10.4.1 update fails on vista 32bit

download 10.4.1 update. unblocked downloaded file. set compatibility mode to run as administrator. itunes 10.4.1 fails to update. any suggestion?

other user on pc got message installation failed before i got back to get message. said they got message failed. available options werre to ignore or abort. kept clicking on ignore and finally go options to repair or remove to appear. chose repair and update completed for 10.4.1 successfully. sorry i didn't get text of failure but there was no error number.

Similar Messages

Itunes 10.5 Install fail (win Vista 32bit)

Hello everyone. I'm really frustrated why i can't complete the new update for itunes. I've had no problems with previous updates/installers. Check the picture below (it's in dutch). What should I do? I uninstalled itunes, maybe that should work for installing the new update but doesn't do nothing. Help?
Translated: There is a problem with this Windows-Installer package. A program that is required for completing the installation cannot be executed. Contact the system support.

What worked for me with Itunes 10.5.2 on an XP machine was to completely uninstall Itunes and all of its components and then reinstall Itunes. Just unistalling Itunes itself did now work. See http://support.apple.com/kb/ht1925

HT2305 I need helping with re-installing Apple Software Update for Windows Vista, please. :)

Hello, I will get my new Ipad 2 32GB on April, so I will have enjoying with Ipad with bringing up my excitement on Ipad. I need re-installing Apple Software Update for Windows Vista 32bit, but I did install iTunes, Safari, and Iphone configuration utility that it did not included Apple Software Update software. Please send me download file of Apple Software Update, immediate. Thanks
I do not certain about Ipad configuration utility, would be working with Iphone configuration utility?
david

I went into checking with Apple Software Update then I clicked Control Panel - "Repair" It was restored to start menu, thank you much thumb up to b noir Big Helping me! David

Vista 32bit, Service Pack 1 fails to install.

I'm consistantly getting an error attempting to install Vista Service Pack 1 from Windows Update. Here's the error code:
Install status: Failed
Code 80070057
All other patches installed fine. This is on a Mac Pro 1,1, 4GB RAM, Boot Camp 3.1. Let me know what additional info you might need to suggest a solution, and thanks. -Gary

A Google search of "Vista installation error code 80070057 " returned many results. Seems that there are many like you. Here is one that I noticed on one of the Windows forums-->
======
+Re: Update for Windows Vista (KB938371) error code 80070057+
+80070057 - ERRORINVALIDPARAMENTER. Third party service which is running in the+
+computer creating the problem. Please do a clean boot and then install the updates.+
+Could even be your anti virus software.+
======
-->>Notice that the word "Parameter" is misspelled. Lol. This probably is a legitimate Windows definition. I've noticed a lot of misspelled words in my Vista Ultimate install....then again maybe just an honest typo from a well meaning Windows user...hope this helps.
pw

Automatic iTunes update fails because of Vista x64?

iTunes update fails via "Apple Software Update" on Vista x64, because the files that were downloaded are x86 and not x64! Is there a fix for this, or do we have to wait till an x64 version of "Apple Software Update" arrives?

As a workaround, you could try downloading the update direct from the Apple website:
Latest iTunes Installer
(The website should automatically detect if you've got an x64, and download the 64-bit Vista installer. It will be called "itunes64setup.exe".)

Error when installing itunes version 9 on Windows Vista 32bit

When trying to install itunes version 9 an error has come up before the installation is complete.
The error reads -
An error occurred during the installation of assembly
'microsoft Vo80.CRT,version = "8.0.50727.4053,"type="wn32",publickey token=1fc8b3b9ale18e3b" process or architecture="x86"
HRESULT.0x800736133
Can anyone help me - I am using windows vista 32bit. Have tried turing off ALL security and reinstalling as someone else suggested previously. But still have had no luck
Thanks

Thanks Emma!
Ox800736B3
Not a lot of documentation on that one, I'm afraid, but there's some general principles troubleshooting we can try with it that might get us moving forwards.
(1) Do you currently have a copy of the Microsoft Visual C++ 2005 Redistributable Package installed on that PC? If so, try downloading the following security update:
[Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update|http://www.microsoft.com/downloads/details.aspx?familyid=766a6af7-ec73-4 0ff-b072-9112bab119c2&displaylang=en#filelist]
Does iTunes install for you after applying that update?
(2) If no joy there, head into your Windows Update and click on the Update History. Have a lot of Updates also been failing for you recently? If so, doubleclick on the entries for the failed updates to bring up more information on each. What error codes appear for you for the failed updates? (Precise spelling, please.)

