10.4.11 and bonjour connections
Hi,
I'm having major problems with Leopard and Snow Leopard clients connecting to the server via afp. The connection time is around 3 - 4 minutes each time you want to connect. I did manage to resolve the speed issue by turning off 'enable bonjour registration' but the file names turned into random characters when viewing in 10.5 and 10.6, 10.4 was fine. Does this mean that leopard and snow leopard use bonjour to connect to the server and not afp?
So far I have tried
Adding the server to the hosts file
flushing the dns cache
connecting both client and server to AD
Checked port 5353
I am now completely baffled and have now idea why it's not working the way it should.
John, I agree that finally Aperture will now handle 40D raw files. However, since I installed 10.4.11 and the Aperture 1.5.6 update, the auto-exposure button is grayed out, and all my 40D files shot over a 2 week period have white balance settings of temperature =5000, tint=0. I always set the camera for AWB, so it seems strange that all the WB settings before any adjustment are exactly the same. To check this, I exported a raw file that I expected to have a temperature of somewhere in the 3000 range and looked at it in Camera Raw. Camera raw shows the as shot temperature as 3700, tint 16.
Similar Messages
-
[OSX 10.7] loosing bonjour connection Officejet Pro 6500
I have an Officejet Pro 6500 and can't get the printer to work flawlessly.
This is the problem:
After installed the printer successfully everything works fine, but after a few minutes (mostly around 10 - 15 minutes). OSX cannot find the printer anymore trough bonjour.
The only solution is to shutdown the printer and putting it back on. But when it's on for a while, the connection is lost again.
What did I try without any luck:
Changed the Wifi channel to a more clean channel for a more stable connection.
I gave the printer a static IP, added the printer by IP instead of bonjour, no problem anymore, but then scan to pc is not working when the bonjour connection is lost, so this is not an option!
I removed the printer completely from OSX and reinstalled everything
All firmware / drivers are the most recent
Tried with a network cable in the router instead of using Wifi
What did I discover:
I ran a ping to the ip address of the printer, and noticed the connection wasn't very stable (even when the printer is allmost on top of the router)
When the connection to the printer is lost for a second or two (due to wifi dropping the connection) I notice the OSX can't find the printer anymore through bonjour, I cannot open the webpage of the printer also (http://HPxxxxx.local.) but I still can open the webppage trough IP (http://192.168.x.x) when shutting down the printer and putting it on again, I can connect to the bonjour address again and OSX can find the printer again.
Does anyone have a solution for this problem or is it the crappy bonjour support of this printer ?
Is it possible the problem points to the wifi router/modem ? I allready bought a new router and will test this tommorow.
Please let me know if anyone had this problem and how it was fixed.
Thanks!I'm having the same problem-- but also with an Epson printer, so I'm thinking it's probably interference. That's what I'm hearing from other sources. In my case, if I turn off the wireless extender I'm connected to, the printer connections are found again. Otherwise, if anyone has any ideas, I sure would appreciate it.
-
RV110W (firmware 1.2.0.10) and bonjour
I run all apple devices - Mac Pro x1, Mac Mini x2, iPad x3. Recently, during the last couple of Apple update cycles I have been noticing slowdowns on wired and wireless connections through the wireless router RV110W. Desktop machines are largely unaffected, but the iPads generally suffer slow http access and cannot stream reliably.
An update to the latest firmware did not resolve problems.
The log files are filled with two types of entries.
"mDNSResponder: ERROR: getOptRdata - unknown opt 65002"
"mDNSResponder: ERROR: getOptRdata - unknown opt 4"
These messages seem to be related to bonjour. I disabled Administration>Bonjour and this seems to help. However, I want to continue using bonjour for the autoconfiguration capability.
Any recommendations? Is this a bug on apple or cisco's side - or both?Further investigation reveals that the rv110w is behaving badly on the network. This is after a few months of having the hardware work well together. Substituting a new router (different manufacturer) made the network normal.
