10.4.11 or my PowerBook? PLEASE HELP!

OK, so I'm trying to take this in stride. I ran the 10.4.11 update as the grouped download update b/c Safari wouldn't start after running the regular software update. The computer restarted and now gets stuck on the Mac OS X loading page (where the blue line usually fills up). It gets past the spinning wheel and basically just stops here. This has never happened before. I tried starting in safe mode, but that didn't seem to work. Incidentally, my computer was on mute before, so I can't hear any restart tones.
I'm a grad student heading into finals and need to get on here desperately. Any help would be greatly appreciated.

I'm a grad student heading into finals and need to get on here desperately. Any help would be greatly appreciated.
This is what I keep reminding people. Don't update your system if you don't have time to possibly troubleshoot the system too. Upgrading should only be done when you need it for software compatibility, and you are prepared to upgrade. The fact you are asking for help suggests you didn't backup your data. Go through my backup FAQ* and look at ways to restore your data:
http://www.macmaps.com/backup.html
Then we can troubleshoot why your machine won't startup. In general you should always follow these directions* when updating your machine:
http://www.macmaps.com/upgradefaq.html
Let us know when you are satisfactorally recovered so that in even you have to replace your hard drive, you won't be put back too much. That would be the last resort solution, but we need to troubleshoot all possibilities from the small to the big until we find out what is causing your problem.
- * Links to my pages may give me compensation.

Similar Messages

My old mac powerbook g4 wont boot up, it wont show apple logo and spinner aswell just stuck on grey screen while booting please help me

i have a old powerbook g4 which i usally use to store some photos and to listen music. the battery of my powerbook is completly dead so i used to use my powerbook using charger adapter so whenever my power cuts down my laptop will be shutdown.
one day i had just bootedup my powerbook and some date notificateion poped up so i press enter and suddenly my power went off and laptop shuted down. and next time when i tried to boot its stuck at grey screen , i even cant reach the apple logo and spinner. please helppp me :!!!!!!!!!!!!!!!

Resetting PRAM and NVRAM is not working
and i cann't boot it on safemode holding shift button and while holding option or c button at startup i can only see three things 1 is refresh button, 2 macintosh HD with X under it, 3 arrow forward button please help me

G4 Powerbook Hard Drive Problem - PLEASE HELP!!

I have a powerbook G4 15 inch alu. It is running OSX version 10.4.11
My system profiler tells me I have a 74.5GB hard drive with 69.34GB used, but I had wiped the HD in September 2008 and reinstalled the OS and few other programmes and files, so this shouldn't be the case at all.
I have found that my the problem is with my Users folder - within Users, my user account (the main account, I have another account setup so my mum can use her iPhone) has 67GB used. But when I go into my user account (clicking through the icons, after double-clicking the MacintoshHD desktop icon), none of the folders within my account run to anwhere near 67GB. Totalled, they come to around 10-15GB at most. There's a good 50GB or so of hard drive that just seems to be missing.
I ran Drive Genius to repair permissions and that eliminated a couple of GB of this 'missing space' but no more than that. How can I go about finding and reaccessing my lost hard drive space?
FWIW - I reinstalled the OS in September because this was my University laptop and the result of 4-5 years use had resulted in loads of unwanted files. I saved the important stuff to discs and then reinstalled because it was much easier (I thought) than trying to find and get rid of all the unwanted stuff.
Please please help. At the moment, the computer is running fine if a little sluggishly (understandable given how much of the hard drive is 'used'), but I had a nasty experience earlier this year with my G5's hard drive crapping ut and really don't want to end up in the same boat with this one. I also need that extra space back so I can use some programmes I can't install or work with as things stand.
Many thanks for taking the time to read this and respond, I don't know enough about computers to have any clue as to how to proceed, so your help in this matter would be greatly appreciated.