OCCI 10.2.0.3.0 Patch 13 cause crash ntdll.dll on vista 32bit

hi,
I ceated an application using VC++ 2005 and OCCI 10.2.0.3.0 (update patch 13). the application run smoothly on 2000/XP. But if it is run on vista (32bit, tested on several computer), it ocassionally creates crash (not always) when trying to connect to oracle server (also when trying to connect to non existance server, sometimes crash and sometimes successfully displaying time out message),
The crash message is as follows:
Problem Event Name:     APPCRASH
Application Name:     myapp.exe
Application Version:     0.0.0.0
Application Timestamp:     473ad65c
Fault Module Name:     ntdll.dll
Fault Module Version:     6.0.6000.16386
Fault Module Timestamp:     4549bdc9
Exception Code:     c0000005
Exception Offset:     0006278d
OS Version:     6.0.6000.2.0.0.256.6
Locale ID:     1041
Additional Information 1:     97d2
Additional Information 2:     aae4dc92551b959656fcd53b4bc6e928
Additional Information 3:     0701
Additional Information 4:     257a6a00f5b8f65db312588a0172a174
here's the code snippet:
try
     Environment* m_occiEnv;
     Connection* m_occiCon;
     m_occiEnv = Environment::createEnvironment();
     if (m_occiEnv != NULL)
          m_occiCon = m_occiEnv->createConnection(user, pass, constr);
          if (m_occiCon != NULL) return SUCCESS;
catch (SQLException ea)
     m_strLastErr = _T(ea.what());
     return FAILED;
I then tried to upgrade the OCCI using OCCI 11.1.0.7.0 (using the same source code). It also creates random crash but on OraOCIEI11.dll (not ntdll.dll) as follows:
Problem Event Name:     APPCRASH
Application Name:     myapp.exe
Application Version:     0.0.0.0
Application Timestamp:     494c1430
Fault Module Name:     OraOCIEI11.dll
Fault Module Version:     0.0.0.0
Fault Module Timestamp:     48e3389a
Exception Code:     c0000005
Exception Offset:     00103991
OS Version:     6.0.6000.2.0.0.256.6
Locale ID:     1041
Additional Information 1:     298d
Additional Information 2:     d9ff73d6b133e41e5ad025e8ab5a02eb
Additional Information 3:     3eb8
Additional Information 4:     aa3992fb7f26e9ad1e018c76d9dcdb5a
any suggestion?
thank you
Edited by: chn on Dec 19, 2008 3:19 AM

hi again,
I tried to change the createEnvironment into the following:
m_occiEnv = Environment::createEnvironment(Environment::THREADED_MUTEXED);
and somehow, using the latest OCCI 11.1.0.7.0 with the above code, the application seems running well. Tested around 40 times, haven't got any crashed.
When using the OCCI 10.2.0.30 patch 13 with the above code, the application occasionally is still crashed.

I tried to update to the most recent itunes, but the update failed and now when I try to open itunes a dialog box pops up and tells me that it can.t open because MSVCR80.dll is missing. I need help!

I tried to update to the most recent version of itunes but the update failed. Now when I try to open itunes I get a dialog box telling me it can,t open because MSVCR80.dll is missing. I tried uninstalling and reinstalling itunes but I grt the same message. What can I do to fix this?

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

I tried to update iTunes yesterday. The update failed. Now when I try to open iTunes it says that the version isn't localized and needs to be run in English. It has never been in another language.

I attempted to update iTunes yesterday. The update failed. iTunes now won't open and displays an error message that the program isn't localized and needs to be run in the English version. I'm in the US and the computer and program has never been used in another language. I tried reinstalling the full download for the new version and that failed as well. I logged out; shut down; restarted; retried the update; etc. Still no luck and the same message. Thoughts?

