10.2.0.4 agent patchset is out ..

See patch number 3822442.

Can you verify that patch #; all I see is 10.2.0.3 for all platforms.
Description      PATCHSETS FOR DEPLOYING VIA PUSH METHOD FROM GRID CONTROL
Product      Intelligent Agent
Select a Release
Platform or Language Click for more information about this option
Last Updated      01-FEB-2007
Size      528M (554306700 bytes)
Patchsets known to include or supersede Patch 3822442 Click for more information about this option

Similar Messages

Agents keep logging out after transferring a call internally

Guys,
I have an issue regarding the UCCX agent functions of transfeering call internally.
- Reported issue was one extension was not working
- The user did initial steps to correct the issue such as logging out of the cisco desktop agent clearing the phone and logging back in.
- The steps done by the user did not work
- I asked the user to log out and I unplugged the phone basically doing a hard restart
- After the restart I asked the user to log in again and it was working.
Any idea why the agent is going out of service everytime it transfer the call ot another agent?
Thanks,
Erik

Hi Erik,
Please post the Agent logs.
Thanks,
Anand

"server agent has time out "issue

Hi,
I am developing a report app to generate thousands of report using ReportClientDocument. most of the reports can be successfully exported, but a few hit this error: server agent has time out", when I invoke the following line of code:
ByteArrayInputStream byteIS = (ByteArrayInputStream) clientDoc.getPrintOutputController().export(ReportExportFormat.PDF);
clientDoc is a instance of ReportClientDocument. is it because clientDoc is time out? when this error is thrown, I checked the status of the clientDoc using clientDoc.isOpen(), and the value is true. any idea why this error happened?

Do you need to use RAS?
Can you use the Page Server via the Viewer SDK (ReportExportControl) to get the export instead?
With regards to scaling for report processing throughput, the Page Server is more efficient than RAS, and the Job Server is more efficient than the Page Server.
So if your throughput bandwidth exceeds RAS, the recommendation (if you don't want to deploy more RAS servers) is to use the Page Server. If throughput exceeds the Page Server, then to schedule-wait-stream using Job Server.
RAS has more overhead, since it's meant primarily for report creation/modification/introspection, where the Page Server is for viewing and export.
Sincerely,
Ted Ueda

The agent extension is out of service. error

The agent extension is out of service.
ready state change and call control operations cannot be performed.
The agent extension is back in service.
all operations are back in service.
I get this when the agent is just sitting there in a ready state.
CUCM 7.0 UCCX 7.0
I would appreciate any help you can offer.
Dave 404 569-1752
[email protected]

The most common cause of this was the agent's phone restarted or a CTI interruption occured. This is typically something to start troubleshooting on UCM side. The CAD Troubleshooting Guide says essentially the same thing:
Problem The agent’s state changed to Not Ready for no apparent reason.
Symptom. In some situations, an agent’s state may change to Not
Ready for no apparent reason.
Cause. To determine the reason, check the reason code:
..other causes removed...
■ If the reason code is 32759, the agent’s state became Not Ready
because the phone went out of service. Check to make sure the
phone is still functional and that you can call the phone directly. If
everything seems fine, it is most likely a temporary problem and the
phone has since recovered. If the phone is still down, it is most
likely a Unified CM problem. Please consult Unified CM support.
Solution In many cases, an agent’s state becoming Not Ready is not a serious
issue. Simply click Ready to change the agent’s state to Ready.
To determine the reason code, do one of the following:
...other solutions removed...
If the reason code is 32759, the agent’s state became Not Ready
because the phone went out of service. Check to make sure the
phone is still functional and that you can call the phone directly. If
everything seems fine, it is most likely a temporary problem and the
phone has since recovered. If the phone is still down, it is most
likely a Unified CM problem. Please consult Unified CM support.

Multiple Process agents to send out single message

Is it possible for multiple Outbound agents to send out a single generic message? For example 2 AP BO's, Lead and Opportunity both would require to send out a generic message to another BO in a different DU. If yes, how could this be acheived?

it use appleID for the whole communication model so you would not be able to msg her using imassages as that would imply that you're sending yourself an message

Health service agent state greyed out.

