10.4.3 not mounting Samba shares

I am having problems connetcting to the SMB Shares on out server. The Server is running Fedora 4 and Samba 3.0.14 I have attached the server logs to show what is happening when I try to connect. Basically I cannot connect to the server or browse the server since it says that I am already connected to the share but the share shows up no where. I cannot also unmount the share or eject it if it decides to show up. I have completely re installed 10.4 and ran the updates via downloads not the software updater. I am not having any other connectivity issues such as email or internet access.
Any help would be great thanks.
Server Logs:
[2005/11/21 10:49:00, 1] smbd/service.c:makeconnectionsnum(648)
quicksilver-500 (192.168.0.130) connect to service design initially as user production (uid=500, gid=500) (pid 28394)
[2005/11/21 10:49:00, 3] smbd/secctx.c:set_secctx(288)
setting sec ctx (0, 0) - secctx_stackndx = 0
[2005/11/21 10:49:00, 3] smbd/reply.c:replytcon_andX(456)
tconX service=DESIGN
[2005/11/21 10:49:00, 3] smbd/process.c:process_smb(1091)
Transaction 4 of length 39
[2005/11/21 10:49:00, 3] smbd/process.c:switch_message(886)
switch message SMBtdis (pid 28394) conn 0x96d8520
[2005/11/21 10:49:00, 3] smbd/secctx.c:set_secctx(288)
setting sec ctx (0, 0) - secctx_stackndx = 0
[2005/11/21 10:49:00, 3] smbd/secctx.c:set_secctx(288)
setting sec ctx (0, 0) - secctx_stackndx = 0
[2005/11/21 10:49:00, 1] smbd/service.c:close_cnum(836)
quicksilver-500 (192.168.0.130) closed connection to service design
[2005/11/21 10:49:00, 3] smbd/connection.c:yield_connection(69)
Yielding connection to design
[2005/11/21 10:49:00, 3] smbd/secctx.c:set_secctx(288)
setting sec ctx (0, 0) - secctx_stackndx = 0
[2005/11/21 10:49:00, 3] smbd/process.c:process_smb(1091)
Transaction 5 of length 43
[2005/11/21 10:49:00, 3] smbd/process.c:switch_message(886)
switch message SMBulogoffX (pid 28394) conn 0x0
[2005/11/21 10:49:00, 3] smbd/secctx.c:set_secctx(288)
setting sec ctx (0, 0) - secctx_stackndx = 0
[2005/11/21 10:49:00, 3] smbd/reply.c:reply_ulogoffX(1249)
ulogoffX vuid=100
[2005/11/21 10:49:00, 3] smbd/process.c:timeout_processing(1336)
timeout_processing: End of file from client (client has disconnected).

What do you mean 'upgraded Fedora'?
What part?
(I have a similar problem)

Similar Messages

Yosemite 10.10.1: Finder/CIFS mount problem: wrong folder count/folders not shown @samba shares

Hello to all,
we have several MacBook Pro (15" MBP Retina 2012/13"MBP Retina 2014) running. After upgrading to Yosemite 10.10.1 we had one nightmare after the other.
Most problems could be solved with 3rd party software upgrades but there are several problems with the operating system itselve which can not really be called a professional productive system at the moment...
Ok., one thing after the other...here is one of our biggest problems:
After upgrading from Mavericks or Mountain Lion to Yosemite 10.10.1 the CIFS/SMB mounts to our samba 3.x servers, running on Ubuntu Linux LTS 12.04 makes trouble. We could mount the server shares but after browsing with the Finder the beach ball occures and the Finder hangs forever. Sometimes we could not refresh the Finder, killing the process ended in a complete hang-up of the system which ended in a switch off death blow. This is not amusing because we have 30Tb of customer data there, which has to be worked out.
We heard about the SMB3 protocol which will be used per default in Yosemite and so we decided after some testings to upgrate our Ubuntu servers to the latest LSF 14.04. release with samba 4.1.6 installed. There was no message from Apple for this SMB protocol release upgrade, never heard something related to Yosemite (Why?).
Ok, after these server upgrades and disabling most of the Spotlight functions the performance to the CIFS shares was a little bit better as before but now we have another problem with the Finder...if you browse to the shares there are folders missing which have lots of files in it. For example there is a folder with 60 subfolders and 3562 files on the first level in it, the Finder shows 220 files and 15 folders. The Terminal shows a different count with "find . -maxdepth 1 -type d | wc -l" or "find . -maxdepth 1 -type f | wc -l" but there is also a difference to the original file and folder count. It doesn`t matter if the clients are connected via WiFi or Gigabit Ethernet. We have no access problems. We have the same behavior if we set the files and folders to 0777 permissions on the servers. The deletion of the preferences files of the users on the MacBooks does not solve the problem. If we use the "Go To Folder" option and type the path to a folder which is not shown in the Finder you get an result or not. But it is also possible that the result is not correct and there are also still files or subfolders missing.
In my opinion this is a timeout problem and a "special SMB3 protocol interpretation" which is buggy. We have one hint found in /var/log/system.log:
"Jan 23 14:35:49 wsosx33.clients.getcom.de KernelEventAgent[69]: tid 54485244 type 'smbfs', mounted on '/Volumes/customersdata2015', from '//x144067:@srvlxp013.servers.getcom.de/customersdata2015', not responding"
We had no problems with Mavericks at all, we still have no problems with Windows 7 Pro/Ultimate, Windows 2008R2 (native or virtual) or Linux Mint 17/17.1 clients, neither with samba 3.x nor with our actual environment and different newer samba releases.
We believe that this is a big bug in Yosemite, but we cannot go back to Mavericks because of incompatible TimeCapsule backups. Our workarround at the moment is that we have installed Linux Mint on our MacBooks to get 80% of our daily jobs done, rest has to be done with Windows 7 installed over virtualbox @Linux.
We have no clue at the moment how to solve this problem, the samba logs do not give any hint. The access from other operating systems is perfect and very fast, but not with Yosemite. We checked different tips found in the internet but nothing helped.
Does anybody has another idea to get Yosemite working or should we keep Linux Mint until Apple will provide a CIFS/SMB patch and going on with our workaround solution, which is productive at the moment ??? Our staff is not amused and wants one solution and not this workaround with two operating system. We have to decide wether we wait until Apple will get this fixed or we have to switch to Microsoft Windows (which is a No Go for me, but I will not be asked...).
Thanks in advance
C.

Hi William,
thank you for your response.
As you can read in my post I talked about CIFS/SMB.
It makes no difference if we mount the share over CIFS or SMB.
Folders with lots of files will not be shown even if we use SMB3 or an older protocol.
As mentioned I believe this is a timeout problem.
Does anybody know how the CIFS/SMB timeout setting in Yosemite could be changed?
Kind regards
C.

Unable to mount samba share file for xbox 360

I want to be able to stream music from a directory in my arch linux computer (xfce4) to my xbox using samba on a local network using ethernet cables and a router not connected to the internet. I've been able to get samba to startup and I see the folder "share" in my network tab in thunar, but I am currentlly unable to mount that folder. I haven't been able to get the xbox to recognize my arch computer or visa versa.
Here is the configuration I am running as of now:
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
workgroup = XBOX
# server string is the equivalent of the NT Description field
server string = "Samba Server"
# Security mode. Defines in which mode Samba will operate. Possible
# values are share, user, server, domain and ads. Most people will want
# user level security. See the Samba-HOWTO-Collection for details.
security = user
[share]
comment = music for xbox
path = /home/ricky/Music
browsable = yes
guest ok = yes
read only = yes
create mask = 0777
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
I did a chmod -r 777 on the ~/Music directory already and I still haven't been able to mount it. I have read in the wiki that creating a /mnt/xboxshare directory, for example, would actually mount the share directory and allow the xbox to share. However, I would rather just use the directory I specified instead of creating another directory. Has anyone else experienced this problem or have any advice for me?
Here is some additional information:
I do have to input a password when I issue this command
$ smbclient -L \\RG_ARCH
Enter password:
Domain=[XBOX] OS=[Unix] Server=[Samba 3.6.8]
Sharename Type Comment
share Disk music for xbox
IPC$ IPC IPC Service ("Samba Server")
rg Disk Home Directories
Domain=[XBOX] OS=[Unix] Server=[Samba 3.6.8]
Server Comment
RG_ARCH Samba Server
Workgroup Master
XBOX RG_ARCH

I was wondering whether it had anything to do with the network I was using. The router I am using can't access the internet and I am using the basic 192.168.1.X setup with 255.255.255.0 as the mask.
My computer has an ip of 192.168.1.2 and the xbox has an ip of 192.168.1.3. However, I am still unable to ping the xbox or even see it show up in the network. I did notice that whenever I am using another router that is connected to the internet, I can see other windows based computers in the network tab in thunar under "windows network"
Also, I do have a username and password associated with the samba setup.. so I assume maybe that has something do with it. I checked the permissions of the share folder and it was root:root with read and write permissions. I know samba is working fairly well.. but for whatever reason I can't get the xbox to connect even while it is on the same local network.

