10.4.6 Install Image Not Working

I have been messing with these install images for hours now. I have the 10.4.6 DVD with liscenses for all our computers and have been trying to create a 10.4.6 install image. It seems as though I've been successfully creating the images, placing them in the right location, and selecting them as the Startup Disk, but my eMacs will not load them. I get the globe-in-a-box, then the grey apple screen with spinning globe below, then to a blue screen with pointer in the upper right hand corner after boot and then nothing. It just sits there forever (waited for over an hour for something to happen).
I've read a lot of posts about issues with 10.4.6 install images. Is there a way I can update the install to 10.4.7 software to overcome these issues. What are my options? I have about 60 computers to install 10.4.6 on and I have only one set of media. I should be able to do what I'm trying to do right?

But will that allow me to create an install image? Does the disk image utility have the ability to take an image of a system and create an install image out of it?
My goal is to create an image that will allow me to perform an archive and install of OS X on these eMacs.

Similar Messages

Oracle Clinical - install.sh not working - says not found or Java runtime error.

install.sh not working - need help
Hi all,
OS Solaris 8. Sun Sparc 20 - 256 MB 9.1 GB. I am using csh for this install as instructed for the user OPAPPS.
I have installed Oracle 8.1.6 Rel 2 on the SUN Sparc. Everything is fine and a customised DB has been created. Now I
have to install an Oracle application on the same server. I have a working knowledge of Unix but I don't know scripting.
I logged in as OPAPPS as required. (.chsrc). I have set the path with all possible directories and made it a member of
group DBA as requested.
I put the CD in the CDROM and then cd /cdrom
# install.sh
BUT I get this message: install.sh not found.
install.sh is there on the CD. This is the contents of install.sh from the CD
#!/bin/sh
os=`uname | tr A-A a-z`
case "$os" in
sunos) platform=solaris
hp-ux) platform=hp-ux
osf1) platform=decunix
esac
#The environment variable $SRCHOME cannot be set during installation
unset SRCHOME
unset SHLIB_PATH
CMDDIR=`dirname $0`
if [ "CMDDIR" = "." ]; then
CMDDIR=`pwd`;
fi
# Replace relatove path with fully qualified path
if [ ! "`echo $CMDDIR|grep '^/'`" ]; then
CMDDIR=`pwd`/$CMDDIR;
fi
if [ x${PATH} != x ] ; then
PATH=$PATH:/usr/bin: /bin
export PATH
else
PATH=/usr/bin:/bin
fi
cd $CMDDIR/$platform/Disk1/install/$platform
./runinstaller $*
directory structure on CD
-r-xr-xr-x 1 root sys 638 Aug 23 2000 install.sh
dr-xr-xr-x solaris
dr-xr-xr-x hpunix
dr-xr-xr-x decunix
dr-xr-xr-x nls732
solaris/disk1/install/solaris and the file
-r-xr-xr-x runinsta.
-r-xr-xr-x oraparm.ini
dr-xr-xr-x images
d .
d ..
Would anybody know why I get install.sh NOT found when it is there?. This executabel is on the CD. I am not sure why it gives
a java runtime error message when it is OK. Remember, I have already installed Oracle 8i using the same environment with the existing java runtime .
Thanks for your help.

Hi,
I am installing Oracle clinical 4.5.x.
I need to know whether both the Database server and application server for Oracle Clinical can be installed on same server(windows 2000 server).
Both of them are installed on windows platform.
It seems that u have tried the single node installation.
So,please give all the possible details regarding the single node installation for oracle clinical no matter what platform it is.
Please reply me as soon as possible, its urgent.
Thanking u in advance.