eww - will do and report back.
cornelius - apologies for the ambiguity there. Hope this clears things up a bit:
Users folder = get info says 69.34GB used
Double-click on the Users folder and I get three folders - the shared folder, my mum's account folder, and my account folder. My account is the main/master account.
The shared folder is empty. My mum's account folder has a couple GB used, mine has 66.5GB used.
I double-click on my account folder, and get icons/folders for Desktop, Library, Movies, etc (the usual stuff). When I do Get Info for each of these, the sum of GB used by them is about 10-15GB, nowhere near the 66GB supposedly used.
If it helps any, the File System is Journalled HFS+
S.M.A.R.T. status is verified, and Drive Genius, Disk Warrior, and Disk Utility aren't picking up anything bad other than the corrupted permissions I repaired prior to making this post. Repairing permissions only freed up a few GB more space, still got 50 missing GB to locate and free up. Or start saving for a replacement HD, but if this is a sign of a crash, I'd rather know now so I can plan for that.
Many thanks to both of you for responding so quickly - hopefully this problem is solvable.
It doesn't make sense, there's nothing else which could have used those 'missing' GB. And, as I only reinstalled everything in September I know there's no way the few programmes I've added and 10 or so CDs I've copied onto the G4 could account for the missing 50GB. My HD should have most of its space free - minus the space used by OSX, any OSX updates, and literally a handful of small apps and files.

PowerBook G4 17 won;t start after upgrading Hard disk Please help!

Hi Folks! need your help in order to diagnose aPowerBook G4 1Ghz Serial V731556CMVZ. It worked perfectly untill start to have problems with hard drive. I bought a new Seagate Momentus 7200RPM and followed the instructions ifixit.com without any problem.
After finishing, the PowerBook won't start. I can not hear any noise form HD, or SuperDrive, no startup chim sound.
I disasembly and assembly again the PB and nothing. I try to reset PRAM SHIFT CTRL ALT POWER and nothing.
It's frustrating. Please Help!

I would make sure the keyboard ribbon is squarely seeded and in the right position. That clip is extremely tiny and fragile. Any damage to it whatsoever could cause major issues. Did it fracture at all during the installation process?

Can I use my iphone 4 with Powerbook G4? It wont let me. Please help!!!

Hi all!
I've just opened my new iphone and tried to connect it to my powerbook g4 but it say that 'the iphone can not be used as it requires Mac OSX 10.5.8 or later'. My powerbook currently has 10.4.11. I've checked for updates but my Mac say I'm up to date.
Is there any way around this? I will be so disappointed if not as all my music ect is on my powerbook.
Please Help!!!!!!

As already provided, the iPhone 4 requires 10.5.8 or later.
This is included with the iPhone 4 specs via this link, and on the retail sales box.
http://www.apple.com/iphone/specs.html
10.5 is not a free update just as 10.4 was not a free update over 10.3.

Need Major Help! Powerbook G4. PLEASE HELP

I have a Powerbook G4 running OS X 10.5.8 and for some reason I can't get it to lanch apps or anything. The finder got corrupted and I've tried everything to get to disk utility but I can't. I tried safe mode. So I figured I might just make a partition on an external drive for my mac and lanch it off this copy of my HD I made a while back. It's in .hfs format. It used to be a .dmg but I was wondering since I (Sorta) don't have a restore disk if I could mount it to a mac partiontion launch my mac from that and fix the finder file. How can I do this? I also have a .iso I got online of the restore disk but I'm not sure it's the right one since they have .exe's on the disk. Not really complying with the info I used to remember about my disk. Please help.

I think you want a bootable clone. PPC Machines (G4,G5) need FIREWIRE drives) Intel Machines can use USB and Firewire drives.
I have a Powerbook G4 and use both SuperDuper and Carbon Copy Cloner for backups.Below are some links to give you more information about the advantages of a bootable clone backup.
http://www.bombich.com/index.html
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
http://www.cultofmac.com/48861/how-and-why-to-clone-your-mac-hard-drive-macrx/

I am unable to get itunes to run on my powerbook g4. Please help!

My sister gave me her old powerbook g4. She erased the hard drive and relaoded the software. I cant get itunes to open or run. It said i needed quicktime so I downlaoded it from the apple site but it still will not run. Am I doing something wrong? Is there a different download that I need? Please help. I am new to apple computers so please be paitcent with me.