I am having an issue with the Health Agent state and all of the agents are greyed out. I have checked all the servers and the health service is running on all the agents and the rms. I have restarted the service, deleted the health state folder,
tried to repair the agents and still greyed out. has anyone run into this issue need assistance. scom 2010

Have you tried the following steps.
http://support.microsoft.com/kb/2288515
http://blogs.technet.com/b/kevinholman/archive/2009/10/01/fixing-troubled-agents.aspx
Juke Chou
TechNet Community Support

IPCC "The agent extension is out of service"

We are using IPCC 4.0(3)_Build080, we have setup a new user in the system like everyone else. When this user tries to go into a ready state in the agent desktop he gets the following error:
13:16:20 Cannot go to the ready state while the phone is out of service. Other state changes are possible.
13:16:20 The agent extension is out of service.
Ready state change and call control operations cannot be performed.

Hi guys,
Solution, for us, was to delete the phone from CUCM, and recreate it.
This process took less than 1 minute…
I located the device (phone) in CUCM by MAC address and deleted it.
All of our Service Desk phones are identical in config (they are setup for Extension Mobility to allow for desk sharing) - so I simply "super-copied" another SDA phone using the problematic phone's MAC, and changed the description.
Next I associated the 'newly created' device with the RMCM application user (User Management > Application User > < whatever username you gave for your UCCX RMCM username>).
Once the new "old" device had registered, Joe Bloggs logged in with his extension mobility login, logged into CAD, and was able to go 'Ready'.
Solved.
Information/background and initial troubleshooting:
We are on...
CUCM 8.0.2.40000-1
UCCX 8.0.2.11004-12
CAD 8.0.2.400 (says 8.0(2) at startup, the 'about' shows 8.0.2.400)
We had the issue this morning where Joe Bloggs (SDA) was able to login to his phone (extension mobility), login to CAD (Cisco Agent Desktop), but could not go ‘Ready’ state.
He was being presented the following error:
     07:20:29 Resource's Device is Off.
     07:20:29 The agent extension is out of service.
     Ready state change and call control operations cannot be performed.
I logged into his device (phone) as myself and then logged into CAD. I was presented with the same error when attempting to go 'Ready'.
Other SDA’s with the same device (phone) and device profile (extension mobility) config did not have any trouble on their phones – so appeared to have been a phone issue - or at least an issue between CUCM and the device.
I had Joe Bloggs perform the factory default reset (unplug network cable, holding # - plug back in network cable, when line buttons flashed in sequence type 123456789*0#) – after reset, tested again, made no difference - the error persisted.
Next, I disassociated Joe Bloggs from the DN (Directory Number/Extension) and then disassociated both the device and the device profile (ext. mobility) from RMCM ‘Application User’, saved – then re-associated – made no difference, the problem continued.
Not sure why it happened - appears as though maybe the record of this particular device had become corrupt in CUCM somehow.
Hope this helps someone else - as it was a lot quicker (for our setup) than disassociating user extensions and devices, etc.
Cheers,
Brett

Agent Desktop logging out frequently !!

User is reporting that they periodically get logged out from the agent desktop application every 30 minutes. This happens frequently. A message appears on our desktop(cisco agent desktop application) in a grey box saying the time and connection lost
Thanks !!
Shridhar Reddy

Anand,
I could see the below Error meassages in affected CAD log(client)
INFO AcmiClnt0004 Error receiving sockets message header. Error(15:failed to read from socket)
ERROR AcmiClnt2004 Error occured when receiving message from cti server. Error(15:failed to read from socket).
2011-09-13 11:05:32:253 ERROR FCCC2005 Network communication error (COMM_FAILURE).
2011-09-13 11:05:32:253 ERROR FCCC2015 The connection to the Desktop Chat Service has been lost. The program will attempt to reconnect automatically.
2011-09-13 11:05:32:253 INFO DAGT0000 Call Chat auto-recovery message received.
2011-09-13 11:05:32:253 ERROR DAGT3062 Chat SetAgentAcdState failed.
11:05:35:467 INFO AcmiClnt0001 Failed to send message to the cti server. Error(failed to send message to cti server).
ERROR VOIP2021 Desktop monitoring enabled for extension [89995732].
2011-09-13 11:07:04:157 INFO VOIP4009 Adding the VoIP service [UKVEUUCCX02] to the list of active VoIP services.
2011-09-13 11:08:01:614 ERROR FCCC2015 The connection to the Desktop Chat Service has been lost. The program will attempt to reconnect automatically.
Thanks !!
Shridhar Reddy