Mounting samba share starts avahi, ssh and sftp at client

The problem is at the client. When i mount a samba share (with # mount), avahi is started, which starts ssh and sftp. This is wrong on many levels.
Not sure how long this has been going on, someone else already asked this on stackexchange on 11.2.15, but didn't get any answers.
Journal output immediatly after mounting (hostname, ip etc. removed):
Mär 18 01:35:51 hostname dbus[434]: [system] Activating via systemd: service name='org.freedesktop.Avahi' unit='dbus-org.freedesktop.Avahi.service'
Mär 18 01:35:51 hostname systemd[1]: Cannot add dependency job for unit boot.automount, ignoring: Unit boot.automount is masked.
Mär 18 01:35:51 hostname systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Mär 18 01:35:51 hostname systemd[1]: Starting Avahi mDNS/DNS-SD Stack Activation Socket.
Mär 18 01:35:51 hostname systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Mär 18 01:35:51 hostname avahi-daemon[2583]: Found user 'avahi' (UID 84) and group 'avahi' (GID 84).
Mär 18 01:35:51 hostname avahi-daemon[2583]: Successfully dropped root privileges.
Mär 18 01:35:51 hostname avahi-daemon[2583]: avahi-daemon 0.6.31 starting up.
Mär 18 01:35:51 hostname avahi-daemon[2583]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Mär 18 01:35:51 hostname dbus[434]: [system] Successfully activated service 'org.freedesktop.Avahi'
Mär 18 01:35:51 hostname systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Mär 18 01:35:51 hostname avahi-daemon[2583]: Successfully called chroot().
Mär 18 01:35:51 hostname avahi-daemon[2583]: Successfully dropped remaining capabilities.
Mär 18 01:35:51 hostname avahi-daemon[2583]: Loading service file /services/sftp-ssh.service.
Mär 18 01:35:51 hostname avahi-daemon[2583]: Loading service file /services/ssh.service.
Mär 18 01:35:51 hostname avahi-daemon[2583]: Joining mDNS multicast group on interface enp1234.IPv4 with address myip.
Mär 18 01:35:51 hostname avahi-daemon[2583]: New relevant interface enp1234.IPv4 for mDNS.
Mär 18 01:35:51 hostname avahi-daemon[2583]: Network interface enumeration completed.
Mär 18 01:35:51 hostname avahi-daemon[2583]: Registering new address record for myip on enp1234.IPv4.
Mär 18 01:35:51 hostname avahi-daemon[2583]: Registering HINFO record with values 'X86_64'/'LINUX'.
Mär 18 01:35:52 hostname avahi-daemon[2583]: Server startup complete. Host name is hostname.local. Local service cookie is 123.
Mär 18 01:35:53 hostname avahi-daemon[2583]: Service "hostname" (/services/ssh.service) successfully established.
Mär 18 01:35:53 hostname avahi-daemon[2583]: Service "hostname" (/services/sftp-ssh.service) successfully established.

Thanks for your answer.
snakeroot wrote:Are you sure it is actually starting ssh and ssftp or is it just having avahi advertise them as existing?
I'm not sure if anything is started, the term "Service ssh successfully established" sounds like the ssh serrver is started to me, but it might just be strange wording. What does "advertise as existing" mean?
From the snippet you quoted, it looks like the latter. Unless you have alread started socket activation for ssh or sftp, whether via systemd *.socket or inetd, I'm not sure it would actually be started.
I didn't enable anything manually.
I think you can rm/mv the sftp-ssh.service and ssh.service files /etc/avahi/services/ and prevent those services from being advertised.
OK thanks for the hint. Nontheless i would rather stop avahi from starting than configuring it.
Begin rant...
I'm a bit annoyed that avahi is starting without my permission. Seems like systemd is getting a bit overzealous with starting services. Interestingly this was one of the big problems with upstart, and was supposed to be solved with systemd. I still like systemd.

[SOLVED] Suddenly unable to mount samba share using cifs

I have a home server running ArchLinux, hosting an SMB share. My client box is also ArchLinux, both are up to date, running Linux-ck 3.9.2-2-ck. Prior to rebooting both machines around twenty minutes ago, the share mounted fine for months.
Here is the extent of the "verbosity" I receive from mount:
mount error(13): Permission denied
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)
Here is my fstab:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmpfs nodev,nosuid 0 0
# UUID=71066ae2-40ec-4125-9db7-d04b6a04f712
UUID=71066ae2-40ec-4125-9db7-d04b6a04f712 / ext4 rw,relatime,data=ordered 0 2
# UUID=172faa6a-9cca-4d9e-a0b9-a5da3ea81922
UUID=172faa6a-9cca-4d9e-a0b9-a5da3ea81922 /boot ext2 rw,relatime 0 2
# UUID=65023815-33fc-4ebd-b245-65683201fbcf
UUID=65023815-33fc-4ebd-b245-65683201fbcf /home ext4 rw,relatime,data=ordered 0 2
UUID=1a23d461-fa2b-4ea4-8e58-e7efba3f3bed /media/Storage ext3 rw 0 2
//ARRAY/Array /media/Array cifs credentials=/home/xaero/.smbpasswd,iocharset=utf8,uid=1000,gid=1000,nounix,sec=ntlm 0 0
I have tried any number of different options on that final line defining this share now:
I have tried //array/array (which is what it was originally) and //ARRAY/Array (which is case-sensitive) as well as any combination of using my credentials file (which used to work) or user=,pass= as well changing my credentials file to use quotation marks around my password as it has special characters. I've also read of using sec=ntlm fixing mount issues, but in my case it did not. I'm kind of scratching my head here as passing --verbose to mount yields zero additional information... the uid and gid entries were necessary in the past to mount this share, however I have tried both with and without them, to no avail.
I rely on SMB in lieu of sshfs as there isn't a stable sshfs implementation for Windows users, which there are some on my network; I also find for whatever reason SMB happens to be faster.
Last edited by Xaero252 (2013-05-19 21:45:30)

I'm not exactly sure what fixed this... I looked at the configuration file to make sure I hadn't missed it being updated, and it was in the new format; everything setup correctly (I remember having to edit it not long ago to fix something, probably for the update which you mentioned) I reverted my fstab back to the way it was before (making backups is good) and restarted the smbd on the server numerous times... at some point it just started working again. I wish I had a more concrete answer for documentation sake, but I was literally just rebooting/restarting services in desperation with little to no config hacking between and suddenly things clicked. I'm also no longer running the sec=ntlm option..
Thanks for reminding me to check my config though, when I updated I had forgotten to enable user restriction (guest was enabled, and certain directories weren't user-specific)

Mount samba share on boot

Hello,
I want to mount a samba share on boot.
I have put this in /etc/fstab
//linuxbak/mp3 /mnt/mp3 smbfs username=***,password=***,user 0 0
But the network daemon is started after /etc/fstab is executed.
And I was wondering if it possible to change this somewhere.
Or maybe an other idea to mount the samba share on boot time

maybe an automounter would help you? http://www.google.com/search?q=autofs&s … 8&oe=utf-8

