10.2.8/Shuffle/USB 1.1 Issues

-450 Sage iMac
-USB 1.1
-OS X 10.2.8
-iTunes 6.0
Just purchased a 1G Shuffle for my daughter's Xmas gift. The manual stated that my Sage 450 or iTunes 6.0 will not recognize the iPod through the USB 1.1 port. It stated I need to have at least 10.3.6 for it to recognize the unit. (Kind of backwards in my mind.) I tried searching the Apple site for Panther to no avail. Updates are available, but the actual OS X 3.0 does not seem to be available. I've seen it available on a few other sites, but I'm hesitant to buy just anything without knowing who's reputable.
Is there an easy place to buy a Panther download, or is there a reputable site to purchase this product through? Amazon has it for $75.
Is there any other way to make this work by Christmas without a full-blown OS upgrade?
(Or, should I just trash the old Sage and fork out the 1500.00 for a Shuffle ready machine?)
Thanks ahead

Thanks for the input. Spot on regarding the cable. Ran to Radio Shack Xmas Eve (or Friday?) and picked up a 6 ft USB cable (shortest they had.) Plugged the unit in and it was recognized by iTunes. Downloaded a selection of files and my daughter was able to open and use it Xmas morning. Thank you. Can't tell you how relieved I was.
Question: The manual stated that the unit would not work with 10.2.8, yet with the extension cord, all seems to be fine. I haven't needed to recharge it, yet. Could this statement be refering to the inability of the computer to charge the iPod without Panther? Seems odd to me.
Thanks again. Really appreciate the info.

Similar Messages

Still no fix for USB card sleep Issue

Hi I just bought a 3rd party USB 2.0 card (an IOGEAR GIC251U). When I plug my LaCie extrenal USB drive in it works fine, until the computer has been to sleep. When the computer wakes up the drive has disappeared and I get a message saying that the drive has been improperly disconnected and that I can damage it by not ejecting before disconnecting.
Looking at the posts on this forum, it seems that this PCI USB card sleep issue is a persistant problem. I have even heard buying a card described as a "crap shoot".
That is not an acceptable answer to me. I insist that Apple reccomend a USB 2.0 card that it is willing to garuntee will work with my mac (an AGP G4 blue and white tower). If not, how can Apple in good faith sell computers with PCI that isnt equipped to handle built in apple features such as the sleep mode? I don't mean to sound like a demanding jerk of a customer but I dont think it is too much to ask that my computers advertised features (PCI expandability and sleep mode) both be able to work together.
G4/400 MHz AGP graphics Mac OS X (10.4.6)

Hi
xlr8yourmac.com has a wealth of info on compatable devices of all kinds, it's often worth looking there & other Mac sites before purchasing..
Apple cannot possibly determine compatability of all available 3rd party devices, it is up to the vendor to determine what systems/OS versions their hardware will support.
I would stick with a vendor that is known for Mac support, such as Sonnet (or others that are sold through Mac sites such as OWC, SmallDog,etc.,) unless you are willing to do significant research on a specific product for compatability with your specific setup prior to purchasing.

Another windows 8.1 usb 3.0 issue

Hi all,
my usb 3.0 port worked fine in windows 8,, then updated to 8.1 and 8.1 update 1.
Then I had to run a system restore (to a point in time 24 hours before), and then... boom:
No device is detected anymore on the usb 3.0 port of my laptop.
No usb key, no disk... the usb 3.0 disk light turns on and it's blue (3.0) but the device is ignored by windows: no error
in device manager, just nothing.
The only thing I noted, is that when I insert anything in that port, the system interrupts entry of the task manager spikes
to 17% and stays there forever, until I reboot.
I've tried everything I could find on the web for 2 days, I'm probably giving up and will disable the "Intel (R) USB
3.0 eXtensible Host Controller -0100 (Microsoft)” entry in device manager.
I can't believe it's a hardware issue... but it behaves as if it was. My UEFI is very simple and there are no settings for
usb, and the issue persists in safe mode too.
Any idea?
Thanks

Hi,
Please check Device Manager if there was any error message with USB 3.0 driver. If so, what's the error code of it.
You can refer to the link below to fix USB 3.0 driver probelm for test:
Install USB 3.0 and other USB devices:
http://windows.microsoft.com/en-us/windows-8/install-usb-3-usb-devices
Roger Lu
TechNet Community Support

Are USB audio interface issues on iMac Haswell resolved?

