10.4.6, airport & macsense aerocard extreme WPE-800

We have been using a Macsense AeroCard extreme since Nov 05. We have airport extreme and haven't had any problems until today. We installed 10.4.6 this morning and now the aerocard extreme won't power on and airport shows up as off. This card is practically brand new. I checked the Macsense website and there aren't any new drivers. Actually, they don't even make metion of this card but mention WPE-600 & 700. Anyone else having this issue? Any suggestions on how we can fix it?
Thanks in advance!
Kim
PowerBook G4 Titanium 400mhz 768mb RAM Mac OS X (10.4.6) 100gb hard drive

bump, still need help! Anyone out there having similar issues?

Similar Messages

I have an old Airport Express I want to use to extend WiFI (which is best Airport Express or Extreme) and to have a HD for storing Itunes connected to the old Airport as well. I would also like to have the new Airport hardwired to my Mac (desktop)

I am willing to buy a new Airport Express or Extreme so I can get at least one LAN port - but only if I can use that LAN port to connect to my MAC (desktop) so it doenst have to get internet via the WiFi- AND so I can set it up as its own hot spot. I think I saw that was possible?? That way my guest network would be separate from my home Network. Just trying to get the best layout. I have cable modem to old Airport now and USB from it to printer.
Maybe a new Airport - again USB to printer and LAN to MAC(?) then old Airport elsewhere in the house to extend the signal and use USB off it to hard drive to store Itunes? Would LOVE to have it there to use for Airplay etc- Is that possible- I have read many comments and still not sure if it is possible or not.
Baxically I need a simple solution to storing all my photos- music and movies (MAC only has 500GB) AND have a great back up; Currently have a 1TB drive as Time Machine - so could use that for back up- but running out of space on MAC for all the media I am saving. THANKS!!

You are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
An Extreme's Guest network is separate from its Main network; that is the reason for having it.

WHICH IS BETTER AS A BUSINESS TRAVELER-AIRPORT EXPRESS OR EXTREME

Can someone please advise me as a business traveler since this is my first Mac in many, many years whether the Airport Express or Extreme would be the "best fit" for me?
I'm assuming Express would be the idea situation....thanks!

Hmmm. To be honest, I don't see how this would help you at an airport. They are all using wireless for public use. You simply locate the wireless network with your computer and log on (and pay the fees via your credit card unless its a free service).
Power wise, you would need an AC outlet to plug the Express in. Those are sometimes difficult to find as well at the airport. But again, having an AirPort Express around when a wireless network is already available would not benefit you in any way.

Hi, I'm thinking of buying the Airport Express or Extreme for my school dormitory, would i need to plug them into the already existing school internet via LAN cable or do the products just work by themselves?

Hi, I'm thinking of buying the Airport Express or Extreme for my school dormitory, would i need to plug them into the already existing school internet via LAN cable or do the products just work by themselves?

Welcome to Apple Support Communities
AirPort stations aren't modems, so they have to be connected to the modem you are already using. The AirPort Extreme and Express have a WAN port, where you have to plug an Ethernet cable that has to be connected to the modem.
After doing this, you can set up the AirPort station by using AirPort Utility. If you have Windows, download AirPort Utility from the Apple website > http://support.apple.com/kb/dl1547

AirPrint via Airport Express or Extreme

Any plans for AirPrint support for printers connected via Airport Express or Extreme ?

Hello. Here is a solution without the need of a main computer...
http://www.amazon.com/Lantronix-xPrintServer-Home-Printing-XPS1002HM-01-S/dp/B00 8KCSPRK/ref=sr_1_1?s=pc&ie=UTF8&qid=1365001962&sr=1-1
I got one my self. It works.

Differences between AirPort Express and Extreme?

What are they differences between AirPort Express and Extreme?

You can find all the differences between the AirPort Express and Extreme in this website > http://www.apple.com/compare-wifi-models/

Problems with Airport Express and Extreme

I have tried to set up Airport Express and Extreme. Both proceeded normally in the Air Port Utility until the final stages. Then it said it couldn't find the devices. When I tried again (many times), I couldn't even start the process, even though it did that the first time for both. I'm stumped.

