10.3.181.34 vs 10.3.181.35

Hi,
I am running Windows 7 Ult., SP1, and both IE9 and Chrome. My question is
which version of Flash should I download and use?
Thanks,
Jim

I do not know any place from where you can download 10.3.181.35 (on the Adobe site).
Anyway, there will be a new version released tomorrow (Tuesday).

Similar Messages

Flash player 10.3.181.14 requires intel pentium 4 2.33ghz,I have intel CPU T2080@1.73ghz processor

I am trying to use Adobe Flash player at home to simply surf the web. For a long time I've been getting prompts to update Flash Player and however much I updated it the prompts kept on poping up. This got so frustrating I decided i'd try to fix the problem once and for all. So I checked the system requirements Adobe recommend for the update I had been downloading and found one of the minimum requirements to be an intel pentium 4 2.33ghz processor. I checked my system and I have only an intel CPU [email protected] processor. My question is, does this explain why I am having so many problems? I've tried to download an earlier version of Flash Player but I always get redirected to the 10.3.181.14 version. How it has come to this I am not quite sure but I must admit I have removed the Flash Player from my computer at the moment and I'm worried that it was a mistake because will I ever get a working version again? I am running Windows Vista 32bit and Internet Explorer 8 32bit. I am out of my depth so please be gentle!

You might have better luck if you post your question in the Flash Player forum...
http://forums.adobe.com/community/webplayers/flash_player

How do I fix my sons ipod touch it says ipod is disabledtry again in 22,181,090 minutes ????

How do i fix my sons ipod touch it says ipod is disabledtry again in 22,181,090 minutes????

You need to connect to a computer with iTunes and restore...start iTunes, connect the USB end of the iPod cable, then while holding the home button on the iPod, connect the 30-pin connector end of the cable to the iPod. The proceed to recover and restore the iPod.

Can't install 10.3.181.34 Windows 7, Firefox

I can't install Flash 10.3.183.5.
When I use the uninstaller and go to the About Flash page, it shows that it is uninstalled.
When I try to install 10.3.183.5, it gives the message, "Can't install because a version is already installed."
Then if I go to the About Flash page, it says "You have 10.3.181.34 installed", and going to Flash Player Settings in Control Panel, it says I have 10.3.183.5 installed.
What is going on?

