10.4.3 and M-Audio issues

Since installing 10.4.3 I cannot get Logic Express 7.1.1 to work using the M-Audio Delta 66. The drivers worked fine in 10.4.2. I get digital stuttering audio when using the driver. I have had several kernal panic issues when just launching Logic. Complete system crash. I have upgraded the driver to the new 2.04 and still no improvement. Going back to old drivers does not work either. Using built in audio works fine, but who wants that? Dual 867 MDD G4.

10.4.3 broke M-Audio drivers, that's been reported several times on different forums since last week. I think I've seen that an older version works but I can't remember which one. You might want to do a search in the Logic Pro discussions. M-Audio are probably working on a fix, your best bet is probably contacting M-Audio customer support.

Similar Messages

Facebook and streaming audio issues

I like using Facebook and stream audio from my favorite radio stations! However, I am running into adobe flash upgrade issues!!!! I can bring up Facebook but I can't run certain programs within it. I can bring up my favorite radio stations but won't let me stream audio!!!! Any solutions?

What exactly are your issues?
I had an issue where every image found on the blog template was showing up instead of the actual image that represented the blog post. My fix was to make sure of the following:
1. Blog image needs to be small in file size. Many bloggers post images that came straight off their camera and I found that the share tools will grab the most accessbile and light-weight files first. If the image is too big then it won't grab it at all. The share tool grabs the smallest and fastest loading, top-most in the code image first, which means the images found on the template of the blog.
This issue occurs at WordPress too, so it is not restricted to BC but rather the tools provided to share.
2. Try to avoid putting the image inbetween <p></p>'s, when I pulled mine out of the the paragraph format, they were found quicker.
3. Avoid having the image lead off the blog post list before the bodypreview, if you can at all just show the image on within post detail page if you can. I know that having an image in the list helps, but then just put the whole blog in the list, like WP does. Problem here is that most share tools on the list have a problem diciphering what to share, so it shares the whole page, giving everthing a share count. WP does this better. They isolate the independent listings and provide isolated share tools for each list.
Wait a week and the technology will change again.
Good news is that the element that Facebook offers to share a page on the web will be featuring the option to upload an image to accompanying the sharing of the post. You can see this happening at Facebook already when you drop in the link of the post into a news feed.
I hope this helps.

Adobe Flash Player - Green Screen and Jumbled Audio Issue

I currently have gotten my new PC and I watched to watch some videos online.
Some sites like youtube I seem to have no issues, but with others. The video will work till random points and then suddenly it will start to go green screen. The audio will become jumbled as if it were skipping through the reset of the video.
I have tried all types of solutions I have looked up and even tried some of the troubleshooting on the adobe flask troubleshooting list.
yet I am still unable to figure out this issue.
Build:
ASUS MAXIMUS VII FORMULA/WATCH DOGS LGA 1150 Intel Z97 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard
Intel Core i7-4790 Haswell Quad-Core 3.6GHz LGA 1150 84W Desktop Processor Intel HD Graphics 4600 BX80646I74790
GeForce GTX 980
G.SKILL Ripjaws Z Series 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1866 (PC3 14900) Desktop Memory Model F3-14900CL8Q-16GBZM
I think those are all the parts that you may need to know to maybe help me? I'm not sure.
I am running currently Windows 7 64 Bit as well.
Everythings up to date and is working fine so I just can't figure this out.
I am also using Google Chrome for my web browser.
I would appreciate any help in getting this fixed as it is becoming an annoyance and is the first time I have ever experienced this issue.
My old PC didn't have issues like this. =(

Please try the solution outlined in the post below and let us know how it works for you.
http://forums.adobe.com/message/4865912#4865912
Thanks,
Chris

Premiere Pro 6 and Audition Audio issues with Kona Lhi

Hello,
When I have Adobe Premiere Pro and Adobe Audition open at the same time, and I send an audio clip from Premiere Pro to Audition for editing, I have no sound in Audition. If I have only one of these programs open, the audio works fine in both. Since these programs are linked together it is essential that I have audio in both, even though, both programs are open. Is there a driver fix or some other way to get Premiere Pro to release the Kona Card LHi when switching to Audition? I am using a Mac Pro 2 x 2.4 6-core 24MB Ram 1333 DDR3 and Quadro 4000 with Kona Lhi Drivers 10.4.4 with Adobe presets.
Thanks,
Dunamis Starr | TV Department

