10.2.8 Client, error code -1712
Suddenly last week after several months of working fine, our 10.2 and 10.4 clients couldn't login. The 10.3 clients login to Network Home Directories just fine. You can use the same network account login on 10.3 client and it responds. A login on 10.2 or 10.4 does not. Apple support has not been successful either.
10.2 stays on the login window for hours. The barber pole keeps going. 10.4's login window goes dull and eventually will time out.
The server is an Xserve with 10.3.9 Server running.
I've run Repair Permissions, Disk Repair and Disk Warrior. I reimaged the client with our stand .dmg. It logged in OK until I updated it via Software Update.
Eventually if you leave the 10.2 client trying to login for hours a Desktop will be displayed and the message,
"The Operation could not be completed. An unexpected error occurred (error code -1712)"
I'm at my wit's end. I don't have enough money to upgrade all the Jaguar to Tiger or Panther. I'm hoping someone here has some insight. Thanks.
10.2 and 10.4 clients Mac OS X (10.2.x)
Check your 10.2.8 machines Directory Access and make sure LdapV2 is not checked and also that Ldap V3 is checked and configured correctly. I found that if I had both Ldapv2 and v3 on my 10.2.8 clients could not log in. 10.3 clients only have the option for Ldap V3, so it is not an issue.
Similar Messages
-
My safari won't open error code 1712
When I click on Safari nothing happens. Then I go to the Safari app and try to open it from Finder and I get error code 1712 Safari has timed out. Please help someone!
Have a look here: http://www.techontour.com/os-servers/2008/06/27/mac-os-system-error-code-1712/
-
TextEdit Error Code - 1712 TextEdit not responding
TextEdit Error Code 1712
TextEdit doesn't respond
Can someone help me Fix TextEdit? In my Administrator account? I can't open old files in TextEdit; I can't save new files; nor copy old files. Nor can I open saved Sticky files; files saved as either as rtf files, nor as txt files.
This started when I opened a new user account for someone. I dragged documents and files from my Administrator account into my Shared file, but I don't think I did anything with them. I dragged documents and files into the other user account drop file. And, in an effort to put back something that I might have dragged out of my Administrator account, I dragged some back into my Admin drop box.
At some point I had to authenticate my actions by typing in my Administrator account password. I may have taken away my Administrator account privileges from TextEdit. Everything else works. And TextEdit works in all my other User accounts. I'm in an account that I set up for myself, so I don't further damage my Administrator account. And I intend to move every working file and Image over here when I fix this problem. I'll only use the Administrator account to Administrate.
Can anyone help me fix my TextEdit? Or reinstall it from my OS X 3.9 Panther Disc? I don't know which disc.
Or, help me retrieve my Administrator privlideges over my Administrator Account? And then tell me how I can use my Administrator password carefully over all my User accounts?
Thanks,
speakinstepsspeakinsteps:
Let's start with you admin account. I suggest you create a new admin account which will be strictly admin and used for little else. You current admin account and all other accounts will be standard or restricted.
Here's how:
Most likely you have already set up your account, and just as likely it's an admin account. What do you do? In Mac OS X, changing this is relatively easy. Let’s assume you have one account on your computer and it's an admin account. Here’s how you change it:
•Go to the Apple Menu > System Preferences> Accounts. Click on Accounts.
•Click the under Login Options to add an account.
•Check the box to let that user "Allow User to administer this computer." You are temporarily creating a second admin account. Be sure you give it a good password and that you remember it! (More about passwords later, but just choose one now, you can change it later.)
•Log out by going to the Apple Menu and select Logout whoever at the very bottom of the list.
•Go back to System Preferences > Accounts, and find your original user.
•Uncheck the box for that account that allows it to administer the computer. You've now changed your regular account into a Standard user account and you've created a new admin account that you'll hardly ever use. That's the point: only use the admin account when you absolutely need to.
The next step will be to try to restore privileges to your files.
Good luck.
cornelius
PismoG4 550, 100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS X (10.4.5) Mac OS X (10.4.5) Beige G3 OS 8.6 -
Game has stopped loading, error code - 1712?
Sims 3 pets has stopped loading error code - 1712?
A Photoshop installation is tied to the machine it was installed on. Moving it to or from a hard drive breaks the licensing.
The answer is easy: Reinstall CS4 from your disc. and apply all updates.
Gene -
Why can't I close my OpenOffice? Getting error code 1712.
I open OpenOffice last night a couple times and had no issues closing it except once. I got the colorful spinning wheel and eventually had to just shutdown. I then downloaded Mavericks (which took like 3-4 hours) and when I went to install it, it told me I had to shut all programs down. It tried and I tried numerous times to shut it down, but I only receive the error code. No files will open and the program won't open or shutdown. How do I fix it? I've got an appointment for the Genious Bar on Saturday because I think I have a ton of issues with this laptop. This Mac is only 4 months old so I'm not impressed with Mac so far.
OS X: How to quit an unresponsive application using Force Quit
-
Lync server 2013 Temporarily Unavailable to MicroSIP client error code 480
Hi!
MicroSIP I would try to join with a client from my physical machine Lync my server what is installed on a virtual machine. The server
ping I know it back and forth, but neither Active Directory from a server, neither Front End does not want to join from a server with the same mistake.
