10.2.0.5 windows 64 bit Client ?

I've been looking all over OTN and Metalink. It seems to exist but I cannot find it anywhere.

Thanks, I found the update but this give the following problem. I'm trying to install a 64 bit client on Windows 7. The 10.2.0.1 client installer does not seem to work. It results in error messages:
"Anormal program interruption. An internal error has occurred. Provide the following files to Oracle support:
"Unknown"
"Unknown"
"Unknown"
as discussed in this thread: http://forums.oracle.com/forums/thread.jspa?threadID=953891
So far so good because this product is not certified for Windows 7.
And now there is a 10.2.0.5 client that is certified but only has an upgrade for a non certified version that won't install?
Edited by: Rene W. on Sep 7, 2010 3:12 AM

Similar Messages

SQL*PLUS 32 Bit Client needed for Windows 64 Bit

Hi,
I have got a 64 Bit Windows OS and an Oracle 11.
With 32 Bit Applications ( Crystal Reports) I can not run SQL NET Thick, SQL NET Thin and JDBC.
Oracle 32 Bit Installation is Missing.
Oracles "Instant Client Downloads for Microsoft Windows (32-bit)" will not do it.
http://www.oracle.com/technetwork/topics/winsoft-085727.html
What else to use ?
Thank You
Martin Sautter

Martin.Sautter wrote:
Hi,
i used:
instantclient-basic-nt-11.2.0.2.0.zip (32BitClient)
instantclient-sqlplus-nt-11.2.0.2.0.zip.
I did not find an "old", "classic" SQL*PLUs client.What does that mean exactly, classic client?
Did you unzip the ic sqlplus .zip (the one listed) in the same dir as ic basic?
After dezipping waht than ?
No installer, nothing ...That's the beauty of Instant Client, just unzip or move a few files, set PATH if needed, and you have client libraries all "installed" and ready.
>
You can give advice ?Generally, required lib files are (n Windows) oci.dll, oraociicusN.dll or oraocieiN.dll (N= e.g. 11). Then for Sql*plus add orasqlplusicN.dll and the .exe from ic-sqlplus package.
C:\Users\Test\Ora-IClite>dir
Volume in drive C is OS
Volume Serial Number is 6E8F-186A
Directory of C:\Users\Test\Ora-IClite
2011-12-16 09:30    <DIR>          .
2011-12-16 09:30    <DIR>          ..
2011-08-31 11:39                38 ldap.ora
2011-07-30 12:21           683 008 oci.dll
2011-07-30 12:21        44 153 856 oraociicus11.dll
2011-07-30 12:21         1 501 696 Orasqlplusic11.dll
2011-07-30 12:21           869 376 sqlplus.exe
C:\Users\Test\Ora-IClite>.\sqlplus user@'localhost/xe'
SQL*Plus: Release 11.2.0.2.0 Production on Fri Dec 16 09:34:13 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter password:Edited by: orafad on Dec 16, 2011 9:35 AM

Mobile client for windows 64 bit

Is there a mobile client that works on windows 64 bit?
just been asked to test out our app on a windows 7 laptop and it fails straight away with UnsatisfiedLinkError: c:\mobileclient\bin\oljdbc40.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform
Cannot see anything in the oracle downloads, but they are in Berkeley mode now rather than the traditional stuff.

Not a proper solution, but i have found a work around for the problem
The windows 7 64 bit machine had java 1.6.0_16 installed as the default (we have a problem with a change to the toDate function tightening things up in 1.6.0_18 causing exceptions in our 3rd party software).
We also had an application that was bundled with its own JRE 1.6.0_06 on the machine and when i switch the application code to point at that JRE everything works fine. Not a java person, but i assume that somewhere between 1.6.0_06 and 1.6.0_16 SUN added true 64 bit support and this requires all libraries to be in line. The older version not knowing anything about 64 bit could cope, but obviously without making best use of the device resources
as we have a work around for the time being, i will probably leave this issue until we start on investigating the migration to berkeley in the new year
Edited by: GaryW on Nov 4, 2010 9:54 AM

