10.4.2 Firewire Node ID not valid

The computer won't show known good LaCie HDs. Here are the logs:
Sep 2 12:52:18 powerbook-g4-17 kernel[0]: FireWire (OHCI) Apple ID 31 built-in: Bad selfIDs, issuing bus reset (retry 2)
Sep 2 12:52:26 powerbook-g4-17 kernel[0]: FireWire (OHCI) Apple ID 31 built-in: handleSelfIDInt - nodeID not valid (reset bus and retry 3)
Sep 2 12:54:37 powerbook-g4-17 kernel[0]: FireWire (OHCI) Apple ID 31 built-in: no valid selfIDs for more than 2 minutes after bus reset.
Sep 2 12:55:33 powerbook-g4-17 kernel[0]: FireWire (OHCI) Apple ID 31 built-in: Bad selfIDs, issuing bus reset (retry 4)
I'd be eternally grateful to anyone who can help me with this.
Thanks in advance.

Boot from your install disk, get past the language screen and choose Utilities>Disk Utility from the menu bar. Click on First Aid, choose your volume from the left-side panel and hit the Repair Disk button. If errors are reported then hit Repair again. If this doesn't repair your disk then you will need to a stronger disk utility repair program such as DiskWarrior. http://www.alsoft.com/DiskWarrior/index.html

Similar Messages

Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state

we have developed packages to do the followings
Extract data from DB2 Source and put it in MS Sql Server 2008 database (Lets Say DatabaseA).From MS Sql Server 2008 (DatabaseA)
we will process the data and place it in another database MS Sql Server 2008 (DatabaseB)
We have created packages in BIDS..We created datasource connection in Datasource folder in BIDS..Which has DB2 Connection and both Ms Sql Server connection (Windows authentication-Let
say its pointing to the server -ServerA which has DatabaseA and DatabaseB).The datasource connections will be used in packages during development.
For deployment we have created Package Configuration which will have both DB2 Connection and MS SqlServer connection in the config
We deployed the packages in different MS SqlServer by changing the connectionstring in the config for DB2 and MS SqlServer...
While runing the package we are getting the following error message
Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for
use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
ilikemicrosoft

Hi Surendiran,
This is because the package has been created by somebody else and the package is being deployed under sombody else's account. e.g. If you are the creator then the package is encryption set according to your account and the package setup in SQL server is
under a different user account.
This happens because the package protection level is set to EncryptSensitiveWithUserKey which encrypts
sensitive information using creator's account name.
As a solution:
Either you have to set up the package in SQL server under your account (which some infrastructures do not allow).
OR
Set the package property Protection Level to "DontSaveSensitive" and add a configuration file
to the package and set the initial values for all the variables and all the connection manager in that configuration file (which might be tedious of-course).
OR
The third options (which I like do) is to open the package file and delete the password encryption entries from the package. Do note that this is not supported by designer and every time you make changes to the connection managers these encryption entries come
back.
Hope this helps.
Please mark the post as answered if it answers your question

Just upgraded my workstation and render nodes to AE CC 2014 and now I receive a "render control file not valid" upon rendering out.

I just upgraded my workstation and render farm to AE CC 2014 and now I receive a "render control file not valid" on my render nodes when I try and render out an image sequence. Any ideas why the update would cause this? All my machines are updated to the latest version of AE CC 2014. Thanks!

Sorry I meant "Update". I was using AE CC, Installed AE CC 2014 on all my machines recently.

Error when create listener - thespecified IP Address 'IP' is not valid in the cluster-allowed IP range.

Hi...
I'm able to configure AlwaysOn and all things are great.
I have a problem only when create a listener , I have two node in same data center (SQLP1,SQLP2) and one in DR data center (SQLD1)
SQLP1 + SQLP2 > Sync
SQLD1 > Async
The error I face is
The specified IP Address 'IP' is not valid in the cluster-allowed IP range.
Check with the network administrator to select values that are appropriate for the cluster-allowed IP range.
(.Net SqlClient Data Provider)
I went through some suggestion and found a permission required (create computer objects) and I give it but still error show up.
I follow the same as here
http://blogs.msdn.com/b/psssql/archive/2013/09/30/error-during-installation-of-an-sql-server-failover-cluster-instance.aspx