HI,
i just ordered a 27 inch iMac, maxed out with a 1TB SSD.
I noticed the imac doesn't have an audio in jack and figured i'd shop for a good USB Audio Interface.
But then i came across all these USB audio interface issues on the new iMac.
This is incredible to me because iMacs are often used by creative people and lots of musicians.
For me audio is VERY important. I record music and i record sound for animation and video.
Apple thus far seemed to be avoiding the topics and issues at hand.
Are the USB audio issues resolved? What was resolved? What was the problem (Maverick? Fusion Drive)?
Is it wise to choose for a Thunderbolt Interface? Which one?
Any help would be hugely appreciated.
Especcialy since it seems such a wide spread problem.
Thanx

doubt it would be a general issue
usb is a universal serial bus it always require a driver for anything
and the driver of one external audio device would act different then the driver from another external audio device
so it would be very unlikely that an external audio card using a cirrus logic audio chip would cause the same issues with the imac as one with a realtek or soundblaster audio chip
not that there could not be issues with all of them but not likely that they would suffer from the same issue

IPod shuffle usb broke does usb cable exist for suffle or components shop?

I broked my Shuffle usb where can i borow that pice that was in the usb head back I cant repair it the usb falled from the ipod. At the gsm doctors thei told me I need that peace for repairing dose anibody know a cite where i can borow it? or dose an usb cable exist for suffle?

iPod Shuffle 1st generation (grey buttons equipped
with latest software) USB Does Not Work:
-When charging with the Adapter, iPod does not
charge. No light comes on.
-When charging with Computer, iPod does not charge.
No light comes on. iPod used to charge to the
computer. Computer has the System Requirements for
the iPod.
-When iPod is put in the Computer, no light comes on,
the iPod is not recognized. iPod used to work with
the computer. Computer has the System Requirements
for the iPod.
-The USB in the iPod looks perfectly fine. Identical
to a different iPod Shuffle 1st generation.
-iPod never broke or had damage problems. The USB
just stopped working.
-The Battery of the iPod still works and the iPod
still lets me play music, but since I cannot charge
it, the battery will eventually not work.
-iPod was purchased in November, 2005. (last year).
What is wrong with my iPod? Thankyou for your time.
It's defective... return it for a replacement at the point of original purchase, an Apple Store, or ask for replacement on line http://www.apple.com/support/contact/

Latest BIOS and USB 3.0 Issues... Still?

95% of the time that I use my T440p, I boot from a Windows To Go USB 3.0 stick that is Windows 8.1 based. My native hard drive is the default Win 8 from Lenovo. After updating to the latest BIOS (i.e., 2.19), which I believe is supposed to address the USB 3.0 issue, I still am getting the prompt/message to "Keep the USB drive plugged in" and to only remove it after the PC has shut down, etc. When this message is shown, I have never observed a loss of functionality.
Thoughts?
I'm on the High Performance power option, and have the USB selective suspend setting disabled, and also changed the USB 3.0 setting in the BIOS to Enabled instead of Auto after the BIOS update. Should I go back to Auto?

Anybody have similar issues? I guess there's few people using a Windows To Go stick?
In any event, this is still a significant issue for me despite upgrading the firmware on the 128GB Kingston DataTraverler Workspace running Win 8.1 as well as trying the following registry edit/hack (http://blogs.msdn.com/b/usbcoreblog/archive/2013/11/01/help-after-installing-windows-8-1-my-usb-driv...

TS3581 CAN YOU CONNECT A SHUFFLE (gen4) TO A KENWOOD CAR STEREO USING THE SHUFFLE USB CABLE ?

HELLO TO ALL
ABIGMAC1 HERE! GOOD DAY TO ALL
JUST WONDERING IF ANYONE COULD ANSWER THIS
CAN YOU CONNECT A SHUFFLE (gen4) TO A KENWOOD CAR STEREO USING THE SHUFFLE USB CABLE ?
I CAN USE AN AUX 3.5 TO 3.5 BUT NO WAY TO READ THE LIBRARY. PLEASE HELP ME!
THANK-YOU
ABIGMAC1

Check the documentation for the car audio system for device compatibility. A shuffle may not be compatible.
If the car audio system is able to use a regular USB flash drive connected to the USB port, you should just get an 8GB USB flash drive for $5-10, load it with your "car songs" and leave it connected to the car audio system, instead of constantly connecting and disconnecting an iPod.
If the car audio system has an aux. audio input mini-stereo jack, you can get something like this
http://www.amazon.com/Monster-iCable-Player-Auxiliary-Input/dp/B002AR5XIK
and connect your shuffle's headphones jack to the car audio system. You can then use your shuffle to play through the car audio system.

Apple iPod USB Device driver issue on Win XP - syncing shuffle 2nd gen.