Sure. Here is the last part of it (it's long and dates back to last year):
=O====== M/10.3.183.5 2011-08-18+02-20-18.792 ========
0000 [I] 00000010 "C:\Users\Michael\Downloads\uninstall_flash_player2.exe" -force
0001 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0002 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0003 [W] 00001018
0004 [W] 00001037 Software\Macromedia\FlashPlayer\SafeVersions/ 2
0005 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player ActiveX/ 2
0006 [W] 00001019
0007 [W] 00001020
0008 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\RunOnce/FlashPlayerUpdate 2
0009 [W] 00001037 Software\Macromedia\FlashPlayerActiveX/ 2
0010 [W] 00001037 Software\Macromedia\FlashPlayer/FlashPlayerVersion 2
0011 [W] 00001037 Software\Macromedia\FlashPlayer/SwfInstall 2
0012 [W] 00001037 Software\Microsoft\Code Store Database\Distribution Units\{D27CDB6E-AE6D-11CF-96B8-444553540000}/ 2
0013 [W] 00001021
0014 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0015 [W] 00001015 C:\Windows\SysWOW64\Macromed\Flash\NPSWF32.dll 5
0016 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\RunOnce/FlashPlayerUpdate 2
0017 [W] 00001037 Software\Macromedia\FlashPlayerPlugin/ 2
0018 [W] 00001037 Software\Macromedia\FlashPlayer/FlashPlayerVersion 2
0019 [W] 00001037 Software\Macromedia\FlashPlayer/SwfInstall 2
0020 [W] 00001021
0021 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0022 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0023 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
0024 [W] 00001036 Software\Opera Software/Last CommandLine 2
0025 [W] 00001036 Software\Opera Software/Last CommandLine 2
0026 [W] 00001036 Software\Opera Software/Plugin Path 2
0027 [W] 00001036 Software\Opera Software/Plugin Path 2
0028 [W] 00001015 C:\Windows\SysWOW64\Macromed\Flash\NPSWF32.dll 5
=X====== M/10.3.183.5 2011-08-18+02-20-23.125 ========
=O====== M/10.3.183.5 2011-08-18+02-20-28.642 ========
0000 [I] 00000010 "C:\Users\Michael\Downloads\install_flash_player.exe"
0001 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/Version 2
0002 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0003 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/Version 2
0004 [W] 00001037 SOFTWARE\MozillaPlugins\@adobe.com/FlashPlayer/ 2
0005 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player Plugin/ 2
0006 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
0007 [W] 00001036 Software\Opera Software/Last CommandLine 2
0008 [W] 00001036 Software\Opera Software/Last CommandLine 2
0009 [W] 00001036 Software\Opera Software/Plugin Path 2
0010 [W] 00001036 Software\Opera Software/Plugin Path 2
0011 [W] 00001015 C:\Windows\SysWOW64\Macromed\Flash\NPSWF32.dll 5
0012 [I] 00000014 C:\Windows\SysWOW64\Macromed\Flash\NPSWF32.dll
0013 [E] 00001025 C:\Windows\SysWOW64\Macromed\Flash\NPSWF32.dll:32
0014 [I] 00000015 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil10v_Plugin.exe
0015 [I] 00000017 C:\Windows\SysWOW64\Macromed\Flash
0016 [I] 00000019 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
0017 [I] 00000020 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
=X====== M/10.3.183.5 2011-08-18+02-25-44.224 ========

Satellite U200-181 Built-in HDD ERROR

I've bought "Toshiba Satellite U200-181" 2 weeks ago. Recently (2-3 days ago) Ive got problem with built-in HDD.
So the problem is that sometimes I'm getting the message "Built-in HDD ERROR" during Notebook startup. This message "Built-in HDD ERROR" appears from time to time and system stops booting from HDD, but can boot from other bootable devices. First time when message "Built-in HDD ERROR" occurred, it was accompanied by lot of strange clapper pop noise from inside of the Notebook. All other
"Built-in HDD ERROR" messages were accompanied with not so loud and strange clapper pop noise, but still with some pop sounds (not as loud as at first time).
To identify possible problems I saved S.M.A.R.T. data log (see appendix#1).
Additional information: After I've purchased the Notebook Ive made successful BIOS upgrade from version 1.40 to version 1.50 strictly according Toshiba official web-site instructions. After BIOS upgrade system worked well, no ERRORS, no faults. But 3days ago I got "Built-in HDD ERROR" message.
Any ideas? Thank you.
Appendix: #1
================================================== ==========
This report created by Active SMART
http://www.ariolic.com/activesmart/
================================================== ==========
S.M.A.R.T. status
Date: 2007/01/18 20:05:32
Model Name: HTS541080G9SA00
Serial number: MPBDL0XKKE3RBG
Capacity: 80.0 GB
Firmware: MB4OC60R
Drive interface: IDE
Current temperature: 35 C (95 F)
Attribute Name Threshold Value Worst Raw value
1 (01) Raw Read Error Rate 62 100 100 0
2 (02) Throughput Performance 40 100 100 0
3 (03) Spin Up Time 33 253 253 55834574849
4 (04) Start/Stop Count 0 100 100 363
5 (05) Reallocated Sectors Count 5 100 100 0
7 (07) Seek Error Rate 67 100 100 0
8 (08) Seek Time Performance 40 100 100 0
9 (09) Power-On Hours 0 100 100 194
10 (0A) Spin Retry Count 60 100 100 0
12 (0C) Device Power Cycle Count 0 100 100 256
191 (BF) G-sense Error Rate 0 100 100 0
192 (C0) Power-off Retract Count 0 100 100 5177348
193 (C1) Load/Unload Cycle Count 0 100 100 4300
194 (C2) Temperature 0 157 157 231929348131
196 (C4) Reallocation Event Count 0 100 100 0
197 (C5) Current Pending Sector Count 0 100 100 0
198 (C6) Uncorrectable Sector Count 0 100 100 0
199 (C7) UltraDMA CRC Error Count 0 200 253 0