Hi
Thanks for your follow up. I hope the below information is enough
Creating Listener through visual studio wizard “Add listener”
Hostname
IP Address
Description
SQLP1
Public
10.190.255.90/
Subnet 10.190.255.0/24
Private
10.192.255.90
subnet 10.192.255.0/24
MS SQL AlwaysOn Availability Test Lab Server 1 – Main DC
SQLP2
Public
10.190.255.91
Subnet 10.190.255.0/24
Private
10.192.255.91
subnet 10.192.255.0/24
MS SQL AlwaysOn Availability Test Lab Server 2 – Main DC
SQLDR1
10.193.255.90/
subnet 10.193.255.0/24
Private
10.194.255.90
subnet 10.194.255.0/24
MS SQL AlwaysOn Availability Test Lab Server 1 – DR DC
10.190.255.93
SQL Always on listener

Servermgrd[584]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "v\035\363d".

All,
I am having a very odd problem.
I have recently setup a Mac OS X Mavericks Server for the purposes of NetRestore.
Everything setup fine, no issues whatsoever and the server has been running non-stop for the past 78 days.
I've already imaged about 100 MacBook pros off of this server without a problem.
This morning I come in, start up an MBP that needs to be imaged and it sees the netrestore volumes and attemps to boot to it
then stops and doesn't go anywhere.
I've had my NBI's on an external firewire 800 drive (1TB Lacie Rugged) and its been working fine.
I've checked my logs numerous times and the only error I can find is: servermgrd[584]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "v\035\363d".
The exact same error keeps repeating every 10 seconds or so.
I read in another forum that sometime Mavericks Server doesn't like NBI images on external volumes, so I moved them to the standard /Library/Netboot/NetBootSP0 folder on the boot volume and turned off the external drive.
I'm able to NetRestore again now, but the process is far slower then it was previsously and the error above still persists.
I've rebooted the server, stopped and restarted the services, made sure no changes have been made on the network, and fully updated the server via software update.
Any ideas would be greatly appreciated!
Thanks in advance.

I post some other error.
I don't understand why some times when I reboot I don't get any errors and why some Ive this:
Mac OS X Versione 10.4.9 (Build 8P2137)
2007-04-26 09:26:54 +0200
At revision 7057.
Apr 26 09:27:02 MacBook diskarbitrationd[49]: SystemUIServer [265]:15143 not responding.
Apr 26 09:27:02 MacBook /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/ATSServer: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "ˆ®˜Ëî^?Ío".
Can any help me to found the problem???????
Thanks so much to all

Mapping Issue(if schema node is not present)

I have the following map as follows:
If the node Student_City is not present in the source schema(Student) then the map is not working .
How can I get the right output if a node is not present in the source schema and we want to proceed that schema ?
Prakash

I set the default value as follows in destination schema :
But I am getting the following error:
Invoking component...
C:\Notes\Practicals Document\SSDissamblerPOC\SSDissamblerPOC\ScriptSaveDissamblerProject\SSDissamblerProject\Map1.btm: warning btm1001: The destination node "Employee_Salary" is required but the source node "Student_City" is optional.
TestMap used the following file: <file:///C:\Notes\Practicals Document\SSDissamblerPOC\Locations\Instance.xml> as input to the map.
C:\Users\Administrator\AppData\Local\Temp\_MapData\SSDissamblerProject\Map1_output.xml: error btm1046: Output validation error: The element 'Employee' has invalid child element 'Employee_Exp'. List of possible elements expected: 'Employee_Salary'.
Test Map failure for map file <file:///C:\Notes\Practicals Document\SSDissamblerPOC\ScriptSaveDissamblerPOC\SSDissamblerProject\SSDissamblerProject\Map1.btm>. The output is stored in the following file: <file:///C:\Users\Administrator\AppData\Local\Temp\_MapData\ScriptSaveDissamblerProject\Map1_output.xml>
Component invocation succeeded.
The output is as follows:
In this Employee_Salary is not present.But I want this.
Note: Student_City node is not present in the source schema.
Prakash