Hello fellow iPod shuffle users. Any of you run into this problem using the following configurations? Any advise/recommendations/workarounds much appreciated as I've burned 3 days on this issue and I'm still stonewalled.
I personally think it's a device driver issue/bug and am searching for a way to update my Apple iPod USB device driver for Win XP. Two brand new ipod shuffles (received for Christmas 2008) are both behaving this way, so the problem most likely points to a global software issue more-so than to shuffle hardware issue.
PROBLEM STATEMENT: Driver data i/o streaming issue does not allow shuffle to sync data with iTunes after initial sync (i.e. reading the content of the shuffle is good, but writing modified content fails). Posted error message "The ipod ... cannot be synced. Required disk cannot be found". After cracking the hood on my device driver, the problem seems to point to the Apple iPod USB device driver for Win XP. Driver will recognize the shuffle and read to it, but subsequent write attempts will result in device driver balks that "this device cannot start (code 10)".
ATTEMPTED WORKAROUNDS:
*Read All "How to Get Started Manuals" to make sure I was using the right technique for syncing my two shuffles from within iTunes... tried and failed
*Ensure only one shuffle was plugged in at a time (saw notice that two shuffles plugged in at the same time is not yet a supported config)... tried and failed
*The 5 R's as recommended by Apple Support... tried and failed.
*I've tried all 3 built in USB ports on my Lenovo T60. no love... tried and failed.
*Per discussion board: From Window's Device Manager-> Scaned for new hardware while shuffle was syncing...tried and failed.
* Per Discussion board: From Window's Disk Management -> Ensured shuffle came up as a FAT32 filesystem... connection tore down as quickly as windows recognized it.... tried and failed.
*From Windows Software config utility: Ran repair to re-install itunes 8... same results.
*From Windows software management utility: Uninstalled and reinstalled itunes 8... same results.
Hardware: IBM Thinkpad/Lenovo T60. Using build in k/b & no external mouse. Has 3 USB built in ports.
Software: Windows XP Pro SP2/iTunes 8.0.2/shuffle (2nd gen) driver 1.0.4 (same behavior using the original driver 1.0.3).
Apple iPod USB Device properties:
Driver Provider - Microsoft
Driver Date - 7/1/2001
Driver Version - 5.1.2535.0
Digital Signer - Microsoft Windows Publisher

Hi. Ive got pretty much the same problem.... Got a new shuffle for christmas..having real problems syncing with itunes. Funnily enough I managed to get 25 tracks on it but then it just stopped. error message says " The ipod shuffle cannot be synced. The required disk cannot be found." Ive done restore, and downloaded a reset utility thingy to try but still no joy.

Shuffle USB Problem - Some Observations

I decided to start a new thread with some additional observations I have made regarding the Shuffle and USB problems. Some of this already appeared as a reply to the "ipod usb" thread. Anyway recapping from my previous post:
When plugged into the USB port of my machine, the front LEDs (above the control area) flash the following:
GREEN and ORANGE (YELLOW?) flash together for between 1/4 and 1/2 second. This is followed by the GREEN LED alone for about 1.5 seconds. 3 seconds of nothing, then it repeats. The battery condition LED on the back (below the ON/OFF switch blinks ORANGE for about 1/4 second every 4 seconds.
Plugging the Shuffle into another computer (a laptop), the Shuffle is recognized and the LEDs behave normally.
Now the weird thing is that the Shuffle had worked on the machine where it is now not recognized. In fact the iTunes 7.0.1 diagnostics show the serial number of the Shuffle as the last iPod connected. Also, the USB on the iTunes machine is a USB 1.0 and on the laptop is USB 2.0.
NEW OBSERVATIONS:
My 20GB Click Wheel iPod works fine under 7.0.1. The fact that it works leads me to believe the USB port and power are fine. If it the USB port can drive a hard disk iPod, it better be able to drive a Shuffle!
I loaded up the version of iTunes that came with the Shuffle on another Windows 2000 box I have. The Shuffle was recognized and did a RESTORE on it. Windows even recognized it. The version of Windows IS NOT as currently patched as the computer on which I have iTunes 7.0.1 installed.
I uninstalled iTunes 7.0.1 and installed version 6.0. Aside from 6.o not starting because some file got converted, Win2000 still did not recognize the Shuffle.
So here are my thoughts:
1) A recent Windows 2000 patch causes Shuffles to be ignored by the OS. There is a comment about a problem like this with XP, but I was not able to find anything Win2000 related. The machine I am having problems with is up to dat with regard to patches.
2) If V7.0.01 is the problem, even uninstalling it and reinstalling an old version of iTunes leaves some part of the driver or something that still causes problems.
3) The Phillips Pronto remote software I installed somehow causes a bad interaction with only the Shuffle. Remember, my click wheel iPod still works!
Right now I am leaning towards an issue specific to Windows2000 and the Shuffle. Maybe a conspiracy to get us all to buy Zunes?
If anyone has additional observations or suggestions on how to fix the problem, I (and a bunch of other people) would really like to hear from you.
Thanks!
Don

Okay, I got focused on the fact that other machines
would recognize my Shuffle, but not my main machine.
It dawned on me that the Windows Registry stores
information about USB devices whether or not they
are plugged in, so I snooped around and found the
entries for the iPod.
I did some searches and found a reference to this MS
KB article:
http://support.microsoft.com/kb/315539/en-us
Basically describes how to show the "hidden" (i.e.
removed USB) devices. Went into the USB section and
deleted the 2 entries I had for iPods (my Shuffle and
20GB click wheel).
Plugged my Shuffle in and BINGO! Windows recognized
the Shuffle and iTunes 7.0.1 recognized the Shuffle!
In fact, as I write this post, my poor little
Shuffle is having my jogging play list reinstalled
since it got wacked by the 'restore' on the other
machine.
Bottom line, it looks like I managed to solve my
green and orange LEDs of death problem!
Your mileage may vary!
Good luck!
Don
Yes, great, this is a fix for this problem. Thank you very much.
Athlon Windows XP