I recommend you to contact Toshiba service partner in your country as soon as possible. The unit is new one and something like this should not happen. Explain them the situation and you will see what they can do about it.
You can also contact your local dealer and try to exchange the unit to new one.

Is Flash 10.3.181.34 a 64-bit version?

I am running Fedora 14 64 bit version of Linux and I am having a problem with Flash. When I try to look at what should be a Flash item, I get a blank spot. If I right click in there I get the message Movie not loaded and a place to click About Flash 10.3.181.34. If I go there, I get a screen that lists the current version for different OS's. What I have is the current version. Why is the movie not loaded? I have tried to go to the Settings Manager to check my settings but nothing shows up. I believe that if I go to http://www.adobe.com/software/flash/about/ I should get something moving. I get an empty spot. If I right click there, I get the same messages - movie not loaded and About Flash. I have tried to clear my cache and reboot. Neither fixes the problem. Help!!!!

There are no 64-bit Flash Players from Adobe released yet. But that does nog have to be an issue for you, you only need to have a 64-bit Flash Player if you have a 64-bit browser. If you do have a 64-bit browser and not a 32-bit browser you could the beta 64-bit player that is currently in beta: http://labs.adobe.com/downloads/flashplayer11.html
The usual warnings to using beta software apply. If you try the beta player and have issues with it make sure you report them in the Flash Player 11 forum or directly in the bugtracker if you are familiar with reporting bugs in a software development environment.