The help greet!
David14:04:56.836 sip_endpoint.c .Module "mod-pjsua-log" registered
14:04:56.837 sip_endpoint.c .Module "mod-tsx-layer" registered
14:04:56.837 sip_endpoint.c .Module "mod-stateful-util" registered
14:04:56.837 sip_endpoint.c .Module "mod-ua" registered
14:04:56.837 sip_endpoint.c .Module "mod-100rel" registered
14:04:56.837 sip_endpoint.c .Module "mod-pjsua" registered
14:04:56.837 sip_endpoint.c .Module "mod-invite" registered
14:04:56.857 wmme_dev.c ..WMME found 4 devices:
14:04:56.857 wmme_dev.c .. dev_id 0: Wave mapper (in=2, out=2)
14:04:56.857 wmme_dev.c .. dev_id 1: Mikrofon (SoundMAX Integrated D (in=2, out=0)
14:04:56.857 wmme_dev.c .. dev_id 2: Hangszórók (SoundMAX Integrated (in=0, out=2)
14:04:56.857 wmme_dev.c .. dev_id 3: SPDIF illesztő (SoundMAX Integr (in=0, out=2)
14:04:56.857 wmme_dev.c ..WMME initialized
14:04:56.857 pjlib ..select() I/O Queue created (02462EFC)
14:04:56.858 silk.c ..Init silk
14:04:56.858 silk.c ..Init silk > DONE
14:04:56.858 silk.c ..silk enum codecs
14:04:56.858 silk.c ..silk add codecs
14:04:56.858 silk.c ..Add codec 24000
14:04:56.858 silk.c ..silk add codecs
14:04:56.858 silk.c ..Add codec 16000
14:04:56.858 silk.c ..silk add codecs
14:04:56.858 silk.c ..Add codec 12000
14:04:56.858 silk.c ..silk add codecs
14:04:56.858 silk.c ..Add codec 8000
14:04:56.858 conference.c ..Creating conference bridge with 254 ports
14:04:56.858 Master/sound ..Using delay buffer with WSOLA.
14:04:56.861 pjsua_vid.c ..Initializing video subsystem..
14:04:56.872 dshow_dev.c ...Windows found no video input devices
14:04:56.872 dshow_dev.c ...DShow has 0 devices:
14:04:56.872 colorbar_dev.c ...Colorbar video src initialized with 1 device(s):
14:04:56.872 colorbar_dev.c ... 0: Colorbar generator
14:04:56.878 sdl_dev.c ...SDL 1.3 initialized
14:04:56.878 sip_endpoint.c .Module "mod-evsub" registered
14:04:56.878 sip_endpoint.c .Module "mod-presence" registered
14:04:56.878 evsub.c .Event pkg "presence" registered by mod-presence
14:04:56.878 sip_endpoint.c .Module "mod-mwi" registered
14:04:56.878 evsub.c .Event pkg "message-summary" registered by mod-mwi
14:04:56.878 sip_endpoint.c .Module "mod-refer" registered
14:04:56.878 evsub.c .Event pkg "refer" registered by mod-refer
14:04:56.878 sip_endpoint.c .Module "mod-pjsua-pres" registered
14:04:56.878 sip_endpoint.c .Module "mod-pjsua-im" registered
14:04:56.878 sip_endpoint.c .Module "mod-pjsua-options" registered
14:04:56.878 pjsua_core.c .1 SIP worker threads created
14:04:56.878 pjsua_core.c .pjsua version 2.2.1 for win32-6.1/i386/msvc-15.0 initialized
14:04:56.878 pjsua_core.c .PJSUA state changed: CREATED --> INIT
14:04:56.878 pjsua_core.c PJSUA state changed: INIT --> STARTING
14:04:56.879 sip_endpoint.c .Module "mod-unsolicited-mwi" registered
14:04:56.879 pjsua_core.c .PJSUA state changed: STARTING --> RUNNING
14:04:56.887 pjsua_core.c SIP UDP socket reachable at 192.168.0.181:5060
14:04:56.887 udp0247A740 SIP UDP transport started, published address is 192.168.0.181:5060
14:04:56.892 tcplis:5060 SIP TCP listener ready for incoming connections at 192.168.0.181:5060
14:04:56.896 tlslis:5061 SIP TLS listener is ready for incoming connections at 192.168.0.181:5061
14:04:56.896 pjsua_acc.c Adding account: id=<sip:192.168.0.181>
14:04:56.897 pjsua_acc.c .Account <sip:192.168.0.181> added with id 0
14:04:56.897 pjsua_acc.c Adding account: id=<sip:[email protected];transport=tcp>
14:04:56.897 pjsua_acc.c .Account <sip:[email protected];transport=tcp> added with id 1
14:04:56.897 pjsua_acc.c .Acc 1: setting registration..
14:04:56.897 pjsua_acc.c ..Contact for acc 1 updated for SIP outbound: <sip:[email protected]:5060;transport=TCP;ob>;reg-id=1;+sip.instance="<urn:uuid:00000000-0000-0000-0000-0000cefdba75>"
14:04:56.897 endpoint ..Request msg REGISTER/cseq=37239 (tdta024D4FE0) created.