Hierarchy node variable - successor node data not displayed

Hello,
I have a query with a hierarchy in the rows section. This hierarchy is restricted by a hierarchy node variable with the following settings: variable type hierarchy node; customer exit; single value; mandatory; not ready for input; cannot be changed in query navigation.
The customer exit correctly supplies the node. However, only data for THIS node is displayed in the query results. And data for successor/underlying nodes is NOT displayed.
I tried several things, including:
- rightclick Rows > Display as a Hierarchy
- customer exit variable: multiple values instead of single value; optional instead of mandatory
In the Hierarchy Attributes for the hierarchy, nothing is checkmarked, except for Root/Totals Item Appears Above and Drilldown start level = 00. The hierarchy and its nodes are valid from 01.07.2005 to 31.12.9999.
I have a feeling in what area the solution can be found, but I have no clue what to do further on with it. As a test I replaced the customer exit variable with a user entry variable. If I then execute the query, I can select either the node or the value (both with the same technical value!). If I select the node, I get all data, including data for successor nodes. If I select the value, I only get the data for the node, not the underlying successor nodes. For some reason, the customer exit variable behaves like the latter and not like the first. I do not know how to solve this.
I would greatly appreciate if you could help me out of this issue here.
Kind regards,
Frank

Hi,
no, it doesn't. It just returns the data for the node and not for the underlying nodes.
Frank

DontSaveSensitive; Key not valid for use in specified state error

I initially had my packages set to 'EncryptSensitivewithPassword' and usedthe config files. My job executes fine. But I noticed I was getting THE error "......Key not valid for use in specified state.....". So, I change the protection level
to 'DontSaveSensitive' , saved packaged ,build and re-imported it. And I still get the same result.
What am I doing wrong??   Package is on the same server where it was built.
I have a package in production that executes without the error. I made a change to the package (logging) in test and now it also encounters same error as the package referenced above.

created ssis package logged in as testsrvr\admin; tests fine.
      protection level - don't save sensitive
      use xml config files
move to production server logged in as prodsrvr\admin; tests fine in bids.
exec package via sql agent (runs under domain\prodsrvr account ). Both attempt same package
job attempt #1
type - cmdexec
run as - SQL Agent Service account
command - exec using dtexec.exe /SQL "\DS\DSU002A 586SSN_TO_SQL" /SERVER SQLDRK51 /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EW
receive error
Executed as user: ILSOS\sqldrk51. ... 9.00.4035.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved.    Started: 7:00:00 PM Error: 2010-08-30 19:00:00.33     Code: 0xC0016016
Source:       Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there
is a cryptographic error. Verify that the correct key is available. End Error Error: 2010-08-30 19:00:00.35     Code: 0xC0016016     Source:       Description: Failed to decrypt
protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
End Error Error: 2010-08-30 19:00:00.35     Code: 0xC0016016     Source:       Description: Failed to decrypt... Process Exit Code 0. The step succeeded.
Job Attempt #2
type SSIS
run as SQL Agent Service account
package source file system
package - I:\SSISProjects\DSU002 Viisage Data Transfers\Viisage Data Transfers\DSU002A 586SSN_TO_SQL.dtsx
no error
Executed as user: ILSOS\sqldrk51. Microsoft (R) SQL Server Execute Package Utility Version 9.00.4035.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved.    Started: 12:54:03 PM DTExec: The package
execution returned DTSER_SUCCESS (0). Started: 12:54:03 PM Finished: 12:54:08 PM Elapsed: 4.953 seconds. The package executed successfully. The step succeeded.

Getting error "URI index 0 is not valid" in Oracle Service Bus

Dear Friends,
I am receiving an error "URI index 0 is not valid" while executing Customization File in Oracle Service Bus. I am not able to figure out why it is happening. Please help.
Thank you.
Regards,
Palak Mathur

