10.4.10 update and very strange problem with Mac Mini

Dear All,
I have just updated my Mac Mini Intel and I am having a strange problem.
My Mac Mini has problems booting up. Sometimes I get through the login screen as normal but my wallpaper shows and there are no desktop icons, no dock, no top of screen finder menu bar. Some other times I get stuck in the progress bar of the booting up.
I tried to run utilities from install disk and there were no problems detected.
The VERY STRANGE thing is that several times now as I put my fingertip onto the power button laying it on the button but not pressing it yet (because I would like to shut down the system), the system kicks in and becomes unfrozen!!!
Someone in the 123macmini.com forum says that this problem is related to the airport receiver which is near the power button.
What do you think about it???
MacBook and MacMini Mac OS X (10.4.10)

ok, I have found a kind of fix for the problem, although may run a hardware test to check something!.
I unplugged all USB and Firewire devices, I turned off Bluetooth and Airport, reinstalled the 10.4.10 combo update, when it restarted the starting mac osx screen took barely a second or 2 to load (my comment above is becuase from when I first got it on Sunday I noticed it was slow to boot up, also noticed that the screen resoulution I have set does not kick in until I log on, although this may be becuase this mac mini is an intel one). The computer booted up very quickly and I tuend on bluetooth and airport with no issues and plugged all the usb and fireware devices back in. I again turned the airport off and restarted and again it booted up very quickly logged on and swithced the airport back on. I decided to reboot with the sirport on and it got stuck at the end of the os x starting up screen, I waited a few mins switched it off and on again and it booted up fine although slower. I dont mind turning the airport off when I power down as the mac usually stays on anyway. I assume Apple will release a fix for this as a lot of people seem to have the problem so think I will stay put with this for the time being. It was taking a several goes to get to the login screen before but usually got there every few boots.

Similar Messages

Strange problem with mac mini hdmi, denon avr 3310 and itunes

Hello,
I just bought the new mac mini with HDMI. It is connected via HDMI to my receiver Denon AVR 3310. The receiver shows that it has "multi channel in" on the display.
I made all the configurations so that i can watch dvd an the mac mini. When i play a movie with Dolby Digital the receiver does show that on the display and playback is possible without any problems. I hear sound on all my 5.1 speakers.
The big problem is with iTunes. When I want to watch rented series, for example Dr. House, only 2 speakers of my 5.1 are used. And when I change to surround in iTunes I can only hear static noise.
What is the problem? Did I make a wrong configuration or is something wrong with iTunes?
Thanks in advance

Great news! My Mac mini is sending true 5.1 to my reciever through the HDMI cable! Okay so here's my list of gear.
MAC MINI 2011 2.5 i5 8gb ram
Using a quality audioquest hdmi I have connected my Mac mini to my Denon 1712 Reciever. I have connected this hdmi cable into hdmi port entitled game 2. I have connect my reciever to my tv with a monster 1000 hdx thx certified hdmi cable. It has a transmission sped of 17 gb or so...meaning it can handle transmitting 3d...if only I had a 3d tv.
Okay so that's the gear. Now onto the changes in audio midi. Open audio midi and Simply change it to 48000 hz and to 2 channel 16 bit integer. That's all I did and now it works. Before I had it set to 8 channel 24 bit and when I pulled up my surround sound options I could pretty much only get multi channel stereo. Now I can get several Dolby choices.
The voices are coming out of the center speaker and all the action is coming out of the other speakers....so in other words 5.1 surround sound has been achieved on my Mac mini 2011 which has Lion on it.
I have tested this with iTunes and Netflix. Both are in 5.1 and sound great. In iTunes I have tested both music and digital copies of movies. Both worked flawlessly.
Rejoice Mac mini owners 5.1 surround is now possible over your Mac mini 2011 edition with just an hdmi cable to your reciever. You can throw away that toslink cable becuase now you don't need it!
I hope this works for you. Remember not all hdmi cables and the same holds true for your reciever. If it does not work consider getting either audioquest or monster....everything else is junk.

