10.4.5 Update Package fails to install

Hello,
I've downloaded the 10.4.5 update (MacOSXUpdCombo10.4.5PPC.pkg) but it won't install. It gives errors during the process, then asks to try again.
I had this problem with the 10.4.4 update as well. I'm still at 10.4.3.
I have never had problems with this process prior to trying to update from 10.4.3.
Any ideas?

Usually this means you have a corrupted system or hard drive (assuming the download is OK.) Try the following:
Boot from your Tiger DVD. After the installer loads select Disk Utility from the Utilities menu. After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.1.1 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Similar Messages

Update KB2685811 fails to install on Windows 7 64bit

Update KB2685811 fails to install on Windows 7 64bit FROM WINDOWS 8.1

Hi,
Based on my research, this update package only applies to Windows 7 and Windows server 2008 R2. Windows 8.1 doesn't support this update.
If you need any further assistance, please feel free let us know.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

ERROR: DW006: Apple Package failed to install successfully. ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1

Hi,
i have the following message when i tried to install LR 5.6
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DW006 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe Photoshop Lightroom 5.pkg_5.6 -----------
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1
how can i solve this issue?
I am running on Mac with OSX 10.9.4
thanks in advance
Olivier

olebreth wrote:
how can i solve this issue?
A search of the site would probably be a good start:
https://forums.adobe.com/search.jspa?q=dw006

Bought a new iMac 27" yesterday. Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applicati

I bought a new iMac 27" yesterday, running with Mavericks OS. Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applications it says "There was an error downloading this update. Please quit and try again later." Have done this several times. Suggestions?

update manually,: http://www.adobe.com/downloads/updates/

Adobe Photoshop CS5 Windows Finnish update files failed to install/load

Adobe Photoshop CS5 Windows Finnish update files failed to install/load.
Loading updates fails at the end of the loading. Tried it yesterday and today same errors. Are the files corrupted at server or how to fix this ?
Adobe Bridge CS5 4.0.5-update
Adobe Extension Manager CS5 5.0-update
Photoshop Camera Raw 6.7-update
Photoshop CS5:n Photoshop 12.0.4-update

update by downloading the files directly and then applying them:
pre cc updates: http://www.adobe.com/downloads/updates/

ERROR: DW006: Apple Package failed to install successfully. ERROR: Third party payload installer Adobe Acrobat XI Pro Installer.pkg failed with exit code: 1

Hi All, anyone with this problem with Acrobat Pro XI, IM USING MAC, also Yosemite if that helps.
Also Adobe CC, BASICALLY IT just quit and i had to uninstall, re install, and I get this
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Acrobat XI Pro Installer.pkg failed with exit code: 1
Anyone with same issues...

Same problem. Creative Cloud subscriber running Mac 10.10.2 on iMac (Retina 5K, 27-inch, Late 2014). All apps work fine EXCEPT for Adobe Acrobat XI. I have tried 100 times and 100 solutions. NOTHING works.

Apple Package Failed to Install Successfully

Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DW006 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.3.0.0 Adobe Photoshop Lightroom 5.pkg_5.3 -----------
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1
So now what???

Thanks but I'm in Apple so no Temp file as in Windows. This is like a journey back in time to the days when you had to feel comfortable accessing and renaming folders on your computer instead of just starting and using the application you have paid for. I assume Adobe were able to take my subscription money without difficulty...
Sent from my iPad

Error Message reads: "Adobe Acrobat Updater Certificate failed to install."

I am unable to make any updates to my Adobe programs (including creative suite CS3). Everytime I try, I type in my password, but I always get the same error message: Adobe Acrobat Updater Certificate failed to install.
I believe this is happening because I actually inherited my Adobe programs, including the MacBook Pro the programs are installed on. The owner used to be a relative who, sadly, passed away. I thought I had changed everything to be under my name as the owner, but having never done it before it's possible I missed something? Perhaps my relative's name is still recognized as the owner?
Please help as this is wreaking havoc in many "little" ways...
Thanks.

Had the same problem. Found two updaters on the computer. Go to "applications/utilities/adobe utilities". Threw away the folder "Adobe Updater5". Ran the "Adobe Updater6/Adobe Updater.app". Problem gone.

Adobe Acrobat Updater Certificate failed to install.