To set up the 802.11n AirPort Extreme Base Station (AEBSn) as a bridge, either connect to the AEBSn's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN port of the AEBSn, and then, using the AirPort Utility, make these settings:
AirPort Utility > Select the AEBSn > Manual Setup > Internet > Internet Connection tab
Connection Sharing: Off (Bridge Mode)
Click Update to apply the new settings
AirPort Express Base Station (AX) - iTunes Setup
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <existing AEBSn's wireless network>
Wireless Security: <select the encryption type of the existing wireless network>
Wireless Password: <enter the existing wireless network password>
Verify Password: <re-enter the existing wireless network password>
AirPort Utility > Select the AX > Manual Setup >Music
Enable AirPlay (checked)
iTunes Speaker Name: <enter desired speaker name>
iTunes Speaker Password: (optional)
Verify Password: (optional)
Click Update to write the new settings to the AX

Any software differences between new airport express and extreme?

I was wondering if there are any features or configuration differences between the two, such as configuring VPN passthrough.
The only difference I can see is using the USB for hard drive use.
Also, do you think the performance will be similar. I know the time capsule actually rated slower than the extreme even though they use similar hardware.

You can find all the differences between the AirPort Express and Extreme in this website > http://www.apple.com/compare-wifi-models/

Lacie 2TB Big Disk Extreme Firewire 800 firewire 400 hi-speed usb2 7200 rpm sku 301201u knocked

I have a Lacie 2TB Big Disk Extreme + Firewire 800 firewire 400 hi-speed usb2 7200 rpm sku 301201u , which I have been using with an emac ( 1ghz power pc 4 , macos 10.5.8 ) for past few years.
A couple of days ago The drive was hit rather hard on side while on and up , the computer hung as the computer was up on a mac os 10.5.8 partition on this drive . Computer was rebooted and comes up on internal drive, lacie drive just made beep and click sounds ( i am actually deaf and this was what I was told ) every couple of seconds. Attempt was made to boot on CD to use latest available disk utility ( Macos 10.5). Lacie still does not show up. 15-20 minutes into this, I powered lacie down. This is when I started noticing a burned circuitry smell.I powered lacie down and disconnected it at this point.
Most Folks just suggest data recovery which can cost as much as $3000 or more which I really don't have .
I figured I open and examine the internalsof drive . I did so. The circuitry smells
like burned near the point where power comes in and the death diode is located, otherwise circuitry looks fine. One of the two drives , when taken out did not have a burnt smell and the other had a burnt smell towards the center but it dissipated in about an hour after it was taken out. There also was one loose screw inside drives chasing which ended up being one of the 4 screws that holds the disk drive's circuitry. I dont know but I don't think this could have shorted anything out but even though slim it is possible that such happened.
While I have Three DC voltmeters, I could not find the one that would accurately measure the voltage on the external power suppy to see if the output voltage on the 4 pins is accurate . I am still looking for the one meter that can do this.
I figured if I can find the exact drive in like new condition and swap the disks, if the disks are not damaged and if the culprit is actually burnt circuitry, then the drives should come up as they were as though nothing had happened.
I talked to a friend that suggested getting other cases and swapping disks but I guess that is not possible because the two disks are raided? ( raid 0 ) . I am also not even sure if the drives are raided the way they were put into use ( only through firewire 400) as the documentation suggests that only firewire 800 denotes use of built in raid0 but I am not sure. So again assumption is made that the drives are raided .
I contacted dealership of the drive which again suggest that Unfortunately it is not possible to obtain another drive like this one because it has been obsolete and out of manufacture for a long time. It is also a risky idea because if the problem is not with the drive enclosure hardware, there is a genuine risk of making the recovery process more difficult, or impossible.
This though does not follow logically. I have been able to see the exact drive with the same sku number offered as new or excellent condition more than 1/2 dozen times in the past few weeks so I guess drive can be acquired and tested before any such swap. If drives are not the culprit , I figure after a swap with a new enclosure and everything other than drives, the thing should not even be noticed and all should work as they did before the accident. If the drives are the cause , then the thing has been on 1/2 hour after the accident so the swap should not do any more damage or cause future recovery attempts any more issues than already might be there.
Any sound advice is greatly appreciated.

