10.4.6 now G5 running hot

Since upgrading to 10.4.6 I'm now finding that after using my dual 2 gig G5 for a couple of hours the fan will arc up and just keep going. Not doing anything particularly processor intensive. Have even shut all applications down and waited with no change. Have also tried resetting the PMU, which also made no difference.
Anyone else with a similar problem? Any suggestions appreciated.

I agree that safety is always a good policy but in the case of emptying
cache files I wouldn't worry about it. Installing a brand new OS effectively
us emptying your cache and I've never lost data that way either.
I do have all my files backed up to DVD and it's updated on a regular basis as
well so that also explains my somewhat cavalier attitude.

Similar Messages

Downloaded new iOS for iPhone 5. Now the handset is running hot, keeps freezing on different screens, won't charge on official charger ( only charges on crap poundland one) and battery is loosing 1% every two minutes!

Downloaded new iOS for iPhone 5. Now the handset is running hot, keeps freezing on different screens, won't charge on official charger ( only charges on crap poundland one) and battery is loosing 1% every two minutes! I've closed all apps and reset the complete phone but no luck. Any one know what else I can try apart from a new phone?

I have done a factory reset at 45% battery. After the reset it's still hot and at 35% now

Since iphone 5 6.1.3 upgrade mine has been running hot and reduced the battery life. Before I was getting 2days out of it. Now it's half a day ... No new apps and I've been closing down fully all apps. I think something is definitely up with 6.1.3

Since iphone5 6.1.3 upgrade mine has been running hot and totally reduced the battery life. Before I was getting 2days out of it. Now it's half a day ... No new apps and I've been closing down fully all apps. I think something is definitely up with 6.1.3
Are there many others experiencing this?

The number of apps that run in the background are very few and far between. An app being in the recently used apps bar or dock means just that for the most part - the app was recently used only and is not running.
Have you powered your iPhone off and on and/or tried a reset which is similar to a computer restart since the update was installed?
Are you accessing an Exchange account with the Mail app on your iPhone?

Mid 2013 macbook air: battery drain / running hot

Hi there,
For the last couple weeks my MBA starts to run hot and drain battery fast if I've been using it for a few hours.
I use it a lot on most days and connect to powercord only once it drops down low, like below 20%.
Have just seen other posts who recommend doing that at 50% battery and will now do the same.
However my question is: have i ruined my battery in the meantime?
AND/OR is there something else i can do to get battery running like it used to, and stop the loud fan switching on all the time because it's all running too hot?
I've copied in an etrecheck in case that helps diagnose more....
thanks heaps for any help!
Hardware Information:
          MacBook Air (13-inch, Mid 2013)
          MacBook Air - model: MacBookAir6,2
          1 1.7 GHz Intel Core i7 CPU: 2 cores
          8 GB RAM
Video Information:
          Intel HD Graphics 5000 - VRAM: 1024 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 5 days 21:16:2
Disk Information:
          APPLE SSD SM0512F disk0 : (500.28 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    disk0s2 (disk0s2) <not mounted>: 499.42 GB
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          Apple Internal Memory Card Reader
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
          [System] net.cloudpath.HelperTool.plist 3rd-Party support link
Launch Agents:
          [System] com.divx.dms.agent.plist 3rd-Party support link
          [System] com.divx.update.agent.plist 3rd-Party support link
          [System] com.sierrawireless.SwitchTool.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
          iTunesHelper
          Calendar
          Dropbox
          Google Drive
          Mail
          Twitter
          Disk Doctor
          UCM Launch Agent
Internet Plug-ins:
          FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          DivX Web Player: Version: 3.1.0.13 - SDK 10.5 3rd-Party support link
          AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          OVSHelper: Version: 1.1 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          QuickTime Plugin: Version: 7.7.3
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
          Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
Safari Extensions:
          Searchme: Version: 1.2
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
Old Applications:
          /Library/Application Support/Microsoft/MERP2.0
                    Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                    Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
          Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
          /Library/Application Support/DivX
                    DivXUpdate:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    DivXMediaServer:          Version: 10.1 - SDK 10.5 3rd-Party support link
                    DivXTransferWizard:          Version: 10.1.0 (Build 10.1.0.102) - SDK 10.5 3rd-Party support link
                    DMSLaunch:          Version: 1.0 - SDK 10.5 3rd-Party support link
          SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
          /Applications/Microsoft Office 2011/Office
                    Open XML for Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Office Setup Assistant:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                    Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    SyncServicesAgent:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Graph:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    My Day:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          /Applications/Microsoft Office 2011
                    Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Outlook:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Word:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          Microsoft Language Register:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
          iSkysoft Helper Compact:          Version: 2.2.6.4 - SDK 10.5 3rd-Party support link
                    /Users/[redacted]/Library/Application Support/Helper/iSkysoft Helper Compact.app
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
          /Applications/iWork '09
          Mobile Broadband Manager:          Version: 3.15 - SDK 10.5 3rd-Party support link
          DivX Converter:          Version: 10.1.0 (Build 10.1.0.166) - SDK 10.5 3rd-Party support link
          DivX Player:          Version: 10.1.0 (Build 11.3.0.40) - SDK 10.5 3rd-Party support link
Time Machine:
          Auto backup: YES
          Volumes being backed up:
          Destinations:
                    Data [Network] (Last used)
                    Total size: 2
                    Total number of backups: 57
                    Oldest backup: 2013-07-26 15:57:23 +0000
                    Last backup: 2014-03-18 12:31:47 +0000
                    Size of backup disk: Excellent
                              Backup size 2 > (Disk size 0 B X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
             100%          Locum
               2%          WindowServer
               1%          EtreCheck
               1%          Google Drive
               0%          Microsoft Word
Top Processes by Memory:
          213 MB          Safari
          188 MB          Finder
          156 MB          com.apple.WebKit.WebContent
          131 MB          Mail
          115 MB          Microsoft Word
Virtual Memory Information:
          2.33 GB          Free RAM
          3.60 GB          Active RAM
          626 MB          Inactive RAM
          1005 MB          Wired RAM
          7.65 GB          Page-ins
          64 MB          Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/\/Users\/Shared\//b'$'\ns/\/Users\/[^/]+\//\/Users\/USER\//g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//g;s/\).*/)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{print "not "}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

