10.4.4 Linksys Wireless-G Card

Hi, i just do the update to 10.4.4 and now i dont have power in my Linksys Wireless-G 2,4 GHz PCI Card, i try to redo the update not with software update but with the Combo update, but i dont have power in the PCI card any idea?
PB G4 867mhz Mac OS X (10.4.3)

Hi-
I have read reports of users using the WMP54G PCI adapter in Mac's with success. The WPC54G may work, as a Buffalo card did, but I have no confirmation of this.
A Buffalo version, BUFFALO WLI-PCM-L11GP Airstation 11MBPS Wireless PCMCIA Card 802.11B Pc/mac used the Broadcom 54 chipset making the profiler see an Apple native device, and the cards perform with OSX native drivers. The card has been discontinued, though.
The following may be of interest to you:
http://www.powermax.com/product/AirplugG_Wireless_USB_Adapter_802.11g_54mbps_-_Airport_cardreplacement!/e01606.html?PHPSESSID=68c9
G4 AGP(450)Sawtooth Mac OS X (10.4.8) 2ghzPPC,1.62gbSDRAM, ATI9800, DVR-109,(IntHD)120&160,LaCie160,23"Cinema Display

Similar Messages

Driver for Linksys Wireless-N CArd

Hi
We need drivers for A Linksys card for the G5 , The card is WMP300N...HELP?????
We can't find anything...
Any help is greatly appreciated
Liz

Hi Steve Webster-
There aren't any Mac drivers as that card is for a Windows machine.
Luck-
-DaddyPaycheck

Linksys Wireless Card (Linksys Router) in G4 Power Mac works fine until...

Linksys Wireless Card (Linksys Router) in G4 Power Mac works fine until...
new software upgrades on the 14 August 2006 (yesterday) which includes Airport 4.2.
The Linksys wireless PCI card (WMP54G) was installed just under a year ago with no problems. There was no need to install drivers, the Apple Mac recognised it and used it as a wireless card. I was browsing the internet last night (14 August) and the software updates downloaded in the background. Once it finished downloading, it requested for a re-start. I carried on browing the internet and then switched off my machine and went to bed.
When I turned on my computer in the morning, the wireless card no longer activates. The computer recognises there is a card but there is no connection to the router (meaning no internet). The router settings have not changed at all.
I believe it could be the Airport 4.2 update has interfered with the Linksys Card, but I'm not sure. I've been through all the Assist functions etc and there is no luck. It does seem that the big update released on the 14th August has played its part.
Any opinions and assistance on getting the card back to normal, and if possible assistance in removing the new updates to previous drivers/settings.
Thanks people.
G4 Power Mac Dual Processor Mirrored Doors Mac OS X (10.3.9)

Sorry, I do not have a solution for you but I have the same problem upgrading from Jaguar to Panther (on my home machine not listed which is a G3 b&w). Now my WMP54G doesn't see any wireless network (I used to be able to see several in the 'hood), and Apple Profiler recognizes the card. Apple updater changed the Airport system files, I believe.
Is it possible to find the old Airport software and install over current system to get it working again? I doubt Apple still offers the old airport software, but if someone has it, maybe it can be installed with Pacifist.
We need some wireless help here, community.
2.5 GHz Dual PowerMac G5 | 3GB RAM | SuperDrive Mac OS X (10.4.6)

Linksys Wireless Network monitor overrides Windows XP Wireless Zero Configuration

Hello all,
I am currently using the wireless router Verizon sent me and it works fine when using the Windows XP Wireless Zero Configuration tool. Previously I was using a Linksys wireless router and I have the Linksys Wireless Network monitor installed. About half the time when starting up the computer, the Linksys monitor starts up and I have to manually switch to the Windows XP Wireless Zero Configuration tool. This is very irritating and I would like to know if there is a way I can remove the Linksys Monitor and still be able to use the Linksys wireless adapter cards installed in the computer.

I think I know.
#1 http://netsquirrel.com/msconfig/msconfig_xp.html
#2 Very carefully, look through the list in MSConfig.
#3 Disable the Linksys Wireless Network monitor.
Restart the computer as need be.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

How do I connect my laptop to my Linksys wireless router through the internal wireless card?

I just purchased a gateway laptop and was trying to hook my Linksys wireless router up to it. Ive gotten it hooked up but only through the secondary device (that catches the signal)... I was wondering if there is anyway that I could make my internal wireless internet card a point or no? Can I only connect it to the USB network adapter or is there really a way to go COMPLETELY wireless? Thank you for your time...

