10.4.4 and 10.4.5 issues with Displays

My system use to detect my Viewsonic VA2012w on 10.4.3. Since I've updated to 10.4.4 and 10.4.5, it no longer detects my monitor. Any clues?
MacMini Mac OS X (10.4.5)

Similar Messages

My MacBook Pro 13" (2012) is running Windows 7 on Bootcamp and there is an issue with the headset I'm using.

My MacBook Pro 13" (2012) is running Windows 7 on Bootcamp and there is an issue with the headset I'm using. I use a cheap Logitech Stereo Headset H130, but since there is only on audio plugin on the computer, I purchased a 3.5 mm 4-pin smartphone audio adapter thingy. That allowed me to put both my the sound coming to my headset & the microphone on my headset onto one wire. Everything worked wonderfully when running the Mac OS since they probably have support for that kind of stuff. The problem is though that once I try to use the same method in Windows 7, the OS doesn't recognize my headset microphone at all, but, instead when recording my voice decides to use the built-in mac microphone. Using this adapter still allows me to hear from my headset, but not use the microphone and that becomes a problem. It might be so that Windows 7 doesn't have support\drivers for that... How should I continue from here on out? Any advice?

From what I have read from others on here you may be out of luck. You would need the appropriate Windows drivers for the Cirrus chip in the Mac and no one has been able to successfully locate them. Apple wouldn't support this since Windows is an optional install.
Sorry to bring the bad news.

ITunes and iPhone 4 sync issues with Windows 7 64 bit

I am getting several errors with sync'ing iTunes to my iPhone on windows7 64bit. I reinstalled iTunes, I did a repair on iTunes, even tried a RESTORE on iPhone, but it gives me so many errors one after another after another.
1. Some of the items were NOT copied to iPhone "iPhone" because one ore more errors occured.
2. Attempting to copy to the disk "iPhone" failed. An internal device error occured.
3. The iPhone "iPhone" can NOT be synced. An unknown error occured (0xE8004006).
4. The iPhone "iPhone" can not be synced. The required file can not be found.
5. The iPhone "iPhone" can not be synced. A duplicate filename was specified.
6. The iPhone "iPhone" can not be synced. An internal device error occured.
These errors keep appearing one after the other.
I have fully uninstalled iTunes and ALL Apple programs from my PC, rebooted, disabled antivirus/firewall software, etc.
I have tried changing time zones.
I have created a new user account on same laptop and still have same issues with iTunes.
Restore fails with error "Unable to read file or file is corrupt".
Yet iTunes works fine on a 32bit operating system of Windows 7.
The problem is that I upgraded my laptop and the new laptop is Win7 64bit. I have ALL the newest drivers, and I checked to ensure it was not a BIOS or CHIPSET driver causing issues. All windows updates are up to date and current.
I have been trying for over a week with every piece of trouble shooting I can find to make this work.
Any help or further information would be VERY GREATLY APPRECIATED.
Thanks in Advance

I too am having the exact same issues on the same laptop! I spent an hour last night with "supervisor" in tech support who didn't solve my problem but did close the ticket (210757099 for any Apple people that might read this). Thanks a lot Ben!
I have seven ipod/iphone/ipad devices so I am very familiar with how to sync. In the last few weeks, version 10.2 of iTunes (I'm up to 10.2.1.1) has gotten less and less reliable in successfully sync'ing to the devices. It started out with my 3GS, but my iPhone 4 was fine. Then I got an iPad2 and now NOTHING will sync properly. Every time I plug one in (or press the sync button) it wants to do a restore from the backup made the last time it sync'd. It does that, reboots the device and sync's.
I've gotten a ton of errors, here's a sample.
iBooks couldn't be installed on my iPhone unknown error 0xE800000C
Textie couldn't be installed on my iPhone, unknown error 0xE8000013
"failed required file not found" - This is one of my favorite error messages. It demonstrates how Apple is becoming like Microsoft. It is 100% accurate and totally useless. It would be helpful if it told me the NAME of the file that was not found...
unknown error 0xE8004006
"duplicate file found" - Again, in true Microsoft form, it didn't tell me the NAME of the file that was duplicated.
I tried everything discussed in the following thread but it did not work.
http://discussions.apple.com/thread.jspa?threadID=2401822
Stopping the enhanced USB controller didn't work. Mine is the Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller (version 9.1.1.1020).
A few days ago I got hundreds of errors in a sync. When it completed, a dialogbox came up asking if I wanted to send this crash report to Apple, I said yes. So, crash reports are now automatically being sent. You can see evidence of this in the %appdata%\Apple Computer\Logs directory.
This section of the log looked interesting because it says it couldn't connect to USB mux port 32498
[4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] AMDServiceConnectionReceiveMessage (thread 4232): Could not receive size of message: 0 No error
[4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] readthread (thread 4232): Could not receive message: 0xe8000001
[4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] AMDServiceConnectionSendMessage (thread 2504): Could not send message size: No error
[4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] connect_toport (thread 5700): Could not connect to USB mux port 32498 for device 3: Input/output error
[4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] MobileDeviceConnectlocked (thread 5700): Could not connect to lockdown port on device
Just grasping at straws here....