Agent workmodes greyed out

Hi Guys
We are working on CRM 4.0. Our SAP CRM is integrated with third party CTI vendor i.e Interactive Intelligence. All the integration is done and we can see the channels and queue information appearing on the agent dashboard from the telephony system. But the agent workmodes Ready/Not Ready appear on the webclient, but they are greyed out. So we can't activate any particular mode, so we can't simulate any calls. What is the reason behind those workmodes being greyed out.
Your help would be highly appreciated.
Thanks
Hari

Hello.
We had the issue with the Agent Workmode options disabled or 'Greyed out'
We have a generic simple install of CRM 6.0 on Netweaver 7.0.1 Oracle 11.
We had a successful installation in QA, but when we pushed a database restore (Oracle) to create our Production Server, this issue arose.The Agent Status button became grey and we could not make calls inbound/outbound. The BCM however could make calls.
Fix:
1. We deleted the CRM configuration and followed the SAP Guide on installation (Rule, RFC, Channels etc) 1 hour.
2. We noticed in the ICM Trace (/nsmicm) => Trace=> Display Trace that the below memory error appeared
[Thr 01] DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
[Thr 01] **** INFO SHM 31 in POOL 10     9386 KB estimated      6238 KB real (   -3148 KB    -34 %)*[Thr 01] MPI: dynamic quotas disabled.
[Thr 01] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
[Thr 01] CCMS: initialize CCMS Monitoring for ABAP instance with J2EE addin.
[Thr 01] CCMS uses Shared Memory Key 73 for monitoring.
[Thr 01] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
So we changed this in the RZ10 Instance Profile (search for 'ipc' ) and we adjusted Pool 10 from 1.5gb to 2.0gb.
===
Also watch your SICF services (Tranaction /nsicf )
The Core one that stops logins first is         /default_host/sap/bc/bsp/sap/crm_ui_start
Activate at the 'Indvidual' level, not the Folder Level. Erratic issues arise, don't just activate everything. Be specific.
It took several notes to compile the necessary services for SAP CRM 6.0 Netweaver 7.01 and BCM 6.0.10.26
(We hotpacked to Hotpack 26)
The Notes we used were
SAP Note 517484 Inactive services in the Internet Communication Framework
SAP Note 1295006 - Mandatory SICF services for IC WebClient
SAP Note 1115493
SAP Note 517484
The BCM and VU's once installed are normally stable. Get your Windows Administrator to give you access to the logs. They provide a wealth of troubleshooting information.
Look specifcally in the "ALL VU" logs, Core Logs (This refers to the Core Switch the network or VLAN is configured)
Good transactions to Trace the CRM interactions are as follows:
1. /ncrm_bcm_adm   * Maintain Connections
2. /ncrm_icm_mcm_ccadm * Maintain System Settings
3./ncrm_icm_emailx * Define E-mails
4. /ncrm_ic_ltx_urls   * Define URL and Parameters

Agents getting kicked out of Talking status to ready status on Queue calls

Hello All,
We have an odd problem. Some of our agents are complaning that they are randomly getting kicked out of talking status and going into a ready state while on a queue call.
For example an agent will be on a queue call and talking and UCCX will put them into a ready state while having recieved a call from the queue and still on that queue call.
On the agent phone there are two extensions (7945 IP Phone). Extension 2110 which is the queue number and 2500 which is a extesnion that is shared on several diffrent phones by the agents. 2110 is set to 2 calls and set to 1 as a busy trigger. 2500 is set to 4 calls and busy trigger of 2. Both extesnions are not part off any hunt groups and 2500 is the only one that is on several diffrent phones.
The agents do use extension mobility to sign into the phones since they rotate desks. We are running the enhanced version of contact center express System version: 8.5.1.11003-32.
The agents are using the cisco desktop agent.
Thanks for any help or advice,
Dan

