10.4.11 Client can't Logon to 10.5.4 server but 10.5.4 client can?

Hey Guys,
I'm setting up a new server, I'm using Win2k3 AD for my users etc as there are windows clients as well as mac clients and a 10.5.4 server which hosts home directories. My Tiger clients (10.4.11 MacBooks) can't logon to a network account they are getting the error :
My leopard clients (10.5.4 iMacs) are working just fine? Anyone got any ideas? I think I heard once it was something to do with WGM; change the sharepoint string for home directories because there was something that wasn't compatible in Tiger clients like /Network/Servers should be change to just /Servers or something like that?
Any help would be greatly appreciated,
Regards,
r00tb00t

thank you for the reply!
couple more queries:
any idea on price?
and...sorry to ask this, as I presume you would have mentioned something else, but is that the ONLY solution? I am traveling a lot, away from home, for the next 6 weeks. does this mean no OS X 10.6, no itunes, until I can get the dvd in my hands?

Similar Messages

The Report Server page comes up on local server, but the page does not open from clients

Hello,
The Report Server Page opens up just fine on the local server, but page does not open up from desktops and client PCs. SSRS is installed on a Windows Server 2008 R2 server and with SQL Server 2008 R2 SP2
Clients are using IE 11 and they see:
Oops! Internet Explorer could not connect to tumdv-fsql01
How can make this site accessible from clients?
Thanks
Paul

That did not work.
What port numbers specifically does SSRS use? I will check the firewall.
http://100.100.100.100/CengeaReports/Pages/Folder.aspx
When I add the IP Address and try the link again, IE says "This page can not be displayed". When I try the Fix connection problems, IE says:
"The website is online, but it is not responding to connection attempts."
Paul

I lost my contacts and mail folders on my exchange server but they are still on my MAC. How can I resync?

I run both a MAC and a PC with two different mail clients Entourage vs. Outlook. I have never had a problem with the clients syncing with the Exchange server until I did an archive of all emails in outlook that were older than this year. Now some subfolders have disapeared on the PC and the Exchange server but still show up in Entourage. How can I resync Entourage to the Exchange and have Exchange server "accept" the Entourage folders as correct?
Also I use an Iphone and backup to the icloud. So why did my contacts disapear from the iphone and are not restored via icloud? The missing contacts also disapeared from exchange.
Iphone 4s ver 5.1.1
Exchange 2003
MacBook Pro OSX 10.5.x ( I think - since the finder->about this Mac button doesnt work)
Entourage 12.3.3
Thanks so much.
John

Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622
You cannot Delete from your Purchase history... But... you can Hide...
iTunes Store > http://support.apple.com/kb/HT4919
Note:
iCloud only Stores a Link to your Apps...

TNS error ORA-12154 : can connect to one server but not to another.

