10.3.1: System needs a lot of device memory

Hi,
after updating my Z30 from 10.2.something to 10.3.1 I recognized that the System blocks about 6.8 GB of internal memory (Apps: 2.8 GB, User Files: 535 MB taken from device monitor).
Any idea why the System needs so much memory and how to reduce this number significantly?
Thanks

I have some more information. The problem is not related to the distiller, but to the printing backend of acrobat 8.1. After generating the postscript with acrobat 8.1 an additional image of 1x1 pixel is generated in the pdf (after distilling with distiller 8.1). This is not the case if I generate the same postscript with acrobat 7 and distill with distiller 8.1.

Similar Messages

  • Report RSXMB_RESTART_MESSAGES needs a lot of resources

    Hi,
    we are using PI 7, SPS9.
    When we have a heavy load in XI, we are getting sometimes JavaNullPointer-Exceptions in Java-mappings, so we have to restart these messages - no problem!
    There is the report RSXMB_RESTART_MESSAGES to restart failed messages, but when I defined it as a job (every 1 hr) and during this time we have a lot of messages (but only some are failed), the job never ends and it needs a lot of resources!
    In the queues I can see a lot of entries made by the report.
    Our report still have the field "max restarts" and I entered 5 restarts!
    What can I do?
    Thanks a lot!
    regards
    Wolfgang Hummel

    Hi Sandro,
    thanx for your answer.
    This is a test system and at the moment I just defined jobs for deleting and not for archiving.
    My problem is, that we have a sender with thousands of messages via the same interface for the same receiver and sometimes a message failed ('cause of NullPointerException in java mapping).
    To define a filter in the report RSXMB_RESTART_MESSAGES is no solution 'cause the filter cannot reduce the number of messages (it's always thousands of messages).
    When the job starts during less traffic, I don't have any problems - it's just a problem during heavy traffic.
    regards
    wolfgang

  • I use itunes on a Dell XPS502 with W7/64. In some cases have have problems to import CD's. The sound is very disturbed and the import need a lot more time than in normal cases. Is there a problem between itunes W7/64 or a known hardware issue?

    I use itunes on a Dell XPS502 with W7/64. In some cases have have problems to import CD's. The sound is very disturbed and the import need a lot more time than in normal cases. Is there a problem between itunes and W7/64 or a known hardware issue?
    Example-CD : "Tracy Chapman , Telling stories" is not able to import . I have more such negative cases. But in other cases it works fine and the sound is great.
    The firmware at the inbuild CD/DVD DS-6E2SH is the latest version.
    What can I do??

