10.3.3 devices with same GUID

I installed the 10.3.3 agent on several devices this morning but only the latest device installed shows up in ZCC. If I go back and refresh a device installed earlier then THAT device appears in ZCC and the other device is gone. In services-messages.log it appears that the devices are re-registering with the same GUID. Very strange. I can't trust what I see in ZCC now. Is this a known bug?
I installed the agent from http://<zcmserver>/zenworks-setup with no registration key. All are Windows 7 64 bit with no SP1.

i also had the same problem but with the below fix all is ok now. just to note i am on zenworks 11.1 so thumbs up there :-).
cheers etotman
barneyb
Originally Posted by etotman
In my case "zac fsg -d" did not make any perceptible changes on any computer. Here's what I did to fix the problem:
zac unr -f (force local unreg)
C:\Program Files\Novell\ZENworks\bin\preboot\ziswin (delete GUID and device ID, save)
del C:\Program Files\Novell\ZENworks\conf\deviceguid
reboot
re-register: zac reg <server_address>

Similar Messages

Set up family on several devices with same apple id

I have successfully started Family from my iphone and got my kids and wife connected. But when trying to add my ipad with same id as I use on my iphone I cannot succeed. It states that an account can only be connected to one family at a time. How is the procedure for this?

I could have solved it by inviting myself.

Trouble using facetime on another device with same apple id

Hi
I am having trouble using facetime with my wife. I have an iPad 2 and she has an IPhone 4S. When we try to facetime, we are able to connect for a few seconds and then it drops off. We are then unable to reconnect. We both have the same apple Id and e-mail address although I am trying to contact her via her mobile number. Any suggestions would be grateful received.

Get an email address (free gmail.com) to use on the iPad.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

How do I stop my texts and pictures from going to other devices with same Apple ID

I share my Apple ID with my son on his Ipad and I phone. how do I stop my photos and messages from automatically going to his devices.

It should be iMessages which are going from device to device, you can turn this off in recipient device. The same sort of thing for Photos, however on your phone/ipad you can turn off 'Photo Stream" which will stop the sending to other devices. You can do this under Settings>Photos & Camera.
Regards,
Steve

IOS 8 double tap allows other device with same Apple login to see who other is messaging

I have two iPhones with the same AppleID account. The iMessaging for each device is set to only send or receive message and FaceTime from the phone number for each device to keep them separate. If device A is in a text message and the home button on device B is double tapped a notification will be visible to show device A is in a text message. Device B can then tap this notification and the person being text in Device A becomes available and a new message to that person is then opened. Not acceptable. I have tried to unlink the two devices in any way I now how. No luck. The screenshot below is what Device B sees if Device A is composing a message.

That's just the way it works, since you're using the same Apple ID on both. If you have a problem with that, go to http://apple.com/feedback/iphone.html.

Can 2 ios devices with same apple id not share stuff?

Hi folks,
A bit of a long story but we've ended up with my wife's iphone and my son's ipad using the same apple id.
any app i buy for my son pops up on my wife's phone.
Can I turn off sharing? I'd like the calendar and other stuff to be seperate too.
Neither of them need any sharing to other devices either.
Cheers

Use a different Apple ID for each person. On each device, under Settings in the following areas, make sure that each device is only using the Apple ID assigned to that person:
iCloud (If you share an Apple ID here, your Contacts, Calendars, Reminders and PhotoStream photos will be shared, as well as using up the same free 5G of backup space. And it's 5GB per Apple ID, not per device)
Messages (If you share an Apple ID here, you'll receive each others iMessages)
FaceTime (If you share an Apple ID here, you'll receive each others FaceTime calls)
GameCenter (If you share an Apple ID here, then certain games/apps will share the same progress)
iTunes & App Store (If you share an Apple ID here, you'll have access to the same iTunes & App store purchases. This is the one place where it's not really a problem, since many families don't want to have to make multiple purchases of the same iTunes music or paid apps. And you can prevent the new content from automatically downloading to other devices by disabling that feature in Settings > iTunes & App Store.)

Can I Facetime between 2 devices with same Apple ID?

If I get an iPad 2 to take with me on the road, can I Facetime with my family (who will be at home on the iMac), even though both devices will be set up with the same Apple ID?

Try it and find out.

Three Devices with Same MAC

I have three new SiriusXM devices that were giving me trouble a couple weeks ago. Turns out the root of the problem is that all three have the same MAC address. Amazing, but true. 76c2.5e30.1599.
I have a feeling I've given their engineering/manufacturing staff a big headache by discovering this, as they likely have a warehouse full of these things, all with the same MAC. Not my problem, but it would be fun to watch them discover what's going on. haha
But I digress...I don't think they have a solution yet, but I'd like to use the devices anyway, if possible. They are Internet-based XMSirius radios. They all worked when I connected them to the same switch, but the log was getting flushed several times a day with MAC flapping errors every few seconds. We tried separate vlans, but that doesn't work.
Any ideas on how to do something that we shouldn't need to do? :)
-John

Hi John,
Is your question how to do away with the mac flap notifications. The switch is giving you its best possible help by telling you that there is a problem. But if you still want to get rid of it, you may try the following
(config)#no mac address-table notification mac-move
But again as a best practice i don't recommed to continue use these devices since it can some time cause issues in your network, since it keeps the cpu busy.
Hope this helps and rate my post if it is found to be useful.
Thanks,
Madhu.