Hello,
I have a Forms 6.0 application running on a Solaris box. It connects
fine to an Oracle 9.0 server but fails with ORA-12154 when trying to
connect to Oracle 10g running on a different server.
'sqlplus' can connect fine to both servers .
'tnsping'result is succesful from the Solaris client to both servers.
Configuration details are as follows. (IP Addresses have been
sanitised. I've included the client side listener and also entries for
the 'local' Oracle 8i server running on the Solaris 'client' although
I think some of this may be not relevant):
1. Connecting to Server 9.0 : application CAN connect successfully:
a. application URL
http://host_ip_address:7778/dev60cgi/if60cgi?config=rack : application
runs successfully
b. client's formsweb.cfg excerpt:
[rack]
pageTitle=yadayada
form=login01
userid=user/pass@nn_rackspace
archive=f60all.jar, oracle_ice-4_03_1.jar
c. client's tnsnames.ora excerpt (local services not excluded):
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = sun1)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
RR =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = sun1)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = RR)
NN_RACKSPACE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 1.2.33.44)(PORT =1521))
(CONNECT_DATA =
# (SERVER = DEDICATED)
(SERVICE_NAME = QQ1.QONNECTIS.COM)
NN_QQ3 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 2.3.44.55)(PORT = 1521))
(CONNECT_DATA =
# (SERVER = DEDICATED)
(SERVICE_NAME = orcl.qonnectis.com)
NN_QQ3.qonnectis.com =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 2.3.44.55)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 2.3.44.55)(PORT = 1521))
(CONNECT_DATA =
# (SERVER = DEDICATED)
(SERVICE_NAME = orcl.qonnectis.com)
d. client's sqlnet.ora: contains ONLY:
NAMES.DIRECTORY_PATH= (TNSNAMES, ONAMES, HOSTNAME)
e. client's listener.ora excerpt:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /space/oracle/OraHome1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = orcl)
(ORACLE_HOME = /space/oracle/OraHome1)
(SID_NAME = orcl)
(SID_DESC =
(GLOBAL_DBNAME = NN)
(ORACLE_HOME = /space/oracle/OraHome1)
(SID_NAME = NN)
(SID_DESC =
(GLOBAL_DBNAME = RR)
(ORACLE_HOME = /space/oracle/OraHome1)
(SID_NAME = RR)
f. remote server's tnsnames.ora excerpt:
QQ1.QONNECTIS.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = qanasta1.qonnectis.com)
(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = QQ1.qonnectis.com)
QQ1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)
(HOST = qanasta1.qonnectis.com)
(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = QQ1)
QQ3.QONNECTIS.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 2.3.44.55)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl.qonnectis.com)
g. remote server's sqlnet.ora contains only:
NAMES.DEFAULT_DOMAIN = qonnectis.com
NAMES.DIRECTORY_PATH= (TNSNAMES, ONAMES, HOSTNAME)
h. remote server's listener.ora excerpt:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)
(HOST =qanasta1.qonnectis.com)
(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /opt/oracle/product/9.2.0.1.0)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = QQ1.qonnectis.com)
(ORACLE_HOME = /opt/oracle/product/9.2.0.1.0)
(SID_NAME = QQ1)
i. on Solaris client, tnsping nn_rackspace : succeeds
j. on Solaris client, sqlplus user/pass@nn_rackspace: succeeds
k. on server, Oracle server processes have names like ora_d000_QQ1.
l. on server, Oracle connected listener processes show up in ps
listing like oracleQQ1 (LOCAL=NO)
m. On server, lsnrctl status reports amongst other things
Service "QQ1.qonnectis.com" has 2 instance(s).
Instance "QQ1", status UNKNOWN, has 1 handler(s) for this service...
Instance "QQ1", status READY, has 1 handler(s) for this service...
2. Connecting to Server 10g : application does NOT connect successfully:
a. application URL
http://host_ip_address:7778/dev60cgi/if60cgi?config=rack2
b. client's formsweb.cfg excerpt:
[rack2]
pageTitle=yadayada
form=login01
userid=user/pass@nn_qq3
archive=f60all.jar, oracle_ice-4_03_1.jar
c. client's tnsnames.ora excerpt (local services not excluded):
-as above-
d. client's sqlnet.ora: contains ONLY:
-as above-
e. client's listener.ora excerpt:
-as above-
f. remote server's tnsnames.ora excerpt:
# default sid 'orcl' : for local access
orcl =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.qonnectis.com)
# QQ3_Vlan : default sid 'orcl' : access over 10. private net from qq1
QQ3_VLAN =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.99.99.99)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.qonnectis.com)
# nn_qq3 : default sid 'orcl' : access from external sites by public
# external IP - specifically sun admin dba tool in twx
NN_QQ3 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 2.3.44.55)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.qonnectis.com)
g. remote server's sqlnet.ora contains only:
NAMES.DIRECTORY_PATH= (TNSNAMES)
NAMES.DEFAULT_DOMAIN = qonnectis.com
h. remote server's listener.ora excerpt:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/OraHome_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = orcl)
(ORACLE_HOME = /u01/app/oracle/OraHome_1)
(SID_NAME = orcl)
i. on Solaris client, tnsping nn_qq3 : succeeds
j. on Solaris client, sqlplus user/pass@nn_qq3: succeeds
k. on server, Oracle server processes have names like ora_d000_orcl .
l. on server, Oracle connected listener processes show up in ps
listing like oracleorcl (LOCAL=NO)
m. On server, lsnrctl status reports amongst other things
Service "orcl" has 1 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this
service...
Service "orcl.qonnectis.com" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
As you can see, I have tried adding an alias for the default domain
name suffix '.qonnectis.com' in the tnsnames.ora files on the solaris
client and on the new 10g server.
Just to add to the fun, the 'new' server running Ora 10g CANNOT connect
to the old server running Ora 9:
sqlplus user/pass@nn_qq3
sqlplus user/pass@nn_qq3.qonnectis.com both fail.
While the old 9.0 server CAN connect to the new 10g one:
sqlplus user/[email protected] succeeds.
Sorry this is such a mess. TBH I find this whole area extremely
confusing.
All suggestions welcome. Unfortunately I am away on holiday next week
but will follow up any leads when I get back.
thanks!
Victor Churchill.

