10.2.0.4 RAC, DBCA error

Encountered the following error while creating database on 10.2.0.4 RAC:
alert_gsnrac1.log:
SMON: enabling cache recovery
Tue Sep 1 23:08:23 2009
Errors in file /u01/admin/gsnrac/udump/gsnrac1_ora_2050.trc:
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Tue Sep 1 23:08:23 2009
Error 704 happened during db open, shutting down database
USER: terminating instance due to error 704
Instance terminated by USER, pid = 2050
ORA-1092 signalled during: alter database "gsnrac" open resetlogs...
/u01/admin/gsnrac/udump/gsnrac1_ora_2050.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
ORACLE_HOME = /u01/product/10.2.0/db_1
System name: SunOS
Node name: osagility2
Release: 5.10
Version: Generic_127127-11
Machine: sun4v
Instance name: gsnrac1
Redo thread mounted by this instance: 0 <none>
Oracle process number: 19
Unix process pid: 2050, image: oracle@osagility2 (TNS V1-V3)
gsnrac1_ora_2050.trc:
*** ACTION NAME:(0000001 FINISHED51) 2009-09-01 23:08:11.428
*** MODULE NAME:(sqlplus@osagility2 (TNS V1-V3)) 2009-09-01 23:08:11.428
*** SERVICE NAME:() 2009-09-01 23:08:11.428
*** SESSION ID:(155.1) 2009-09-01 23:08:11.428
Control file created with size 932 blocks
Prior to RESETLOGS processing...
ALTER SYSTEM ARCHIVE LOG ALL USING BACKUP CONTROLFILE start
Database is not in archivelog mode
ALTER SYSTEM ARCHIVE LOG ALL USING BACKUP CONTROLFILE complete
*** 2009-09-01 23:08:15.431
Thread 1: Sequence reset to 1.
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Any idea? thx.

there is also ORA-00313: open failed for members of log group 1 of thread 1, in alert log. But according to metalink (Doc ID:1005110.6), it's not an issue for new created DB...
RESETLOGS after incomplete recovery UNTIL CHANGE 524106
Tue Sep 1 23:08:15 2009
Errors in file /u01/admin/gsnrac/udump/gsnrac1_ora_2050.trc:
ORA-00313: open failed for members of log group 1 of thread 1
Tue Sep 1 23:08:18 2009
Errors in file /u01/admin/gsnrac/udump/gsnrac1_ora_2050.trc:
ORA-00313: open failed for members of log group 2 of thread 1
Tue Sep 1 23:08:22 2009
Setting recovery target incarnation to 2
Tue Sep 1 23:08:22 2009
Assigning activation ID 1583419670 (0x5e611116)
Thread 1 opened at log sequence 1
Current log# 1 seq# 1 mem# 0: +DATA/gsnrac/onlinelog/group_1.268.696467295
Successful open of redo thread 1
Tue Sep 1 23:08:22 2009
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Tue Sep 1 23:08:22 2009
SMON: enabling cache recovery
Tue Sep 1 23:08:23 2009
Errors in file /u01/admin/gsnrac/udump/gsnrac1_ora_2050.trc:
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Tue Sep 1 23:08:23 2009
Error 704 happened during db open, shutting down database
USER: terminating instance due to error 704
Instance terminated by USER, pid = 2050
ORA-1092 signalled during: alter database "gsnrac" open resetlogs...

Similar Messages

DBCA error on Caldera OpenUnix 8

I installed Oracle 9i Enterprise Edition Database on OpenUNIX 8 (SCO UnixWare 7.1.3 + Caldera OpenLinux 3.1.1 RPM). Net Assistant was completed automatically after the installation while the next tool (Database Configuration Assistant) didn't run correctly, so I had to complete the instalation without creating any database. Runing that tool after (bash-2.05$ ./dbca )shows the same error message, as below :
SIGSEGV 11* segmentation violation
stackbase=0x450b8000, stackpointer=0x450b75b0

Pl see this related thread - DBCA error in Oracle_Developer_Days Package
HTH
Srini

DBCA Error 5

Hi,
Having some trouble using DBCA to configure options in a database. Immediately after specifying the database I get the following error:
There is an error in creating the following process: ...\sqlplus -S /NOLOG
The error is:
CreateProcess: ...\sqlplus -S /NOLOG
error=5
Anybody knows what it is?
Thanks
Paulo