My itunes account shuts down for no reason. It wont recognize my iphone and there is an issue with network connectivity and itunes. I have already reinstalled itunes and did a syste restore on my computer, firewall checked and virus scan done. Ideas??

My itunes account on windows xp shuts down for no reason. If even try to delete something from my library it shuts down. It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store. I have already reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done. Ideas??

Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

I baked up my iphone and when i had issues with sim lock i got it to finally work isynced my phone with i tunes and lost all apps recently downloaded how do i get it back

i had to get an internet conection from a friend to download akll my apps evrytime i sync with my pc wich already had itunes all apps except statup are gone only thing left was an i tunes song i brought from itunes each time i use my apple id pass word it tells me to retry i do this 4 to 5 times and some times have no success my latest issue was my sim locking buy itself then asking me to put in a sim without a lock , i only have 1 sim i brought 2 phones and have had no issues with the other phone and when i do have the original startup apps i can not move or arange them thru itunes apps and i cannot use sim from other iphone pls help evry1 i ask wouldnt have a clue because there having there own dificulties

If you also backed up to your computer - you can restore from that backup - to retrieve the files. As far as I know- that should have no bearing on deleting them from iCloud - they should still be in that backup.
If you used iOS file sharing with your computer - and saved the files to your computer - you can retrieve them from there.
if the only place that the files were saved to was iCloud, I know of no way to get them back.

I need to get the logs of my iPhone 5. I'm a registered as a developer and I have an issue with one of my app which is already in the market

I need to get the logs of my iPhone 5. I'm a registered as a developer and I have an issue with one of my app which is already in the market

The Firefox 3.5.x branch has reached end-of-life and is no longer maintained.<br />
You will no longer receive security updates.<br />
You can update Firefox via "Help > Check for Updates" or download and install the latest Firefox 3.6.x.<br />
Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Part 2: Flat files and Business Contents: Any issues with this scenario?

I will appreciate some clarification on the some points made in response to my previous post "Flat files and Business Contents: Any issues with this scenario?"
1.
" ...youd better analyze those cubes for data redundancy and presence of data youll never use. " I will appreciate some clarification on the type of analysis you are referring to. Examples will help.
2.
"If you want to combine several found IOs in your custom dataprovider, then again you must know (or figure out) relationships between these IOs." I will appreciate some clarification on the type of relationship you are referring to. Examples will help.
3.
I am a bit confused with "..include into ODS structure ALL fields required for the cube" but you also noted noted that "...except navigational attributes and chars and KFs that are going to be determined in TRs or URs."
If you exclude ALL these, haven't you excluded all the fields you included in the ODS structure?
4.
"Consider carefully the ODS key fields selection. Their combination should not allow data aggregation that you dont need."
I may be missing the point here, I understand that you need to select the fields which will form the unique ID for the records in the ODS under the Key Field (please correct me if I am wrong with the purpose of the Key Field), but I don't understand the discussion of "aggregation" in the context.
Thanks in advance