Cannot Install 11g 64 bit client on Windows 7 Professional 64 bit OS

I am trying to install Oracle 11g 64 bit client on Windows 7 64 Bit Professional. I'm running setup as administrator and all prerequisites fail with Actual Value not Found Expected value not found. I select ignore and press next and the application just silently shuts down. Log is too big so here is an abbreviated log.
Here is the installation log
Thanks in advance!
Using paramFile: C:\temp\win64_11gR2_client\client\install\oraparam.ini
Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
INFO: Initial values of Setup Properties :
PROPERTY VALUE
COLLECTOR_IGNORE_CONFIGURATION false
COLLECTOR_IGNORE_FAILURES false
COLLECTOR_RESPONSE_FILE
DECLINE_SECURITY_UPDATES false
FROM_LOCATION C:\temp\win64_11gR2_client\client\install\../stage/produc
ts.xml
INSTALL_TYPE InstantClient
MYORACLESUPPORT_PASSWORD Protected value, not to be logged
MYORACLESUPPORT_USERNAME
ORACLE_BASE
ORACLE_HOME
ORACLE_HOSTNAME xxx-xxxxxxx-xxx.xxx.xxxxxxx.xxx
PROXY_HOST
PROXY_PORT
PROXY_PWD Protected value, not to be logged
PROXY_USER
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en"}
oracle_install_LaunchNetCA false
oracle_install_NoMigration true
oracle_install_RACInstall false
oracle_install_WindowsSystemDirectory
oracle_install_client_OraMTSPortNumber 2030
oracle_install_db_ConfigurationType
oracle_install_db_InstallEdition EE
oracle_install_db_InstallType
INFO: Launching Oracle Client Installer
INFO: Started executing the flow in INTERACTIVE mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state init
INFO: Waiting for completion all forked tasks at state init
INFO: All forked task are completed at state init
INFO: Completed background operations
INFO: Executing action at state init
INFO: Completed executing action at state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <init>
INFO: Completed validating view at state <init>
INFO: Validating state <init>
WARNING: Validation disabled for the state init
INFO: Completed validating state <init>
INFO: Verifying route success
INFO: Get view named [InstallTypesUI]
INFO: size estimation for InstantClientinstall is 199.0705451965332
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: View for [InstallTypesUI] is oracle.install.ivw.client.view.InstallTypesGUI@94b318
INFO: Initializing view <InstallTypesUI> at state <clientInstallType>
INFO: InstallTypesPane installType is: InstantClient
INFO: Completed initializing view <InstallTypesUI> at state <clientInstallType>
INFO: Displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Completed displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Loading view <InstallTypesUI> at state <clientInstallType>
INFO: Completed loading view <InstallTypesUI> at state <clientInstallType>
INFO: Localizing view <InstallTypesUI> at state <clientInstallType>
INFO: size estimation for InstantClientinstall is 199.0705451965332
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: Completed localizing view <InstallTypesUI> at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state clientInstallType
INFO: Completed executing action at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Client Install Type set in InstallTypeUI is : Administrator
INFO: Validating view at state <clientInstallType>
INFO: Completed validating view at state <clientInstallType>
INFO: Validating state <clientInstallType>
WARNING: Validation disabled for the state clientInstallType
INFO: Completed validating state <clientInstallType>
INFO: In Transition of InstallTypesAction:
INFO: Verifying route ic_no
INFO: Get view named [ProductLanguageUI]
INFO: View for [ProductLanguageUI] is oracle.install.ivw.common.view.ProductLanguageGUI@74d175ff
INFO: Initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Fetching Available Languages...
INFO: Completed displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Loading view <ProductLanguageUI> at state <productLanguage>
INFO: Completed loading view <ProductLanguageUI> at state <productLanguage>
INFO: Localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state productLanguage
INFO: Waiting for completion all forked tasks at state productLanguage
INFO: All forked task are completed at state productLanguage
INFO: Completed background operations
INFO: Executing action at state productLanguage
INFO: Completed executing action at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: The languages in which the product will be installed are [en]
INFO: Validating view at state <productLanguage>
INFO: Completed validating view at state <productLanguage>
INFO: Validating state <productLanguage>
INFO: Using default Validator configured in the Action class oracle.install.ivw.common.action.ProductLanguageAction
INFO: Completed validating state <productLanguage>
INFO: Verifying route productlanguage_yes
INFO: Get view named [InstallLocationUI]
WARNING: Active Help Content for InstallLocationPane.cbxOracleBases do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxOracleBases.conciseHelpText
WARNING: Active Help Content for InstallLocationPane.cbxSoftwareLoc do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxSoftwareLoc.conciseHelpText
INFO: View for [InstallLocationUI] is oracle.install.ivw.client.view.InstallLocationGUI@3850620f