Pl see this related thread - DBCA error in Oracle_Developer_Days Package
HTH
Srini

Using dbca to extend RAC cluster error

Hi all,
I'm trying to extend my 11gR2 RAC cluster (POC) using the Oracle documentation (http://vishalgupta.com/oracle/docs/Database11.2/rac.112/e10718/adddelunix.htm). I've already cloned and extended Clusterware and ASM (Grid Infrastructure) to the new node, as well as cloned the RAC database software to the new node. When I run the below statement to have dbca extend add a new instance on the node for the RAC I get the error shown:
CMD:
$ORACLE_HOME/bin/dbca -silent -addInstance -nodeList newnode13 -gdbName racdb -instanceName racdb4 -sysDBAUserName sys
-sysDBAPassword manager123
ERROR:
cat racdb0.log
"Adding instance" operation on the admin managed database racdb requires instance configured on local node. There is no instance configured on the local node "newnode13".
I set ORACLE_HOME before running dbca, and I've also tried setting ORACLE_SID to both racdb4 and racdb, no change. My environment is below, any help is appreciated.
OS: SLES 11.1
Database: 11.2.0.1
Existing Nodes: node01,node02, node03
New Node: newnode13
DB Name: racdb
Instances: racdb1, racdb2, racdb3
New Instance: racdb4
Thanks.

Silly me, I was running the command from the new node instead of an existing node. I guess it was a rough weekend after all. Thanks all!

Install RAC 11g2 : DBCA error with listener

I get this error while create database with DBCA in RAC 11g2 installation.
ORA-00119: invalid specification for system parameter REMOTE_LISTENER
ORA-00132: syntax error or unresolved network name 'rac-scan.edu.vn:1521'
My scan listener :
[oracle@vm01 admin]$ srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521
SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1521
[oracle@vm01 admin]$ srvctl status scan_listener
SCAN Listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node vm02
SCAN Listener LISTENER_SCAN2 is enabled
SCAN listener LISTENER_SCAN2 is running on node vm01
[oracle@vm01 admin]$ srvctl status scan
SCAN VIP scan1 is enabled
SCAN VIP scan1 is running on node vm02
SCAN VIP scan2 is enabled
SCAN VIP scan2 is running on node vm01
[oracle@vm01 admin]$ srvctl config scan
SCAN name: rac-scan.edu.vn, Network: 1/10.10.10.0/255.255.255.0/eth2
SCAN VIP name: scan1, IP: /rac-scan.edu.vn/10.10.10.250
SCAN VIP name: scan2, IP: /rac-scan.edu.vn/10.10.10.251
So thanks
Chuong

I've had a very similar problem with DBCA and creation of an 11.2.0.3 database and this ORA-00119:Invalid specification for system parameter REMOTE_LISTENER ORA-00132: syntax error or unresolved network name 'orapscan:1521'.
The solution to my problem was that on the host (a production host) that I was trying to execute DBCA from if I did a 'tnsping orapscan' it did not resolve.
On our development host a 'tnsping oradscan' (oradscan is the scan equivalent in dev for our production equivalent orapscan) it resolves ok.
ie.
13:22:15[oracle@euxq10 [eu11d] ~]$tnsping oradscan
TNS Ping Utility for Linux: Version 11.2.0.3.0 - Production on 08-APR-2013 13:22:20
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Used parameter files:
/apps/oracle/network/sqlnet.ora
Used EZCONNECT adapter to resolve the alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=))(ADDRESS=(PROTOCOL=TCP)(HOST=10.3.55.34)(POR..... etc.....
In this case, it is resolved from EZCONNECT.
This then led us to look at the sqlnet.ora on both our development and production environments, and this is where we found a difference.
In our development environment in sqlnet.ora, we had -
NAMES.DIRECTORY_PATH= (LDAP, TNSNAMES, EZCONNECT)
But in our production environment in sqlnet.ora we had -
NAMES.DIRECTORY_PATH= (LDAP, TNSNAMES)
Thus when we changed our sqlnet.ora in our production environment to include EZCONNECT - ie.
NAMES.DIRECTORY_PATH= (LDAP, TNSNAMES, EZCONNECT)
Then when we retried the DBCA create, we did not receive this ORA-00119 / ORA-00132 error with parameter REMOTE_LISTENER.
Anyway, this was the solution to my problem. Hope it helps others.
Regards,
Roger

DBCA error adding a new instance to a RAC.