I have very strange problem with Iphone 3gs. Whenever it gets little hot or exposed to 30 degree temperature it losses signals (No service). Whenever it is cooled down the service is back. Please help!

I have very strange problem with iphone 3gs. Whenever it gets little hot or exposed to 30 degree or above temperature it losses signals (No service). Whenever it is cooled down the service is back. Whenever I am using Skype or playing game for a while it losses carrier signals and wifi. When it is cooled down afer shutting down the carrier signals and wifi are back. It is for sure problem is with heating, but 30 degree tempeature in Oman is normal and some time it goes upto 50 degrees. I have noticed this has started after I started using substandard charger as I lost my original charger of the phone. Please help!! Thanx.

The specifications define an operating range up to 35 degrees.

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration...

Problems with mac mini recognizing aluminum keyboard

I have a Mac Mini 1.4ghz dual core and I have problems with it recognizing the apple aluminum keyboard. The keyboard works fine with my macbook. The keyboard actually works fine if I do a restart but if I shut it down and then open it, the keyboard was not recognized. I spent hours with Apple support trying various combinations of connecting and reconnecting to the usb ports. I did my own research and found that I could get the keyboard to work if I connected it through an external 4 slot usb hub, although it showed that it was connected through aa a usb 2 hub rather than the usb 3 hub which is standard on the mac mini. Shutting down and starting up with the external 4 slot usb hub (it does not have its own power source) always works. All of my other devices work flawlessly with all the usb ports on the mac mini. I finally (although I doubt that this is final) was able to get the keyboard recognized on the mac mini by plugging the keyboard into my macbook and then plugging my iPhone into one of the usb ports on the side of my keyboard. I unplugged the iPhone from the keyboard and I then plugged the keyboard directly into the mac mini and it was recognized and worked fine. I did a restart and the keyboard worked fine but I am a little reluctant to shut it down for fear that on start up it will be lost again. The only thing I can think of is that I had the iphone plugged into the keyboard before this all happened and unplugged it without removing the iphone from the desk top and that screwed things up. It is the only conclusion I can come to. I would appreciate any thought or ideas people might have. As I said I spent two days and may hours with apple support and they could not help me other than to tell me to take everything to the genius bar which I am reluctant to do.

Thanks for the response but I think maybe you missed part of my post. The keyboard works fine with my mac book and with my son's macbook. The keyboard is actually working right now. It has been a problem with shut down and then strart up. I think that I went through all those other SMC and PRAM efforts with Apple support and actually many others and they were completely stumped. I think that this is a complicated problem for which there may only be a work around but I am hopeful that the next time I shut down, it will work. I appreciate ideas but if my 4 or 5 hours with Apple support cannot help, I do not believe this is going to be a simple solution but if someone has encountered this or something similar, I would welcome their ideas. I have gone to the Apple Store in Madison, WI on several occasions and unfortunately I often know more than the people that help me so I am reluctant to go there and to trust the staff at the genius bar. For example, I recently purchased and Apple watch and the first person that helped me did not know how to turn it on and the second person did not know it came with two different length bands, and I once bought a case for my iphone and the person who helped me was more interested in the color than in the functionality of the case. I could go on but I am not confident in the competence of the staff there so I am hoping that someone in the support community can help me.

