10.2.1 Official Update for the BlackBerry z30
Hello, First off...I have a BlackBerry z30 which I had to purchase unlocked to run on the T-Mobile netwrk because I really wanted the z30 and T-Mobile is not carrying the z30 online or in retail stoes. Now I am running the 10.2.1.1055 leak and it runs decent but I know at some time T-Mobile will release the OTA official release of 10.2.1 for the z10, but since they do not carry or support the z30, what would be my options for installing the official 10.2.1 version on my phone. I do want to at some point run the official stable version of 10,2.1 on my phone. Any suggestions would be greatly appreciated.
The manual autoloader method I mentioned a couple posts above...
Upgrading OS10 devices using Autoloader
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Firmware Update for my blackberry 8830 world edition with Bell Canada
Hi does anyone know if there is firmware update for the Blackberry 8830 world edition with the carrier being Bell Canada? I am running version 4.2 and I know there is 4.5 but I am not sure if this applies the my phone with Bell Canada. When I boot up my desktop manager and checks for updates and says that there is no update. I don't want to update if it is not necessary and not be able to run my blackberry. If I am able to update where would I go to get the 4.5 update?
You have to repair Desk Manager or unintall and reintall DM, but this time uncheck "Auto update" and anything that refer to "update" the reason why I mention that is because everythime you run DM, it goes online and check for newer version and put this file "vendor.xml" in the Blackberry Common Folder, and with that file in place, it will block the program from installing the newer version from a difference cell company..
From what I see 4.2 is the only version that is up to date for a 8830...but if you have a 8820, you can update to 4.5. -
Official 2009 Lenovo T61/T61p Nvidia Video Drivers: Please Consider One Last Update for the Road
The title of this new thread says it all ..... 3 years since the last offical Lenovo T61/T61p Nvidia Video Driver Package release ..... a virtual lifetime in computer science years.
I'm looking for advice on how to best lobby the technical folks at Lenovo (by phone or here on the Forums) for one last official Lenovo "Nvidia" video driver update for our T61 and T61p units.
Lenovo's most current "ancient" 2009 Nvidia driver packages (found here),
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS001342
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS003876
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS003605
all leave quite a bit of 3D (and some 2D) performance laying out there on the table based on my own testing with current modern Nvidia reference drivers on a cloned test mule hard drive (and never once crashed with the newer Nvidia reference drivers under WinXP 32-bit or Win7 32 bit).
Most all the major 3D gaming benchmarks were nearly doubled, and most importantly, my real world qualitative performance experience seemed even greater than the nearly doubled quantitative benchmark results.
I'm wondering if starting this new thread would be of any benefit to encourage the good folks at Lenovo to consider one last update after 3+ years?
Before I go to the trouble of posting my results, it is my hope that Lenovo could simply try the latest Nvidia reference drivers for themselves, tweak them (if even necessary) and then issue one last offical T61/T61p Nivida driver package update for the road .... hundreds of thousands, if not millions, of T61/T61p w/Nvidia GPU units are still in reliable daily service.
http://www.geforce.com/drivers
Something to please consider.
Two (I used to have Five) - T61p 15.4" WS T9300 2.5Ghz units, August 08/08 Builds with FX570M Nvidia Graphics; ... One W520 i7-2860QM w/2000M Nvidia Graphics (most recent acquisition and stupidly fast); .... One - T42 4:3 15" Flexview 1.8GHz with ATI Graphics (still perfect for traveling); ... Two - T500 15.4" units both with ATI HD3650 Graphics.Hi eecon
It is considered fortunate that Lenovo provides newer driver for newer OS even after the system was phased out. From what I know, most of the OEM / manufacturers do not provide drivers for newer version of Windows when the product is phased out.
Furthermore, graphic card vendors (e.g. NVIDIA, Intel, AMD, etc.) oftenly release new drivers and it is hard for manufacturers to catch up with them. Usually, the purpose of OEM providing new driver is to resolve existing issues. If you need performance, get newer drivers directly from vendors website.
Have a nice day!
Peter
W520 (4284-A99)
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future
=====================================
Sound Enthusiast and Enhancement (Post comments, share mixes, etc.)
http://forums.lenovo.com/t5/General-Discussion/Dolby-Home-Theater-v4-for-most-Lenovo-Laptops/td-p/6...
http://forums.lenovo.com/t5/IdeaPad-Slate-Tablets/IdeaPad-Tablet-Sound-Enhancement-Thread/td-p/7150 -
10.2.1.2102 Update for the Z30
Verizon has still not pushed the software 10.2.1.2102 Update for the Z30. Is there any new information on to when if at all?
Bobexit0Bobexit0 wrote:
Verizon has still not pushed the software 10.2.1.2102 Update for the Z30. Is there any new information on to when if at all?