I tried the two good disks in the main chasis with new cables and power supply , and I could not get them to come on or show.
I put the good disks back in the second chasis with new cable and power suppy and it again shows ( prompts telling you that it sees a readable MAc OS disk and asks if you want to Initialize it ).
I put the first set together again with new cable and power supply and the light does not come on anymore . being hearing impaired , i put my head on the drive and hear this clicking sound every one or two seconds. The fan operates . The drive does not show when rebooting and it does not show on the disk utility. The drive does not smoke but smell of burned mica ( circuitry ) is still in my throat after a couple of hours.
From what I have learned the possibility exists that each drive is calibrated and the calibration is added to the control board , So like chances are that even if the two original drives are good and connected properly and everything else is good, they might and probably just wont work with a control board of another even exact drive. There are three tables / charts marked on each drive and specific locations marked on each chart which differ between drives . These I think are from calibrating the drives.
So I guess its data recovery...
Lacie Data Recovery wants $600 ( $300 x 2 drives ) if they recover data without need for a clean room , $3000 ( $1500 x 2 drives ) if there is need for clean room. If they don't recover , you dont pay , if they recover and you do not want to pay, then they just send you the damaged disk ( or perhaps keep it , or smash it then return it to you) .
There are many other data recovery services so I guess a few days to sift through them but I guess the maker reference should be the best way ( I think its actually a sub-company that lacie forwards data recovery to.
Too many factors are involved. One that will such be a secure thing to do or 6 months later you find out that someone opened 10 accounts under your name , or emptied your bank account ( thats actually not a problem because there is almost never any money in my bank account) . So security is a concern. I have encountered individuals that make it their business stealing peoples stuff from their disks. Once I even had one Tech guy which was refered to solve a problem I had , copying disks contents right in front of me for absolutely no reason. So I ask him what are you doing, and he says , I am copying everything just to make sure they are safe ( : ) )
Then there is the dalai lama , everything happens for a reason scenario. In which case I guess I have to consider the whole thing as Good Omen. and just forget about it and go on with my life ( maybe I go work in Mc Donalds : ) )
The bottom line is I can't believe that I am such an idiot not to have a proper backup system in place .
Thank you for the links, I will check them out.

How do I use my airport time capsule extreme as a external hard drive

How do I access files and save files to my airport time capsule like its an external HD. How do I access the external HD that is connected to the time capsule?Ai

The TC is no different to any other network drive... you mount the drive and copy the files to it.. or copy files from it.
Same with USB drive plugged into the TC.
BUT.. TC is not suitable for live files.. ie files you are actively editing and working on. It is storage.. not working disk space.. and the USB drive more so.. it is slow.. much slower than same USB plugged into the computer by at least half.
And USB 2 wasn't that quick to begin with. The TC itself is slow.. although over wireless it is actually wireless that is the hold up.
Here is what I normally say for this question. It is asked every day.. often several times.
Store files on the TC.
https://discussions.apple.com/message/24380694#24380694
This is asked several times a day.. obviously people are struggling with their latest SSD being too small.
The TC is not suitable for network file server.. but many people having no choice press it into service as such.
It cannot be partitioned. It was and is and ever shall be a backup device for Time Machine.
Major issues.
1. No backup.. no way Time Machine can backup a network drive. No place to backup to.. So all your files will be at risk. And you will need to buy a third party like CCC to do backup. You will also need a USB drive somewhere else in the network to act as target for backups.. and if you use the TC itself over wireless you will experience a new definition of pain and suffering.. slow.. extremely slow..
(cf Belly of the sarlacc http://starwars.wikia.com/wiki/Sarlacc)
2. The TC cannot be partitioned and mixing TM backups and data is not great.
3. The drive is slow to spin up and quick to spin down.. there is no controls.
4. iPhoto in particular can easily corrupt its entire library with wireless networking causing a disconnection to one photo. Even if you do this;;; do not move your photo library... you have been warned!!
5. iTunes will constantly lose connection to the library. The disk is too slow to respond.. itunes on the computer will constantly spit out errors. Even in the midst of streaming the TC can spin down the disk due to caching.
6. Do not use any live files on the TC no matter what else you do.. if you edit files in whatever program the file must be on the local hard disk.
7. The only suitable location for most libraries is a computer. You can plug in an external hard disk.
Read pondini for some work arounds.
Q3 here. http://pondini.org/TM/Time_Capsule.html

Airport express or extreme for home wireless network

My Mac Pro is hooked up to my internet upstairs. I would like to hook-up my sony bravia to the internet through a wireless bridge. Do I need the express or extreme? My PS3 is already hooked up to my mac pro through internet sharing. What is the best way to set up an internet connection for my tv and PS3?

joek1 wrote:
My Mac Pro is hooked up to my internet upstairs. I would like to hook-up my sony bravia to the internet through a wireless bridge. Do I need the express or extreme? My PS3 is already hooked up to my mac pro through internet sharing. What is the best way to set up an internet connection for my tv and PS3?
an airport extreme base station has 3 LAN ports ...