Is your internal wireless card enabled? Go to device manager and make sure it is enabled.
Chuck

LinkSys Wireless Card connects to "Access Point" but no internet connection

I have 2 LinkSys wireless cards. one is 802.11g, the other b. The signal for the Airport Extreme 802.11n Wi-Fi Wireless Base Station is very strong, but when I try to connect, it says "You are connected to the access point, but the Internet cannot be found". No internet access, and I can't ping anything (Ping request could not find host...). And of course the printer hooked to the AirPort is also not recognized. My iMac and Macbook both have no problems connecting to the network. There is no problem with ethernet connection to the Airport. Is it possible to have a compatibility problem between the Linksys and Airport hardware? I thought as long as they were were compatible 802.11, they would work together. The cards had no problem with my old DLink router or other hotspots in the city. Is there a set-up I missed for setting up the PC-based cards with the AirPort?

Is your wireless network secured?
The box said windows xp or better... So I installed Linux!

Linksys wmp11_v4 wireless pci card finally working

It's a common cheap wireless pci card. I just got it working today so thought i would post it here in case anyone searches for wmp11.
Heres how i got it to work.
The _v4 pci cards use an inproconn chipset. I have it working perfectly with ndiswrapper and this driver ftp://ftp.linksys.com/pub/network/wmp11_v4_dr.zip
you have to ./configure && make && make install ndiswrapper from source!!! Then load all 3 inf files with 'ndiswrapper -i file.inf'
I added 'wlan0="dhcp"' to rc.conf and added ndiswrapper to the modules. instead of restarting, as root 'modprobe ndiswrapper'
lastly do 'ifconfig wlan0 up', after that either use the gtk wifi-radar or kwifimanager or read some man pages...
I'm stealing my neighbors wireless right now using this card..
Last edited by droog (2007-06-30 08:01:09)

The error you're getting means the card is having a hard time properly connecting to the signal of your router. This maybe a cause of interference or a distance problem. Since everything was working before, it's possible that a new interference in your environment is causing the problem or there's something wrong either with the router or the card.
Have you picked up other SSIDs on the card also showing a decent signal strength and using the same channel as yours? You may also upgrade the firmware of your router or update the driver of the card though.

Linksys wireless card problems

Just today, I purchased the new Airport Extreme and hooked up the wireless network to my iMac. My roommate has a PC with a new Linksys wireless card. When trying to access the iternet using the Airport Etreme, it gives an error saying that 'Cannot associate with the access point'.
Our neighbor has an unsecured wireless connection and she can use that just fine. How can we get her onto our own wireless network?
Thanks!

Per chance to you have your AX configured to NOT broadcast its "Network Name?" (Note: In the PC world, this would also be called the SSID.) If so, I would re-enable it so that it does.
As the issue is most likely Wireless Zero Configuration (WZC) on your PC, I would try the following:
o In the WZC menu, remove all of the preferred networks, and then, restart the PC.
o With the AX configured for WPA Personal, add back the AX's network as your preferred network.
Did WZC find the AX's network? If not, can it find any networks in the local area? If it did not find the AX's network, did it allow you to add it? Can you PC connect to any other wireless network?

Linksys Wireless N Router w/ Belkin Wireless G Adapter Connection?

I recently bought a Linksys wireless n router to better serve my two new laptops with wireless n cards. They are now lightning fast and super reliable. However, my desktop, which has a Belkin wireless g card connects about a third as fast and last only about 5-10 minutes before needing to be reconnected, which can cometimes take a while itself. I changed the channel to 11 which helped a little and am running the router on 20 MHz only.
My previous router was a Belkin wireless G.
I'm looking for answers/explanations and possible solutions to speeding up my desktop's speed and increasing its reliability w/o jeopardizing my laptops' supreme performance.
Thanks for your help,
~Josh

Set the Channel Width to 40MHz only,Wide Channel to 9 and Standard Channel to 11-2.462GHz and click on save settings...Under the Advanced Wireless Settings...Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...Under the Security tab,uncheck.. dw(vs_internetfilter0);Filter Anonymous Internet Requests and click on save settings..Now,power cycle the router and check...

PCI Card Slot - Wireless LAN Card Problems - Help!