And neither has Verizon pushed the Z30 upgrade to 10.2.1.1925... no one here knows when Verizon will do so.
They have not stated when they might.
There are other methods for upgrading to 10.2.1 if you wish to do so manually.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Any official Update for Flex Builder 3 to use Flash Player 10 Api?
Any official Update for Flex Builder 3 to use Flash Player 10
Api?
How can i use flash player's 10 features in flex builder 3?
ThanksI was able to solve my problem by modifying the solution
offered in
this
technote.
The technote identifies a permissions problem with the
components directory of non-Safari browsers. In my case the
permissions problem appears to have been in the main
/Library/Internet Plug-Ins directory. What tipped me off to the
solution was the fact that after manually removing Flash
Player.plugin and flashplayer.xpt from the /Library/Internet
Plug-Ins directory, subsequent attempts to install Flash Player
resulted in the "Creating file: 1008:5, -5000 Access Denied Error"
I remembered seeing in the technote. Before removing these files,
the installer would just fail silently, perhaps because it saw
files it was going to install already living in the right place,
and furthermore had no permissions to alter the directory.
In any case, by making the permissions change recommended in
the technote to the /Library/Internet Plug-Ins directory, I was
able to install the plug-in, which gave me back access to Flash
content in all my browsers.
Hope this is helpful to someone else...
-Erik -
I was sent an update for my Blackberry - something is wrong!!!
Urgent,
I was sent an update for my Blackberry which I downloaded and then tried to upload - it seems to get stuck at 10% - I've taken the battery out and tried again - still at 10% - please help I need my phone.
Many thanksHi and Welcome to the Community!
(Credit JSanders)
There are two methods of recovery for you to try:
One:
Open Blackberry Desktop Software & Connect your device with PC using USB cable, without inserting battery.
You will get three option Retry, Update Or Cancel, then click on update.
Once it is to the stage of the update "initializing handheld", then insert battery.
If this does not work, and you remain stuck on the backing up the Social Feeds database, go to the second method below.
Secondly:
Start your BlackBerry in Safe mode. Article ID: KB17877 How to start a BlackBerry smartphone in Safe Modehttp://www.blackberry.com/btsc/KB17877
Connect to the BlackBerry Desktop Software and allow your handheld to connect. If you are prompted to upgrade, cancel the upgrade for later.
IF you cannot connect or your Desktop Software does not recognize your device while in Safe Mode, please follow the directions here to force the detect: Article ID: KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
Go to Device > delete > SELECT DATA > select to delete both the Social Feeds and Smart Card databases, and follow the remaining prompts to complete it.
Now, you can return and click to upgrade the device through the Desktop Manager, or reboot the BlackBerry in normal mode and continue the over the air upgrade.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Just downloaded aperture 3.4 update for the app store and now it wont open please help!!
just downloaded aperture 3.4 update for the app store and now it wont open please help!!
Just want to echo this complaint.
I have tried re installing Aperture 3 and I've looked for preferences or something to clear, but nothing helps. It continues to crash each time I open it no matter what. -
I got a new mac with lion on it and I transfered all my stuff from the old mac to the new one. When I went to use iwork the programs did not work anylonger (I do own the disc and tried reinstalling but no good). I found the update for Keynote on the apple site and that solved the problem for keynote. Then I saw the update for the whole iwork program and tried to do that as well but it won't let me run it because it says I have a newer version of Keynote already installed. How do I get the update to work or how do I get the same type of update for numbers and pages individually? Thanks!
Try the following user tip with that one:
Empty/corrupt iTunes library after upgrade/crash -
Can not update iTunes because I have iMac with 10.5.8 . How I will sync my iphone 6.0 with an older version of iTunes on my iMac???? There is no update for the software of my iMac and no update for the iTunes.... So how can I sync????
Requirements for iPhone 5:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later
The highest version of iTunes you can install is 10.6.3 which will not sync with the iPhone 5.
Roger Wilmut1 wrote:
It's always a good idea to check the requirements before purchasing.
The person I spoke with at 1-800-MY-APPLE gave me totally different info...she said the iPhone 5 would in fact sync with the older version of iTunes and that I could restore from my previous iPhone 4 backup and also bring in my music that way. Hmmm....
I'm inclined to go by the published specs, but now I have to jump thru a bunch of hoops I wasn't expecting to. -
Thank you! This may sound lame but are these instructions for my blackberry? I'm receiving iCloud emails without problems on my MacBook Pro and I'd rather not mess w/ settings there. Thanks again!
You don't need to start a new thread to continue a conversation, you can just tack onto the original one. The settings I referred you to are for the Blackberry, since that's the device which is not receiving mail: anything which is working can be left alone.