-
I have an iMac running OS X 10.8.3 and have connected an Epson Workforce 2540 printed that is allegedly Airprint enabled. I can connect and print with a USB cable but can't connect via Airprint. My colleague running 10.7 can. Is this a feature of 10.8? Any ideas for a fix?
iOS devices use AirPrint to connect to a supported printer. OS X will use Bonjour to locate and connect to the same printer.
With the Epson connected to your wireless router, when you open Print & Scan and click the plus button to add, does the Epson appear in a small box with a heading of Nearby Printers?
If not and a window appears showing Default, Fax, IP and Windows in the toolbar, do you see the Epson with the Default view selected? -
hi everyone
how do you in xcode search devices in bluetooth and stablish connection other devices whit iphone or ipad ?
the all answer is good
and the source is enable for allBluetooth on iOS has three different functions:
o user level features -- For example, headsets. There is no developer opportunity here (well, you can play audio that comes out the headset, but you know what I mean :-).
o networking -- You can establish a PAN network to other iPhone OS devices with GameKit (going away) or Bonjour.
o accessories -- All Bluetooth accessory developers must go through the Made for iPod program. Once you have an MFI device you can then talk to it through ExternalAccessory framework.
<http://developer.apple.com/ipod/> -
My Windows XP AirPort util and Bonjour can't find any wireless device
I have both macbook and a PC laptop.
I just started using my TimeCapsula and all features (Internet gateway, access to the USB printer and the external harddisk) are visible and working fine when using my macbook.
My PC wireless card seems to be working fine too and I can access the Internet using the Airport gateway.
My problem is that Airport Util and Bonjour on my PC "can't find any wireless devices" (even though It is clearly working fine) and therefore don't detect/mount the external drive or the Printer.
Thanks!How do your Extreme and Express connect to one another? Wired Ethernet between the two, or wirelessly?
Try unplugging the Express. Does that change anything?
Wireless interference could cause the symptoms you're describing. Even though you did nothing to your wireless network, the presence of other wireless networks or introduction of nearby devices will bring interference where there was none before.
AirPort and Bluetooth: Potential sources of interference for wireless devices and networks
Try changing wireless channels; use "automatic" unless you have reason to use a specified channel. Try checking "interference robustness". Altering these settings may help, but they could make things worse.
If you are unable to configure a device over Airport, or changing a setting leaves you unable to configure it wirelessly, connect its Ethernet port to your computer's Ethernet port and Airport Utility should find it.
As a last resort, try a "hard reset" followed by re-configuring the Extreme, Express, or both. Start by removing your Express from the network. Re-configure the Extreme and see if that fixes things. If it does, add the Express to your network and re-configure it as well.
AirPort troubleshooting guide
I open airport utility ... can not locate any of my wireless devises, airport extreme base,, airport express, apple tv, wifi printer.
AirPort Utility will only detect Apple AirPort base stations (Extreme, Express, Time Capsule) for purposes of configuring them. It is not designed to detect or configure other wireless devices like your printer. -
Linksys Router and Bonjour Services
Does anyone have any experience getting Bonjour services working with a Linksys router. I've got a Linksys Etherfast router (BEFSR41) serving two Tiger Macs, and one Leopard Mac. I can manually connect from any computer to another computer (Go -> Connect to Server) and transfer files. However, bonjour services such as iChat, iPhoto Sharing, and iTunes do not work.
I found out that when I go to the routing tab on the router, and save the settings, as the router powers up and powers down some contacts will quickly appear and disappear in my iChat Bonjour contact list on all of the computers on the network, but even if I quickly click and try to IM with one of them, nothing gets through.
Any thoughts on getting this working?I used a linksys wrt54g with 3rd party software for the longest time and bonjour worked perfectly.
I would check in the web UI of your router to make sure setting such as 'filter multicast" is disabled as in this example.
