10.4.11 update messes with Boot Camp beta

I am posting this again as my post is way down another discussion.
I did the update yeterday without knowing about the bug. Now Windows XP won't start up in boot camp. This is really annoying. Mac OS X boots fine.
So. Can I downgrade from 10.4.11 to 10.4.6 without having to reinstall all the other applications? What about Boot Camp? Is this an option I select from the utilities available on the install disk?
What about archive and install? Will that archive all my applications and data so I don't have to do reinstalls?
Otherwise, what if I upgrade to 10.5? Will this fix the problem without me having to redo the whole Windows installation? There is a lot of data, most of it is backed up but still a pain to restore.
I have looked at other responses to this problem but not found the definitive answer.

What if I do upgrade to 10.5 - will that update the system without having to reinstall Win XP etc?
FYI - Other articles concerning this issue are: http://www.macobserver.com/article/2007/11/27.7.shtml
http://apple.slashdot.org/article.pl?sid=07/11/27/0040206
http://blogs.pcmag.com/securitywatch/2007/11/bewareboot_camp_plus_mac_os1.php
http://www.macnn.com/articles/07/11/26/tiger.update.data.loss/
As you can see - I've been looking around a lot!
Message was edited by: Rob_Droitwich

Similar Messages

I can't boot from the windows cd with boot camp

I got Vista up and running via boot camp but now I have a problem that could cause some issues. How the **** do you boot from a windows cd with boot camp!?!? When I stick in the windows based CD (could be the vista install CD -after vista's been installed of course- or a Windows home server restore cd) and hold down the option key I chose to boot from the CD in the menu then the screen goes black as it should and then it says press any key to boot from cd or dvd..... It gives me 5 seconds to press a key and then it conintues to boot into Vista. The thing is when it asks me to press any key I press any and all keys on the keyboard and I get no response and it just boots into vista. This can be quite a problem, what if I need to restore vista via the install CD? I can't chose to boot from it cause everytime it asks me to none of my key presses register. So everytime I have a problem I won't be able to restore or even diagnose it, I'll just have to reinstall vista? I don't think I can even bring up the safe mode or anything like this. The keyboard won't work until I reach the password screen of Vista. I've also tried plugging in a USB keyboard to it and it still doesn't work. So basically I need to know how to make the keyboard work before Vista loads.

Ok, well I just tried booting from the windows cd and it seems that I lied to ya It seems that you can boot from it. Although I only took it to the point I was comfortable with. The boot resulted in it asking me to install windows and I didn't see any partitions listed or anything, so I chickened out (so to speak) not wanting to take the chance of my Leopard installation getting screwed up.
It's been a quite some time since I used the Vista boot disc and can't really remember how it went when I used it in conjunction with boot camp beta. Sorry can't give you anymore information.

I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).

I need to know which update(s) I can apply to help stabalize the system.

Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

When i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?

when i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

HT5639 Do I need to uninstall boot camp 4 before I install and update to boot camp 5. I already have windows 8 pro with boot camp 4 installed. Do I need to unistall boot camp 4 or not necessary?

I already have windows 8 pro with boot camp 4 installed on my macair book 11". I have searched the entire articles on how to upgrade boot camp 4 to boot camp 5 but have found no answer as to my question: Do you have to uninstall boot camp 4 drivers before you install boot camp 5? I am not sure if it is ok to install boot camp 5 directly without uninstalling boot camp 4 because there might be driver version conflict. So I have not installed boot camp 5. Is it ok to install boot camp 5 withoust uninstalling boot camp 4? Your answers will be much appreciated. Thanks.

Welcome to Apple Support Communities
You don't have to uninstall Boot Camp 4 drivers before installing Boot Camp 5 drivers. Boot Camp 5 drivers will simply overwrite Boot Camp 4 drivers, so you don't have to uninstall old drivers before installing new ones and making that process easier

Mouse not working with Boot Camp after 10.5.7 update

I upgraded to 10.5.7 recently, and now my mouse doesn't work on Boot Camp. It doesn't seem to register, and I can't move the pointer. I tried this with two mice that worked just fine on the Mac OSX side. Any ideas? Has anybody else noticed this?

I have a new (July 2009) iMac24 and neither the wireless mighty mouse nor keyboard work with Boot Camp XP Home Edition SP3. They install OK with the Bluetooth control panel, but then after five or ten seconds, drop out of the control panel and have to be discovered again. I spent two hours today with a Mac support expert, but no joy. We both gave up. It seems the wireless mouse/keyboard does not work with Boot Camp. If anyone hears of a solution, please let me know.

HT3986 Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64, however when i insert my OS CD to install the drivers using the boot camp method, it says unsupported to this computer model

Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64 bits but however when i tried to install the drivers using the OSX MAC CD using boot camp, it prompt me boot camp x 64 is unsupported with this computer model. Then i tried the method by right click the bootcamp x64 and managed to install the drivers. However, i still couldnt manage access the internet and it prompts me no networking hardware detected...Any idea how can i solve it?
P.S i tried updating my bootcamp version 3.0.4 in mac os with bootcamp x64 version 3.1 exe but it shows me weird wording..
my bootcamp version in windows 7 is 2.1..