RH 8 Shed images not working

1. Shed images not working as of Nov. 12 2009

Hi all
Thanks for all the info - but I'm still stumped. I have tried generating my .chm
files to the default SSL folders, manually copying all the child chms to the SSL
folder for the master project, letting RH copy them, generating all chms to an
external folder... no matter what I do, every time I recompile the master
project it picks up random old stuff. I have checked and rechecked that my
merged TOC items are to the latest child chms...
Sometimes when I recomplie the master project, even the content in that reverts
back to a previous version, sometimes it doesn't...
I have looked at the Merged Files list in the hhp file, I have deleted this file
and started my merge from scratch, I have manually deleted some paths (some
paths are to directories on the server where any files for this project have
long since been deleted...) directly in this file, but again every time I
recompile the master project it picks up random old versions of the child chms (
and the huge list of old merged files are put back in the hhp file. Even when I
delete all chms from all locations in the folder I'm working in on my C drive,
delete all the merged TOC items from the master project, save it, and
recompile it, the list of old merged files reappears in the hhp file).
Any more thoughts gratefully received:-)
Also - I don't have a Baggage Files folder??
One more thing... If I delete ALL the files under Merged Files in the hhp file using HTML Help Workshop, it crashes

Anychart save as pdf/image not working

A while ago I posed this question when the right click, save as stopped working on my APEX charts
Apex charts - right click, save as image (not responding)
The problem resolved when anychart.com was back up, but the problem is occurring again and I wonder if they've moved their php files. Not even in Hilary's sample app is working. We think this happened within the last month.
After choosing save as image and a location, the "saving" just keeps spinning.
Most anychart google results at the moment seem to revert to the same landing page, and webcached copies refer to locations that no longer exist.
I wonder with post anychart7 cleanup, have they moved the supporting php files? For instance, this location no longer exists
http://www.anychart.com/products/anychart/saveas/pdf/PDFSaver.php
A workaround is to use a local copy of the php file with custom XML
<settings>
<pdf_export file_name="mychart.pdf" use_title_as_file_name="true" url="/i/AnyChart4_SaveAsPDF_php4/PDFSaver.php" image_type="jpg" />
But I only have the PDFSaver, not the AnyChartPNGSaver.php
This file no longer exists either:
http://anychart.com/products/anychart/docs/users-guide/export_image_scripts/php.zip
Does anyone know where I can source the png saver php, or suggest another workaround? Or have any other information on this issue.
An email to [email protected] back in 2013 got no reply.
APEX 4.2.0
Scott.

Hi Scott,
So, if i understand properly, making this change
<settings><pdf_export file_name="mychart.pdf" use_title_as_file_name="true" url="/i/AnyChart4_SaveAsPDF_php4/PDFSaver.php" image_type="jpg" />
will avoid atleast PDF issue? And as i dont have privileges to install or deinstall anything on /i/ folder, still this will work and URL path will remain same for each installation?
Adding another question, as you said "it sends base64 information when converting to PDF", does it mean i will not be able to convert to PDF, if i am using intranet and PC's not accessible to internet?
Thanks
Sunil Bhatia

Copy and Paste of Images NOT working.

When I right click on an image and choose 'copy image' and then try to paste it into my editing software, all i get is a string of text that is the location of the image as if I had chosen 'copy image location' instead. what gives?

I too was unable to copy & paste ''IMAGES'' suddenly. This function continued to work correctly in my Internet Explorer and Chrome browsers while not working in Firefox. (I WAS able to copy & paste ''''TEXT'''' however in all 3 browsers.)
As described by another poster, I would click on "Copy image" as I always did, but instead of the image appearing when I clicked paste, the ''URL'' of the image appeared instead.
My computer developed this problem suddenly yesterday after downloading and installing the newest version of Firefox, which is 12. I tried some of the suggested solutions here to no avail, but I strongly suspected the problem was with Firefox 12. To test this, I re-installed Firefox 11 and immediately my copy & paste function started to work correctly once again and I am now able to copy & paste images once again.
I will not install Firefox 12 again until Firefox corrects this problem. I need this function and do not want to have to deal with a convoluted method of saving a graphic with unnecessary extra steps, thank you. Every single time I upgrade Firefox, something is incompatible with the new version and no longer works. This is always a nuisance, especially when it is my Norton toolbar.
This time it was my copy & paste function (again, for images only.) Anyone else with this problem should re-install Firefox 11 to see if their copy & pasting of images function is suddenly restored, as mine was. Good luck! :)

Imaging not working (3.2 SP3 on NW6SP4) - works at three sites but not fourth...

