10.4.6 installed - no problems and no double boot either

I've gotten into the habit of running all major updates from a fresh OS backup on an external FW drive using the combo updates. This allows me to install the update to either drive, in this case the Boot Drive. In the case of this update, I didn't have ANY of the problems or concerns mentioned elsewhere, no dual boot, no extra wait time on boot, no failures, nada.
So, if you haven't purchased an external drive for backup and such here is another great reason to.

It's been reported that you will not get the dual boot when using the 10.4.6 Combo. I just ran the update using Software Update and got the dual boot, no problem however, worked great.
Steve M.

Similar Messages

5G IPOD Install: Drive problem and destroyed CD/DVD drive access - HELP!!!!

5g video IPOD 30G, Windows 2000 - Installed IPOD software and Itunes. Connected IPOD and got disk access error message. Not only I can't get to my IPOD, but it did something to my CD/DVD drivers. Drivers no longer load with an error that windows can't load driver for this device.
Uninstalled itunes and ipod. Still no drive.
Anyone has any idea?

well done Josh!
In any case after the media 7.1 is removed, drivers finally loaded up OK again. Then IPOD reinstall worked.
ouch. so you were getting a code 31?
Cannot Access CD-ROM and "Code 31" Error Message in Device Manager After You Remove Adaptec Easy CD Creator from Your Computer
(although the title of the MS KB doc doesn't mention it, Windows Media 7 is listed as possible cause of this in there.)
love, b

MacBook Pro not booting to mac osx making partition on windows side and windows not booting either help

I have a macbook pro with windows 7 on bootcamp partition. I made a partition in windows 7 using disk mgmt and after that my computer wont show mac os partition and only show windows and when i boot to windows it errors out with blue screen unmountable volume. I was able to get in to command prompt of windows and use that command to boot to mac os but it failed giving error bootcamp.msi not found please any help in this issue will be appreciated.
Thanks

Highwaytohells wrote:
Hi,
I own a Macbook pro 13 inch since about 3 years and
snip
but there is no way for me to boot in the Mac OSX. Could anyone help me ?
It is broken, take it to the Apple Store for repair.