Can not mount smb share on osx 10.4.6

I have a linux suse 10 machine and I would like to mount files that are on my osx 10.4.6 machine. The KDE gui to do this does not work at all so I went to the command line and it turns out that os x is not asking for the password until after the timeout. From the command line I can still get the job done but why is os x not asking for the password until after the timeout? Below is the relevant command sequence.In this case the password is no the command line, but it still waits for the timeout before connecting.
linux:/home/dave # smbclient //192.168.0.4/Dave -U Dave%mypassword
timeout connecting to 192.168.0.4:445
Domain=[GANDALF] OS=[Unix] Server=[Samba 3.0.10]
You can see the timeout message and then the successful connection. The same thing happens when I try to mount the smb file system.
Any thoughts? I think this is a bug

At home I am running Suse 9.3 and have no trouble connecting to my powerbook (10.4.6). I do use the KDE "explorer" program (Konqueror) and just type in (in the address bar):
smb://IPADDRESS/SHARENAME
It takes a few seconds but a windows pops up asking for user name and password. A few more seconds and I'm in.
Are both machines on a domain or a workgroup? I just have a 2 computer workgroup called "Home" (creative, I know). In the Yast control center in Suse I configured the Samba client to be blank in the "Membership" box. Maybe try changing that around (make it blank or if it is blank, enter the workgroup name).
If this doesn't help, you may want to try posting this question in a Linux forum, specifically Suse 10.0 if possible. There are definitely a lot of variations b/t distributions, even b/t different versions of the same distro.

Can not mount nfs shares

I have a centos server which tries to mount a nfs share from an osx server tiger.
on the osx server showmount -e shows me the mountpoint perfectly.
on the linux server i try to mount the mountpoint and after some time it gives me the error:
mount.nfs: Input/output error
does this sound familiar to anyone? please help me :P

more information:
nidump -r /exports .
"name" = ( "exports" );
CHILDREN = (
"clients" = ( "192.168.0.10" );
"name" = ( "/backup" );
"opts" = ( "" );
showmount -a returns:
Exports list on localhost:
/backup 192.168.0.10