10.4.7 update and external firewire problems with HD corrupion

Dear all,
Advised by Jpfresno I started this new topic about Tiger 10.4.7 update.
I will repeat my post and what was happening 2 weeks ago:
“In 5 years 10.4.7 update was a tragedy for my Powerbook Ti 667. When I update from 10.4.6 to 10.4.7 my 300 GB firewire drive gets corrupted, after repairing it with DiskWarrior and after connecting it to my PowerBook my computer freezes and I must shut it down via powerbutton. Safari also crashes after the update.
I just erase my Hard Drive and after that install 10.4 and update with combo to 10.4.7. But I had the same problems: finder freezes with connected firewire devices and also safari when browsing. I spend a week trying to solve the problem but no luck.
Yesterday and with no firewire devices, 10.4.7 freeze and I have big trouble in order to started my powerbook!!! Even when i insert the 10.4 install DVD it did not detected my HD. Finally I get it to work and install 10.4 and combo update to 10.4.6 and everything works. My external firewire drive and safari. I already diagnose my HD with disk utility, TechTool and directories with Diskwarrior and everything is ok.
I clone my 10.4.6 to firewire, boot from it and everything is working. I let my external drive connected and finder does not freeze.
My conclusion is that the problem is 10.4.7 update. It only give me problems and I was getting crazy with it. 10.4.6 is working good and I do not advice anyone to update to 10.4.7.”
Last week after reinstalling 10.4.6 I started to have HD problems with my Powerbook 667. I did a surface scan with TechTool I it reported bad sector. Then I done a zero disk format but after a second surface scan TechTool also reported bad sector. Then I take the decision to replace my internal HD. I bought a Samsung 40GB Hard Drive and installed it on my PowerBook. Then I have done a clean installation of 10.4.6 with all applications that I need and clone it to my hard drive with Intego Personal Backup software. Everything works on 10.4.6. and external firewire drive.
After that everything is ok. But I decided to test if my problem derivates from 10.4.7 update or from previous HD corruption. Then I install 10.4.7 update on my Internal Hard Drive. Everything is working good but after connecting my external Hard Drive the finder started to freeze!!!!!!!!!. After that I tried cloning HD to external firewire with Intego personal Backup. Everything was working good but when it was finishing the backup process started to give errors!! I started panic. I interrupted the backup process but after and after restart I found something strange with 10.4.7. The system started up, I login but I could not started any application!!!??? All my application died!
Then I have done one more clean installation of tiger and 10.4.6 update.
My conclusions are that the 10.4.7 update causes all the problems that I have on my PowerBook, because I used the same methods and same software/hardware on 10.4.6 and did no have any problem.
This last two weeks were very difficult to me. I tough that these problems do not happen with Apple computers but I was wrong!!! It is very hard to me to deal with it. I always said to my friends that I never had problems with Apple computers. I accept that a hard drive died because the use of it but I can not accept that a system update cause me 2 weeks of hard problems and make me loose precious work information! I always love apple computers and Apple OS but now I am disappointed
If anyone can explain what happen or have a solution for those problems?
Thanks for the comprehension and collaboration.
Best Regards
Mac OS X (10.4.6)

Hi, alsvieira.
There are some things you did not check in all of your troubleshooting:
1. Run the Apple Hardware Test (AHT) that came the affected computer. See my "Apple Hardware Test" FAQ for comprehensive advice on using the AHT in troubleshooting.
2. re: FireWire troubleshooting: Here is some general troubleshooting advice that may help if problems return with your FireWire drive:1. Review the AppleCare Knowledge Base document "What to do if your computer won't recognize a FireWire device".
2. If this problem occurred after installing a recent Mac OS X Update, and you are also unable to mount CDs, DVDs, or disk images perform the steps in this Mac OS X Hints article. This worked under Panther and may also work in certain situations under Tiger.
3. Power-on the FireWire drive before starting up (booting) your Mac.
4. Reset PRAM and NVRAM.
5. Resett the power-management chip in your Mac.
6. Try a different FireWire port. James Wiebe, CEO of WiebeTech, has published FireWire Port Failures in Host Computers and Peripheral Devices, a white paper providing backgroud information and technical analysis concerning the causes of failure for FireWire ports. This may provide additional diagnostic information.
7. Micromat TechTool Pro version 4 can test the FireWire bus in your computer: this tests the bus — not the ports — but if the problem is on the FireWire bus on the logic board, it should reveal it.
8. Check with the manufacturer of your FireWire drive or enclosure to see if any firware updates are available for such.
9. Hopefully, the partition map on the FireWire drive is not damaged. This can happen if the FireWire drive was not Ejected before being disconnected or powered off. If it still refuses to mount, you may need to employ data recovery tools or services: see my "Data Recovery" FAQ.Note that some of the information above is from the "FireWire Problems" chapter of my book, Troubleshooting Mac® OS X.
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Urgent question very Strange problem with an external HD on mac PRO