Problems installing Adobe Air and BBC iPlayer Desktop

Problems installing Adobe Air and BBC iPlayer Desktop
I'm running Windows 7 32 bit on an ASUS netbook with 2mb ram. I installed both Air 3.7 and BBC iPlayer Desktop using Google Chrome. I downloaded 3 BBC programmes. Two ran fine but the third wouldn't start and I kept getting a message to try again later. I deleted this programme and downloaded it again, with the same result.
So I uninstalled both Air and the BBC iPlayer Desktop, the Air exe file and the two folders at the following locations:
C:\Users\USERNAME\AppData\Roaming\Adobe\AIR\   and
C:\Users\USERNAME\AppData\Roaming\BBCiPlayerDesktop.xxx
Since doing this each time I try to install Air either on its own or with the BBC iPlayer software I get the message part way through installation:
"Sorry, an error has occurred.
An error occurred while installing Adobe AIR. Installation may not be allowed by your administrator. Please contact your administrator."
I have run the Microsoft Fix it programme and still get the same result.
I have tried everything on your Trouble Shooting page apart from the bit about the elevated command prompt, but as I'm the sole user and administrator, that seems unnecessary.
I have closed Chrome and tried installation using Windows Explorer but with the same result.
I have tried all the above with Microsoft Security Essentials running and disabled. And I have tried the same with Astrill on and off.
I have had a response from the BBC with much the same advice as appears on your trouble shooting page.
Here is the Air installation log, followed by the MSI log.
[2013-04-25:06:53:46] Runtime Installer begin with version 3.7.0.1530 on
Windows Vista x86
[2013-04-25:06:53:46] Commandline is:
[2013-04-25:06:53:46] No installed runtime detected
[2013-04-25:06:53:57] Relaunching with elevation
[2013-04-25:06:53:57] Launching subprocess with commandline c:\users
\steve\appdata\local\temp\air79c1.tmp\adobe air installer.exe -ei
[2013-04-25:06:54:02] Runtime Installer begin with version 3.7.0.1530 on
Windows 7 x86
[2013-04-25:06:54:02] Commandline is: -stdio \\.\pipe\AIR_1172_0 -ei
[2013-04-25:06:54:02] No installed runtime detected
[2013-04-25:06:54:03] Starting silent runtime install. Installing runtime version
3.7.0.1530
[2013-04-25:06:54:04] Installing msi at c:\users\steve\appdata\local\temp
\air79c1.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:06:54:10] Error occurred during msi install operation; beginning
rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
text="1603" errorID=0]
[2013-04-25:06:54:10] Rolling back install of c:\users\steve\appdata\local
\temp\air79c1.tmp\setup.msi
[2013-04-25:06:54:10] Rollback complete
[2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:54:10] Runtime Installer end with exit code 7
[2013-04-25:06:54:20] Runtime Installer end with exit code 7
[2013-04-25:06:55:38] Runtime Installer begin with version 3.7.0.1530 on
Windows Vista x86
[2013-04-25:06:55:38] Commandline is:
[2013-04-25:06:55:38] No installed runtime detected
[2013-04-25:06:55:45] Relaunching with elevation
[2013-04-25:06:55:45] Launching subprocess with commandline c:\users
\steve\appdata\local\temp\air30fe.tmp\adobe air installer.exe -ei
[2013-04-25:06:55:48] Runtime Installer begin with version 3.7.0.1530 on
Windows Vista x86
[2013-04-25:06:55:48] Commandline is: -stdio \\.\pipe\AIR_1264_0 -ei
[2013-04-25:06:55:48] No installed runtime detected
[2013-04-25:06:55:49] Starting silent runtime install. Installing runtime version
3.7.0.1530
[2013-04-25:06:55:51] Installing msi at c:\users\steve\appdata\local\temp
\air30fe.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:06:55:55] Error occurred during msi install operation; beginning
rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
text="1603" errorID=0]
[2013-04-25:06:55:55] Rolling back install of c:\users\steve\appdata\local
\temp\air30fe.tmp\setup.msi
[2013-04-25:06:55:55] Rollback complete
[2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:55:55] Runtime Installer end with exit code 7
[2013-04-25:06:55:59] Runtime Installer end with exit code 7
[2013-04-25:07:05:12] Runtime Installer begin with version 3.7.0.1530 on
Windows 7 x86
[2013-04-25:07:05:12] Commandline is:
[2013-04-25:07:05:12] No installed runtime detected
[2013-04-25:07:05:18] Relaunching with elevation
[2013-04-25:07:05:18] Launching subprocess with commandline c:\users
\steve\appdata\local\temp\air953.tmp\adobe air installer.exe -ei
[2013-04-25:07:05:24] Runtime Installer begin with version 3.7.0.1530 on
Windows 7 x86
[2013-04-25:07:05:24] Commandline is: -stdio \\.\pipe\AIR_3888_0 -ei
[2013-04-25:07:05:24] No installed runtime detected
[2013-04-25:07:05:24] Starting silent runtime install. Installing runtime version
3.7.0.1530
[2013-04-25:07:05:26] Installing msi at c:\users\steve\appdata\local\temp
\air953.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:07:05:29] Error occurred during msi install operation; beginning
rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
text="1603" errorID=0]
[2013-04-25:07:05:29] Rolling back install of c:\users\steve\appdata\local
\temp\air953.tmp\setup.msi
[2013-04-25:07:05:29] Rollback complete
[2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:05:29] Runtime Installer end with exit code 7
[2013-04-25:07:05:31] Runtime Installer end with exit code 7
[2013-04-25:07:06:12] Runtime Installer begin with version 3.7.0.1530 on
Windows Vista x86
[2013-04-25:07:06:12] Commandline is:
[2013-04-25:07:06:12] No installed runtime detected
[2013-04-25:07:06:21] Relaunching with elevation
[2013-04-25:07:06:22] Launching subprocess with commandline c:\users
\steve\appdata\local\temp\aire916.tmp\adobe air installer.exe -ei
[2013-04-25:07:06:32] Runtime Installer begin with version 3.7.0.1530 on
Windows 7 x86
[2013-04-25:07:06:32] Commandline is: -stdio \\.\pipe\AIR_5884_0 -ei
[2013-04-25:07:06:32] No installed runtime detected
[2013-04-25:07:06:32] Starting silent runtime install. Installing runtime version
3.7.0.1530
[2013-04-25:07:06:33] Installing msi at c:\users\steve\appdata\local\temp
\aire916.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:07:06:37] Error occurred during msi install operation; beginning
rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
text="1603" errorID=0]
[2013-04-25:07:06:37] Rolling back install of c:\users\steve\appdata\local
\temp\aire916.tmp\setup.msi
[2013-04-25:07:06:37] Rollback complete
[2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:06:37] Runtime Installer end with exit code 7
[2013-04-25:07:06:40] Runtime Installer end with exit code 7
[2013-04-25:07:26:15] Runtime Installer begin with version 3.7.0.1530 on
Windows Vista x86
[2013-04-25:07:26:15] Commandline is:
[2013-04-25:07:26:15] No installed runtime detected
[2013-04-25:07:26:28] Relaunching with elevation
[2013-04-25:07:26:28] Launching subprocess with commandline c:\users
\steve\appdata\local\temp\air3063.tmp\adobe air installer.exe -ei
[2013-04-25:07:26:37] Runtime Installer begin with version 3.7.0.1530 on
Windows 7 x86
[2013-04-25:07:26:37] Commandline is: -stdio \\.\pipe\AIR_2348_0 -ei
[2013-04-25:07:26:37] No installed runtime detected
[2013-04-25:07:26:37] Starting silent runtime install. Installing runtime version
3.7.0.1530
[2013-04-25:07:26:39] Installing msi at c:\users\steve\appdata\local\temp
\air3063.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:07:26:48] Error occurred during msi install operation; beginning
rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
text="1603" errorID=0]
[2013-04-25:07:26:48] Rolling back install of c:\users\steve\appdata\local
\temp\air3063.tmp\setup.msi
[2013-04-25:07:26:48] Rollback complete
[2013-04-25:07:26:48] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:26:48] Runtime Installer end with exit code 7
[2013-04-25:07:46:09] Runtime Installer end with exit code 7
=== Verbose logging started: 25/04/2013 08:34:51 Build type: SHIP UNICODE
5.00.7601.00 Calling process: C:\windows\System32\msiexec.exe ===
MSI (c) (68:6C) [08:34:51:397]: Font created. Charset: Req=0, Ret=0, Font:
Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (68:6C) [08:34:51:397]: Font created. Charset: Req=0, Ret=0, Font:
Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (68:70) [08:34:51:469]: Resetting cached policy values
MSI (c) (68:70) [08:34:51:469]: Machine policy value 'Debug' is 0
MSI (c) (68:70) [08:34:51:469]: ******* RunEngine:
           ******* Product: C:\Users\Steve\Downloads\MicrosoftFixit50381.msi
           ******* Action:
           ******* CommandLine: **********
MSI (c) (68:70) [08:34:51:473]: Machine policy value 'DisableUserInstalls' is 0
MSI (c) (68:70) [08:34:51:653]: SOFTWARE RESTRICTION POLICY: Verifying
package --> 'C:\Users\Steve\Downloads\MicrosoftFixit50381.msi' against
software restriction policy
MSI (c) (68:70) [08:34:51:654]: SOFTWARE RESTRICTION POLICY: C:\Users
\Steve\Downloads\MicrosoftFixit50381.msi has a digital signature
MSI (c) (68:70) [08:34:51:966]: SOFTWARE RESTRICTION POLICY: C:\Users
\Steve\Downloads\MicrosoftFixit50381.msi is permitted to run at the
'unrestricted' authorization level.
MSI (c) (68:70) [08:34:51:986]: Cloaking enabled.
MSI (c) (68:70) [08:34:51:986]: Attempting to enable all disabled privileges
before calling Install on Server
MSI (c) (68:70) [08:34:52:001]: End dialog not enabled
MSI (c) (68:70) [08:34:52:001]: Original package ==> C:\Users\Steve
\Downloads\MicrosoftFixit50381.msi
MSI (c) (68:70) [08:34:52:001]: Package we're running from ==> C:\Users
\Steve\Downloads\MicrosoftFixit50381.msi
MSI (c) (68:70) [08:34:52:010]: APPCOMPAT: Compatibility mode property
overrides found.
MSI (c) (68:70) [08:34:52:012]: APPCOMPAT: looking for appcompat database
entry with ProductCode '{55D13F49-FCB8-4892-8266-05D373FCAA61}'.
MSI (c) (68:70) [08:34:52:012]: APPCOMPAT: no matching ProductCode found
in database.
MSI (c) (68:70) [08:34:52:041]: MSCOREE not loaded loading copy from
system32
MSI (c) (68:70) [08:34:52:063]: Machine policy value 'TransformsSecure' is 0
MSI (c) (68:70) [08:34:52:063]: User policy value 'TransformsAtSource' is 0
MSI (c) (68:70) [08:34:52:064]: Note: 1: 2262 2: File 3: -2147287038
MSI (c) (68:70) [08:34:52:064]: Note: 1: 2262 2: MsiFileHash 3: -2147287038
MSI (c) (68:70) [08:34:52:065]: Machine policy value 'DisablePatch' is 0
MSI (c) (68:70) [08:34:52:065]: Machine policy value 'AllowLockdownPatch' is
0
MSI (c) (68:70) [08:34:52:066]: Machine policy value 'DisableMsi' is 0
MSI (c) (68:70) [08:34:52:066]: Machine policy value 'AlwaysInstallElevated' is
0
MSI (c) (68:70) [08:34:52:066]: User policy value 'AlwaysInstallElevated' is 0
MSI (c) (68:70) [08:34:52:066]: Running product '{55D13F49-FCB8-4892-
8266-05D373FCAA61}' with user privileges: It's not assigned.
MSI (c) (68:70) [08:34:52:067]: Machine policy value 'DisableLUAPatching' is 0
MSI (c) (68:70) [08:34:52:067]: Machine policy value
'DisableFlyWeightPatching' is 0
MSI (c) (68:70) [08:34:52:068]: Enabling baseline caching for this transaction
since all active patches are MSI 3.0 style MSPs or at least one MSI 3.0 minor
update patch is active
MSI (c) (68:70) [08:34:52:071]: APPCOMPAT: looking for appcompat database
entry with ProductCode '{55D13F49-FCB8-4892-8266-05D373FCAA61}'.
MSI (c) (68:70) [08:34:52:072]: APPCOMPAT: no matching ProductCode found
in database.
MSI (c) (68:70) [08:34:52:072]: Transforms are not secure.
MSI (c) (68:70) [08:34:52:073]: PROPERTY CHANGE: Adding MsiLogFileLocation
property. Its value is 'C:\Users\Steve\AppData\Local\Temp\MSIa5745.LOG'.