Hi all,
I'm facing the following problem:
I'm running Oracle Clusterware & RAC 11.2.0.2 over Solaris SPARC 64.
I've two servers for a RAC. I recently added one new server.
addNode.sh works fine, and I want to add a new instance with dbca. Everything seems to be fine, but when I want to select my database to add the instance dbca runs into the following error:
"Connection to the database cannot be established because the listener could be down. Please make sure that the service is registered with a listener and the listener is up.
Connection to the database failed. Please sure that service "node01-vip:1521:rac1" is registered with the listener, username system has SYSDBA privilege, password is correct and then try again".
My RAC Database is up and running, I run the following command with cluvfy to check database configuration readiness (what should be accomplish, because is running!)
-bash-3.00$ cluvfy stage -pre dbcfg -n node01,node02,node03 -d /u01/app/oracle/product/11.2.0/db_1
Performing pre-checks for database configuration
Checking node reachability...
Node reachability check passed from node "node03"
Checking user equivalence...
User equivalence check passed for user "oracle"
Checking node connectivity...
Checking hosts config file...
Verification of the hosts config file successful
Check: Node connectivity for interface "bge0"
Node connectivity passed for interface "bge0"
Check: Node connectivity for interface "bge1"
Node connectivity passed for interface "bge1"
Node connectivity check passed
(Log too long, I truncated it)
Checking CRS integrity...
CRS integrity check passed
Checking node application existence...
Checking existence of VIP node application (required)
VIP node application check passed
Checking existence of NETWORK node application (required)
NETWORK node application check passed
Checking existence of GSD node application (optional)
GSD node application is offline on nodes "node03,node02,node01"
Checking existence of ONS node application (optional)
ONS node application check passed
Time zone consistency check passed
Pre-check for database configuration was successful.
And....
bash-3.00$ ps -fu oracle | grep inherit
oracle 21888 1 0 19:48:20 ? 0:00 /u01/oracle/11.2.0/grid/bin/tnslsnr LISTENER_SCAN1 -inherit
oracle 22079 1 0 19:48:51 ? 0:00 /u01/oracle/11.2.0/grid/bin/tnslsnr LISTENER -inherit
oracle 28817 26726 0 20:30:26 pts/1 0:00 grep inherit
-bash-3.00$ srvctl config listener -l LISTENER
Name: LISTENER
Network: 1, Owner: oracle
Home: <CRS home>
End points: TCP:1521
what can I do?
Am I doing something wrong?
Thanks in advance!!

Hi,
I am facing the same problem when adding new instance on new node, even when i try with silent mode. Can you please elobrate more how did you fix the problem ?
[oragmaxt@adpltcod01 ~]$ dbca -silent -addInstance -nodeList adpltcod01,adpltcod02,adpltcod03 -gdbName gmaxt.adweag.local -instanceName gmaxt3 -sysDBAUserName sys -sysDBAPassword f1rewa11
Look at the log file "/oragmaxt/app/oragmaxt/cfgtoollogs/dbca/gmaxt0.log" for further details.
[oragmaxt@adpltcod01 ~]$ vi /oragmaxt/app/oragmaxt/cfgtoollogs/dbca/gmaxt0.log
Connection to the database cannot be established because the listener could be down. Please make sure that the service is registered with a listener and the listener is up.
Connection to the database failed. Please make sure that service "adpltcod01-vip:1521:gmaxt1" is registered with the listener, user name "sys" has SYSDBA privilege, password is correct and then try again.
Regards

DBCA ERROR WHILE CREATING A DATABASE

While creating a RAC database using DBCA, DBCA gave the folling error -
"Virtual IP address is not configured for cluster node "pdb1". Run
"/opt/app/oracle/product/10.2.0/oracle/bin/vipca" as "root" user to configure
it before performing the "create Database opration"
I couldn't find vipca in oracle home.
So, i started vipca from crs home as a root user and i got the following error
while configuring the VIP -
" CRS-0211: Resource 'ora.pdb1.vip' has already been registered"
Thanks,

A bit old but still useful info for Raw Device
http://www.fors.com/orasupp/unix/37914_1.HTM
If you are using 10gR2 consider use ASM instead.

