10.4.6 failed installation, but successful?

During all attempted installations of 10.4.6 (both the Software Update downloaded package and the Combo package), installation has failed.
The installer fails with such wonderful error messages such as the following:
brackenridge% sudo installer -verbose -pkg MacOSXUpdCombo10.4.6PPC.pkg -target /Volumes/Misato/
installer: Package name is Mac OS X Update Combined (PowerPC)
installer: Installing onto volume mounted at /.
installer: Preparing for installation.....
installer: Preparing the Disk.....
installer: Preparing Target Volume
installer: Preparing Mac OS X Update Combined (PowerPC).....
installer: Running Mac OS X Update Combined (PowerPC) Installer script
installer: Installing Mac OS X Update Combined (PowerPC).....
installer:
installer: Configuring Installation
installer: Writing files
installer: Writing files: 0% Completed
installer: Writing files: 58% Completed
installer: The install failed.
Installation of the package downloaded during Software Update (and moved to the Trash) fails at 33%.
Wierd thing is, now my system is reporting as 10.4.6. I'm worried, now, that my system has convinced itself that it is 10.4.6 (which explains why the update is no longer available through the Software Update tool) but that all the files distributed in this update were not touched. Ideas?

Thanks for the suggestion of Whatsize. It didn't reveal any invisible folders with my data inside.
Whatsize from <http://www.id-design.com/software/whatsize/> is intriguing in showing how much garbage is on the HD. It was surprising to see caches that I thought had been deleted were still on the disk.
I am currently back to 95% of files restored from other sources and i'm recovering my distributed assets from the net.
g3 b/W 400 Tower Mac OS X (10.4.5) webserver.com.au
g3 b/W 400 Tower Mac OS X (10.4.5) webserver.com.au

Similar Messages

Failed installation but space available going down. How do I delete files?

Hey I bought Sims 3 a few months back when I was using OSX 10.5 and then I upgraded to Snow Leopard when it came out and now I need to reinstall the game. I have tried about 5 times and each time the install stops working (gets to copying file x of y and doesn't move past this point). Unfortunately now it's gotten to the point where I only have 2.8GB free space on my HDD. I can't find any sims or EA files on my HDD so I can't delete them. Any suggestions would be greatly appreciated.
Model Name: MacBook
Model Identifier: MacBook4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.1 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: MB41.00C1.B00

Only once you know where that information is located, which we don't and EA does. Someone on these boards may happen to know, but even if they do, you've still got a failing installer to troubleshoot, and again, EA knows their installer best.

Mac shockwave installation says successful but there's no shockwave folder and adobe site says not installed

Macbook Pro (Retina, 13-inch, mid-2014)
OS X Yosemite 10.10.1
3 GHz i7
64-bit* (based on table found in archived Apple support article that appears as first link in google search)
16 GB 1600 MHz DDR3 | Activity monitor says "Used: 9.58 GB (apps: 6, file cache: 2, wired: 1)"
78 GB remaining of 120 GB flash storage
One hard disk, no external
2 admin user accounts and guest account, second admin logged out
*Sorry for saying stuff you already know. I just don't know what you don't and want to be complete.
I arrive at adobe shockwave page, which correctly detects Mac computer, chrome browser. (Did that about 4 or 5 times)
I click download. (After first failed attempt, I'd start by ejecting install disk thing and put previous dmg file in trash)
DMG file arrives in download folder.
I open it.
I double click on the first of the two files: Shockwave_Installer_Full_64bit (other file is uninstall | Is yosemite operating system actually 32 bit??)
I close my browsers.
I click the "Next" buttons and agree to the thing
I type my administrator password for this administrator account
I manually choose Macintosh HD for the install location (1 time)
I go with the default option and verify that all users will have access (2 times)
I go with the default option for install location (rest of times)
It tells me what it's doing while progress bar fills and empties and repeats. Says stuff like "Moving files" "Working directory" or something, as it should.
My mac makes the install noise.
The install window says ~"Adobe Shockwave Player installed successfully"
I restart (only on one or two attempt(s))
I reopen browser, which reopens last pages
One of those pages is the chrome://plugins that an Adobe troubleshooting page told me to check.
I refresh it. There's no shockwave player. There is adobe flash player and it says "(2 files)" and version 16...
I go to the adobe page where I can click "Check now" to see whether my computer has shockwave.
Page confirms I do not have it by saying: "Sorry, Shockwave Player is either not installed or disabled on your machine."
Per some Adobe troubleshooting instructions, I prepare to repeat the process by searching for folder to delete it so that I can properly reinstall it (3 times)
There is no folder when I use finder to search "This Mac" or "All my Files"
I come to forum. I guess I will now try the really involved stuff about disabling login items and installing via a new user. I came here before trying it because the page said that those are ways to work around problems that may cause the installation to fail. But the installation window said it was successful. Did it go to the cloud?????? Did my computer auto-scrub for some reason unrelated to anything I did deliberately??
UPDATE: Tried the shift-key-during-restart-and-using-new-user but it didn't seem to make a difference.
UPDATE: I did, however, during that process, find that when I use that page in Safari to check installation, it says the latest version is installed. So maybe my question just got a lot simpler. Is this a Chrome problem beyond my own system and I just have to wait for Google to sort it out? Is Chrome somehow incompatible with Shockwave? According to a website I've been trying to use (via chrome) to complete class homework, I am missing shockwave and need it.
(2015.01.16)