MSI (c) (68:70) [08:34:52:073]: Command Line: CURRENTDIRECTORY=C:\Users
\Steve\Downloads CLIENTUILEVEL=0 CLIENTPROCESSID=9576
MSI (c) (68:70) [08:34:52:073]: PROPERTY CHANGE: Adding PackageCode
property. Its value is '{1C7C3009-013E-4A16-9A0F-0000FB80A613}'.
MSI (c) (68:70) [08:34:52:073]: Product Code passed to Engine.Initialize:
MSI (c) (68:70) [08:34:52:073]: Product Code from property table before
transforms: '{55D13F49-FCB8-4892-8266-05D373FCAA61}'
MSI (c) (68:70) [08:34:52:073]: Product Code from property table after
transforms: '{55D13F49-FCB8-4892-8266-05D373FCAA61}'
MSI (c) (68:70) [08:34:52:073]: Product not registered: beginning first-time
install
MSI (c) (68:70) [08:34:52:073]: PROPERTY CHANGE: Adding ProductState
property. Its value is '-1'.
MSI (c) (68:70) [08:34:52:073]: Entering
CMsiConfigurationManager::SetLastUsedSource.
MSI (c) (68:70) [08:34:52:073]: User policy value 'SearchOrder' is 'nmu'
MSI (c) (68:70) [08:34:52:073]: Adding new sources is allowed.
MSI (c) (68:70) [08:34:52:074]: PROPERTY CHANGE: Adding
PackagecodeChanging property. Its value is '1'.
MSI (c) (68:70) [08:34:52:074]: Package name extracted from package path:
'MicrosoftFixit50381.msi'
MSI (c) (68:70) [08:34:52:075]: Package to be registered:
'MicrosoftFixit50381.msi'
MSI (c) (68:70) [08:34:52:075]: Note: 1: 2262 2: Error 3: -2147287038
MSI (c) (68:70) [08:34:52:078]: Note: 1: 2262 2: AdminProperties 3: -
2147287038
MSI (c) (68:70) [08:34:52:078]: Machine policy value 'AlwaysInstallElevated' is
0
MSI (c) (68:70) [08:34:52:078]: User policy value 'AlwaysInstallElevated' is 0
MSI (c) (68:70) [08:34:52:079]: Running product '{55D13F49-FCB8-4892-
8266-05D373FCAA61}' with user privileges: It's not assigned.
MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding
CURRENTDIRECTORY property. Its value is 'C:\Users\Steve\Downloads'.
MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding CLIENTUILEVEL
property. Its value is '0'.
MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding CLIENTPROCESSID
property. Its value is '9576'.
MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding
MsiSystemRebootPending property. Its value is '1'.
MSI (c) (68:70) [08:34:52:079]: TRANSFORMS property is now:
MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding VersionDatabase
property. Its value is '200'.
MSI (c) (68:70) [08:34:52:081]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming
MSI (c) (68:70) [08:34:52:082]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\Favorites
MSI (c) (68:70) [08:34:52:084]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Network Shortcuts
MSI (c) (68:70) [08:34:52:085]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\Documents
MSI (c) (68:70) [08:34:52:086]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
MSI (c) (68:70) [08:34:52:088]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Recent
MSI (c) (68:70) [08:34:52:089]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\SendTo
MSI (c) (68:70) [08:34:52:091]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Templates
MSI (c) (68:70) [08:34:52:092]: SHELL32::SHGetFolderPath returned: C:
\ProgramData
MSI (c) (68:70) [08:34:52:093]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Local
MSI (c) (68:70) [08:34:52:094]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\Pictures
MSI (c) (68:70) [08:34:52:097]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
\Administrative Tools
MSI (c) (68:70) [08:34:52:098]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
\Startup
MSI (c) (68:70) [08:34:52:099]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
MSI (c) (68:70) [08:34:52:101]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu
MSI (c) (68:70) [08:34:52:102]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\Desktop
MSI (c) (68:70) [08:34:52:104]: SHELL32::SHGetFolderPath returned: C:
\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (c) (68:70) [08:34:52:106]: SHELL32::SHGetFolderPath returned: C:
\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
MSI (c) (68:70) [08:34:52:106]: SHELL32::SHGetFolderPath returned: C:
\ProgramData\Microsoft\Windows\Start Menu\Programs
MSI (c) (68:70) [08:34:52:107]: SHELL32::SHGetFolderPath returned: C:
\ProgramData\Microsoft\Windows\Start Menu
MSI (c) (68:70) [08:34:52:109]: SHELL32::SHGetFolderPath returned: C:
\Users\Public\Desktop
MSI (c) (68:70) [08:34:52:113]: SHELL32::SHGetFolderPath returned: C:
\windows\Fonts
MSI (c) (68:70) [08:34:52:115]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans
Serif 4: 0 5: 16
MSI (c) (68:70) [08:34:52:147]: MSI_LUA: Setting AdminUser property to 1
because this is the client or the user has already permitted elevation
MSI (c) (68:70) [08:34:52:147]: PROPERTY CHANGE: Adding AdminUser
property. Its value is '1'.
MSI (c) (68:70) [08:34:52:147]: PROPERTY CHANGE: Adding Privileged
property. Its value is '1'.
MSI (c) (68:70) [08:34:52:148]: Note: 1: 1402 2: HKEY_CURRENT_USER
\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (c) (68:70) [08:34:52:148]: PROPERTY CHANGE: Adding USERNAME
property. Its value is 'Steve'.
MSI (c) (68:70) [08:34:52:149]: Note: 1: 1402 2: HKEY_CURRENT_USER
\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding DATABASE
property. Its value is 'C:\Users\Steve\Downloads\MicrosoftFixit50381.msi'.
MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding OriginalDatabase
property. Its value is 'C:\Users\Steve\Downloads\MicrosoftFixit50381.msi'.
MSI (c) (68:70) [08:34:52:149]: Machine policy value 'MsiDisableEmbeddedUI' is
0
MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding SourceDir
property. Its value is 'C:\Users\Steve\Downloads\'.
MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding SOURCEDIR
property. Its value is 'C:\Users\Steve\Downloads\'.
MSI (c) (68:6C) [08:34:52:153]: PROPERTY CHANGE: Adding VersionHandler
property. Its value is '5.00'.
=== Logging started: 25/04/2013 08:34:52 ===
MSI (c) (68:70) [08:34:52:171]: Note: 1: 2262 2: PatchPackage 3: -
2147287038
MSI (c) (68:70) [08:34:52:172]: Machine policy value 'DisableRollback' is 0
MSI (c) (68:70) [08:34:52:172]: User policy value 'DisableRollback' is 0
MSI (c) (68:70) [08:34:52:172]: PROPERTY CHANGE: Adding UILevel property.
Its value is '5'.
MSI (c) (68:70) [08:34:52:172]: Note: 1: 2262 2: Font 3: -2147287038
MSI (c) (68:70) [08:34:52:174]: PROPERTY CHANGE: Adding ACTION property.
Its value is 'INSTALL'.
MSI (c) (68:70) [08:34:52:174]: Doing action: INSTALL
Action 08:34:52: INSTALL.
Action start 08:34:52: INSTALL.
MSI (c) (68:70) [08:34:52:176]: UI Sequence table 'InstallUISequence' is
present and populated.
MSI (c) (68:70) [08:34:52:176]: Running UISequence
MSI (c) (68:70) [08:34:52:176]: PROPERTY CHANGE: Adding EXECUTEACTION
property. Its value is 'INSTALL'.
MSI (c) (68:70) [08:34:52:176]: Doing action: Milestone_ERRCA_UIAN726
Action 08:34:52: Milestone_ERRCA_UIAN726.
Action start 08:34:52: Milestone_ERRCA_UIAN726.
MSI (c) (68:70) [08:34:52:177]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'Milestone_ERRCA_UIAN726'
MSI (c) (68:70) [08:34:52:178]: PROPERTY CHANGE: Adding Milestone
property. Its value is 'ERRCA_UIANDADVERTISED'.
Action ended 08:34:52: Milestone_ERRCA_UIAN726. Return value 1.
MSI (c) (68:70) [08:34:52:178]: Skipping action: ERRCA_UIANDADVERTISED
(condition is false)
MSI (c) (68:70) [08:34:52:178]: Doing action: Milestone_AppSearch122
Action 08:34:52: Milestone_AppSearch122.
Action start 08:34:52: Milestone_AppSearch122.
MSI (c) (68:70) [08:34:52:180]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'Milestone_AppSearch122'
MSI (c) (68:70) [08:34:52:180]: PROPERTY CHANGE: Modifying Milestone
property. Its current value is 'ERRCA_UIANDADVERTISED'. Its new value:
'AppSearch'.
Action ended 08:34:52: Milestone_AppSearch122. Return value 1.
MSI (c) (68:70) [08:34:52:181]: Doing action: AppSearch
Action 08:34:52: AppSearch. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:52: AppSearch.
MSI (c) (68:70) [08:34:52:182]: Note: 1: 2262 2: AppSearch 3: -2147287038
Action ended 08:34:52: AppSearch. Return value 1.
MSI (c) (68:70) [08:34:52:183]: Doing action: FindRelatedProducts
Action 08:34:52: FindRelatedProducts. {\FinalUIFont}
[PROGRESS_RESTORE_TXT]
Action start 08:34:52: FindRelatedProducts.
Action ended 08:34:52: FindRelatedProducts. Return value 1.
MSI (c) (68:70) [08:34:52:185]: Doing action: Milestone_EulaForm201
Action 08:34:52: Milestone_EulaForm201.
Action start 08:34:52: Milestone_EulaForm201.
MSI (c) (68:70) [08:34:52:186]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'Milestone_EulaForm201'
MSI (c) (68:70) [08:34:52:187]: PROPERTY CHANGE: Modifying Milestone
property. Its current value is 'AppSearch'. Its new value: 'EulaForm'.
Action ended 08:34:52: Milestone_EulaForm201. Return value 1.
MSI (c) (68:70) [08:34:52:187]: Doing action: EulaForm
Action 08:34:52: EulaForm.
Action start 08:34:52: EulaForm.
MSI (c) (68:70) [08:34:52:193]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'EulaForm'
MSI (c) (68:6C) [08:34:52:205]: Note: 1: 2262 2: Error 3: -2147287038
Info 2898.For VSI_MS_Sans_Serif13.0_0_0 textstyle, the system created a 'MS
Sans Serif' font, in 0 character set, of 13 pixels height.
MSI (c) (68:6C) [08:34:52:221]: Note: 1: 2262 2: Error 3: -2147287038
Info 2898.For VsdDefaultUIFont.524F4245_5254_5341_4C45_534153783400
textstyle, the system created a 'MS Sans Serif' font, in 0 character set, of 13
pixels height.
MSI (c) (68:6C) [08:34:52:225]: Note: 1: 2262 2: Error 3: -2147287038
Info 2898.For VSI_MS_Sans_Serif16.0_1_0 textstyle, the system created a 'MS
Sans Serif' font, in 0 character set, of 20 pixels height.
MSI (c) (68:6C) [08:34:52:301]: Note: 1: 2262 2: CheckBox 3: -2147287038
Action 08:34:52: EulaForm. Dialog created
MSI (c) (68:10) [08:34:52:312]: Note: 1: 2731 2: 0
MSI (c) (68:6C) [08:34:55:670]: PROPERTY CHANGE: Adding EulaForm_Property
property. Its value is '1'.
Action ended 08:34:56: EulaForm. Return value 1.
MSI (c) (68:70) [08:34:56:881]: Doing action: EULAACCEPTED_ACTION
Action 08:34:56: EULAACCEPTED_ACTION.
Action start 08:34:56: EULAACCEPTED_ACTION.
MSI (c) (68:70) [08:34:56:883]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'EULAACCEPTED_ACTION'
MSI (c) (68:70) [08:34:56:883]: PROPERTY CHANGE: Adding EULAACCEPTED
property. Its value is '1'.
Action ended 08:34:56: EULAACCEPTED_ACTION. Return value 1.
MSI (c) (68:70) [08:34:56:884]: Doing action: Milestone_LaunchCond24
Action 08:34:56: Milestone_LaunchCond24.
Action start 08:34:56: Milestone_LaunchCond24.
MSI (c) (68:70) [08:34:56:886]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'Milestone_LaunchCond24'
MSI (c) (68:70) [08:34:56:887]: PROPERTY CHANGE: Modifying Milestone
property. Its current value is 'EulaForm'. Its new value: 'LaunchConditions'.
Action ended 08:34:56: Milestone_LaunchCond24. Return value 1.
MSI (c) (68:70) [08:34:56:889]: Doing action: LaunchConditions
Action 08:34:56: LaunchConditions. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: LaunchConditions.
Action ended 08:34:56: LaunchConditions. Return value 1.
MSI (c) (68:70) [08:34:56:891]: Doing action: CCPSearch
Action 08:34:56: CCPSearch. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: CCPSearch.
MSI (c) (68:70) [08:34:56:892]: Note: 1: 2262 2: CCPSearch 3: -2147287038
Action ended 08:34:56: CCPSearch. Return value 1.
MSI (c) (68:70) [08:34:56:892]: Doing action: RMCCPSearch
Action 08:34:56: RMCCPSearch. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: RMCCPSearch.
MSI (c) (68:70) [08:34:56:893]: Note: 1: 2262 2: CCPSearch 3: -2147287038