Also try setting your mac's built in application firewall to allow all connections. -
New FIOS customer with dropped VOIP calls and Internet connection
I am a new FIOS customer. Got my 50/25 connection a week ago, switching from a TWC 6/1 connection. Ever since the new connection, I've had numerous issues.
My VOIP (Ooma) connection constantly drops and re-connects during conversations
I've had random Internet connection losses, which picks up again after a few minutes
My home alarm starts chirping every once in a while
I've contacted Verizon several times due to these problems and have received varying answers with no resolution of the problem.
The first time I spoke with support, the tech logged into my router and changed the WiFi channel saying that would fix the problem. It didn’t.
The second time I contacted them, the tech ran a bunch of diagnostics and said everything looked fine so it must be an IP address conflict with my devices, because I had a couple devices using static IP addresses. He said everythinf should be DHCP and the last two digits could not be higher than 99 (192.168.1.99). He said FIOS does not support 3-digit numbers at the end.
So I changed all my devices to DHCP and ran some online VOIP tests. It showed a packet loss of 2-5% and MOS score of 1 (which is bad). I was still getting dropped connections, so I disconnected all devices and connected just one computer to the router and tested again. I was still getting packet loss.
Then I called support a third time, this time the tech said there were no 2-digit IP restrictions and that he was detecting there was no UPS baterry backup for the ONT which was probably causing the problem, so he dispatched a field tech to my house.
Today the field tech came (same guy as before), he took one look at the box and said it was too close to my Electric meter and the RF from the meter was causing interference to the FIOS connection and resulting in dropped connection.
He moved the ONT to another location and said that should fix it.
Well, I'm still seeing packet loss and low MOS score when I run the VOIP test.
I don't know how much of what the techs are saying is true and how much is made up stuff.
Has anyone had similar issues and have thoughts on solutions or likely causes for dropped VOIP calls and connections? Could RF be causing this?
I thought going from a 6/1 Cable connection to a 50/25 FIOS connection would be awesome, but this has turned out to be a nightmare, and I may have to switch back to cable if the problem is not resolved.
I would appreciate any help.
Thanks!Don't know where the packet loss is happening. I ran the VOIP test on myspeed.visualware.com and it shows a packet loss of 2-5% at different times and a MOS score of 1.
The report says MOS should be around 4 for good VOIP calls.
The Verizon tech who came to the house just blamed the electric meter box for RF interference and move the ONT farther away.
My concern is that I'm getting different answers from different techs at Verizon.
Regarding IP addresses. The Router shows a DHCP range from 192.162.1.2 to 192.168.1.254 as available for devices on the network. So, if I need to assign a static IP to a device should I use a number below 99 or above 151?
Thanks! -
What is the better way to open and close connection in bean
Hello, may i ask about the best way to open and close the connection?
At the first, the connection code is store in Conn class bean. The JSP page will call a method in Process bean to process the query and update of database. the Process bean is using th Conn to connect to database.
In my process bean, it have a method for each type of sql like select, insert, update, and delete for each tables. Each method will call the Conn to open and close the connection. The jsp page can simply call a method retrieve or update records.
However, when calling the processUpdate method, it is a method that update a group of tables base on the query result of another group of tables and calculation. If I calling the query method in the same bean file, it will open and close the connection many times (more than 1000 times). After open and close the connection several times, the connection to mySQL will be fail.
Currently, i include 2 method in Process that is only calling the Conn to open the connection and close connection. When calling the openConnection method, it will also set the boolean connected in the class to true and call Conn to open connection. When calling the closeConnection method, it will also set the boolean connected in the class to false and call Conn to close connection.
After that, i add some change to the query method which is when the connected is false, it will open the connection by calling the Conn and close the connection themself. If the connected is true, it will not call the Conn to open and close the connection because it already connected to the database.
Now, i when i calling the query method in jsp, it can open the connection and close the connection individually. When i call the processUpdate in the jsp, this method will calling the openConnection before calling the query and calling closeConnection at the end. It not only faster the process(less open and close), it also no cause the connect to mySQL fail error again. However, it also make the coding in the bean file more longer and complex.