Snow Leopard + Flash 10.3.181.14 Plugin + Freeze

• Mac OS X 10.6.7
• MacPro 12GB RAM
• Latest Safari Build
• Flash Plugin (System Preferences Pane) 10.3.181.14
• Adobe Flash CS4 10.0.2
• Coda 1.7
While all Flash objects in all of my browsers (Safari, Chrome, FF, etc) work perfectly, when using Coda to view the websites (which runs using Safari's webkit engine and resources), certain Flash objects cause the Coda program to freeze, and then Coda needs to be Force Quitted.
This was not an issue with the same version of Coda on Leopard, 10.5.x. I also noticed 10.5.x does not use a Flash plugin preference pane. 10.5 has Flash version 10.2. No such problems there.
Visually, every few times the Flash object in question would load, but it would have visual artifacts and random lines, rather than the actual content. It looks very similar to an overclocked, overheated video card screen. See attached screenshot from Coda, vs. Safari. After the glitch happens, the next load of the SWF file causes a program freeze.
Coda's Browser:
Correct View (Safari):
I was able to view the error log in Coda, and came up with this:
6/2/11 2:57:02 PM [0x0-0x106106].com.panic.Coda[3081] Thu Jun 2 14:57:02 mac.domain.com Coda[3081] <Error>: CGBitmapContextCreate: unsupported parameter combination: 8 integer bits/component; 32 bits/pixel; 3-component color space; kCGImageAlphaPremultipliedFirst; 536612288 bytes/row.
6/2/11 2:57:02 PM Coda[3081] NSExceptionHandler has recorded the following exception:
NSUncaughtSystemExceptionException -- Uncaught system exception: signal 10
Stack trace: 0x951d6378 0x90a8c45b 0xffffffff 0x92895f60 0x92896897 0x9261bf05 0x9261b2d0 0x9261af18 0x924fdc35 0x93cf782a 0x93cf64c8 0x924fd79a 0x93cf67fd 0x93cf67fd 0x93cf67fd 0x93cf67fd 0x93cf67fd 0x93cf49e7 0x93cf595c 0x93cf595c 0x93cf595c 0x93cf595c 0x93cf595c 0x93cf595c 0x93cf595c 0x93cf595c 0x93cf595c 0x93cf455b 0x93cf0ea2 0x93c51a57 0x93c1ad40 0x93c4c28a 0x9091de02 0x908d9d8d 0x908d9464 0x908d9291 0x90123e04 0x90123bb9 0x90123a3e 0x93c2278d 0x93c21fce 0x93be4247 0x93bdc2d9 0x2a82 0x29a9 0x2
6/2/11 2:57:03 PM Coda[3081] A possible error occurred: (NSUncaughtSystemExceptionException) Uncaught system exception: signal 10
NSExceptionHandlerUncaughtSignalHandler (in ExceptionHandling) + 65
_sigtramp (in libSystem.B.dylib) + 43
0xffffffff
CAOpenGLLayerDraw(CAOpenGLLayer*, double, CVTimeStamp const*, unsigned int) (in QuartzCore) + 1026
-[CAOpenGLLayer _display] (in QuartzCore) + 512
CALayerDisplayIfNeeded (in QuartzCore) + 621
CA::Context::commit_transaction(CA::Transaction*) (in QuartzCore) + 362
CA::Transaction::commit() (in QuartzCore) + 316
-[WebHTMLView drawRect:] (in WebKit) + 629
-[NSView _drawRect:clip:] (in AppKit) + 3510
-[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] (in AppKit) + 1600
-[WebHTMLView(WebPrivate) _recursiveDisplayAllDirtyWithLockFocus:visRect:] (in WebKit) + 266
-[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] (in AppKit) + 2421
-[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] (in AppKit) + 2421
-[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] (in AppKit) + 2421
-[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] (in AppKit) + 2421
-[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] (in AppKit) + 2421
-[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] (in AppKit) + 711
-[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] (in AppKit) + 4668
-[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] (in AppKit) + 4668
-[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] (in AppKit) + 4668
-[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] (in AppKit) + 4668
-[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] (in AppKit) + 4668
-[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] (in AppKit) + 4668
-[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] (in AppKit) + 4668
-[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] (in AppKit) + 4668
-[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] (in AppKit) + 4668
-[NSThemeFrame _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] (in AppKit) + 265
-[NSView _displayRectIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:] (in AppKit) + 3309
-[NSView displayIfNeeded] (in AppKit) + 818
-[NSWindow displayIfNeeded] (in AppKit) + 204
_handleWindowNeedsDisplay (in AppKit) + 696
__CFRunLoopDoObservers (in CoreFoundation) + 1186
__CFRunLoopRun (in CoreFoundation) + 557
CFRunLoopRunSpecific (in CoreFoundation) + 452
CFRunLoopRunInMode (in CoreFoundation) + 97
RunCurrentEventLoopInMode (in HIToolbox) + 392
ReceiveNextEventCommon (in HIToolbox) + 354
BlockUntilNextEventMatchingListInMode (in HIToolbox) + 81
_DPSNextEvent (in AppKit) + 847
-[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] (in AppKit) + 156
-[NSApplication run] (in AppKit) + 821
NSApplicationMain (in AppKit) + 574
_start (in Coda) + 216
start (in Coda) + 41
0x00000002 (in Coda)
However, I could not find any issues in the console raised directly by Flash or Adobe. I'll be cross posting this in the Coda user support group.
What's going on here? Why would this only happen through Coda, which is basically using Safari's engine?

I should add that the SWF object in question here is being loaded dynamically through a lightbox style jQuery plugin. The SWF itself is using SWFobject2 to load. Finally, the SWF object's parent containers are often switched between display: none and display: block.
Again, only the built-in Coda browser has issue with all of this.