Hi DianeinBirmingham,
Welcome to the Apple Discussions
The Log goes further
Chat ended with error -8
Video Conference Error Report:
Video Conference Support Report:
Video Conference User Report:
Binary Images Description for "iChat":
This bit suggests the ports are not open.
Intermittent success like this And the ports not being open suggests a Modem that might be SIP aware such a Thomson-Alcatel Speedtouch device.
Can you tell us what modem you have ?
7:55 PM Friday; July 13, 2007

Website appears on server, but can't access from other computers

I migrated from Server 10.5 to Snow Leopard Server. Used the migration tool to bring everything over from the previous box.
I can access the website via browser from the server, but can't access it from any other computers. I'm a decidedly non-geek type, so too many settings are gibberish to me. However, I at least ran the previous server for many years without problems.
Any clues as to what I'm missing?

What error message(s) are you getting from the remote web browser clients?
Exactly what string are you typing into the address bar of the web browser?
Are the remote clients on the same LAN as the web server, or on a remote network?
If running, is the firewall open for port 80 or port 443 for the web server?
Knowing a little more "gibberish" helps when you're running a server, too.

How can SQLDeveloper connect to 10g DB on server but UI cannot

How can SQLDeveloper connect to 10g DB on server but the User Interface on local laptop cannot? What does the UI need that SQL Developer doesn't need?

What kind of UI are you talking about?
SQL Developer can use different type of connection method to connect to Oracle database.
For example, basic method of SQL Developer is JDBC Thin connection, in which case, SQL Developer will use JDBC driver that come with it, don't need any other thing installed.
SQL Developer also can use TNS method which will require Oracle client installed and TNS names configured.

Solution: View distorted logon page from remote unix server.

This problem is a bloody f*cking headache which I spent days searching this and other forums for a solution trying this and that ... f*cktype problem. I just thought writing this so that somebody out there having same problem can benefit from this.
This is the solution if you have problem trying to use another unix ws or server to do startconsole but you get distorted image at the logon page or you cannot type any entry in the fields to logon to server.
The symptoms are: at the ias console located in the datacenter I can logon, but remotely on my ultra1 I cannot even when all the access permissions and IP addresses for remote administration have been specified.
For my setup I have a couple of ias server at remote which I tried to manage using a small ultra1 ws which I only installed the "base" admin tool namely startconsole.
Initially I tried doing "xhost +" on the ultra1 then telnet to the ias server at remote and 'export DISPLAY' that didn't work as somehow the java didn't display up properly. So thats why in the end I installed the tool for startconsole.
Firstly when trying to logon to remote server ensure the correct administration url of the remote ldap, this can be found under < */iplanet/ias6/admin-serv/config/adm.conf >
check for the "ldaphost : "
Then ensure that this entry is stored in your dns or remote server /etc/host file.
Solution:
The reason why I saw distorted image logon during "startconsole" was because of some missing files on my ultra1 under <*/iplanet/ias6/java/jars/ias60*> somehow during installation on the ultra1 those files were missing as part of the installation. I copied those files from remote ias servers and put them in the ultra1 and everything came up properly.
==================================
some troubleshooting steps which I used.
==================================
startconsole -D # debug mode
truss startconsole # more debug
startconsole -x nologo # starts console with the iplanet logo.
startconsole -x nologo -u "cn=Directory Manager" -w <password>
testing logon password at remote ias server using ldapsearch(can help narrow down if passwords are having problems or not)
============================================
ldapseatch -D "cn=Directory Manager" -w <password> -b o=netscaperoot cn=admin-serv-<host>

