10.4.6 JPEG issue not fixed by the Combo Updater
Hi,
I have the Safari/WebKit issue of JPEGs not displaying (Safari, NetNewsWire) and running the Combo Updater just doesn't fix my issue.
Does anyone have any other tips? I have tried this 4 or 5 times.
this is the Combo I am trying:
12:10 backspace:~/Desktop% openssl dgst -sha1 MacOSXUpdCombo10.4.6PPC.dmg
SHA1(MacOSXUpdCombo10.4.6PPC.dmg)= c9fde5a23bcebd08149301b7ad300881a563c398
mini Mac OS X (10.4.6) 2gb/bluetooth/airport
Welcome to Apple Discussions
The Combo Updater fix has been the usual remedy.
Two suggestions:
Make sure "display images" is checked in your Safari Preferences>Appearance panel.
If it is checked, move your Safari preference file (.com.apple.safari.plist - search for it in Spotlight) to the trash. Restart Safari. If there is no change, move the preference file back to its original location (User Library>Preferences folder). If it does work, go to Safari Preferences and restore any custom settings.
Similar Messages
-
Why the video calls under the Skype are still not fixed in the last update?
I am deeply dissapointed with the last update to the operating system of my new (2013) MacBook Air. The video calls didn't work, but I have followed one of the remedy on the net and made it working. After the update the problem returned. This problem is known for couple of months and the Apple doesn't care. Why ??? Can you please inform me and everybody else when you fix it, untill then I would not update OS. Thank you.
Download and install this latest Combo Update.
http://support.apple.com/kb/DL1676
Best. -
ACR 7.1 RC Issue Not Fixed in ACR 7.1
The issue I identified in ACR 7.1RC is not fixed in the production release of ACR 7.1. Maybe I did not explain this in enough detail, it's very easy to miss.
1. Select a RAW file that was previously adjusted using PV2010. When you open the file with ACR 7.1 it will open with PV2010 since the xmp file was saved with that process version.
2. Click on the "!" next to the image and it changes to PV2012 with suggested slider settings. Adjust one of the sliders in the Basic Panel - this is very important becasue if you don't adjust a slider the issue does not show up.
3. With the Basic Panel still selected, click on the three dashes to the right of the Basic Panel to get the pop down menu and select "Image Settings". The image changes back to PV2010 with settings that are saved in the XMP file. Now click on the three dashed again to get the pop down menu and "Custom Settings" is checked, but the image is displaying PV2010, not PV2012 like it should if "Custom Settings" is checked. You just lost your PV2012 settings. ACR 7.0 does not have this issue.
4. If in #3 above you select another panel before you click "Image Setting" the first time you can switch between PV2010 and PV2012 by clicking "Image Settings" for PV2010 and "Custom Settings" for PV2012. After you do this first in a panel other than the Basic Panel for the first time you can then do it in the Basic Panel without the problem occuring.
I discovered this while converting images that were adjusted using PV2010 to PV2012 and like to compare the two Process Versions. I did not have any problems with ACR 7.0, but when I installed ACR 7.1RC the issue occured. I was hoping it would be resolved in the Production Release of ACR 7.1, but it's still there.
I am using Photoshop CS6 on a Windows 7 Professional 64 bit computer, don't know if this same issue exists in Lightroom.None of the issues reported on this forum have been fixed in Camera Raw 7.1, near as I can see.
The Camera Raw 7.1 software was built on May 15, but Adobe appears to ignore beta feedback unless it's a real show-stopper. I can only imagine the definition of "show-stopper" must include users' systems actually catching fire or something.
Camera Raw 7.1 puts columnar color artifacts like this into images, for example:
Compare the above to the same conversion done with Camera Raw 7.0:
Plus Adobe has removed several color-fringing reduction features without providing suitable substitutes.
I recommend eveyone avoid upgrading to this release.
-Noel -
Have any heat issues been fixed in the new MBPs
I'm interseted in buying a new MBP. Does anyone know if any of the heat issues been fixed in the latest MBPs? And are the GPU's still underclocked?
Nicolas, I've got a week 12 MBP and have never considered it to have a heat problem.
Just made another 15 minute run of System Load with both CPUs at 100%. The CPU temp momentarily hit 78 C, then the fans kicked in (quietly) and the temperature stabilized at 73 C.
The current CPU temperature is 51 C, which is normal for routine writing, Web browsing and downloading to my database. When I'm doing database work that frequently but for only brief bursts pegs the CPUs, the temps run in the high 50s to low 60s C. On battery power, the temps drop several degrees C.
The computer remains comfortable to use at all times. Note: I use it on an aluminum tilt stand, whether on my desk or in my lap.
Haven't done the "grease fix" and don't plan to. -
Email address with hyphens and periods are invalid - still not fixed after 2.01 update
When I use the native messaging app in OS2 I cannot send or reply to an email address that has a period and a hyphen in it.
the address i'm sending to is [email protected]
the address turns red whether in a reply or selecting the address from the address book. When trying to send an Invalid Address message appears that says "the address fields include one or more invalid addressses. please correct or remove address and try again."
8000 fixes in the new update and this isn't one of them? Why? When will this be fixed - very irritating.Please, Lost_at-Sea, this is not a typo, it happens when I hit reply! It's also not a bounce message (which is what I would receive if I typed the address wrongly), it's an error message from the email app.
Blackberry staff have confirmed this is a bug in the forums and there is an open issue for it since mid-April.
http://btsc.webapps.blackberry.com/btsc/viewdocument.do?noCount=true&externalId=KB30115&sliceId=2&cm...
