10.4.11 Update conflict with Netgear wireless router

I downloaded the 10.4.11 update, and now I can't access my comcast email. I can surf the internet and access everything else, but when using my Netgear wireless to connect, no email. I can connect and access it elsewhere using other wireless routers. Any thoughts or similar experiences?

I hate when people do this and feel bad, but . . . I have a Netgear WPN824v2 and have not had problems with wireless connections and or retrieving mail.
I would not be surprised that the Location profile is damaged in someway since you can connect and function on other wireless networks. This type of problem I have never heard of and it kinda makes no sense. Now if you were completely locked out and couldn't surf, then I would suspect the router. But since you can surf . . .
Try making a whole new Location Profile and see what happens. And/or try to track down any differences in the connection setups for the working wireless' and see that are any differences that the OS upgrade could have changed.

Similar Messages

  • Macbook Pro won't operate with Netgear wireless router

    In my setup, the macbook pro's physical IP address has to be configured in my router and that seems to be entered OK. However, the macbook won't work wirelessly via the router. The router uses 128bit hex WEP key and the macbook at first seems to accept the key even though it fails to function. When I go back to check the settings however, it seems the macbook is requiring a WEP password, not a key. Could this be the cause of my problem? How can I sort out this problem please? TIA .... Greg

    First try with out a password. Then try a 10 digit WEP key.

  • Can AE get in conflict with my wireless router when AE is joining?

    The problem is that the sound drops out after about 10-60 seconds. I also loose my Internet connection as well as a yellow light on the AE is starting to blink. After about a minute or so it reconnects automatically, but when I start playing music again the same thing is happening..the sound drops out! Any clue why this is happening? I use WEP secure my wirless network.

    Does your router support any other form of encryption? See if this KB article makes any sense to you.
    AirPort: Joining an encrypted wireless network
    Personally, I have a sneaky suspicion it has to do with the way your ASCII/hexadecimal password is or isn't being converted to something recognisable by the router. I use a Linksys router at home with a hexadecimal password generated from an ASCII passphrase, and that seems to work fine.
    Yang

  • Access a NetFlix account with Samsung TV, Samsung home theatre system w/netgear wireless router

    I just want to know what is required to wirelessly access a NetFlix account using my Samsung TV & Samsung home (DVD) theatre system with a Netgear wireless router.

    Like previous poster mentioned,  for the Netflix app itself, either use built in NetApp on your tv or get it via Bluray player that has that NetApp .As for connectivity, you'll need to either get an Access Point or the proprietary Wireless LAN Adapter from Samsung. I've got both and I would recommend the AP for multiple port capablity ( more than one Ethernet jack ).

  • G4+Netgear wireless router+Xbox Live

    O.K, I have a G4 connected to a Netgear wireless router, I also have an Xbox that I wish to connect to Xbox Live, can I get the thing working with an Airport Express??
    or should I buy the microsoft wireless adapter?(If I could i'd rather buy the express)

    O.K, I have a G4 connected to a Netgear wireless
    router, I also have an Xbox that I wish to connect to
    Xbox Live, can I get the thing working with an
    Airport Express??
    No, in order to use the ethernet port of an Airport Express (AX) in this manner you need to use WDS and that is not possible with a Netgear router.
    or should I buy the microsoft wireless adapter?(If I
    could i'd rather buy the express)
    The Microsoft adapter will probably work.
    iFelix

  • I can't get a signal through whole house because of a brick wall   What range extender do you recommend to be used with my wireless router ( apple brand)

    I can't get a signal through whole house because of a brick wall   What range extender do you recommend to be used with my wireless router ( apple brand)

    Very few 3rd party wireless extenders will work with an Apple router, so your best bet is always to use an extender that is the same brand as the main router. An AirPort Express is a popular choice for this type of application with another Apple router.
    If you had a Cisco router, then a Cisco extender would be your best bet.  Same for Netgear, etc.
    But......a wireless extender can only "extend" the quality of wireless signal that it receives, and not much of a wireless signal is going to make it through a brick wall, so whether any extender might do what you want is open to question.
    You won't know whether an extender using wireless to connect will work to your satisfaction in your home until you actually try it out in your home.
    The performance will always be much better if you can connect the extending device back to the main router using a wired Ethernet cable connection.
    If it is not possible to run the Ethernet cable, a pair of Ethernet power line adapters might be able to send the signal over the existing AC power lines in your home. The theory with these devices is that you already have the wiring in place, you just need the adapters.
    In practice though, things do not always work as well as the theory might suggest, so if you decide to try a pair of adapters, it might be a good idea to understand the store's return policies before you buy.