Hi Dan,
Unsupported Configurations for Agent Phones
The following configurations are not supported for agent phones:
•Two lines on an agent’s phone that have the same extension but exist in different partitions.
•A Unified CCX extension assigned to multiple devices.
•Configuring the same Unified CCX extension in more than one device profile, or configuring the same Unified CCX extension in any combination of device profiles and devices. (Configuring an Unified CCX extension in a single device profile is supported.)
•In the Unified CM Administration Directory Number Configuration web page for each Unified CCX line, setting Maximum Number of Calls to a value other than 2.
•In the Unified CM Administration Directory Number Configuration web page for each Unified CCX line, setting Busy Trigger to a value other than 1.
•Configuring a Cisco Unified IP Phone with Secure Real-Time Protocol (SRTP) for use in silent monitoring and recording.
•No Cisco Unified Communications Manager device can be forwarded to the Unified CCX extension of an agent.
•The Unified CCX extension of an agent cannot be configured to forward to a Cisco Unified CCX route point.
•Use of characters other than the numerals 0–9 in the Unified CCX extension of an agent.
•Configuring the Unified CM intercom feature.
•Configuring the hold reversion feature.
Agents are not moved to "Not Ready" state by "Dropped Event" in workflow in case the agent got reserved for next call.
Reference:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/release/guide/uccx851rn.pdf
Hope this helps.
Anand
Please rate helpful posts !!

Issues with Agents being logged out.

All the agents on aperticular PIM were logged out and could logback in after approx 7 minutes.Wheni check teh CTIOS logs now its full of the below error message
12.333 ClientMgr[1]::DistributeEvent(eOnNewSkillGroupStatisticsEvent), FAILED to find
Client[0006].
Can you please let me know if this is service affecting or its something critical ?

-We are seeing issues with agents trying to log in and getting timeout errors, taking 3-5 times to actually login/JTAPI errors. Supervisor application is having the same issues. We have full IP Visibility from all subnets. The CUCM/CCX servers were put in last August, and we had zero issue up until the past few weeks. Ive validated the agent settings, JTAPI users etc and Ive rebooted the UCCX server as well

UCCX 10.5 CAD agent cannot log out

UCCX version 10.5.1.10000-24
CAD agent can log in, go ready/not ready just fine. But when agent hits the logout button, it fails.
CAD logs shows logout failure as below. Trying to figure out why agent can't log out and how to fix it.
2015-01-08 16:37:42:747 DEBUG [0x2fdc] Configuration.cpp[978] GetLocalConfigPath: CC0978                Local Path: C:\Program Files (x86)\Cisco\Desktop\
2015-01-08 16:37:42:747 DEBUG [0x2fdc] MainFrm.cpp[1265] CMainFrame::ACDLoginLogout: MF1265 User clicked ACD LOGIN/LOGOUT button
2015-01-08 16:37:42:748 DEBUG [0x2fdc] MainFrm.cpp[1390] CMainFrame::ACDLoginLogout: MF1390 User clicked ACD LOGOUT button
2015-01-08 16:37:42:748 DEBUG [0x2fdc] AgentStateManager.cpp[1125] CAgentStateManager::SetReasonCode: Begin.
2015-01-08 16:37:42:748 DEBUG [0x2fdc] AgentStateManager.cpp[1125] CAgentStateManager::SetReasonCode: End.
2015-01-08 16:37:42:748 DEBUG [0x2fdc] AgentStateManager.cpp[155] CAgentStateManager::HandleRequest: Begin handling agent state change request. Use <PromptedReasonCode=0> to SetAgentState.
2015-01-08 16:37:42:748 DEBUG [0x2fdc] CJToolbars.cpp[679] CCJMainToolBars::CheckButton: set check for <Login> to true
2015-01-08 16:37:42:748 DEBUG [0x2fdc] PhoneDev.cpp[506] SetAgentState: Begin. Set Agent State AS_LOGOUT       , Invoked ID 9, AgentID joeb, DeviceID 7004, PeripheralID 1, reasonCode 0, ForcedFlag 0
2015-01-08 16:37:42:750 DEBUG [0x2fdc] PhoneDev.cpp[586] SetAgentState: Set Agent state to AS_LOGOUT         NOT successful
2015-01-08 16:37:42:750 DEBUG [0x2fdc] PhoneDev.cpp[506] SetAgentState: End.
2015-01-08 16:37:42:750 DEBUG [0x2fdc] AgentStateManager.cpp[200] CAgentStateManager::HandleRequest: ASM0200 The agent state change succeeded
2015-01-08 16:37:42:750 DEBUG [0x2fdc] CJToolbars.cpp[679] CCJMainToolBars::CheckButton: set check for <Login> to false
2015-01-08 16:37:42:750 DEBUG [0x2fdc] AgentStateManager.cpp[260] CAgentStateManager::HandleRequest: ASM0260 End handling agent state change request

Certainly something to try, but I don't see why that would make a difference in an inability to log out. I have many customers who only use the default workflow and haven't seen any of them with this issue previously.
Are you guessing here, or have you actually seen that resolve similar problems?