Adobe Acrobat Updater Certificate failed to install. I am running Mac OS X 10.6.3 on a MacBook Pro. What can I do to get it to install this update?

hi
You can go to the location applications/utilities/adobe utilities.
Here you will find an application called as the Adobe Updater6/Adobe Updater.app try running one of them would definitely install the updates on your system.
thanks regard
anup

Smpatch update ALERT: Failed to install patch

I do not even know where to start. Since installing Solaris 10 0606 it
seems every time I try to patch the system I get failures of one type
or another. One problem today has to do with zones:
"To install the new instance of this package in all zones you must
first remove the existing instance of this package from the global
zone first (via pkgrm) and then install the new instance of this
package in all zones."
If sun already knows a pkgrm must be run why can't the smpatch command
just do it?
Another problem seems to be
For patch 121018-03, required patch 120759-04 does not exist
If sun knows a patch is required which is not on the system just Getit
and install it.
Also, what is up with having to reboot the box to install patches?
Why? Has this always been a required step? Do these reboots pertain only to kernel patches .etc?
I have seen other postings in this forum expressing unhappiness with
the patch system, some mentioning testing lab/group or certification
issues. I think smpatch should have an option to send smpatch results
back to sun for review. That way the Certification Group could have
real life situations to investigate. Or do they know the problems
already and just dont want to fix them? Just once I would love it if
smpatch came back with no failures and I was assured the system was
patched, up to date and secure.
Regards
# smpatch update
Update 120759-07 will not be downloaded since it already exists in the
download directory.
Update 121018-03 will not be downloaded since it already exists in the
download directory.
Update 121016-03 will not be downloaded since it already exists in the
download directory.
Update 121020-02 will not be downloaded since it already exists in the
download directory.
Update 121616-02 will not be downloaded since it already exists in the
download directory.
Update 120762-02 will not be downloaded since it already exists in the
download directory.
Installing patches from /var/sadm/spool...
Failed to install patch 120759-07.
patchadd utility failed. Reason code :0
Validating patches...Loading patches installed on the
system...Done!Loading patches requested to install.Done!Checking
patches that you specified for installation.Done!Approved patches will
be installed in this order:120759-07 Preparing checklist for
non-global zone check...Checking non-global zones...The following
requested patches rejected on non-global zone.Entire installation is
possible but those patcheswill not be installed on non-global
zone.myzone: Packages from patch 120759-07 are not installed on the
system.myzone2: Packages from patch 120759-07 are not installed on the
system.This patch passes the non-global zone check.None.Summary for
zones:Zone myzoneRejected patches:120759-07 Patches that passed the
dependency check:None.Zone myzone2Rejected patches:120759-07 Patches
that passed the dependency check:None.Patching global zoneAdding
patches...Checking installed patches...Verifying sufficient filesystem
capacity (dry run method)...Patch 120759-07 failed to install due to a
failure produced by pkgadd.See /var/sadm/patch/120759-07/log for
detailsPatchadd is terminating. WARNING: patchadd returned <5> for
global zone
ALERT: Failed to install patch 120759-07.
Failed to install patch 121018-03.
patchadd utility failed. Reason code :0
Validating patches...Loading patches installed on the
system...Done!Loading patches requested to install.Done!Checking
patches that you specified for installation.Done!The following
requested patches will not be installed becauseno patches required by
the patch are installed on this system. 0 For patch 121018-03,
required patch 120759-04 does not exist.No patches to install.
ALERT: Failed to install patch 121018-03.
Failed to install patch 121016-03.
patchadd utility failed. Reason code :0
Validating patches...Loading patches installed on the
system...Done!Loading patches requested to install.Done!Checking
patches that you specified for installation.Done!The following
requested patches will not be installed becauseno patches required by
the patch are installed on this system. 0 For patch 121016-03,
required patch 120759-06 does not exist.No patches to install.
ALERT: Failed to install patch 121016-03.
Failed to install patch 121020-02.
patchadd utility failed. Reason code :0
Validating patches...Loading patches installed on the
system...Done!Loading patches requested to install.Done!Checking
patches that you specified for installation.Done!The following
requested patches will not be installed becauseno patches required by
the patch are installed on this system. 0 For patch 121020-02,
required patch 120759-01 does not exist.No patches to install.
ALERT: Failed to install patch 121020-02.
Failed to install patch 121616-02.
patchadd utility failed. Reason code :0
Validating patches...Loading patches installed on the
system...Done!Loading patches requested to install.Done!Checking
patches that you specified for installation.Done!Approved patches will
be installed in this order:121616-02 Preparing checklist for
non-global zone check...Checking non-global zones...The following
requested patches rejected on non-global zone.Entire installation is
possible but those patcheswill not be installed on non-global
zone.myzone: Packages from patch 121616-02 are not installed on the
system.myzone2: Packages from patch 121616-02 are not installed on the
system.This patch passes the non-global zone check.None.Summary for
zones:Zone myzoneRejected patches:121616-02 Patches that passed the
dependency check:None.Zone myzone2Rejected patches:121616-02 Patches
that passed the dependency check:None.Patching global zoneAdding
patches...Checking installed patches...Verifying sufficient filesystem
capacity (dry run method)...Patch 121616-02 failed to install due to a
failure produced by pkgadd.See /var/sadm/patch/121616-02/log for
detailsPatchadd is terminating. WARNING: patchadd returned <5> for
global zone
ALERT: Failed to install patch 121616-02.
Failed to install patch 120762-02.
patchadd utility failed. Reason code :0
Validating patches...Loading patches installed on the
system...Done!Loading patches requested to install.Done!Checking
patches that you specified for installation.Done!Approved patches will
be installed in this order:120762-02 Preparing checklist for
non-global zone check...Checking non-global zones...The following
requested patches rejected on non-global zone.Entire installation is
possible but those patcheswill not be installed on non-global
zone.myzone: Packages from patch 120762-02 are not installed on the
system.myzone2: Packages from patch 120762-02 are not installed on the
system.This patch passes the non-global zone check.None.Summary for
zones:Zone myzoneRejected patches:120762-02 Patches that passed the
dependency check:None.Zone myzone2Rejected patches:120762-02 Patches
that passed the dependency check:None.Patching global zoneAdding
patches...Checking installed patches...Verifying sufficient filesystem
capacity (dry run method)...Patch 120762-02 failed to install due to a
failure produced by pkgadd.See /var/sadm/patch/120762-02/log for
detailsPatchadd is terminating. WARNING: patchadd returned <5> for
global zone
ALERT: Failed to install patch 120762-02.
/var/sadm/spool/patchpro_dnld_2006.08.22@11:16:20:EDT.txt has been
moved to
/var/sadm/spool/patchproSequester/patchpro_dnld_2006.08.22@11:16:20:EDT.txt
#