Ok, I'm stupid.
Found another thread about this and typing 'install OS X Lion' in spotlight did the job.
https://discussions.apple.com/message/15670460#15670460
excusez-moi

Installation was successfully but cant start the portal

Hi
I download the SAP Portal 7 trial version and installed it in typical option on Win XP. During the install it was asked to put the master password. The installation was successfully finished. Trying to start the server from the administration console it was asked to authenticate (put the username and password.) After typing of the credential data I get in a message box: "invalid credential, start failed: 2" and the start of the server fail. I retyped and even reinstall the Portal two times to be sure that I do not make a mistake but each time I get the same error!
I installed it later again and choosed custom installation option and step by step, put all necessary passwords and installation was successfully. But the result was the same and I get the error again!
Please help to to get the portal a start

Hm..ok Shadmehr,
Last try below I head for bedtime and need to getup early for fishing tomorrow
Checkout the below resolved thread (talks about master password=SDM password).
problem with sneak preview edition
Hope that can help you get started !! Award points for helpful suggestions and nic weekend.
Ray
Edited by: Raymond HENG on Oct 11, 2008 12:12 AM

ERROR: DW006: Apple Package failed to install successfully. ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1

Hi,
i have the following message when i tried to install LR 5.6
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DW006 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe Photoshop Lightroom 5.pkg_5.6 -----------
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1
how can i solve this issue?
I am running on Mac with OSX 10.9.4
thanks in advance
Olivier

olebreth wrote:
how can i solve this issue?
A search of the site would probably be a good start:
https://forums.adobe.com/search.jspa?q=dw006

ERROR: DW006: Apple Package failed to install successfully. ERROR: Third party payload installer Adobe Acrobat XI Pro Installer.pkg failed with exit code: 1

Hi All, anyone with this problem with Acrobat Pro XI, IM USING MAC, also Yosemite if that helps.
Also Adobe CC, BASICALLY IT just quit and i had to uninstall, re install, and I get this
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Acrobat XI Pro Installer.pkg failed with exit code: 1
Anyone with same issues...

Same problem. Creative Cloud subscriber running Mac 10.10.2 on iMac (Retina 5K, 27-inch, Late 2014). All apps work fine EXCEPT for Adobe Acrobat XI. I have tried 100 times and 100 solutions. NOTHING works.

BlackBerry Desktop Software installs but then fails to open

Purchased BlackBerry today.
BlackBerry Desktop Software installs from distribution disc but then fails to open. Can see it in Windows Task Manager>Processes, as follows:
Windows Task Manager>Processes
Image Name: DesktopMge.exe CPU: 00 Mem Usage: 7,764 K
Windows Task Manager>Applications
Not listed!
I UNISTALLED previous installation of BlackBerry Desktop Software, including user settings.
Downloaded and installed the installation file for BlackBerry Desktop Software version 4.7, “470_b050_english.exe”, but with same result. Uninstalled it, too.
As suggest elsewhere in this forum, I made directory as follows: C:\INSTALL\Blackberry
Then extracted the downloaded installation file for BlackBerry Desktop Software version 4.7, “470_b050_english.exe”, into it.
Then started installation by clicking on “BlackBerrySetup.exe”.
However, the result is the same, as described above. BlackBerry Desktop Software installs but then fails to open.
Any help would be appreciated. I would like to make this software work.
Is there alternative software available?
Solved!
Go to Solution.

http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...
HOWTO : use your blackberry as a USB device
and then install the Desktop Manager as administrator.
and use it as administrator too.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

After installing itunes 10 installation was successful but then tells me error 2 (windows error 2), After installing itunes 10 installation was successful but then tells me error 2 (windows error 2)

After installing itunes 10 installation was successful but then tells me error 2 (windows error 2).