Help.
I'm having problems getting my board to recognize both:
Linksys WMP11 Wireless LAN card; and
Netgear WG311T Wireless LAN card
(returned the Linksys card, but the Netgear card had the same problem).
Neither card is being picked up by Windows (XP Home), although both the "power" and "link" LED lights up when inserted. I've tried every PCI slot, same issue. Nothing shows up in the device manager, and no new hardware is detected. The Netgear software tells me that the card has not been installed.
Am left thinking I need to RMA the board. Any suggestions woudl be much appreciated.
K8N Neo Platinum
AMD 64 3200+
512mb OCZ 3200EL
Samsung 120mb SATA 7200rpm
Pioneer 108D DVD
Sapphire 9600xt

My roommate has a similar setup as you and I am having the same problem getting a pci wifi card to work in the machine. I have tried both a Linksys WMP54G and a Netgear WG311. Both cards will scan for networks bit will never connect my router (Linksys WRT54G). Just to get them to recognise the network, I have to turn off WEP, and turn on ESSID broadcast. Both of these cards work prefect in other computers. I know it not a signal problem because I can take my laptop and set it in the same location and it gets excellent signal.
I have tried changing slots in the machine, the wifi cards were the only PCI cards in the machine and an GeForce 6800 GT in the AGP slot. I have no idea what the problem could be. But I'm leaning towards the mobo at this point.

My Wireless PCI card 2.4GHz (Desk Top No Lap Top) is in m...

My Wireless PCI card 2.4GHz (Desk Top No Lap Top) is in my computer in my room and my Dad has the router in his room. Hes connected but the wireless PCI card in my room says im connected to his router but i can't get on the internet?? i tryed the following.
1.Entering the IP address that listed on my computer (when i click the connection that says im connected and click the tab at the top to the right and press details and i put the Subnet Mask and IP adress in the spots avalible when i put up the linksys screen this when i did this it showed the connection working at the bottom right on my screen the little green connection on the computer but still can get on the internet, Befor i did all that i left all that blank and it said Limited or no connectivity)
2.My Dad put his IP adress in insted of the on on my computer but he left the DNS and Defalt Gateway Blank (Possible Problem let me know?)So is showed the connection at the bottom of my screen but still not internet. So my dad made a new connection called (Linksys) and had no Security on it and we connected to it but Guess what...No Internet
3.My dad's other connection Henry1 has security and in the phrase box i enter his Pharse number and it connected everything was looking good i clicked up the internet, at the bottom left on the internet screen said Detecting Proxy sever loaded a bit got me excited the BOOM!! No connection
4.I pressed START-RUN-typed CMD at command prompt typed ipconfig/all
this showed my IP and Subnet mask put those in for that in the linsys box provided Note: in the linksys PCI confige there are several options i have no idea on what to put there like the DNS and Defalt Gateway Subnet mask or IP adress Plesea tell me what to put here.
Please excuse my Spelling and typo's im sure there are plenty but im at the library and i gotta work fast.
and Please list all possible problems Note: i have no way of seeing my dads computer so im just guessing by what's on my computer so tell me what my dad might have done wrong also.
(Mod Note: Removed Email address.)
Message Edited by daikunzeon on 09-14-2007 07:12 AM

Okay... first off let me know which operating system are you using and model and version no. of the adapter?? if you are using Win XP system try uninstalling the adapter from the computer...click on start >> programs >> wireless G PCI adapter >> uninstall, put the CD in for the adapter and restart the computer, one window pops up "found new hardware" try installing the drivers, no need to install WLAN software or utility and use windows WZC (wireless zero configuration) to manage wireless connection...check whether it works for you or not and let me know.

Getting Wireless PCMCIA card to work

Attempting to get a Linksys wpc54G wireless PCMCIA card to work on my 1.5Ghz G4 PB.
I verified that the card works, by plugging it into to a PC.. ( works fine)
Plugging the card into my pcmcia slot, on nothing. No lights.. nothing.
I get the PCMCIA icon on the menu bar, three options
unknown vendor <-grayed out
Network controller <-grayed out
Power card off.
I read where there might be some hack that I have to do to get PCMCIA support running, but no clues after that.
Any help is greatly appreciated...
Larry

Hi,
When I got my PCMCIA wireless card (not Linksys) it came with an install CD. The G4 maybe wouldn't of known what it was or what to do with it on it's own, needed the install feature.
Works fine once installed. Did you get an install CD for it from Linksys? For the Mac OSX? If not, it might pay to check their web-site for one.

