.56.0.33What I suspect is the DNS configuration on angel (Solaris 10) to lookup DNS server (10.56.0.2, 10.56.0.33) is not correct, or that it is on another subnet (10.56.120.0) and require additional setup to see other hosts that do not belong to its own subnet. angel has only recently been built and its likely that its DNS setup has not been configured correctly.
    Other Solaris 10 Sparc servers on the same subnet 10.56.120.0 also experienced the same issue even though they have been around for a while. Nevertheless, their DNS configuration may have been manually configured to see certain subnets and not 10.56.4.0 where jodie lives.
    Any idea on where the problem lies?
    Thanks in advance,
    Crystal

Maybe you are looking for

  • Gmail Contacts Import Refuses My .CSV File

    I have created a file in Numbers of contacts for gmail. I have exported it as a .csv file and I selected Western Mac OS Roman (When this failed I tried Unicode and Windows Latin1) Both of those failed to be accepted by gmail too. Each time I try and

  • Text to Speech not working on Mac

    I downloaded a PDF file because it was not avaliable in ebook form. When I activated text to speech there was no output.

  • OD, Kerberos and DNS

    Hi, heres the debug log file when im trying to connect to Kerio webmail with an OD user get the following error 'Cannot resolve network address for KDC in requested realm' kinit <user> works fine though any clue ? tia Jeff [18/Nov/2010 16:20:37][2982

  • Tunneling

    HI EXperts what are step for doing tunneling (idoc-idoc).? any body help me regareding this . Thanks for hlep kumar

  • Labview drivers for Prisma QMS

    Hi, I'm looking for labview drivers for the Prisma Quadrupole Mass Spectrometer from Pfeiffer Vacuum. If possible also a simple rest gas analysis (RGA) VI. Can anyone help? Hans Rosink