Hallo
I try to give some exaplanation based on the previous answer.
1. Data redundancy - make sure you do not store the same information. does not make sense to have data redundanty across you Data Warehouse. this is also a cost. just sotre the same information one time if you get all what you need.
2. whatwhever you build you dp, which consist of IO, you need to know with kind of relation (1:1 or 1:n - n:n and so on) exist between them. that will help you when you model you infoprovider. For example I would never pit togheter IO (n:m) in the same dimension if you expect an high number of cardinality. Sometime an IO can be an attribute of another one (depend on relation. For example
Business Partner and his Address. Usually you have a relation 1:1, in this case address is an attribute of BParten and store it in the Masterdata instead then DP
3. Sometime when you load from ODS to CUBE, you can fill some IO (which are in the infocube and not in the ODS)through ABAP routine in TR-Start Routine of Update Rule. Does not make sense to include these IO in the ODS as they are NULL or Blank (the deault value). This can happen when for example, you first load in the ODS (Price and Quantity) and then you calculate Sell price later (Price * Quantity). of course it could be doen also in the Bex. Depends on other factors (Performance - Loaidng -Sizing)
4. Make sure that the KEY definition of ODS is accordingly to the data otherwise you will aggregate the data and later maybe if you need the detail you miss it.
for example: customer - product - Distr Chan - Sell Price
if each Customer can buy each product for any Distrution Channel, then when you build your ODS(Customer - Product and Distribution must be KEY) otherwise (if you have only Customer - Product KEY for example) you will lose the details for Distribution Channel.
I hope eveyrhting is clear
Regards
Mike

I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the secnd point an end point. The pen tool stays active and I either have to clic

I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the second point an end point. The pen tool stays active and I either have to click to isolate the path or I have to return to the first point and close the path. Please help.

artisttouch,
If you cannot close the Pen Tool by switching to another tool, as a temporary measure you may try pressing P (for Pen).
To solve it, you may try the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Since HTC is going to start unlocking thier phones and Verizon has no issue with that

Since HTC is going to start unlocking thier phones and Verizon has no issue with that
those who have unlocked their phones should have no issues with warranty unless they alter the OEM Rom or install a different rom
Most people want to root to get rid of all the bloatware
So we are back to why not let us remove what we want and put this to rest....
Behold, the Power of the Android Community: HTC to Unlock Future
Bootloaders
[Updated: Yes There Will Be] Verizon: There Won’t Be Any Unlocked Devices On Our Network

budone wrote:
I think VZW has no issue (if that is actually true) is because if a phone pukes and it has been rooted, their hands are washed of providing a replacement.
You hit it right on the head, just because they do not lock down bootloaders still does not change that rooting and installing unarthorized firmware or OS violates TOS and voids warrenty which cleans Verizons hands to replace device if it gets damage while doing any of these things to device.

Issue with displaying summary in the Page Bottom

Hi Friends,
I have an issue with displaying summary in the page bottom. for this i am using command BOTTOM and ENDBOTTOM in Main Window.
I designed 2 pages are First and Next, in the first it displays PO Header details and Item details in the Main window and also Item details continuious in the Next Page also.
If the lines are enough in Bottom then it displays the summary. But if the lines are not enough in bottom then it does not trigger the new page, so that it doesn't displays the Summary in Bottom.
for ex: Total lines of the page 50 and Bottom required 15 lines. In the next page contains upto 35 lines, it triggers the Bottom.
But if the lines are more than 35 and below than 50, it does not trigger the new page so that it does not shows the bottom.
Please help me on the same, this is very urgent.I will give a rewatrd if it is helful.
Regards,
Subbarao

HI,
Try with printing the bottom data with Protect and ENDPROTECT along with your Bottom and endbottom.
Eg: Protect
bottom
text
endbottom
endprotect.
Regards,
Venkatesh