I think it's a combination of two dots and a hyphen that does it; I haven't heard of anyone unable to email to [email protected], but I might be wrong. -
X11 not starting after upgrading to 10.5.4 using the combo update
Because of a bug in Package Maker included with XCode 3.1 I ended up breaking my complete OS. After re-installing Leopard and using the Combo Update to 10.5.4 I am not able to run X11. I was able to use it prior to re-installing, but then I got the upgraded incremental via the online update.
It reports this on the console (a lot)
/usr/X11/libexec/x11-exec: Unable to find application for org.x.X11
It seems that this has already been reported to Apple, who acknowledged it as a bug. Is there any new from Apple on if / when / how this issue can be resolved other then by installing a separate application ? Will installing the Xquartz package allow me to install the fix when it becomes available ?Search these forums for X11. There's been some recent traffic on X11.
-
My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver
Hi Tokha,
If you are having an issue with using AirPlay from your MacBook Air, I would suggest that you troubleshoot using the steps in this article -
iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!
Then you either have a network problem or a hardware problem or a corrupted hard drive. You might try:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
You can also try downloading from another computer on a different network connection. -
EBay (only) cookie issues after 10.5.5 combo update
On my MacBook Pro -- I am getting a message when trying to sign onto eBay that my ''browser is not accepting cookies...''
At first I thought it was a Firefox issue, so then I tried Safari and same message.
Both browsers are configured to accept cookies properly and were working seamlessly just a day ago.
SO -- I also deleted the cache and the cookies on both browsers -- no luck.
SO -- I went to my other Mac, A PowerPC G5 -- no luck -- same message on both Firefox and Safari.
SO -- I ran trusty AppleJack (the new one that finally works with Leopard) -- on both machines (MacBook Pro and Power Mac G5) -- no luck.
SO -- on the same network -- I went to the Windows XP machine (A Dell desktop) and I was able to sign on properly with no hitches.
Therefore, since I seem to have eliminated the network, Windows XP, an Intel and PowerPC Macintosh, and have eliminated a specific browser issue -- I must assume there was some new security feature that the combo update for 10.5.5 has implemented that is causing this because that is the only thing that has changed in the last day. It's only eBay that seems to manifest this strange issue. Not PayPal. No other ''secure'' site.
Anybody else having this issue? Any ideas?
I'm not a ''dumb'' Mac user. I'm the kind who goes into the Genius bar with a problem, talks to them, stumps them and then proceeds to solve the problem by myself right in front of them. Do I have to make a trip into the city just to do this again...?Thanks. That helps narrow things down further. Now I know it's just me and just my Macintosh machines.
I do have NetBarrier (Intego) installed on both machines, but neither is set up to filter cookies because NB does a lousy job of that. I have never had that feature turned on -- and it's still disabled properly. I do, however, have the NB firewall up and running -- but again -- everything worked perfectly up to ''the day after'' the 10.5.5 update. Perhaps there are more non-OS related updates coming for things like this. -
Why MLB.TV is not appearing after the last update?
why MLB.TV is not appearing after the last update?
Make sure the store is set to the US.. Also restart the ATV.
-
How do I get my old Notes back? The latest update removed the legal pad and the fonts...
How do I get my old Notes back from the latest update? I lost my legal pad and the short font list...
No.
-
Mountain Lion stopped working with our Canon MX310 Printer? Why is the software not available from the Software Update Server?
The printer and ICA scanner driver is available from Apple. There is probably some other reason why you cannot get the drivers.
You can also get the drivers from Canon.
But reading your post it sounds like you were printing to the MX310 and recently it has stopped printing. Is this the case? -
Hi, i need help, okay..my issue is that since the lastest update for the ipod touch, my music list is all over the place....my question is how can i get the itunes main music playlist to appear the same on my ipod touch?
Hi Lawrence,
Thanks for your prompt response, however I have first seen it now. I have placed an active SIM card in the iPhone turned it off and on. It now says SIM locked, please write access code. The problem is I don't remember the password. When I connect it to iTunes it tell me that I have to write the password before it can be used with iTunes...... Do you have any good ideas? I see you are from the NYC area.... used to work there back in the early 90´ Those were good days..... What a City -
Is anyone else having issues with airplay after the Lion update?
Is anyone else having issues with airplay after the Lion update? It sees the libaray but won't connect...
I'm having the same issue. So far all lion has done for me is make all my microsoft office documents un-readable until I upgrade (about $150) and lose my home share capabilities...can anyone assist with this?
Maybe you are looking for
-
Ask to Buy for all family members.
Hi, I'm the Organizer for my Family Sharing. How can I ensure that all my family members have to "Ask to Buy", regardless if they are a child or not.
-
BED & Higher education cess are not appearing in J1IIN in export sales
Dear Experts, we have scenario, - 1000 & 2000 Plants are excisable - Excise group is same for 1000 & 2000 plant - Serial Group is different for 1000 & 2000 plant. we enter materials from 1000 & 2000 plant for creating a export sales order ( IN one e
-
Title. Also, my computer has the same HDD (Windows), but since i changed processor and motherboard I lost my data, (iTunes configuration also, I guess) And I can't sync. Need help
-
Performance Tuning -To find the execution time for Select Statement
Hi, There is a program that takes 10 hrs to execute. I need tune its performance. The program is basically reading few tables like KNA1,ANLA,ANLU,ADRC etc and updates to Custom table. I did my analysis and found few performance techniques for ABAP co
-
i have iphone 4s but it doesnot get on and i went to apple store they said it is totally gone cannot be repaired and they proposed me to give new iphone for 200 euros but i am confused which iphone will i get.Will i get iphone 4s or latest version?