    hi b noir,
    I don't no about virtuel drives like you mententioned. In the mean time I have rebooted the XPS and run again the iTunes diagnostics. I think the back - chance in the registry was not ready to use.  Now there are another results. They are the same in case of a running CD or a not running CD. The difference in total is like before. It takes more time that iTunes reads the (bad) CD and at the there is no good sound. In both cases ( running or not running CD) iTunes diagnostics gives as a result :
    (the copie from ITunes shows the result of the not running CD from Tracy Chapman)
    Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
    Dell Inc. Dell System XPS L502X
    iTunes 10.3.1.55
    QuickTime 7.6.9
    FairPlay 1.11.17
    Apple Application Support 1.5.2
    iPod Updater-Bibliothek 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.4.0.25
    Apple Mobile Device Treiber 1.55.0.0
    Bonjour 2.0.5.0 (214.3)
    Gracenote SDK 1.8.2.457
    Gracenote MusicID 1.8.2.89
    Gracenote Submit 1.8.2.123
    Gracenote DSP 1.8.2.34
    iTunes-Seriennummer 00D7B2B00CD25750
    Aktueller Benutzer ist kein Administrator.
    Aktuelles Datum und Uhrzeit sind 2011-06-11 19:33:22.
    iTunes befindet sich nicht im abgesicherten Modus.
    WebKit Accelerated Compositing ist aktiviert.
    HDCP wird unterstützt.
    Core Media wird unterstützt.
    Info zu Video-Anzeige
    NVIDIA, NVIDIA GeForce GT 540M
    Intel Corporation, Intel(R) HD Graphics Family
    **** Info für externe Plug-Ins ****
    Keine externen Plug-Ins installiert.
    iPodService 10.3.1.55 (x64) arbeitet zurzeit.
    iTunesHelper 10.3.1.55 arbeitet zurzeit.
    Apple Mobile Device service 3.3.0.0 arbeitet zurzeit.
    **** CD/DVD-Laufwerkstests****
    LowerFilters: PxHlpa64 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.2.0.1),
    D: PLDS DVDRWBD DS-6E2SH, Rev CD11
    Audio-CD im Laufwerk
    11 Titel auf der CD gefunden, Spieldauer: 42:07 auf Audio-CD
    Titel 1, Startzeit: 00:02:00
    Titel 2, Startzeit: 03:59:47
    Titel 3, Startzeit: 07:19:27
    Titel 4, Startzeit: 11:31:30
    Titel 5, Startzeit: 15:31:50
    Titel 6, Startzeit: 20:07:50
    Titel 7, Startzeit: 24:27:15
    Titel 8, Startzeit: 27:49:10
    Titel 9, Startzeit: 32:41:25
    Titel 10, Startzeit: 35:29:65
    Titel 11, Startzeit: 38:38:00
    Audio-CD erfolgreich gelesen (Suche nach alter Firmware).
    Laufwerksgeschwindigkeit erfolgreich erkannt
    Die CDR-Geschwindigkeiten des Laufwerks sind:  4 10 16 24
    Die CDRW-Geschwindigkeiten des Laufwerks sind:  4
    Die DVDR-Geschwindigkeiten des Laufwerks sind:  4
    Die DVDRW-Geschwindigkeiten des Laufwerks sind:  4
    After starting the import it is going slower and slower. If it is helpful I can send you a soundfile with these distortions.
    best regards
    tcgerd

  • Hard drive died.  Need to reinstall on new laptop with windows 7 64 bit system,  Need to get activation code for CS3 Web Premium.

    Hard drive died.  Cannot uninstall CS3 to remove copy registration. Need to reinstall on new laptop with windows 7 64 bit system,  Need to get activation code for CS3 Web Premium.

    Thank you Bob.
    Just to clarify - in terms of backing up one set of these, would that just be so I had it on disk and didn't need to re-download from Adobe if the installation got corrupted somehow?  Or do I need a backup for some other reason?
    Thanks

  • System need to pick a particular GL account automatically

    Hi,
    The PO/PR if need to create without material number (whatever the material group), for an account assignment category F, system need to pick a particular GL account. How to configure this?
    I have tried by linking the material grps with valuation class, then linking the valuation class with GL account for GBB VBR. But this is not correct, because system picks the same GL account even for consumption PO also(The PO for a cost center)
    How to achieve the above requirement, please advice.
    Regards,
    Sattuj

    hi
    consult ur FI person for this
    try making new gl acct and new val class now
    assign ur mat grp to the val class
    now while doing the posting system will give the error for the acct ssignmet
    solve them using ur new val class and gl acct
    then agin try full cycle
    the acct to the cost center is defauled in OKB9 try removing it so system will ask u for the acct at time of transaction
    regards
    kunal

  • Cisco Wireless Control System need wireless Lan Controller ?

    Cisco Wireless Control System need wireless Lan Controller , for Rogue detection

    Hi Joao,
    The WCS is used in conjuntion with the WLC (Wireless Lan Controller) for Rogue Detection. It is not a must for this function but more of an add-on :)
    The Cisco WCS is an optional network component that works in conjunction with Cisco Aironet Lightweight Access Points, Cisco wireless LAN controllers and the Cisco Wireless Location Appliance.
    From this doc;
    http://www.cisco.com/en/US/products/ps6305/index.html
    Overview of WCS
    The Cisco Wireless Control System (WCS) is a Cisco Unified Wireless Network Solution management tool that adds to the capabilities of the web user interface and command line interface (CLI), moving from individual controllers to a network of controllers. WCS includes the same configuration, performance monitoring, security, fault management, and accounting options used at the controller level and adds a graphical view of multiple controllers and managed access points.
    WCS runs on Windows 2003 and Red Hat Enterprise Linux ES 4.0 and AS 4.0 servers. On both Windows and Linux, WCS can run as a normal application or as a service, which runs continuously and resumes running after a reboot.
    The WCS user interface enables operators to control all permitted Cisco Unified Wireless Network Solution configuration, monitoring, and control functions through Internet Explorer 6.0 or later. Operator permissions are defined by the administrator using the WCS user interface Administration menu, which enables the administrator to manage user accounts and schedule periodic maintenance tasks.
    WCS simplifies controller configuration and monitoring while reducing data entry errors with the Cisco Unified Wireless Network Controller autodiscovery algorithm. WCS uses the industry-standard SNMP protocol to communicate with the controllers.
    From this good doc;
    http://www.cisco.com/en/US/products/ps6305/products_configuration_guide_chapter09186a00806b7270.html#wp1131195
    Detect and Locate Rogue Access Points
    From this WCS doc;
    http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806f070a.shtml#new5
    Rogue Detection under Unified Wireless Networks
    http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080722d8c.shtml
    Hope this helps!
    Rob