Unable to mount SMB shares under Mac OS 10.6.5

Help -
*I can no longer mount any shares from my Seagate BlackArmor NAS-110*. I bought the device (a 1TB network drive with CIFS (aka SMB), NFS, and FTP capabilities (no AFP connectivity)) in June of 2010, and it was working fine until appx (18 Nov, 2010). My computer - MacPro 2x2.26GHz Quad-Core Intel Xeon (early 2009) with 12GB of 1066MHz DDR3 RAM and Mac OS 10.6.5. My home network is running on Apple's TimeCapsule router (version 7.4.2).
Note: Problems began after installation of recent updates:
11/10/2010 - Mac OS 10.6.5
11/12/2010 - iTunes 10.1
11/13/2010 - iLife '11
11/13/2010 - iPhoto 9.1
11/18/2010 - Safari 5.0.3
I'm not sure which, if any, of these updates may have intrudced new code which impacted my ability to mount SMB/CIFS shares, or whether this problem is isolated to the NAS-110 (actually, reading numerous posts about connectivity issues (during/over the last month or so) shows similar issues with other external drives, servers, NAS devices). The issues may not have materialized until I rebooted the NAS or the Mac. FYI: The only firewall I'm using is the Mac's built in firewall, and I've got File Sharing (AFP, SMB) set to Allow Incoming.
What happens? I can't mount the SMB shares. I can see the device in my finder. It shows up as "BA-22B9C2", and I can see the sharepoint folders (in Finder): Download, Public, and wiki. When I attempt to SMB mount the shares (by any of the following methods: Double-Click in Finder, use 'Go->Connect to Server' or using the 'BlackArmor Discovery' application) The share/folder icon does not appear on my desktop. It creates a mount-point in the /Volumes directory, but no folder appears on the desktop. I can 'cd' into the sharepoint, and I can see that Spotlight has attempted to index the sharepoint (a .Spotlight-V100 directory was created), but I cannot see the 'Our Music, Our Pictures, or Our Videos' folders inside the Public share/directory. Successive attempts to mount a share, using Finder results in additional mount points in the /Volumes directory (Public-1, Public-2, Public-3, etc), but no folder icons on my desktop.
FYI: The 'Connected servers' setting (under 'Shared') is enabled in my Finder's Prefences (along with Bonjour and Back to My Mac), so connected shares should appear on the desktop.
Attempts to mount shares using the Connect to Server method (smb://10.0.1.2/Public, smb://admin:[email protected]/Public) also fail. No folder appears on desktop. The password/login authenticates (connecting to server), and a mount point is created in the /Volumes directory, but no folder appears on the desktop.
Attempts to mount shares using the BlackArmor Discovery application generate similar results. Shares are visible in the tool. I click on the 'Public' share (which has permissions set to 'read, write, execute' for all), then click the 'Mount Share' button. I am presented with an authentication/login dialog. I log in as a Registered user (name: admin password: admin) Once again, a mount point is created in the /Volumes directory, but no folder appears on the desktop.
Notably, whenever I attempt to mount a share, Spotlight indexes the share, but then it dies on my computer. Spotlight stops indexing my primary drive (where the OS is installed for my Mac). I have to stop the mds process using Activity Monitor. mds restarts automatically, and it starts indexing my primary drive again. While this may not be critical to my troubleshooting efforts, it has caused some considerable consternation on my part.
I initially (back around the 18th of Nov, 2010) attempted troubleshooting with the assistance of Seagate technicians, but they quickly gave up on the email support, insisted I had to continue over the phone, which costs ~$14.00 per 'incident' and isn't convenient for my schedule.
I've already attempted to update the firmware on the NAS (from 1000.0361 to 1000.1081), but that won't work. The NAS indicates a firmware update (1000.1081) is available, but it reports: "Firmware is not found". I had a friend try this update using his Windows machine (and my NAS), with the same results. He tried with a a Vista box and a Windows-NT running through emulation. I also tried to manually update. I downloaded the firmware image file "sg1000-1000.1081.img" from the Seagate downloads page, and attempted a manual update on the NAS. That failed with error "Failed to upload new firmware image to system." Once again, my friend tried to perform a manual update to the NAS. He downloaded a new copy of the file (from the Seagate downloads page), and he got the same error.
The Seagate techs recommended that I update the firmware. I explained my problems updating the firmware, and I have asked the Seagate techs (via email) for a known good copy of the firmware update, but they do not answer my requests for such.
The Seagate techs recommended that I restore the NAS with a factory reset. That caused plenty of problems, as their is no mac software to recover the factory reset 'key' from the device (need device MAC, and I presume some sort of hashing key stored on the device). So, I had to cart the drive over to my friends house, and have him attempt the restore. After some initial confusion regarding the MAC address, we were able to successfully restore the device to it's factory settings.
Note: Before attempting the factory reset, my friend attempted to mount the SMB shares (on the NAS), using his Mac running 10.6.5. He encountered the same problems I encountered. When he tried using his Windows-NT (through VMFusionWare emulation) *he WAS able to mount the shares*. O.k. This must be a Mac OS issue, and not a Seagate NAS issue. - Now that the drive has been restored to factory defaults, it's pretty much empty (some folders, but no data). Default admin/admin username/password are in place.
I'm not sure which, if any of my most recent software updates may have introduced changes to smb/samba, so I tried mounting the device using other services. It's capable of FTP and NFS as well as CIFS/SMB.
I tried to create an NFS mount. I tried using two different methods (an application called NFS Manager and the 'Connect to Server' method built into the Mac. Both methods failed to establish a nfs mount to the server. No login errors were noted, but no mount points were created in /Volumes, and no folders appeared on the desktop.
I tried to connect via FTP, that didn't work either (using an my Transmit client). I'm certainly striking out with this drive. My Mac will not mount the shares/folders. I tried FTP (to 10.0.1.2 as admin) using Transmit application (on port 21). Transmit reported "Could not retrieve file listing for “/Public”. Server said: OOPS: Child died Error -162: Port failed". Connectivity protocols of CIFS, NFS and FTP (on port 21) are enabled on the NAS and the /Public share.
*When I attempt to connect using the Connect to Server method (See Apple's 'Go' menu in the Finder), I met with sucess!* ftp://10.0.1.2/Public connect attempt resulted in two pop ups. One of them said 'connecting', the other said something about "'NetAuthAgent' (I didn't write it down) wants permission to access your confidential keychain data" Presumably, this was the authentication request. I said 'Always allow'. A folder appeared on my desktop and a finder window opened showing the contents of that folder. Unfortunately, the share is 'read only'; even when I attempt to authenticate as a specific user.
Note: I don't think FTP attempts to index the mounted shares.
Prior to the factory reset, I was able to connect to the shares using the Seagate's 'Global Access' web based ftp service. Now I cannot connect through the Global Access page.
Below are 'Console' entries and a listing of my /Volumes directory. These may help resolve the issue. I deleted some entries (those I felt were unrelated to the issue). I left in stuff that's been bothering me.
_*Can anyone help me reestablish SMB connectivity with my NAS-110?*_
- Robert Vaessen
'Console: All messages'
12/16/10 00:11:15 BlackArmor Discovery[65267] Got netServiceBrowserWillSearch: event.
12/16/10 00:11:15 mDNSResponder[23] Bad service type in .blackarmor4dinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
12/16/10 00:11:15 mDNSResponder[23] Bad service type in .blackarmor4dinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
12/16/10 00:11:15 BlackArmor Discovery[65267] Got netServiceBrowserWillSearch: event.
12/16/10 00:11:15 mDNSResponder[23] Bad service type in .blackarmor2dinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
12/16/10 00:11:15 mDNSResponder[23] Bad service type in .blackarmor2dinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
12/16/10 00:11:15 BlackArmor Discovery[65267] Got netServiceBrowserWillSearch: event.
12/16/10 00:11:16 mDNSResponder[23] Bad service type in .blackarmor1dinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
12/16/10 00:11:16 mDNSResponder[23] Bad service type in .blackarmor1dinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
12/16/10 00:11:16 BlackArmor Discovery[65267] Got netServiceBrowserWillSearch: event.
12/16/10 00:11:16 mDNSResponder[23] Bad service type in .blackarmorNASinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
12/16/10 00:11:16 mDNSResponder[23] Bad service type in .blackarmorNASinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
12/16/10 00:11:16 BlackArmor Discovery[65267] Got netServiceBrowserWillSearch: event.
12/16/10 00:11:16 BlackArmor Discovery[65267] got netServiceBrowser:didFindService:moreComing: event for <NSNetService 0x517a80> local. blackarmor1dinfo.udp. BA-22B9C2
12/16/10 00:11:16 BlackArmor Discovery[65267] inserted new net service object for BA-22B9C2:
"BA-22B9C2" = 1;
12/16/10 00:11:16 mDNSResponder[23] Bad service type in BA-22B9C2.blackarmor1dinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
12/16/10 00:11:16 BlackArmor Discovery[65267] Added 1 drive table objects to the servicesToInsertArray.
12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Domain=[BA-22B9C2] OS=[Unix] Server=[Samba 3.0.34]
12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Domain=[BA-22B9C2] OS=[Unix] Server=[Samba 3.0.34]
12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] tree connect failed: NTSTATUS_ACCESSDENIED
12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Domain=[BA-22B9C2] OS=[Unix] Server=[Samba 3.0.34]
12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] tree connect failed: NTSTATUS_ACCESSDENIED
12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Domain=[BA-22B9C2] OS=[Unix] Server=[Samba 3.0.34]
12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] tree connect failed: NTSTATUS_ACCESSDENIED
12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Domain=[BA-22B9C2] OS=[Unix] Server=[Samba 3.0.34]
12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] tree connect failed: NTSTATUS_ACCESSDENIED
12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] PING 10.0.1.2 (10.0.1.2)
12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=0
12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=0 ttl=64 time=0.307 ms
12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=1
12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=1 ttl=64 time=0.216 ms
12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=2
12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=2 ttl=64 time=0.216 ms
12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=3
12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=3 ttl=64 time=0.286 ms
12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] --- 10.0.1.2 ping statistics ---
12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] 4 packets transmitted, 4 packets received, 0% packet loss
12/16/10 00:11:34 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Download', from '//%20;[email protected]/Download', dead
12/16/10 00:11:34 mds[22627] (Error) DiskStore: Unable to create/find index location
12/16/10 00:23:50 sandboxd[65414] awacsd(48) deny file-read-metadata /Library/Preferences/com.apple.security.plist
12/16/10 00:23:50 sandboxd[65414] awacsd(48) deny file-read-data /Library/Preferences/com.apple.security.plist
12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] PING 10.0.1.2 (10.0.1.2)
12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=0
12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=0 ttl=64 time=0.356 ms
12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=1
12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=1 ttl=64 time=0.209 ms
12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=2
12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=2 ttl=64 time=0.237 ms
12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=3
12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=3 ttl=64 time=0.209 ms
12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] --- 10.0.1.2 ping statistics ---
12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] 4 packets transmitted, 4 packets received, 0% packet loss
12/16/10 00:31:39 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public', from '//%20;%[email protected]/Public', dead
12/16/10 00:31:39 mds[22627] (Error) DiskStore: Unable to create/find index location
12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] PING 10.0.1.2 (10.0.1.2)
12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=0
12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=0 ttl=64 time=0.271 ms
12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=1
12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=1 ttl=64 time=0.257 ms
12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=2
12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=2 ttl=64 time=0.197 ms
12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=3
12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=3 ttl=64 time=0.205 ms
12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] --- 10.0.1.2 ping statistics ---
12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] 4 packets transmitted, 4 packets received, 0% packet loss
12/16/10 00:48:41 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public', from '//%20;%[email protected]/Public', dead
12/16/10 00:48:41 mds[22627] (Error) DiskStore: Unable to create/find index location
12/16/10 00:51:17 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public', from '//[email protected]/Public', dead
12/16/10 00:51:18 mds[22627] (Error) DiskStore: Unable to create/find index location
12/16/10 00:53:51 sandboxd[65922] awacsd(48) deny file-read-metadata /Library/Preferences/com.apple.security.plist
12/16/10 00:53:51 sandboxd[65922] awacsd(48) deny file-read-data /Library/Preferences/com.apple.security.plist
12/16/10 00:54:24 cupsd[65930] sandbox cache error: database is locked
12/16/10 01:00:56 com.apple.launchd.peruser.505[150] (com.apple.pbs) Throttling respawn: Will start in 10 seconds
12/16/10 01:01:06 com.apple.launchd.peruser.505[150] (com.apple.pbs) Throttling respawn: Will start in 10 seconds