14:04:56.897 tsx0247E414 ...Transaction created for Request msg REGISTER/cseq=37240 (tdta024D4FE0)
14:04:56.897 tsx0247E414 ..Sending Request msg REGISTER/cseq=37240 (tdta024D4FE0) in state Null
14:04:56.897 sip_resolve.c ...Target '192.168.0.199:5060' type=TCP resolved to '192.168.0.199:5060' type=TCP (TCP transport)
14:04:56.897 tcpc024AAFA4 ...TCP client transport created
14:04:56.897 tcpc024AAFA4 ...TCP transport 192.168.0.181:56633 is connecting to 192.168.0.199:5060...
14:04:56.897 pjsua_core.c ...TX 650 bytes Request msg REGISTER/cseq=37240 (tdta024D4FE0) to TCP 192.168.0.199:5060:
REGISTER sip:192.168.0.199:5060;transport=tcp SIP/2.0
Via: SIP/2.0/TCP 192.168.0.181:56633;rport;branch=z9hG4bKPjc548376e096a42cf97fa0753c1065ddb;alias
Max-Forwards: 70
From: <sip:[email protected]>;tag=7bddc71e7f9a4bccabc42484f1129a75
To: <sip:[email protected]>
Call-ID: 470206fc3c574ad3bad2e7021469aee6
CSeq: 37240 REGISTER
User-Agent: MicroSIP/3.6.3
Supported: outbound, path
Contact: <sip:[email protected]:5060;transport=TCP;ob>;reg-id=1;+sip.instance="<urn:uuid:00000000-0000-0000-0000-0000cefdba75>"
Expires: 300
Allow: PRACK, INVITE, ACK, BYE, CANCEL, UPDATE, INFO, SUBSCRIBE, NOTIFY, REFER, MESSAGE, OPTIONS
Content-Length: 0
--end msg--
14:04:56.897 tsx0247E414 ...State changed from Null to Calling, event=TX_MSG
14:04:56.897 pjsua_acc.c ..Acc 1: Registration sent
14:04:56.897 pjsua_acc.c Acc 1: setting online status to 1..
14:04:56.899 tcpc024AAFA4 !TCP transport 192.168.0.181:56633 is connected to 192.168.0.199:5060
14:04:56.904 sip_endpoint.c Processing incoming message: Response msg 480/REGISTER/cseq=37240 (rdata024AB168)
14:04:56.904 pjsua_core.c .RX 352 bytes Response msg 480/REGISTER/cseq=37240 (rdata024AB168) from TCP 192.168.0.199:5060:
SIP/2.0 480 Temporarily Unavailable
FROM: <sip:[email protected]>;tag=7bddc71e7f9a4bccabc42484f1129a75
TO: <sip:[email protected]>;tag=4e12daed5c
CSEQ: 37240 REGISTER
CALL-ID: 470206fc3c574ad3bad2e7021469aee6
VIA: SIP/2.0/TCP 192.168.0.181:56633;branch=z9hG4bKPjc548376e096a42cf97fa0753c1065ddb;rport;alias
CONTENT-LENGTH: 0
SERVER: RTCC/5.0.0.0
--end msg--
14:04:56.904 tsx0247E414 .Incoming Response msg 480/REGISTER/cseq=37240 (rdata024AB168) in state Calling
14:04:56.904 tsx0247E414 ..State changed from Calling to Completed, event=RX_MSG
14:04:56.904 pjsua_acc.c ....SIP registration failed, status=480 (Temporarily Unavailable)
14:04:56.904 pjsua_acc.c ....Scheduling re-registration retry for acc 1 in 5 seconds..
14:04:56.904 tsx0247E414 Timeout timer event
14:04:56.904 tsx0247E414 .State changed from Completed to Terminated, event=TIMER
14:04:56.904 tsx0247E414 Timeout timer event
14:04:56.904 tsx0247E414 .State changed from Terminated to Destroyed, event=TIMER
14:04:56.904 tdta024D4FE0 ..Destroying txdata Request msg REGISTER/cseq=37240 (tdta024D4FE0)
14:04:56.904 tsx0247E414 Transaction destroyed!
14:05:02.346 pjsua_acc.c Acc 1: setting registration..
14:05:02.346 pjsua_acc.c .Contact for acc 1 updated for SIP outbound: <sip:[email protected]:5060;transport=TCP;ob>;reg-id=1;+sip.instance="<urn:uuid:00000000-0000-0000-0000-0000cefdba75>"
14:05:02.346 endpoint .Request msg REGISTER/cseq=32834 (tdta024D4FE0) created.
