10.4.11 Combo updates from what version ? Webpage mistake

The central 10.4.11 site
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
lists below system requirements 10.4.4 or later.
The "10.4.11 detailed information site"
http://docs.info.apple.com/article.html?artnum=306297
lists "The combo update for Intel-based Macs updates Mac OS X (Intel) 10.4.6, 10.4.7, 10.4.8, 10.4.9, or 10.4.10 to 10.4.11"
What is correct ?
Thanks WH

Hi,
I'm not 100% sure but the combo intel update is for 10.4.6 and up... that's what I saw in numerous websites not only from apple, that 10.4.4 minimum was the first one I saw until now.

Similar Messages

Combo update from 10.5.2 to 10.5.5, Final Cut Express v. 4.0 affected?

Hi,
So, my question is will my current version of Final Cut Express 4.0 (bought it pre -installed with my iMac) also have to be updated if I do the combo updated from OS 10.5.2 to 10.5.5?
If so, is this a free update?
Should I update FCE before running the combo update?
Thank You

^^^
The only reason i might be updating is because I'm getting Pro Tools LE to learn about their new features. And they highly recommend installing it on 10.5.5.

Clients not getting Combo updates from server

I will try to explain the problem with my limited English knowledge.
My software update server works. The clients already update from it.
My server has downloaded and enabled the incremental AND combo 10.7.4 updates.
My clients have 10.7.3 and they can get the incremental update to 10.7.4.
When i choose to serve only the combo update from my server (by deselecting the incremental update) the clients think their software is up to date.
For some reason i am certain if my clients hade ≤10.7.2 OS everything would work fine.
Any solution?

I was able to solve it in the end. I had an ACL on Core Switch blocking traffic from AP to/fro WLAN/WLSM Switch. The initial traffic goes through the AP's and access switch (authentication and broadcast) to WLAN/WLSM switch through Core, thereby blocking layer 3 traffic and not layer 2 (authentication).
You might need to check your radio on your client (a = 5. Ghz or b/g = 2.4Ghz) to see that it corresponds to what is configured on the AP.

Re-apply the Mac OS X 10.4.9 combo updater from an alternate startup volume

Most instructions that I have read say:
" Re-apply the Mac OS X 10.4.9 combo updater from an alternate startup volume. "
( Yep, I got the security update blues: which makes me always wonder if Apple programers can program an updater they should also program an uninstaller. )
However I do not have a alternate startup volume and I do not want to do that firewire thing by using another Mac.
After I insert the CD that that has the 1049 combo updater in my iMac20 drive can I install the updater from my eDrive ( TTPro 4.5 ) ?

I do not have a alternate startup volume
Then, just reapply it on the hosed startup volume. I know nothing about eDrives, but just copy the COMBO updater from the CD to the IMac and run it from there.
Your reluctance to use external FWHDs for bootable backups/clones severely limits your ability to restore the OS back to its previous incarnation. See http://www.macmaps.com/upgradefaq.html and http://www.thexlab.com/faqs/installswupdates.html for developing a proper strategy.

Cmd+Option Start iMovie trash pref file - From what version ?

Hi
Cmd+Option Start iMovie trash pref file - From what version ?
As I see it - it must be a New Feature to iMovie'13 (vers. 10.0.x) or does this work long back in time ?
To set iPhoto right - has been working for quite a while - but reg iMovie - Anyone knows ?
Any other program that can be cured this way ?
Yours Bengt W

You need iDVD to make a video DVD.
Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673
To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

How the client machine could to get the combo update from SUS?

Hi everybody!
How the client machine could to get the combo update from SUS? My SUS working for clients comp and showing the Mac OS X 10.6.5 Update - not Combo Update (Combo Update downloaded also and I can see it in Server Admin)! But I would like to install the Combo Update - is it possible? How I can get the Combo Update if it is not shown in the list?
Thank you in advance!