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

I downloaded the Newest version of Adobe Air. It said the Installation was Successful but it wasn't

I downloaded the Newest version of Adobe Air. It said the Installation was Successful but everytime I try to open up a file with it, it tells me to run Adobe air again as if Im trying to download it again. Please Help!

Hi,
I am on annual leave and will be back on Nov 8th 2011.In case of any urgent ,please get in touch with your respective IT person and details given below.
For GT/MT :Mr.Manish (09004356284)& Akshay (09987712384)
For BA :Mr.Vasantha Kumar (09987631333)
For Foods/ICD :Mr.Vishal (09987937513)
Any other query please get in touch with Mr.Vijay varshney (9987631300).
Thanks
Surendran

Error '"Shockwave Flash", but the plug-in failed to load successfully

Hi, some help please. I'm not very technical on macs so I need somebody to help with as much detail as possible. I use the browser Safari 1.3.2 but it will no longer display flash content, instead I get the lego box with a question mark in it and the error message '...“Shockwave Flash”, but the plug-in failed to load successfully'. I've checked some discussion threads but they are beyond my realm of comprehension - I am but a simple man in need of help. Please help. Please. Somebody...

Hi neonhook,
First of all, Welcome to the  Discussion forums!
"I am but a simple man in need of help."
Trust me, there are a lot of us around here like that
If possible, I would suggest using a different browser such as Camino 1.6.4 or even Firefox 2.0.0.x (but keep in mind that Firefox 2.0.0.x will only be supported fully using 10.3.9 until mid-December 2008 and Firefox 3.0 is for OS 10.4 and above only.
Both Camino and Firefox can be customized to look and feel a lot like Safari and have many features that Safari 1.3.2 does not. I use Camino and find it faster and with no crashes due to flash web content etc. You'll be able to use sites such as Google Maps again, etc.
Safari for 10.3.9 is no longer being supported and to use a newer version of Safari you would need to upgrade your OS to at least 10.4 and above.
hope that helps some and post back with comments and questions,
littleshoulders
PS. Please post back if any of the above information is too confusing as I do understand it can be.

Installed update for Quicktime for Leopard. It indicates successful installation but actually hasnt installed. Did it a few times and also deleted my existing version and all QT preferences. Still doesnt work. any ideas?

I have downloaded Quicktime for leopard fo rmy iMac (2 years old). It indicated successful installation. Then I purchased Quicktime Pro. It didnt work. So tried a download again. The same thing happened. So I deleted absolutely everything including my old version of QT and also any preference files I found. I tried again but the same thing happened. It indicates successful installation but a search doesn't reveal anything anywhere. I have had no previous trouble downloading any new programmes . They always install with no problem straight into applications. there is lots of available memory. Now I have no Quicktime whatsoever.
Any ideas anyone? Have tried speaking to the apple call centre in India. He couldnt understand me and vie versa. No use at all and it cost me a fortune for the phone call. On the phone for an hour while this chap kept going to his supervisor. Why do companies continue to use call centres overseas?

I have used Firefox since Firefox 0.7 or 0.9 but may have been 0.5. Seems like it was called something else but my memory is not that great.
Before that I used Seamonkey and other variations of Mozilla. Before that I used Netscape. I even have/had a CD that I sent off for with the different releases going all the way back to the beginning (I think).
I was a Mozilla crusader. When I saw someone using IE I would talk to them like they must be dumb until they switched haha. I have converted everyone who is close to me to firefox except my wife and I think she uses IE to irritate me.
I work on the Internet. I spend no less than 12 hours and up to 18 hours a day with my fingers touching a keyboard that is connected to a computer or phone that is interacting with the Internet. I have Firefox on my Android phone, two laptops and my desktop. All of them crash constantly.
When it crashes I lose work and time. Not to mention getting big headaches.
I am very appreciative for the browser and yes I have made money donations. Not saying that makes me good. I look at it more like I am paying for great software.
I never thought the day would come that I would say no more to Firefox. The day has come.
When Firefox first came out it was small, good and fast. As time has went on it has become big, bad and slow. I feel like I am turning my back on a good friend but i can't take the crashing any longer.
I am using Chrome now. Dang I hate to use anything google. Since I can't make my own browser I have to use what's out there and Chrome is fast. Sort of like Firefox used to be... except of course Chrome has all those phone home goodies.
I won't be trying to convert anyone to Chrome but neither will I try to convert them to Firefox.
I am not trying to start a flame war or anything here. As nuts as it sounds I felt like I should tell Firefox bye.
Bye bye Firefox. it was good knowing you