AbhishekJ wrote:
Change the:
<xt:value>
<tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">
<URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</URI>
<weight>1</weight>
</tableElement>
</xt:value>Section to:
<xt:value>
<tran:tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">
<tran:URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</tran:URI>
<tran:weight>1</tran:weight>
</tran:tableElement>
</xt:value>in your Customization File and try again.Hi Abhishek,
I did the same thing. Actually, the deployment team was getting this error and they called me up to find out. I analyzed and sent the following response:-
I was going through the Customization file. I removed all the elements from the file and started with only 1 envValueAssignments:-
+<cus:envValueAssignments>+
+<xt:envValueType>Service URI Weight</xt:envValueType>+
+<xt:location>0</xt:location>+
+<xt:owner>+
+<xt:type>BusinessService</xt:type>+
+<xt:path>CommonServices/Business Services/ServiceAddressV1RS</xt:path>+
+</xt:owner>+
+<xt:value xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema">0</xt:value>+
+</cus:envValueAssignments>+
The customization file got executed perfectly. Then I added another envValueAssignments and it worked fine as well.
Now, when I added
+<cus:envValueAssignments>+
+<xt:envValueType>Service URI Table</xt:envValueType>+
+<xt:location xsi:nil="true"/>+
+<xt:owner>+
+<xt:type>BusinessService</xt:type>+
+<xt:path>CommonServices/Business Services/ServiceAddressV1RS</xt:path>+
+</xt:owner>+
+<xt:value>+
+<tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">+
+<URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</URI>+
+<weight>0</weight>+
+</tableElement>+
+</xt:value>+
+</cus:envValueAssignments>+
+, I got the above error, ie URI index 0 is not valid. If you check each element then you will know that tableElement defines a namespace as xmlns:tran="http://www.bea.com/wli/sb/transports" which is neither being used by the node nor its child elements. Also the error in server logs was:-com.bea.wli.sb.transports.TransportException: URI index 0 is not valid.+
It stuck that we were doing something wrong here. I checked other elements in the same file and found that some of them were starting the node as <tableElement xmlns="http://www.bea.com/wli/sb/transports">. So, tableElements should be qualified with this namespace:-http://www.bea.com/wli/sb/transports. It was clear there was issue with qualified name of the element and hence I added the prefix "tran" and made entry as:-
+<tran:tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">+
+<tran:URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</tran:URI>+
+<tran:weight>0</tran:weight>+
+</tran:tableElement>+
When I executed the changed customization file it worked. I checked with few more elements and they all worked making me sure that this was the error.
So, the issue was that the OSB was not able to find any URI and for index 0 there was no URI available. Hence we were getting a weird error which was not at all user friendly. However, while making the OSb they must have thought that no one will make any manual changes (by hand in the file) and this error would be sufficient to tell that there is something wrong with the customization and we must regenerate the customization file.
Only solution that we do not receive this error in future is rather than making changes to the customization file manually we should use OSB console or scripts to replace the properties. Otherwise we need to be very careful while touching the Customization file.
Hope this helps.

Watch folder "render control file not valid"

I'm using cc 2014 on my main workstation and render nodes. I can't get the render engine to accept a job because I get the "render control file not valid" error when setting the watch folder. But, I can use the render engine on my main workstation and the job will start just fine. That leads me to believe its a permissions problem, but all of my network computers are set up to work as a 3d animation render farm and it all works pretty well with all computers being able to read and write to each other with full permissions.
Is there anything else I can look at that might help? Thanks in advance.

> "Hello - is there any one left at Adobe to help with this? "
This is a user-to-user forum, where people help out in their free time. If you want a guaranteed response from Adobe personnel, contact Adobe Technical Support:
http://www.adobe.com/support/contact

Activation error : context model node has not been bound to a model class

Hi All,
I have DC project, which i am able to run without error, But when i try to activate this DC project, I am getting below error in activation log : Please help me out, It's very urgent...
[wdgen] [Info]    Generating packages/com/ltli/crtmachineord/models/zp3019_dealer_default_valuesmodel/Zp3019_Dealer_Default_Values_Output.java
     [wdgen] [Error]   com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode Zp3019_Salesorder_Mac_Texts_Input [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Error]   com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode Output_Text [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Info]    com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode Output_Text [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
     [wdgen] [Error]   com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode T_Contract_Note_Text [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Info]    com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode T_Contract_Note_Text [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
     [wdgen] [Error]   com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode Zp3019_Get_Employee_Name_Input [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Error]   com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode Output_Name [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Info]    com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode Output_Name [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
     [wdgen] [Info]    com.ltli.crtmachineord.components.crtmachineordcomp.CustnoView --> Caption grp_equipmentnumber_Header: UIElement does not have a label
     [wdgen] [Warning] com.ltli.crtmachineord.views.longtextview.LongTextView --> TextEdit txe_LongText: UIElement does not have a label
     [wdgen] [Info]    com.ltli.crtmachineord.components.crtmachineordcomp.MatnoView --> Caption grp_equipmentnumber_Header: UIElement does not have a label
     [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label SalesDocType_Lbl [labelFor]: Value is not valid
     [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label SalesOrg_Lbl [labelFor]: Value is not valid
     [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label DistChannel_Lbl [labelFor]: Value is not valid
     [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label Division_Lbl [labelFor]: Value is not valid
     [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label SalesOffice_Lbl [labelFor]: Value is not valid
     [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label SalesGroup_Lbl [labelFor]: Value is not valid
     [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label Plant_lbl [labelFor]: labelFor is not set
     [wdgen] [Error]   com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> TextView txv_Ename [text]: Context element and property are not compatible
     [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label lbl_CustNo [labelFor]: labelFor is not set
     [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label lbl_ConsigneeTo [labelFor]: labelFor is not set
     [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label lbl_Pin [labelFor]: labelFor is not set
Thanks
Sandy