Local A.-Group A. Differences TType 181 "Clearing Down Paymt" CIP aseets

Hello,
In Assets under construction, in the Asset values I have differences between Local Area and Group Area for TType 181 "Clearing of down payment from current fiscal year". The amount in the Local Area is different and bigger. If I go inside the posting I see like 3 posting (amount 493552,62) for TType "Clearing of down payment"
001 25       11278       FOCKE AND CO (GMBH)       00 00 00        117.144,36
002 39A    11278       FOCKE AND CO (GMBH ) P4 00 00 00        117.144,36-
003 40       245385     RO Output VAT payabl      P4 00 00 00         22.257,43
004 50       162385     RO Input VAT on purc       P4 00 00 00         22.257,43-
005 75       1660300    007500000069 0000            00 00 00        117.144,36-
006 40       1660230    FDwnpmtClrngccntdj0          00 00 00        117.144,36
In the Group Area the amount is 173030,65 for TType 181"Clearing of down payment"
001 40       166023     FAdownpmntClrngAccnt         00 00 00        173.030,65
002 50       166030     DownpaymntFixedAsset         00 00 00        173.030,65-
Why I have this differences for the same Co.Code with CIP assets?
B.Regards
Francisco

Thanks Sriniva,
But I think this is not customizing or I can´t find the reason, because for this Company, (Romania)
Depreciation Area currency:
01     Local area - ROL     RON     NewRomanianLeu     0
30     Group area - ROL     RON     NewRomanianLeu     1 (refer. depreciat. area that provides values)
And related the currency company 1st Local is RON and 2nd is USD
-->I see the same values (amount) in Local Area and Group Area, except for the TTYPE 181 "Clearing of down payment from current fiscal year" and the document generated I that I sent before with the 6 positions , instead 2 positions.....
Regards
Francisco

Adobe Flash Player 10.3.181.34 - Not Working?

Hey,
So I have windows 7, 64-bit operating system and I use Mozilla Firefox (32-bit) as my browser. I have yet to try other browsers and I have downloaded the 32-bit version for the use of the flash player. But almost any website that requires flash, doesn't work (which is a large portion of the internet). I'm at a loss, I've reinstalled it, re-started my computer, re-installed firefox,
Any ideas?
Thanks

What Firefox version do you use?
FP 10.3.181.34 works fine for me on Firfox 3.6.18 and 5.0
Can you see the Flash animation at http://www.adobe.com/software/flash/about/ ?
Regarding your problem, can you be more specific what you mean by "not working" - what are the exact symptoms?
Finally, what files do you have in C:\Windows\syswow64\Macromed\Flash?

Problem with 10.3.181.14 and FF browser problems

I just installed 10.3.181.14 and I immediatedly encountered a problem with FF 3.6.17 cache. When I run CCleaner I never had a problem until now. It keeps saying the FF is still open and it's not. When I figured it out that it had something to do with FP it figured I would uninstall FP from the control panel and try again. I was able to uninstall FP for IE, but, was, not able to uninstall FP fpr FF. It said FF browser was open and it wasn't. I finally resorted to doing a system point restore, going back one day, and now everything works as it should using FP 10.2.159.1 Does anybody have any insight into this problem?

Thanks for the reply. I did, in fact, check the task manager, and I didn't see it running. There was no FF tab in the task bar either. While I might understand the problem trying to uninstall FP I don't get it with running CCleaner which is neither an installer or uninstaller. As soon as I went back to the previous version of FP everything was working as it should. I can only assume it had something to do with the new version FP,what, I don't have a clue. By-the-way, I'm running Vista OS.

How can I see the quantity of battery cycles on Satellite U200-181?

I have Satellite U200-181, and I use it hard, every. I want to be ready replace my battery, when it will have 400 cycles.
How can I see the quantity of battery cycles on my laptop?

You must not see this. You will see that capacity of the battery drops down and will be empty after short time. Nobody say that you will be able to use battery 400 cycles only. Maybe you will be lucky and the battery will have longer life time.
My Tecra M1 is about 4 years old and still working with original battery.
Your question is pretty unusual and I am really interested about further comments.