When starting oem Agent ir error out with java.lang.NoClassDefFoundError: o

Hi ,
Facing below error when starting oem agent with comand

./emctl start oms
Oracle Enterprise Manager 10g Release 4 Grid Control
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
opmnctl: opmn is already running
93938978
ADMN-202045
An exception occurred while constructing the OracleAS Repository API, a DCM dependent component.
Resolution:
This exception may be occurring because the ias.properties file is misconfigured.
Check the exception thrown by the OracleAS Repository API for any additional resolution information.
Base Exception:
java.lang.NoClassDefFoundError
oracle/security/jazn/util/JAZNSecurityManager
java.lang.NoClassDefFoundError: oracle/security/jazn/util/JAZNSecurityManager
at oracle.ias.sysmgmt.persistence.SeedDbAccess.<init>(Unknown Source)
at oracle.ias.sysmgmt.persistence.SeedDbAccess.getDbAccess(Unknown Source)
at oracle.ias.sysmgmt.persistence.SeedDbAccess.getDbAccess(Unknown Source)
at oracle.ias.sysmgmt.clustermanagement.ComponentTypeFactory.init(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
at oracle.ias.sysmgmt.cmdline.DcmCmdLine.checkInit(Unknown Source)
at oracle.ias.sysmgmt.cmdline.DcmCmdLine.execute(Unknown Source)
at oracle.ias.sysmgmt.cmdline.DcmCmdLine.main(Unknown Source)
Starting HTTP Server ...
Starting Oracle Management Server ...
Checking Oracle Management Server Status ...
Oracle Management Server is Down.

Error 1858: The connection with Remote Managment Agent had timed out.

Every workstations seem the same result. I cannot remote or execute file.
Please help me. Thanks
Ps. All of them install Zenwork 6.5 Agent only ,which was deployed at the
sub branch, connected to the same server which using NAT IP address.

On Thu, 16 Dec 2004 11:54:47 GMT, [email protected] wrote:
> Ps. All of them install Zenwork 6.5 Agent only ,which was deployed at the
> sub branch, connected to the same server which using NAT IP address.
hmm.. same issue like your other mail?
Marcus Breiden
Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