Your computer may need a series of updates to bring it up to speed with the last versions of software supported by 10.4 Note that these will themselves be several years old since Apple hasn't supported Tiger for several years. In particular you cannot upgrade to the newest iTunes or use any brand new i-devices on a computer running 10.4
One way to do updates is to run Software Update. Do the updates one by one since trying to do many at one time often results in problems. Use Disk Utility to repair permissions before and after.
For general Tiger update questions I suggest you post on the Tiger 10.4 forum. As for iTunes, the newest version you can run is 9.2.1 available at
iTunes 9.2.1 (the newest that will run under Tiger) - http://support.apple.com/kb/dl1056

Powerbook will not start up. Please help!

When I turn on my powerbook the grey apple logo appears and the pin wheel appears for about 30 seconds.The it turns off. Please help. I have tried everything to restart it.
I want to cry

http://docs.info.apple.com/article.html?artnum=300552

Have a PowerBook G4. I mistakenly hit a key (don't know what) that changed the entire keyboard into either typing numbers only or nothing at all. Please HELP...

I have a PowerBook G4, 10.4.11. I mistakenly hit a key (don't know what) that changed the entire keyboard into either numbers only when typing or nothing at all with half the keyboard. Please HELP...

Thank you TONS a brody. Really appreciate it.

IPOD not being seen in ITunes...I have tried everything - please help!!

Okay, so I have tried everything listed on Apple's website to get my IPOD to be recognized in ITUNES. When I plug my IPOD into the USB port, the "do not disconnect" screen pops up. Nothing happens in ITUNES. Windows Vista pops up and says "Do you want me to scan and fix the IPOD F: drive?" Either selection doesn't do anything. I have tried the 5 R's from apple. I have tried to download every update available etc. I have tried to even go in and update the driver. However Vista is telling me that I have the most up to date version of everything. When my IPOD isn't connected to the PC, everything seems normal - except for the fact that there is no music or anything on it. But all menus are available and accessbile. Can anyone suggest what to do here? I am at a loss. Please help!! Thanks.

Yes, I'm having the same problem. If I connect my iPod to my laptop while iTunes is open, the 'Do not disconnect' sign appears, the battery does not charge, and my iPod doesn't appear either in iTunes or on my desktop. Since it doesn't appear in either of these places, I have to ignore the 'do not disconnect' sign and disconnect anyway. If I then reset my iPod, quite iTunes and reconnect iPod to laptop, everything's fine - iTunes opens, and recognizes the iPod. I guess this isn't the end of the world, since I can simply avoid ever connecting my iPod to my laptop while iTunes is open, but is this normal?
PowerBook G4 Mac OS X (10.4.9)

Managing multiple sites in different iWeb versions - PLEASE HELP!

apnewbie/cyclosaurus/roddy/old toad (and any others more knowledgeable than i):
i've run into a bit of a pickle. i am hoping someone can help straighten me out. i am about to jump out of a window. here's the rundown:
(for starters, i have a .mac account and am publishing to .mac.) i created a site in iWeb 1.1.2 on my work computer (mac book pro). worked great, really lovely. thought to myself, "hey, i'd like to create another site from home, but i don't have iWeb at home (powerbook G4) - i should buy iLife 08 so i can build these things from home and not have personal files on my work computer."
so: i had a site that i created within 1.1.2 with files written to iDisk. i purchased iWeb 08 and would like to have another site, but this one is being created in 2.0. i also am using a personal domain name this time around bought with google apps and hosted by godaddy. i published the new work in progress for a test run and...you guessed it...my original 1.1.2 site was rewritten by the 2.0 site. and the 2.0 site comes up as the standard google search page for domains that aren't up and running. whooopsie.
sorry for the lengthy intro, but that's the background. i guess my specific questions are:
1) i want to be able to maintain multiple sites from iWeb 2.0...can i open my 1.1.2 domain file in 2.0 and successfully bring that site into 2.0?
2) what is the most efficient and easiest way to get both of these sites running in 2.0? right now i have two domain files (created on two different computers).
3) for domain management, is it best to move from the iWeb folder in my home library to different folders (one for each site, with separate domain files, and my 2.0 domain file is NOT called domain, it's the name of the site) to another location? (and of course, i will back these up just in case.) and when i want to update a site, i just open that individual domain file, right? or will these sites publish over each other?
please help. i am at my wits end. i'm sure this is a relatviely simple issue, but i'm new to iWeb.
thanks, thanks, thanks for your help guys.
joojy

