10.4.1 update does not start.

Hi, everybody.
I've just checked for some possible updates on my iTunes (running on Windows).
But if I click the proper buttons to start the download (as I'm always used to), the pop-up just minimizes and appears once again after a few seconds; so I am supposed to click once again the same button, but the process does not start and the pop-up appears again.
Is there anyone who might help me please?
Thanks.

I have had problems with MS Word after two other OS updates (including 10.4.6). This may not work for you; however, it did for me (and it was what MS advised me for my font corruption indication problem): Re-boot holding the shift key down (to perform a Safe Boot). Hold it down until the red "Safe Boot" nomenclature is seen on the log in screen. Starting up in a Safe Boot clears the font cache automatically. Then, just re-boot normally. This might work. If not, no gain, no loss. Hope it helps you.
Barry
PowerBook G4 & PowerMac G4 Mac OS X (10.4.6)

Similar Messages

Smartwatch 2 not working (update does not start, SW is stuck)

Hello. I just bought SW2. I turned on NFC on my phone and placed SW2 on the back of my phone. Phone and SW2 made connection. SmartConnect was installed on my phone BUT then it wants me to install SW2 app (release date 13.12.2013). OK it installs the SW2 app and then progress bar appears on my SW2 and thats it. No progress at all. Phone just saying "downloading updates to SW2" but never starts. I waited two hours but nothing happend.
I try to describe averything I have tried in detail, hoping so that someone can help me.
I tried to use Sony Mobile Update service. I connected SW2 to my PC and Sony Mobile update service said that there is update available. So I do the update, SW2 restarts BUT then all starts over again. SW2 app is still trying to download updates but nothing happens. I tried to uninstall everything and reinstalling SmartConnect and SW2 app but that did not help.
Then I used someone elses phone. I connected SW2 with other phone than mine, pairing worked, SW2 app managed to install the updates (this is where i got stuck with my phone) on SW2 and everything worked. Then I did reset on the SW2 and paired with my phone again. Pairing seems to work. Phone says that SW2 is connected BUT nothing really works. No notifications, facebook app does not show anything. Smart Music Player does not work, Smart Camera does not work. When I click on any app that needs to interact with my phone, a "waiting bar" appears for a few seconds and then nothing, silence. Whe I turn off the bluetooth on my phone, the SW2 app says that SW is disconnected and then I trun on the bluetooth, then it connects again. SW2 and phone seems to be connected but it seems that no information is moving between them. And then there is the battery drain. When SW2 and phone are "connected", the battery on my phone lasts about 3 hours max.
So I tried the Sony Mobile Update service again. Suprisingly. update was available, even tough I did the update befoe AND with my friends phone. So i do the update again and now I am back where I started - my SW2 and phone are "connected" and SW2 app wants to install updates to SW2 but the downloading process does not start and I can not use SW2 without it. So I need my friends phone again just so that I can use SW2 as a regular watch.
My phone:
LG-P940 (Prada 3.0)
Android 4.0.4 ICS
I have heard that people with LG phones are experiencing the same issue...

It seems that we are suffering from the same problem I also have an LG phone aswell.

Updater does not start download automatically

I have a Win XP Pro PC. I go to the updater down load page and log in. The page says the download will start automatically, but it does not.
Please help.
Thanks in advance.

Do you see a yellow bar right above the website in IE saying that it has blocked the download? Can you click it and go to download the file?
These are pics from Microsoft's website. Is this what is happening?...
See this for more information...
http://www.microsoft.com/windowsxp/sp2/ieoeoverview.mspx
btabz

System Update does not start

Windows 7 x64. I launched System Update V4 from Solution Center. It automatically updated to Version 5.2. System Update 5.2 seems to start (the Tvsukernal.exe is showing active in Task Manager) and the icon is on the task bar, but no System Update window ever appears. I have uninstalled and reinstalled multiple times. I would like to update my system, but how?