Hello Dunamis,
Unfortunately this is a known issue with the Kona card. I know this is something they would like to fix but I'm uncertain on the timeframe.
There are times when this workflow will work without issue but when it goes into the bad state you will need to quit the apps.
Peter Garaway
Adobe
Premiere Pro

[solved] Wifi and Video /Audio issues with Yosemite upgrade

Apple support recommend you call them to solve your issue as they want to report all instances to engineering. They solved my issue (for now)
Symptoms on Macbook Pro Retina 16GB 512GB SSD - late 2013 :
1. any online audio or video stutters when playing - Youtube, Vimeo etc
2. wifi cuts out - only reconnects if I turned off/on wifi
3. Bluetooth keyboard / magic mouse disconnects
Allegedly, during the update, something can happen with users accounts freezing. Therefore, a simple fix solves the issues:
1. Shut down your Mac.
2. Start Mac holding down SHIFT key (until desktop appears) - log in with your problem user account (Safe mode for those not familiar)
3. Open Safari and navigate to Youtube - I played a video - the sound was not available but does not matter.
4. Shut down Mac
5. Start Mac in normal mode
All should be fine now. If not call Apple support - that's what they suggest

Apple support recommend you call them to solve your issue as they want to report all instances to engineering. They solved my issue (for now)
Symptoms on Macbook Pro Retina 16GB 512GB SSD - late 2013 :
1. any online audio or video stutters when playing - Youtube, Vimeo etc
2. wifi cuts out - only reconnects if I turned off/on wifi
3. Bluetooth keyboard / magic mouse disconnects
Allegedly, during the update, something can happen with users accounts freezing. Therefore, a simple fix solves the issues:
1. Shut down your Mac.
2. Start Mac holding down SHIFT key (until desktop appears) - log in with your problem user account (Safe mode for those not familiar)
3. Open Safari and navigate to Youtube - I played a video - the sound was not available but does not matter.
4. Shut down Mac
5. Start Mac in normal mode
All should be fine now. If not call Apple support - that's what they suggest

Alsa and pulse audio issue

I am having 2 problems.
Teamspeak 3 Mic doesn't work
Pianobar no audio.
I have a default alsa audio error for pianobar and ts3 no idea, how can I narrow down why these do not work as they should?

My sound works fine, but apps are choosing pulse and alsa, I need to get a default sound, I got confused since the config files are not where the wiki says and thought I should ask for help.
I think I need to make pulse default, just no idea how to do that and the config files seem to be missing.
edited /etc/libao.conf changed it to pulse and removed dev=default, pianobar works on my other laptop, now i have to reboot and see if it works with teamspeak and pianobar on this laptop.
with some more google searching my sound card and alsa, i found a fix for my microphone too.
i have a dell inspiron 1545 with idt audio.
things that i followed to fix my problem,
pianobar in arch wiki, but found you only need to remove dev=default and the sound works fine, and a post in the ubuntu forums since the sound card was the same the solution worked.
source
http://ubuntuforums.org/showthread.php? … st10214558
cd /etc/modprobe.d
sudo gedit alsa-base.conf
copy/paste
options snd-pcsp index=-2
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
options snd-hda-intel model=dell-m4-1
options snd-hda-intel enable_msi=1
options snd-hda-intel position_fix=1 enable=yes
save and close
also i was wondering if anyone knew how to redirect pcm audio directly to pulse, for one of my games medal of honor allied assault, i have to modprobe snd-pcm-oss for sound when i log in and would like to have it run through pulse so maybe the sound would be better, the openal.so that came with the loki beta3 installer is locked to the game so using the openal from arch official doesn't work, go the sound working on this with.
installed:
mlocate
alsa-oss
lame (mp3 decoder probably not needed)
ran:
sudo updatedb
and i have gnome-session-properties set to run:
sudo modprobe snd-pcm-oss
if that fails i have alsa-oss installed so running it like so works
aoss ./mohaa
to enable the sound currently.
yes i know it is old, yes i know the project is dead and not updates, thats why i am working on solutions! lol
Last edited by fallen00sniper (2013-03-13 06:20:14)