10.2.0.4 patchset is out

F.Y.I

HI Steffen
Yes there are a lot of bugs resolved in the latest patch. The one I found most useful was the case where upgrade table option failed with error "RTC-5270 Invalid Upgrade Plan"
This has been fixed now. There are a host of other bugs too which have supposedly been fixed
Resolved Issues
The following is a list of issues resolved in Oracle Warehouse Builder 10g Release 2 (10.2.0.4).
3992231 ERROR WHEN TRYING TO SEE THE COLUMN DATA TYPE IN KEY LOOKUP
4956010 ERRORS AFTER OPENING A MAP IN READ-ONLY MODE
5115574 PB IN EXPRESSION BUILDER WHEN USING PRIVATE FUNCTIONS WITH OBJECT TYPES
5242201 COMMIT FREQUENCY AND MAX ERRORS HAS NO EFFECT
5368252 MAPPING SEQUENCE TO TABLE WARNINGS ON DEPLOYMENT
5507628 TABLE IMPORT WITH MORE THAN 1000 PARTITIONS HANGS
5519895 VLD-1141 VALIDATION ERROR AFTER UPGRADING DESIGN REPOSITORY FROM OWB 10.1.0.4
5526905 INVALID MDL FILE AFTER COPY OF PLUGGABLE MAPPING FOLDER IN NEW PROJECT
5579903 CONSTANT API0259: THE OBJECT CANNOT BE EDITED IN READ ONLY MODE ERRORS
5605402 PROFILE TABLE HAVING TWO COLUMNS WITH NAMES SAME TO 26 CHAR FAILS API-0408
5631422 DEPLOY FAIL WHEN SET ACTION IS ''UPGRADE'' - /USR/LIB/HPUX32/DLD.SO: UNABLE TO F
5659356 QA: REG :JNP IMPORTING THE SAME MDL TWICE
5705198 LOADING PROPERTIES CHANGED AFTER MDL EXPORT/IMPORT (VLD-2750)
5708683 ORA-06502 NUMERIC OR VALUE ERROR WHILE PROFILING TABLES
5742116 ACTIVITY PARAMETER CAN BE BOUND TO ANOTHER ACTIVITIES OUTPUT - DEPLOY FAILS
5745966 INBOUND SYNCHRONIZATION OF TARGET TABLE DOES NOT WORK.
5864566 DATA VIEWER CANNOT GET CORRECT TIME WITH TIMESTAMP COLUMN
5864953 TOO OFTEN SHOWED: PRS-00503: YOU DO NOT HAVE PRIVILEGE:
5874426 TABLE UPGRADE FAILS WITH RTC-5270
5929001 DEPLOYMENT OF TABLE WITH UPGRADE PLAN FAILED WITH RTC-5270
5931375 OMBRETRIEVE COLLECTION DOES NOT WORK FOR VARYING_ARRAY AND NESTED_TABLE
5957354 MAPPING WITH TABLEFUNCTION VALIDATES BUT GENERATED CODE IS INVALID
5998179 KEY LOOKUP GIVES INCORRECT SQL WHEN USED WITH A CONSTANT OPERATOR AS SOURCE
6024930 IMPORT OF A PARTITION TABLE FROM TARGET DATABASE DOES NOT HOLD PERTAIN METADATA
6025865 AFTER IMPORTING PLSQL PACKAGE, OWB EXPRESSIONS RAISED VALIDATION ERRORS
6041726 REPOSITORY BROWSER CANNOT MANAGE A HUGE AMOUNT OF AUDIT DATA
6045890 LOADING HINT ON DIMENSION OPERATOR NOT WORKING PROPERLY.
6068821 CC_MIGRATE.SH NOT DETECTING TARGET LOCATION AS DEPLOY CANDIDATE
6113136 WRONG EXPRESSION IN EXPRESSION OUTGROUP ATTRIBUTE AFTER EXPORT/IMPORT
6121595 AFTER DROPPING USER, UNABLE TO ACCESS MAPPING OWNED BY THIS USER
6125093 EXPRESSION VALIDATION FAILS WITH CUSTOM PACKAGE USING TYPES
6147633 CODE GENERATED BY OWB 10.2 FOR VARIABLES WON'T EXECUTE IN PARALLEL
6174856 OWB10GR2 USES DB LINK WHERE AS OWB10GR1 USES SCHEMA NAME WHEN USING SQL*NET
6178565 OWB 10.2.0.1.0.DATA PROFILE WITH ROW RELATIONSHIP DISCOVERY IS FAILING
6192353 GETTING PLS-00201: IDENTIFIER 'WB_LOOKUP_NUM' MUST BE DECLARED
6208096 BACK-PORT FIX OF BUG 5664351 TO 10.2.0.4
6255056 VALIDATION OF TABLE FAILS WITH VLD-0005: ORACLE.WH.REPOS.SDK.EXCEPTIONS