High CPU usage - Rapid Battery Drain - Running HOT

Looking for help.. PLEASE!
Z10 - Model STL100-3 Software release 10.2.1.2179
Symptoms;
Occasionally, and for no apparent reason, I notice my Z10 getting hot in my pocket. I run the device monitor App and see a very high CPU usage, which consequently drains the batter very quickly.
I've tried all the solutions from every support group thread and blog. And I mean ALL!
Pulling the battery
Replaced the battery
Removed the SIM
Deleted G Mail
Removed all 3rd party Apps (2)
Stopped email sync
Stopped calendar sync
Turned off all radio
Turned Off Wi-Fi
Let it sit for hours, even days to let it finish doing whatever its trying to do
Etc Etc Etc.
Finally, I called BB support, they wanted $50 to talk to someone. I told them the issue, they said the device is bad and must be replaced. I said its software related!! They said.. no, its a hardware issue. Device is under warranty and they want me to just go get a new one. I don't want a new one, I want a fix! Stop the waste of BB $
Temporary solution
Eventually, I decided I would do a restore, back to the factory settings, and here's when I found something
I run BB Link, connect the device, do a back-up... and LOW AND BEHOLD.. this fixes the high CPU usage and the device runs great, very cool, low cpu and extremely long battery life.
Sadly! .. this problem reoccurs, after a few days, sometimes after a couple of weeks and just out of the blue.
I can force this fault to occur, simply by doing a restart of the device. Sure enough, it will run hot, use all the cpu and I will have to do a back-up to get it to settle down again. I've tried to wait for the so called 'indexing' to finish, but it never stops running with high cpu and doesn't help.
Can any one tell me whats happening and how to make this a permanent fix?
There are hundreds if not thousands of people having very similar issues, and many different methods to fix it. Its my belief that there is an underlying bigger problem that relates to all these differing fixes, but as yet.. I cant find it and none of these fixes work for me. For now... I will keep doing the occasional back-up and hope I get a response that can help.
Thanks to all that read this.

curve8530curve8330 wrote:
The heat may be normal. After a little water damage incident, which I repaired, I disassembled my Z10 the find a small heat sink will thermal compound. This helps dissipate heat efficiently. I found a large number of air bubbles and possibly a large air pocket by the way the paste stuck to both sides. I removed the old paste and replaced it with artic silver paste and the z10 has been much much cooler. It use to run about 105*f and now it is around 85*f.
See this thread I posted for before and after pictures using a thermal imager.
http://supportforums.blackberry.com/t5/BlackBerry-Z10/Z10-heating-up-fix/m-p/3031220#M71390
@Curve8530 .....as much a s your discovery is appreciated, I hardly believe that most people will actually dismantle their phone to remove the paste and replace with arctic silver. Besides, what you are doing is not a fix for the actual problem....
In most cases, this heat is associated with apps using the CPU resources beyond the normal limits.
As an easy fix, finding and removing the app(s) in question followed by a reboot, solves the issue. In some cases an OS reload is necessary.... but under no circumstances I would even remotely suggest to any member to dismantle their phone and do what you did...