14:05:02.346 tsx0247108C ..Transaction created for Request msg REGISTER/cseq=32835 (tdta024D4FE0)
14:05:02.346 tsx0247108C .Sending Request msg REGISTER/cseq=32835 (tdta024D4FE0) in state Null
14:05:02.346 sip_resolve.c ..Target '192.168.0.199:5060' type=TCP resolved to '192.168.0.199:5060' type=TCP (TCP transport)
14:05:02.347 pjsua_core.c ..TX 650 bytes Request msg REGISTER/cseq=32835 (tdta024D4FE0) to TCP 192.168.0.199:5060:
REGISTER sip:192.168.0.199:5060;transport=tcp SIP/2.0
Via: SIP/2.0/TCP 192.168.0.181:56633;rport;branch=z9hG4bKPj8424f24f501b4db28ae00768d4ba1d60;alias
Max-Forwards: 70
From: <sip:[email protected]>;tag=d5d2f69c60264df0a4df15564feea846
To: <sip:[email protected]>
Call-ID: a0ad089f69ec443ea884ea18452c0fa4
CSeq: 32835 REGISTER
User-Agent: MicroSIP/3.6.3
Supported: outbound, path
Contact: <sip:[email protected]:5060;transport=TCP;ob>;reg-id=1;+sip.instance="<urn:uuid:00000000-0000-0000-0000-0000cefdba75>"
Expires: 300
Allow: PRACK, INVITE, ACK, BYE, CANCEL, UPDATE, INFO, SUBSCRIBE, NOTIFY, REFER, MESSAGE, OPTIONS
Content-Length: 0
--end msg--
14:05:02.347 tsx0247108C ..State changed from Null to Calling, event=TX_MSG
14:05:02.347 pjsua_acc.c .Acc 1: Registration sent
14:05:02.355 sip_endpoint.c Processing incoming message: Response msg 480/REGISTER/cseq=32835 (rdata024AB168)
14:05:02.355 pjsua_core.c .RX 352 bytes Response msg 480/REGISTER/cseq=32835 (rdata024AB168) from TCP 192.168.0.199:5060:
SIP/2.0 480 Temporarily Unavailable
FROM: <sip:[email protected]>;tag=d5d2f69c60264df0a4df15564feea846
TO: <sip:[email protected]>;tag=9399ccca85
CSEQ: 32835 REGISTER
CALL-ID: a0ad089f69ec443ea884ea18452c0fa4
VIA: SIP/2.0/TCP 192.168.0.181:56633;branch=z9hG4bKPj8424f24f501b4db28ae00768d4ba1d60;rport;alias
CONTENT-LENGTH: 0
SERVER: RTCC/5.0.0.0
--end msg--
14:05:02.355 tsx0247108C .Incoming Response msg 480/REGISTER/cseq=32835 (rdata024AB168) in state Calling
14:05:02.355 tsx0247108C ..State changed from Calling to Completed, event=RX_MSG
14:05:02.355 pjsua_acc.c ....SIP registration failed, status=480 (Temporarily Unavailable)
14:05:02.355 pjsua_acc.c ....Scheduling re-registration retry for acc 1 in 305 seconds..
14:05:02.355 tsx0247108C Timeout timer event
14:05:02.355 tsx0247108C .State changed from Completed to Terminated, event=TIMER
14:05:02.355 tsx0247108C Timeout timer event
14:05:02.355 tsx0247108C .State changed from Terminated to Destroyed, event=TIMER
14:05:02.355 tdta024D4FE0 ..Destroying txdata Request msg REGISTER/cseq=32835 (tdta024D4FE0)
14:05:02.355 tsx0247108C Transaction destroyed!
What
is the task at this time? I want to operate it on a local area network, but cannot be attached for something.
Is it possible to find a solution to this? The lyncdiscovery there are records within into DNA!
Lync server him keeping a diary which way I find it, because the snooper I get nowhere.
Ahead thanks:) -
I had been on several sites comparing Gas and Electricity prices. When I came out of Firefox I took the option to save the windows. Now I can't fire it up again.
Might be hardware failure. Take the iPhone to the nearest Apple store
for evaluation. Make a Genius Bar appointment to avoid delay at the store.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/ -
Hi I can not open the system settings error code 1712
plz help me!!!!!
More detail please, are you talking about opening your System Preferenes?
Deleting the System Preference or other .plist file -
Hello,
we are currently migrating from Windows Server 2012 to 2012 R2 and are not able to get the new Direct Access Service up and running. Our goal is to establish DirectAccess connection for a handful of clients using the IPHTTPS-adapter on the default port 443.
Errors:
There is actually no error showing up. It seems the infrastructure tunnel cannot be created but none of the IPv6-transition adapters is connecting (teredo and 6-to-4 are down) and the IPHTTPs adapter gives no informations about a problem:
>Get-DAConnectionStatus
Status : Error
Substatus : CouldNotContactDirectAccessServer
>Get-NetIPHttpsState
LastErrorCode : 0x0
InterfaceStatus : Failed to connect to the IPHTTPS server; waiting to reconnect
Setup:
Our setup is a virtualized Windows Server 2012 R2 Standard running on Hyper-V. It is located behind a NAT having the Port 443 mapped to the server. The only role installed after the basic install is RRAS including DirectAccess and VPN. The assistants completed
successfully (running the configuration for DirectAccess and VPN). Operation Status says everything is green und working (for multiple days in the meanwhile). A previous direct access installation (on a different machine running Windows Server 2012) has
been removed before installing the new server. The new installation is using a different router, so this might also be the cause of a problem.
The client is a Windows 8.1 notebook located outside the company network accessing the internet through another NAT-device. The client has been able to connect to the previous DirectAccess setup but has never been able to establish a connection after the
setup of the new Direct Access server. The device has no outbound constraints concerning the NAT-device and is only running the integrated Windows Firewall.