6270894 OWB USERS ARE UNABLE TO ACCESS CONTROL CENTER OR EDIT LOCATIONS
6273371 FORWARD PORT BUG 6159644 TO 10.2
6278918 IMPORT OF TABLES FROM DB2/400 USING TG4DRDA FAILS: ORA-00604, ORA-28500
6310069 MAPPING DOES NOT GENERATED DATABASE LINK WHEN USING NET*SERVICE NAMES
6311981 HOW TO DISABLE HINTS FROM BEING AUTOGENERATED IN THE MAPPING CODE
6312387 REQUIRED COLUMN IS SET TO YES EVEN FOR INPUT PARAMETERS WHICH ARE NULL
6314767 RTC-5161 DEPLOYING PROCESSFLOWS AFTER UPGRADING TO OWB 10.2.0.2
6319584 ORA-2063 ORA-01002 WHEN PROFILING DB2/400 TABLE ACCESSED BY VIEW VIA OTG-DRDA
6326693 INCORRECT CODE GENERATED FOR MAPPING : NUMBER(0,0) LEADS TO ORA-01727
6328509 PLS PROVIDE ONE-OFF PATCH FOR BASE BUG 6314767 ON TOP OF 10.2.0.2 FOR WIN 2003
6370058 SCHEDULED PROCESS FLOWS ONLY EXECUTE ONCE
6408329 DESCRIPTION DOESNT ALLOW MORE THAN 2000 CHARECTERS FOR VARCHAR2(4000)
6411475 10.2.0.3 SCD TYPE 2 : INCORRECT VERSIONING OF THE CHILD LEVELS
6429462 VLD-1108 ERROR WHEN ATTEMPTING TO VALIDATE A MAPPING
6434510 OWB 10GR2 : OWF LOCATION REGISTRATION WIZARD - MISSING R12 VALUE IN THE LOV
6437978 UNABLE TO USE THE EXISTING DB LINK OPTION FOR THE DB CONNECTOR
6450227 GENERATED CODE FOR A MERGE USING A SEQUENCE IN AN EXPRESSION DOES NOT EXECUTE.
6474332 IMPORT DOES NOT PERSIST CFA'S DESPITE THE LOG SHOWING THEM AS ADDED
6497676 ERROR RAISED BY CUSTOMER PROCEDURE NOT DISPLAYED
6507476 MULTI-INSERT MAPPING - ROWS DUPLICATED IN THE TARGET TABLES
6508051 "AND" ACTIVITY IN PROCESS FLOW DOESN'T WAIT FOR ALL INCOMING PROCESSES TO FINISH
6508649 ERRORS GENERATED WHEN DEBUGGING A MAPPING IN OWB.
6510560 SLOW PERFORMANCE ON 2ND LOAD OF SCD TYPE2 DIMENSION WITH MANY RECORDS IN TARGET
6513102 CO_UK_NAME VIOLATION DURING MIGRATION OF RUNTIME AUDIT DATA
6522361 CC_MIGRATE FAILS WITH ORA-00904:"SDA"."ADAPTER_NAME": INVALID IDENTIFIER.
6601542 DEPLOYING PROCESS FLOW FAILED WITH ERROR RTC-5161
6622123 NO OPTION TO DEPLOY ADVANCE QUEUE IN OWB 10.2.0.2
6629079 10.2.0.3 : NULL POINTER EXCEPTION WHEN COMMIT CONTROL SET TO MANUAL
6642763 OWB 10G CERTIFICATION WITH DATABASE 11G
6645650 WHEN IMPORT A TABLE GOT ORA-00997: ILLEGAL USE OF LONG DATATYPE
6656454 PRIOR VALUE CALCULATIONS FOR MEASURES NOT WORKING PROPERLY
6658616 ENT-06972: ERROR WHILE DISPLAYING BIBEAN FOR DIMENSION DATAVIEWER.
6664381 BROWSER DOES NOT USE PLATFORM PROPERTIES TO MODIFY PURGE PROCESS
6667700 EXTRACTION HINT CAUSES INCORRECT CODE TO BE GENERATED
6670563 FORWARD PORT BUG 6527943 INTO 10.2.0.4
6671456 TABLE WITH "HASH BY QUANTITY" PARTITION DOES NOT GENERATE CORRECT CODE
6709113 RE-IMPORTING A MAPPING SETS THE LOCATION TO UNKNOWN VALUE
6726840 LOADING HINT CAUSES INCORRECT CODE TO BE GENERATED
6733019 ORA-00904 WHEN DEPLOYING MERGE MAP, HAVING SEQUENCE AS INPUT FOR NVL EXPRESSION
6797890 TARGET LOAD ORDER IS NOT CONSIDERED FOR ROW-BASED PROCESSING
6798489 MDL IMPORT OF A PLUGGABLE MAP FAILS WITH MDL1261: ERROR IMPORTING DUMMYCFA
6811099 OUI INSTALLER ERRORS: FILE NOT FOUND: DTUPG1102TO10203_10GR1.SH