Panasonic BL-C131 wireless doesn't work with Airport Express and Extreme

I have Airport Express to create a wireless network, and an Airport Extreme to extend the wireless network. When I connect the LAN cable on Extreme and the Panasonic BL-C131, the camera can successfully detect IP and work fine. However, when I remove the cable and switch the camera to wireless mode, it can never detect the IP. I've read somewhere in the camera manual that it needs a UPnP enabled router to have wireless work. I am wondering if there is any way to confirm, since I know Airport only support Bonjour.
I really like to keep the Airport at home, or I'll need to replace it with a D-link router.

Issue solved

Weird semi-loss of AirPort Express and Extreme

I have an odd symptom where, when I launch iTunes, my AirPort Express is sometimes listed is not available from my Power Mac G% (running 10.4.8).
When I launch AirPort Admin Utility, NONE OF MY AIRPORTS (either Extreme or Express) are listed. Rescanning or selecting Other does not solve this.
What is odd is (1) The AirPort menu still shows me connected to my AirPort network and indeed I still have Web access etc. and (2) If I launch AirPort Admin Utility from my MacBook Pro, it shows all the AirPorts correctly (so the problem seems limited to my G5 rather than the AirPort devices).
If I restart my Power Mac G5, the problem goes away and all works well again- for a day or so - and then it returns.
What can I do to permanently eliminate this annoying symptom?

1.) Since the Airport Express is extending the Extreme Network, will my whole network now be single radio only network, since the Express only has one radio?
Although, your AirPort Express is 802.11n, it is not simultaneous dual-band. That means it can either extend the AirPort Extreme Base Station (AEBSn) 2.4 GHz or 5 GHz radio but not both at the same time. So the AEBSn will still be broadcasting on both the 5 GHz (for 802.11a/n) and on 2.4 GHz (for 802.11b/g/n).
2.) What if both an 802.11g and 802.11n device connect to the Express' radio instead of the Extreme's for some reason, will this make both devices operate at 2.4GHz?
Yes.
3.) What if an 802.11g device connects to the Airport Express' radio. Since this is now 2.4GHz, will it only now communicate with the Airport Extreme at 2.4GHz?
Assuming that you configured the AXn to extend the AEBSn's 2.4 GHz radio, it will only be able to communicate back to the AEBSn on its 2.4 GHz radio.

Itunes remote speaker using Airport Express and Extreme

I have purchased an Airport Extreme and Airport Express, so I can listen Itunes music on my stereo system. For some reason, there is simply no remote speaker selection button on the bottom right of the Itunes windows. Does it has to do with the fact that I am using an old Mac OS X?
My Macmini has no airport card, so I connected the ethernet to the Airport extreme, and plugged the Airport express few feet from the base. Nothing but an orange tilting light comes out of the little box. I can surf the net perfectly but the Itunes is ignoring all my investment on the couple of Airport boxes i purchase...What I am doing wrong?

Yes, I thought that purchasing the Airport extreme as
the ethernet interfase directly connected to the
MacMini, was almost the same as having the airport
card inside the Mini. Where did I get lost?? I have
the extreme directly to the mini, and an express
plugged somewhere close and nothing happens...
The problem is that the mini can only stream iTunes to an Airport Express via Airport. While you have connected it to an Airport basestation, as far as the mini is concerned, it is working via ethernet because that's how the data is leaving the system. It doesn't have an Airport card, thus it can't stream iTunes content to an Airport Express.

Airport Express or Extreme Card?

I have an airport extreme base station with cable modem for my ibook. I now have a second hand computer - (imac 10.2.8) and would like to connect it. I haven't a clue which I should get so I can have the internet on both.

kandushka, Welcome to the discussion area!
There is no AirPort Express card.
If your iMac is:
an iMac G3 CRT with a clock speed of 400 MHz or faster, it has an internal slot for the original AirPort card. The AirPort card adapter is also required to use the card in an iMac G3. The AirPort Extreme card is NOT compatible.
an iMac G3 CRT Blueberry with a clock speed of 350 MHz, it has an internal slot for the original AirPort card. The AirPort card adapter is also required to use the card in an iMac G3. The AirPort Extreme card is NOT compatible.
an iMac G4 with a clock speed of 700 or 800 MHz, it has an internal slot for the original AirPort card. The AirPort Extreme card is NOT compatible.
an iMac G4 with a clock speed of 1 GHz or higher, it has an internal slot for the AirPort Extreme card. The original AirPort card is NOT compatible.
an iMac G5 and does not have built-in wireless, it has an internal slot for the AirPort Extreme card. The original AirPort card is NOT compatible.

10.4.6, airport & macsense aerocard extreme WPE-800

Similar Messages

Maybe you are looking for