Hi,
I have a problem with a external HD on my mac pro.
After many month of regular use with out any problem today when I turned on the HD I could not see it in the finder anymore.
I use this HD for backup of an other external HD and to do the back up I use an application called SYN SYNC
The strange things are:
1) If I start Sync Sync everything works properly as if the sofware recognize with out problem that the HD is effectively there.
2) If I open DISK UTILITY I can see the HD and if I try to repair it the utility after 2 minutes says that everything is ok.
3) If I look for the mac pro (to which the external HD incriminated is connected) on a different mac in my studio over the net I can see the external HD and I can browse the folder, copy items from the esternal HD to the MAC and even copy thing on the external HD.
I tried to connect directly via Fire wire 800 the HD on a different MAC and I could not see it like on the mac pro.
Does enyone have an idea of what's going on?
best regards
Lorenzo

I can still see all the others external Hd with out any problem and I already try this but no results I can't see that HD on the desktop and neither in the sidebar.
As I said the strange thing is that the external HD shows the same behaviour when is connected to a different MAC.
Seams the problem is with the HD not with the MAC.
I even try to use a different case for the HD using also USB connection instead of FW, but nothing change!

Please Help - Very strange problem with internal String encoding

I created a file in one-byte russian encoding cp1251 and declared String literal with 2 letters:
String str = "ab"; //attention! ab - two russian characters
After I got bytes from it - str.getBytes("cp1251") - it returned 2 byte's array.
Now I created a file with UTF-8 encoding with equal content and suddenly:
After I got bytes from it - str.getBytes("cp1251") - it returned 4! byte's array. Why?
I need to get a one-byte encoded arrays (cp1251 or koi8-r) but getBytes ALWAYS returns two-byte encoded arrays.
It is very strange: cp1251 is always one-byte encoded, but .getBytes("cp1251") returns two-byte on each letter. Why? Please help.

I did not read a string from a file. I created 2 .java files with different encodings (cp1251 and UTF-8) and compiled them, telling compiler with -Dfile.encoding=*** to read them correctly. While execution java interprets two looking equal in editor strings as different objects with different .intern() representation.
Why java consider source .java file encoding while creating internal representation of String object and creates from looking equally in editor strings two DIFFERENT Unicode representations. And it is impossible to convert one representation to other - impossible to get two equal byte[] arrays.

Incompatibility problems with mac mini MA206LL/A* and linksys WRT610N

i purchased a new wrt610n and one of the machines that is connected is a mac mini, 1.66 ghz intel core duo.
#ma2066/ll/a for those who want to compare notes. the computer is stock with the 802.11g wireless card that came with the machine. it is running the current software and all the updates are up to date.
i am using wpa 2 personal w / aes
their is some kind of incompatibility or issue between the wrt610n and the mac mini.
either using the wireless connection OR connected directly to the router, web pages are very slow to load. sometimes it can take up to 45 seconds for the mac mini to open up a webpage. for 45 seconds it is at 'contacting website'
when i try to run software update, i get a time out error -1001, make sure you can connect to the internet and try again.
hulu desktop is also running slow.
copying a file from the mac mini to a another computer over wifi averages about 1 mb/s
when i informed linksys about this problem, they took my phone number and said that a linksys Technician / senior tech support employee would call me back. that was a day or so ago. i asked if i can have any newer firmware, considering the latest is 5 months old.
i am considering returning this router, but i don't see a lot of good alternatives that have similar features. i have 21 days to return this. the restocking fee will be 15% i am also considering various 802.11n solutions for the mac mini, even including the dell 1500 wireless mini card, i heard it works as an airport card.
if i do get a different model router i would like external antennas.
my previous router was a 5 year old wrt54gs version 2.0, and it never had a problem with any of the computers with the network.
the trouble shooting steps involved changing the beacon to 75 and the mtu to something else, i forgot. it did not make a difference.
i moved the mini and connected it wired to the wrt610 and turned off the airport wireless card and there was no improvement.
when i disconnected the wrt610n and connected the mac mini directly to my dsl modem. the issues were suddenly gone.
theres some kind of problem with this particular unit. and i would like to hear from others who have solved this or are experiencing the same problem