About a month ago we set up ZfD3.2, SP3 on our NW6 SP4 servers. All of the
client workstations are XP Pro with client 4.9.0 SP2. We manually installed
the Linux partition on all machines and that is mostly working. I say
mostly because some of the workstations don't import into NDS the first
time - have to push on a few of them. That's not the question though.
At three sites, once the machines are in NDS clean, we can from C1 push down
a new images on reboot. It works - client reboots, ZfD partition sees that
the machine is to be re-imaged, and the workstation pulls down a new image.
One site doesn't reimage though. At this fourth site, the Linux partition
boots, and you see the message "Task Completed" but the imaging doesn't
happen. If you then go into C1 you'll see that the workstation has had the
"Reimage on reboot" flag cleared. The sites were all set up at the same
time - what could cause this one to fail? If you boot to the Linux
partition you can manually pull down an image. Just the auto-image doesn't
work...
I should say that after the time these servers/sites were set up, I found
that the Public Key Certificates had expired. Ran PKIDIAG and it rebuilt
the keys but, I still can't RConsoleJ into the server (that is running
Imaging and Inventory) using Secure IP - have to use Unsecure IP. The other
three sites I can use Secure IP. Don't know if that's a factor or not and
haven't found out why (Secure IP doesn't work) but that's the only
difference I've found between sites.
Need to reimage some labs at this site pretty regularly and don't want to
have to do it manuallly each time!
Thoughts/Comments/Insight???
Thx - Owen

Well manually shutting down the database, inventory service, java, etc
didn't affect the prob. Restarting the server and letting everything come
back up did. Imaging is working now...
FWIW - Owen
"Owen Squires" <[email protected]> wrote in message
news:[email protected]...
> About a month ago we set up ZfD3.2, SP3 on our NW6 SP4 servers. All of
> the client workstations are XP Pro with client 4.9.0 SP2. We manually
> installed the Linux partition on all machines and that is mostly working.
> I say mostly because some of the workstations don't import into NDS the
> first time - have to push on a few of them. That's not the question
> though.
>
> At three sites, once the machines are in NDS clean, we can from C1 push
> down a new images on reboot. It works - client reboots, ZfD partition
> sees that the machine is to be re-imaged, and the workstation pulls down a
> new image. One site doesn't reimage though. At this fourth site, the
> Linux partition boots, and you see the message "Task Completed" but the
> imaging doesn't happen. If you then go into C1 you'll see that the
> workstation has had the "Reimage on reboot" flag cleared. The sites were
> all set up at the same time - what could cause this one to fail? If you
> boot to the Linux partition you can manually pull down an image. Just the
> auto-image doesn't work...
>
> I should say that after the time these servers/sites were set up, I found
> that the Public Key Certificates had expired. Ran PKIDIAG and it rebuilt
> the keys but, I still can't RConsoleJ into the server (that is running
> Imaging and Inventory) using Secure IP - have to use Unsecure IP. The
> other three sites I can use Secure IP. Don't know if that's a factor or
> not and haven't found out why (Secure IP doesn't work) but that's the only
> difference I've found between sites.
>
> Need to reimage some labs at this site pretty regularly and don't want to
> have to do it manuallly each time!
>
> Thoughts/Comments/Insight???
>
> Thx - Owen
>

CLI admin password rest using install cdrom not working on ACS 5.5 cumulative patch 1

Hi,
I can't log onto either of our ACS 5.5 servers using the CLI admin passwords (which we do have recorded and no one appears to have changed ).
I get accessed denied on both.
On our DR ACS I went through the procedure of resetting the CLI admin password using the install cd mounted in the VM (the iso is actually for 5.3) , but even after picking a new password, I get access denied when I try to use it.
Does anyone know what could be wrong?
Is it possible that patching to ACS 5.5 from ACS 5.3 (a month or so ago) has some how locked out the passwords ?
Thanks.