DBCA errors and do not create DB

While I try to create DB using Oracle 9i DBCA, I get error that /etc/oratab file doesn't exist and do not create DB on Unix tru64.
I already have many DBs on the server, I need to create a small test DB.
I see the oratab file exist but is renamed with suffix like oratab_h
now how do I point DBCA to that oratab file. I dont want other db to be disturbed if i run root.sh file.
any suggestions, shall rename the oratab to original name or run root.sh? what the best solution.
This looks like Oracle RAC version of DB Software.
When i open DBCA i get option like:
What type of database would you like to create or administer?
1) Oracle cluster database
2) Oracle Single instance database
I found no diff in both the options to create DB.
Appreciate sugestions.
Thanks

*** Duplicate Post ***
KN ... it is not acceptable to repost the same question. If no one answers it is because they don't know the answer or don't wish to answer (we are all volunteers).
Thank you.

Dbca - error before instance is built

Hello
I am new to this (as you might have guesed) and tried to install RAC 10g (10.2.01) several times but always receive the same errors (in german):
PRKR-1008
Instances [testdb11,testdb12] on node [ill_srac1,ill_srac2] on cluster databse "testdb1", PRKR-1008: Instance testdb12 on node ill_srac2 could not be added to cluster database testdb1. could not be added
after pressing OK
PRKR-1001: Cluster database tetdb1 is not present
then I am back in the last window (16 of 16) of dbca
How did I do it:
Installing according to
http://www.dbasupport.com/oracle/ora10g/RACingAhead0301.shtml (thaks by the way)
trying it with two win2k3 nodes
on VMWare ESX.
What was different
I dont have access to the vmx files so the disk caching is not deactivated (does that matter?)
While installing clusterware there is an error to copy the following files to c:\windows\system32\drivers:
ocfs.sys
orafencedrv.sys
orafenceservice.sys
got around that error by copying it manually from node1 to node2 and pressing retry
it says there should be a log in cfgtoollogs\dbca\testdb1, but nothing there.
Any Ideas, other logs?
Thanks

Hello,
I have the same problem.
My Config (Testsystem):
Oracle 10gR2 (10.2.0.1)
VMWare Workstation 5.5 (Trial)
Windows Server 2003
1 Shared Disk with OCFS
2-Nodes RAC
I believe it doesn't matter if disk-caching is disabled or not (for a Testsystem).
I couldn't disable disk-caching too.
While I installed OCFS2 I faced the problem you described already. Manually I copied the files to Node2 (ocfs.sys, orafencedrv.sys, orafenceservice.sys). Everything ok.
Until I started the DBCA in order to install the database.
My error is ( in german too ;-) ):
Instances [racdb1] on Node [rac1] from Clusterdatabase [racdb]
PRKR-1008: Add Instances [racdb1] on Node [rac1] on Clusterdatabase [racdb] failed
CRS-0211: Resource [ora.racdb.racdb1.inst] is registered already. Adding resource failed.
By searching Metalink I found some hints.
They told, that the resource ora.[MyNode1].vip has not enough privileges.
So I used:
..\crs\bin\crs_getperm ora.MyNode1.vip
Name: ora.MyNode1.vip
owner:nt-autorit-t\system:rwx,prgrp::---,other::r--
Adding more privileges:
..\crs\bin\crs_setperm ora.MyNode1.vip -u user:administrator:rwx
I repeat these steps with ora.MyNode2.vip
Trying the DB-Installation again I received the same error.
Maybe it will help you or give you a clou for the next step.
Would be nice if you can tell me what kind of privileges your resources have. Cause, what I don't understand is that my primarygroup (prgrp) is empty? And there are no settings (rwx).
So, please tell me new ideas.
Thanks.
Best regards
Message was edited by:
a tempel