Action ended 08:34:56: RMCCPSearch. Return value 0.
MSI (c) (68:70) [08:34:56:894]: Doing action: ValidateProductID
Action 08:34:56: ValidateProductID. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: ValidateProductID.
Action ended 08:34:56: ValidateProductID. Return value 1.
MSI (c) (68:70) [08:34:56:895]: Doing action: Milestone_DIRCA_TARG947
Action 08:34:56: Milestone_DIRCA_TARG947.
Action start 08:34:56: Milestone_DIRCA_TARG947.
MSI (c) (68:70) [08:34:56:897]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'Milestone_DIRCA_TARG947'
MSI (c) (68:70) [08:34:56:897]: PROPERTY CHANGE: Modifying Milestone
property. Its current value is 'LaunchConditions'. Its new value:
'DIRCA_TARGETDIR'.
Action ended 08:34:56: Milestone_DIRCA_TARG947. Return value 1.
MSI (c) (68:70) [08:34:56:897]: Doing action: DIRCA_TARGETDIR
Action 08:34:56: DIRCA_TARGETDIR. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: DIRCA_TARGETDIR.
MSI (c) (68:70) [08:34:56:899]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'DIRCA_TARGETDIR'
MSI (c) (68:70) [08:34:56:900]: PROPERTY CHANGE: Adding TARGETDIR
property. Its value is 'C:\Program Files\Microsoft\Microsoft Fix it 50381'.
Action ended 08:34:56: DIRCA_TARGETDIR. Return value 1.
MSI (c) (68:70) [08:34:56:900]: Doing action: CostInitialize
Action 08:34:56: CostInitialize. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: CostInitialize.
MSI (c) (68:70) [08:34:56:901]: Machine policy value 'MaxPatchCacheSize' is
10
MSI (c) (68:70) [08:34:56:901]: Baseline: Sorting baselines for {55D13F49-
FCB8-4892-8266-05D373FCAA61}.
MSI (c) (68:70) [08:34:56:901]: Baseline: New baseline 2.1.3 from transaction.
MSI (c) (68:70) [08:34:56:902]: Baseline: Sorted order Native: Order 0.
MSI (c) (68:70) [08:34:56:902]: Baseline Data Table:
MSI (c) (68:70) [08:34:56:902]: ProductCode: {55D13F49-FCB8-4892-8266-
05D373FCAA61} Version: 2.1.3 Attributes: 0 PatchId: Native BaselineId: -
2147483648 Order: 0
MSI (c) (68:70) [08:34:56:902]: Baseline File Table:
MSI (c) (68:70) [08:34:56:912]: PROPERTY CHANGE: Adding ROOTDRIVE
property. Its value is 'D:\'.
MSI (c) (68:70) [08:34:56:913]: PROPERTY CHANGE: Adding CostingComplete
property. Its value is '0'.
Action ended 08:34:56: CostInitialize. Return value 1.
MSI (c) (68:70) [08:34:56:914]: Doing action: FileCost
Action 08:34:56: FileCost. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: FileCost.
MSI (c) (68:70) [08:34:56:915]: Note: 1: 2262 2: MsiAssembly 3: -2147287038
MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: RemoveFile 3: -2147287038
MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: MoveFile 3: -2147287038
MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: DuplicateFile 3: -2147287038
MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: Shortcut 3: -2147287038
MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: Class 3: -2147287038
MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: Extension 3: -2147287038
MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: TypeLib 3: -2147287038
MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: IniFile 3: -2147287038
MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: ReserveCost 3: -2147287038
Action ended 08:34:56: FileCost. Return value 1.
MSI (c) (68:70) [08:34:56:917]: Doing action: IsolateComponents
Action 08:34:56: IsolateComponents. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: IsolateComponents.
MSI (c) (68:70) [08:34:56:919]: Note: 1: 2262 2: BindImage 3: -2147287038
MSI (c) (68:70) [08:34:56:919]: Note: 1: 2262 2: IsolatedComponent 3: -
2147287038
MSI (c) (68:70) [08:34:56:919]: Note: 1: 2262 2: Patch 3: -2147287038
Action ended 08:34:56: IsolateComponents. Return value 1.
MSI (c) (68:70) [08:34:56:920]: Skipping action: ResumeForm (condition is
false)
MSI (c) (68:70) [08:34:56:920]: Skipping action: MaintenanceForm (condition
is false)
MSI (c) (68:70) [08:34:56:920]: Doing action: CostFinalize
Action 08:34:56: CostFinalize. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: CostFinalize.
MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding OutOfDiskSpace
property. Its value is '0'.
MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding
OutOfNoRbDiskSpace property. Its value is '0'.
MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding
PrimaryVolumeSpaceAvailable property. Its value is '0'.
MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding
PrimaryVolumeSpaceRequired property. Its value is '0'.
MSI (c) (68:70) [08:34:56:921]: PROPERTY CHANGE: Adding
PrimaryVolumeSpaceRemaining property. Its value is '0'.
MSI (c) (68:70) [08:34:56:921]: Note: 1: 2262 2: Patch 3: -2147287038
MSI (c) (68:70) [08:34:56:921]: Note: 1: 2262 2: Condition 3: -2147287038
MSI (c) (68:70) [08:34:56:923]: PROPERTY CHANGE: Modifying TARGETDIR
property. Its current value is 'C:\Program Files\Microsoft\Microsoft Fix it 50381'.
Its new value: 'C:\Program Files\Microsoft\Microsoft Fix it 50381\'.
MSI (c) (68:70) [08:34:56:923]: Target path resolution complete. Dumping
Directory table...
MSI (c) (68:70) [08:34:56:923]: Note: target paths subject to change (via
custom actions or browsing)
MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: TARGETDIR          , Object: C:
\Program Files\Microsoft\Microsoft Fix it 50381\
MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: WindowsFolder          , Object: C:
\windows\
MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: ProgramMenuFolder          ,
Object: C:\Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu
\Programs\
MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: DesktopFolder          , Object: C:
\Users\Steve\Desktop\
MSI (c) (68:70) [08:34:56:923]: PROPERTY CHANGE: Adding INSTALLLEVEL
property. Its value is '1'.
MSI (c) (68:70) [08:34:56:923]: Note: 1: 2262 2: IsolatedComponent 3: -
2147287038
MSI (c) (68:70) [08:34:56:924]: Note: 1: 2262 2: BindImage 3: -2147287038
MSI (c) (68:70) [08:34:56:924]: Note: 1: 2262 2: Patch 3: -2147287038
MSI (c) (68:70) [08:34:56:924]: Note: 1: 2262 2: RemoveFile 3: -2147287038
Action ended 08:34:56: CostFinalize. Return value 1.
MSI (c) (68:70) [08:34:56:925]: Doing action: ProgressForm
Action 08:34:56: ProgressForm.
Action start 08:34:56: ProgressForm.
MSI (c) (68:70) [08:34:56:926]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'ProgressForm'
MSI (c) (68:6C) [08:34:56:938]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2826: Control Line1 on dialog ProgressForm extends beyond the
boundaries of the dialog to the right by 3 pixels
The installer has encountered an unexpected error installing this package. This
may indicate a problem with this package. The error code is 2826. The
arguments are: ProgressForm, Line1, to the right
MSI (c) (68:6C) [08:34:56:941]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2826: Control Line2 on dialog ProgressForm extends beyond the
boundaries of the dialog to the right by 3 pixels
The installer has encountered an unexpected error installing this package. This
may indicate a problem with this package. The error code is 2826. The
arguments are: ProgressForm, Line2, to the right
MSI (c) (68:6C) [08:34:56:948]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2826: Control BannerBmp on dialog ProgressForm extends beyond
the boundaries of the dialog to the right by 3 pixels
The installer has encountered an unexpected error installing this package. This
may indicate a problem with this package. The error code is 2826. The
arguments are: ProgressForm, BannerBmp, to the right
Action 08:34:56: ProgressForm. Dialog created
Action ended 08:34:57: ProgressForm. Return value 1.
MSI (c) (68:70) [08:34:57:011]: Doing action: ExecuteAction
Action 08:34:57: ExecuteAction. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
MSI (c) (68:6C) [08:34:57:012]: Note: 1: 2262 2: Error 3: -2147287038
Info 2898.For FinalUIFont textstyle, the system created a 'Arial' font, in 0
character set, of 15 pixels height.
Action start 08:34:57: ExecuteAction.
MSI (c) (68:70) [08:34:57:035]: PROPERTY CHANGE: Adding SECONDSEQUENCE
property. Its value is '1'.
MSI (c) (68:70) [08:34:57:043]: Grabbed execution mutex.
MSI (c) (68:70) [08:34:57:043]: Incrementing counter to disable shutdown.
Counter after increment: 0
MSI (c) (68:70) [08:34:57:045]: Switching to server: TARGETDIR="C:\Program
Files\Microsoft\Microsoft Fix it 50381\" EULAACCEPTED="1"
CURRENTDIRECTORY="C:\Users\Steve\Downloads" CLIENTUILEVEL="0"
CLIENTPROCESSID="9576" USERNAME="Steve" SOURCEDIR="C:\Users\Steve
\Downloads\" ACTION="INSTALL" EXECUTEACTION="INSTALL" ROOTDRIVE="D:\"
INSTALLLEVEL="1" SECONDSEQUENCE="1" ADDLOCAL=DefaultFeature
MSI (s) (C8:D4) [08:34:57:086]: Running installation inside multi-package
transaction C:\Users\Steve\Downloads\MicrosoftFixit50381.msi
MSI (s) (C8:D4) [08:34:57:086]: Grabbed execution mutex.
MSI (s) (C8:BC) [08:34:57:092]: Resetting cached policy values
MSI (s) (C8:BC) [08:34:57:092]: Machine policy value 'Debug' is 0
MSI (s) (C8:BC) [08:34:57:092]: ******* RunEngine:
           ******* Product: C:\Users\Steve\Downloads\MicrosoftFixit50381.msi
           ******* Action: INSTALL
           ******* CommandLine: **********
MSI (s) (C8:BC) [08:34:57:096]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (C8:BC) [08:34:57:097]: Setting cached product context: User non-
assigned for product: 48945AC3B41AEF24F91FE79A10157D52
MSI (s) (C8:BC) [08:34:57:097]: Using cached product context: User non-
assigned for product: 48945AC3B41AEF24F91FE79A10157D52
MSI (s) (C8:BC) [08:34:57:099]: Setting cached product context: User non-
assigned for product: 6BBFDF96D153C8B4988D68D79C0D2A4A
MSI (s) (C8:BC) [08:34:57:099]: Using cached product context: User non-
assigned for product: 6BBFDF96D153C8B4988D68D79C0D2A4A
MSI (s) (C8:BC) [08:34:57:101]: Setting cached product context: User non-
assigned for product: CAB1E4D953B64F542BD433D9568A0AB6
MSI (s) (C8:BC) [08:34:57:101]: Using cached product context: User non-
assigned for product: CAB1E4D953B64F542BD433D9568A0AB6
MSI (s) (C8:BC) [08:34:57:103]: Setting cached product context: User non-
assigned for product: DED5B648C8CDA1E45B4BF9B5930AACEC
MSI (s) (C8:BC) [08:34:57:103]: Using cached product context: User non-
assigned for product: DED5B648C8CDA1E45B4BF9B5930AACEC
MSI (s) (C8:BC) [08:34:57:104]: Setting cached product context: User non-
assigned for product: E2EE924EC67B3554B8404B55780FF01D
MSI (s) (C8:BC) [08:34:57:104]: Using cached product context: User non-
assigned for product: E2EE924EC67B3554B8404B55780FF01D
MSI (s) (C8:BC) [08:34:57:106]: Setting cached product context: machine
assigned for product: 00002109001001400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:106]: Using cached product context: machine
assigned for product: 00002109001001400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:107]: Setting cached product context: machine
assigned for product: 00002109001031400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:108]: Using cached product context: machine
assigned for product: 00002109001031400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:110]: Setting cached product context: machine
assigned for product: 00002109001070400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:110]: Using cached product context: machine
assigned for product: 00002109001070400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:111]: Setting cached product context: machine
assigned for product: 000021090010C0400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:111]: Using cached product context: machine