Just out of curiosity: what internet provider do you have? I'm just asking since I had similar issues after switching from AT&T DSL to AT&T U-verse. Sometimes pages took a very long time to load, or just a part or image of the page. Sometimes I would get a page not found error or something like this and only refreshing the page several times would retrieve and display the actual page.
Here's what I did: I went into my iMac's network preferences and switched the DNS server IP with one from OpenDNS.com, such as 208.67.222.222.
Since then I haven't had these issues anymore. Don't ask me why though; but I would be curious to hear whether this may fix your issue as well!

Problem with Mac Mini and Panasonic PT-AE700 projector

I just bought a brand new Mac Mini and intended to connect it through hdmi to my Panasonic PT-AE700 projector (with a 10 m hdmi-hdmi cable and a dvi-hdmi adapter). However there is no signal recognized by the projector.
Any suggestions? I have tried with two different dvi-hdmi adapters between the Mini and the cable. Both work fine with my MacBook Pro, but with the Mini there is no signal.
Mac Mini Mac OS X (10.4.7)

Thanks again BSteely for your answer.
Unfortunately I still haven't been able to get anything out from the projector through HDMI.
However, I've found someone with a similar problem. It seems the problem is the lenght of the HDMI cable (which in fact is closer to 15 m than 10 m). HDMI is designed to handle at least those 10-15 m runs, but the problem seems to be DVI, which is only capable of something around 5 m. Since I'm converting from DVI to HDMI, I'm subject to DVI's limitations. And the MBP seems to have better capability of handling the weaked signal than the Mini.
Read more: http://www.avsforum.com/avs-vb/showthread.php?t=712218
Gefen should have an amplifier (HDMI Super Booster) that could solve the problem. I just ordered it to see if it could help in strenghtening the signal and solve the problem for me.
Read more: http://www.gefen.com/kvm/product.jsp?prod_id=2939
If someone has any experience from the booster, please let me know.

Problem with Mac Mini and LG Flatron monitor locked in 'power saviing mode'

Hi I bought my Mac Mini in July 2009 and have being having more and more issues with my monitor. Form the beginging the monitor had issues after the mac went to sleep. I have tried setting the exact refresh rate to 60 using SwitchResX, but now I can't get the monitor to display anything is stuck in 'power saving mode' - I have tried everything shutting down the moitor the Mac, disconnection the adapter, nothing works. BTW the monitor is fine I am using my PC laptop and the monitor to write this cry ofr help right now. Its a LG Flatron L222WS and I am using a mini display port to VGA adaptor.
I read somewhere that reverting to Mac OS 10.5.6 might do the trick - any other ideas?

Try starting in Safe mode and see if you can get the monitor to work again. If it gives a useable screen in Safe mode, go into Displays preferences and set the resolution to 1680 x 1050 and restart normally.
Hopefully that will get you back to where the monitor is working again with the mini.
There should be no relationship between a monitor's sleep habits and whether refresh is exactly 60Hz or not, so I wouldn't mess with SRX anymore to try and correct that problem.
http://support.apple.com/kb/HT1455

Problems with Mac Mini and Premiere Pro CC 2014

I am new to video editing with a background in graphic design and typically do short corporate videos.
I am currently using a Mac Mini (late 2012 model), running Mavericks 10.9.5. And I keep having a problem with Premiere Pro CC 2014 freezing in the program monitor, while scrubbing through the timeline.
Here are my specs:
Processor: 2.6 GHz Intel Quad Core i7
Memory: 16 GB
Graphics: Intel HD Graphics 4000 1024MB
I am also using a 2TB Fantom G-Force Megadisk external HD to store all my media. It is connected via a Firewire 800 cable
I'm wondering if the freezing is caused by Mac Mini having a integrated graphics card vs. a discreet one. Has anyone else had any problems like this using a Mac Mini?