CD-ROM works for installer but disappears on boot

I'm having a strange issue. I got a Lenovo IdeaPad yesterday and promptly wiped vista off and installed Arch.
The install went swimmingly, but for some strange reason, the cdrom drive is not detected when I boot into Arch. I installed Arch from the CD and the device was /dev/sr0 during the installation but /dev/cdrom, /dev/dvd nor /dev/sr0 exist. I'm really confused as to why it worked during the install, but not when I booted off of my hard drive. I've updated all my packages and upgraded to to the newest kernel.
Also, the BIOS had two ATA settings: AHCI and "compatibility". I've tried both settings and tried reinstalling with both settings, but they don't appear to make a difference.
Here is some debug information:
output of lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc Unknown device 9581
01:00.1 Audio device: ATI Technologies Inc RV630 audio device [Radeon HD 2600 Series]
02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
04:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection (rev 61)
0e:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
0e:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
0e:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
0e:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
0e:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
Output of lsdev
Device DMA IRQ I/O Ports
0000:00:1a.0 1800-181f
0000:00:1a.1 1820-183f
0000:00:1d.0 1840-185f
0000:00:1d.1 1860-187f
0000:00:1d.2 1880-189f
0000:00:1f.1 0170-0177 01f0-01f7 0376-0376 03f6-03f6 18a0-18af
0000:00:1f.2 18c8-18cb 18cc-18cf 18d0-18df 18e0-18ef 18f0-18f7 18f8-18ff
0000:00:1f.3 1c00-1c1f
0000:01:00.0 2000-20ff
acpi 9
ACPI 1000-1003 1004-1005 1008-100b 1010-1015 1020-1020 1028-102f
cascade 4
dma 0080-008f
dma1 0000-001f
dma2 00c0-00df
fglrx 16
fpu 00f0-00ff
i801_smbus 1c00-1c1f
i8042 1 12
Intel 17 22
keyboard 0060-006f
libata 14 15 0170-0177 01f0-01f7 0376-0376 03f6-03f6 18a0-18af 18c8-18cb 18cc-18cf 18e0-18ef 18f0-18f7 18f8-18ff
PCI 0cf8-0cff 2000-2fff 3000-3fff
pic1 0020-0021
pic2 00a0-00a1
rtc0 8 0070-0077
sdhci:slot0 18
timer 0
timer0 0040-0043
timer1 0050-0053
uhci_hcd 1800-181f 1820-183f 1840-185f 1860-187f 1880-189f
uhci_hcd:usb4 21
uhci_hcd:usb5 20
uhci_hcd:usb6 19
vga+ 03c0-03df
Some lines from my /var/log/messages.log
Jan 31 23:49:35 l1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
Jan 31 23:49:35 l1 scsi0 : ata_piix
Jan 31 23:49:35 l1 scsi1 : ata_piix
Jan 31 23:49:35 l1 ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118a0 irq 14
Jan 31 23:49:35 l1 ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118a8 irq 15
Jan 31 23:49:35 l1 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Jan 31 23:49:35 l1 ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 18 (level, low) -> IRQ 18
Jan 31 23:49:35 l1 scsi2 : ata_piix
Jan 31 23:49:35 l1 scsi3 : ata_piix
Jan 31 23:49:35 l1 ata3: SATA max UDMA/133 cmd 0x000118f8 ctl 0x000118ce bmdma 0x000118e0 irq 18
Jan 31 23:49:35 l1 ata4: SATA max UDMA/133 cmd 0x000118f0 ctl 0x000118ca bmdma 0x000118e8 irq 18
Jan 31 23:49:35 l1 ata3.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC31P, max UDMA/133
Jan 31 23:49:35 l1 ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Jan 31 23:49:35 l1 ata3.00: configured for UDMA/133
Jan 31 23:49:35 l1 scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
I believe that the Hitachi is my hard drive. I didn't see the cdrom there.
I'm not sure if this will help but here is the contents of /dev/disk:
by-id by-path by-uuid
./by-id:
ata-Hitachi_HTS542525K9SA00_071120BB0F00WDGV9W5C ata-Hitachi_HTS542525K9SA00_071120BB0F00WDGV9W5C-part3 scsi-SATA_Hitachi_HTS5425071120BB0F00WDGV9W5C-part2
ata-Hitachi_HTS542525K9SA00_071120BB0F00WDGV9W5C-part1 scsi-SATA_Hitachi_HTS5425071120BB0F00WDGV9W5C scsi-SATA_Hitachi_HTS5425071120BB0F00WDGV9W5C-part3
ata-Hitachi_HTS542525K9SA00_071120BB0F00WDGV9W5C-part2 scsi-SATA_Hitachi_HTS5425071120BB0F00WDGV9W5C-part1
./by-path:
pci-0000:00:1f.2-scsi-0:0:0:0 pci-0000:00:1f.2-scsi-0:0:0:0-part1 pci-0000:00:1f.2-scsi-0:0:0:0-part2 pci-0000:00:1f.2-scsi-0:0:0:0-part3
./by-uuid:
1D1C-0A10 7b41b7c8-2843-457e-98a3-95b3226b2faf f63ca591-8d71-4993-a7f3-1393b600106c
Thanks so much!
~Peter
Last edited by linuxlefty (2008-01-31 17:32:47)