Is there have any better solution?Use connection pooling. This will put the connection management in the hands of the webserver, not your code. Check out this post:
http://forum.java.sun.com/thread.jspa?threadID=741788&messageID=4252932#4252932 -
Open discoverer report in new browser window and without connections page
Hi All,
We are using Oracle 11g Discoverer 11.1.1.4. Requirement is to open the discoverer report in a new browser window and without connections page.
When we are running discoverer reports with this parameters we unwantedly get the connections page of the discoverer plus which we don't want.
Went through the documentation given in this page and followed it still the issue persists, and i see couple of threads with my issue and no updates.
This excerpt is from the documentation available in the link
" _plus_popup=true and framedisplaystyle=embedded launches Discoverer Plus in a new pop-up browser window that contains the Plus applet embedded in it "
http://www.art2dec.com/documentation/docs/oas10g1012/linux/bi.1012/b13918/urlstart.htm
and Here is what we use to invoke our reports.
http://ipaddress:port/discoverer/plus?cn=cf_123&_plus_popup=TRUE&framedisplaystyle=EMBEDDED&wb=disc_wb_1
Request the forum users from PRO discoverer group to help me out of this issue and expect a good discussion on this.
Thanks in advanceClosing the thread
We were able to achieve by changing the browser settings in the IE 8 Browser. Disabled Tabbed browsing. -
Ok, so after purchasing a new computer, with windows 7 pro, 64 bit, I tried downloading the newest iTunes, which at the time was 10.2.1 (i believe). After installation, everything seemed to work, except that iTunes was unable to securely connect to the internet, use home sharing, or validate my computer.
As troubleshooting, I first ran msconfig, and then turned OFF all programs that boot at start up EXCEPT itunes and quicktime. After a restart, i opened itunes again, and got the same result. That led me to believe that iTunes was NOT being blocked by another program on my machine. I am currently running itunes 10.7 successfully on a Windows 7 32 machine at work. Anyhow, for grins, I tried to install version 9 on the new computer, and it installed perfectly, and immediately connected to the itunes store, leading me to believe that there is nothing wrong with my software configuration (not sure if this is a safe assumption or not). I then tried to let iTunes update itself using the automated update function. It tried to update itself to the most current version, then 10.6. Again, iTunes was unable to connect to the iTunes store. I HAVE tried disabling the anti-virus software (AVG), but that made no difference.
I have since gone back and reinstalled iTunes 9. Here's the catch though. When I reinstalled using version 9, I had to redo all my library files. I'm about 1/2 way through my CD's, and now have a substantial library file going. The last time I let iTunes update itself to 10.6, once I realized that it was not going to connect to the store, I uninstalled iTunes, and reinstalled ver. 9. However, when I did this, it told me it could no longer open the library file, because it was a newer .itl or .xml (i believe it was one of those two extensions) library file. At that point, I basically started everything over again, using version 9, and have been importing CD's like a madman at night.
Here are my questions:
1) Is there a way to make a copy of the files that store my library info, so that if my upgrade to ver 10 IS NOT SUCCESSFUL, I can restore ver 9, but still have all of the album art work, playlists (when I import music, I create a playlist with the artists' name, and store things that way), etc. in tact?
2) What else can I try (firewall settings, internet options, etc.) to try and get version to to successfully install? I would really like to get all the benfits of the newer versions.
3) When I tried to get apple tech support before, they wanted me to pay a ridiculous 69$ fee for phone support. I just bought an iphone 5....this should entitle me to a fresh 90 days of phone support, right? The reason I ask here is that I could hardly understand the "tech" that answered the phone when I called for tech support last time, and to be honest, it really ****** me off that they wanted to try and milk me for another 69 bucks....I've purchased every iPhone since the 3Gs came out (pre-ordered at that), and have nearly gone broke purchasing music from their iTunes store....heck, maybe they're doing me me a favor not letting me into the store, huh?