12/16/10 01:02:02 _lp[66035] audit warning: expired /var/audit/20101215210444.20101215231614
12/16/10 01:02:02 _lp[66034] audit warning: closefile /var/audit/20101216055051.20101216080202
12/16/10 01:09:56 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public', from '//[email protected]/Public', dead
12/16/10 01:09:56 mds[22627] (Error) DiskStore: Unable to create/find index location
12/16/10 01:10:15 com.apple.Finder[208] NFS Portmap: RPC: Program not registered
12/16/10 01:11:15 com.apple.Finder[208] NFS Portmap: RPC: Program not registered
12/16/10 01:11:15 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:12:09 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:12:13 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:12:29 com.apple.Finder[208] mount_nfs: can't access /: Permission denied
12/16/10 01:12:44 com.apple.Finder[208] mount_nfs: can't access /: Permission denied
12/16/10 01:15:05 /System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer[66174 ] No valid tickets, timing out
12/16/10 01:15:53 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:15:54 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:15:55 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:15:55 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:15:56 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:17:05 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:19:13 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public-1', from '//[email protected]/Public', dead
12/16/10 01:22:38 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public-2', from '//[email protected]/Public', dead
12/16/10 01:23:21 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:23:25 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:23:25 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:23:26 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:23:27 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:23:27 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:23:50 sandboxd[66426] awacsd(48) deny file-read-metadata /Library/Preferences/com.apple.security.plist
12/16/10 01:23:50 sandboxd[66426] awacsd(48) deny file-read-data /Library/Preferences/com.apple.security.plist
12/16/10 01:24:03 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:47:13 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public-3', from '//[email protected]/Public', dead
12/16/10 01:47:13 mds[22627] (Normal) DiskStore: Creating index for /Volumes/Public-3
12/16/10 01:50:38 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:51:45 com.apple.launchd.peruser.505[150] (com.apple.pbs) Throttling respawn: Will start in 10 seconds
12/16/10 01:51:56 com.apple.launchd.peruser.505[150] (com.apple.pbs) Throttling respawn: Will start in 10 seconds
12/16/10 01:52:03 authexec[67020] executing /usr/sbin/automount
12/16/10 01:52:39 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:52:47 com.apple.launchd.peruser.505[150] (com.apple.AddressBook.abd) The following job tried to hijack the service "com.apple.AddressBook.abd" from this job: [0x0-0x1284283].com.apple.AddressBook.abd
12/16/10 01:53:10 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:53:50 sandboxd[67042] awacsd(48) deny file-read-metadata /Library/Preferences/com.apple.security.plist
12/16/10 01:53:50 sandboxd[67042] awacsd(48) deny file-read-data /Library/Preferences/com.apple.security.plist
12/16/10 02:00:50 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 02:00:55 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 02:01:01 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public-4', from '//[email protected]/Public', dead
12/16/10 02:11:28 GrowlHelperApp[328] Transmit registered
12/16/10 02:12:07 Firewall[101] Transmit is listening from 10.0.1.3:59918 proto=6
12/16/10 02:12:17 Firewall[101] Transmit is listening from 10.0.1.3:59929 proto=6
12/16/10 02:12:17 Firewall[101] Transmit is listening from 10.0.1.3:59930 proto=6
12/16/10 02:12:25 Firewall[101] Transmit is listening from 10.0.1.3:59937 proto=6
12/16/10 02:12:25 Firewall[101] Transmit is listening from 10.0.1.3:59938 proto=6
12/16/10 02:12:33 servernotifyd[402] token expired
12/16/10 02:12:35 Firewall[101] Transmit is listening from 10.0.1.3:59947 proto=6
12/16/10 02:12:35 Firewall[101] Transmit is listening from 10.0.1.3:59948 proto=6
12/16/10 02:12:45 Firewall[101] Transmit is listening from 10.0.1.3:59961 proto=6
12/16/10 02:12:48 servernotifyd[402] Fetching new token
12/16/10 02:12:48 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public-5', from '//[email protected]/Public', dead
12/16/10 02:12:49 servernotifyd[402] Completed token request
12/16/10 02:12:49 servernotifyd[402] Subscription request completed
12/16/10 02:15:20 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public-6', from '//[email protected]/Public', dead
12/16/10 02:15:20 mds[22627] (Normal) DiskStore: Creating index for /Volumes/Public-6
12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] PING 10.0.1.2 (10.0.1.2)
12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=0
12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=0 ttl=64 time=0.347 ms
12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=1
12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=1 ttl=64 time=0.264 ms
12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=2
12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=2 ttl=64 time=0.232 ms
12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=3
12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=3 ttl=64 time=0.236 ms
12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] --- 10.0.1.2 ping statistics ---
12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] 4 packets transmitted, 4 packets received, 0% packet loss
12/16/10 02:20:39 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public-7', from '//%20;%[email protected]/Public', dead
12/16/10 03:07:28 Firewall[101] Transmit is listening from 10.0.1.3:60607 proto=6
12/16/10 03:07:37 Firewall[101] Transmit is listening from 10.0.1.3:60611 proto=6
12/16/10 03:07:37 Firewall[101] Transmit is listening from 10.0.1.3:60612 proto=6
12/16/10 03:07:46 Firewall[101] Transmit is listening from 10.0.1.3:60614 proto=6
12/16/10 03:07:46 Firewall[101] Transmit is listening from 10.0.1.3:60615 proto=6
12/16/10 03:07:55 Firewall[101] Transmit is listening from 10.0.1.3:60619 proto=6
12/16/10 03:07:55 Firewall[101] Transmit is listening from 10.0.1.3:60620 proto=6
12/16/10 03:08:04 Firewall[101] Transmit is listening from 10.0.1.3:60622 proto=6
12/16/10 03:11:26 Firewall[101] Transmit is listening from 10.0.1.3:60649 proto=6
12/16/10 03:11:35 Firewall[101] Transmit is listening from 10.0.1.3:60651 proto=6
12/16/10 03:11:35 Firewall[101] Transmit is listening from 10.0.1.3:60652 proto=6
12/16/10 03:11:45 Firewall[101] Transmit is listening from 10.0.1.3:60654 proto=6
12/16/10 03:11:45 Firewall[101] Transmit is listening from 10.0.1.3:60655 proto=6
12/16/10 03:11:53 Firewall[101] Transmit is listening from 10.0.1.3:60661 proto=6
12/16/10 03:11:53 Firewall[101] Transmit is listening from 10.0.1.3:60662 proto=6
12/16/10 03:12:02 Firewall[101] Transmit is listening from 10.0.1.3:60667 proto=6
12/16/10 03:12:02 sysadmin[69677] audit warning: expired /var/audit/20101215231614.20101216012742
12/16/10 03:12:02 sysadmin[69675] audit warning: closefile /var/audit/20101216080202.20101216101202
12/16/10 03:18:40 com.apple.launchd.peruser.505[150] (com.apple.pbs) Throttling respawn: Will start in 10 seconds
12/16/10 03:18:48 Firewall[101] ftpfs_agent is listening from 10.0.1.3:60739 proto=6
12/16/10 03:18:48 Firewall[101] Allow ftpfs_agent connecting from 10.0.1.2:43968 to port 60739 proto=6
12/16/10 03:18:48 com.apple.launchd.peruser.505[150] (com.apple.pbs) Throttling respawn: Will start in 2 seconds
12/16/10 03:18:48 com.apple.launchd.peruser.505[150] (com.apple.pbs) Throttling respawn: Will start in 2 seconds
12/16/10 03:18:48 Firewall[101] ftpfs_agent is listening from 10.0.1.3:60741 proto=6
12/16/10 03:18:48 Firewall[101] Allow ftpfs_agent connecting from 10.0.1.2:34565 to port 60741 proto=6
12/16/10 03:19:05 Firewall[101] ftpfs_agent is listening from 10.0.1.3:60745 proto=6
12/16/10 03:19:05 Firewall[101] Allow ftpfs_agent connecting from 10.0.1.2:36662 to port 60745 proto=6
12/16/10 03:21:59 Firewall[101] ftpfs_agent is listening from 10.0.1.3:60785 proto=6
12/16/10 03:21:59 Firewall[101] Allow ftpfs_agent connecting from 10.0.1.2:49839 to port 60785 proto=6
12/16/10 03:21:59 Firewall[101] ftpfs_agent is listening from 10.0.1.3:60787 proto=6
12/16/10 03:21:59 Firewall[101] Allow ftpfs_agent connecting from 10.0.1.2:47180 to port 60787 proto=6
12/16/10 03:23:51 sandboxd[70960] awacsd(48) deny file-read-metadata /Library/Preferences/com.apple.security.plist
12/16/10 03:23:51 sandboxd[70960] awacsd(48) deny file-read-data /Library/Preferences/com.apple.security.plist
'Cosole: samba log.nmbd' (Same entry repeated numerous times)
[2010/12/16 04:22:10, 1, pid=118] /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbdincomingdgrams.c:process_resetbrowser(735)
processresetbrowser: received diagnostic browser reset request from BA-22B9C2<00> IP 10.0.1.2 state=0x2
'Console: samba log.sndb' (note the dates)
[2010/11/11 18:33:43, 0] /SourceCache/samba/samba-235.4/samba/source/smbd/server.c:main(925)
smbd version 3.0.28a-apple started.
Copyright Andrew Tridgell and the Samba Team 1992-2008
[2010/11/11 18:33:43, 0, pid=90063] /SourceCache/samba/samba-235.4/samba/source/lib/opendirectory.c:opendirectoryfill_domain_sidcache(1985)
opendirectorysamsearchname[/Config/CIFSServer] gave -14136 [eDSRecordNotFound]
[2010/11/11 18:33:43, 0, pid=90063] /SourceCache/samba/samba-235.4/samba/source/passdb/secrets.c:secretsfetch_domainsid(150)
secretsfetch_domain_sid:opendirectory_query_domainsid gave -14136 [eDSRecordNotFound]
[2010/11/24 04:11:15, 0] /SourceCache/samba/samba-235.5/samba/source/smbd/server.c:main(925)
smbd version 3.0.28a-apple started.
Copyright Andrew Tridgell and the Samba Team 1992-2008
[2010/11/24 04:11:15, 0, pid=1507] /SourceCache/samba/samba-235.5/samba/source/lib/opendirectory.c:opendirectoryfill_domain_sidcache(1985)
opendirectorysamsearchname[/Config/CIFSServer] gave -14136 [eDSRecordNotFound]
[2010/11/24 04:11:15, 0, pid=1507] /SourceCache/samba/samba-235.5/samba/source/passdb/secrets.c:secretsfetch_domainsid(150)
secretsfetch_domain_sid:opendirectory_query_domainsid gave -14136 [eDSRecordNotFound]
[2010/11/24 10:47:01, 0] /SourceCache/samba/samba-235.5/samba/source/smbd/server.c:main(925)
smbd version 3.0.28a-apple started.
Copyright Andrew Tridgell and the Samba Team 1992-2008
[2010/11/24 10:47:02, 0, pid=1339] /SourceCache/samba/samba-235.5/samba/source/lib/opendirectory.c:opendirectoryfill_domain_sidcache(1985)
opendirectorysamsearchname[/Config/CIFSServer] gave -14136 [eDSRecordNotFound]
[2010/11/24 10:47:02, 0, pid=1339] /SourceCache/samba/samba-235.5/samba/source/passdb/secrets.c:secretsfetch_domainsid(150)
secretsfetch_domain_sid:opendirectory_query_domainsid gave -14136 [eDSRecordNotFound]
[2010/11/29 10:48:44, 0] /SourceCache/samba/samba-235.5/samba/source/smbd/server.c:main(925)
smbd version 3.0.28a-apple started.
Copyright Andrew Tridgell and the Samba Team 1992-2008
[2010/11/29 10:48:44, 0, pid=43299] /SourceCache/samba/samba-235.5/samba/source/lib/opendirectory.c:opendirectoryfill_domain_sidcache(1985)
opendirectorysamsearchname[/Config/CIFSServer] gave -14136 [eDSRecordNotFound]
[2010/11/29 10:48:44, 0, pid=43299] /SourceCache/samba/samba-235.5/samba/source/passdb/secrets.c:secretsfetch_domainsid(150)
secretsfetch_domain_sid:opendirectory_query_domainsid gave -14136 [eDSRecordNotFound]
[2010/12/08 12:29:58, 0] /SourceCache/samba/samba-235.5/samba/source/smbd/server.c:main(925)
smbd version 3.0.28a-apple started.
Copyright Andrew Tridgell and the Samba Team 1992-2008
[2010/12/08 12:29:58, 0, pid=7246] /SourceCache/samba/samba-235.5/samba/source/lib/opendirectory.c:opendirectoryfill_domain_sidcache(1985)
opendirectorysamsearchname[/Config/CIFSServer] gave -14136 [eDSRecordNotFound]
[2010/12/08 12:29:58, 0, pid=7246] /SourceCache/samba/samba-235.5/samba/source/passdb/secrets.c:secretsfetch_domainsid(150)
secretsfetch_domain_sid:opendirectory_query_domainsid gave -14136 [eDSRecordNotFound]
[2010/12/08 12:30:04, 0, pid=7248] /SourceCache/samba/samba-235.5/samba/source/passdb/pdbodsam.c:odssamgetsampwnam(1576)
opendirectorysamsearchname gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Users record for account 'admin'
[2010/12/08 12:30:04, 0, pid=7248] /SourceCache/samba/samba-235.5/samba/source/passdb/pdbodsam.c:odssamgetsampwnam(1576)
opendirectorysamsearchname gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Users record for account 'admin'
[2010/12/08 12:30:06, 0, pid=7252] /SourceCache/samba/samba-235.5/samba/source/passdb/pdbodsam.c:odssamgetsampwnam(1576)
opendirectorysamsearchname gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Users record for account 'admin'
[2010/12/08 12:30:06, 0, pid=7252] /SourceCache/samba/samba-235.5/samba/source/passdb/pdbodsam.c:odssamgetsampwnam(1576)
opendirectorysamsearchname gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Users record for account 'admin'
[2010/12/09 09:59:02, 0] /SourceCache/samba/samba-235.5/samba/source/smbd/server.c:main(925)
smbd version 3.0.28a-apple started.
Copyright Andrew Tridgell and the Samba Team 1992-2008
[2010/12/09 09:59:03, 0, pid=19816] /SourceCache/samba/samba-235.5/samba/source/lib/opendirectory.c:opendirectoryfill_domain_sidcache(1985)
opendirectorysamsearchname[/Config/CIFSServer] gave -14136 [eDSRecordNotFound]
[2010/12/09 09:59:03, 0, pid=19816] /SourceCache/samba/samba-235.5/samba/source/passdb/secrets.c:secretsfetch_domainsid(150)
secretsfetch_domain_sid:opendirectory_query_domainsid gave -14136 [eDSRecordNotFound]
'Listing of the /Volumes directory'
drwxrwxrwt@ 20 root admin 680 Dec 16 03:29 .
drwxrwxr-x 44 root admin 1564 Nov 27 12:19 ..
drwxrwxr-x 44 root admin 1564 Nov 27 12:19 Clone
lrwxr-xr-x 1 root admin 1 Dec 8 04:35 Macintosh HD -> /
drwx------ 1 rvaessen rvaessen 16384 Jan 1 1980 NO NAME
dr-xr-xr-x 2 root rvaessen 1 Dec 16 01:15 Public
drwxr-xr-x+ 3 rvaessen admin 102 Dec 16 01:19 Public-1
dr-xr-xr-x 1 rvaessen rvaessen 512 Dec 16 03:30 Public-10
drwxr-xr-x+ 3 rvaessen admin 102 Dec 16 01:22 Public-2
drwxr-xr-x+ 3 rvaessen admin 102 Dec 16 01:47 Public-3
drwxr-xr-x+ 3 rvaessen admin 102 Dec 16 02:01 Public-4
drwxr-xr-x+ 3 rvaessen admin 102 Dec 16 02:12 Public-5
drwxr-xr-x+ 3 rvaessen admin 102 Dec 16 02:15 Public-6
drwxr-xr-x+ 3 rvaessen admin 102 Dec 16 02:20 Public-7
dr-xr-xr-x 1 rvaessen rvaessen 512 Dec 16 03:30 Public-8
dr-xr-xr-x 1 rvaessen rvaessen 512 Dec 16 03:30 Public-9
drwxr-xr-x@ 17 rvaessen rvaessen 646 Nov 11 18:12 Robert Vaessen’s iPod
drwxrwxr-x 15 sysadmin staff 578 Nov 6 2009 Time Machine Prime
drwxrwxrwx 1 rvaessen rvaessen 4096 Dec 7 17:31 nuvi
drwx------ 1 rvaessen rvaessen 2048 Aug 16 14:52 rvaessen