Risking the anger and wrath of the forum gods, I am bumping a verrrrry old topic.
It's close to five months since I first encountered this problem. I have waited patiently and kernel update after kernel update has brought me hope thinking that the new kernel would contain the magic fix for my problem. It's starting to get annoying, not being able to use my cdrom. So, I am once again throwing myself before the mercy of your wisdom, imploring you to supply the magic solution to my troubles.
I am once again putting debug info for good luck
lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc Unknown device 9581
01:00.1 Audio device: ATI Technologies Inc RV630 audio device [Radeon HD 2600 Series]
02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
04:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection (rev 61)
0e:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
0e:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
0e:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
0e:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
It's interesting to note that 00:lf.2 is now being labeled as a SATA controller when it was being labeled as a IDE controller before (does this mean anything)?
dmesg:
Linux version 2.6.25-ARCH (root@architect) (gcc version 4.3.0 (GCC) ) #1 SMP PREEMPT Sat Jun 14 18:07:19 CEST 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
BIOS-e820: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
BIOS-e820: 000000007fee3000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
1150MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f7fc0] 000f7fc0
Entering add_active_range(0, 0, 523984) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 523984
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 523984
On node 0 totalpages: 523984
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2301 pages used for memmap
HighMem zone: 292307 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F7EB0, 0024 (r2 LENOVO)
ACPI: XSDT 7FED721E, 0074 (r1 LENOVO CB-01 6040000 LTP 0)
ACPI: FACP 7FEDFC3A, 00F4 (r3 LENOVO CB-01 6040000 ALAN 1)
ACPI: DSDT 7FED83A5, 7821 (r2 LENOVO CB-01 6040000 MSFT 2000001)
ACPI: FACS 7FEE2FC0, 0040
ACPI: HPET 7FEDFD2E, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
ACPI: MCFG 7FEDFD66, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
ACPI: TCPA 7FEDFDA2, 0032 (r1 Intel CRESTLN 6040000 5A52)
ACPI: SLIC 7FEDFDD4, 0176 (r1 LENOVO CB-01 6040000 LNVO 1)
ACPI: TMOR 7FEDFF4A, 0026 (r1 PTLTD 6040000 PTL 3)
ACPI: APIC 7FEDFF70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: BOOT 7FEDFFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: SSDT 7FED80D6, 02CF (r1 SataRe SataAhci 1000 INTL 20050624)
ACPI: SSDT 7FED7292, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519891
Kernel command line: root=/dev/sda2 ro
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1661.966 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2072724k/2095936k available (2082k kernel code, 21932k reserved, 712k data, 268k init, 1178432k highmem)
virtual kernel memory layout:
fixmap : 0xfff80000 - 0xfffff000 ( 508 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc03c1000 - 0xc0404000 ( 268 kB)
.data : 0xc0308ad8 - 0xc03baea0 ( 712 kB)
.text : 0xc0100000 - 0xc0308ad8 (2082 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay using timer specific routine.. 3328.02 BogoMIPS (lpj=5545635)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
ACPI: Checking initramfs for custom DSDT
CPU0: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz stepping 0d
Booting processor 1/1 ip 4000
Initializing CPU#1
Calibrating delay using timer specific routine.. 18177.76 BogoMIPS (lpj=30284428)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz stepping 0d
Total of 2 processors activated (21506.78 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
net_namespace: 548 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: DMI System Vendor: LENOVO
ACPI: DMI Product Name: INVALID
ACPI: DMI Product Version: IdeaPad Y710
ACPI: DMI Board Name: INVALID
ACPI: DMI BIOS Vendor: LENOVO
ACPI: DMI BIOS Date: 12/04/2007
ACPI: Please send DMI info above to [email protected]
ACPI: If "acpi_osi=Linux" works better, please notify [email protected]
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 *3 4 5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 *4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
ACPI: Power Resource [PUBS] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