joojy,
Welcome to the forums!
First of all, your original 1.1.2 site may not, in fact, have been overwritten. It is quite possible that the site remains in it's position on the iDisk, Web/Sites/iWeb/YourSite, but because you published to the iDisk (.Mac) from 2.0, a different index.html file has been placed in the root level Web directory which is causing the 404 error. Navigate to the directory on the iDisk, using the Go menu in Finder, and look to see what is actually there. Follow this path:
Go/iDisk/My iDisk/Web/Sites/iWeb/YourSiteWillBeHereIfYourLuckIsGood
If your site is there, great; if it isn't, it's not really a problem because hopefully you still have the Domain.sites file on the MacBook Pro and you can republish it if necessary. If it is there, you can modify the index.html file on the iDisk using a text editor and get your url redirected back to where it should be.
Second, do not open your 1.1.2 Domain.sites file with 2.0 until you have a backup of this Domain file. External drives are best for this. Assuming the backup is in place, launch 2.0, choose the Domain.sites file, and click on "update". It will be updated to a Domain.sites2 file. If the site looks ok then continue on with editing/publishing.
Skipping to question (3), by all means, abandon the default location of the Domain.sites file in the Home folder's Library and get accustomed to keeping your Domain files in their own, respective folders. When you want to open one just double-click it.
You are going to encounter difficulties publishing multiple sites in 2.0.2, unless you keep all of the sites in a single Domain file. 2.0 is publishing to a different directory on the iDisk than 1.0; it publishes to /Web/Sites/, as opposed to /Web/Sites/iWeb/. Publishing a site from a separate Domain file erases previously published sites. I have been able to publish multiple sites, from multiple Domain.sites2 files, by mounting the iDisk and actually moving the Site folder back one level, into the root Web folder, and then publishing. When finished, I move it back again. If you have RSS feeds you will probably get a 'file in use' error. The alternative, (other than keeping all sites in a single Domain), is to publish the site to a folder and then manually drop the Site folder into the Web/Sites/ directory on the iDisk. Of course, some .Mac functions are lost when publishing this way.
Work through this info and post back.
-Mark

Computer won't boot up! Please help.

How's it going guys, I have a powerbook G4 that I have owned for a few years now. I woke up this morning to my computer making a weird processor noise, it was a repetitive noise, and my screen was frozen. I thought my computer had frozen or something. I did a hard shut down on my laptop and my computer will not boot up mac osx. It stays Stuck on the Apple page. I've tried taking the battery out, i've tried new ram, and i've tried restarting it several times, and to no avail has my computer booted back up. I have the mac osx disc and that won't even load up. Can anyone please help me out. I'm in dying need of my laptop! Thanks! - Brian

When I try and repair the disk it reads the 74.5 GB TOSHIBA MK8025GAS Harddrive but It doesn't read the HD drive right under it. I click on the toshiba disk and i tried repairing it and it gave me an error message. The message reads : "First Aid Failed. Disk utility stopped repairing HD because the following error was encountered. The underlying task reported failure exit."
The actual disk utility window reads "Invalid node structure" in red letters. "The volume HD could not be repaired : Error : The underlying task reported failure on exit. 1 HFS volume checked : 1 volume could not be repaired because of an error. Repair attempted on volume 1, 1 volume could not be repaired.
Any suggestions? And how do i go about doing an archive install? And how do i go about using diskwarrior? Thanks guys. I really appreciate this. I need this computer up and running for school. I'm actually at my college library typing this out. - Brian

Please Help My Daughter - iBook G4 Needs Software Upgrade ??