Diagnosis:
So far I've done some basic DNS and connectivity checks. The DNS-name can be resolved correctly and the router even responds to pings. The port forward is working and HTTPs connections are generally possible (temporarily routed the port to
access the NLS-Website located on the server, which worked fine).
Network monitor shows that both computers are communicating, traffic on the expected Port 443 is incoming on the server and responses from the server reach the client.
Opening the IPHTTPs-url and in an endless page load. Sometime the browser page closes but I've never seen any result. Using telnet on the port shows that the server is accepting connections. I've even build a small test application that does a GET-Request
on the URL returning HTTP-200 and no content.
I'm currently running out of ideas what to do and since no error occurs this is kind of a bit frustrating. Any help appreciated.
Regards
MatthiasHi,
In addition, have you disabled the DA client components on the DA client? If no, please also check
the settings on the Name Resolution Policy Table.
More information:
DirectAccess
Client Location Awareness – NRPT Name Resolution
In addition, error 0x4C9 means the remote computer refused the network connection. It may be due to the invalid
registry or corrupt drivers. For more detailed information, please refer to the link below:
Error 1225 - Error Code 0x4C9
Note:
Microsoft is providing this information as a convenience to you. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best regards,
Susie -
Not able to get the error code when the client ,server running in Diff JVM
Hi ,
My server code is running on websphere App server . My client is running on different JVM on my machine .
When I try to throw my own exception , I am not getting any data in the exception object.
I am setting error code and msg in the exception object.
But when i retrive from my client , it is returning the null.
Can some one throw some info regrading this .Hi,
Did this issue occur on all clients?
Please run ipconfig /all command on this problematic computer, and then post the screenshot here.
In addition, update your network adapter, disable the firewall and anti-virus temporarily and then run these commands:
netsh winsock reset catalog
netsh int ip reset
Meanwhile, please refer to this article to troubleshoot:
DHCP Clients Are Unable to Get IP Addresses from a DHCP Server
http://support.microsoft.com/kb/197197/EN-US
Karen Hu
TechNet Community Support -
XI - Call Adapter Error - HTTP client. Code 402 reason ICM_HTTP_TIMEOUT
I am using HTTP adapter to post XML PO to vendor's site. We are having this problem with one of our vendor when PO's has more than 15 line items. XI server is getting error-"Call Adapter Error - HTTP client. Code 402 reason ICM_HTTP_TIMEOUT". Actually PO is posted good for the first time on vendor's site but XI is getting above error message and it keeps posting it again. Is there anyway to stop it otherthan manually stopping the XI message? Is there anyway to increase the wait time of the XI server to get the message.
Thanks in advance.
Mrudula PatelI'm getting the same issue "500 TIMEOUT error" in runtime work bench-->IE--->Test Message. When i manually trigger the file.
The issue is basically from 01-01-2015 02:00 pm to 02-01-2015 01:am , File is picked from source ftp folder and places in archive but xml messages are not reflecting in SXMB_MONI.
Today suddenly after 01:00 am messages are successfully processing.
Please help on this issue. Many Thanks. -
Client not updating - Error Code # 0x80244023 and 0x801901f8
Hello All,
We have a Windows server (2008) which is not pulling updates from WSUS server. It has two NICs - one is public and another is configured with
172.x.x.x range for Admin use (this is for WSUS communication with no DNS setup).
See logs below,
2014-05-07 13:05:50:089 916 1410 Misc
=========== Logging initialized (build: 7.6.7600.256, tz: +0800) ===========
2014-05-07 13:05:50:089 916 1410 Misc
= Process: C:\Windows\system32\svchost.exe
2014-05-07 13:05:50:089 916 1410 Misc
= Module: c:\windows\system32\wuaueng.dll
2014-05-07 13:05:50:089 916 1410 Service *************
2014-05-07 13:05:50:089 916 1410 Service ** START
** Service: Service startup
2014-05-07 13:05:50:089 916 1410 Service *********
2014-05-07 13:05:50:091 916 1410 Agent
* WU client version 7.6.7600.256
2014-05-07 13:05:50:092 916 1410 Agent
* Base directory: C:\Windows\SoftwareDistribution
2014-05-07 13:05:50:092 916 1410 Agent
* Access type: Named proxy
2014-05-07 13:05:50:092 916 1410 Agent
* Default proxy: proxy:8083
2014-05-07 13:05:50:093 916 1410 Agent
* Network state: Connected
2014-05-07 13:05:50:520 916 1410 DtaStor Default service
for AU is {00000000-0000-0000-0000-000000000000}