system 00:06: iomem range 0xfed00000-0xfed003ff could not be reserved
system 00:08: ioport range 0x800-0x80f has been reserved
system 00:08: ioport range 0x1000-0x107f has been reserved
system 00:08: ioport range 0x1180-0x11bf has been reserved
system 00:08: ioport range 0xfe00-0xfe00 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: 0xf4000000-0xf40fffff
PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: 0xf4100000-0xf41fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: 0xf4200000-0xf42fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
IO window: 3000-3fff
MEM window: 0xf2000000-0xf3ffffff
PREFETCH window: 0x00000000f0000000-0x00000000f1ffffff
PCI: Bridge: 0000:00:1c.5
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: 0xf4300000-0xf43fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.4 to 64
ACPI: PCI Interrupt 0000:00:1c.5[b] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Unpacking initramfs...<7>Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
done
Freeing initrd memory: 673k freed
Simple Boot Flag at 0x35 set to 0x1
apm: BIOS not found.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:01:00.0: Boot video device
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie02]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
Allocate Port Service[0000:00:1c.3:pcie03]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
Allocate Port Service[0000:00:1c.4:pcie03]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
Allocate Port Service[0000:00:1c.5:pcie02]
Allocate Port Service[0000:00:1c.5:pcie03]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 268k freed
No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 18 (level, low) -> IRQ 18
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf4604000 port 0xf4604100 irq 18
ata2: SATA max UDMA/133 abar m2048@0xf4604000 port 0xf4604180 irq 18
ata3: SATA max UDMA/133 abar m2048@0xf4604000 port 0xf4604200 irq 18
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC31P, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf4604800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 2-0:1.0: unable to enumerate USB device on port 1
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4604c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-1: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
usb usb6: configuration #1 chosen from 1 choice
Driver 'sd' needs updating - please use bus_type methods
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
hub 4-0:1.0: unable to enumerate USB device on port 4
usb 4-5: new high speed USB device using ehci_hcd and address 3
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
usb 4-5: configuration #1 chosen from 1 choice
usb 6-2: new low speed USB device using uhci_hcd and address 2
usb 6-2: configuration #1 chosen from 1 choice
rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
tg3.c:v3.91 (April 18, 2008)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:0a:e4:c8:b4:91
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.23k
iwl4965: Copyright(c) 2003-2007 Intel Corporation
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:04:00.0 to 64
iwl4965: Detected Intel Wireless WiFi Link 4965AGN
iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels
phy0: Selected rate control algorithm 'iwl-4965-rs'
ACPI: PCI interrupt for device 0000:04:00.0 disabled
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: PCI Interrupt 0000:01:00.1[b] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:01:00.1 to 64
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [SLPB]
ACPI: SSDT 7FED7DE7, 0227 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
ACPI: SSDT 7FED7778, 05EA (r1 PmRef Cpu0Cst 3001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: SSDT 7FED800E, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
ACPI: SSDT 7FED7D62, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:01 is registered as cooling_device1
Marking TSC unstable due to: TSC halts in idle.
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [TZS0] (60 C)
ACPI: LNXTHERM:02 is registered as thermal_zone1
ACPI: Thermal Zone [TZS1] (62 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
Linux agpgart interface v0.103
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Symbol init_mm is marked as UNUSED, however this module is using it.
This symbol will go away in the future.
Please evalute if this is the right api to use, and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion.
[fglrx] Adapter chains initialized successfully!
[fglrx] CF object manager initialized successfully!