Mavericks 10.9.1 Upgrade = Audio issue (lost 5.1 through HDMI)

Hello guys and gals,
I've Macbook pro 15" retina connected as follow
Macbook Pro -> Sony HT -> LG LED TV (55LA7400)
The connection is made via HDMI port. Everything was working fine, no issue when I was using previous OS. Apps such as XBMC, etc was able to output 5.1 fine.
I just upgraded to 10.9.1 and experience Audio issue.
With TV OFF: I was able to see the 5.1 Selection via Audio Midi Setup. Using the built in test feature, was able to check all 6 speakers fine.
However, as soon as I turn on the TV, Macbook screen flickers (as usual when ie tries to recognize the TV and enable Video out) I can only select 2CH via the setup.
This apparently, wasn't the issue prior to the upgrade.
Please advise,
Thanks

I should have said - I tried that earlier but I just get:
'This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.'
My 17 inch Macbook Pro is pretty old (2009) and I took it over from my son 3 years ago so I wasn't involved with the initial installation.
Thanks.

More Audio issues...

Along with the sounds / tones truncating / cutting off, I was listening to some mp3's today and the sound was constantly cutting in and out of stereo mode. Left ear worked most of the time, right ear worked maybe 1/4th of the time. Whatever happened to the sound coding in the latest update, it needs to be fixed.
Post relates to: Pre p100eww (Sprint)

I have searched in vain for an answer to this
problem. I have a 15" Powerbook Aluminum, 1.5 Ghz G4
w/ 1.25G RAM and 10 GB available on the harddrive.
I am working with iMovie 6 with all my movie files on
a LaCie external drive connected using a FW800
connection. 195GB capacity, with about 20GB being
used up with iMovie files.
Here's my issue. When I import video alone into a
project, we have joy. When I try to add audio clips
(either AIFF or MP3), the playback slows to a crawl,
the video is severely stuttery and the audio is
distorted and plays at about half speed (like playing
a 33rpm LP at 16rpm).
If I delete the video and import the audio clips,
same issue w/slowness and distortion.
If I import the audioc clips singly, they play and
sync well with the video to a point, but there's a
threshhold at which the playback begins to degrade
and the audio issues return.
Very frustrating. Who can point me to some likely
culprits? Of, and this began happening in iMovie 5. I
was hoping iMovie 6 would solve. no joy.
Thanks all - Joel
OK - here's an update. I dumped my caches, fixed permissions, made changes to QT settings and reset the MIDI settings and the result? The audio is now running fine BUT the video is now not running (or at least ex-treme-ly sl-ooooooow-ly).
Any thoughts folks? I'd be eager to hear your input!

Audio Issues Upon Importing - the more I have, the slower they play

I have searched in vain for an answer to this problem. I have a 15" Powerbook Aluminum, 1.5 Ghz G4 w/ 1.25G RAM and 10 GB available on the harddrive.
I am working with iMovie 6 with all my movie files on a LaCie external drive connected using a FW800 connection. 195GB capacity, with about 20GB being used up with iMovie files.
Here's my issue. When I import video alone into a project, we have joy. When I try to add audio clips (either AIFF or MP3), the playback slows to a crawl, the video is severely stuttery and the audio is distorted and plays at about half speed (like playing a 33rpm LP at 16rpm).
If I delete the video and import the audio clips, same issue w/slowness and distortion.
If I import the audioc clips singly, they play and sync well with the video to a point, but there's a threshhold at which the playback begins to degrade and the audio issues return.
Very frustrating. Who can point me to some likely culprits? Of, and this began happening in iMovie 5. I was hoping iMovie 6 would solve. no joy.
Thanks all - Joel