DBCA errors while installing Oracle 10g on Windows 7

Hi all,
I'm trying to install Oracle 10g database on Windows 7 operating system. Software is installed without any error. But it gets following exceptions while running dbca from $ORACLE_HOME/bin/ directory...
java.lang.NullPointerException
at oracle.sysman.oii.oiix.OiixPathOps.concatPath(OiixPathOps.java:553)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.updateProperties(
OiicStandardInventorySession.java:426)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS
tandardInventorySession.java:254)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS
tandardInventorySession.java:229)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS
tandardInventorySession.java:178)
at oracle.sysman.emcp.util.OUIInventoryUtil.getInstallInventory(OUIInven
toryUtil.java:117)
at oracle.sysman.emcp.util.OUIInventoryUtil.getAllCentralAgentHomeLoc(OU
IInventoryUtil.java:586)
at oracle.sysman.emcp.util.CentralAgentUtil.getCentralAgentHomeAndURL(Ce
ntralAgentUtil.java:296)
at oracle.sysman.emcp.EMConfig.getCentralAgentHomeAndURL(EMConfig.java:6
16)
at oracle.sysman.assistants.util.OsUtilsBase.enumerateAgents(OsUtilsBase
.java:1638)
at oracle.sysman.assistants.dbca.ui.ManagementOptionsPage.initializePage
(ManagementOptionsPage.java:402)
at oracle.sysman.assistants.util.wizard.WizardPageExt.onSetActive(Wizard
PageExt.java:94)
at oracle.sysman.assistants.dbca.ui.ManagementOptionsPage.onSetActive(Ma
nagementOptionsPage.java:482)
at oracle.sysman.assistants.util.wizard.WizardExt.wizardSelectionChanged
(WizardExt.java:166)
at oracle.ewt.wizard.BaseWizard.processWizardEvent(Unknown Source)
at oracle.ewt.wizard.BaseWizard.processEventImpl(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
at oracle.ewt.wizard.BaseWizard.selectPage(Unknown Source)
at oracle.ewt.wizard.BaseWizard.doNext(Unknown Source)
at oracle.sysman.assistants.util.wizard.WizardExt.doNext(WizardExt.java:
237)
at oracle.ewt.wizard.BaseWizard$Action.actionPerformed(Unknown Source)
at oracle.ewt.button.PushButton.processActionEvent(Unknown Source)
at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
at oracle.ewt.button.PushButton.activate(Unknown Source)
at oracle.ewt.lwAWT.AbstractButton.processMouseReleased(Unknown Source)
at oracle.ewt.lwAWT.AbstractButton.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at oracle.ewt.lwAWT.LWComponent.processEventImpl(Unknown Source)
at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
read.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
It might be possible that I'm using wrong installation source for the same. It would be nice if anyone can lemme know which link from http://download.oracle.com to access for Oracle 10g R2 source on Windows 7?
Can anyone pls help me out to solve this query??
Thanks in anticipation.

At which point did it occur to you that Windows 7 was developed and released after any version of Oracle 10g and was both uncertified and untested on this platform? ;)
10g will fall off the cliff into desupport in just two weeks. Toss it out and install 11.2.0.1.