Enterprise users have strict policies on change management so dependent patches are not automatically installed when using "smpatch add". Neither are packages blithly uninstalled for zones if currently only existing in the global zone.
For your needs using "smpatch update" should analyse, download and install dependant patches in order for patches specified on the command line or for a global update. Note that that is with the exception of patches not matching the currently defined patch policy such as those needing a reboot. See the smpatch man page for information on policies.
Patches requiring reboots or being installed in single user mode are primarily for kernel and driver patches.
Your problems installing the Sun Studio 11 patches have been encountered previously in regards to globally installed packages (and are covered in this forum) and is due to a combination of bug ID's 6337009, 6214678 and 6374972 for the patching utilities of which the last is still open.
You will currently have to manually install the patches using patchadd with the "-G" flag whilst in the global zone to install them in the global zone only.

HT1923 I have tried to remove and reinstall Itunes after they sent out the latest update. Fails to install. There is no way to go back to a previous version that works on windows 8.1

Apple's latest update to iTunes failed to install on my computer with Windows 8.1 64 bit. I have reinstalled in many times, removed Itunes via Control Pannel, etc. etc. No luck. Tried to go back to an older version, but all of the installs try to install the latest version. I suspect there is a problem with this update and vesion.

Solving MSVCR80 issue and Windows iTunes install issues.