Facetime on multiple devices with same Apple ID?

Hi...we have an iPad 1, iPhone 4S, iPod touch from 2010 and new iPod Touch yesterday.
I have not set up the new iPod Touch yet...but all the other devices are using the same Apple ID so I can buy apps and allow all my devices to get the apps installed for free. Great.
How can I set up my new iPod Touch to use the same Apple ID and also do Facetime? If I use the same Apple ID I would think that my other devices would start to ring when I try to Facetime. No?
If you know how to do this, can you please reply and give exact steps?
Thanks so much in advance.
-Eric

@dutra - Your suggestion worked like a charm. I have two options setup under my daughter's name in Facetime: Touch and iPAd. All I need to do is choose which I want to call. Easy-peasy.
@jeffreyfromorillia - This advice may be too late... But, register each device using your ID, as you should. Once this is complete do the following:
1 - Go to SETTINGS on device A
2 - Choose FACETIME
      - here you'll see your ID in the account field -- ignore it/leave it there.
     - below you'll see the email field, enter your daughter's email addy (you don't have to worry about the "+XXX"      unless she has more than once device because it applies only to the multiple device scenario)
     - IF you have used your email addy in the email field, click on Add Another Email and enter daughter's addy      here, then go back and choose your email addy and click remove
You are good to go. Repeat same steps for your stepdaughter's device.
If either girl has multiple devices you want to Facetime, follow steps 1 and 2, and in the email field click on Add Another Email and enter - [email protected] - then go back and delete orignal email entered. Do same for second device - [email protected], remembering to delete orginal email here, too.
On your device go to Facetime and edit contact - it prolly shows HOME / WORK / OTHER, click on it and choose CUSTOM, name it iPod, then enter the NEW email "[email protected]" and do same for second device, customizing the field to read iPad, or whatever you choose... Now you should have two options to choose from for contacting Girl 1. Repeat for Girl 2.
Hope this works for you, it worked out splendidly for me.
Cheers.

Multiple Devices with Same ID but Different Contacts

My family and I all use one apple id on one computer. I have 5 kids so they all wish to share music and such on their multiple devices.
But, they wish to keep their contacts separate.
Is there an easy way to do this?
I have heard of having several iClouds, but I wish to not do this if possible.
Thanks!

If you are comfortable still using the same AppleID, you can always purchase more storage at a very low cost. Just go to settings>icloud>storage & backup>and change storage plan. You can upgrade for as little as $10. Hope this helps!

Replaced network device with same ip - cannot access ssh/http

Hello-
I replaced a network equalizer and used the same ip.
<www> - <firewall> -<netequalizer>-<cisco core>-<lan>
I can see this online and we are passing traffic. Yet cannot access ssh or http. I have been troubleshooting with netequalizer but figure i come here. I am thinking this may be an arp issue on the cisco core? Any thoughts?
thanks

While it might be possible that it is an arp issue on the core I think it is not so likely. Can the core ping the netequalizer? If the core can ping then it almost certainly is not an issue with arp.
My guess is that there was something in the configuration of the previous netequalizer then enables management by SSH and HTTP that was not done in the configuration of the replacement.
HTH
Rick

Two devices with same Apple ID

Hi there,
Unfortunately we are not a very technical fami;y and by mistake, or lack of knowledge I set up my son's ipnone using my husbands Apple ID. I now realise that I have to create a seperate I.D. for my son but how do I delete or disconnect him from my husbands Apple I.D. account without erasing all of my husbands stored data?
Thanks

Hi,
On your son's iPhone you just need to remove the Apple ID in the places the iPhone is using it.
Let's start with the iPhone > Settings > iMessages.
Start with de-selecting the Apple ID as one of the Send and Receive options
Then remove the Apple ID itself.
Place the iPhone in in Airplane Mode for a few Minutes. This breaks contacts with at least the iMessages server in this case.
Now turn to Settings > iCloud.
Again turn off all the settings that it may be syncing with.
then remove the Apple ID here.
You may have to check Settings Mail separately to make sure the email is not still listed for that app.
Again check the iTunes app, FaceTime and the Game Center at least.
Then you can Add the new Apple ID that you or your son gets.
You will be extracting one items from the Sync processes fro the most part and the "registrations" for FaceTime and the iMessages part of the Messages app.
It will not effect the data on your husband's Mac or any info he has in iCloud On line.
9:18 pm Friday; March 28, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Reach different devices with same website