But how exactlly does one accomplish deleting SUService between uninstall of System Update 4 and install of System Update 5? When I launch System Update V4 it immediately downloads and starts installing V5. So, while the installer was running I deleted the SUService. Still same problem. I uninstalled System Update completely, all files removed including SUService. Reinstalled with System Update 5.02. Still same problem. System Update seems to launch, appears on the task bar, but its window will not open.
Here is the content of the log file created after starting System Update:
[Lenovo System Update build: 2013-4-11 5.02.0011] 6/5/2013 8:50:42 AM
Info 2013-06-05 , 08:50:42 at Tvsu.Environment.EnvironmentManager..ctor() Message: Starting Environment Manager...
Info 2013-06-05 , 08:50:42 at Tvsu.Nls.NlsResources..ctor() Message: Starting the instance of NLS@Runtime
Info 2013-06-05 , 08:50:42 at Tvsu.Nls.NlsResources..ctor() Message: The active language is: EN The default language is: EN The OS language is: EN The language loaded type is: OS
Info 2013-06-05 , 08:50:42 at Tvsu.Commonscheduler.SchedulerManager.Save() Message: Scheduler Manager Starts...
Info 2013-06-05 , 08:50:42 at Tvsu.Commonscheduler.SchedulerManager.Save() Message: Obtaining information from the Enviroment Manager...
Info 2013-06-05 , 08:50:42 at Tvsu.Commonscheduler.SchedulerManager.Save() Message: Validating Starts...
Info 2013-06-05 , 08:50:42 at Tvsu.Commonscheduler.SchedulerManager.Save() Message: Validating Ends...
Info 2013-06-05 , 08:50:42 at Tvsu.Commonscheduler.SchedulerManager.Save() Message: Sending Values to the SchedulerParser...
Info 2013-06-05 , 08:50:42 at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath) Message: Scheduler Parser - Receiving Values from the SchedulerManager
Info 2013-06-05 , 08:50:42 at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath) Message: Scheduler Parser - Starting Validation Process!
Info 2013-06-05 , 08:50:42 at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath) Message: Scheduler Parser - All validations have been processed!
Info 2013-06-05 , 08:50:42 at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath) Message: Scheduler Parser - Writting to the registry...
Info 2013-06-05 , 08:50:42 at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath) Message: Scheduler Parser - All values were saved on the Registry!
Info 2013-06-05 , 08:50:42 at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath) Message: Scheduler Parser - Reloading Scheduler
Info 2013-06-05 , 08:50:42 at Tvt.Commonscheduler.SchedulerParser.SetValues(String v_ScheduleMode, String v_ScheduleDayOfTheMonth, String v_ScheduleDayOfTheWeek, String v_ScheduleHour, String v_ScheduleMinute, String scheduleSecond, String v_NumMinutes, String v_wakeFromSuspendHibernate, String v_Pre, String v_PreParameters, String v_PreShow, String v_Post, String v_PostParameters, String v_PostShow, String v_Task, String v_TaskParameter, String v_TaskShow, String v_CPUPriority, String v_minDaysBetweenExecution, String v_lastRunTimeHigh, String v_lastRunTimeLow, String v_nextRunTimeHigh, String v_nextRunTimeLow, String v_preRunAsUser, String v_runAsUser, String v_postRunAsUser, String v_schedulerAbility, String v_schedulerPath) Message: Scheduler Parser - The Scheduler was reloaded
Info 2013-06-05 , 08:50:42 at Tvsu.Commonscheduler.SchedulerManager.Save() Message: All values sent to SchedulerParser...
Info 2013-06-05 , 08:50:42 at Tvsu.Commonscheduler.SchedulerManager.Save() Message: Scheduler Manager ends...
Severe 2013-06-05 , 08:50:42 at Tvsu.Sdk.SuSdk.StartApplication() Message: Application runs with the framework: 2.0.50727.5466
Info 2013-06-05 , 08:50:42 at Tvsu.Engine.DataBase.InitializeDataBase() Message: Initializing the DataBase from file: updates.ser
Info 2013-06-05 , 08:50:42 at Tvsu.Sdk.SuSdk.StartApplication() Message: Starting the Application
Info 2013-06-05 , 08:50:42 at Tvsukernel.Logic.GUIController.StartGUI(Boolean showsplash) Message: Starting GUI...
Info 2013-06-05 , 08:50:42 at Tvsukernel.Logic.GUIController.StartGUI(Boolean showsplash) Message: MainFrame created successfully
Info 2013-06-05 , 08:50:42 at Tvsukernel.Logic.GUIController.StartGUI(Boolean showsplash) Message: GUI -- Welcome screen
Info 2013-06-05 , 08:50:42 at Tvsukernel.Logic.GUIController.BackToMain() Message: Setting Welcome screen...
Info 2013-06-05 , 08:50:42 at Tvsukernel.FlowScreens.MainFrame.SetScreen(String screen, RoutedEventHandler[] eh) Message: Loading Welcome screen on Action pane.
Please help!
(Thanks in advance)