  • Why does the system need two average costs - 'Average' and 'Average Rates'?

    Hello Gurus!
    The documentation does give definitions for 'Average' and 'Average Rates' cost types, but at a very basic level.
    http://docs.oracle.com/cd/A60725_05/html/comnls/us/cst/settask.htm
    I would like to know why the system needs two costs? How are they calculated and how are they used?
    Thanks!

    Hello,
    I can suggest you a workaround that will help you keep only the 64-bit version of Photoshop.
    Visit "Uninstall a Program" in Windows 7 Control Panel and uninstall Photoshop completely.
    Visit this page and download trial version of Photoshop.
    Run the installer manually and choose the 64-bit version only (uncheck 32-bit version).
    Launch the product and specify your Adobe ID credentials.
    The product will switch to non-trial (i.e. full) mode when it recognizes your Adobe ID.
    Regards,
    Amit Batra
    Engineering Manager,
    Amit Batra

  • Need Inspection lot creation at only one storage location level - QA07

    Hi,
    I have shelf life expired material at different storage location. When ever i run QA07.System generates inspection lot for all storage location.But I want to process the inspection lot for only one storage location. Please guide me how can we map this reqmnt.
    Thanks in advance for your relevent response.
    Thanks & Regards
    Kundan Kumar

    Hi,
    Next inspection date is maintained at the batch level, not at the storage location level.
    You can suggest the following solutions if it is feasible in your business scenario.
    Scenario 1: Batch is inwarded in one storage location"A" & stored for some time, then it is transfered to other storage loactions B & C (like production storage locations).
    In this case suggest to transfer the batch to storage loactions B & C just one or two days before the actual consumption of the batch & also keep the opening period  in QA07 sufficient days (between 10-15 days), so that the sytem will create the inspection lot in one storage location "A" . Since the batch is still not transfered to B & C, the system will not create inspection lots in B&C.
    Scenario 2: Batch is inwarded in all the storage locations with the same batch number.
    In this case suggest to inward the same bacth with different batch numbers, keeping the all other characteristic values same
    With Best Regards
    Vithal

  • I had downloaded a pair of albums, and i can´t see it on my iTunes library, neither in downloaded..., i had downloaded a pair of albums, and i can´t see it on my iTunes library, neither in downloaded... I need a lot of help please.

    i had downloaded a pair of albums, and i can´t see it on my iTunes library, neither in downloaded...,. I need a lot of help please

    Do the tracks show up in the Recently Added playlist? If so then something has gone wrong with the index of the Music playlist. Download the current iTunes Free Single of the Week. I know it sounds odd, but it should fix the problem. (Probably adding anything would do.)
    If that doesn't work close iTunes and delete the hidden file sentinel from inside the main iTunes folder, then start iTunes again. It should run a consistency check when it starts up.
    tt2

  • HT5188 Nearly every time I buy a VPP app and download the spreadsheet there are multiple redemption codes that say that they are invalid!  HOW can a code I am getting directly from apple be invalid!!!!!!!!  Seems like your system has A LOT of flaws.

    Nearly every time I buy a VPP app and download the spreadsheet there are multiple redemption codes that say that they are invalid!  HOW can a code I am getting directly from apple be invalid!!!!!!!!  Seems like your system has A LOT of flaws.