  • Netgear Wireless Router WGT624 x3

    Will the Wireless-G Noetbook Adapter function using a Netgear Wireless router?
    Thanks,
    Blader

    I figured out what to use for the 'device name' in the netgear wireless card setup.  When I entered 'Linksys', it worked!  So I when I was entering Linksys Wireless G, I was using too many characters.
    Anyway, thank you for the quick response.  My Linksys Wireless G Notebook Adapter and now functioning with my 802.11g Netgear router

  • Will an OS X Version 10.4.11 work with a wireless router?

    Will a OS X Versionb 10.4.11 work with a wireless router?

    blue apple > about this mac > more info button. Click on the hardware line. It has a little triangle in front of the work hardware.
    If you do not have an airport card.
    Ethernet BridgeEthernet Bridge  "The versatile Wireless-G Ethernet Bridge can make any wired Ethernet-equipped device a part of your wireless network."  from linksys example: http://www.amazon.com/Linksys-RE1000-Wireless-N-Range-Extender/dp/B005FDXMJS/ref =sr_1_1?ie=UTF8&qid=1314563758&sr=8-1    Setup: http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayou t&pagename=Linksys%2FCommon%2FVisitorWrapper&cid=1134692497433
    USB dongle
    Introducting RokIt, a new wireless USB adapter that is compatible with Mac OS 10.3, 10.4, and 10.5 Leopard. http://rokland.com/store/product_info.php?products_id=319
    Newer Technology MAXPower 802.11g/b Wireless USB 2.0 Stick Adapter $15.99 http://eshop.macsales.com/item/Newer%20Technology/MXP2802GU2/  Newer Technology MAXPower 802.11n/g/b USB Adapter. The easiest way to add Wireless Connectivity to ANY computer! $29.99 http://eshop.macsales.com/item/Newer%20Technology/MXP802NU2C/

  • Pls help me.i have a problem with WRT54G wireless router.

    Dear all, Now i got face some problem with WRT54G wireless router.The problem is after i connect to the internet...the wireless will automatic drop..is that any ppl here got face this and got any solution to solve it...?thanks for sharing..

    hi...logon to router's setup page and try changing channel to 11, go to advanced wireless settings, try changing transmission rate to 54Mbps, beacon interval to 50, fragmentation and RTS threshold to 2304, also try upgrading latest firmwar on the router...check whether it maks any difference or not and let me know.

  • I now have internet thru AT&T Uverse with their wireless router.....do I still need to use my Airport Express for my 2 MACS or can I just unplug it?

    I now have internet thru AT&T Uverse with their wireless router.....do I still need to use my Airport Express for my 2 MACS or can I just unplug it?

    You can just unplug the express and use the Uverse wireless or ethernet directly to it.

  • Conflict with Linksys Wireless C

    I've recently installed a Linksys Wireless Networking WMP54G card in my desktop and apparently it is conflicting with my Audigy 2 Soundblaster card (i.e. each works fine by itself, but the system keeps re-booting if they are installed together and won't boot into Windows XP at all).
    I'm using Windows XP Professional with Service Pack 2 and Linksys tech support has been no help at all, simply telling me it's an OS issue and there's nothing they can do. I already tried manually assigning IRQ numbers to each of the PCI slots in the BIOS, but that doesn't seem to have done anything, since when I view "System Information" in windows, the IRQ for both the Linksys card and the Audigy are changed to IRQ 7 (instead of 0 & , as I had manually assigned in the bios).
    Does anyone know if there's a way to change the IRQ setting on the Soundblaster Audigy 2 card, so that it doesn't conflict with my Linksys card? Or, alternati'vely, is anyone familiar with any XP settings that I can change to get XP to assign a different IRQ to the Soundblaster card?
    At least a link to any possible information would be very much appreciated. It's been three days now of trying to get these two cards to work together and I'm about to throw the whole thing out a second story window!
    Thanks!
    :angry:

    check your bios if the option Plug&play os is enabled.
    This because Linksys is right, windows handles the irq/dma sharing automatically.
    And as you experience not always the right way.
    Maybe you can move one of the two cards in another pci-slot(move them as far as possible away from each other(Linksys+Creative card).
    i guess you can better contact M$...(if you've a legal windows).
    Or try a Linux boot cd(li've cd linux that runs from cd like knoppix). Because if you've the same problem with a linux li've cd then it must be a hardware issue, if it works fine with Linux Li'veCd then it's a Windows issue like Linksys try to explain.
    knoppix li've CD: (download image and burn it to cd-r, then start computer(boot) with this cd-r in it)
    http://www.knopper.net/knoppix-mirrors/index-en.html
    oh "and I'm about to throw the whole thing out a second story window!" advise: throw the soundcard away!
    p.s. congratulations with your Wireless Fidelity hardware...WiFi=freedom !!!(compared to commercial isp's)Message Edited by www_96KHz_tk on -4-2005 2:05 PM