INFO: Initializing view <InstallLocationUI> at state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Completed initializing view <InstallLocationUI> at state <getOracleHome>
INFO: Displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Completed displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Loading view <InstallLocationUI> at state <getOracleHome>
INFO: Completed loading view <InstallLocationUI> at state <getOracleHome>
INFO: Localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Completed localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOracleHome
INFO: Completed executing action at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <getOracleHome>
INFO: Completed validating view at state <getOracleHome>
INFO: Validating state <getOracleHome>
INFO: custom prereq file name: oracle.client_Administrator.xml
INFO: refDataFile: C:\temp\win64_11gR2_client\client\stage\cvu\oracle.client_Administrator.xml
INFO: isCustomRefDataFilePresent: false
INFO: InstallAreaControl exists: false
INFO: Checking:NEW_HOME
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:ORCA_HOME
INFO: Reading shiphome metadata from C:\temp\win64_11gR2_client\client\install\..\stage\shiphomeproperties.xml
INFO: Loading beanstore from file:/C:/temp/win64_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/C:/temp/win64_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: PATH has :==>C:\Users\xxxxxxxx\AppData\Local\Temp\OraInstall2012-04-17_11-11-24AM\jdk\jre\bin;.;C:\windows\system32;C:\windows;C:\app\xxxxxxxx\Oracle\product\11.2.0\client_win32\bin;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Common Files\Roxio Shared\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\OEM\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\OEM\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\OEM\12.0\DLLShared\;C:\Program Files (x86)\Roxio\OEM\AudioCore\;C:\Program Files\TortoiseSVN\bin;C:\Program Files (x86)\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;c:\Program Files\Microsoft SQL Server\90\DTS\Binn\
INFO: Completed validating state <getOracleHome>
INFO: InstallLocationAction to INVENTORY_NO
INFO: Verifying route INVENTORY_NO
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state prereqExecutionDecider
INFO: Completed executing action at state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prereqExecutionDecider>
INFO: Completed validating view at state <prereqExecutionDecider>
INFO: Validating state <prereqExecutionDecider>
WARNING: Validation disabled for the state prereqExecutionDecider
INFO: Completed validating state <prereqExecutionDecider>
INFO: Verifying route executeprereqs
INFO: Get view named [PrereqUI]
INFO: View for [PrereqUI] is oracle.install.commons.base.interview.common.view.PrereqGUI@64d90254
INFO: Initializing view <PrereqUI> at state <checkPrereqs>
INFO: Completed initializing view <PrereqUI> at state <checkPrereqs>
INFO: Displaying view <PrereqUI> at state <checkPrereqs>
INFO: Completed displaying view <PrereqUI> at state <checkPrereqs>
INFO: Loading view <PrereqUI> at state <checkPrereqs>
INFO: Completed loading view <PrereqUI> at state <checkPrereqs>
INFO: Localizing view <PrereqUI> at state <checkPrereqs>
INFO: Completed localizing view <PrereqUI> at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state checkPrereqs
INFO: custom prereq file name: oracle.client_Administrator.xml
INFO: refDataFile: C:\temp\win64_11gR2_client\client\stage\cvu\oracle.client_Administrator.xml
INFO: isCustomRefDataFilePresent: false
INFO: Completed executing action at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state checkPrereqs
INFO: Waiting for completion all forked tasks at state checkPrereqs
INFO: Creating PrereqChecker Job for leaf task Physical Memory
INFO: Creating CompositePrereqChecker Job for container task Free Space
INFO: Creating PrereqChecker Job for leaf task Free Space: xxx-xxxxxxx-xxx:C:\Users\xxxxxxxx\AppData\Local\Temp
INFO: Creating PrereqChecker Job for leaf task Architecture
INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
INFO: CVU tracingEnabled = false
INFO: Preparation of nodes for running verifications failed. Reason:
- Cause Of Problem Not Available
INFO: *********************************************
INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
INFO: Severity:IGNORABLE
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: *********************************************
INFO: Free Space: xxx-xxxxxxx-xxx:C:\Users\xxxxxxxx\AppData\Local\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
INFO: Severity:IGNORABLE
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: Error Message:PRVF-4001 : Check: Space available on "C:\Users\xxxxxxxx\AppData\Local\Temp"
INFO: Cause: Could not determine mount point for location specified.
INFO: Action: Ensure location specified is available.
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: All forked task are completed at state checkPrereqs
INFO: Completed background operations
INFO: Moved to state <checkPrereqs>
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <checkPrereqs>
INFO: Completed validating view at state <checkPrereqs>
INFO: Validating state <checkPrereqs>
INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
INFO: Completed validating state <checkPrereqs>
INFO: Verifying route success
INFO: Get view named [SummaryUI]