Linksys Wireless-B Router

Can someone tell me how to download software for model BEFW11S4?

http://www.linksys.com/servlet/Satellite?c=L_CASupport_C2&childpagename=US%2FLayout&cid=116685987888...
From Chris
Linksys Wireless-G WAG54GS ADSL Gateway
Newlink Wireless 11g 54Mbps PCI card worked with Windows 7 64-bit

Conflict with Linksys Wireless C

I've recently installed a Linksys Wireless Networking WMP54G card in my desktop and apparently it is conflicting with my Audigy 2 Soundblaster card (i.e. each works fine by itself, but the system keeps re-booting if they are installed together and won't boot into Windows XP at all).
I'm using Windows XP Professional with Service Pack 2 and Linksys tech support has been no help at all, simply telling me it's an OS issue and there's nothing they can do. I already tried manually assigning IRQ numbers to each of the PCI slots in the BIOS, but that doesn't seem to have done anything, since when I view "System Information" in windows, the IRQ for both the Linksys card and the Audigy are changed to IRQ 7 (instead of 0 & , as I had manually assigned in the bios).
Does anyone know if there's a way to change the IRQ setting on the Soundblaster Audigy 2 card, so that it doesn't conflict with my Linksys card? Or, alternati'vely, is anyone familiar with any XP settings that I can change to get XP to assign a different IRQ to the Soundblaster card?
At least a link to any possible information would be very much appreciated. It's been three days now of trying to get these two cards to work together and I'm about to throw the whole thing out a second story window!
Thanks!
:angry:

check your bios if the option Plug&play os is enabled.
This because Linksys is right, windows handles the irq/dma sharing automatically.
And as you experience not always the right way.
Maybe you can move one of the two cards in another pci-slot(move them as far as possible away from each other(Linksys+Creative card).
i guess you can better contact M$...(if you've a legal windows).
Or try a Linux boot cd(li've cd linux that runs from cd like knoppix). Because if you've the same problem with a linux li've cd then it must be a hardware issue, if it works fine with Linux Li'veCd then it's a Windows issue like Linksys try to explain.
knoppix li've CD: (download image and burn it to cd-r, then start computer(boot) with this cd-r in it)
http://www.knopper.net/knoppix-mirrors/index-en.html
oh "and I'm about to throw the whole thing out a second story window!" advise: throw the soundcard away!
p.s. congratulations with your Wireless Fidelity hardware...WiFi=freedom !!!(compared to commercial isp's)Message Edited by www_96KHz_tk on -4-2005 2:05 PM

Problems with Linksys Wireless-B Adapter

I was wondering if anyone had any problems setting up a wireless network using their MSI Neo2 Platinum. I currently have a linksys wireless adapter connected to mine, and there is no wireless signal being received by the adapter. The adapter is getting power, and is detected by XP, but there is no signal. I tried moving the computer closer to the router, but to no avail. I currently have the PCI card connected to the network PCI slot, but before I had it in one of the others. Made no difference really.
I called linksys and that didn't work. The same card works in a biostar board that my sister's computer has, and works perfectly there. I can't seem to find the problem so now I'm going to go ahead and blame it on this wonderous motherboard :P. System specs if you need it:
Processor: FX-55
Motherboard: MSI Neo2 Platinum
Memory: Corsair TwinX1024 PC3200
Hard Drives: 2 Seagate Barracuda's 120 GB (each) SATA
What's wrong?! Thx in advance for the help.

My son hooked up a Linksys 2.4 GHz Broadband Router to my Yahoo DSL modem. My Mac computer operates on OS 10.2.8 and my son's computer is a PC laptop. Everything was working fine until I my desktop screen went blank. I reinstalled everything and attempted to install Yahoo DSL. While I could not operate DSL on my Mac, my son was able to use the internet on his PC laptop. I disconnected the router and reloaded Yahoo DSL software and it works, but my son can't use the internet now. Recently Microsoft discontinued support Internet Explorer (IE) for Mac computers. Do you think I need to re-install IE on my computer even though I don't use it? When I installed Yahoo DSL, the Yahoo DSL icon never reappeared. All I do now is click on Firefox, Netscape, or Safari to get on the internet.

10.4.4 Linksys Wireless-G Card

Similar Messages

Maybe you are looking for