4th generation shuffle "USB Device Not Recognized"

After a trip to the Apple Store with my iPod in which they diagnosed my iPod as being a "dud," I happily came home to plug in my new iPod, which...LOW AND BEHOLD...displayed the same issues. Here is what is happening:
1. I plug in my iPod Shuffle to my HP Pavilion running Windows 7.
2. I hear that noise (boo-boop)recognizing that a device has been plugged into my USB drive.
3. A message pops up in the right-hand corner of my computer that reads, "USB Device Not Recognized" at which point I click for more information.
4. The detailed view shows the following message: "Windows has stopped this device because it has reported problems. (Code 43)"
What I've already tried:
1. Uninstalling and Re-installing all of the drivers under the Universal Serial Bus Controller in the Device Manager.
2. Running updates on iTunes and on my Windows Operating System.
3. Updating iPod drivers.
PLEASE HELP! I am frustrated. I had a 2nd generation Nano that was stolen out of my car, but it worked fine for years. Also had an old shuffle (2nd generation) that worked fine with this computer/operating system. Any advice helps, I don't want to wait another 2 hours at the Apple Store only to be sent home with another device that doesn't work with my computer.

Did you try this:
http://support.apple.com/kb/ht1925
It sounds like the Apple USB stuff is your problem. I would just do the full uniinstall and reinstall.
Make sure you connect directly to computer, not through a USB hub.
If none of that solves the problem, try creating a new user and see if it works when you log on as that new user. If it does work, you know you have something installed on your normal account that is fooling with the iPod.
i

How to install this update and solve USB and touchpad issues?