You can download the Combo manually from Apple.
http://support.apple.com/kb/DL1324
http://support.apple.com/downloads/DL1324/en_US/MacOSXUpdCombo10.6.5.dmg

Issue after 10.7.5 combo update from 10.7.4

10.7.5 Combo updater has messed up up all 3 iMac 3.4GHZ i7 SSD 16GB Ram I upgraded from 10.7.4.
-The worse nightmare of all:
Spotlight has become DEAD slow to index main boot SSD with only 45gb used 203 free, it shows 3 days with 10.7.4 it was doing it in less than 10 minutes.
I killed and relaunched spotlight, cleared old index, set only Boot drive marking all other drive including Timemachine with PRIVACY and tried most of the trick, same issue on the 3 computers I can't fix it. (Reset PRAM,Repair Perm run Diskwarrior, Reapplied 1075 combo)
Therefore Timemachine is also now veryslow when Spotlight is trying to index the main drive (even after excluding all drive and timemachine via Privacy)
- In the dock all shortcuts for folders and file from my NAS are becoming faceless with a question mark after each restart. Clicking on them re-activate the icon until the next restart. (DiskStation DS212+ Synology connected via AFP), Synology might have to update their software, I guess.
- Fast User Switching is activated by default top right of menu bar, it can be cleared via User& Group, clicking on Login Option and deslecting Show fast user switching menu.
Any one having problem with spotlight ? Solution welcome.

Same here, in my case:
1. My iTunes works slower than before, it took a while to completely sync my iPhone4s. And try to update the apps, no response after clicking the "download all free updates" as if nothing happens
2. Safari, Try to open a web site, let say www.apple.com.........it didnt load the full site entirely on the first attempt, i always hit the refresh icon to make the job done
3. Last but not least, this completed my nightmare, i've upgrade all of my idevices into iOS6(iTouch 4G & iPhone4s), Siri seems having some problems in answering my questions.....or maybe because of my provider connection, and it freeze when i try to update some of my apps direcly from the phone, luckily iOS6 didnt compatible with my 1st Gen iPad, so i can write this issue into this forum.

Muse crashes every time I try updating from web version.

Every time I load my muse file and it tries to update from the web version, it crashes. Is there a fix for this?

Thanks for the quick response.
Yes, on Google Drive.
I just your answer to a post involving this after I posted this one, about it corrupting the file while syncing.
I went back and downloaded a previous version of the file from Google Drive and all works fine now.
Thanks for the solution!

Firefox 4 does not work on my G5. After prompting me to update from previous version I am now left with nothing functioning. How do I go back?

After downloading the latest update Firefox kindly told me I should upgrade to V4. So I did. I downloaded it, dropped it into my applications folder and overwrote the old version. Only to be told when attempting to start the application "Firefox does not work with this architecture".
Brilliant. So I look for an older version on the site, and there is nothing to be found. Just the insistance that I should download version 4 for my Mac. Well, "IT DOESN"T WORK GUYS!"
Now can we have a fix please quickly or a link to the older version, as I am now left without all my bookmarks or passwords and you are about to effectively isolate a section of the computing community from ever using you again.

For your toolbars that you had installed before, are they simply incompatible with the latest version of Firefox?
Please try reading [[Add-ons are disabled after updating Firefox|Add-ons are disabled after updating Firefox]], as that may help with your addons.
As for Firefox running slow, is it slow lading web pages, or is just the whole browser slow? Try reading [[Firefox is slow|Firefox is slow]] , which may have some tips (the optimize Windows part especially).

OS 10.2.1 Update (from OS version 10.0.9.2372 to 10.2.1)

Hi,
I just bought the Z10 unlocked, model STL100-3, . It is currently using OS version 10.0.9.2372. When I go to Software Updates, it says the latest version is 10.1.0.4184. Do I have to install this middle version before I can update to the newly released 10.2.1 version? Why is it not saying 10.2.1 is the latest version? I currently do not have a microSIM, so the phone technically has no carrier.
Thanks

Hello BBUSER8
Welcome to http://supportforums.blackberry.com/
Here is your operator still has the version 10.1.0.4181
So has released the 10.2.1.537
Find out what your country operator has released the 10.2.1
I would recommend you do a direct update to 10.2.1.
Regards.
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

Aperture 3.4.5 - update from previous version not working

Hi, I have updated Aperture to 3.4.5 via the App Store update and now it won't startup correctly. I get this...
I started with Aperture 2 via disk install and then upgrade to V3 via the App store, all other updates have worked fine.
Any ideas guys?
I can use Time Macjine to go back a version and get things working again but this is preventing any further updates and enhancements from being applied.
Thanks.