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

ERROR 1002 WHILE ROCOVERY DISK HP G60-441 US WINDOWS VISTA 32BIT

I HAVE HP G60-441US MODEL WITH WINDOWS VISTA 32BITS, PRODUCT NUMBER NW142UA. I TRY TO MAKE ROCOVERY DVD DISK WITH RECOVERY MANAGER BUT IT IS FIALED ON 2ND DVD. THEN I TRY TO RECOVERY WITH RECOVERY MANAGER IT SHOWS ME ERROR 1002 WHILE I PRESS OK ; COMPUTER IS RESTARTED AND BOOTMGR IS MISSING PRESS CLT+ALT+DEL FOR RESTART. AFTER THAT I CHECK HARD DRIVED MEMEROY IT IS ALSO FAILED. AND WHILE STATING COMPUTER IT SHOWS ME TO REPALCE BATTERY.
I DID ORDER RECOVERY DISK FROM HP SUPPORT AND REPLACEMENT BATTERY. IT TAKES ONE WEEK TO GET IT.
NOW I WANT TO KNOW THIS IS HARD DISK PROBLEM OR JUST SOFTWARE PROBLEM. I TRY TO DO FORMAT MY COMPUTER DUE TO BAD PROFORMANCE, TAKES TOO LONG TIME WHILE STARTING COMPUTER AND IT IS FIALED ON WINDOWS UPGARDING AND CONFIGURING.
THANKING YOU.

Hello kmdavis. I have read the issue you are experiencing. Your computer is experiencing a hardware failure, and you should contact HP technical support for further assistance. Their options will be based on the warranty status of the computer. If you do not have this information, you can locate it at this website: http://h20566.www2.hp.com/portal/site/hpsc/public/wc/home?ac.admitted=1384280905804.876444892.199480...
You can utilize this website to learn how to contact HP appropriately, based on your region: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Please let me know if you have any other questions or concerns.
Mario
I worked on behalf of HP.

Photoshop cs4 11.0.2 update fails windows 7 64 bit

Hello..
I finally got upgraded to windows 7 64 bit and and installed the cs4 download I got awhile back and it installed cs4 11.0 no problems. I got every update to install but the 11.0.2 update fails and I get this message
"Adobe Setup has stopped working"
I have tried every thing I read, run as admin, move stuff out of appdat folder, reinstall.... reboot 39 times , I have no windowd defender or AV running at all everything I can find on here does not work and I get this error..... I read everyone gets this error except a darn few lucky souls..... so I tried compatibilty modes, it does the same error from win 98 all the way to win 7, xp same error vista same error it don't matter what version of windows this update seems to just stop working, so I did a troubleshooter on it and it determined that this program is incompatible with windows... I tried downloading it from Adobe and tried that... same error everytime.... don't matter if its through adobe updater or direct download this update fails and I decided to try 11.0.1 and it does the same so I guess PS CS4 11.0 is really not updatable to 11.0.2. and adobe suggests you to go cs5 to solve this problem. Except their updates fail to it looks like on this forum....
This is the problem details I get if it helps, because it does not leave a log for some reason.
Problem signature:
Problem Event Name:     APPCRASH
Application Name:     Setup.exe_Adobe Update Installer
Application Version:     2.1.60.0
Application Timestamp:     4a696125
Fault Module Name:     Setup.exe
Fault Module Version:     2.1.60.0
Fault Module Timestamp:     4a696125
Exception Code:     c0000005
Exception Offset:     000448e5
OS Version:     6.1.7601.2.1.0.768.3
Locale ID:     1033
Additional Information 1:     0a9e
Additional Information 2:     0a9e372d3b4ad19135b953a78882e789
Additional Information 3:     0a9e
Additional Information 4:     0a9e372d3b4ad19135b953a78882e789

I have tried run as admin, same error pops up, I tried giving myself ownership and special permissions and everything to the PS folder since the exe is read only thinking thats why it wont update... I ran the clean script and reinstalled and tried every trick known to man ( well this forum and several others found on google) and nothing seems to work, the 11.0.2 update itself crashes, so I am just going to assume its windows fault because it does seem to work for other people....but it does seem to crash on mac I have read too... I have UAC disabled and no AV installed trying this so I installed my trend micro AV and checked and the puter is virus free so am not sure why I can not use the update but here is the screen shots I get....
I run setup.exe as admin I get this
then when I click on next, with 2 seconds I get this popping up, count 1,2 bam their it is..
so no matter what I do I get this error on 11.0.1 or 11.0.2 updates in every mode or permissions you can give...