Hi Chris,
The AIR installation log is in my original post - about 12 paras down but here is is:
[2013-04-25:06:53:46] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
[2013-04-25:06:53:46] Commandline is:
[2013-04-25:06:53:46] No installed runtime detected
[2013-04-25:06:53:57] Relaunching with elevation
[2013-04-25:06:53:57] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air79c1.tmp\adobe air installer.exe -ei
[2013-04-25:06:54:02] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
[2013-04-25:06:54:02] Commandline is: -stdio \\.\pipe\AIR_1172_0 -ei
[2013-04-25:06:54:02] No installed runtime detected
[2013-04-25:06:54:03] Starting silent runtime install. Installing runtime version 3.7.0.1530
[2013-04-25:06:54:04] Installing msi at c:\users\steve\appdata\local\temp\air79c1.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:06:54:10] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:54:10] Rolling back install of c:\users\steve\appdata\local\temp\air79c1.tmp\setup.msi
[2013-04-25:06:54:10] Rollback complete
[2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:54:10] Runtime Installer end with exit code 7
[2013-04-25:06:54:20] Runtime Installer end with exit code 7
[2013-04-25:06:55:38] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
[2013-04-25:06:55:38] Commandline is:
[2013-04-25:06:55:38] No installed runtime detected
[2013-04-25:06:55:45] Relaunching with elevation
[2013-04-25:06:55:45] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air30fe.tmp\adobe air installer.exe -ei
[2013-04-25:06:55:48] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
[2013-04-25:06:55:48] Commandline is: -stdio \\.\pipe\AIR_1264_0 -ei
[2013-04-25:06:55:48] No installed runtime detected
[2013-04-25:06:55:49] Starting silent runtime install. Installing runtime version 3.7.0.1530
[2013-04-25:06:55:51] Installing msi at c:\users\steve\appdata\local\temp\air30fe.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:06:55:55] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:55:55] Rolling back install of c:\users\steve\appdata\local\temp\air30fe.tmp\setup.msi
[2013-04-25:06:55:55] Rollback complete
[2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:55:55] Runtime Installer end with exit code 7
[2013-04-25:06:55:59] Runtime Installer end with exit code 7
[2013-04-25:07:05:12] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
[2013-04-25:07:05:12] Commandline is:
[2013-04-25:07:05:12] No installed runtime detected
[2013-04-25:07:05:18] Relaunching with elevation
[2013-04-25:07:05:18] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air953.tmp\adobe air installer.exe -ei
[2013-04-25:07:05:24] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
[2013-04-25:07:05:24] Commandline is: -stdio \\.\pipe\AIR_3888_0 -ei
[2013-04-25:07:05:24] No installed runtime detected
[2013-04-25:07:05:24] Starting silent runtime install. Installing runtime version 3.7.0.1530
[2013-04-25:07:05:26] Installing msi at c:\users\steve\appdata\local\temp\air953.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:07:05:29] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:05:29] Rolling back install of c:\users\steve\appdata\local\temp\air953.tmp\setup.msi
[2013-04-25:07:05:29] Rollback complete
[2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:05:29] Runtime Installer end with exit code 7
[2013-04-25:07:05:31] Runtime Installer end with exit code 7
[2013-04-25:07:06:12] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
[2013-04-25:07:06:12] Commandline is:
[2013-04-25:07:06:12] No installed runtime detected
[2013-04-25:07:06:21] Relaunching with elevation
[2013-04-25:07:06:22] Launching subprocess with commandline c:\users\steve\appdata\local\temp\aire916.tmp\adobe air installer.exe -ei
[2013-04-25:07:06:32] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
[2013-04-25:07:06:32] Commandline is: -stdio \\.\pipe\AIR_5884_0 -ei
[2013-04-25:07:06:32] No installed runtime detected
[2013-04-25:07:06:32] Starting silent runtime install. Installing runtime version 3.7.0.1530
[2013-04-25:07:06:33] Installing msi at c:\users\steve\appdata\local\temp\aire916.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:07:06:37] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:06:37] Rolling back install of c:\users\steve\appdata\local\temp\aire916.tmp\setup.msi
[2013-04-25:07:06:37] Rollback complete
[2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:06:37] Runtime Installer end with exit code 7
[2013-04-25:07:06:40] Runtime Installer end with exit code 7
[2013-04-25:07:26:15] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
[2013-04-25:07:26:15] Commandline is:
[2013-04-25:07:26:15] No installed runtime detected
[2013-04-25:07:26:28] Relaunching with elevation
[2013-04-25:07:26:28] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air3063.tmp\adobe air installer.exe -ei
[2013-04-25:07:26:37] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
[2013-04-25:07:26:37] Commandline is: -stdio \\.\pipe\AIR_2348_0 -ei
[2013-04-25:07:26:37] No installed runtime detected
[2013-04-25:07:26:37] Starting silent runtime install. Installing runtime version 3.7.0.1530
[2013-04-25:07:26:39] Installing msi at c:\users\steve\appdata\local\temp\air3063.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:07:26:48] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:26:48] Rolling back install of c:\users\steve\appdata\local\temp\air3063.tmp\setup.msi
[2013-04-25:07:26:48] Rollback complete
[2013-04-25:07:26:48] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:26:48] Runtime Installer end with exit code 7
[2013-04-25:07:46:09] Runtime Installer end with exit code 7