I have Equium M50 (59E) and got bitten by an update that took out my touchpad and keyboard .I have made fresh install of XP Home and have all updated drivers and all is going well .The last update i cant seem to fathom is for
Driver Ana _2005_10_24_V1.2 it is for ,Standard Open HCD USB Host Controller........X 2 .........
The update fixes all kinds of issues of the kind i am having and is a recomended update from Driver detective ,that i use offten .
The trouble is it says to uninstall drivers for the one i have installed allready and when i do this it knocks off my USB mouse leaving me not able to install the new ones .When i reboot it installs the ones i dont want reinstalled .
This is the read me off the new update and realy it is beyond me to underdstand what to do ............so here it is ?
Driver revision history:
Twinhan VP704A Driver Release note
Note:
1.In case the system crashes while running with VP704A, Please install ULI
USB 2.0 host driver in \ULiUSB20Driver
2. For XP/SP1, please update with the patch in
<http://www.microsoft.com/downloads/details.aspx?displaylang=zh-tw&familyid=733dd867-56a0-4956-b7fe-e85b688b7f86>
3.In XP/SP1, updating driver will crash the system, while new install is ok.
The trick to update driver in XP/SP1 is shown in the following steps,
a. Uninstall the driver
b. Unplug and plug the USB device
c. Install the driver
4. To support remote controller, please launch Agent.exe in \Agent.
Further details can be found in \Agent\Readme.txt
Known issues:
1. Multi-instance is not supported
2. Remote wakeup is not supported
3. High CPU usage in Analog audio/video capture
4. Bad VBI Signal using YUY2 color format
5. AV out of sync if audio captured from wrong filter.
(Fix:using the filter "USB Audio Device" in WDM stream capture device)
6. Noise with analog-TV and FM Radio
(Fix:using the filter "USB Audio Device" in WDM stream capture device)
Driver revision history:
2005/10/24, Version: 1.0.2.8
Bugs fixed and new features:
1.Crossbar not properly set.
2005/10/21, Version: 1.0.2.7
Bugs fixed and new features:
1.Firmware version read from FLASH OK!
2005/10/14, Version: 1.0.2.6
Bugs fixed and new features:
1.Mutil-Access driver blank part below part screen when VBI!
2.Mutil-Access driver HCT driver verify crash fix!
2005/10/07, Version: 1.0.2.5
Bugs fixed and new features:
1.Tuner Power off when S-Video,Composite.
2005/09/30, Version: 1.0.2.4
Bugs fixed and new features:
1.Agent.exe updated for repeat bug!
2.TI5150 Register for Video Format fix!
2005/09/29, Version: 1.0.2.3
Bugs fixed and new features:
1.A trial driver build for multiple access support. (in the folder "\Multi-Access")
Note: "USB Audio device" filter provided by system does not support mutil-Access.
2.Reset TI5150 when a new frequency is set
2005/09/27, Version: 1.0.2.2
Bugs fixed and new features:
1.Fix I2C unstable access on some devices.
2005/09/23, Version: 1.0.2.1
Bugs fixed and new features:
1.Analog TV becomes darker sometimes.
2005/09/15, Version: 1.0.2.0
Bugs fixed and new features:
1.Fix INF for Windows 2000 installation.
2.FM radio scan policy changed!
2005/09/13, Version: 1.0.1.9
Bugs fixed and new features:
1.USB serial number string not visible with USBView, firmware update required.
2.FM radio scan policy, return unlock if PLLOffset>=9x12.5KHz
2005/09/13, Version: 1.0.1.8
Bugs fixed and new features:
1.After switching between A/D/AV several times, video display becomes dark in THDTV 2.61
2005/09/12, Version: 1.0.1.7
Bugs fixed and new features:
1.Improve channel lock status check performance
2.Pinnacle INF Fix.
2005/09/09, Version: 1.0.1.6
Bugs fixed and new features:
1.Add some audio initialization function.
2005/08/31, Version: 1.0.1.5
Bugs fixed and new features:
1.NTSC & PAL mode resolution separation.
2005/08/30, Version: 1.0.1.4
Bugs fixed and new features:
1.AvgTimePerFrame.
2.Frame Drop.
3.Pinnacle inf file HCT chkinf fail.
2005/08/22, Version: 1.0.1.3
Bugs fixed and new features:
1.Add Remote controller interface in digital source filter.
2.A new Remote controller test tool with source code in \Test_RC.
2005/08/16, Version: 1.0.1.2
Bugs fixed and new features:
1.Reorg Pinnacel & Twinhan's driver & folder.
2.VP704A_BDA_Test tool, add system code test.
3.Set IR protocol standard by registry keys "IRSTANDARD", "IRSYSCODECHECK1" in INF file.
4.Firmware update
2005/08/15, Version: 1.0.1.1
Bugs fixed and new features:
1.Serial number function is lost while adjusting TV audio volume
2.RC6A CIR support
(This firmware uses GPIO3 (M9207 pin 80) to decode RC6 protocol.
The hardware should be reworked to connect M9207 pin 80 to CIR module and the fimrware
EEPROM should be flashed with \Firmware\M9207.bin )
3.Serieal number, MAC address and OEM device name supported.
Please refer to further details in \Firmware\readme.txt.
4.Ioclt sample source code included.
2005/08/08, Version: 1.0.0.10
Bugs fixed and new features:
1.Analog TV audio volume increase.
2005/08/04, Version: 1.0.0.9
Bugs fixed and new features:
1.Analog TV Video mode set failure.
2005/08/03, Version: 1.0.0.8
Bugs fixed and new features:
1.Off-centerf requency scan +/- 125Khz
2.Fix duplicated program scanned in MCE.
2005/08/02, Version: 1.0.0.7
Bugs fixed and new features:
1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate" bug fixed
2005/07/28, Version: 1.0.0.6
Bugs fixed and new features:
1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate" support
2.Improve I2C communication stability.
3.Unify Signal strength & quality indication as THBda ioctl interface.
4.Capture filter Lock status check.
2005/07/28, Version: 1.0.0.5
Bugs fixed and new features:
1. The same signal strength & quality indications as VP7046.
2. Debug build driver
2005/07/21, Version: 1.0.0.4
Bugs fixed and new features:
1.Update INF.
2005/07/20, Version: 1.0.0.3
Bugs fixed and new features:
1.Improve performance in PCM4
2.Switching from Analog TV Mode to FM Mode failure
2005/07/04, Version: 1.0.0.2
Bugs fixed and new features:
1.Production Tool FM test OK!
And here is the readme from the other file within the update ?
ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME , Windows 2000 and Windows XP
INTRODUCTION
This driver supports ULi EHCI host Controller under Windows 98 SE, Windows ME , Windows 2000
and Windows XP.
CONTENTS OF THIS DOCUMENT
1. Installation Instructions
2. Uninstallation Instructions
1. Installation Instructions
(Windows 98 SE & Windows ME)
A.When ULi USB 2.0 Controller has attached on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system,then restart your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller" and install the driver.
B.If no ULi USB 2.0 Controller on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system, then turn off your computer.
- Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller" and install the driver.
(Windows 2000)
A.When ULi USB 2.0 Controller has attached on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will install and load the driver and you don't have to reboot the
computer.
B.If no ULi USB 2.0 Controller on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system, then turn off
your computer.
- Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller" and install the driver.
(Windows XP)
A.When ULi USB 2.0 Controller has attached on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- Click "NEXT"
- This program will install and load the driver and you don't have to reboot the
computer.
- After install ULi USB 2.0 driver successfully. System will detect "USB 2.0 Root
Hub". Please select "install the software automatically (Recommended)" and then
click "Next" button to continue install.
- This program will install and load the driver and you don't have to reboot the
computer.
B.If no ULi USB 2.0 Controller on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system, then turn off
your computer.
- Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller", continue to install.
- After install ULi USB 2.0 driver successfully. System will detect "USB 2.0 Root
Hub". Please select "install the software automatically (Recommended)" and then
click "Next" button to continue install.
Notice:
If you can't setup driver successfully. Please reboot your system and then follow
above steps to install driver again.
2. Uninstallation Instructions
1. Open "Control Panel" folder.
2. Invoke "Add\Remove Programs" icon.
3. Choose "ULi USB2.0 Driver" item.
4. Click on "Add/Remove" button to remove drivers.
Change List:
1.74
1.fix issue that multi-interface keyboard can not be detected on the usb2.0 hub.
2.support all USB2.0 Host Controller.
1.73
1.fix issue that On Win98SE , Blue screen when unplugging some USB2.0 Scanner after scanning image.
2.fix issue that On Win98SE, Blue screen when unplugging some USB2.0 Scanner from USB 2.0 Hub after scanning image.
3.fix issue that On Win98SE, Blue screen while copying files across the SUNBOX UH-204 Hub.
4.fix issue that wirless lan will disconect when plug-in usb device.
1.72
1.Fix issue that system will crash when USB HD copy large file.
1.71
1.improve Power management function in Win98/ME.
1.70
1.Improve the function of devcie detection.
1.62
1.Fix the problem that a USB floppy under USB 2.0 HUB cannot function when system resume from suspend.
1.61
1.Fix the problem that some USB device under USB 2.0 HUB cannot be found if system resume from suspend.
1.60
1.To support power management functions when a HUB with USB device plug into
a root HUB.
1.57
1.Fix USB floppy with USB 2.0 HUB can't be detect issue.
2.Fix issue that audio can't display smooth when USB device attach to system.
3.Fix system can't detect USB dvice when USB device attach to system in
suspend mode.
4.Fix issue that when USB root HUB have full loading, USB HD sometimes
transaction fail.
1.56
1. Fix issue that DVD decoder device can't display properly.
1.55
1. Fix OTI USB 2.0 hand drive can't be detect issue.
2. Fix USB mouse can't use after resume from suspend.
1.54
1.Improve driver security.
1.53
1. Fix bulk transfer may stop if USB device is plugged in USB 2.0 hub
2. Fix USB 2.0 mass storage device can't be access after resuming from standby if there is another USB 1.1 device existing
1.52
1. Fix system pages fault when accessing mass storage device in Win98SE, or scandisk failure when selecting
automatically fix file system errors
2. Fix system may hang up in Win98SE/ME if USB 2.0 cardbus card is plugged
v.1.51
1. Improve USB 2.0 cardreader compatibility.
2. Fix USB IDE devices can't be accessed after resuming from standby/hibernation.
v1.50
1. Improve bulk transfer
v1.48
1. Fix USB 2.0 LAN driver installation hanging up
2. Fix some USB 1.1 cardreader can't be identified when plugged into USB 2.0 hub
3. Fix some laptops Win98SE booting hanging up
v1.47
1. Improve bulk transfer performance.
2. Fix USB 2.0 bulk webcam preview failure.
v1.46
1. Support USB 2.0 and 1.1 Isochronous devices
2. Fix system hanging up when rebooting system if USB 2.0 host controller is disabled in Win9X/ME
3. Fix system hanging up when uninstalling driver if there are USB 2.0 devices connected in Win2K/XP
4. Improve device detection capability in Win9X/ME
v1.45
1. Fix system hanging up when resuming from ACPI sleep mode.
2. Fix mouse sometimes doesn't disappear when it's unplugged.
3. Fix Win9X composite device detection failure and improve Win2K/XP composite device
v1.44
1. Support composite device
2. Improve device detection
v1.43
1. Improve IDE read/write transfer failure rate with USB 2.0 to IDE bridge on PC card platform
2. Fix high-speed device detected as full-speed device
3. Fix some USB mouses detection failure problem
4. Fix some USB 2.0 hubs detection failure problem
5. Fix Win98SE crashing if ULi EHCI 1.42 is installed
v1.42
1. Fix PC Card ejection hanging up in Win98/ME
2. Fix suspend/resume hanging up in Win98
3. Solve sometimes USB 1.1 device can't be detected if OS boots with USB 2.0 and 1.1 devices plugged
4. Fix some PC Card USB 1.1 device detection failure
v1.41
1. Add new feature that system can install driver before device is plugged.
2. Fix PCMCIA OHCI controller resource assign issue on Windos ME.
v1.40
1. Support Win9X/ME/2K/XP with ULi USB 2.0 driver.
2. Fix PCMCIA EHCI controller detecting USB 2.0 device problem in Win9X/ME.
v1.32
1. Fix issue that driver can't detect Microsoft driver in Windows XP
if OS path is not c:\windows.
2. Fix issue that driver can't detect USB 2.0 controller device in in some system.
v1.31
1. Fix issue that driver can't install on Windows 2000.
v1.30
1. Fix issue that Win9X/ME shows no USB 2.0 Root Hub.
2. Fix issue that hanging up when second entry into Win9X S1 with HID device plugged.
3. Fix issue that sometimes when you click "Scan for hardware changes".
to PNP ULi USB2.0 controller, system will informs you the usbehci.sys
file can't be found.
4. Fix issue that v1.20 finds no EHCI controller to install driver for after different
verison of ULi EHCI controller devices are plugged and unplugged.
5. Support installing driver for more than one ULi EHCI controller devices existing on
system at the same time.
6. Fix Win2K/XP shows USB Root Hub for USB 2.0 Root Hub.
v1.20
1.Support ULi USB 2.0 Host controller driver for Windows 98SE/ME/2000/XP.
ULi Coporation. (ULi) web sites:
http://www.uli.com.tw/ (Taiwan)
CAN ANYONE TREAT ME LIKE A TWO YEAR OLD AND GIVE SOME GUIDANCE AS TO HOW TO ACHIEVE THIS UPDATE .
i WOULD BE VERY GRATEFULL AND KIND OF THINK IT WOULD BE BENIFICIAL TO A LOT MORE PEOPLE AS I SEE A LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSED TO FIX .