Update is failing to install

Running on a MacBook, OS 10.5.7. Have Adobe Creative Suite 3 Design Premium (can’t bring myself to upgrade to CS4, yet $$).
I am trying to install the 13.0.1 Update for Adobe Illustrator CS3, but keep getting an error that “The update cannot be applied to the product”. I am trying to update from version 13.0.0 which I had to reinstall due to Update failing to install updates because of components being missing. The components where likely missing because they did not come over from backup (Time Machine) after installing a new hard drive.
Here are the last several lines from the Console log for the installer. I think it has the information needed to answer my question, but I don’t have a clue. I can dump more lines if needed, but I don’t know how many will be accepted here before my post starts to get truncated.
I hope this doesn’t mean that I have to wipe out CS3 and install from scratch.
2009-07-24 18:18:59.965 PatcherApplication[26536:913] Min OS-X version is not present in configuration file.
2009-07-24 18:18:59.966 PatcherApplication[26536:913] Key File Path list is not present in configuration file.
2009-07-24 18:18:59.966 PatcherApplication[26536:913] Key MD5 file is not present in configuration file.
2009-07-24 18:18:59.966 PatcherApplication[26536:913] Key MD5 file checksum is not present in configuration file.
2009-07-24 18:18:59.967 PatcherApplication[26536:913] BundleIdentifier is not present in configuration file.
2009-07-24 18:18:59.967 PatcherApplication[26536:913] Application ARDB Data name not present in configuration file.
2009-07-24 18:18:59.968 PatcherApplication[26536:913] Key Value Pairs are not present in configuration file.
2009-07-24 18:18:59.968 PatcherApplication[26536:913] Space required on OS Volume : 771696 KBs
2009-07-24 18:18:59.968 PatcherApplication[26536:913] Space required on App Volume : 192924 KBs
2009-07-24 18:18:59.969 PatcherApplication[26536:913] Install Anchor Service : false Given path : (null)
2009-07-24 18:18:59.969 PatcherApplication[26536:913] 1 == aumResult
2009-07-24 18:18:59.969 PatcherApplication[26536:913] Mode of Execution: AUM MODE
2009-07-24 18:18:59.983 PatcherApplication[26536:913] No entry for AdobeCode GUID (1) : {1CD4B20D-DBE0-46D9-8E99-A3A83E2C3897}
2009-07-24 18:18:59.984 PatcherApplication[26536:913] .................................................................
2009-07-24 18:18:59.984 PatcherApplication[26536:913] Found entry for AdobeCode GUID (2) : {C4519961-AC64-4565-B3AF-9050296B5D5A}
2009-07-24 18:18:59.985 PatcherApplication[26536:913] Install dir from CAPS: /Applications
2009-07-24 18:18:59.986 PatcherApplication[26536:913] Expanded [INSTALLDIR]/Adobe Illustrator CS3/Adobe Illustrator.app/Contents/Resources/AMT/application.xml to /Applications/Adobe Illustrator CS3/Adobe Illustrator.app/Contents/Resources/AMT/application.xml
2009-07-24 18:18:59.987 PatcherApplication[26536:913] Version check ...
2009-07-24 18:18:59.987 PatcherApplication[26536:913] Version Range: [ 13.0 , 13.0.1 )
2009-07-24 18:18:59.988 PatcherApplication[26536:913] Version of installed App: 13.0
2009-07-24 18:19:00.074 PatcherApplication[26536:913] Version from patch file: 13.0.2
2009-07-24 18:19:00.075 PatcherApplication[26536:913] Verifying from patch file:
2009-07-24 18:19:00.105 PatcherApplication[26536:913] The update cannot be applied to the product.
2009-07-24 18:19:00.106 PatcherApplication[26536:913] _reportUpdateFailed
2009-07-24 18:19:00.106 PatcherApplication[26536:913] 1 == aumResult

Wade_Zimmerman wrote:
In the applications/utilities/adobe installers select the add remove cs3 creative suites and run it to uninstall AI CS 3.
But first deactivate it.
Then reinstall.
Yes i would say this means the easiest way to fix this is probably reinstall since the updater does not think you have a legitimate copy of Illustrator running.
Even at that you might have to contact Customer Service if you have difficulty activating or running. if I were you I would reinstall the whole suite.
BTW knowing you have to activate your license to the Creative Suites to install on different computers would you not think that this would be a wise choice when installing on new hard drive?
I would keep this in mind for the future just a good safe policy and way to avoid trouble.
Creative Suite retained the activation, so that it not the issue - especially since the other applications (DW, PS, ID, etc) are not doing this. I'll try removing AI and then reinstalling. Now to the fun of making copied of my custom menu and settings. Happy happy joy joy.
As for deactivating prior to changing the hard drive, I can boot from the original hard (in an external enclosure now) so I could have deactivated that way if need be. I have enough experience with computers 20+ years to be wary of making changes prior to upgrading. I appreciate your time, but I didn't come here to be second guessed.

Photoshop CS6 update is failing to install

The Photoshop CS6 update (uisng the Adobe Application Manager) is failing to install. It download correctly but halp in the install it fails without any errors. What is the solution to fix this.
TIA

I'm having the same issue and your tech support told me that there is an issue with the update(s) and wireless connections. I switched to wired and the same issue exist. On the page from the link you posted, there is no update for Photoshop CC CS6 BUT the Adobe Application Manager AND "updates" within PS says that there is. I just signed up for CC 1 app but if you cannot support the end-user(s) any better than this I will cancel my membership.