Adobe reader updater does not start

Hi Adobe community,
I am not sure how to resolve this issue. I've tried downloading the reader again hoping that it will over ride this but as usual ( those savvy with this kind of things will already know) it will not allow stating that there is an update in progress and to let the last update finish before installing the updates that I wanted. The updates in question are Adobe (to over ride this cycle) and also the Windows updates.
It has been weeks that this has been happened but as there seem to be no major impact on my computer usage I felt that it is alright to leave it as it is. But I recently found out that Windows update do contain security updates that are important so I am here to try to solve this issue. I have left the updater overnight but it just stays like it is.
So this is why I am here, I hope you guys/gals can help me out. I will attach a screen shot of the 'offending' offender and hope you guys can suggest a simple way to resolve this. And also I cannot shut down my computer.
Thanks a lot!
thatsmelah

Hi Pat,
Thanks for the help!
I have tried the installer now and at restart both no go.
And then the patch I get this:
And finally the requested information:
Let me know if this is an issue that can be a simple fix, if not I may have to re- install my OS. Which I dread as I do not know how to go about it.
Thanks
thatsmelah

Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.

Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.
''Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.10
BuildID: 20100914125854
CrashTime: 1290192405
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1287124738
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 422
StartupTime: 1290192405
Theme: classic/1.0
Throttleable: 1
Vendor: Mozilla
Version: 3.6.10
This report also contains technical information about the state of the application when it crashed.''
Same thing happens when i click restart.
No difference when i run it in Safe mode. And it won't let me create a new profile either. Is there anyway else i can extract my bookmarks? This is driving me crazy!

Did the crash reporter send any crash reports? 
You can see the crash reports in this folder:
"C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Crash Reports"
See: http://kb.mozillazine.org/Breakpad
See also [[Firefox crashes when you open it]]
Create a new profile as a test to check if your current profile is causing the problems. 
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]] 
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" 
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files) 
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox 
If that still causes the same problem then do a clean reinstall and remove the Firefox program folder.
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
See:
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Can not update tiger and safari does not start

Hi everybody,
I have actually two but probably interrelated problems: First, safari does not start and second, I can not update tiger.
It all started a few days ago on my MacBook (Intel). Somehow, Safari produced an error (I only guess that it was Safari because I was downloading a movie clip) and Tiger was frozen. After rebooting, the whole system had problems (e.g., Safari and Skype were not starting). I tried to reinstall and archive mac os x but with no success. The problems were growing actually even worse (e.g., slow) and at some point in time, Tiger was not even starting. Thus, I did a full new installation of 10.4.8 (delete and install). Afterwards, it worked first but after the automatic software update, the system told me that their was an input/output error (???) during the 10.4.10 update. Afterwards, the whole system had again problems (slow and problems with even booting)!! Thus, the software update made it even worse. So, I did again a full installation (delete and install).
I have to update my 10.4.8 system, because I also have iLife08 that needs at least 10.4.9. However, I don't know what to do to avoid again these update problems??
In addition, despite the full installation, Safari is not starting. Thus, there is still some problems but I have now clue where this comes from as it is newly installed?!
Any ideas?? Thanks...
Crobus