We could resolved the problem by creating new DC project
and copying the content of existing Dc project into new DC.
(Also created new activity for this new DC), Build & Deploy the project.
Now we are able to activate the new activity without any error.
Thanks
Sandy

Integration Kit for SAP 90 Day Eval Key Code Not Valid

I downloaded the Integration Kit for SAP 90 Day Evaluation from this site:
https://boc.sdn.sap.com/node/18962
However, the Key Code listed on the web site is not Valid.

Hi Jim,
I called customer service of Business Object and they advice me to post the question in forum and some one from technical support team will answer. Any update from tech support team is apreciated.
Thank you.
Regards
Pushparaj.

Get-Counter : The \\ServerNameHere\\SQLSERVER:Locks(_Total)\Lock Waits/sec performance counter path is not valid.

I have the following code:
Import-Module "sqlps" -DisableNameChecking
#####http://www.travisgan.com/2013/03/powershell-and-performance-monitor.html
function ExtractPerfmonData
    param(
        [string]$server,
        [string]$instance
    [Microsoft.PowerShell.Commands.GetCounter.PerformanceCounterSampleSet]$collections
    $monitorServer = "MonitoringServerNameHere"
    $monitorDB = "MonitoringDatabaseNameHere"
    $counters = @(
        "\$($instance):Memory Manager\Memory Grants Pending",
        "\$($instance):Memory Manager\Target Server Memory (KB)",
        "\$($instance):Memory Manager\Total Server Memory (KB)",
        "\$($instance):Buffer Manager\Buffer Cache Hit Ratio",
        "\$($instance):Buffer Manager\Checkpoint pages/sec",
        "\$($instance):Buffer Manager\Page Life Expectancy",
        "\$($instance):General Statistics\User Connections",
        "\$($instance):General Statistics\Processes Blocked",
        "\$($instance):Access Methods\Page Splits/sec",
        "\$($instance):SQL Statistics\Batch Requests/sec",
        "\$($instance):SQL Statistics\SQL Compilations/sec",
        "\$($instance):SQL Statistics\SQL Re-Compilations/sec",
        "\$($instance):Locks(_Total)\Lock Waits/sec"
    $collections = Get-Counter -ComputerName $server -Counter $counters -SampleInterval 1 -MaxSamples 1
    $sampling = $collections.CounterSamples | Select-Object -Property TimeStamp, Path, Cookedvalue
    $xmlString = $sampling | ConvertTo-Xml -As String
    $query = "dbo.usp_InsertPerfmonCounters_SQLServer '$xmlString';"
    Invoke-Sqlcmd -ServerInstance $monitorServer -Database $monitorDB -Query $query
#####ExtractPerfmonData -server "YourRemoteServerName" -instance "MSSQL`$SQLTest"
ExtractPerfmonData -server "ServerName1Here" -instance "SQLSERVER"
ExtractPerfmonData -server "ServerName2Here" -instance "SQLSERVER"
ExtractPerfmonData -server "ServerName3Here" -instance "MSSQL`$InstanceNameHere"
ExtractPerfmonData -server "ServerName4Here" -instance "SQLSERVER"
(I have 93 instances listed; here I just gave a sample of 4.)
For only one instance I get the following error message:
Get-Counter : The
\\ServerNameHere2\\SQLSERVER:Locks(_Total)\Lock Waits/sec performance counter path is not valid.
All of the instances should have been set up the same, so I am confused as to why this error only occurs on this one instance. I do not know where to look. Has anyone ever seen this type of error before?
lcerni