I have recently inherited an iBook G4 1.2 GHZ 256 RAM I think 30 or 50 GB. I cannot tell now because of what I did. The iBook was not working and I found it had a bad solder on one of the chips (a common issue on this model). Once repaired, it needed a new battery, and then it sprang right to life. The iBook worked great - I could use Safari, Garage Band, etc, but due to it's age, Itunes did not work and so I thought if I reinstalled the original operating system (Panther 10.3.5 circa 2004) from the original discs, then I could upgrade from there until I found an iTunes version I could use with a newly reset iPod I had and use it basically just for music. BIG MISTAKE. After I cleanly installed it all, I now cannot use Safari, profiler won't open and neither will most other applications - I double click them, they flash once and then go away on the sidebar. So, I need to find a way to upgrade this machine past 10.3.5 so I can get it to work. Right now, I can only get to the internet using ie for Mac 5.2 - UGH !!! Now I know why Apple stopped using that software. Anyway, I was doing all of this to get a clean version of iTunes on it so as a surprise, my daughter could sell it and the iPod to raise money for a class trip she is taking to New York in the Spring of 2015. Please please help me. Is it as simple as getting updated OS software? I have tried a Tiger disc, but it stopped before it really even got started and said it could not be loaded.    I can see the previous user still has files under user and I can see the folder for the previous system, but they are not accessible. I do have a 27" Mac desktop if that will help me to upgrade the iBook in any way. Thank you for reading all of this. Please let me know what options I might have to get this running so it can be sold off. IBook

256 MB RAM is the biggest problem.
http://www.everymac.com/systems/apple/ibook/specs/ibook_g4_1.2_12.html
http://eshop.macsales.com/shop/memory/iBooks-PowerBooks/G4-iBook/
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
    * A PowerPC G3, G4, or G5 processor
    * Built-in FireWire
    * At least 256 MB of RAM (I recommend 1GB minimum)
    * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
    * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
Apple may even have an International version...
https://discussions.apple.com/thread/5231053?tstart=0
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Classic/OS9 Apps no longer supported.
May be available from Apple again, or not...
https://discussions.apple.com/thread/4720126?tstart=0
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
What color &what is the 2z691-****-A number on yourInstall Disc?

Persistent surface scan error on techtool- please help

My Powerbook started running slower than usual, so I decided to run the Techtool Deluxe cd I got with my Apple Care plan. I ran all the tests. My result: 5 errors in the Surface Scan test.
I didn't know what to do, so I took my Powerbook to the Apple store Genius Bar. The guy just said I needed to reformat my HD. So, I did the "erase and install" reformat at the store.
But, the genius bar guy didn't seem to know what he was talking about, so after I did all the software updates at home, I decided to run the Techtool Deluxe cd again. Again, the results showed I had 5 errors in the Surface Scan test, even after I had completely reformatted my hard drive.
I had the 3.0.4 version of Techtool, and just to be safe that it wasn't out of date, I installed it on my computer and updated it to version 3.1.2.
With the updated 3.1.2 Techtool Deluxe program, I ran all the tests again.
And STILL I have 5 errors on my Surface Scan test.
Here is a copy of my results (every thing else passed).
Surface Scan
Failed - 5 errors
The Surface Scan test will scan the disk for bad blocks.
Media defects cause this test to fail. You should consider backing up the device, reformatting the media, replacing the data, and then testing again.
Please help! What am I supposed to do???? (I don't think reformatting my HD will help, because I already did, and still have this problem)
Thank you!

Welcome to the Apple discussions.
When you reformatted the hard drive, did you do an erase and write zero's? That's important because that's what remaps the bad sectors of the hard drive. After booting from the OS X CD, choose disk utility, choose the hard drive, and on the erase tab, choose security options and write zero's. If you don't do this step, a plain erase or erase and install only deletes the index or catalog of the disk contents.