Smpatch update ALERT: Failed to install patch 121616-02

I am getting various Failed to install patch alerts when doing smpatch update. Many patches are aparently applied successfuly, but others are not. I do not have Sun Support since it is my personal X86 box. Are other people getting these failures? If so, what is done to investigate / fix the problems? If I had support what would Sun recommend be done to correct the problem? Should smpatch always run clean with no errors? Regards.

I will post to the other forum as well, but I can't think of a more "general" Solaris discussion topic than how to / what to expect when applying patches. I am not sure I agree with your comment "it's best to only install the patches that are really needed". I thought smpatch update "decided" which patches are needed given the system it is run on.
Is your comment based upon best practices published somewhere? How do you as a sysAdmin decide which patches are really needed?
I would like to hear from the community how they patch their boxes and if smpatch is working for them, especially in a production environment. I have a stand alone system, but how are people in an environment with test systems patching? Are they using smpatch? In general, how are people keeping their systems updated, reliable, bug free and secure?
Regards,

Windows Update keeps failing to install 4 recommended KB;s

I have tried 6 times to get these updates to install: KB2515325,KB2522422,KB2492386,KB982018. every time Windows Update says it failed to install them. 2 other Updates KB2310138 and KB2467173 installed succesfully. How do i install/stop these updates as
everytime i reboot i get asked to install them again.
My System specs.
Windows 7 Ultimate
Q9650 cpu
2x 500Gb HDD's (SATA-AHCI)
Powercolor 4870 1GB
8Gb DDR2 1066
cheers
Who cares who wins

Seriously Microsoft?
Here's the thing, I received a call from my dear mom about this issue. She's not computer expert and never will be. She has no idea how to turn anything off from computer. But she's annoyed that she has to start up computer every
single time now twice because some one of Q&A fucked up. Your given solution is Invalid! Please come to solution what even 50 year old can do with out some sort understanding how to go ms config and disable startup programs and
run disk checks.
This update confusion makes me want go and buy my mom Apple, and then you guys have meetings on MS wondering why apple does so good. This is the reason. Everyone aren't computer wizards and rather overpay things on first day than pay
to some long haired WoW player every single time when MS Q&A fuck's up. This is second time in 30 days when I have to travel to my moms house ( 140 miles ) fix something what you guys fucked up.
Next time I send you a bill and you can debate abut it in EU highest court.
Wow, that's pretty harsh, Taavi. You seem to have a pretty narrow-minded idea of how many
hundred of thousands of different configurations Microsoft has to support with a single, unified update system. Go get your mom an Apple - see how that works out for you. Something tells me you haven't
bitched or moaned about the hundreds of other updates that DID seamlessly, automatically and silently install - but now you're all venom and hate towards Microsoft for missing a small detail somewhere in in a massive list of possible configurations.
You might try using RDP or some other readily available tool to allow remote access to the box without having to drive 140 miles to dear mom's house. That's how I take care of my parent's machines, and it's worked well for me. Then again, I like
seeing my parents - any chance I get, and I generally get a home cooked meal out of the deal.
If you can stop acting like a douche bag long enough to actually try and troubleshoot the problem, you likely would have figured out of to solve this issue yourself. You're one of those kinds of people who LOVE to Bandwagon-bash Microsoft
when it's convenient for you, but the rest of the time you silently LOVE to use their products.
Whatever you do, don't give Microsoft any credit for their successes - that bitter pill just might drive you over the edge.
Flames aside, here's what I did to get these particular updates to install. It seems that KB2515325 is the hinge that's making or breaking these installs from working one-after-another. I installed all the updates I could, did a reboot, and was
left with the 4 KB's mentioned. I didn't download the standalone updates, either - I used Windows Update. Here's what I did to get them all to install on my 64-Bit system:
Install KB2492386 by itself - unselect all other updates
Reboot
Install KB2515325 by itself - unselect all other updates
Reboot
Install KB2522422 by itself - unselect all other updates. I was not asked to reboot after this update.
Check for updates again, and you should only have KB982018 left. Install KB982018.
Reboot one last time, then everything will hopefully have taken.
If that works for you, Taavi, be sure and give me your address so I can send
you a bill for providing you step-by-step instructions.
SonarTech

10.4.5 Update Package fails to install

Similar Messages

Maybe you are looking for