  • Latest JRE update conflicts with Webroot Spysweeper 4.5

    The latest JRE update downloaded to my PC now conflicts with Webroot Spysweeper. The conflict causes long delays in launching Internet Explorer and opening new web sites. The delays go away if the new Java browser add-ons are disabled.
    Does anyone have any insight to this problem?
    How do I formally notify Sun of this new conflict in their product?
    Thanks.

    The latest JRE update downloaded to my PC now
    conflicts with Webroot Spysweeper. The conflict
    causes long delays in launching Internet Explorer and
    opening new web sites. The delays go away if the new
    Java browser add-ons are disabled.
    Does anyone have any insight to this problem? It is usually good not to have those softwares installed on your machine.
    How do I formally notify Sun of this new conflict in
    their product?http://developers.sun.com/contact/index.jsp

  • Pacman update conflicts with vbox ~~

    after i upgrade the system,i see this :
    sudo pacman -Su
    :: Starting full system upgrade...
    :: Replace gspcav1 with core/kernel26? [Y/n]
    warning: fluxbox: ignoring package upgrade (1.0.0-1 => 1.1.1-1)
    resolving dependencies...
    looking for inter-conflicts...
    error: failed to prepare transaction (could not satisfy dependencies)
    :: ipw3945: requires kernel26<2.6.27
    :: virtualbox-modules: requires kernel26<2.6.27
    :: virtualbox-ose-additions-modules: requires kernel26<2.6.27
    the kernel conflicts with vbox ~~~
    may fixed soon ~~
    i need to use quartus on windows , do i need to use vbox to run M$ XP,   i only got quartus on .exe

    from http://www.archlinux.org/news/414/
    The ipw3945 driver doesn't compile anymore. It's probably easy to patch, but we'll stop maintaining it anyway. Please use iwl3945 or compile the driver yourself (the latest PKGBUILD and patches can be found at http://repos.archlinux.org/viewvc.cgi/ipw3945/trunk/)
    you can download packages before updating using pacman -Swd packages_that_you_need
    where -d skip dependency, -w download only
    Last edited by wonder (2008-10-14 22:15:06)

  • Senforce 3.2 conflicts with Intel Wireless drivers

    Hi, the company I work for is running Senforce 3.2 (the old name for Endpoint Security). It is conflicting with the Intel Wireless drivers in a batch of new laptops (both trying to start/stop the drivers at same time).
    Would like to know if anyone has seen similar behaviour, or what a possible solution might be.
    Many thanks.

    simonbarron,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Airport Express Conflicts with Clear Wireless Network?

    After months of stumbling around, trying to figure out why my Clear Wireless internet service was so choppy, I finally plugged the ethernet cable directly into my computer, and disabled my local Airport network. Voila! Works like a charm -- very fast and reliable, now. Trouble is, I don't have network access for my laptop. The problem (I suspect) is that I also have phone service on my Clear modem.
    Here's what the connection looked like (and was recommended by Clear Wireless), with <-> meaning wireless connection and <+> meaning an ethernet connection:
    computer(s) <-> Airport Express <+> Linksys Phone Box <+> Clear Modem <-> Clear Tower
    So, pulling the Airport Express out of this sequence cleared up ALL of the stalling problems and slowness. My new (and functioning) set up looks like this:
    computer <+> Linksys Phone Box <+> Clear Modem <-> Clear Tower
    My question is whether I can have somehow connect the Airport Express on the other side of my computer, and allow my local network access the Clear Wireless modem via my computer? Right now, I've got the Airport Express plugged in and running, mostly to check if there was simply an interference problem, and that doesn't seem to be the case (the phone connection is a base station with wireless handsets, so thought there might be interference there -- doesn't seem to have been an issue).
    Any advice on this would be great. Clear Wireless is as clueless on technical support as it is brilliant in concept. Still very much in startup mode, with phone operators reading from generic scripts and masses of angry users spamming their discussion board -- ugh! Thus my post here. I'd love to see a schematic that shows the optimal way to bring a phone connection into a local wifi network.
    Thanks!

    What I would like to do is to connect the airport express to the wireless network (Linksys-router).
    What are you trying to do with the AirPort Express Base Station (AX)? Use it for streaming iTunes and/or share a USB printer, or extend your existing Linksys wireless network?

Maybe you are looking for