Mac Acting Erratically: Please help Safari iTunes Messing Up

Okay I have an Apple PowerBook G4 running Mac OS 10.3.9 Panther (purchased late Nov 2003 was originally running 10.2.8 Jaguar) and up till a few days ago everything was running smoothly. That is until after I upgraded to QuickTime 7.1.2 and installed iTunes 6.0.5 when the problem started. Somehow my login.keychain for Safari got corrupted and I tried deleting original and making a new one.
Here's what has happened since then:
Any free media I have downloaded like videos or music off free sites (without Digital Rights Management) already still work. However, if I try downloading new stuff the new files don't work.
Since day before yesterday 4 times when I open iTunes it tells me my Library has been damaged. All my music files are still on my hard drive and are still playable but my iTunes Library file is corrupted -- how and why I don't know.
No music appears in my Library nor do any of my videos in .m4v format (iPod format) show up in my Library since then. I trash damaged file and re-import or select add to library and re-add all the media to my Library seems to work fine. I play them and most of them are playable. Even when Library works a few that played earlier have a skipping problem.
In Safari all my bookmarks got deleted -- I had to back, find the websites and re-add them -- fortunately when I closed Safari and re-launched the browser they remained saved the next time I closed and re-started the browser. However, third time (normally when something doesn't work twice they say third time's the charm) well the third time I opened Safari everything got deleted again.
My iTunes Library is acting erratically -- files I download don't work although files I already have are still playable usually except when my programs run across errors that didn't exist earlier.
I have Microsoft Office X 10.1.6 with the PowerPoint X and Excel X Security Updates, the Apple Security Updates 2006-002, 2006-003 and QuickTime 7.1.2 and iTunes 6.0.5.
When I originally downloaded and installed Security Update 2006-001 my Safari completely broke and would stop running and my Dock Menu dissappeared until restart but even then Safari stopped working. Could find no other solution than reinstalling OS X to return my Mac to pre Security Update 2006-001 levels. Not even Disk Utility solved the problem.
iTunes 6.0.2 also caused problems for me (I heard it caused problems on Windows also) the problem on my Mac was Disk Utility stopped working altogether. Fortunately, by deleting the game Chess from my Mac it fixed the problem. Today, I have Chess back on my computer because since my last OS reinstall I just updated my iTunes to 6.0.3 (I think) I now have iTunes 6.0.5 and have had no problems with Chess and iTunes or iTunes and another application like Chess preventing Disk Utility from working -- but now this problem I am describing where my Library erases itself regularly -- sometimes I restart iTunes and the new user wizard shows up and asks if I want iTunes to find my media and automatically add it to my Library when it does I say yes and it re-adds everything but somehow I have 2 files for every song on my computer and it re-imports (or imports) all my music, videos and podcasts back into my Library once and then re-imporitng it again
This time Safari is working but bookmarks are being erased and re-erased, iTunes is acting all screwy, files I download don't work when they should, I tried deleting and re-downloading a video I had saved on my hard drive (that I downloaded earlier) and the exact same file (no changes had been made to the file when it was re-uploaded) had errors playing when the download completed.
Fortunately, I had burned the video to a CD so I can re-copy it to my Mac and when I play it off the CD on my Mac or copy directly to Mac and play it works just fine.
Since downloading these updates cannot download anything anymore without errors when playing them.
If I downloaded same files earlier though they would have worked.
Only as a last resort would I do a clean reinstall of OS X -- thing is it would take a lot of work just to reinstall OS X, copy all my files I have backed up back to my hard drive, re-importing my music and artwork, re-installing Microsoft Office X and its updates, reinstalling some (but not all the latest ones if neccessary) of Apple's Security Updates, reupdating to Mac OS 10.3.9 to reinstall QuickTime 7.
I had like 283 files in my iTunes Library, including all my music, videos, podcasts etc.
Imagine how long it would take to get them all back in there; and I re-did it last night until it got erased again. Don't want to re-do it unless next time it stays permanently.
Just a note I also have Virex 7 on my Mac -- and it used to be a startup item but somehow it got disabled from starting up.
Also, I do have VLC Media Player but even that has been having problems with playing newly downloaded media files since I updated my QuickTime.
So the problem now is with my iTunes Library erasing itself continuously and even when its working sometimes refusing to play an entire track (it starts playing a song and then skips to the next one) I've checked my preferences and cross shading or whatever its called is unselected but sound checker is on.
Also the problem involves my Safari erasing bookmarks on its own as described above. Please help anyway you can!
As a last resort will do a clean reinstall, re-copy all my files back to my hard drive, reinstall my programs, re-update my Mac carefully etc.