I have searched in vain for an answer to this
problem. I have a 15" Powerbook Aluminum, 1.5 Ghz G4
w/ 1.25G RAM and 10 GB available on the harddrive.
I am working with iMovie 6 with all my movie files on
a LaCie external drive connected using a FW800
connection. 195GB capacity, with about 20GB being
used up with iMovie files.
Here's my issue. When I import video alone into a
project, we have joy. When I try to add audio clips
(either AIFF or MP3), the playback slows to a crawl,
the video is severely stuttery and the audio is
distorted and plays at about half speed (like playing
a 33rpm LP at 16rpm).
If I delete the video and import the audio clips,
same issue w/slowness and distortion.
If I import the audioc clips singly, they play and
sync well with the video to a point, but there's a
threshhold at which the playback begins to degrade
and the audio issues return.
Very frustrating. Who can point me to some likely
culprits? Of, and this began happening in iMovie 5. I
was hoping iMovie 6 would solve. no joy.
Thanks all - Joel
OK - here's an update. I dumped my caches, fixed permissions, made changes to QT settings and reset the MIDI settings and the result? The audio is now running fine BUT the video is now not running (or at least ex-treme-ly sl-ooooooow-ly).
Any thoughts folks? I'd be eager to hear your input!

Bootcamp 3.1 and imac windows 7 64bit update not installing. Audio issues!

After many days of work getting the windows 7 working in bootcamp in my imac 27 (still with audio issues) I eagerly awaited the bootcamp update and imac updates.
Neither will install.
Then I find that according to tech support as of now I have to reinstall Windows 7 again for the updates to work!
It took me 5 full 8 hours days to get all my scientific programs installed and working, now I find I can't even simply update the drivers I need. I don't want to reinstall.
My only issues are audio.
Here they are:
1) The headset jack works fine on the Mac side, but in Windows 7, it causes the i7 intel CPU to go crazy. There is no CPU spike on the mac side.
2) The headset jack in the imac is a trrs jack. The same as in the iphone, a tri-band jack that has three bands, two audio out channels and one mic in channel. A trrs headset works fine on the mac side with using the headset mic (as in iphone) rather than the built in mic. (this provides much better quality for sound recording). I don't want to use a usb mike.
In Windows 7 the mic part of the trrs headset does not work.
3) In Windows 7 when going into audio devices recording, no audio mixer shows up, so when I do video or audio screen capture the only way to capture the sound is through the speakers and then back through the imac built in mic, rather than directly through the unit. (terrible sound quality) On the mac side the mixer element works fine.
Now I find from other imac users that even the new updates for the imac on windows 7 don't address and fix the audio issues. I am sure not going to go through 5 more days work only to find the audio issues still don't work.
I need these audio aspects to work properly though!
I have tried to get drivers for the cirrus logic audio card, but guess what there are none available and cirrus logic doesn't even recognize the board or offer drivers.
I have many windows programs I must have for my scientific research!I bought the top of the line Imac with all the bells and whistles because Apple promised that the machine could run Windows 7 in bootcamp natively!
It doesn't. This has been a nightmare of problems.
Is Apple going to step up to the plate and make good on their promises?
Does any one have a fix for any of the audio issues, or know how to install the new drivers without a complete reinstall of Windows?
Installing a few sound drivers and software should not require a complete reinstall. Getting the proper drivers for the headset jack audio in and audio out jack should be the most basic of fixes. Making the audio mixer work should be elementary.
If you are an Apple tech person or an Apple user that can help on these issues, please do!
Thanks, Dr. Duke
An American profesor in Europe.
PS I will post this under Imac windows 7 updates without a reinstall and under
imac Sound issues.