2014-05-07 13:05:50:531 916 1410 DtaStor Default service
for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-05-07 13:05:50:539 916 1410 Agent
WARNING: Failed to read the service id for re-registration 0x80070002
2014-05-07 13:05:50:539 916 1410 Agent
WARNING: Missing service entry in the backup data store; cleaning up
2014-05-07 13:06:01:251 916 1594 Report
CWERReporter::Init succeeded
2014-05-07 13:06:01:251 916 1594 Agent
*********** Agent: Initializing Windows Update Agent ***********
2014-05-07 13:06:01:253 916 1594 Agent
*********** Agent: Initializing global settings cache ***********
2014-05-07 13:06:01:253 916 1594 Agent
* WSUS server: http://172.16.74.28
2014-05-07 13:06:01:253 916 1594 Agent
* WSUS status server: http://172.16.74.28
2014-05-07 13:06:01:253 916 1594 Agent
* Target group: (Unassigned Computers)
2014-05-07 13:06:01:253 916 1594 Agent
* Windows Update access disabled: No
2014-05-07 13:06:01:253 916 1410 Report
*********** Report: Initializing static reporting data ***********
2014-05-07 13:06:01:253 916 1410 Report
* OS Version = 6.1.7601.1.0.196626
2014-05-07 13:06:01:253 916 1594 DnldMgr
Download manager restoring 0 downloads
2014-05-07 13:06:01:253 916 1410 Report
* OS Product Type = 0x0000000A
2014-05-07 13:06:01:260 916 1594 AU
########### AU: Initializing Automatic Updates ###########
2014-05-07 13:06:01:261 916 1594 AU
# WSUS server: http://172.16.74.28
2014-05-07 13:06:01:261 916 1594 AU
# Detection frequency: 1
2014-05-07 13:06:01:261 916 1594 AU
# Approval type: Pre-install notify (Policy)
2014-05-07 13:06:01:261 916 1594 AU
# Auto-install minor updates: Yes (Policy)
2014-05-07 13:06:01:261 916 1594 AU
# Will interact with non-admins (Non-admins are elevated (Policy))
2014-05-07 13:06:01:384 916 1410 Report
* Computer Brand = VMware, Inc.
2014-05-07 13:06:01:384 916 1410 Report
* Computer Model = VMware Virtual Platform
2014-05-07 13:06:01:390 916 1410 Report
* Bios Revision = 6.00
2014-05-07 13:06:01:390 916 1410 Report
* Bios Name = PhoenixBIOS 4.0 Release 6.0
2014-05-07 13:06:01:390 916 1410 Report
* Bios Release Date = 2012-07-09T00:00:00
2014-05-07 13:06:01:390 916 1410 Report
* Locale ID = 1033
2014-05-07 13:06:01:392 916 1594 AU
Successfully wrote event for AU health state:0
2014-05-07 13:06:01:392 916 1594 AU
Initializing featured updates
2014-05-07 13:06:01:392 916 1594 AU
Found 0 cached featured updates
2014-05-07 13:06:01:392 916 1594 AU
Successfully wrote event for AU health state:0
2014-05-07 13:06:01:395 916 1714 Report
WARNING: Failed to open event cache file at C:\Windows\SoftwareDistribution\EventCache\{1EDE8AC5-7759-45EC-9747-C62989CBAEF4}.bin for reading with hr = 80070002.
2014-05-07 13:06:01:396 916 1714 Report
WARNING: Failed to open event cache file at C:\Windows\SoftwareDistribution\EventCache\{EEE2278A-AE78-4886-96CF-5C5946BA8699}.bin for reading with hr = 80070002.
2014-05-07 13:06:01:396 916 1594 AU
Successfully wrote event for AU health state:0
2014-05-07 13:06:01:396 916 1594 AU
AU finished delayed initialization
2014-05-07 13:06:01:397 916 1594 AU
Triggering AU detection through DetectNow API
2014-05-07 13:06:01:397 916 1594 AU
Triggering Online detection (non-interactive)
2014-05-07 13:06:01:397 916 1410 AU
2014-05-07 13:06:01:397 916 1410 AU
## START ## AU: Search for updates
2014-05-07 13:06:01:397 916 1410 AU
2014-05-07 13:06:01:399 916 1410 AU
<<## SUBMITTED ## AU: Search for updates [CallId = {177B400D-42A5-46EB-8588-A6F107FF3C77}]
2014-05-07 13:06:01:399 916 1714 Agent
2014-05-07 13:06:01:399 916 1714 Agent
** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-05-07 13:06:01:399 916 1714 Agent
2014-05-07 13:06:01:399 916 1714 Agent
* Online = Yes; Ignore download priority = No
2014-05-07 13:06:01:399 916 1714 Agent
* Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation'
and RebootRequired=1"
2014-05-07 13:06:01:399 916 1714 Agent
* ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-05-07 13:06:01:399 916 1714 Agent
* Search Scope = {Machine}
2014-05-07 13:06:01:399 916 1714 Setup
Checking for agent SelfUpdate
2014-05-07 13:06:01:400 916 1714 Setup
Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-05-07 13:07:03:952 916 1714 Misc
WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x801901f8
2014-05-07 13:07:03:952 916 1714 Misc
WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x801901f8
2014-05-07 13:07:22:828 916 1714 Misc
WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x801901f8
2014-05-07 13:07:22:828 916 1714 Misc
WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x801901f8
2014-05-07 13:09:02:845 916 1714 Misc
WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x801901f8
2014-05-07 13:09:02:845 916 1714 Misc
WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x801901f8