O.k. Thanks for the clarification. I poked around in my TimeCapsule router's settings (TimeCapsule is an Apple Airport Extreme router with attached hard drive for wireless backup/storage). Unfortunately, it doesn't look like I can disable multicasting with the TimeCapsule. I can change the multicasting 'rate'. Settings are Low, Medium, High. It's currently set to Low.
I did a few web searches, and found an Apple.com article: <http://support.apple.com/kb/HT3789?viewlocale=en_US> which explained how to disable Bonjour Service Advertisements. I believe this is the same thing as 'Multicasting'. The process is a modification of "/System/Library/LaunchDaemons/com.apple.mDNSResponder.plist", and a restart of the Mac is required afterwards.
I'm a bit concerned that disabling multicasting will interfere with my AppleTVs and iTunes music sharing, but I may try it next time I'm up for a computer workout. This task will require editing of system preference files, could require multiple restarts, might interfere with my AppleTVs, could interfere with my iTunes file sharing, doesn't have a documented relationship to my problem.
This is way to difficult for something that should just work. Did you say you had read something about a relationship between this bonjour multicasting and smb connectivity? If it was online could you post the link?
I'm currently able to connect to the drive using NFS, but I have to manually configure that connection each time I reboot (can't get the 'Disk Utility' configured to do it automatically). While it's working with NFS, it's not my preferred connect method (for various reasons).