Dv6-2018ax Original BIOS for Windows Vista 32bit

I have tried for hours to find the original BIOS for the DV6-2018AX (windows vista 32bit) with no luck. I know there is no BIOS update... I am not interested in that, just the bios it came out of the factory with. If anyone could help me I would be much appreciated. This is for a USB flash... As I cannot recover the BIOS by normal means. Thanks.
This question was solved.
View Solution.

All BIOS versions for your model are posted here:
http://h10025.www1.hp.com/ewfrf/wc/previousVersions?softwareitem=ob-83686-1&cc=us&dlc=en&lc=en&os=40...=
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

6.0.1 Update Failed to Install

Has anyone else encountered this issue?
My system:
* Vista 64 Home Premium SP1
* Single user/admin
My Adobe Apps:
* CS4 InDesign (6.0.0) Stand Alone (not part of a collection)
* CS4 Web Premium
Update process:
* Download manual patch for 6.0.1
* Extract from ZIP
* Disable Anti-Virus
* Run Setup
Results:
* InDesign 6.0.1 update "failed to install".
Attempted resolution:
* Disable UAC - no change
* Safe Mode - no change
* Download the update again in case it was corrupted - no change
The Photoshop 11.0.1 update, part of the Web Premium collection, worked by using the exact same update process that failed for InDesign 6.0.1.
Any suggestions?
-mt

I have been trying to update to 6.0.1 for weeks. No success. I found the log.gz file as you suggested and opened in wordpad but the file is either encrypted or corrupt. The date and time of the file is when i originally installed InDesign. Nothing has been added either today or on previous attempts to update.
I have tried to attach the file but as it's not on your list of allowed types it may not come with the message, so here is a sample:
_, ðÓ\_måú|ƒzx ¨‡Ò2jneÀž ¹.Ä
I¶\K¦ˆÜYTó ºZo ¯-d px ‡²2° yŒÊk Ž 0£*• äQ¤¢gOß úAê_ÌüO³ÖÛ°: ä $# G2?¿~þ　ôÕ　ì
ÈˆF®¸êÒY¦‰… J[€Œ x$$Tœ¤âQ!FzD5µ} ~ú ¾'Q cx± q¡[²ÑíUø<œÍAµí…sn Ö¶ÃùKÔ‚ »øã&¼lMÂôöe
Ú|™^{^
í§bÂh‡ôh»£»ºÍ˜I¬F]Þîô»¬7@　*D÷_Ÿð ú„>}[¼ÚÜÑq" E×ìÂ{Çô´q´Fæ DšC /¯ú¯ËëÿÛòfn^þçâ¥Bö¼;•dø¯{Ó¿|)ÚJ5%– }}3oõÈ!}ï*ÌªÇÀ
èþëp–^‰vÍlèÎæ7v—¼
U°CUA*U\¿ ¼ÿØ¹êß·T ÆBÖ 3HŸª@ Ó　‹±37aÝÇZ ½ï®z
]]£X
×<ÀÍËÒ]c[MÒòYäÃ#¨ wHlyT5ŽÃâ• Öâ8ðØv- h}g%Ž \Wâ€¶ö×áXýÐý* ðùƒ58ÒÏoUà€ ¶êoT?ppõU÷‡ Ô8V¡hÙþAå4Žnü8Cl¢œÆ1/‹U-µ4-^mª¥Q Óº:!Óú HAþ　[ÿƒ ä Rÿ5tëkÎŒÙº　ÆS‹l¬øŽpÂoÇ› ÎZáOÓÐòãQxy"ó|P˜Šãé b¦ûò~\¹ï6K¤ «¿AHˆ;@)n8I }ÃQ ¾Av oÆßž?»þ2þ¶@8ŸCÖÂOG§·F÷ã@ Ãt~öüÙâÏc ±úíCÀtýÖæ´ ,É¸Ú
\^b°"õ÷ß‚Z®êÕ^‹
Your advice would be appreciated.
Anne

Error 1500 Update failed adobe reader

Windows Vista SP 2, HP Pavilion m8
200n Home Premium adobe reader
adobe reader
When I was updating my Adobe Reader, I got an error message that said, "Error 1500 Update failed."

First thing I would try is to uninstall & reinstall Adobe Reader.
If you also get the error during the uninstall, use the Windows Installer Cleanup Utility to remove it.

HT201210 Itunes update failed to install and now Itunes won't run

Itunes update failed to install and now Itunes won't run

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

10.4.1 update fails on vista 32bit

Similar Messages

Maybe you are looking for