In previous versions of Aperture it helped to trash it and to install it again from the App Store (don't empty the Trash), when Aperture was asking for the serial number.
I don't know, however, if it will still help with the new AP 3.5.

Simulation version getting updated from active version

Hi all,
We noticed that in Active Model 000, existing Simulation Versions are getting updated (changed) daily, even though we do not know any job scheduled by us which could do such update. I tried to search for any job running at the time of version change, but could not find through SM37.
Can you guess what could be triggering this change?
Regards,

Hi,
You can see the difference in master data between planning versions. Select 2 planning versions with the Ctrl key, select Additional Functions then Master Data Comparison. Run wide open and check the log. Compare 001 and SM1 then 000 and SM2. Just a thought.
I don't think transactional data differences would affect the "Last Changed" field.
Best Regards,
Mike

VMM 2012R2 - Update from RTM Version to UR5?

Hi all, we've got the RTM version of SCVMM 2012R2 running in our environment (3.2.7510.0) and am looking to get this software up to date. I see that UR5 was released in February. Is it wise to update right to UR5 or should I step through the rollups? What
precautionary steps should I take before doing the rollup installs? Backup the VMM database? Anything else? Any feedback appreciated.

You do not need to step through all of the rollups, no - you can go directly to UR5. It will contain all the fixes for the prior URs.

OS X Server 3.0.1 freezing when updating from previous version

When I try to open server after upgrading to 3.0.1 the window cames up saying Server is being updated on this mac, but after 3 hoursi is still stuck (SEE SCREENSHOT BELOW) I have rebooted but still TNA.
Anyone have a clue?
Thanks

Microsoft Outlook has been a longstanding issue with this behavior.
As for changing the settings, here's how I usually do this. The postconf -e command shown over in that earlier thread will likely require tweaking as Mavericks has moved the configuration file. You'll need to add the -c switch with the current configuration file location to the postconf command, as Server.app has stashed away its own copy of this file.
sudo postconf -n -c /Library/Server/Mail/Config/postfix
sudo postconf -c /Library/Server/Mail/Config/postfix -e "smtpd_helo_restrictions = permit_sasl_authenticated reject_invalid_helo_hostname reject_non_fqdn_helo_hostname"
Which will allow (only) authenticated users to bypass the HELO checks. What's shown here also differs from that earlier thread as I'm not allowing unauthenticated local access here. Then restart the Postfix server with:
sudo postfix reload
I'll report that article to the  hosts.

Firefox 7 will not open in win xp, after being updated from previous version

updated to firefox 7 on win XP. now firefox will not open.
I unstnstalled firefox 7, and re-installed again, but it will not open

I have the same problem (and with Mozilla Thunderbird) running with Windows Vista OS. The non-opening problem was preceded by a long period where Firefox and other programs were taking absurdly long times, such as one minute, to open. Starting Windows in "safe mode with networking" solves the problems. Similarly, I just found that If I run msconfig.exe and select "diagnostic startup" then Firefox and Thunderbird both start and start up really fast (that is, when most services and startup programs are prevented from starting). However there is no network so they do not connect. I then turned on (in msconfig) enough processes to get networking running and Firefox and Thunderbird still start up really fast.
I am fairly certain there are no viruses on my computer, so the only other possibility is that some program/registry-entry is preventing the OS from working properly. The problem with windows that it is virtually impossible to find something like this, since the Windows OS has very weak self-diagnostics, and the registry is absurdly complicated with over half a million entries on my computer.
If you can do a "repair install" then this will probably fix the problem, but I do not think that Vista has this feature. Alternatively an upgrade of the OS might fix it, such as from Vista to Windows 7.

10.4.11 Combo updates from what version ? Webpage mistake

Similar Messages

Maybe you are looking for