User unable to umount samba share

Here is the lines in my /etc/fstab related to samba shares.
# Some Windows/SAMBA shares
//BAO-QNAP500GB/USB\040Disk\0401 /mnt/eBooks smbfs workgroup=BAO-HOME,username=xxxxxx,ip=192.168.2.4,password=xxxxxx,noauto,noatime,user,rw 0 0
I am able to mount samba share as a user (not root) after
chmod u+s /usr/bin/smbmnt
chmod u+s /usr/bin/smbumount
by
mount /mnt/eBooks
However, I am unable to umount as a user:
[ning@HP-m8100y ~]$ umount /mnt/eBooks
umount: /mnt/eBooks mount disagrees with the fstab
On the other hand, this could work:
smbumount /mnt/eBooks
Can somone tell me what I did wrong?

Looks like its something to do with fstab though I don't know what never having mounted shares though fstab myself. I would try removing the fstab entry and just using smbmount to mount shares, thats the way I've always done it and never have problems with mounting/unmounting.
smbmount //IP Address/source folder /destination folder

Can't connect to samba share via VPN

Hello all,
I am looking for an answer for few days now and still can't manage to fix it. I found two workarounds in the meantime, but it's not what I want!
My case:
Cisco vpn on one side and Mac vpn client (native). I can connect alright, can't only mount samba share. Via console I got invalid argument error, but when I go to finder > go to server it's just processing (no error). Left it for few mintes and nothing happened. I have a windows on virtual machine and I can mount samba alright. One more thing. I created a new user, logged in and it works! ****.
Can anyone say where should I look? What can be the problem on my old account? Don't want to switch and change all the things now, there must be a way to fix it...
Hope someone can help
Thanks in advance,
Regards,
Jake

Hi Richard,
Thanks for interest. It's a windows share 2003 smb. It's a company network. As I said its not the case of VPN itself.
About the new user, that's a yes, it's same username as my samba share name, but even tho it's the same it needs my authentication. For the more, when I am with my mac at work and connect via cable I can access everything alright from my old account.
How can VPN block me when I can access it from my windows virtual (which is not the same as my work username). I can access it from new user, I would say its not the case of VPN blocking me there, I guess it's something I have changed over the years with my previous VPN settings.
I have direct access to VPN and I know firewall is off right now as we are testing it, so its for sure my mac settings...
Question is where do I find it:)

After update to 10.6.3 copy to a Samba share fails

I have just upgraded to 10.6.3. Since then whenever I copy a file from my iMac to a Samba share on a Linux server I get the error:
The operation can't be completed because you don't have permission to access some of the items.
No changes were made on the server before this update.
If I create a file using any program or create/delete a folder on the share works fine, but I cannot copy files. The error occurs at the end of the copy, not a the beginning....
Anyone has had this problem? My best guess is something is not right with this latest patch.

Hi,
I have noticed the error occurs when I copy files from my Mac to any samba server (I run OpenSuSE on a Phenom-X4 and Ubuntu PPC on an old iBook-G3). However when I copy to a file share on a PC running Windows Server 2003 I do not get any file copy problems.
Reading and executing files from mounted samba shares or windows shares did not seem to have any issues.
For the moment I have relegated myself to copying files to a Windows OS running on a virtual machine in my Phenom-X4 and then logging into the VM and copying the files a second time to the samba share but I would appreciate anyone posting further on this issue. Because of my experiences I believe the issue is an incompatibility with the Samba servers after upgrading to 10.6.3.

How to allow users to mount a Samba shares on a WXP

Through lots of reading I've managed to get an understanding of how to mount SMB shares at bootup by placing the proper edits in /etc/fstab. While having the shares of the server, running Contribs.org SME Server 6.01 (recently known as Mitel SME Server) and acting as a samba server, being mounted at startup is perfect since the server is always on. This is not the best idea for the XP workstation since it isn't always on. Here is a copy of my present fstab file with x's replacing the passwords.
fstab [B---] 0 L:[ 1+19 20/ 21] *(1085/1086b)= . 10 0x0A
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /proc proc defaults 0 0
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
tmpfs /tmp tmpfs defaults 0 0
sysfs /sys sysfs defaults 0 0
usbdevfs /proc/bus/usb usbdevfs defaults 0 0
/dev/cdroms/cdrom0 /mnt/cd iso9660 ro,user,noauto,unhide 0 0
/dev/cdroms/cdrom0 /mnt/dvd udf ro,user,noauto,unhide 0 0
/dev/floppy/0 /mnt/fl vfat user,noauto,unhide 0 0
//192.168.2.2/stuff /mnt/silicon2 smbfs username=kingnubian,password=xxxxxxx,user
//192.168.2.105/e-smith /mnt/silicon1 smbfs username=kingnubian,password=xxxxxxx,users,noauto
/dev/discs/disc0/part5 swap swap defaults 0 0
/dev/discs/disc0/part1 / xfs defaults 0 1
I would like users with an account on the Linux box to mount the remote share on the XP box without needing to SU and consequently need the root password. When trying now to mount "e-smith" (The share on the XP box) as a user using "mount /mnt/silicon1" I get a message about needing to be SU.

To allow users to mount smb shares you need to make smbmnt suid:
# chmod +s /usr/bin/smbmnt
Note however that the user needs to own the directory used as mountpoint. So I don't know how to make 'mount /mnt/silicon1' in your setup work for all users.
For the users to be able to unmount the smb shares as well you need:
# chmod +s /usr/bin/smbumount
Now users can do 'smbmount //server/share mountpoint -o username=whatever' or simply 'mount mountpoint' if the details are specified in fstab. To unmount root can do 'umount mountpoint' or users can do 'smbumount mountpoint'.
Don't confuse smbmount with smbmnt - the first is the command you use to mount shares manually, the second is the one that should be suid and is used both by smbmount and by mount -t smb.
Hope this helps.
-bogomipz

AutoFS + Samba share problems when share not online (especially in itunes)