On another thread a few people have responded saying that their imac has the same situation, the cpu is going crazy and the imac gets hot with headphones or speakers plugged in. But this doesn't happen in the mac side.
If you have an late 2009 imac and don't have these audio issues, let us hear from you. If you don't, lay out the problem here.
Here is my last two cents in to the inquiry.
Not only does the cpu run crazy but the imac 27 gets very, very hot. Since I unplugged the headphones, it runs much, much cooler.
Certainly, some Mac engineers should take care of this problem, it seems it is universal on all the imac 27's and from what I gather, the smaller screened cousins too.
Also, we certainly want a stereo mix option for audio in or out, or what is called "what you hear" or wave out. Imac is supposed to be much geared to multimedia apps.
Finally, the mic jack part of the trrs set up MUST be fixed! A lot of manufacturers are going to headset combo jacks as they call them, mic in and stereo out on the same tribanded plug. But, the old single jack for mic in and single jack for stereo out are two tiny parts of the hardware and super inexpensive for the manufacturer. Why in the **** to go to the "advanced" triplug if the **** thing doesn't work.
Mac has a great reputation. I hope they remedy these problems right away.
Anyone whose imac 27 or 24 whose headset plug is working correctly. Let us know! I don't think anyone's is, but I think that few people understand that their cpu is running so much faster with the plug in, plus few even understand the combo jack and the triband, or trrs audio jack! Out of 4 audio technicians I talked to, not one of them knew what a trrs jack was or that you even have a mic in jack as part of the headset jack!
When I told one senior that it worked on the Mac side, he didn't believe for a while, thought my sound might be recorded from the onboard mic, but I proved it to him by tapping iaudibly on my iphone mic headset and and it showing up in garage band clearly and listening to big difference in audio.
As for a usb audio adapter, I am in a neon light environment and find that those adapters are more sensitive to electrical interference. Besides I want to use the headset jack as it was meant to be used!
Thats it.
Again, if anyone using an imac 27 and windows 7 64 or 32 doesnt have these problems, let us know! We are all anxious for a fix!
Best to all!

My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested. How can there be audio issue for all these devices at the same time?
As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
Peace,
P. Dreadie

HP Slate 21 audio issue after KitKat update and reset

I have upgraded my HP Slate 21 from JB to KK. Now the sound quality is very bad!
I came directly from xxx.11 kernel and made factory reset but didn't get a good result. Please how can I fix this tremendous issue?

Hey @PauloTxR ,
Welcome to the HP forums.
I understand you're experiencing issues with sound quality on your Slate 21 PC.
Please review the following thread: HP Slate 21 Kit Kat OTA Update Fix for Audio Quality and LAN Connectivity.
This fix will resolve audio issues of a software nature resulting in the KitKat update. If your issue persists after applying the specific update mentioned in this thread and have done a factory reset, the issue is likely hardware related and not the result of the KitKat update.
If you have done the above and continue to have problems please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
Thanks.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Merged clips and modified audio channels bug/issue

My problem is that if I create a merged clip and modify it's audio channels Premiere (both CC and CC2014) does not respect the modification under specific circumstances. These circumstances are: if I use keyboard shortcuts or the source window buttons for overwrite/insert to cut the merged clip into a timeline. However, if I drag & drop the clip from the source window or from a bin into the timeline Premiere will respect the audio channels set through modify audio channels.
Here are steps needed to create my problem. You will need a video clip and an audio clip with at least two channels to reproduce this.
1. Create a merged clip from the video and audio. Does not matter if you have "Remove audio from AV clip" enabled or not.
2. Right click on the merged clip in the bin and select Modify -> Audio Channels.
3. Set the merged clip's audio channels to Number of Audio Tracks: 1, Channel Format: Mono. Set the source channel for Audio 1 to anything except Channel 1. Click OK.
4. Make sure you have the merged clip open in the source monitor. Use keyboard shortcuts (. or ,) or the insert/overwrite buttons in the source monitor to cut the clip into a sequence.
5. The merged clip in the sequence will use channel 1 for audio, even though it has been set to use another channel.
6. Now try drag & dropping the merged clip from either the source monitor or from a bin into the sequence. It will now use the audio channel that has been set through modify audio channels.
My workaround is to use drag & drop for now for affected clips, but in the long run this is a pain in the backside.
My question is if this is something that affects other users as well. And while I'm waiting for a fix, if anyone has any suggestions on how to get modified audio channels to work properly, I will gladly listen.
I have filed a bug report for this. I have reproduced this on multiple Windows 7 machines with Premiere Pro CC and on two Macs with both CC and CC 2014.
EDIT to add: I have been in discussion with Rameez from Adobe about this through the support chat and have been told that this is working as intended. He suggested I post a thread about it to see how other editors feel about the functionality. I personally feel that the way it works now makes no sense at all. If others feel the same way, maybe this issue can be fixed in a future update. So please make your voice heard.
EDIT to add: In most usage this might not be an issue at all. But if for example you have external audio on multiple channels and to make sure you have a clean timeline, you wish to remove extra tracks from your merged clips and those extra tracks happen to be any track before the last one(s), you will find that editing the merged clip in in any other way than drag & dropping it in the sequence will result in you losing those last tracks instead of any tracks in the middle that you have disable through modify audio channels. I would think that the audio channel modifications should work no matter what way you cut the merged clip in.
Message was edited by: Jaakko Rinne