HT3986 I've had MS Office:mac 2011 on my imac for around 18 months now. Outlook has just disappeared and when I find the file and open it it tells me that there is a problem and I may need to re-install it. I've just done this using the installation dis

I've had MS Office:mac 2011 on my imac for around 18 months now. Outlook has just disappeared and when I find the file and open it it tells me that there is a problem and I may need to re-install it. I've just done this using the installation disc which, then said the installation had been successful.
Outlook is still not working. Can anyone please advise me on what to do next.

Remove MS Office 2011 completely (here are instructions) and reinstall it.
It's not a simple or fast process but it is important to follow all of the steps in order to get all the files that Office scatters around. This will not affect your data files, only MS Office and its preferences.

Why can't I install iTunes version 10.5 or higher? I've tried everything suggested on this forum, my friend has a mac and she can't either and it seems like the main problem is the apple Mobile device.exe wont install and applesync

Hey anybody,
Neither myself (running on PC windows vista 32 bit) or my friend (on a mac) are able to install versions of iTunes around 10.5 or higher successfully. This leads me to believe the problem isn't necessarily with our computers and there may be something wrong elsewhere. I'm not a computer wiz but I have tried most of the advice on these forums e.g. Uninstalling and reinstalling, deleting temporary files, expanding files and trying individual downloads and more. I can install older versions of iTunes where they use to combine it with QuickTime with no problems however this is no good to me or my friend because only versions 10.5 and up come with support with iPhone 4S and that's what we need. I managed after several attempts to install iTunes 10.52 but without the apple mobile device so therefor the iTunes wouldn't connect to my phone or recognise it, apple sync notifier also has problems and fails to start.
Please can someone help me with this, I have tried everything on the apple troubleshooting pages so please don't link me those. Or please can iTunes and apple do something in an update that corrects this problem because I know many people are having similar issues. I only bought this phone for the music and at the moment I feel cheated because I wouldn't have these problems with any other phone because I'd just be able to drag and drop.

Hi there,
I had the same experience. I'm using a Dell Inspiron 1545 laptop, with Windows 7 Home Edition, 32 bit.
I tried to install iTunes 10.5 and it started installing, then, just before the end of the process, came up with the following error message:
"There is a problem with this Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
Of course, no information on what the program that couldn't be run was! At first I tried the usual stuff, like scanning for viruses etc. but nothing doing. Then I started Googling. In the end, I uninstalled all Apple stuff from my computer. A lot of it I had to do manually, going in to the program files drive and deleting stuff from there, but some of it wouldn't delete as it was saying it was open in Windows Explorer. In the end, I managed to delete the iTunes folders by selecting one of my mp3 tracks saved on the computer and right clicking 'open with'. I then browsed my pc to locate the iTunes folders still outstanding and was able to right click and delete them that way.
Then emptied the recycle bin and did a restart before going online and downloading iTunes 10.5.
Thankfully it worked, but its taken me a good few hours and made me really quite tetchy! I've never had this problem before, so I hope this is going to be a one off.
One thing that doesn't seem to be working is that, despite how many times I tell it that my preference is for the iTunes Media folder to be located on my external hard drive, it keeps putting it back to the C drive! Didn't have that issue with the last version. Grrrrrr. Arrrrgggh.
Hope you manage to get yours sorted - this is affecting a lot of people by the look of things.