Thanks for the help. I will take your advice and try running Disk Utility again. I have noticed sometimes when running Safari after quitting the application my defaults get changed -- that is my preferences go away. I have popup blocking and tabbed browing normally enabled by default it used to be if I enabled them as long as I didn't manually disable them that they would stay the same even after I quit and relaunch the browser, but now they get disabled when I quit and have to manually re-enable them again.
Also as noted bookmarks get deleted. Since the time I posted this thread I had at one time done a clean reinstall of OS X -- did it about 1-2 weeks ago. Not sure if videos I download on my Mac still have same problem but noticed if I download same videos on a PC that I used to download and play directly on my Mac that I could burn them to a CD or put them on a flash drive and transfer the file to Mac without any problems but downloading directly on Mac and then playing causes difficulty.
However, the same issue with Safari and iTunes has still been lingering for a while. I already have Mac OS 10.3.9 Combined Update installed should I try re-installing again? That would require me to reinstall OS X again and then update to 10.3.9. Or simply re-download and re-install 10.3.9 if possible over existing configuration so installing 10.3.9 over 10.3.9?
3 times out of 5 iTunes Music Library becomes damaged -- a few times I have tried since then deleting files in iTunes cache -- shouldn't become too big anyways -- otherwise it could become slow or something (good reason for cleaning Safari cache sometimes also) of course I wouldn't clean out the entire cache unless I had to or I thought that would fix the problem etc -- unless maybe it would even do a lot of good for resolving the problem.
I even tried trashing the damaged iTunes Library and the iTunes Music Library.xml file when the Library wasn't working.
If the problem re-occurs should I trash the iTunes preferences file(s) like iTunes.plist etc would help?

Photoshop CS3 crashes all the time - Please help!

Hello
I didn't find any answer in the forum.
I work with Photoshop CS3 Version 10.0.1. on Mac Powerbook 10.4.11.
Photoshop quits all the time, no work possible anymore. It quits when I want to open a file or when I want to safe an new file (message PS unexpectedly quite).
The trouble (maybe - actually I am not sure) may started after I updated all Adobe program. There were some messages popping up that not everything was updated properly.
Anyway I reinstalled Photoshop 3 times and CS3 completely 2 times and the last time I run the clean up program as well. No change.
Please help! Thank you very much.
Rosa

Rosa,
>So, you are also suggesting that I don't upgrade but install new.
NEVER, ever use the "upgrade" option.
Rather, do an "Archive and Install".
>What do I have to take care of beside of making a backup from everything?
Routine maintenance is imperative.
I still advocate Repairing Permissions (with Apple's Disk Utility) before AND after any system update or upgrade, as well as before AND after installing any software that requires an installer that asks for your password.
I have seen software installations go sour because the installer did not find everything as and where it should be.
I have also seen software installations go bad because the installer did not clean up after itself properly and did not leave everything as and where it should be.
This is just my own personal opinion and practice based on my own observations. Others may disagree and that's OK. I can only base my routines and my advice to others on my own experience and conclusion. I don't pretend to know why others believe otherwise.
Repairing Permissions after the fact (i. e. not immediately before and after an install) seldom helps.; Try it anyway, though.
====
Additionally, if your machine does not run 24/7 so that it runs the daily, weekly and monthly Cron Scripts in the middle of the night as intended by Apple, run Cocktail (shareware) as well.
Cron Scripts are maintenance routines designed by Apple to run on a daily, weekly and monthly basis in the middle of the night.
If you don't run them, you WILL run into trouble, sooner rather than later.
Here's an excerpt from the Apple tech doc
http://docs.info.apple.com/article.html?artnum=107388
Mac OS X performs background maintenance tasks at certain times if the computer is not in sleep mode. If your computer is shut down or in sleep at the designated times, the maintenance does not occur. In that case, you may want or need to run these manually.
Mac OS X periodically runs background tasks that, in part, remove system files that are no longer needed. This includes purging older information from log files or deleting certain temporary items. These tasks do not run if the computer is shut down or in sleep mode. If the tasks do not run, it is possible that certain log files (such as system.log) may become very large.
Also, from:
http://docs.info.apple.com/article.html?artnum=106978
The disk activity generated by find is a normal part of file system maintenance, used for tasks such as removing invisible temporary files that are used by the system. It is scheduled to occur early in the morning at 03:15 everyday, 04:30 on Saturdays, and 05:30 on the first day of each month.
NOTE:
There have been comments to the effect that Apple "fixed" this in 10.4.2 and later versions of the OS, but I have not been able to verify this to my satisfaction. The reference in the 10.4.2 release notes are far from explicit on this subject.
= = =
If you have DiskWarrior, run it regularly too.

10.4.11 or my PowerBook? PLEASE HELP!

Similar Messages

Maybe you are looking for