This problem is a bloody f*cking headache which I spent days searching this and other forums for a solution trying this and that ... f*cktype problem. I just thought writing this so that somebody out there having same problem can benefit from this.
This is the solution if you have problem trying to use another unix ws or server to do startconsole but you get distorted image at the logon page or you cannot type any entry in the fields to logon to server.
The symptoms are: at the ias console located in the datacenter I can logon, but remotely on my ultra1 I cannot even when all the access permissions and IP addresses for remote administration have been specified.
For my setup I have a couple of ias server at remote which I tried to manage using a small ultra1 ws which I only installed the "base" admin tool namely startconsole.
Initially I tried doing "xhost +" on the ultra1 then telnet to the ias server at remote and 'export DISPLAY' that didn't work as somehow the java didn't display up properly. So thats why in the end I installed the tool for startconsole.
Firstly when trying to logon to remote server ensure the correct administration url of the remote ldap, this can be found under < */iplanet/ias6/admin-serv/config/adm.conf >
check for the "ldaphost : "
Then ensure that this entry is stored in your dns or remote server /etc/host file.
Solution:
The reason why I saw distorted image logon during "startconsole" was because of some missing files on my ultra1 under <*/iplanet/ias6/java/jars/ias60*> somehow during installation on the ultra1 those files were missing as part of the installation. I copied those files from remote ias servers and put them in the ultra1 and everything came up properly.
==================================
some troubleshooting steps which I used.
==================================
startconsole -D # debug mode
truss startconsole # more debug
startconsole -x nologo # starts console with the iplanet logo.
startconsole -x nologo -u "cn=Directory Manager" -w <password>
testing logon password at remote ias server using ldapsearch(can help narrow down if passwords are having problems or not)
============================================
ldapseatch -D "cn=Directory Manager" -w <password> -b o=netscaperoot cn=admin-serv-<host>

I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server

I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server, despite following the Systemline instructions that impy this can be done.
Can anyone please advise what I am doing wrong?

Hi LowLuster
Thanks for reply. I am not an expert on these sharing protocols but I think I have turned on SMB sharing but still wont connect. I tried adding netwrik drive by using cntrl K in finder and using smb\\network address but nothing. It is driving me mad!!

Can we do a fresh install of TES 6.2.1 on a new server, but point to an database currently used by the older version (v5.3.x)

The current database is 2.5 gb, but it is already on SQL Server 2008, and doesn’t need to be upgraded.
In reading the documentation, it looks like the installer can install a fresh copy, which I’m assuming creates the requisite tables in the database. It can also update an existing install, along with updating the database table structure. What we weren’t sure of was if it could do a fresh install on a new server, but point to an database currently used by the older version of tidal. It does say ‘The database modifications are performed when the master is first started after the installation.’ in the upgrade section of 6.2.1 Quickstart Page 6-5. Hopefully that works regardless of if it was an upgrade or a fresh install.

We worked with one of their partners gssinfotech to create a custom runbook for "upgrade in place"
I think you might have to go to SQL2012 with 6.2.1 (there's a ton of benefits like always on that make BCP/DR with Tidal very smooth.) We've been Tidal 6 /SQL2012 for a while now so I forget. we're about 80% done with our 5.3.1 conversion
We restore our 5.3.1 admiral database to a sandbox SQL2012 server, run some cleanup script (if not upgrade in place, don't forget to set queue to zero and disable all jobs)
We installed a tidal Master then run every major rev and point to that database. (6.0,6.1,6.2,6.2 sp1)
The database gets upgraded during the process (we have some trouble with our "older" 531 so we do the same thing each time)
We then can use transporter to transport "legacy" 531 jobs to our pristine Tidal 6.2.1 (non-prod ) environment so we can take advantage of mapping files, etc. to switch things as needed
This gives a lot of flexibility to moving things in when one piece or job set at a time.. we use it to move job frameworks into nonprod Tidal 6 so that developers and other groups can review / asses / rewrite / test / their jobs on tidal 6.
Marc

I have a macbook pro can can log into a server, but my new iMac with lion can't even see the server--both are over wifi- how do i get the new iMac to see the server?

i have a macbook pro can can log into a server, but my new iMac with lion can't even see the server--both are over wifi- how do i get the new iMac to see the server?