Issue with displaying Unicode Characters returned by a webservice

Hi, We are developing a mobile application which provides multi language selection (Arabic & English). but we are having an issue with displaying returned JSON which has Arabic text. The output we get is as below. Our .net client throws the following
exception. Appreciate your kind help and thank you in advance.
[net_WebHeaderInvalidControlChars]
Arguments:
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=4.7.60408.0&File=System.Net.dll&Key=net_WebHeaderInvalidControlChars
Parameter name: name”
Returned JSON:
https://72.44.81.184/~shababcapital/wp-json/posts?type=news&lang=ar
Connection ? Keep-Alive
Content-Type ? application/json; charset=UTF-8
Date ? Fri, 27 Feb 2015 03:35:43 GMT
Keep-Alive ? timeout=1, max=100
Last-Modified ? Thu, 26 Feb 2015 14:43:55 GMT
Link ? <http://72.44.81.184/~shababcapital/wp-json/posts/131>; rel="item"; title="387 Ù?Ø§Ø¹Ø¨ Ù?Ù?Ø§Ø¹Ø¨Ø© Ø¶Ù?Ù? ÙØ¹Ø§Ù?Ù?Ø§Øª Ø§Ù?ØªØ¯Ø±Ù?Ø¨ Ø§Ù?Ù?Ø³ØªÙ?Ø± Ù?Ø§Ù?ØªØ´Ø§Ù Ø§Ù?Ù?Ù?Ø§Ù?Ø¨ Ø§Ù?Ø±Ù?Ø§Ø¶Ù?Ø©", <http://72.44.81.184/~shababcapital/wp-json/posts/119>;
rel="item"; title="387 Ù?Ø§Ø¹Ø¨ Ù?Ù?Ø§Ø¹Ø¨Ø© Ø¶Ù?Ù? ÙØ¹Ø§Ù?Ù?Ø§Øª Ø§Ù?ØªØ¯Ø±Ù?Ø¨ Ø§Ù?Ù?Ø³ØªÙ?Ø± Ù?Ø§Ù?ØªØ´Ø§Ù Ø§Ù?Ù?Ù?Ø§Ù?Ø¨ Ø§Ù?Ø±Ù?Ø§Ø¶Ù?Ø©", <http://72.44.81.184/~shababcapital/wp-json/posts/118>; rel="item";
title="Ø§Ù?Ø¬Ù?Ø¯Ø± Ù?Ø¤Ù?Ø¯ Ø§Ø³ØªÙ?Ø±Ø§Ø± "Ø§Ù?Ø´Ø¨Ø§Ø¨ Ù?Ø§Ù?Ø±Ù?Ø§Ø¶Ø©" ÙÙ? Ø¯Ø¹Ù? Ù?Ø³Ù?Ø±Ø© Ø§Ù?Ù?Ø±Ø§Ù?Ø² Ø§Ù?Ø´Ø¨Ø§Ø¨Ù?Ø©", <http://72.44.81.184/~shababcapital/wp-json/posts/117>; rel="item"; title="Ø§Ù?Ø¬Ù?Ø¯Ø±
Ù?Ø´Ù?Ø¯ Ø¨Ø¯Ù?Ø± Ø§Ù?Ù?Ø±Ø§Ù?Ø² Ø§Ù?Ø´Ø¨Ø§Ø¨Ù?Ø© ÙÙ? ØªØ·Ø¨Ù?Ù? Ø±Ø¤Ù?Ø© Ù?Ø§ØµØ± Ø¨Ù? ØÙ?Ø¯ ÙÙ? Ø§ØØªØ¶Ø§Ù? Ø§Ù?Ø´Ø¨Ø§Ø¨", <http://72.44.81.184/~shababcapital/wp-json/posts/55>; rel="item"; title="Ø§Ù?Ø¬Ù?Ø¯Ø±: Ù?Ø¯ÙÙ?Ø§
ØªØÙ?Ù?Ù? Ø£ÙØ¶Ù? ÙØ±Øµ Ø§Ø³ØªØ«Ù?Ø§Ø±Ù?Ø© Ù?Ù?Ø£Ù?Ø¯Ù?Ø© Ø§Ù?Ù?Ø·Ù?Ù?Ø© Ù?Ù?Ø¨Ø§Ø±Ù? Ø§Ù?Ù?Ø´Ø±Ù?Ø¹ Ø§Ù?Ø¬Ø¯Ù?Ø¯", <http://72.44.81.184/~shababcapital/wp-json/posts/45>; rel="item"; title="Ø§Ù?Ø¬Ù?Ø¯Ø± Ù?Ø´Ù?Ø¯ Ø¨Ø¯Ù?Ø±
Ø§Ù?Ù?Ø±Ø§Ù?Ø² Ø§Ù?Ø´Ø¨Ø§Ø¨Ù?Ø© ÙÙ? ØªØ·Ø¨Ù?Ù? Ø±Ø¤Ù?Ø© Ù?Ø§ØµØ± Ø¨Ù? ØÙ?Ø¯ ÙÙ? Ø§ØØªØ¶Ø§Ù? Ø§Ù?Ø´Ø¨Ø§Ø¨"
Server ? Apache
Transfer-Encoding ? chunked
X-Content-Type-Options ? nosniff
X-Pingback ? http://72.44.81.184/~shababcapital/xmlrpc.php
X-Powered-By ? PHP/5.4.24
X-WP-Total ? 6
X-WP-TotalPages ? 1