    I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

  • What do I need to do to get my cannon camera to upload pictures into iPad . When I plug it in system comes up connected USB device is not supported?

    What do I need to do to get my cannon camera to upload pictures into iPad . When I plug it in system comes up connected USB device is not supported?

    Use the camera's SD card instead.
    Another way. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
     Cheers, Tom

  • Aperture 3 needs a lot, lot, lot of space ;)

    As you can see sometimes Aperture needs a lot of space, to do just update. Can you imagine how much space it will need for whole backup?
    +PS: Library size is around 70GB+

    I'm getting exactly the same message now - were you able to backup eventually?

  • Software needed for the USB device, "USB Interface Controller TEST2.0"

    My mother recently acquired a digital camera. She acquired it from a second-hand store, which did not include an interface cable or software. The manual (and the USB port on the camera) indicates that a male-male USB cable is necessary for photos to be copied to the hard drive.
    I was not successful in locating such a cable at any local electronics store (I assume such a cable is now out-of-date). I purchased one from a seller on eBay. The brand is "e circuit electronics".
    Upon powering up the camera with the cable connected to it and the computer, the following message appeared:
    "Software needed for the USB device "USB Interface Controller TEST2.0" is not available. Would you like to look for the software on the Internet?"
    I clicked "Yes". After an approximate two-minute wait, another message appeared stating:
    "Software Update is not able to connect to the Internet. Please check your configuration and try again."
    I deleted, "Software Update Preferences" in the Preferences folder inside the System Folder, without solving the problem. How do I solve the issue of allowing Software Update to connect to the Internet?

    Thank you for your continued assistance, BDAqua. Unfortunately, the driver you linked to does not seem to be compatible with the camera. It is a driver for the V20 model, whereas my model would correspond to be a V2755, as referenced from a list of other Vivicam models when during a search at the Open Drivers web site.
    From the system requirement about the card reader you gave me, it will not work, as this system is running 9.1. I am hesistant to upgrade this computer to 9.2, as I have experienced system unstability with that version, with even the 9.2.2 update applied.
    In the mean time, I have e-mailed Vivitar regarding this issue, but have as of yet received a reply.
    I am not certain as to other specifics to give you, in order to solve the Software Update problem. Please elaborate.
    Yes eww, the computer in question is able to fully connect to the Internet for all that I need. I am fully aware of the difference between a computer connecting to the Internet, and a computer connecting to a digital camera. I have 15 years of Macintosh experience.

  • "Your system has run out of application memory"! Help, please! Thanks!

    Hi,
    Just got the unsettling message saying "Your system has run out of application memory" and I was instructed to close down applications I wasn't using, including browsers, or I might have problems with my computer. Yeesh. This is scary. Is the solution to buy more RAM? Bear with me, I really don't know what to do, and I'd appreciate your help.
    Thanks,
    Kcat
    Tried to update my product listings, but it wouldn't work. I have OS X Mavericks, 10.9.2 on my iMac desktop.

    There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
    A long-running process with a memory leak (a kind of bug)
    Not enough memory for your usage pattern
    Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
    These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
    When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
    View ▹ Columns ▹ Real Memory
    from the menu bar.
    If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
    The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
    Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
    "Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
    If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
    The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command: 
    sudo leaks -nocontext -nostacks process | grep total
    where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the  leaks(1) man page and the Apple developer documentation for details.

  • "You system has run out of application memory"

    I'm constantly getting this error now.  "You system has run out of application memory"
    machine specs are -
    MACBookPro Retina. 10,1
    2.7 i7
    16 GB 1600 MHz DDR3
    GT 650M 1024 MB
    OSX 10.9.4 (13E28)
    750 GB Solid State drive with 211 GB free.
    does any know what may being going on?  What can I do to fix?
    Thanks in advance for your help.
    Brian

    There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
              A long-running process with a memory leak (a kind of bug)
              Not enough memory for your usage pattern
    Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
    These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
    When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
              View ▹ Columns ▹ Real Memory
    from the menu bar.
    If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
    The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
    Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
    "Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
    If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
    The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
    sudo leaks -nocontext -nostacks process | grep total
    where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the  leaks(1) man page and the Apple developer documentation for details.

Maybe you are looking for