Hi,
The reason why it is not working is because you need to use the ISO image or cd for ACS 5.5.
If you try to reset the CLI administrator password with an ISO image or cd for other ACS version it will not take the new password.
Please give it a try with the 5.5 image.
Regards,
Gerald

Netboot Multi Cast Image not working

After reading through tons of documentation and forums I finally found that you can create (supposedly) a multi cast image in Disk Utility, then use System Image Utility to create a NetBoot image with it and have a multi cast image to deploy though NetBoot. However, it's not working.
I read if I mounted the image.dmg, then opened DU, Selected the image in DU's side bar, clicked "Image" from the menu bar, then "Scan image for restore..." it would automatically turn it into a multi cast image file. So I did that.
After the image went through the DU's image scanning process, I used System Image Utility to crate a "NetRestore Image". That process went though successfully, as well. I can see what appears to be the correct files under /Library/NetBoot/NetBootSP0. However, when I NetBoot the computers I want to re-image I see explication points over the NetInstall file and the NetInstall files don't look like the normal NetInstall icons.
I used the original image before to create a NetBoot image, but didn't do the "Scan image for restore..." and it was successful. But now that I've Scanned the image it won't work.
Does anyone know how to make it work?
Did I not do the multi cast process correctly?
Any tips or walkthroughs you could give would be really appreciated.
*Please, assume I'm stupid and give clear details of what to do, thank you!*
Here is what the computer's install options look like:
http://gallery.me.com/josephfrazier#100567/IMG_0909&bgcolor=black

Wow...deploystudio is amazing. Always works flawlessly for me and is super customizable. When was the last time you tried it? I think it is a lot easier and def. a lot less frustrating than netrestore which has never worked properly in the past for me. And they also have a dedicated forum for any issues you might have.

Flash Player installed but not working....

had a virus 3 days ago which was resolved with assistance from Microsoft. Now Adobe Flash does not work (when I go to Youtube, it says I do not have the latest version. I have unistalled, restarted, installed at least 10 times. Sites still say I need the latest version. I do see Adobe Flash Player 10 Active X in the programs in my control panel. I have downloaded version 10.1.102.64. I am running IE8 (i assume 32-bit since it does not say 64-bit) on Windows Vista. I have checked the files in my windows/system32/macromed/flash folder and it show the following files:
Flash Player Trust folder
Flash10I.ocx
FlashInstall
FlashUtil10I_ActiveX.dll
FlashUtil10I_ActiveX
install
I had turned off my Norton AV and firewall. I have also made sure that all security has been set to medium at that java scripting shows as enabled...
Flash player still does does not work: says I need to install latest version on websites (youtube etc.)
HELP!!

Hi, I see you've been on quite a few forums advocating Firefox & Chrome. All this does is give them a browser that perhaps Flash Player would be performing as it should. But it doesn't solve their issue with IE.
And referring users to follow procedures meant for another user under different circumstances and computer configurations
is not in their best interest.
All you are doing is confusing the person, since the required information about their computer has not been obtained.
You may want to rethink posting referrals, I could do that myself, since I'm on a lot of threads here.
eidnolb

Latest Flash Player Install is not working

Hello, I need some help please. I have been through the install process at least seven times if not more, all previous versions of flash player have been deleted, and it is not working. Sites that I regularly use are still wanting me to install the software that I know I have installed. Even more frustrating is that there is no other way to contact Adobe about this unless one wants to pay $39 to speak with someone, which I refuse to do when it is their product that is not working right. PLEASE HELP ME!!

pwillener wrote:
Download the installer from http://forums.adobe.com/thread/889580
That one worked nicely. Thanks for your help!
I guess the installer from the main download page was just a downloader, and for whatever reason it didn't work for me.