I originally downloaded it using IE and viewed the content in Fiddler. Use this code to get the content:
string url = "https://72.44.81.184/~shababcapital/wp-json/posts?type=news&lang=ar";
HttpBaseProtocolFilter MyFilter = new HttpBaseProtocolFilter();
MyFilter.IgnorableServerCertificateErrors.Add(Windows.Security.Cryptography.Certificates.ChainValidationResult.InvalidName);
HttpClient request = new HttpClient(MyFilter);
string response = await request.GetStringAsync(new Uri(url));
MyContent.Text = response;
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Performance Issue With Displaying Candidate Details for iRecruitment

We are in EBS R12.1.3 when we trying to display the Candidate Details page in iRecruitment iRecruitment >vacancies>applicants> click on applicant> the page spins for a quite whille to show the results and some times we see the 500 errors..
We are in R12.1.3 and also applied the Patch.10427777:R12.IRC.B patch.. is there any tunnign steps for the iRecruitment page=/oracle/apps/irc/candidateSearch/webui/CmAplSrchPG

You have already applied the patch mention in note: Performance Issue With Displaying Candidate Details Page in 12.1.3 (Doc ID 1293164.1)
check this note also Performance Issue when Clicking on Candidate Name (Doc ID 1575164.1)
thanks

Issue with displaying text in BEx

Hi all,
We are facing an issue with displaying text in the query output.
We have a master data carrying charac ' 0MATERIAL'.When i do maintain master data ,I am able to see medium description in the output.
Now when i drag 0MATERIAL in bex designer and in properties set display to key and text(medium text), it shows me only the key and it shows some wierd text which is in no way related to the medium description ( that was shown under maintain master data)
can anyone pls tell me why i am not able to see the medium description when executing the query that too when the text is loaded.
Pls help
Regards,
Suchitra

But what i wouldlike to know is what about the master data which is present in 0MATERIAL now?
Nothing will happen to your data.
Its showing there ...dosent that mean its present and activated?
They are present n in active version.
If u change any records they will be in M version..by activating the data...u are converting it to A version.
Regards,
Ram.

Issue with displaying Greek characters in Oracle 11.1

Hi,
We are having issues with display of Non-English language (for ex Greek) text on Pega-PRPC. The text is stored in a reference table in Oracle DB. However there is not need of translation in PRPC as it has the capability of displaying non-english language also.
I believe that it is a issue with DB settings, although not sure of what is the setting.
Below is the result after running the query: select * from nls_database_parameters
NLS_LANGUAGE     AMERICAN
NLS_TERRITORY     AMERICA
NLS_CURRENCY     $
NLS_ISO_CURRENCY     AMERICA
NLS_NUMERIC_CHARACTERS     .,
NLS_CHARACTERSET     AL32UTF8
NLS_CALENDAR     GREGORIAN
NLS_DATE_FORMAT     DD-MON-RR
NLS_DATE_LANGUAGE     AMERICAN
NLS_SORT     BINARY
NLS_TIME_FORMAT     HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT     DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT     HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT     DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY     $
NLS_COMP     BINARY
NLS_LENGTH_SEMANTICS     BYTE
NLS_NCHAR_CONV_EXCP     FALSE
NLS_NCHAR_CHARACTERSET     AL16UTF16
NLS_RDBMS_VERSION     11.1.0.6.0
Please help.