Here is the output of the first script:
CounterSetName
...       (eliminating non sql server counters here)
SQLAgent:Alerts
SQLAgent:Jobs
SQLAgent:JobSteps
SQLAgent:Statistics
SQLServer:Access Methods
SQLServer:Availability Replica  SQLServer:Backup Device
SQLServer:Batch Resp Statistics
SQLServer:Broker Activation
SQLServer:Broker Statistics
SQLServer:Broker TO Statistics
SQLServer:Broker/DBM Transport
SQLServer:Buffer Manager
SQLServer:Buffer Node
SQLServer:Catalog Metadata
SQLServer:CLR
SQLServer:Cursor Manager by Type
SQLServer:Cursor Manager Total
SQLServer:Database Mirroring
SQLServer:Database Replica
SQLServer:Databases
SQLServer:Deprecated Features
SQLServer:Exec Statistics
SQLServer:FileTable
SQLServer:General Statistics
SQLServer:Latches
SQLServer:Locks
SQLServer:Memory Broker Clerks
SQLServer:Memory Manager
SQLServer:Memory Node
SQLServer:Plan Cache
SQLServer:Query Execution
SQLServer:Replication Agents
SQLServer:Replication Dist.
SQLServer:Replication Logreader
SQLServer:Replication Merge
SQLServer:Replication Snapshot
SQLServer:Resource Pool Stats
SQLServer:SQL Errors
SQLServer:SQL Statistics
SQLServer:Transactions
SQLServer:User Settable
SQLServer:Wait Statistics
SQLServer:Workload Group Stats
...       (eliminating non sql server counters here)
lcerni

Default printer was not valid, switching to 'GetUnPrinter'

I recently deployed my web application to Red-Hat Linux and I'm receiving the following error: "Default printer was not valid, switching to 'GetUnPrinter'."
I pinpointed the line of code throwing the exception, which is: ReportClientDocument reportClientDoc = new ReportClientDocument();
I designed the report using CR4E. The exception isn't thrown on my local XP machine. I saw another forum topic with a similar issue (http://diamond.businessobjects.com/node/1245), but it wasn't helpful. Does anyone have any suggestions?
Thanks,
Kevin

You'll see similar error messages when you open a file in the Crystal Report Designer client application, and not just with the Crystal Report for Eclipse designer or the JRC.
The JRC uses the Java Print Service to retrieve printer information - this ensures that the fine placement of fonts and graphical objects are consistent across platforms.
If you specify a specific printer against which the rpt is to be designed, then it will look for the very same printer at runtime. If that printer is not available, then it will try using the default printer for the machine. If there is no default printer, then it will load a very simple dummy printer model - the UnPrinter.
The exception message is that - it's an explicit warning that the formatting of the report may differ from design time.
What CUPS and default printer installation does on your Unix machine is expose a default printer to the Java JVM Print Service.
Sincerely,
Ted Ueda

Disk utility reports "unused node is not erased" after installing 1TB HD

Hi there,
I just installed a brand new 1TB HD into a 2006 Intel iMac. I booted from the Snow Leopard installer DVD and tried installing the OS, but I received a kernel panic. I rebooted from the installer DVD again and ran Disk Utility which reported multiple instances of "unused node is not erased" and could not repair the disk. I re-partitioned the disk but each time Disk Utility gave the same error. I rebooted from the DiskWarrior DVD and rebuilt the directory (DW found no errors). I then rebooted from SL DVD again and ran Disk Utility which found the same "unused node is not erased" errors but this time was able to repair them! I'm now trying to reinstall the OS for a second time.
I'm wondering from this bizarre behaviour whether
a) I have a faulty (new) HD
b) there might be something else wrong with my mac causing these errors.
Any assistance would be greatly appreciated!
Cheers,
Greg

Well, I attached another good external drive via FireWire, booted the 2006 iMac from the SL installer DVD, partitioned it with DU, then ran DU Repair Disk, and Disk Utility immediately gave me "unused node is not erased" errors and was unable to repair the drive.
I attached the same good external drive via FireWire to another Mac and repeated the same procedure: this time DU gave me no errors at all.
I'm going to assume my 2006 iMac has a faulty logic board or SATA controller (with cost of repairs probably more than the computer is worth). Would you agree?
Thanks again!

10.4.2 Firewire Node ID not valid

Similar Messages

Maybe you are looking for