Uninstall 2.x totally
Use CCleaner Registry tool
Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
BC 2.2 was XP and Vista only

Need help with Boot Camp and Win 7

I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp. I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1. That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
Thanks.
Mike

Mike,
I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
https://discussions.apple.com/community/windows_software/boot_camp
Roger

Leopard 10.6.8 with Boot Camp 3.0.4 do not support Windows XP SP2???

Hello!
I have my MacBook Pro with Leopard 10.6.8 with Boot Camp 3 on it.Reading a BOOT CAM article I could see that it supports Windows XP SP2.I just installed Windows XP SP2...and when I am trying to use the drivers from MAC DVD it says that BOOT CAMP needs Windows 7.Why I can not use XP?Or where I can get the proper drivers?I have downloaded Boot Camp Drivers XP update pack 2.1 and tried touse it in that XP but just double clicking on it doesn't happen anything:(
Please Help.

Your saying BC 3.4 is on the Mac installer disk? I picked mine up in august 2011 and it only has 3.1 on it if I remember right. How did you check it?
As of today my BC Assistant says 3.4 but the Control panel in Windows only says 3.3, I figure it an't broke I'm not worried about it.
When you insert the disk, it asks you what to do, Run or Open, select Open.
Make a new folder on the desktop in XP, drag ALL the files over to it.
Right click on the setup.exe and select one of the options:
1)-Troubleshoot Compatibility, do what it suggests,
2)-Select Properties / Compatibility / click Run this program in Compatibility mode: then select XP sp2 and work your way up.
If anything pops up about permissions then right click on it again and select Run as Administrator.
If it still won't work then open the Boot Camp folder / Drivers folder / and install each one manually.

Installing Windows 7 With Boot Camp on Mac Pro 3.1 w/GTX285 Video card

I have an Early 2008 Mac Pro 3.1 running the latest version of OS 10.6 with all updates. I have an nVidia GTX285 card installed in the Mac Pro that has been working fine for at least six months under OS 10.6 with Mac drivers downloaded from the nVidia web site and installed under OS 10.6. I replaced the ATi 2600XT video card with the nVidia GTX285 in order to have CUDA support in Premier Pro CS 5 and it works beautifully.
I now wish to install Windows 7 Professional 64 bit on this Mac Pro. I have never had any version of Windows installed on this Mac Pro. I am using Boot Camp assistant and a new full version of Windows 7 Professional 64-bit.
My question is do I need to remove the GTX 285 graphics card and replace it with my AT 2600XT before installing Windows 7? This would be a real pain to do because the two connectors to the motherboard are hard to get to. However, since Apple never used the GTX285 in any of its computers, I am worried that I will not have any video display when I go to try and install Windows 7 with Boot Cam assistant.
Please advise me whether removing the graphics card is necessary before installing Windows 7 with Boot Camp.
Thank you in advance for responding.
Tom

NO.... he has a workstation, and not MBP, nor are "drivers already loaded."
How I would proceed -
Install Windows on its own drive.
Pull all the other drives.
Boot from Windows 7 Pro DVD
Forget Boot Camp Assistant, it doesn't do anything - unless you really want to install Windows on the SAME drive as Mac OS - not ideal and not what most of Mac Pro owners do.
Just insert your OS X DVD once Windows is up to date - helps to buy the SP1 OEM version $129.
Run Apple SETUP.exe (Boot Camp 3.0.x drivers) and update with ASU or manually to 3.2.
No you don't need to go back and use that ATI. And you dont' want to be in the situation of changing from ATI to Nvidia and all the hassle that adds. you are fine.
The Mac Pro is as close as anything to a standard Wintel workstation.
Add MS Security Essentials or KIS or whatever you favor. KIS2011 or NIS2011 are good, MSSE 2.0 is free and based on their enterprise product.
AV-Test.org Test Security-Software

Leopard partition will not boot with Boot Camp installed

I am running Leopard 10.5.2 with Boot Camp running Windows XP on about 150 computers in multiple computer labs on my campus. My problem is that a few machines every couple of weeks will stop booting into the Leopard partition. The problematic computers will however boot into Windows every time. Is there an update or something that is causing the Leopard partition to stop booting? I run disk repair and I get "invalid node structure" which causes the repair to fail. My only solution is to partition the drive then re-image the Mac side and Windows side. This unfortunately is not happening to the same computers each time, I fix one computer, then a different has the problem and so on.
Does anyone have an suggestions? By the way, I am running Bombich's BootPicker v. 2.0. Could this be causing the issue?

This helped with a previous Windows issue but when I boot the system while holding "option" key, the Leopard partition does not show up. The Leopard partition shows grey out when I boot from an install DVD and I can not repair permissions or repair disk.

Can I install Windows on my iMac 27, 3TB Fusion Drive, late-2012 with Boot Camp 5?