869852 wrote:
Hi,
We are having issues with display of Non-English language (for ex Greek) text on Pega-PRPC. The text is stored in a reference table in Oracle DB. However there is not need of translation in PRPC as it has the capability of displaying non-english language also.
I believe that it is a issue with DB settings, although not sure of what is the setting.
The first question that needs to be answered is whether the problem is a data storage problem or data presentation problem.
The query below will answer this question.
SELECT ASCIISTR(greek_column) from greek_table where key_id = <specific_value>;

Outlook 2013 Not Responding and Offline Address Book Issues with Office 365

Around 3 months ago I setup a small business with Office 365 for email. They have 10 PCs, all running newly installed Windows 7 Professional 64-bit, eight with Office 2013 and two with Office 2010. All are connected to a local domain (Server Essentials
2012) with a single internet connection through a new TP-LINK router. Each user logs into their own PC only.
The network runs perfectly, internet connection is good but there seems to be RANDOM, INTERMITTENT issues with email not being SENT from Outlook every so often. Email will sit in the outbox for up to an hour sometimes before, eventually, being sent. Incoming
email seems ok, although this is more difficult to tell. At others times, email will be sent instantly - the size of the message and any attachments makes no difference.
The issue has happened at some point on every one of the PCs but no particular PC/user seems worse than any other. When email is stuck on one user's PC it can still be sent ok by other users at the same time - so the internet connection is not down. Users can
can always login to the OWA service ok and iPhones etc. all sync ok even when email is stuck in the Outbox.
To debug the issue I have worked on one particular user's PC and carried out the following changes -
Changes that made no difference
I have checked the router. A SPI firewall is available on the router but this is switched off.
I have changed the MTU on the router with no effect.
There are no unsual add-ins to Outlook
Outgoing email virus scanning is disabled
Outlook is NOT integrated with Lync
The OST file is around 1.7 GBytes is size.
I have recreated the Outlook profile twice but this made no difference
Switched OFF "Cached Exchange Mode" - this made things worse !
The Outlook address book is set to \Offline Global Address List
I have disabled with Windows firewall on the client PC - no change
I have adjusted the KeepAliveTime for packets in the registry of the PC to 20 minutes
Changes that reduced the frequency of "Not Responding"
I have changed the Outlook automatic Send/Receive time from 30 to 10 minutes - this seemed to help
Possible Related Problem
I have attempted to download the offline address book manually - this hangs at "Copying offline address book template file" in the Send/Receive dialog and there a NO OAB files in the data file location on the PC.
So the only measure that has so far "helped" has been the Outlook Send/Receive time change - now set to 10 minutes. Even so, Outlook will occasionally go "Not Responding" for 30 minutes or more (no windows active - only option
is to close and reopen Outlook).
There does seem to be a problem with the Offline Address book. I can download this ok for this user on my home PC (Outlook 2010) but this will not download manually on the work pc with Outlook 2013 (despite following all the debug steps above).
On work PC I can see literally hundreds of "Schannel" errors in the Windows System event logs -
Error - Event 36888 Schannel
The following fatal error was generated :10
The internal error state is 10
These errors occur every 2-4 minutes continually all the time Outlook is running. When Outlook is closed the "Schannel" errors stop !
Can anyone suggest what else to try, please ?
I have already investigated this issue on the Office 365 Community Forum, and the Outlook forum and they suggested that it was a client (i.e Outlook) issue and that I should post here for further information.
Thanks for reading !

An update to this problem.
I brought one of the office PCs back to my home network and connected it up there. With no changes to the PC I was immediately able to download the Offline Address Book without errors.
This suggests to me that there must be some problem with the internet connection or router setup in the office environment.
The router is a TP-LINK W8970. The internet connection is PPPoA. I have seen some suggestion that an SPI firewall can cause issues. This router has an SPI firewall but this feature is disabled on the router.
While investigating this issue I have frequently been connected remotely to an office PC - sometimes for up to an hour or more. During these periods I have not experienced any connection dropouts so the actual internet connection seems to be ok (i.e. it is
not dropping out).
However, something seems to be preventing the Outlook client from connecting properly with the Office 365 Exchange server in the office environment - or something is dropping the connection to Outlook. Does anyone know of any router settings that might affect
this ?
I could try changing the office router but I do not have a spare available. Can anyone suggest a reasonably low cost, currenbtly available router that they know definitely works in the Office 365 environment so that I could buy this for test purposes ?

10.4.4 and 10.4.5 issues with Displays

Similar Messages

Maybe you are looking for