Going to try, but here is my workflow and have not encountered any problems until this last P/U days footage. I've been doing things this way because I found having all files in the project was causing it to crash constantly when I was working. I have a new I7' processor IMac with 24 gigs of RAM. And since Premiere does not allow you to have multiple projects open at the same time (Wish this would change. Avid and FCP both allowed multiple projects) I have to do things this way.
Pre-workflow Project File
Label all Video and Audio files to match Scene #'/Takes
Set in points on all video and audio to reflect slate
Merge Clips
Working Project File
Import only Merged Clips into Project. Either via import or copy/paste
Now I've done this workflow from just about the very beginning. Deleting all of the original source video and all audio clips from my working project so only my bins containing my merged clips remain. Have had no problems and edit has been smooth. Did a pickup day last week, followed same steps as I've done in the past, imported the merged clips into my working project and the clips have the audio set to none by default. Now once I go into the sequence I can manually set it and it's there but I cannot play audio in the source monitor which is how I edit, there's no reason I should have to go back to the crappy FCP way of editing doing the copy and paste from a sequence.

Captivate 7 and Audio Issues

Hi, I have been having with audio files in Captivate 7 when changing audio files for a specific slide. If I use the F6 functionality, sometimes the new audio file will be attached, sometimes it won't, and sometimes I will hear both audio files.
If I go into the library and remove all the audio files without first removing from the individual slides, sometimes the audio file will play on the slide when published. I cannot remove the audio file because I can see it in the library or on the film strip.
If I first remove the audio files from the slide, then remove the audio file from the library the file is definitely removed from the project.
Is this a bug in Captivate 7? Is there another way to ensure that the audio files have been updated without jumping through hoops. I've had a few projects I've had to recreate because of the audio issues.
thanks,

Welcome, Bob,
Each powerpoint slide will be converted in a mini video. You will have to make a parallel PPT, where you change the click animations to timed animations if you want the user in the CP-file to have to click only once.
Another approach would be to use Adobe Presenter, and the user could then click to advance on each animation.
Lilybiri

TIMECODES are important for audio and video sync issues

Hello, just wanted to pass on what I learned so that others can avoid the trouble that I've had to go through. Perhaps this may help someone who is stuck on the launch pad. :)
BOTTOM LINE: Info for the beginner. Audio and video not in sync in Premiere Pro CS3 V3.2.0
PROBLEM: Capture works great it seems. When I go to the folder that contains the captured file and view in Windows Media Player audio and video are in sync. BUT when viewing the video asset in the source and program monitors, the audio and video are not in sync.
SOLUTION:
Before capturing a tape make certain the following is checked:
(1) Edit->Preferences->Capture->Use device control timecode
(2) Edit->Preferences->Device Control->Options->Timecode Format
(3) Project->Project Settings->General->Video->Display format
As for the devices timecode choose something other than Auto Detect. Then match the project timecode with what was chosen during capture. The projects display format could of course be set to frames.
I searched everywhere for audio and video sync issues in google, adobe forums, F1 help, and hv20.com and everyone was talking about:
(1) Presets: 1080p30 vs. 1080i30 (60i).
(2) brakes in the tape where timecode for the audio and video get misaligned during capture.
But choosing the correct hardware settings and timecodes to solve audio and video sync issues never popped up.
MY HARDWARE: Canon HV30, HDV

>Audio and video not in sync in Premiere Pro CS3 V3.2.0
Must be an HDV only issue because my synch is always perfect.

10.4.3 and M-Audio issues

Similar Messages

Maybe you are looking for