Purchase Requisitions stuck in CIf with message 181

Hi All,
We have purchase requisitions created in APO on transportation lanes based on external procurement relationships. We have noticed that the requisitions are created in ECC but get stuck on their way back to APO. They appear in /sapapo/ccr with message 181.
Any ideas where we could be going wrong?
Regards,
Zeeshan.

you need to push this Orders in APO through CCR .
some times schedule line are not created/updated in APO so we need to push it through CCR report.
On CCR report screen select all the PO and click on arrow button send to APO .
Than click on iteration icon .
this will push all PO to APO and will not appear in next CCR run.
If it didn't help please check OSS note :
Note 1152934 - DELTAREPORT:confirmation-error 181 for after return delivery
Note 1131469 - DELTAREPORT: unjustified error 181/183 for confirmation

Problem about using xmlbean as return parameter in workshop 9.2 jsr-181 WS

Hi
I met a problem with the jsr-181 web service's return parameters in workshop 9.2.
I wrote a web service which will return a jax-rpc-style javabean as return parameter. This javabean contained three xmlbean objects fields. So, the client can get those xmlbean objects when invoking the web service.
But I got the error like the following:
A java class "..." is being used as a parameter or return type that contains a property of field that is an xmlbean "...", this not allowed.
Maybe workshop 9.2 does not support xmlbean object as the returned javabean's field. But why, i can use that in the workshop 8.1. why workshop 9.2 does not support them.
And how can i do if the client want to get the three xmlbean objects when invoking the web service.
Thanks,
Xueh

Hi Xueh
I got it confirmed from engineering that we do NOT support any use of XmlBeans in a Pojo complex type.
The workaround is to create a top-level xmlbean type that references the other xmlbean types.
Thanks
Vimala
P.S: There seems to be some complexities involved in mapping a JAX RPC type (POJO) to a XMLBean Type. But we do have a internal bug that is tracking this issue.

How to reset password on Satellite U200-181?

Greetings!
Sorry for my English.
I have notebook Toshiba Satellite U200-181 and all documents from it (check, warranty).
When the computer starts, it demands to enter the BIOS password... I called in the service center in Russia, but they told me then they have not any Response Codes
I have PC Serial No. and Challenge Code... What I need doing now? I dont want pay about 70$ for reset password... please help :)
Best Regards, Sergey

Hello Sergey
Please do not be mad on me but you do not understand how it works. To reset BIOS password Toshiba control center needs code given by your notebook model. After short time they send one new code back and after entering this code the BIOS password will be deleted.
Just authorized service provider in your country can contact Toshiba control center and just service will get the information back. With short words: private person like you have no chance to delete BIOS password. I hope you understand it why. If not let me know I will explain you.
Sorry but you must contact service.

Can I insert HDD 160GB in Satellite U200-181

Dear Friends!
Whether I can insert HDD 160 Gb in laptop Toshiba U200-181?
Version BIOS 3.40
Thanks!

Hi
Hmmm, the snipe's comment is not 100% right.
If the HDD size is not supported the BIOS will not recognize the HDD!!!
I think you could use an HD up to 120GB but I'm not sure about the bigger sizes.
You should really test it before you will purchase one.

Satellite U200-181 - How to add extra RAM?

Hi
I've enjoyed my U200-181 very much, but would like to have some extra RAM in addition to 512 Mb installed by default. How can I do that?
How many SO-DIMM slots available? Are there any disassembly instructions?
Thanks in advance

changing the memory is very easy.
1. pull off the black strip above the keyboard (it just snaps in place)
2. remove the 2 screws
3. pivot keyboard forward being careful not to damage keyboard cable
4. remove 2 screws on big metal plate on the right.
5. remove plate to expose 2 x ddr2 200 pin sodimm slots.

10.3.181.34 vs 10.3.181.35

Similar Messages

Maybe you are looking for