Hi,
I have developed a website using spring and hibernate mostly. I now would like to also make it accessible from mobile device. Is there maybe a (framework) that can change the response my website is sending into content accessible by the mobile device.
This thing came to my mind because usually developers develop a website for the personal computer and another for the mobile device. However today there are also PDA�s out there! So would they need to develop another website!
Also usually a company has a domain such as �www.company.com� Now is there a way how to know what type of browser is trying to access the domain, and if it is a browser on a mobile then you give him the mobile version else the pc version, and so on!!
Web development for mobile is still new to me and I only find a document from w3c schools on the internet talking on such a thing (standards mostly). However I am mostly interested in technology to help me do this out.
Thanks and Regards,
Sim085

Hi i'm not really sure tht this what u are looking for however....
request.getHeader("User-Agent")
This method would return the client agent (eg: IE,mozilla,netscape,WML client...) of the client....
NOTE: If U r using Legacy clients like an APPLET,Swing,MIDLET ..... we should take an initiative to add in a requestproperty.....
But i think this should help u by certain means....
However i would like to add in a point here....
It wud be a better idea if U can go wid a neutral architecture.... where the output of your View layer is a text/xml reponse.... & Your presentation layer should take care of handling specific clients....
REGARDS,
RaHuL

Log file shows all devices with same MAC on EA6500

Just thought it was rather odd. I'm running firmware version 1.1.28.14856 on EA6500 series.
Thanks

The 6500 has numerous issues that is one of them, cisco knows of the issues but really has done nothing to fix them. I would stay far far away from the 6500 it really is broke right out of the box. If you search the forums here and other reviews on the web of the 6500 it's not pretty. The router was rushed to market without the propper testing and cisco decided to make you the customer test it for them. Good Luck with the 6500. And if the moderators in here dont like me telling the truth than simply delete my account here dont matter none to me. Cisco knows im right and so do many others.

Multiple devices with the same GUID

Hi,
According to the Zenworks Command line utilities reference https://www.novell.com/documentation...a/bb15p2z.html
There exists an option to register a device with a new GUID by doing the following...
register (reg) [-g] [-k <key>] [-u <username> -p <password] <ZENworks Server addressort>
Registers the device in a Management Zone.
You can use the following options:
g - Lets you create a new device object with a new GUID and password for the device if you have multiple devices with the same GUID. When you register a device by using this switch, all the associations (policies and bundles) assigned to the original device object are removed. You cannot use this option to create a new GUID for a Primary Server or a Satellite device. The local user must have Local Administrator rights to use this option.
I would like to know if it is possible to have such a command line option for the agent installation. So built into the agent installer, a command line option to force the agent to register with a new GUID.
We are having CONTINUOUS problems with the above scenario. When we move devices from one computer lab to another and re-image the device, Zenworks keps trying to assign the same GUID to the device and this mixes up our Dynamic Workstation groups, which then affect the applicable policies to each device.
I would like to know if there is an option to tell the installer to stop remembering the GUID and simply register the device with a new guid on agent installation.
This way we can build that into the post imaging scripts which install the zenworks agent.

Hi Craig,
OK, I've had a look at the ZCM Reconcile rules and run a few tests to see if it is possible to get the machines not to reconcile (use a new GUID after imaging).
As I have explained before, sometimes this result is desired in our case especially when we move machines around from lab to lab.
So far, no matter what configuration I use, I cannot get Zenworks to generate a new GUID for a device that is getting re-imaged (without doing so only after the fact by unregistering the machine and reregistering the machine via the zac und and zac reg -g).
We use dynamic workstation groups to assign policies and bundles to machines so reconciling the devices is not necessary most of the time. We need an option to tell the machine to register with a new GUID on installation of the agent. Surely such an option can be built into the agent installer?
The options in the ZCM config management "reconcile settings" I tested with are:
Serial Number - Unticked/Unselected
Mac Address - Unticked/Unselected
Machine Name - Unticked/Unselected
Enable Differentiation - Unticked/Unselected
I then also tested:
Serial Number - Unticked/Unselected
Mac Address - Unticked/Unselected
Machine Name - Ticked/Selected
Enable Differentation - Ticked/Selected
and also:
Serial Number - Unticked/Unselected
Mac Address - Unticked/Unselected
Machine Name - Ticked/Selected
Enable Differentation - Unticked/Unselected
With all three different configurations, I re-imaged the same machine, which renames the machine via the first post imaging installation script to match the DNS name. Thereafter the Zenworks agent gets installed, which then renames the machine back to what it was registered into the Zenworks database with on first installation.
We need a method of telling Zenworks NOT to reconcile when we want it to. It should not reconcile every time and thereby rename the machine netBIOS name.
Is there any way to achieve this?
Originally Posted by CRAIGDWILSON
Quite Simple,
Let's say a HDD Dies and you replace it.
All you need to do is bring down an image and the machine will come back as it was with all the same WS and Device associations.
The same thing could apply if bringing in new Hardware.
If a new computer were to replace an old computer but the name stayed the same, everything could be automatic depending on the rules setup.
It is all a matter of how you tell ZCM to reconcile devices.
The Help in the ZCC under these items should explain how it works so you can setup your rules to meet your use cases.

10.3.3 devices with same GUID

Similar Messages

Maybe you are looking for