When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close

When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close

i don't know how they solved it, i'm having the same problem on Windows XP
EventType : BEX
P1 : iTunes.exe
P2 : 10.7.0.21
P3 : 504d85d9
P4 : unknown
P5 : 0.0.0.0
P6 : 00000000
P7 : 08920740
P8 : c0000005
P9 : 00000008

Firefox.exe has encountered a problem and needs to close. We are sorry for the inconvenience. I have been using firefox for years. I installed the latest version of Firefox. It worked fine for several days. Now I get the above message each time I try to s

firefox.exe has encountered a problem and needs to close. We are sorry for the inconvenience.
I have been using firefox for years. I installed the latest version of Firefox. It worked fine for several days. Now I get the above message each time I try to start Firefox, even in safe mode. i have checked with latest antivirus softwere also.. i didn't find any thing suspicious.
== This happened ==
Every time Firefox opened
== after loading firefox 3.6.6 ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

I was having this problem few days ago,and I have fixed.Try this steps-If you have AVG antivirus so go on firefox>Tools>Add On and Disable AVG safe search and AVG tool bars too.Then restart computer.

I have installed iTunes on my new windows 7 dell laptop every time I start it it comes up with an error saying itunes has encountered a problem and it closes ? any answers have tried command prompt reset and it has not resolved it also un/reinstalled

I have installed iTunes on my new laptop OS Windows 7. I have two iphones, a 3rd gen nano and an ipod classic.
Since the install yesterday I keep getting an error message which itunes has stopped working A problem caused the program to stop working correctly. Windows will close the program and notify you if a soluion is available.
I have un and re installed and followed a command promt reset.
I still have the problem. Any ideas?

Ok. So I created a new account and iTunes did work. I went back into my original account and tried again and just to be more clear, after I open iTunes it asks me to accept or decline the agreement, I do that, then it says "updating library", and then one all the bars are full it closes and says "iTunes has encountered a problem and needs to close."
okay, let's start working through the user-account-specific causes of this message.
one possibility is damaged itunes preference files in the user account in which you're getting the crash. (there's a different set of those in each different user account, which is how we can get crashes limited to a single user account.)
if that is what is going on, we can often get past this by rebuilding the preference files in the account that is crashing. for the preference files rebuild technique, see my reply to kusma in this post:
b noir: Re: iTunes 7.0.1 crashing

Problems and solutions for 9i DB R2 install on Redhat Linux AS 2.1

Installing 9iDB R2 9.2.0.1.0 on Redhat Linux Advanced Server 2.1 (aka Redhat Enterprise Linux (AS))
and applying patchset 2 (9.2.0.3.0)
This is a certified platform but I hit many problems getting the install to work. Here are the problems I hit and how I solved them.
Note: This is not intended to be a install for dummies but just an account of all my problems and how I overcame them. I spent 10 hours on this certified install (mostly looking for solutions to the problems I was having)
I had a Intel Pentium 3 with 512 Meg RAM. (test machine)
1. Install Redhat Linux
2. Install Sun JDK 1.3.1 (this is not actually required for this install. I installed it as I was planning to install 9iAS after this)
3. Install binutils-2.11.90.0.8-13 (also not required. I installed it for 9iAS)
All other components were ok on my Redhat Linux install (i.e. kernel version, glibc)
4. Create oracle user with dba group
5. Create oracle home and oracle base directories. Ensure these are owned by oracle with rwx
6. Set kernel parameters and make sure that they are initialized every startup:
I managed to locate this script in the Redhat document called
"Deploying Oracle9iTM on Red Hat Enterprise Linux AS"
create a file called oracle.sh in /etc and give it execute permissions
oracle.sh
#!/bin/bash
# configures kernel and system parameters for Oracle9i R2
# File handles
echo 65536 > /proc/sys/fs/file-max
ulimit -n 65536
# Shared memory
# The default SHMMAX value is too low and likely to cause a failure during
# database creation. SHMMAX should be equal to half of your system's physical
# RAM.
# The default is for 512 MB of RAM. Replace the default value as appropriate
# for the amount of memory in your system, i.e.,
# 512 MB : 268435456
# 1 GB : 536870912
# 2 GB : 1073741824
# 4 GB : 2147483648
echo 268435456 > /proc/sys/kernel/shmmax
# It is generally safe to leave these next two values as they are
echo 4096 > /proc/sys/kernel/shmmni
echo 2097152 > /proc/sys/kernel/shmall
# Semaphores
echo 250 32000 100 128 > /proc/sys/kernel/sem
# Sockets
echo 1024 65000 > /proc/sys/net/ipv4/ip_local_port_range
# Processes
ulimit -u 16384
----EOF---------
then...
# chmod +x /etc/oracle.sh # make executable
# . /etc/oracle.sh # apply changes now
edit /etc/rc.local to ensure this is run on startup
append to /etc/rc.local
# configure system for Oracle9i R2
bash /etc/oracle.sh
--------EOF--------------------
7. create a generic oracle environment setup script for all users to run
create the file /etc/profile.d/oracleenv.sh
be sure to change the variables to your environment (ORACLE_BASE, ORACLE_HOME and ORACLE_SID)
oracleenv.sh
# Configures the user's environment for Oracle9i R2
ORACLE_BASE=/opt/oracle
ORACLE_HOME=$ORACLE_BASE/product/9.2.0.1.0
ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
ORACLE_SID=orcl
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
PATH=$ORACLE_HOME/bin:$PATH
export ORACLE_BASE ORACLE_HOME ORA_NLS33 ORACLE_SID LD_LIBRARY_PATH PATH
----EOF---------
chmod 755 /etc/profile.d/oraclenv.sh
This file will run when a user logs in.
8. Install oracle DB
This took me quite a few attempts.
The first Install I did I received the error jre was not found. This issue seemed to be relating to the fact I was not installing on a Pentium 4. Oracle was looking for the jre in oracle.swd.jre/bin/i686 (and .../lib/i686) when some of the files were placed in i386 and java was looking in i386. This created a real mess. I had encountered a similar problem on a previous install on a different platform. I found articles of people that tried to just link the directories with symbolic links but this never worked. I tried my own version but also failed.
The solution that worked for me was to de-install, remove all the oracle directories created by the install (this part I had always done) AND also delete the file /etc/oraInstl.loc. This makes the Installer truly believe this is the first time Oracle has been installed on this box. My jre problem disappeared after that. (I don't know why it just didn't work in the first place...)
The next error I received was an ORA-03113 when creating the database (in the dbca). (It was actually at this point that I found the document from redhat as mentioned in my set 6 above) I also noticed that when running the install of the database, the default was for Oracle's SGA to use 70% of the available memory on my machine (I have 512M so that's 360M). Oracle instructed me to set shmmax to around 240M. This may be why the database creation failed as I thought the shmmax parameter needed to be larger that SGA. Anyway, I reduce the SGA to 50% and it worked.
This error may also have been caused by the kernel parameters not being set properly after a reboot so if you implementing stop 6 above. You may never get this problem, hopefully.
8. Install the universal Installer 2.2.0.18.0 (a prerequisite for installing the patchset 2)
You will need this to install the patchset 2. You can get it from metalink by searching for the bug number in the patch area. Search for bug/patch number 2878462 in patches. (37Meg for linux intel)
(Did you know that when oracle refer to a bug number, you should treat this as a patch number? General the bugs are not available for public viewing but oracle create a patch of the same number as a placeholder. So don't search for the bug in the site search or by doc id, go straight to the "patches" area and enter the bug number as a patch number, you'll have more success. - I only found that out today after struggling with metalink for the last 4 years)
9. Install the patchset 2
I downloaded patchset 2 (which will bring my DB version to 9.2.0.3.0) (220Meg). There is a special symbolic link command you'll need so make sure you remember to do this.
i.e.
$ cd $ORACLE_BASE/oui/bin/link
$ ln -s libclntsh.so.9.0 libclntsh.so
10. Migrate your database
I could not get this to work. The docs says I need at least 150M shared_pool_size and 150M Java_pool_size before running the startup migrate. As I only have 512Meg RAM (and shmmax set to 230M) I did hold much hope that this would work. I started my DB without the migrate option just to see if it would actually open with 300M in my pools. It did, so I shut it down and restarted with the migrate option. After 5 minutes of heavy processing (I still have an empty database) my server appeared to hang. I decided to restart the machine and just re-create my DB with the new patchset already applied. I delete my $ORACLE_BASE/oradata/<sid> directory and remove the entry from /etc/oratab and re-created my DB. This worked fine :)
I hope this document helps you for your install. Please drop me line if it does help and I'll endevour to write more documents like this one.
Please drop me a quick line at [email protected] even just to say "thanks".
I will include a few keywords here to help the searches find this document. (mainly the keywords I searched on and failed to find a doc like this one)
ORA-03113 ORA-3113 03113 3113 jre was not found jre not found i686 i386 i586 9iDB R2 9.2.0.1.0 9.2.0.3.0 Redhat Advanced Server 2.1 AS Enterprise Linux (AS) RH install error installation errors oui dbca problem issue
Good luck,
Tim Daniell.