6811383 11G PASSWORD CASE SENSETIVITY NOT WORKING, PASSWORDS ARE UPPERCASED
6815310 THE UPGRADE SCRIPTS DTUPGXXXTOXXX.SH DON'T HAVE EXECUTE PERMISSIONS
6815343 RAB WON'T DISPLAY RESULTS FROM 11G REPOSITORY.
6815718 PARENT LEVEL DATA MISSING AFTER EXECUTING TYPE 1 DIMENSION LOAD MAP
6815724 REG: MAP WITH TABLE FUNCTION - CARTISIAN PRODUCT GENERATED
6823539 INVALID OBJECTS WHEN INSTALLING 10.2.0.4 REPOSITORY ON 11G DATABASE
6823847 11G PASSWORD CASE SENSITIVITY NOT PROPERLY HANDLED BY LOCATIONS
6835094 11G PSWD IS CASE SENSITIVE, TARGET USER CREATION IS UPPERCASING SYS PASSWORD
6835155 REG: EXTRA RECORDS CLOSED WHEN LEVEL EFFECTIVE DATE CONNECTED FROM SOURCE
6835188 INCORRECT ABAP CODE GENERATED FOR SAP ECC6.0 PATCH LEVEL 7
6843461 DATA PROFILER IS GIVING ERRORS (ORA-00942: TABLE OR VIEW DOES NOT EXIST)
6843805 EXPORT OF PROCESS FLOWS WITH ALL DEPENDENCIES DOES NOT CONTAIN ALL DEPENDENCIES
6859419 REG: MAPS WITH PROCEDURE OR PREMAP TRIGGER - FAIL ROW_BASED EXECUTION
6864029 AFTER SYNCHRONIZING A TARGET TABLE OPERATOR, HINTS APPEND AND PARALLEL APPEAR
6865659 MAP TO LOAD SCD2 DIMENSION - BUFFEROVERFLOWEXCEPTION WHEN GENERATE
6868659 CO_FK_PARENT_CO PARENT KEY NOT FOUND DURING MIGRATION
6871036 BACKPORT OF FIX FOR 6871024 (CCM MESSAGE PERFORMANCE) TO PARIS
6897024 WAREHOUSE UPGRADE FAILS WITH 11G RDBMS, 11G PASSWD CASE PROBLEM
6897043 WORKFLOW INVALID USER/PASSWORD WHEN DEPLOYING A PROCESS FLOW ON 11G RDBMS
6897108 BIDEMO FAILS TO CREATE CONNECTOR WITH 11G RDBMS
6897128 UNABLE TO CREATE TIME DIMENSION IN BIDEMO ON 11G RDBMS
6897157 REG: OPTIMIZE MERGE IS NOT WORKING (REG FROM 10.2.0.3)
6900328 SINGLE LEVEL TYPE 2 DIMENSION LOAD - HANG ON MAP EXECUTION
6912718 UNABLE TO COPY/PASTE, SNAPSHOT PACKAGE INVALID IN 11G RDBMS
6927052 REG: REPOS VERSION IS NOT UPGRADED WHEN UPG102TO10204.SQL RUNS
6932465 LOCATION EDITOR FOR ORACLE DB DOES NOT SUPPORT 11.1 AFTER REPOS UPGRADE
6933909 UNABLE TO START CONTROL CENTER WITH 11G RDBMS
6950816 10.2.0.4 WITH 11G DB: CANNOT SET MODULE PL/SQL GENERATION MODE TO ORACLE11GR1
6954161 CANNOT DEPLOY ERROR TABLE FOR DATA AUDITOR
6966817 VALIDATION ERROR USING OMBDEPLOY
6970141 REG: UPGRADED DATA PROFILES FAILING - JNPES OR COMPILATION ERRORS
6976639 MIGRATION PATH FROM DB 10G TO DB 11G NOT AVAILABLE
7003209 CLONING REPOSITORY FROM WINDOWS TO LINUX : LOCATION_UTIL.SH FAILS
7005587 ORACLE 10GR2 WAREHOUSE BUILDER PATCH 10.2.0.4
7026206 NEED TO BE ABLE TO LOAD CONTROL CENTER METADATA INTO EXISTING CC-REPOSITORY
7146953 ./INSTALL_10204_PROFILES.SH (PERMISSION DENIED), DOES NOT HAVE EXECUTE BIT SET
7156085 ISSUE WITH OWB MAPPINGS FOR MOLAP DIMENSIONS AS TARGET
7193221 JAVA.SQL.SQLEXCEPTION RUNNING INSTALL_10204_PROFILES.BAT
7195786 TYPE 2 SNOWFLAKE DIMENSION LOADING WITH HIERARCHY VERSIONING NOT WORKING
7208261 REG: INSERT/UPDATE IS BROKEN,VLD-2750 WHEN TGT TBL KEY IS PROPERLY MAPPED
7208637 REG: DEFAULT TARGET LOAD ORDER IS BROKEN FOR FK RELATED TARGETS
7212104 CC_MIGRATE NOT WORKING PROPERLY ON WINDOWS
cheers
birdy

10.2.0.4 agent patchset is out ..

Similar Messages

Maybe you are looking for