[fglrx] vendor: 1002 device: 9581 count: 1
[fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes.
[fglrx] ASYNCIO init succeed!
[fglrx] PAT is enabled successfully!
[fglrx] module loaded - fglrx 8.49.7 [May 12 2008] with 1 minors
ACPI: WMI: Mapper loaded
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
ACPI: device:05 is registered as cooling_device2
input: Video Bus as /class/input/input5
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Video Bus as /class/input/input6
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
usbcore: registered new interface driver hiddev
input: Logitech Trackball as /class/input/input7
Linux video capture interface: v2.00
input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1d.1-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
uvcvideo: Found UVC 1.00 device Lenovo Easy Camera (5986:0200)
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
input: PC Speaker as /class/input/input8
input: Lenovo Easy Camera as /class/input/input9
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci: SDHCI controller found at 0000:0e:09.1 [1180:0822] (rev 22)
ACPI: PCI Interrupt 0000:0e:09.1[b] -> GSI 18 (level, low) -> IRQ 18
usbcore: registered new interface driver uvcvideo
USB Video Class driver (SVN r211)
sdhc0:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: SDHCI at 0xf4300800 irq 18 DMA
ACPI: PCI Interrupt 0000:0e:09.0[A] -> GSI 16 (level, low) -> IRQ 16
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f4300000-f43007ff] Max Packet=[2048] IR/IT contexts=[4/4]
Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04711/0xa00000
input: SynPS/2 Synaptics TouchPad as /class/input/input10
Clocksource tsc unstable (delta = -207945050 ns)
ieee1394: Host added: ID:BUS[0-00:1023] GUID[07e40a0001032048]
EXT3 FS on sda2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2000052k swap on /dev/sda1. Priority:-1 extents:1 across:2000052k
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[fglrx] Reserved FB block: Shared offset:0, size:0
[fglrx] Reserved FB block: Unshared offset:ff7b000, size:0
[fglrx] Reserved FB block: Unshared offset:fffc000, size:0
[fglrx] interrupt source 10000000 successfully enabled
[fglrx] enable ID = 0x00000006
[fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[fglrx] interrupt source 60000001 successfully enabled
[fglrx] enable ID = 0x00000007
[fglrx] Receive enable interrupt message with irqEnableMask: 60000001
[fglrx] interrupt source 00000040 successfully enabled
[fglrx] enable ID = 0x00000008
[fglrx] Receive enable interrupt message with irqEnableMask: 00000040
[fglrx] interrupt source ff00002c successfully enabled
[fglrx] enable ID = 0x00000009
[fglrx] Receive enable interrupt message with irqEnableMask: ff00002c
[fglrx] interrupt source ff00002d successfully enabled
[fglrx] enable ID = 0x0000000A
[fglrx] Receive enable interrupt message with irqEnableMask: ff00002d
[fglrx] interrupt source 20000400 successfully enabled
[fglrx] enable ID = 0x0000000B
[fglrx] Receive enable interrupt message with irqEnableMask: 20000400
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100002, writing 100006)
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:1d:0f:93:50:14
wlan0: RX authentication from 00:1d:0f:93:50:14 (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:1d:0f:93:50:14
wlan0: RX AssocResp from 00:1d:0f:93:50:14 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: switched to short barker preamble (BSSID=00:1d:0f:93:50:14)
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:1d:0f:93:50:14
wlan0: RX authentication from 00:1d:0f:93:50:14 (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:1d:0f:93:50:14
wlan0: RX ReassocResp from 00:1d:0f:93:50:14 (capab=0x431 status=0 aid=1)
wlan0: associated
process `skype' is using obsolete setsockopt SO_BSDCOMPAT
/etc/rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Shanghai"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by udev
MOD_BLACKLIST=()
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to blacklist it
MODULES=(tg3 iwl4965 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
HOSTNAME="l33t1"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
# interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
eth0="dhcp"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
#NET_PROFILES=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(!netfs crond syslog-ng @mysqld !laptop-mode @network @openntpd)
# End of file
Any ideas? I'd appreciate any light you can shead on the isssue