The trick that worked for me was on a 2nd attempt. I installed once, let it fail with "jre was not found", de-install through the installer, delete all directories and files under $ORACLE_BASE (including $ORACLE_HOME), and also delete /etc/oraInst.loc.
I don't know why it fixes itself with this. Oracle say this is an unresolved bug 2726268 that lies in the installer. This is still unresolved by Oracle (as at 02-June-03) therefore it is not a published bug/patch. If this doesn't work, I suggest you open an iTAR and see if Oracle has any more suggestions for you.
Cheers,
Tim.

Good day, I have installed Acrobat DC, and would like to combine 2 files. One is excel allready converted to PDF - No problem. The other one is from Pastel mailed as PDF.

Good day,
I have installed Acrobat DC, and would like to combine 2 files. One is excel allready converted to PDF - No problem. The other one is from Pastel mailed as PDF.
When trying to merge the files, this file ask for a Password. No password was issued from the setup or mail?

Good day abrieb93050306,
I can understand your concern, however can you please let me know that are you able to open both the PDF files ( the one you converted form excel to pdf & the other pdf that was mailed to you ) individually without using any password?
As it asks for the password, it means that the postal mailed PDF is password protected. You can ask for the password from the sender of the postal mail & then try to combine the files.
Please follow the steps in the provided KB doc.to combine the files : Combine files into single PDF | Adobe Acrobat DC tutorials
This will probably resolve your issue.
Let me know if you still experience any issue.
Regards,
Aadesh

All of a sudden my iTunes stopped working, and I get the following error messages: 1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem and 2. iTunes was not installed correct

All of a sudden my iTunes stopped working, and I get the following error messages:
1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem
and
2. iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126).
Now I've checked the forums and followed the advice of uninstalling all Apple applications, rebooting, and reinstalling iTunes.
This is not working. I've tried installing as Administrator but doesn't make any difference at all.
There must be a way to fix this? I'm not a tech geek but I want to avoid having to take my laptop back to factory settings to sort this out.
Thanks

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99192)

Problem installing Oracle forms and report in windows 7

I have a problem while installing Oracle forms and reports in windows 7 64 bit
The error is : [as] [ERROR] [] [oracle.as.provisioning] [tid: 20] [ecid: 0000IY5_e_EApIRMyYAhMG1BuDGr00000B,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
So I Google for it and found that this is version mismatch (May be I am wrong) and it tells that I have to install WLS - 10.3.2 with ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
But I am unable to get wls version 10.3.2.
For better understanding I am listing my installers :
(I) Windows 7 Ultimate 64 Bit
(II) (Oracle 11g) win64_11gR2_database (1 & 2)
(III) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
(IV)wls1033_generic.jar , wls1033p_generic.jar , wls1035_generic.jar
(V)accessbridge-2_0_2-fcs-bin-b06
(VI)ofm_rcu_win32_11.1.1.2.1_disk1_1of1,ofm_rcu_win_11.1.1.3.1_disk1_1of1
(VII) ofm_wc_generic_11.1.1.5.0_disk1_1of1
(VIII)jdk-6u38-nb-7_2_1-windows-i586-ml , jdk-6u38-windows-x64
(IX) oepe-wls-indigo-installer-11.1.1.8.0.201110211138-10.3.6-win32
(X)wls1033_oepe111150_win32.exe
(XI)wls1035_win32.exe
(XII)wls1035_oepe111172_win64
(XIII)oepe-indigo-installer-12.1.1.0.1.201203120349-12.1.1-win64
After the installation while configure the forms reports, I am stuck while creating domain.
steps I follow is :
(i) Install Windows 7 Ultimate 64 Bit
(ii) (Oracle 11g) win64_11gR2_database (1 & 2)
(iii) wls1033_generic.jar
(iv) accessbridge-2_0_2-fcs-bin-b06
(v)ofm_rcu_win32_11.1.1.2.1_disk1_1of1
(vi) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
Please any body help, for the installation of oracle forms and reports.
I have a formatted Windows 7 Ultimate
Where I have installed Adobe Acrobat Reader
IIS server from windows installer
Now I want to know the exact procedure so that i can run the forms and report in my machine.
This is my first installation of Oracle forms & Reports, so please do not pre assume about my understanding (Like "to install this he surely did this environment settings" )
Please specify all the steps
Furthermore if Another software I have to download then please tell me.
And I will be grateful if you specify the mistakes in my side.
Looking forward with anticipation.

Solved, Thank you

16 mo young Mac Pro will not turn on. Dead. Why. No problems ever! Installed Yosemite and did not boot up after. Did that kill it? To young to die. What

16 mo young Mac Pro will not turn on. Dead. Why. No problems ever! Installed Yosemite and did not boot up after. Did that kill it? To young to die. What happened?what do I do now??????? Help!

Note that you don't have a Mac Pro as stated. Your profile says you have a MacBook Pro. Please clarify as they are entirely different computers. If nothing below works for you, then make a Genius Appointment and take it in for service.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Problem with black screen and crashes after installing windows 7 and bootcamp

K, so I partitioned my internal HD using Bootcamp, installed a new copy of Windows 7 Home, put in my Mac OSX disk and installed the additional stuff. I can successfully log in to Windows and open the browsers I have installed: Comodo dragon and Mozilla FF. McAfee auto installed with FF and I have Comodo Antivirus installed.
However, within minutes of use, my screen goes black, the computer does not shut down and reboot, I have to press the power button and wait a few secs for it to shut down then reboot. This has happened from both browsers while in Windows on Facebook in a game; while trying to save an attachment from an email via webmail and also while checking the inbuilt Windows settings for the display.
The latter produced the following report (below) on reboot and when I hit the "look for a solution" button, the actual window vanished after a few secs.
2 additional bits of info which may or may not be related:
a) running windows troubleshooter I discovered I have prob with:
driver for Inter (r) 5 series /3400 series chipset Family USB Universal Host Contoller - 3B3B
- I Googled this and it seems a common prob. Tried the reinstall, didn't work, so disabled it as suggested on some of the forum posts.
b) The OSX side of my computer seems to run fine most of the time, tho I have had the odd back screen, then wait, press reboot to power on and off in past as related in this post last month: https://discussions.apple.com/thread/4844797 (maybe a kernal panic..???)
Would anyone know what is causing these probs or what I can do about them? My computer is no longer under warranty and the couple of times I had probs while it was, I was told the probs were to do with the power supply and given a new one, I'm not sure if they looked at the logic board. The OSX side has also had an ongoing prob to do with sudden shrinkage of the image content, which I mentioned to the geniuses at the Apple store b4, but as it wasn't acting up there they couldn't do anything about it... ( looks as tho sm1 changed the screen resolution and whatever is in the browser window shrinks, tho desktop, is never effected - if that makes sense!.)
All in all tho, does make me wonder if the prob is based in the graphics switching..???
Problem signature:
Problem Event Name:    BlueScreen
OS Version:    6.1.7601.2.1.0.768.3
Locale ID:    2057 Additional information about the problem:
BCCode:    333
BCP1:    0000000000000001
BCP2:    0000000000000002
BCP3:    0000000000000003
BCP4:    0000000000000004
OS Version:    6_1_7601
Service Pack:    1_0
Product:    768_1 Files that help describe the problem:
C:\Windows\Minidump\032413-20872-01.dmp
C:\Users\KittyH\AppData\Local\Temp\WER-166952-0.sysdata.xml Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

When booting up hold down the option key and pick the Mac startup disk. To make it automatic, once in your Mac side go to preferences, startup disk and pick the Mac disk. Next time you boot up it will boot up to Mac OS.

10.4.6 installed - no problems and no double boot either

Similar Messages

Maybe you are looking for