-
my iphone 4 after ios 5.1 update. had error updating.my phones now in recovery mode. usb to itunes when switched on.doesnt recognise. after update done.yes updates itunes.trued different usb ports. etc . for restore .but nothing.says my phones backed up in preferences.on itunes.but can get back up.i recall doing a firware update for the last os 5.0 update..but forgot where the link was .do i have to buy a new phone ?
UPDATE: I attempted to bypass activation using the emergency call 112 to get into the homescreen, but the call failed, in fact, even 911 will not go through and give me a call failed. (before you yell at me for dialing 911, I'm a firemedic )
-
Last night i was downloading the new update for the Iphone4 on my laptop through Itunes. After the download was done, it was starting to install, and then an error came up and didnt get a chance to check it. Now my Iphone is stuck on the screen with the USB pointing to the Itunes Icon and wont do anything else. Any advice on how to get this fixed, or do i need to go to the Apple store and have them look at it.
slawdog31 wrote:
Is the sleep wake button at bottom center of the Iphone or on top?
Top
iPhone User Guide -
I am running Lightroom 6 in conjunction with 64 bit Photoshop CS6. I need to install Camera Raw 9 plus other relevan updates for the Adobe Design and Web Premium CS6 package. Running Adobe Application manager finds the relevant updates but won't download / install them. Clicking the update button results in an error message "Application Manager has stopped working". This is a windows system running 64 bit Windows 7
update manually:
pre cc updates: http://www.adobe.com/downloads/updates/
cc updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
cc 2014 updates: win (http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html) / mac (http://prodesigntools.com/adobe-cc-2014-updates-links-mac.html) -
Adobe Reader for the BlackBerry PlayBook Showstopping Issue: App does not start
Hello;
I would like to report an issue with the Adobe Reader app for the BlackBerry PlayBook which renders the application fully unusable. This issue occurs everytime. This issue has been tested and verified to occur in two distinct BlackBerry PlayBook devices.
Here is a screenshot stating what version (10.0.3.325) of the Adobe Reader app I have installed:
This, I understand, is the latest version for my platform. Unfortunately, the application does not start. Attempting to run it results in a blank screen after showing the BlackBerry logo. The blank screen can be seen in the following screenshot:
It is also strange that the application does not appear in the Application Permissions list, as seen in the following screenshot:
Is there a fix for this showstopping issue? What steps should I take?Same issue here. Playbook support knows about it, and referred to Adobe. The Adobe forum has this comment. Looks like our Playbooks are abandoned as a platform.
"Mar 4, 2012 7:20 PM
As the tablet market continues to evolve, we continue to evaluate how to best support the market and where to focus on our resources. Because of this, Adobe has decided to end its support of the RIM QNX Playbook devices in March 2012. This means the ability to create new applications for submission to the RIM store will no longer be possible in Adobe Viewer Builder as well as the ability to rebuild existing targets for new releases of Digital Publishing Suite. Any existing QNX targets will be removed from the manage view inside Viewer Builder". -
I have updated my iphone 5 with IOS7. Now there is an update 7.0.2 on my cell and the size of update file is showing around 21.0 MB. I tried to update it ITunes but it seems it is downloading the entire IOS. Is there any separate update for the same or I have to download the entire IOS again?
Well when you download the update with iTunes it will always download the whole new version (in your case 7.0.2) even if its just an bug fix. If you already have 7.0 download the update over-the-air.
You already wrote that the update is only 21 MB, so its not the whole firmware package of 7.0.2 you get with iTunes.
Maybe you are looking for
-
How to make totem display subtitles of xvid movie
I am informed that xine-lib and totem are enable to load subtitles of a Xvid movie, but I just can't turn it on, anybody has successed? I usually have two kinds of subtitle, one is srt format, the other is idx and sub format.
-
How can i edit a gift massage without having an apple ID?
how can i edit a gift massage in apple online store without having an apple ID?
-
Hi, I am developing applications using Forms 4.5, Forms 5 and now I am using forms 6.0. I have a log on screen with 2 fields for user id and password. In the When-New-Form-Instanace of my form I use LOGON built in to log on using a valid oracle user.
-
How I can delete a row using a simple query?
SZSLIFE_SPRIDEN_PIDM SZSLIFE_SGBSTDN_TERM_CODE_EFF SZSLIFE_SLRRASG_BLDG_CODE SZSLIFE_SLRRASG_ROOM_NUMBER SZSLIFE_SLRRASG_BEGIN_DATE SZSLIFE_SLRRASG_END_DATE 48547 199890 48547 199990
-
Last night one of our standby databases crashed because our sysadmin was doing some maint with NetApp volumes and for a few seconds all the mounts vanished, following that database crashed with following message in the logs. Errors in file /app/oracl