Google Images not working in Safari on Iphone

Since a while back the "images"-tab in google does'nt work on the iPhone in any of the browsers I've tried. I've searched the net to find others with the same problem but with little luck. Here's a description of the problem.
For example I search for "dog" in google in the Safari browser, this works just fine.
Then I press the "images"-tab and get a thumbnail view with pictures of dogs, of course.
But this is where it all goes wrong, when touching one of the images I get an enlarged view of an image next to it. The "back to the results" and "full image" buttons dim out (without being touchable) and swiping does not work. I don't know what has caused this to stop working properly, I know its not the new iOS version though.
HERE is a youtube video I prepared that explains the problem.
First, is there anyone else out there with this problem?
Second, this is what I've tried:
- Other iPhone web browser applications, for example "Mercury", "Opera Mini", "Skyfire" and none of them works except "Dolphin" (good work).
- Resetting any of the settings in the phone, clearing cache and such have no effect.
- Resetting the iPhone totally, factory settings. No effect.
- Using someone elses iPhone. I've tried on an iPhone 4 and iPhone 3S, same problems (with iOS 5.01).
- Trying out all of the settings in google, no change.
- Setting the google view to "classic" instead of "mobile" works of course, but that makes the site look just like on a PC or Mac and is not what I'm after.
Third, this problem seems to just affect Swedish users from what I can tell. There would be thousands of posts about this if everyone in the world was affected by it, but so far I've seen no posts on this matter. But after searching a while I found a swedish forum site on the subject. Link (in swedish). Also, when visiting google from Sweden some form of script automatically changes the url from .com to .se. I don't know if this has something to do with it?
Anyone know what causes this problem and how It might be resolved?
Best Regard
Stefan, Sweden

Hi Stefan,
First; this must be the most thorough error discription I have ever seen. Impressive.
Second; yep for a couple of weeks now I've been having exactly the same problems as you describe. One other thing that I've noticed, is that for me, the 'word suggestion drop down list' or whatever it's name is, no longer works. More specificly:
I open Safari in my iPhone, surf to Google image search and type for example "dog" in the search field. Below the field, I now get a list of suggested words or phrases that I think is based on the most popular searches. For me, the first suggestion in this list is "dogo argentino" (a specific and popular breed of dogs). When I tap on the words "dogo argentino", the search field normally would switch input from "dog" to "dogo argentino" AND starts the image search automatically. However, since the problem showed up, when I tap on "dogo argentino" the input field is not affected (still reads "dog") and I would have to type "dogo argentino" manually and hit "search".
I use a Swedish iPhone 4S (5.0.1 (9A406)) in the Telenor network. I also have tested the same possible solutions that you describe in your post, but with no luck.
All the best,
Ingo

Flash Player 10.1 installed, but not working in any browser, or showing up on C:

I recently updated my flash player, however since then, websites requiring flash do not seem to fully load. However, it should also be noted that there is no notification indicating I need to install the software. Sites such as youtube will load, but fail to display the video I want to view, and showing only a black box. Also, sites I need for my HSC preparation are not working, such as the Board of Studies Online Multiple Choice, and Maths Online. The web page will load, indicating "done" in the bottom left corner of the screen, but the screen will be white.
I have tried the following:
un-installing, and re-installing (numerous times)
Restarting the system after both un-installing and re-installing
Checking all mentioned websites on three browsers --> Firefox 3.5.11, IE 8, Google Chrome. All presented the same outcome: blank pages etc.
Ensuring that flash was enabled in all above browsers
My operating system is 32 bit; Vista (Have checked this file-- C:/Windows/System32/Adobe -- and found that the flash player files are absent despite being 'told' it has successfully installed. After which the 'movie'/'f' symbol does not show up in the installation check online)
I assume all the above browsers are 32bit as well, however I'm not sure how to check this.
Please help... I have been searching forums for hours and trying various methods to attempt to fix the problem myself, but have been unsuccessful. It has become increasingly frustrating with the approaching HSC only a couple of weeks away !