Without knowing what you have tried please open System Preferences - Sharing - File Sharing and select File Sharing. If you still have trouble you can call AppleCare in the morning when they re-open. You have 90 days of telephone support if you haven't already bought AppleCare.

What can I do when web pages with scripting display ok from a server but not locally?

I have html and java script in the same folder path, both on a server and locally. The pages display correctly when accessed from the server, but not when accessed locally. Is there a change I can make to Firefox to solve this problem?

An address starting with c: wouldn't be any kind of domain name. C: is the drive lettering system DOS and and later uses. By default, A: and B: are reserved for your first and second floppy disk drive. All hard drives are then named C: through Z:, if you have that many. C: is normally your startup disk.
Anyway, their PDF file is incorrectly linked to a file directly on the C: drive of someone's computer. It's not going to work no matter what you do.

Encryption is required to connect to this server but the client library does not support encryption

Hi ,guys
I came cross a trouble when I configured connection encryption.
I met the following problem when I have configured connection encryption done.
Encryption is required to connect to this server but the client library does not support encryption; the connection has been closed. Please upgrade your client library. [client: ip]
environment info:
SQL:SQL2008 \SQL2005\SQL2008R2
SERVER:WIN2003 \WIN2008R2
We use C# to develop asp.net webform app, so the provider I use should be SQL client.
client .NET Framework version:NET Framework 3.5
Pls tell me why I met this weird problem.
Thanks in advance.
Love SQL

Sure,here is the connetion string of java app.
jdbc
db.url=jdbc:jtds:sqlserver://60.x.x.x./TaskSiteInfo
db.username=xxx
db.pwd=xxx
Your initial post stated you were using SqlClient in an ASP.NET 3.5 app. I think this is an issue with the jTDS client based on the error message. Are you using the latest jTDS driver? If so, try posting this issue to
http://sourceforge.net/p/jtds/discussion/
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

Can not communicate any with Server, BUT I CAN CONNECT SUCCESS FROM "MANAGE SITES"

I can NOT see Server Files in dw cs6 , so i can NOT upload/download or communicate any with Server, BUT I CAN CONNECT SUCCESS FROM "MANAGE SITES"...WELL WHERE THE PROBLEM?

From the File view pop-up menu, choose Remote server

Just got Mac book pro. I can't connect to office remotely thru the remote window. My office is window based and I have no problem connecting while at the office thru the server but cannot at home. Any help would be appreciated!

Just got Mac book pro. I can't connect to office remotely thru the remote window. My office is window based and I have no problem connecting while at the office thru the server but cannot at home. Any help would be appreciated!

This what my IT replied with:
That teh MacBook cannot connect with RWW because it requires Active-X to connect. That MAc browsers (Safari) do not use Active-X but only Windows (IE) uses Active-X control.
It would seem to me that there must be a way around this. Any help?
Thanks,

I have a update waiting and the box that says software update trys to connect to the update server but it can't do you have any help for me cause its saying i need this update real bad

firefox says i have a update waiting but i try to install it and the software update box pops up and says (connecting to the update server) but thats as far as it goes can you please help me solve this issure

Remove the files in the updates and updates\0 folder.<br />
You may need to delete active-update.xml and updates.xml as well if present.
XP:
C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox)
* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
If you have problems with updating then best is to download the full version and uninstall the currently installed version.
You may need to remove the Firefox program folder to do a clean install of the new version.
Do a clean (re-)install:
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
* It may not be necessary to create a new profile, so first try if it works with your current profile and if not then create a new profile.
You do not need to create a new profile, that is not necessary for this issue
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

10.4.11 Client can't Logon to 10.5.4 server but 10.5.4 client can?

Similar Messages

Maybe you are looking for