2014-05-07 13:10:02:451 916 1714 Misc
WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x801901f8
2014-05-07 13:10:02:451 916 1714 Misc
WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x801901f8
2014-05-07 13:10:02:451 916 1714 Misc
WARNING: DownloadFileInternal failed for http://172.16.74.28/selfupdate/wuident.cab: error 0x801901f8
2014-05-07 13:10:02:452 916 1714 Setup
WARNING: SelfUpdate check failed to download package information, error = 0x80244023
2014-05-07 13:10:02:452 916 1714 Setup
FATAL: SelfUpdate check failed, err = 0x80244023
2014-05-07 13:10:02:452 916 1714 Agent
* WARNING: Skipping scan, self-update check returned 0x80244023
2014-05-07 13:10:02:452 916 1714 Agent
* WARNING: Exit code = 0x80244023
2014-05-07 13:10:02:452 916 1714 Agent
2014-05-07 13:10:02:452 916 1714 Agent
** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-05-07 13:10:02:452 916 1714 Agent
2014-05-07 13:10:02:452 916 1714 Agent
WARNING: WU client failed Searching for update with error 0x80244023
2014-05-07 13:10:02:453 916 ae8 AU
>>## RESUMED ## AU: Search for updates [CallId = {177B400D-42A5-46EB-8588-A6F107FF3C77}]
2014-05-07 13:10:02:453 916 ae8 AU
# WARNING: Search callback failed, result = 0x80244023
2014-05-07 13:10:02:453 916 ae8 AU
# WARNING: Failed to find updates with error code 80244023
2014-05-07 13:10:02:453 916 ae8 AU
2014-05-07 13:10:02:454 916 ae8 AU
## END ## AU: Search for updates [CallId = {177B400D-42A5-46EB-8588-A6F107FF3C77}]
2014-05-07 13:10:02:454 916 ae8 AU
2014-05-07 13:10:02:457 916 ae8 AU
Successfully wrote event for AU health state:0
2014-05-07 13:10:02:457 916 ae8 AU
AU setting next detection timeout to 2014-05-07 06:08:08
2014-05-07 13:10:02:457 916 ae8 AU
Successfully wrote event for AU health state:0
2014-05-07 13:10:02:458 916 ae8 AU
Successfully wrote event for AU health state:0
2014-05-07 13:10:02:463 916 1714 Report
CWERReporter finishing event handling. (00000000)
2014-05-07 13:10:07:452 916 1714 Report
REPORT EVENT: {E1B169E2-C0FC-4D33-A70B-41F76CB362B9} 2014-05-07 13:10:02:452+0800 1 148 101
{D67661EB-2423-451D-BF5D-13199E37DF28} 1 80244023 SelfUpdate
Failure Software Synchronization Windows Update Client failed to detect with error 0x80244023.
2014-05-07 13:10:07:462 916 1714 Report
CWERReporter::HandleEvents - WER report upload completed with status 0x8
2014-05-07 13:10:07:463 916 1714 Report
WER Report sent: 7.6.7600.256 0x80244023 D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 Managed
2014-05-07 13:10:07:463 916 1714 Report
CWERReporter finishing event handling. (00000000)
I verified through Nslookup and found WSUS server IP and name does not resolved. However, the download manager window is opening up while accessing
- http://172.16.74.28/selfupdate/wuident.cab from server browser.
Please help.2014-05-07 13:06:01:395 916 1714 Report WARNING: Failed to open event cache file at C:\Windows\SoftwareDistribution\EventCache\{1EDE8AC5-7759-45EC-9747-C62989CBAEF4}.bin
for reading with hr = 80070002.
This type of error is quite often symptomatic of a corrupted WUA datastore.
2014-05-07 13:07:03:952 916 1714 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with
0x801901f8
The 0x801901F8 is an HTTP 504 -- "request timed out waiting on a gateway".
2014-05-07 13:06:01:253 916 1594 Agent * Target group: (Unassigned Computers)
2014-05-07 13:06:01:261 916 1594 AU # Detection frequency: 1
When using Server-Side Targeting, this value should be at least 2 hours. Based on the above three observations, I recommend the following response:
Verify that the routing table is correct and that requests for 172.16/16 are actually leaving on the correct NIC.
Change the Detection Frequency to at least 2 hours (until you fix the communication issue it might as well be 22 hours!).
Run wuauclt /resetauthorization /detectnow.
If the 0x80070002 error persists, do the following:
Stop the Windows Update service.
Rename %windir%\SoftwareDistribution to SoftwareDistribution.OLD.
Start the Windows Update service.
Run wuauclt /resetauthorization /detectnow and observe the results. If the issue is resolved, copy the ReportingEvents.log from SoftwareDistribution.OLD back to the new SoftwareDistribution.
If the issue is not resolved, post that detection event for further analysis.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
ABAP Client Proxy error code: 401, error text: Unauthorized
Hi,
I have Client proxy in ECC for oubound interface in PI 7.0, when i look into SXMB_MONI of ECC i can see my message with Error "HTTP response contains status code 401 with the description Unauthorized Authorization error while sending by HTTP (error code: 401, error text: Unauthorized)".
As per few thread i already assign SAP_XI_APPL_SERV_USER role to PIAPPLUSER in ECC, still i am getting same eror.