There is no flashinstall.log file in that folder. There is a FlashInstall file that opens in Notepad when I click on it. The contents of that file are below. Does this give you any clue as to what is wrong? It is WAY beyond my techincal competence.
O====== M/10.1.53.64 2010-06-30+12-55-33.468 ========
0000 [I] 00000010 "C:\DOCUME~1\Jack\LOCALS~1\Temp\FlashPlayerUpdate.exe"
0001 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0002 [I] 00000013 C:\WINDOWS\system32\Macromed\Flash\Flash10h.ocx
0003 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10h_ActiveX.exe
0004 [I] 00000016 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10h_ActiveX.dll
=X====== M/10.1.53.64 2010-06-30+12-59-15.421 ========
=O====== M/10.1.53.64 2010-09-08+01-32-00.015 ========
0000 [I] 00000010 "C:\WINDOWS\system32\Macromed\Flash\FlashUtil10h_ActiveX.exe" -update activex
0001 [I] 00000011 0
=X====== M/10.1.53.64 2010-09-08+01-33-11.890 ========
=O====== M/10.1.82.76 2010-09-08+01-33-12.000 ========
0000 [I] 00000010 "C:\DOCUME~1\Jack\LOCALS~1\Temp\6.dir\InstallFlashPlayer.exe" -iv 0
0001 [I] 00000013 C:\WINDOWS\system32\Macromed\Flash\Flash10i.ocx
0002 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10i_ActiveX.exe
0003 [I] 00000016 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10i_ActiveX.dll
=X====== M/10.1.82.76 2010-09-08+01-34-24.843 ========
=O====== M/10.1.85.3 2010-09-28+12-32-48.531 ========
0000 [I] 00000010 "C:\Documents and Settings\All Users\Application Data\NOS\Adobe_Downloads\install_flash_player_ax.exe" -install
0001 [I] 00000013 C:\WINDOWS\system32\Macromed\Flash\Flash10k.ocx
0002 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10k_ActiveX.exe
0003 [I] 00000016 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10k_ActiveX.dll
=X====== M/10.1.85.3 2010-09-28+12-32-52.312 ========
=O====== M/10.1.85.3 2010-10-01+19-16-44.187 ========
0000 [I] 00000010 "C:\Documents and Settings\All Users\Application Data\NOS\Adobe_Downloads\install_flash_player_ax.exe" -install
0001 [I] 00000013 C:\WINDOWS\system32\Macromed\Flash\Flash10k.ocx
0002 [W] 00001024 C:\WINDOWS\system32\Macromed\Flash\Flash10k.ocx 183
0003 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10k_ActiveX.exe
0004 [W] 00001024 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10k_ActiveX.exe 183
0005 [I] 00000016 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10k_ActiveX.dll
0006 [W] 00001024 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10k_ActiveX.dll 183
=X====== M/10.1.85.3 2010-10-01+19-16-47.171 ========
=O====== M/10.1.85.3 2010-10-02+14-53-44.781 ========
0000 [I] 00000010 "C:\Documents and Settings\All Users\Application Data\NOS\Adobe_Downloads\install_flash_player_ax.exe" -install
0001 [I] 00000013 C:\WINDOWS\system32\Macromed\Flash\Flash10k.ocx
0002 [W] 00001024 C:\WINDOWS\system32\Macromed\Flash\Flash10k.ocx 183
0003 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10k_ActiveX.exe
0004 [W] 00001024 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10k_ActiveX.exe 183
0005 [I] 00000016 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10k_ActiveX.dll
0006 [W] 00001024 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10k_ActiveX.dll 183
=X====== M/10.1.85.3 2010-10-02+14-53-47.984 ========
=O====== M/10.1.85.3 2010-10-03+17-09-08.328 ========
0000 [I] 00000010 "C:\Documents and Settings\All Users\Application Data\NOS\Adobe_Downloads\install_flash_player_ax.exe" -install
0001 [I] 00000013 C:\WINDOWS\system32\Macromed\Flash\Flash10k.ocx
0002 [W] 00001024 C:\WINDOWS\system32\Macromed\Flash\Flash10k.ocx 183
0003 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10k_ActiveX.exe
0004 [W] 00001024 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10k_ActiveX.exe 183
0005 [I] 00000016 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10k_ActiveX.dll
0006 [W] 00001024 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10k_ActiveX.dll 183
=X====== M/10.1.85.3 2010-10-03+17-09-11.687 ========
=O====== M/10.1.85.3 2010-10-03+17-10-33.390 ========
0000 [I] 00000010 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10k_ActiveX.exe -maintain activex
=X====== M/10.1.85.3 2010-10-03+17-11-12.546 ========
=O====== M/10.1.85.3 2010-10-03+17-11-16.296 ========
0000 [I] 00000010 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10k_ActiveX.exe -maintain activex
0001 [W] 00001015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10k_ActiveX.exe 5
0002 [I] 00000018
0003 [W] 00001015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10k_ActiveX.exe 5
0004 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\RunOnce/FlashPlayerUpdate 2
0005 [W] 00001037 Software\Macromedia\FlashPlayerActiveX/ 2
0006 [W] 00001037 Software\Macromedia\FlashPlayer/SwfInstall 2
0007 [W] 00001021
0008 [I] 00000012
=X====== M/10.1.85.3 2010-10-03+17-11-26.281 ========
=O====== M/10.1.85.3 2010-10-03+17-12-52.531 ========
0000 [I] 00000010 "C:\Documents and Settings\All Users\Application Data\NOS\Adobe_Downloads\install_flash_player_ax.exe" -install
0001 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player ActiveX/ 2
0002 [I] 00000013 C:\WINDOWS\system32\Macromed\Flash\Flash10k.ocx
0003 [I] 00000015 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10k_ActiveX.exe
0004 [I] 00000016 C:\WINDOWS\system32\Macromed\Flash\FlashUtil10k_ActiveX.dll
=X====== M/10.1.85.3 2010-10-03+17-12-54.531 ========
=O====== M/10.1.85.3 2010-10-03+17-23-21.671 ========
0000 [I] 00000010 "C:\WINDOWS\system32\Macromed\Flash\FlashUtil10k_ActiveX.exe"
=X====== M/10.1.85.3 2010-10-03+17-23-27.578 ========