I disagree with your assessment, for two reasons.
One is the severity for RAM is listed as Severity:IGNORABLE.
Secondly I just saw this happen to myself just a moment ago (which is how I found this threat) as well using a silent install on a Windows 2008r2 server I can install to using the setup.exe manually. so disk and memory really isn't an issue.
I suspect something else is going on here. If you read those warnings the Critical they are just the last two about disk space and the PATH variable. Perhaps I am not running as elevated as I thought or the C$ share is not reach able. I am going to keep trying and will report back here when I get my silent install working.
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: Error Message:PRVF-4001 : Check: Space available on "C:\Users\xxxxxxxx\AppData\Local\Temp"
INFO: Cause: Could not determine mount point for location specified.
INFO: Action: Ensure location specified is available.
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO:
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO:

Installation 64-bit client software and ODAC on windows 2008 r2

Welcome,
I new on Oracle. I need to create a linked server from sql 2008 r2.
Where i can find latest (current) 64 bit 11g r2 client and odac ?
Is it
https://updates.oracle.com/ARULink/PatchSearch/process_form?bug=10404530 Oracle 11.2.0.3.0
+ Patch 14828076: ORACLE 11G 11.2.0.3 PATCH 13 BUG FOR WINDOWS (64-BIT AMD64 AND INTEL EM64)
and
ODAC http://www.oracle.com/technetwork/database/windows/downloads/index-090165.html
http://download.oracle.com/otn/other/ole-oo4o/ODAC1120320_x64.zip

Hi;
Please review:
FAQ Installing the Oracle Client and ODAC Components on Windows [ID 1319067.1]
Where to Find The 11gR1 64-bit Oracle Data Access Components (ODAC)? [ID 865708.1] <<check section 2 part
Regard
Helios

Installation of forms 11g release 2 on windows 7 64 bit client

Hi,
I am trying to install forms and reports 11g release 2 on my windows 7 64 bit client.
When I tried to install it, I got a message Weblogic should be installed first.
In the Oracle site there are many versions of Weblogic. Which should I install?
Thanks
Rani

Rani,
Oracle has rebranded the Oracle Developer Suite (ODS) as Fusion Middleware (FMw). Part of the evolution of the suite has been the replacement of the OC4J Container used by ODS to use WebLogic Server. Unfortunately, in order to install the FMw Forms and Reports builders you must also install the WebLogic Server (WLS) on your development workstation. Each version of FMw is dependent on a specific version of the WLS. Here is the basic break down:
WLS 10.3.2 with FMw R1 (11.1.1.2)
WLS 10.3.3 with FMw R1 (11.1.1.3)
WLS 10.3.4 with FMw F1 (11.1.1.4)
WLS 10.3.5 with FMw R2 (11.1.2)
As you can see, you will need to download and install the WLS 10.3.5 before you can install FMw R2. Make sure you do not run the WLS configuration step at the end of the instllation. When you install FMw r2, it will perform the necessary configuration the WLS and Forms and Reports Services.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Installation of Oracle Client 32 bit on Windows 64 bit