Microsoft SharePoint Server 2010 encountered an error during setup. One or more required office components failed to complete successfully.

Hi,
I got the below error while installing share point 2010 on Windows 7 OS.
Microsoft SharePoint Server 2010 encountered an error during setup. One or more required office components failed to complete successfully.
Trouble shooted by following link as below
http://christopherborman.blogspot.in/2013/01/installing-sharepoint-2010-on-windows-7.html
But still i am facing the same issue.Please share your inputs to cross this issue.
Regards,
Sudheer
Thanks & Regards, Sudheer

Hi,
I selected Server Farm Mode,stand alone.
Post that installation went fine.
Regards,
Sudheer
Thanks & Regards, Sudheer

Installs but doesn't detect

I have installed Flash Player 9. It works so long as the
website I visit doesn't attempt to detect whether it is installed
or not.
Unfortunately, most websites try to detect if the visitor has
Flash installed before showing the flash movie. In this case, the
website always tells me that I don't have flash, and then redirects
me to the Macromedia download page. This then tells me that I
already have Flash Player installed. And so the cycle continues.
I have run the removal tool to remove flash, then reinstalled
it. No joy.
I have run the repair tool, but I get this error message -
DllRegisterServer in
c:\windows\system32\macromed\flash\flash9b.ocx failed.
Return code was: 0x80070005
My security settings are all as should be - besides that's
not the issue, because I have installed the player, and it will
work fine on some sites eg
Thomas
the Tank Engine which don't use Flash detection scripts.
It's just the websites that do Flash detection that are the
problem, because they ALWAYS tell me I don't have Flash.
What can I do?
I have XP Pro SP2 with IE6.

Your issue has been discussed many times on this and other
forums and suffice it to say that it has become a sensitive topic
to many. At the risk of opening a can of worms, I will offer some
advice.
The activeX control (flash9b.ocx) is not getting registered
correctly, hence some Flash detection schemes will fail. There can
be any of a number of causes for this - too many to discuss here;
here are some steps I have found that can overcome a number of
potential causes.
First, carefully remove all traces of Flash Player:
Get the newest version of the Flash Uninstaller (as of
11/14/2006) from this Tech Note:
http://www.adobe.com/go/tn_14157
and run it as instructed in the tech note. Do not use any existing
Uninstaller you may have on your computer now.
Unfortunately, failed installs of Player seem to leave
remnants that the Uninstall program may not clean. So, some manual
remediation can be needed:
Go to the folder "C:\WINDOWS\SYSTEM32\Macromed\Flash" and
delete all the files in this folder (leave the folder).
Go to the folder "C:\WINDOWS\Downloaded Program Files" and if
you find "Shockwave Flash Object", delete it. It should not appear,
as it will only show if you have correctly registered the ActiveX
control (in which case you would likely not be having these
problems).
Just for grins, open the Control Panel, Add or Remove
Programs and look for any instances of Flash Player that may still
show. Hopefully, there will be none.
Now, go to “
http://www.macromedia.com/software/flash/about/”
and insure that it does not show Flash Player version installed.
At this point, you should not have any “old
stuff” to cause problems with the Flash Player 9 install. You
will also have removed any plug-ins for Firefox, Netscape, and etc.
so you will also need to open these browsers and re-install Flash
Player 9 from the Adobe site.
Now, try to reinstall from the Adobe site.
To be safest, reboot your computer into "Safe Mode with
Networking". This will insure that you don't have any programs
running that might use Flash and that none of your security
programs will interfere. See
http://support.microsoft.com/kb/315222
if you need to know how to do this.
Alternatively, deactivate any Internet security programs
(especially Norton Internet Utilities) and exit any programs in
your Windows System tray. See this Adobe Tech Note:
http://www.adobe.com/go/tn_19166.
Now open IE and open the Adobe.com home page and click on the
link to install Flash Player.
If you see the Flash movie indicating a successful
installation and get no error messages, then you are likely in good
condition. If you get error messages, then these are symptoms that
you may have more serious windows registry problems or a corrupted
IE installation.

Apple Package Failed to Install Successfully

Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DW006 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.3.0.0 Adobe Photoshop Lightroom 5.pkg_5.3 -----------
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1
So now what???

Thanks but I'm in Apple so no Temp file as in Windows. This is like a journey back in time to the days when you had to feel comfortable accessing and renaming folders on your computer instead of just starting and using the application you have paid for. I assume Adobe were able to take my subscription money without difficulty...
Sent from my iPad

10.4.6 failed installation, but successful?

Similar Messages

Maybe you are looking for