Oracle 9i on Windows 2003 server - DBCA error

1. This is the error message that I get when I am trying to install the 9.2.0.3 software in a new oracle home. There is a 10g database which sits in a different Oracle home. The OUI runs smoothly until it comes to the point where the Database Config Assistant tool starts running and then I get this error and the installer hangs. Could anyone let me know why I might be getting this error.
java.lang.UnsatisfiedLinkError: initializeCluster
     at oracle.ops.mgmt.nativesystem.WindowsSystem.initializeCluster(WindowsSystem.java:390)
     at oracle.ops.mgmt.cluster.GetActiveNodes.initializeCluster(GetActiveNodes.java:260)
     at oracle.ops.mgmt.cluster.GetActiveNodes$ClusterWareThread.<init>(Compiled Code)
     at oracle.ops.mgmt.cluster.GetActiveNodes.<init>(GetActiveNodes.java:139)
     at oracle.ops.mgmt.cluster.GetActiveNodes.create(GetActiveNodes.java:158)
     at
     at oracle.sysman.assistants.dbca.backend.Verifier.isRawFeasible(Compiled Code)
     at oracle.sysman.assistants.dbca.backend.Verifier.processRawConfigFile(Compiled Code)
     at oracle.sysman.assistants.dbca.ui.ProgressOnlyHost.performOperation(ProgressOnlyHost.java:138)
     at oracle.sysman.assistants.dbca.backend.Host.startOperation(Host.java:2171)
     at oracle.sysman.assistants.dbca.Dbca.execute(Dbca.java:99)
     at oracle.sysman.assistants.dbca.Dbca.main(Dbca.java:161)
Agent Config Asst
Parameter "orahome" = C:\Oracle\product\ora92
Parameter "nodeinfo" = NO_VALUE
java.lang.UnsatisfiedLinkError: initializeCluster
     at oracle.ops.mgmt.nativesystem.WindowsSystem.initializeCluster(WindowsSystem.java:390)
     at oracle.ops.mgmt.cluster.GetActiveNodes.initializeCluster(GetActiveNodes.java:260)
     at oracle.ops.mgmt.cluster.GetActiveNodes$ClusterWareThread.<init>(Compiled Code)
     at oracle.ops.mgmt.cluster.GetActiveNodes.<init>(GetActiveNodes.java:139)
     at oracle.ops.mgmt.cluster.GetActiveNodes.create(GetActiveNodes.java:158)
     at oracle.agent.AgentCA.configureOPS(AgentCA.java:74)
     at oracle.agent.AgentCA.main(AgentCA.java:39)
Exception in thread "main"
FYI - I have installed the OUI patch Oracle Universal Installer release 2.2.0.18.0 for Windows and the Oracle9i Database Release 2 (9.2.0.3.0) Patch Set for Windows after I installed the 9.2.0.1 database software.
I then tried to run the DBCA tool from the 'Start > Programs>Oracle 9ihome>' menu to create the new Oracle 9.2.0.3 database but the DBCA assistant would not start up.
2. I have a related question:
Has anybody performed a downgrade of Oracle 10g database to Oracle 9.2.0.3 database using export/import?
Can you perform a full database export of the Oracle 10g database using the 9.2.0.3 export utility and then perform a full database import into Oracle 10g? I have read some documentation that states this is not possible. Can anyone verify or confirm how they did this migration? So is the only option then to perform a table or user level export?
Also, if both the databases reside on the same Windows 2003 server box, how can you ensure that the source database files are not overwritten?
Any help would be appreciated.
Thanks,
Vishal.

It only happens when you have oracle 10g and Oracle 9i on the same machine.
You can run 9i dbca successfully, if you rename the 10g "orasrvm.DLL" found in any 10g BIN directory. Rename it back after you are 9i dbca is complete.
Please complete details for this issue see
http://orafaq.net/maillist/oracle-l/2004/10/08/0335.htm
Thanks
Ravisayal

DBCA error ORA-01034 oracle not available on Windows server 2008 r2 64

Hi All,
I have installed oracle 11.2.0.1 on my system having OS Windows server 2008. Then after that through DBCA i was creating the database during that i got ORA-01034 oracle not available. if any body know how to resolve it please reply me.
Thanks & Regards,
Arya

Did you got the error in between when DBCA executed some percentage of work? PLease check its logfiles to get the exact error.

RAC installation error

Hi!
Can anyone help me with this one?
I have trying to installa RAC 10g R2 in Windows Server 2008 R2. I am encountering the error below:
OUI-35073: Exception occured while starting service in the remote nodes. Could not start the service 'OracleClusterVolumeService' in the remote cluster
nodes. The specified service does not exist as an installed service

Hi,
same as your other posts. Please have a look at the documentation and search for the RAC Starter Kits in support.oracle.com.
I believe you have a general setup problem in your environment.
Please post some more information, than just the error. Otherwise it is hard to help you.
Regards
Sebastian

Oracle 10g DBCA error - not enough space on root?

Im running Oracle 10g on HP-UX 11i.
Oracle software is installed ok. Already created a database succesfully. I have now deleted that database and am creating a new one using dbca.
When I get to the final step I get the following error:
You do not have enough free disk space to create the database. You need at least 785,408KB on /, you only have 753,664KB available please allocate more free disk space.
The above is true but I am not putting any datafiles/ redo logs etc on root they are on a separte logical volume. Why does it need all this space on root? I cant add any more space to root anyway as I cant unmount root and extend it.
Cant find anything about this in the oracle documentation, I can only think my oracle software install has got messed up causing this strange error?
Can anyone help? Thanks.