I do not understand how this Proxy communication work, which ECC user will be use in communication and how this communcation link to RFC destination "SAP_PROXY_ESR" type G. Even i can not see type H in ECC so i created RFC destination of type G.
With Regards
SunilWe were able to get it working by making a change in the Integration Engine Configuration (in sxmb_adm).
Changed "Corresponding Integ. Server" from "http://<server>:<port>/sap/xi/engine?type=entry"
to "dest://RFCdestinationName" -
ISE 1.1.1 - Error Code 12521 EAP-TLS failed SSL/TLS handshake after a client alert
Hello,
Has anyone come across this error code before? I have looked in the 1.1.1 troubleshooting section and there is nothing there. When I click on the link for the description off the error in ISE I get the following error:
I setup 7925 phones for EAP-TLS using MIC. I have uploaded Cisco's Root CA and Manufactoring CA Certificates and enabled "Trust for client authentication". A Certificate Profile is configured matching Common Name and is added to the Identity Sequence. I got some additional attribute information, where there is a error message:
OpenSSLErrorMessage=SSL alert code=0x233=563 ; source=remote ; type=fatal ; message="decrypt error"
Anyone know what this error means?Yes,
That could be it see if you can follow this guide on importing the ISE self signed cert: (i used a 7921 guide but it should be similar).
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/7_0/english/administration/guide/7921cfgu.html#wp1376129
Installing the Authentication Server Root Certificate
The Authentication Server Root Certificate must be installed on the Cisco Unified Wireless IP Phone 7921G.
To install the certificate, follow these steps:
Step 1 Export the Authentication Server Root Certificate from the ACS. See Exporting Certificates from the ACS.
Step 2 Go to the phone web page and choose Certificates.
Step 3 Click Import next to the Authentication Server Root certificate.
Step 4 Restart the phone.
Thanks,
Tarik Admani
*Please rate helpful posts* -
DirectAccess Windows 8 Client Won't Connect - Last Error Code: 0x2af9
Hi All
Well I've had 2012 DirectAccess up and running now for about 2/3 weeks (using Win8 client only), it's been "ok" (most problems are client based - like Services not restarting upon resuming from sleep).
Yesterday I spent many hours connected to DirectAccess from my Windows 8 Laptop. When it's working, I love it.
Today, it's a completely different story.
Windows 8 won't damn well connect. At first I started getting prompted to enter proxy credentials (I have no idea why, have never been prompted for this before and the internal TMG proxy shouldn't even be in the loop, given my DA server has it's own
public IP address). The DA server has a completely separate public IP to the proxy's public IP address and the DA is setup with 2x NICs.
The error I'm getting is:
Interface IPHTTPSInterface (Group Policy) Parameters
Role : client
URL :
https://da.fqdn:443/IPHTTPS
Last Error Code : 0x2af9
Interface Status : failed to connect to the IPHTTPS server. Waiting to reconnect
Where do I find out what 0x2af9 error code means?Hi,
The information for your errorcode seems to be related to not beeing able to lookup the host (the information from MSDN is pasted below.)
Can you verify that your client can resolve "da.fqdn" to the correct IPv4 address?
http://msdn.microsoft.com/en-us/library/windows/desktop/ms681391.aspx
WSAHOST_NOT_FOUND
11001 (0x2AF9)
No such host is known.
Jonas Blom | Relevo AB |
http://blog.nrpt.se
Hi Jonas
Thanks for your input. I think you might be right.
I suspected IE wasn't resetting my connection settings (even though I had un-ticked 'use a proxy server' - I don't think it had 'applied').
So, I did a reset of IE10, noticed all of the connection settings were gone and DA connected.
There definitely seems to be a gap in the DirectAccess solution in that it refers to the IE proxy/connection settings rather than just goes out to the Internet like Outlook does. When on the Domain, obviously you'll receive GPOs which in most organisations
that use things like Proxies (e.g. TMG) these GPOs will apply the proxy settings, but then when you disconnect from the Domain and you want to roam, those proxy settings need to be disabled - at least until DA has connected, then you're free to apply
the proxy as the gateway again.
It's a bit annoying.
Maybe you are looking for
-
Last week for a short time Firefox was requiring me to enable third party cookies when visiting sites that previously didn't require 3rd party cookies. I contacted the sites and they never required 3rd party cookies to be enabled. I did detect and de
-
Hello, I have a mac laptop. I have updated my iTunes when asked. Everytime I start iTunes it askes to download 11.0.4 I have done this a few times now, but it hasn't updated like it always used to. Thanks -
-
Impact of force_logging on standby database in 10g?
Hi there, We have a 10.2.0.5 database from which we want to setup a standby database... We took a hot backup of the primary and send it to the standby server but at that time we realized that force logging is not enabled at the Primary before we took
-
Hi We are running R/3 4.6C and XI 3.0. We have a requirement to call a web service from XI at regular intervals (eg 10 mins). From what I have read it is not possible to set the SOAP adapter to poll a web service in this way (as you can with the file
-
Why does my iphone 4 go in and out of charging when plugged in?
I have an iphone 4 with the recent ios8 update installed but for some reason recently it does not charge right away when plugged in, and when it finally does charge it can blink on the screen in and out of charging like the cable is not supported. I