It says above 2 relevant and 1 correct answere available .............
I'm new here so could anyone direct me to these answeres?

Canon IR c1028 - USB and Mac issues

I have a Canon IR c1028:
http://www.usa.canon.com/cusa/support/office/color_imagerunner_copiers/color_imagerunner_c1030_c1031...
I have it USB attached and Network attached. The network attached prinitng works fine but one of my home compouters is habitually attached to my coprporate VPN and so I use USB attachment. I have recently started having issues with printing from the MacBook which runs YOSEMITE as follows:
1. Instal the printer using the driver from the above link (printer appears to be connected and online)
2. Send print job to printer....printer makes a sound in recognition but if you watch the print queue from the Mac you see a cycle of:
Priniting
The printer is not connected
The printer is offline
This repeats every time and it does not resolve if you delete the printer and even if you reset the printer subsystem before re-installing
Thanks for ideas ?

Hi, bluemoon. Thanks for posting!
While our forum community members are welcome to chime in, Canon does not provide direct support for imageRUNNER series products. Instead, your dealer will be able to help you! If you don't have a dealer, please call us at 1-800-OK-CANON (1-800-652-2666) and we will be happy to provide you with the names of dealers in your area!
We hope this helps!

USB 3 Instability Issues - Windows 8.1 - Windows 8, The USB 3 Stack Is Unstable On Multiple PCs And Many Devices

The USB 3 stack is unstable in Windows 8.1 and Windows 8. I was hoping the upgrade to Windows 8.1 would improve the stability but no.
On two different motherboard systems I have had the same experience with 64 bit Windows 8 Pro and Windows 8.1 Pro compatibility with various USB 3.0 devices and hubs including:
An AFT PRO-57U front panel card-reader/hub, various Anker, Syba multiport hubs, and these are just a few I have tried, there are many more.
Symptoms are the same.
For example: the AFT PRO-57U slots are enumerated correctly as drive letters in Windows 8.1.
Then the drives (the PRO-57U slots) disappear, then reappear, then disappear, and reappear and so on. This happens consistently and the cycle time to disappear/reappear varies from 10 seconds to 10 minutes.
The Windows Device Manager shows the devices appearing and disappearing as enumerated devices. I have tried many trial and error methods to solve this, uninstalling and reinstalling USB motherboard drivers, different cables to the AFT PRO-57U device different
USB 3 ports for the devices and many more...
One of the hubs I bought specifically because it has the latest chip and firmware: Anker® USB 3.0 9-Port Hub + 5V 2.1A Smart Charging Port with 12V 5A Power Adapter [VIA VL812-B2 Chipset and updated Firmware 9081] This hub FAILs to enumerate some external
HDDs and other devices.
To troubleshoot I have tried many things:
I have disabled Windows Power Options, USB Selective Suspend.
I have disabled power options for each and every USB device in Windows Device Manager
I have uninstalled the Asus AI Suite 3 software and the issues remain.
I have tried BIOS settings for Legacy USB devices on and off and the issues remain.
I have tried BIOS setting for xHCI Mode - Auto, Smart Auto, On, Disabled
I have updated to the latest Intel chipset drivers 9.4.0.1026
I have all the latest BIOS, drivers, firmware, devices, - anything that is involved with the USB 3 stack.
Etc. etc. etc...
I have contacted Asus, Gigabyte Intel, AFT, Anker Syba, etc. and they are all finger pointing.
I have tried so many trial and error methods to solve the problem and I have run out of ideas.
It is clearly an unstable USB 3 stack and I am not sure who is responsible although I suspect Intel chipset drivers.
USB 2 is fine BTW. All devices work correctly when plugged into USB 2 ports.
From what I can tell, the entire USB 3 environment is a problematic P.O.S.
If anyone has any ideas I am willing to try anything I have not already tried.
Thanks,
Michael Downs
P.S. Here is my system information. I have all the latest BIOS, updates, drivers and etc. for all devices.
ASUS Maximus VI Formula w/ BIOS 1002
Intel Core i7-4770K BX80646I74770K
G.Skill Trident X 16GB (2 x 8GB) DDR3 2400 Model F3-2400C10D-16GTX
Samsung 840 Pro 256GB SSD Seagate Constellation CS ST3000NC002 3TB 7200 RPM 64MB
EVGA GeForce GTX 760 ACX 2GB 256-bit GDDR5
Corsair Carbide Series 330R Mid-tower Case
Corsair RM850 850W 80 Plus GOLD Certified
Cooler Master Seidon 240M - Liquid CPU Water Cooler
Pioneer 15X BD-R SATA Blu-ray Burner BDR-2208
AFT PRO-57U All-in-one USB 3.0 5.25" Media Card Reader
Then there is a similar system with the exact same USB 3 issues:
Gigabyte - GA-Z77X-UP4TH
Intel i7 3770K
etc.
mdd