Why is code to get center of image not working?

Hey there. I have am trying to establish the center of the imags that load so that I can put them in the center of the stage. I am doing this as each image is a different size.
Here is the code i have gotten to work before but its not working now and I have been searching to find what I have done wrong with no luck. : (
Would you look it over and maybe you will see what I am doing wrong?
public function placePicture(e:Event = null):void {
     rawImage = imageData.image[imgNum].imageURL;
     lastImageIndex = imageData.*.length() - 1;
     imageLoader = new Loader;
     imageHolder = new Sprite;
     imageLoader.load(new URLRequest(rawImage));
     imageLoader.x -= imageLoader.width/2; //this should set the image to the center no?
     imageLoader.y -= imageLoader.height/2;
     imageHolder.x = 640; //this is the center of the stage
     imageHolder.y = 100;
     imageHolder.addChild(imageLoader);
     masterHolder.addChild(imageHolder);
The result when I publish is the picture comes on stage but the top left corner goes to 640 instead of the center of the image going to 640.
I tried several variations of this all with the same result:
imageLoader.x = -1*imageLoader.width/2;
I tried using setRegistrationPoint with the following tutorial: http://flashscript.ca/set-registration-as3.php
and I tried doing all of the above by inserting the loader into a sprite and then applying the code to the sprite and then adding that sprite to another sprite and putting that at 640 and not inserting it in another sprite and trying to straight up put the existing sprite at 640 (hopefully that all makes sense). And I have tried to put it to width/3 and nothing different happens.
If you have any other ideas or can see what I am doing wrong I would really be gratefull for some tips! : )
Thanks for any help!
oh, and I am getting no errors on this.

the image's width and height are not available until loading is complete. ie, use a complete listener/listener function.

True caller is installed but not working please let me know the setting.

i installed true caller in my 5s but the caller id is not working and its not showing caller detail while i received any unknown calls.

Contact the developer of true caller for assistance.
Be advised that certain wireless providers do not send the information
needed for caller ID when the caller has blocked his number or is spoofing
it.

My java is installed but not working

My java is installed and it was working fine a couple of days ago but when i went to restart my computer my java had stop working. I checked to see if my enable java was checked in the security tab, and it is but it's still not working? Is something wrong with my Mac? since i had restarted my safari i'm thinking that was the issue.

Check if your bank has a app for the iPad. It sounds like you are trying to use the bank's web page/site rather than using an app.

10.4.6 Install Image Not Working

Similar Messages

Maybe you are looking for