I am new to video editing with a background in graphic design and typically do short corporate videos.
I am currently using a Mac Mini (late 2012 model), running Mavericks 10.9.5. And I keep having a problem with Premiere Pro CC 2014 freezing in the program monitor, while scrubbing through the timeline.
Here are my specs:
Processor: 2.6 GHz Intel Quad Core i7
Memory: 16 GB
Graphics: Intel HD Graphics 4000 1024MB
I am also using a 2TB Fantom G-Force Megadisk external HD to store all my media. It is connected via a Firewire 800 cable
I'm wondering if the freezing is caused by Mac Mini having a integrated graphics card vs. a discreet one. Has anyone else had any problems like this using a Mac Mini?

Problem with Mac mini and HP w2207h

I have a new Mac mini and a HP w2207h screen. I have a problem with the resolution. The screen wants to be on 1680x1050, but when i turn that mode on, the screen is just blinking and you can't see anything. so i have to use the 1080p modus. But it's kind of blury. Can anyone help? Does apple has some kind of support mail??

Don't waste your time or money on the adaptors. I have a hp 2207h and I tried th dvi to hdmi and the dvi to vga, neither work, I still don't have a working monitor. Waited on the phone for tech support for 30 minutes. Then got a total line of crap.
This monitor works flawlessly with my comcast motorola hd cable box, with my sony dvd player, with my toshiba laptop, with my hp computer. But will not work with a mac mini... The only logical reason given the wide varity of equipment it will work on, is that apple does not support HDMI standards, if they did, it would work.
The apple does work on my 40 in tv. But thats not where I want it. So, this is useless to me. And after the line of crap I got from tech support, I'm thinking about quiting apple all together.
This ***, I was really excited about my first apple computer. Now after 4 hours, and nothing but frustration and no support at all from apple, I'm thinking about giving up and sticking with PC's from here on out. Worst experiance ever.
I may even switch to android and chuck my 4...

Networking problem with Mac Mini and TIVO

this is what i want to do
move my recorded shows on my tivo series 3 over to my mac mini via my ethernet connect
my Tivo sees my pictures in I-photo as well as my pictures on Photobucket
but my Mac Mini will not see my Tivo
i downloaded Tivo Desktop and Tivo transfer as recommended
tivo transfer on my Mac Mini still will not see my Tivo
now they do recommenr Toast 9 for burning the videos
but i am not burning just transfering
my versio of Toast in version 8
i am asking this because do i need to buy toast 9 or is there something else preventing the Mac from seeing the tivo
remember the tivo DOES see the mac
thanks in advance for any help
i hope i posted it in the right area, networking seemed to br the closest

Don't waste your time or money on the adaptors. I have a hp 2207h and I tried th dvi to hdmi and the dvi to vga, neither work, I still don't have a working monitor. Waited on the phone for tech support for 30 minutes. Then got a total line of crap.
This monitor works flawlessly with my comcast motorola hd cable box, with my sony dvd player, with my toshiba laptop, with my hp computer. But will not work with a mac mini... The only logical reason given the wide varity of equipment it will work on, is that apple does not support HDMI standards, if they did, it would work.
The apple does work on my 40 in tv. But thats not where I want it. So, this is useless to me. And after the line of crap I got from tech support, I'm thinking about quiting apple all together.
This ***, I was really excited about my first apple computer. Now after 4 hours, and nothing but frustration and no support at all from apple, I'm thinking about giving up and sticking with PC's from here on out. Worst experiance ever.
I may even switch to android and chuck my 4...

Problem with mac mini crashing and a folder icon with ?

I have a mac mini i5 and its been playing up. Randomly it will get the multicoloured spinning wheel and crash, the screen will flick on and off and then I get a white screen with a folder and a ? inside it. Anyone got any answers or solutions?

Maybe:
A flashing question mark or globe appears when you start your Mac - Apple Support
Also note the time of the crash and upon rebooting open the Console app in the Finder>Applications>Utilities folder and look for suspicious log entries at that time and post them here

10.4.10 update and very strange problem with Mac Mini

Similar Messages

Maybe you are looking for