Hello. When I first opened the Boot Camp Assistant app, it said it could not work with the 3TB fusion drive. With the updated version of Boot Camp, the option to install Windows appeared. I tried to install Windows 8, but the loading bar stopped moving. I waited for hours, but it still did not move. I decided to quit the app, and re-open it, in order to try again. It crashed, and would not open. So I restarted my system and when I did that I noticed that I had about 1GB or so left of storage. This shocked me, because the disk was just suddenly filled for some reason. In hopes of fixing this I used an app called 'CleanMyMac' to try and recover the disk space. And as I thought the disk space returned to normal. However when I went to Disk Utility and clicked 'repair disk' it said this...
There is only 1 partition, so the Boot Camp process did fail.
I don't know whats wrong with my system though? I would like to install Windows, but I'm worried that I might recieve errors again. I have not got Apple Care, but I'm playing on buying it soon, due to it being almost a year since I bought the system.
Maybe I did something wrong when trying to install Windows with Boot Camp? I don't know, but if possible can someone please tell me if I can install Windows and if something is wrong with my system.
Here is some additional screen shots of the type of system I have.
Thank you for your help with this issue!

Which copy or version of Windows? and how where was it purchased?
my window installed itself perfectly on another computer.
One copy and you want to activate on two computers?
With 16GB, it will try to create 16GB hibernation file, 24GB page file, and need 20-30GB for the OS, plus room for temp, cache, applications, 9GB just temp to install SP1 update(s).
did you create 80GB or larger partition?
also, some macs with ssd + hard drive have issues, and of course you need Windows 7 64-bit home premium (Pro to use more).
OWC has up to 32GB, not cheap.
http://eshop.macsales.com/shop/memory/iMac/2010/DDR3_21.5_27
Crucial is usally very helpful, try email cs.

Need to Re-install Windows on Mac with boot camp

I purchased a Mac Pro from someone about 6 months ago that already had a 2nd drive with Boot Camp and Windows XP Pro running on it. Today for the first time when I booted into Windows, I got an error message saying that I "may be a victim of software counterfiting" and that my version of Windows is not an authorized version in my region.
I have an a genuine Windows XP Pro disc with seriel that I want to now re-install over the bad version. The problem is when I try to run the CD for install, I get an error message stating that I cannot install from the CD because the version of Windows I am currently running is newer than that on the CD.
So my question is, how do I uninstall the bad version of Windows and re-install the version off the CD? I know I will lose my files and programs but everything is backed up and I will reinstall everything when I get back up and running.
Thanks for the help!!

You can format from Windows CD if that is what you mean by "windows side."
Updates are usually done while boot in the OS you want to 'upgrade' while custom is only done booted from other media.
With a Mac Pro you could easily install in many different ways than if you only had a laptop or imac.
But you can't "pick yourself up by your own bootstraps."
I don't even like upgrade of SL while booted in Mac OS.
If it was my Mac I'd install Windows 7 and make better use of your hardware and the performance afforded.

I need help with Boot Camp 2.1! Win XP

I have downloaded the update on Windows XP SP2, but it will not install.
"The installation encountered errors.... Try again at a different time." That's what comes up.
I have tried everything! The command shell thing where you have to type the path of the update file (cmd.exe), I have checked the language code (yes it is 1033) and I have downloaded the files seperately. NOTHING WORKS! I have even re-installed Boot Camp.
I have:
Mac Pro
10.5.4 Leopard
Windows XP SP2
Any help will be appreciated!

I have found a solution!
Well not for installing Boot Camp 2.1 but for installing XP SP3 with Boot Camp 2.0!
I found it on a website but I can't remember which one. But here is what I did.
Start> Run:
Type: regedit
Click "OK"
On the left side of the window there should be a panel with folders name similar to "HKEY_....". Click on:
HKEYLOCALMACHINE> SOFTWARE> Microsoft> Windows> Current Version> Double click "Setup"
On the window should appear a few files next to the panel on the left. The file type should have "REG" then something after it.
Check in the "Name" column that you DO NOT have "BootDir". If you do then this is not the answer for you!
If you don't have that file:
Click EDIT> NEW> STRING VALUE
Name it: BootDir
Right click the file and go to Modify.
Then type in: C:\ and press OK (Or if another drive is your main drive (eg. D) then type in the letter of that drive instead of C (eg. D:\)).
Restart the computer and go into Windows again. Then download the SP3 update in whatever way you have done before.
The installation should continue without the message saying "You need more memory" or something.
FOR WINDOWS XP!

Will Windows 8.1 upgrade work with Boot Camp on OS X Mavericks?

Will Windows 8.1 upgrade work with Boot Camp on OS X Mavericks?

Welcome to Apple Support Communities
Of course. Make a backup of your files in Windows, and install Windows 8.1 as an upgrade. The Windows support software supports it without any issue, so if it is updated, you do not have to worry

10.4.11 update messes with Boot Camp beta

Similar Messages

Maybe you are looking for