Any help or ideas would be greatly appreciated,
-BrianMany thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?
You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/
-
What is the diff.b/w UD connect and DB Connect
Hai,
can any one expalin diff.b/w UD connect and DB connect...
RegardsHi Lakshmi,
please check the threads below
UD and DB Connect
DB connection,UD Connect Document
Also this
http://help.sap.com/saphelp_nw04s/helpdata/en/a6/c0e51914e842e19bda39dbbe4fe78c/frameset.htm
hope this helps!
Regards
Chandru -
PHP and MySQL Connection problem
I am trying to make a PHP MySQL on a remote server connection in Dreamwesaver CS3.
When I enter the information (host, user, password, etc.) and hit TEST, I get the following error message.
"Access Denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured."
I know the user, password, etc. work, as I can access the MySQL database with other software.
I checked with my host and they say there are no permission problems on their end.
I have checked the settings on the Test Server page in Site Setup and everything looks correct and works there.
I have not seen this particular problem described in other forum postings (although there are a LOT of postings on this topic!).
Any help would be appreciated.I thought my testing server was the remote server and is always on as far as I know. I don't know how to turn it on or off.
Is there some other testing server that I should be aware of?
Frank
Date: Wed, 3 Jun 2009 15:43:02 -0600
From: [email protected]
To: [email protected]
Subject: PHP and MySQL Connection problem
I know you are using remote, but is your testing server on? if not turn that on and see if that does it. it just happened to me working on remote server and could not get mysql conn to work, until I turn on my testing (developer server), then I was able to connect to mysql and the tables that I created in phpmyadmin remotly was downloaded.
> -
Difference between connection pooling and simple connection
Anybody please tell me what is the Difference between connection pooling and simple connection and also where we define connection pooling and how.
Thanks
Please reply soon
amitindiaCreating and closing connection to the database is a relatively slow process. Equally connections use database resources so you can't just open as many as you want.
A connection pool maintains a number of open connections throughout the lifetime of the application. Instead of opening and closing the connections your application just "borrows" them from the pool when they're needed.
If the pool runs out of connections it will usually create new ones as needed until you reach some predefined upper limit.
A good connection pool will also manage connections which have failed for any reason, and report code which fails to return connections to the pool (ie connection leaks).
The number of connections created at startup is referred to as the "low water mark" and the maximum number that the pool will allow to be opened at any given time is the "high water mark". If no connections are available client code will generally block until one is released.
If by "defined" you mean where can you get a working implementation then your database or application server vendor is likely to provide one. Also the Apache Jakarta Commons includes [url http://jakarta.apache.org/commons/dbcp/]an implementation which you can use with any JDBC driver.
Dave.
Maybe you are looking for
-
How to create a Formula Field that does a SQL "WHERE" statement
Hi all, I have a field (let's call it "altuser") in a report I'm creating that pulls in a key value from the users table, which is the same table that I'm reporting on. So when I'm reporting on the users in the users table, I'm pulling in the value o
-
Error Message : " No value could be determined for Customer Exit Variable "
Hello BI Experts , I have created a "ZYTD_PERIOD" Customer Exit Variable Interval Mandatory and ready for input check mark removed. The reference character is '0FISCPER' . I want to have YTD figures when the user enter single Fiscal Year Period for
-
Windows 7 64 bit install error
I have Window's 7 & I run 64 bit. Well Every single time I try to install iTunes 9.2.1 it says that part of the installation failed & it won't let my iPod nano or my gen. 5 iPod run on iTunes. So far every iPod I've tried says no then it tells me to
-
I have the newest version of itunes how do you transfer everything from my old 4s to my new iphone 5
-
How can I open a Word document, when I receive this error message "[name of document]" is being used by "another user." Do you want to make a copy? (This only occurs on the documents I have saved as .doc; the ones saved as "docx" open for me. Help!