Crobus, welcome, since you are starting from scratch with each re-install why not try Kappy's Extended Hard Drive Preparation.
http://discussions.apple.com/thread.jspa?messageID=5203987&#5203987
Do all steps from 1 thru 6, it is by far a more maintenance oriented than an Erase and Install. After the preparation, install OS 10 from your DVD, then download the OS 10.4.10 Combo Updater.
Joe

HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

"UPAD lite?"
I expect that you mean some version of iPad.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

After update 7.1.2 Iphoto does not start

After installing the 7.1.2 update, Iphoto does not start anymore. only the Icon bounce in the dock a few times.
Restoring the previous Iphoto.app in the applications folder resolves it and iphoto works O.K.
when i install the 7.1.2 update it again does not start.
Can someone help me with this??
Roland

You should probably post in the iPhoto discussions:
http://discussions.apple.com/category.jspa?categoryID=143

IPhoto does not start to update after my iMac was updated to OS X Yosemite.

iPhoto has been "paused" after my iMac was updated to OS X Yosemite. iPhoto does not start to update when I click "UPDATE" in App Store "Updates". The circle on the left top corner just keep circling. Do you know how to fix this problem? I cannot download my photos to iPhoto without updating it.

Thank you LarryHN,
I could not follow what you have explained to me as I struggled to find iPhoto 9.6. Anyway, while I was struggling, I managed to update iPhoto somehow. Finally, I can use iPhoto!
Thank you very much for your quick response.
Tama Chan

New Macbook Pro does not start up after updating...HELP!!!

Hi,
My new Macbook Pro does not start up after it got updated. The first time I used it, it was perfect. I updated it and restarted it when it told me to but it doesn't boot. It shows an apple and a spinning circle when it turns on but that's it.
Can somebody please help me?

You should probably post your question in the MacBook Pro discussions:
http://discussions.apple.com/category.jspa?categoryID=190

I updated my iphone 4 to ios 6.1.3 and it does not start now

i updated my iphone 4 to ios 6.1.3 and it does not start now

That message usually means you hacked the phone to unlock it.
When you updated your IOS it locked back up to the original phone carrier.
Only the carrier that the phone is locked to is authorized to unlock it.
Is this the case?

Aperture does not start after iphoto update

Hello,
It seems that recent update to iphoto made Paerture not to start.
At first attempt, Aperture opened the window, but never went into normal and beach ball was over the blank window, no functions worked.
After Force quit, it does not start at all:
From dock it just silently does not start and from Launch pad the error:
"The application "Aperture" can't be opened
-1712"
is displayed.
What could this be and how to make Aperture working again.
This is Mavericks, 2012 MacBook Pro, Hires.
Thanks a lot

Computer reboot solved the issue.
Aperture now sarts normally.

Mac Pro does not start after security update

Just updated my MBP (mid2011, OX ML) with the latest Security Update ; after reboot it does not start. I get the start screen with login and it keeps spinning? Any wisdom here? thx

Hi, Matholy.
Thank you for visiting Apple Support Communities.
Here is a troubleshooting article that I would recommend going through when experiencing this issue.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Cheers,
Jason H.

Satellite A series does not start up after BIOS update

After bios update with downloaded utility my notebook does not start up.
Did this case covered by warranty?

Im not quite sure if this would be covered by warranty. You should contact the ASP in your country for details but I presume its not covered.
PS: Did you try this workaround:
- remove battery, disconnect the AC adaptor
- wait ~ 40min
- connect both devices again and try to power up the notebook

10.4.1 update does not start.

Similar Messages

Maybe you are looking for