Hi ,
I'm trying to install the 32 bit Oracle client (release 11.2.0) on a Windows server with 64 bit (Microsoft Windows Server 2008 R2 Standard, Service Pack 1).
It's my understanding that this is supported and should work. However, the 64 bit Oracle client (release 11.2.0) is already installed on the server.
We need the 32 bit client since an older application requires this.
The GUI for the install of the client starts fine - but when the step "Finish installation" the GUI suddenly disappeares. The logfile of the installation ends
with
INFO: Setting the value for INSTALL_TYPE variable
INFO: Variable "INSTALL_TYPE" wird auf "InstantClient" festgelegt. Der Wert wurde von der Befehlszeile empfangen.
INFO: adding the variable oracle_install_NoMigration to command line args table
INFO: adding the variable oracle_install_RACInstall to command line args table
INFO: adding the variable oracle_install_WindowsSystemDirectory to command line args table
INFO: Update the State machine to STATE_INIT_SESSION
INFO: Creating & Initializing the Session Interface Manager
INFO: Calling OiicInstallAPISession's prepareForInstallOperations
INFO: Do the iterator execution till Summary
INFO: Initialisieren des Installationsbestands
INFO: Einrichten des Installationsbestands
I'm executing the installation as a local admin - I've tried the installation with setting the compatibility mode to Windows 2000. No success at all :-(
Did I get it wrong that ths 32 bit client is certified with this windows version? Does anybody have experience with the same situation?
Any help will be appreciated!
Rgds
Jan

Are you using separate ORACLE_BASE directories ?
Oracle&reg; Database
HTH
Srini

Installing 64 bit client on Windows Server 2008

Hi,
I'm trying to install an 11.2.0.2 64 bit client on my windows 2008 R2 server and its not going through. The install wizard completes, but when I click "install" it starts up the install and just closes in about 3 seconds installing nothing in the install directory.
We currently have a 32 bit 11.2.0.2 client installed on the server as well.
How can I get the 64 bit client to install properly?
I've tried running the setup.exe as admin, running it through cmd with ignore system prereqs, and giving the install folder full permissions to everyone
Edited by: 893188 on Oct 25, 2011 12:41 PM

Pl confirm that you are installing using two separate ORACLE_BASE directories - one for 32-bit and the other for 64-bit.
http://download.oracle.com/docs/cd/E11882_01/relnotes.112/e16777/toc.htm#CJADGJDB
Are there any clues in the install log ? http://download.oracle.com/docs/cd/E11882_01/install.112/e16774/ts.htm
HTH
Srini

Window 7 32 bit client machine dot net exe running in IE8 or IE9 from server security warning file download issue

Help me in the issue, Asp dot net exe which run from server in IE 8 window 7 32 bit client machine show security file save download message. This app was running fine if we don't apply any window 7 or IE8 patches. same issue when running in
IE9. I already run the caspol, add the server link to trusted site with low security. I wonder why it was working fine without any patches.
I just found that client machine win 7 32 bit has dot net 4.5.1 installed when updated all the patches. after uninstall the dot net 4.5.1. the application worked fine. now I wonder what are the settings need to change to run the application with dot net 4.5.1
installed on machine. as Microsoft always has these things in window updates. thanks in advance.

Hi Gparhar,
In case you are posting on .NET setup forum, I suspect it is not the right forum for your issue, we talks about "setup and deployment of .NET Framework.", if you have problem on installing and uninstalling .NET 4.5.1, we can share you some advice.
For your specific case, I recommend you consult ASP.NET forum instead:
http://forums.asp.net/
Regards,
Barry Wang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Insalling 32 & 64 bit clients in Windows 7 64bit OS

Hi,
We are using Windows 7 64bit OS. We have both 32 bit and 64 bit applications accessing our Oracle 10g server.
Some applications are listed bellow.
1) Forms 6i 32 bit
2) 32 bit VB6 application
3) Office VBA applications
4) Autocad 64 bit VBA
5) ASP.NET
I first installed forms6i. I find all my 32bit applications working perfectly.
Then I insalled 64 bit oracle 11g instant client & ODAC & ODBC. I tested the 64bit ODBC connection and it works.
Then when i try to run the 32 bit applications it not working.
I find that in registry my oracle home is pointing to the new 64bit client.
How to make both 32bit and 64bit applications work together.
Regards,
Shijith

Hi,
Thanks Srini for your quick reply.
Meanwhile we succeeded in installing both Oracle 32bit and 64 bit clients. The following clients are installed.
1)     Oracle Forms 6i
2)     Oracle 10g 32 bit client
3)     Oracle 11g instant client, ODAC & odbc for 64bit.
By this we are able to run our
1)     oracle form based applications
2)     VB 6 Complied Applications
3)     ODBC for both 32 & 64 bit.
But we can’t connect from VBA forms from both Office 2010 64 bit and Autocad VBA 2012 64 bit.
I tried ole db for connection string from VBA which gives the error prtovider was not found. Please provide me the steps [references if needed] and connection string for OleDB or any other method.
Actually I don't have much experience with oracle. This is what heppen so far.
Regards,
Shijith