@ Oracle software is installed ok. Already created a database succesfully. I have now deleted that database and am creating a new one using dbca.
When I get to the final step I get the following error:
You do not have enough free disk space to create the database. You need at least 785,408KB on /, you only have 753,664KB available please allocate more free disk space.
When you create database with DBCA, it gives a few options like General purpose, OLTP, etc.
Did you pick same options both the time?

RAC installation error on VMWARE

Hi all,
I am trying to install Oracle clustreware 10.2.0 with 2 nodes on windows 2003 server in vmware environment. The installation got stucked in the middle and shows a message - Abnormal program termination. An internal error has occured. Please provide the following files to Oracle Support :
"C:\Program Files\Oracle\Inventory\logs\installActions2009-05-31_06-12-24PM.log"
"C:\Program Files\Oracle\Inventory\logs\oraInstall2009-05-31_06-12-24PM.err"
"C:\Program Files\Oracle\Inventory\logs\oraInstall2009-05-31_06-12-24PM.out"
The contents of the oraInstall2009-05-31_06-12-24PM.err is: -
Exception java.lang.NullPointerException occurred..
java.lang.NullPointerException
     at oracle.xml.parser.v2.XMLReader.pushXMLReader(XMLReader.java:206)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:205)
     at oracle.sysman.oii.oiic.OiicConfigInitializeWCCE.addStepsForPostInstallClassTool(OiicConfigInitializeWCCE.java:1470)
     at oracle.sysman.oii.oiic.OiicConfigInitializeWCCE.doOperation(OiicConfigInitializeWCCE.java:521)
     at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
     at oracle.sysman.oii.oiif.oiifw.OiifwActionsPhaseWCDE.doOperation(OiifwActionsPhaseWCDE.java:607)
     at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
     at oracle.sysman.oii.oiic.OiicInstallSession$OiicSelCompsInstall.doOperation(OiicInstallSession.java:3863)
     at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
     at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1278)
     at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
     at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:572)
     at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:962)
     at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:899)
The raw disk configuration is : -
Disk Partition Sharing Nodes (2 in count)
\Device\Harddisk1\Partition1 rac2 rac1
Disk Partition Sharing Nodes (2 in count)
\Device\Harddisk2\Partition1 rac2 rac1
Disk Partition Sharing Nodes (2 in count)
\Device\Harddisk3\Partition1 rac2 rac1
Disk Partition Sharing Nodes (2 in count)
\Device\Harddisk4\Partition1 rac2 rac1
Disk Partition Sharing Nodes (2 in count)
\Device\Harddisk5\Partition1 rac2 rac1
Interface information for node "rac2"
Interface Name IP Address Subnet
Public 192.168.2.102 192.168.2.0
Private 192.168.0.102 192.168.0.0
Interface information for node "rac1"
Interface Name IP Address Subnet
Public 192.168.2.101 192.168.2.0
Private 192.168.0.101 192.168.0.0
Check: Node connectivity of subnet "192.168.2.0"
Source Destination Connected?
rac2:Public rac1:Public yes
Result: Node connectivity check passed for subnet "192.168.2.0" with node(s) rac
2,rac1.
Check: Node connectivity of subnet "192.168.0.0"
Source Destination Connected?
rac2:Private rac1:Private yes
Result: Node connectivity check passed for subnet "192.168.0.0" with node(s) rac
2,rac1.
Suitable interfaces for the private interconnect on subnet "192.168.2.0":
rac2 Public:192.168.2.102
rac1 Public:192.168.2.101
Suitable interfaces for the private interconnect on subnet "192.168.0.0":
rac2 Private:192.168.0.102
rac1 Private:192.168.0.101
Please help me to resolve this problem.

The message says "contact Oracle support." Why didn't you?
Because, I presume, you know that you are trying to create a totally unsupported environment.
Throw away the VMWare, go to Oracle VM on Oracle Enterprise Linux and you will find a much happier experience.
Happier too because RAC on Windows is not a pretty sight when it comes to transparent failover.
But please help me out with some of what you posted
1. Did you run the cluster verify tool? Post the full results
2. Did you create VIPs?
3. Can you ssh unchallenged between the two machines?

10.2.0.4 RAC, DBCA error

Similar Messages

Maybe you are looking for