I'm trying to look into having some or all of my media on a server for a couple of my macs, the main one of interest right now being a mac mini working as a HTPC under a tv, being operated 99% of the time with just the apple remote and frontrow.
A friend informed me that if you have your itunes library not managed and add files from a remote share then everything works pretty well. Namely if you try to play a file it will seemingly automount the remote file and start it playing. If the remote server is not available it will quickly discover this and after a short pause start giving explanation marks next to the broken tracks. Get the remote destination connected and then try to play a broken track and it will successfully mount the track and play.
Basically perfect.
I quickly tried accessing these files via a symbolic link or alias to them on the remote drive, in doing this i can be somewhat insulated from problems of trying to move the library to other machines/shares in the future. This all works fine but you do lose the ability for itunes to automatically mount the remote drive, which is a bit of a step back, but not a big deal on my normal machine. On my HTPC machine however i'd really like front row to be able to just work, hence automatically mounting the server as required.
The only problem was that when i tried with files directly added to the itunes library from a remote location frontrow would NOT automount the tracks/videos when you attempted to play them like itunes would do.
I've just spent the last few hours following the advice here
http://rajeev.name/blog/2007/11/22/autofs-goodness-in-apples-leopard-105-part-i/
to setup autofs in the hope that this would let me get auto mounting working as it does with itunes and directly added to the library remote files.
I boiled this down to the following settings
as root
vi /etc/auto_master
and add
/smb auto_smb
then create this new config file
vi /etc/auto_smb
and add
<Mount dir under /smb folder> -fstype=smbfs ://<share user>:<share pass>@<ip address>/<share point>
ie.
testMount -fstype=smbfs ://netuser:[email protected]/remoteMount
finally tell automount to throw away its cache
automount -vc
then the mount should be setup
df -h
shows the indirect map waiting
map auto_smb 0Bi 0Bi 0Bi 100% /smb
and by triggering it
ls /smb/testMount
you should connect and get a listing, a subsequent df shows
df -h
//[email protected]/Media 466Gi 325Gi 141Gi 70% /smb/Media
Everything worked well with the share getting mounted nicely when present, frontrow could just start playing the files it needed, perfect!!
The problem came when i wanted to simulate the media server being offline, basically frontrow, a lot of the system including finder, cd commands attempting to access the share, and itunes if you tried that would all freeze for long periods of time as they tried their best to get the files they were looking for.
I tried looking into getting this to gracefully time out and think i got somewhere by trying to setup the samba share to be soft linked.. I wasn't sure in what files i could add this to, first attempts didn't seem to do anything but adding this seemed to make a difference
/etc/nsmb.conf
containing something like
#Configuration file for example.com
[default]
minauth=ntlmv2
streams=yes
soft=yes
to turn soft samba shares on. Things like cd in a terminal seemed to behave quite well with this, when no remote share present you would get empty folders and the like. Finder would also seem to be reasonable with it.
Frustratingly itunes and frontrow both still have quite massive pauses even when finder and cds in the background show that perhaps the soft links are working and failing like they should.
I'm now left wondering what i can do to fix it, and resorting to perhaps having the files added via a symbolic link, using the login items to launch the remote share every boot and then having it so that all i need to do is reboot the HTPC mac mini if the server is on for it to pick it up and let me play the files. Otherwise they'll just be unavailable and will fail gracefully without locking up itunes. The perfect solution would be to either have a crontab running, or some applescript bound somehow to whenever frontrow is ran which manually tries to tell finder to do the equivelant mount the login items setup does.
It's frustrating though as its so close, and the autofs solution if it did work better would seem to be the perfect solution. Has anyone dabbled with this and got any suggestions as to options you can setup to make things not go horribly wrong when a remote share is NOT present, preferrably within the context of itunes or front row not complaining, but to be honest any suggestions i'll be able to try out myself.
Sorry i've written so much, perhaps some of it will be helpful reference as it took me a while to decipher that link at the top into just setting up a samba autofs.
Cheers.

It seems like it's not only the ArchLinux workstation that displays the norwegian letters wrong. The only machine that shows this correc is the machine that created the file/catalogue.
It seems like the windows 2000 displays the cataloge created by windows XP just fine.

[SOLVED] advanced shell script for mount and unmount samba share

Good morning guys,
Today I've a very long question....
Hope in your help....:
I usually move from different network.
For one of those I need to mount some share that are under an ActiveDirectory server.
To do that I use samba.
Especially I've made and use the below shell script.
I know that it's so stupid but I'm a very newbie:
#!/bin/sh
echo "This is a custom script for mount my citrix share"
echo "Please insert user password (must a sudoer user)"
echo " "
sudo mount -t cifs -o username='myusername',password='mypassword' //host_ip/TsHome$/myusername /home/myuser/samba_share/TsHOME
sudo mount -t cifs -o username='myusername',password='mypassword' "//host_ip/direction" /home/myuser/samba_share/direction
echo " "
read -p "Press ENTER key to close this terminal"
exit
As I say the script work but it's so crude...!
I want/need to implement it whit the follow addictions:
1. print a feedback on mount: somenthing like "TsHOME is now mounted" or "unable to mount TsHOME"
2. check if the share are already mounted: to prevent accidentally multiple mount. If a share is already mounted I want to print something like "TsHOME is already mounted on /home/myuser/samba_share/TsHOME"
3. ask for share password (now it's in clear on script) - This is optinal
4. un-mount the share before reboot or shutdown command. That because I've notice that If i reboot or shutdown without manually un-mount the share the step of unmounting network file system became very slow
If it's no extremely difficult, can someone help me to write this script?
I know that man exist but I'm not a programmer and it's so difficult for me approch it.
Thank you in advance.
Ale
Last edited by Alexbit (2010-09-23 21:29:13)

Thank you very (VERY) much!
I've follow your information and.. it work!
If can be usefull to other this is the complete script:
#!/bin/sh
echo "This is a custom script for mount citrix share"
echo "****************************************"
echo " "
echo "Please insert domain password:"
read -s mypassword
echo " "
echo "|checking mount state...in share are not mounted mount it!|"
echo "+-------------------------------------------------------------------------+"
if grep "TsHome" /etc/mtab &>/dev/null; then
grep "TsHome" /etc/mtab | awk '{print "TsHome is already mounted on " $2}'
else
sudo mount -t cifs -o username='yourusername',password="$mypassword" //ipaddress/TsHome$ /home/Samba_share/TsHOME && echo "TsHOME is now mounted" || echo "unable to mount TsHOME"
fi
echo " "
if grep "direction" /etc/mtab &>/dev/null; then
grep "direction" /etc/mtab | awk '{print "direction is already mounted on " $2}'
else
sudo mount -t cifs -o username='yourusername',password="$mypassword" '//ipaddress/direction' /home/Samba_share/direction' && echo "direction pat is now mounted" || echo "unable to mount direction"
fi
echo " "
if grep "Area" /etc/mtab &>/dev/null; then
grep "Area" /etc/mtab | awk '{print "Area is already mounted on " $2}'
else
sudo mount -t cifs -o username='yourusername',password="$mypassword" '//ipaddress/Area' /home/Samba_share/Area && echo "Area is now mounted" || echo "unable to mount Area"
fi
echo " "
echo "All DONE!"
echo " "
read -p "Press ENTER key to close this terminal"
exit
I don't really well understand what I've to put in rc.local.shutdown....
I think somethings like:
#!/bin/bash
# /etc/rc.local.shutdown: Local shutdown script.
echo "This is a custom script for UN-mount citrix share"
echo "********************************************"
echo " "
echo "|check mount state: if mount then un-mount!|"
echo "+-------------------------------------------------------+"
echo " "
if grep "TsHome" /etc/mtab &>/dev/null; then
grep "TsHome" /etc/mtab | awk '{print "TsHome is NOT mounted -> going on..." $2}'
else
sudo umount /home/Samba_share/TsHOME && echo "TsHOME is now UN mounted" || echo "unable to UN-mount TsHOME"
fi
echo " "
if grep "direction" /etc/mtab &>/dev/null; then
grep "direction" /etc/mtab | awk '{print "direction is NOT mounted -> going on.." $2}'
else
sudo umount /home/Samba_share/direction && echo "direction is now UN mounted" || echo "unable to UN-mount direction pat"
fi
echo " "
if grep "Area" /etc/mtab &>/dev/null; then
grep "Area" /etc/mtab | awk '{print "Area is NOT mounted - Finished" $2}'
else
sudo umount /home/Samba_share/Area && echo "Area is now UN mounted" || echo "unable to UN-mount Area"
fi
echo " "
echo "going shutdown"
echo " "
sleep 5
I've try but it seems to ignore the IF statement... this is the output when ALL share are UNmounted:
$ sh /etc/rc.local.shutdown
This is a custom script for UN-mount citrix share
|check mount state: if mount then un-mount!|
+-------------------------------------------------------+
umount: /home/Samba_share/TsHOME: not mounted
unable to UN-mount TsHOME
umount: /home/Samba_share/direction: not mounted
unable to UN-mount direction
umount: /home/Samba_share/Area: not mounted
unable to UN-mount Area
going shutdown
Tomorrow I will test again when I'm at office.
Meanwhile can you check if I made a macroscopic mistakes?
Thank you again!
Last edited by Alexbit (2010-09-23 17:34:49)

10.4.3 not mounting Samba shares

Similar Messages

Maybe you are looking for