Installing Oracle 11g client 32 bit, on a windows 64 bit platform

Hi all,
I was searching the forum and came and found out that PL/SQL developer is only 32 bit for the time being and can only be used with a 32 bit oracle client. I need to use PL/SQL developer so I want to know that will a 32 bit client work perfectly with the 64 bit windows 7? Or will there be any issues?
Thanks

hi,
Thanks for your support, but these notes are not opening up.
i went to this link https://blogs.oracle.com/db/entry/master_note_for_oracle_database_client_installation_id_11574631
but whenever i open the note i get the error,
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.
Kindly help me if i'm missing something here.
Thanks

Installing 32-bit client on windows 64-bit

Hi friends,
I've installed 64-bit Oracle software and database on Windows 2008 64-bit server. We have created this server to troubleshoot something at 3rd party location and our application will be on the same server as the database. Our application is not compatible with 64-bit client so is it possible to install 32-bit Oracle client on this system with 64-bit oracle database running? Do I have to make any changes to the path for the application to use 32-bit cilent?
THanks a lot

newbiegal wrote:
Hi friends,
I've installed 64-bit Oracle software and database on Windows 2008 64-bit server. We have created this server to troubleshoot something at 3rd party location and our application will be on the same server as the database. Our application is not compatible with 64-bit client so is it possible to install 32-bit Oracle client on this system with 64-bit oracle database running?yes
Do I have to make any changes to the path for the application to use 32-bit cilent?yes

Agentry 6.0.32 client: does it work on Windows 64-bit?

Hi Folks - We use Work Manager 5.3 with Agentry 6.0.32 server and client. We generally use Panasonic Toughbook mobile devices that are 32-bit Windows 7. But recently a couple of 64-bit PCs have been added.
Does anyone know if the 6.0.32 Agentry win32 client works on Windows 64-bit? If so are any additional steps needed to make it work?
We have been using the client install found in this zipfile from SAP SMP: 51046915_1.zip
Best Regards - Jeff

Jeff,
The Agentry 6.0.x clients run just fine on Windows 64-bit. I am running Windows 7 Enterprise 64-bit and have used all the Windows clients (Agentry 6.0.x, SMP 2.3/Agentry 6.1 win32 and WPF and SMP 3.0 Win32 and WPF clients) on my laptop without any issues.
No additional steps are needed to get this to work.
--Bill

Help!! Windows 7 64 bit Client won't install silently fails

Hello all,
I have not been able to find an answer to this and I see posts on forums to no avail. I am trying to install the 64 bit client on my Windows 7 box and it goes through the config checks hits 100% then it just silently dies and closes. Any idea what I need to install or how to figure out what is going on? Not sure the logs will even be there under the oracle home as I don't think it even exists at that point yet. I can install the 32 bit client without issue but that is it and others are saying they had to do the same thing. The other thing is if I click the browse button to change the oracle home path it also just closes the install.
Thanks all.
Edited by: user8189014 on Feb 7, 2012 8:44 AM

Welcome to the forums !
Pl identify exactly what you are installing.
Are you using a supported OS ? http://docs.oracle.com/cd/E11882_01/install.112/e24187/pre_install.htm#CIHIAGFG
Are you following the instructions in the Install Guide ?
HTH
Srini

Easy print not working on a 64 bit Windows 8.1 client with Remote Desktop connection version 8.1

Easy print is not working on a 64 bit Windows 8.1 client with Remote Desktop connection version 8.1 . Printers dont get redirected when you connect to the terminal server. The server we are connecting to has Windows 2008 server. On 32 bit Windows
7 and windows XP clients Easy print is working fine and printers get redirected in terminal server.

I am having the exact same problem. Windows 7 works fine, but 8.1 will not redirect printers. Others said to check local policy terminal services settings and my setting are all set as they should.
I think Windows 8.1 is not telling the terminal server what printers it has.

10.2.0.5 windows 64 bit Client ?

Similar Messages

Maybe you are looking for