Hey, I hope this helps you out a bit... I have had the same issue on my Asus K55A notebook with Win8.1 Pro x64 from the beginning! Thru my extensive research I found something interesting and the possible cause to all this! What I found was that by design
the xHCI Host Controller has virtual HS 2.0 Ports linked to the 3.0 Ports... Enabling compatibility with 2.0 devices ok... What happens is that the xHCI stack is unstable just like you say... The ONLY WAY I was able to fix the problem was by unlocking the
UEFI/BIOS to allow me full access to USB Configurations... I had to disable 2 of the HS ports under the xHCI Controller since I have only 2x 3.0 ports... This allowed 3.0 devices to be enumerated correctly under the xHCI stack and 2.0 devices now were enumerated
under the EHCI 2.0 stack... That's what worked in my case... I'm still digging around for more info about this issue because I find it so odd that no one discovered this when designing xHCI stacks and drivers at MS for Win8/8.1 x64... I hope I shed some light
on this issue... Good luck and keep us posted!
Hi, Sebastian. I have the same problem but i'm getting crazy trying to solve it. Can you help me to unlock the UEFI to access full USB config? and give me some suggestions on how to solve the problem?
My mail is roquen(at)gamail(dot)com
Thanks in advance!

USB Flash Drive Issue On iMac - 1.1 on iMac, 2.0 on any other Mac

I have a Core i7 27" Late 2009 iMac.
I just noticed this issue today.
I have a couple of Patriot XPorter XT USB Flash drives that I use among my Macs to transfer big files around.
Hooking one of the 8GB flash drives to my iMac, the one listed above, it shows the device operating at USB 1.1 speeds, whether it's in a powered hub, or one of the 4 USB ports in the back of the machine. This was odd, because this was the first time it had ever done this. I only noticed this due to the painfully slow transfer rate the Finder was reporting to me. Restarting the iMac, cold starting the iMac, resetting permissions, PRAM and SMC did nothing. I thought it was a bum drive.
So I grabbed a 16GB flash drive (same brand and model family, different capacity) and it works perfectly fine on the iMac at USB 2.0 speeds. Hmm...
So I boot the iMac into Win 7 Ultimate x64. Both drives are listed at USB 2.0 speeds. Something is definitely afoot here.
To make sure I'm not losing my sanity, I grab my MacBook Pro and test the drives in there. Both drives are listed at USB 2.0 speeds.
I then run to my Mac Pro. Both drives are listed at USB 2.0 speeds.
Did something go wonky on my iMac?
Machine specs (for comparison above)
iMac 27" i7 2.8GHz - 16GB RAM
MacBook Pro 15" Core 2 Duo 2.4GHz - 4GB RAM
Mac Pro Xeon 2.66GHz - 12GB RAM

I think that you are just running into a communication blip between the thumb drive and the controller for the USB ports on your iMac. It is obviously reading the 8 GB drive as older and slower and is assigning that lessor priority to the bus serving the drive.
Have you tried attaching the drive directly to the iMac with no other device connected to a USB port? If it is the same, then I doubt there is anything that you can do, that is going to be the way the USB controller reads this thumb drive.

USB drive access issues when using Windows Backup Win7Pro

I've run into a similar issue. I'm using an RD1000 USB drive which uses hard drives as removable media. There's an alert which states "Windows backup needs a CD/DVD or USB Drive to continue." It then states I
can continue the backup on the existing media or insert blank media. By simply selecting Continue the backup will proceed but this interrupts the backup every night so the backup won't automatically run until that challenge is responded too. I checked
permissions and reloaded the MS windows driver for the drive. I tried exFat and NTSF formats. Not sure how to force it to automatically proceed. The backup is only a tenth of the size of the total available drive space. Any
ideas?

Checked this URL ?
http://answers.microsoft.com/en-us/windows/forum/windows_7-system/insert-removable-mediawindows-backup-needs-cddvd/5bf0d5ed-ba9d-420e-8b19-b162eb285563
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

10.2.8/Shuffle/USB 1.1 Issues

Similar Messages

Maybe you are looking for