Imac 27 runs hot as ****, won't sleep, and cpu runs wild in w7

I have been having audio issues with the imac 27. plugging headphones or speakers causes cpu to run crazy, the mic in the triband trrs jack does not work, and the imac runs hot, and will not go into power saver mode.
When I came in I found my nephew who was listening to some music on the imac, and I felt the back top of the imac and it was hot as ****. I almost burned my hand. I realized then that he had plugged his headphones in.
Unplugging the headphones or speakers can solve some of these problems.
But, this is not an acceptable fix.
Please contact Apple and urge them to fix these sound card issues.
If anyone does not have these problems in w7 with the imac 27 even after the latest bootcamp and imac updates, let us know right here. I think this affects every one of the late 2009 imacs and maybe some earlier ones too running windows 7.
Here's the post I recently ran on the headphone jack issue.
Not only does the cpu run crazy but the imac 27 gets very, very hot. Since I unplugged the headphones, it runs much, much cooler.
Certainly, some Mac engineers should take care of this problem, it seems it is universal on all the imac 27's and from what I gather, the smaller screened cousins too.
Also, we certainly want a stereo mix option for audio in or out, or what is called "what you hear" or wave out. Imac is supposed to be much geared to multimedia apps.
Finally, the mic jack part of the trrs set up MUST be fixed! A lot of manufacturers are going to headset combo jacks as they call them, mic in and stereo out on the same tribanded plug. But, the old single jack for mic in and single jack for stereo out are two tiny parts of the hardware and super inexpensive for the manufacturer. Why in the **** to go to the "advanced" triplug if the **** thing doesn't work.
Mac has a great reputation. I hope they remedy these problems right away.
Anyone whose imac 27 or 24 whose headset plug is working correctly. Let us know! I don't think anyone's is, but I think that few people understand that their cpu is running so much faster with the plug in, plus few even understand the combo jack and the triband, or trrs audio jack! Out of 4 audio technicians I talked to, not one of them knew what a trrs jack was or that you even have a mic in jack as part of the headset jack!
When I told one senior that it worked on the Mac side, he didn't believe for a while, thought my sound might be recorded from the onboard mic, but I proved it to him by tapping iaudibly on my iphone mic headset and and it showing up in garage band clearly and listening to big difference in audio.
As for a usb audio adapter, I am in a neon light environment and find that those adapters are more sensitive to electrical interference. Besides I want to use the headset jack as it was meant to be used!
Thats it.
Again, if anyone using an imac 27 and windows 7 64 or 32 doesnt have these problems, let us know! We are all anxious for a fix!
Best to all!

Yes, I have been dealing with this problem since early January. I just can't believe that apple would not have the necessary driver for the sound card in the Imac 27! That's like trying to run a race and not bothering to tie your shoes! How can they not have something as basic as the sound connections working???
I was encouraged to buy a top of the line imac 27 because Apple had told us that bootcamp would enable Windows users to use the machine just as if it were a native windows machine, then they don't give us the **** drivers to use the trrs mic jack. And you can't use the external speakers without the cpu going wild and heating up like a pot bellied stove.
This is really disheartening and now I am really thinking I made a big mistake. I wouldn't mind migrating to Mac gradually, but I have lot of scientific and other programs that require windows. At this rate there will be thousands of other mac buyers who will never make the same mistake again.
As you can see I am quite angry about this, and getting more angry with each day Apple ignores every imac purchaser who expected to use Windows on the machine! Is the software for a sound card driver that difficult?
Having a computer which doesn't have sound that works correctly, is like having a car without seat, you can still drive it but isn't very **** comfortable.

MBP running hot, full fans and sluggish with both Safari and Firefox

Hi guya,
Im having problems with my kate 2007 MBP.
Im sure lately it seems to be running slower and slower and more and more sluggish - I was hoping my Mac wouldn't be subject to "slowdown" like every PC ive ever owned has.
The biggest problem is that if i use either Safari or Firefox to browse the web, they quickly start using 80-100% of my processor causing everything else to run sluggish, the computer to get hot, processors to run up to 90 degrees and fans on full.
Perhaps i multitask more than some people - I can tend ot have a lot of tabs open in Firefox, but sometimes Safari or Firefox show this behaviour with just one tab open.
I do multitask by having about 8 programs open at once and I jump from job to job, but in its early life the MBP used to deal with this - now i feel that i type faster than writing appears on screen, i have to wait ages to work in programs like indesign, and forget trying to run a game like The Sims...
Does everyone else have the 100% processor problems with Safari (and yes im on version 4, and the latest version of firefox too) the only browser which doesn't give me these problems is Opera - I can have many tabs open and it uses very little CPU, I just dont like use Opera as much as Firefox which is my browser of choice.
But why would my OSX run differently to anyone elses? Is there a problem with my Macbook, is there a problem with OSX (does it need installing again?) Is it just time for me to buy a new Macbook Pro - or if I run firefox on that will i get the same problem? Ive got nearly 30gb of spare HD space and maxed it out with 4gb of Ram - so neither of those are causing a problem either...
Any input would be great...

Have you tried restarting the comp? Sometimes a simple refresh will cure the sluggishness.
Try running repair permissions from your HD and afterwards run +repair disk+ from your software install DVD.
Regarding your comp running hot, make sure it is properly ventilated while in use. The MBP is not a laptop. According to the user manual it states in part:
+"Do not operate your MacBook Pro on a pillow or other soft material, as the material can block the airflow vents. Never place anything over the keyboard when operating your MacBook Pro. Never push objects into the ventilation openings."+

My PowerBook G4 runs hot after installing iTunes 7.1

Only Safari and iTunes open. The iStat Pro shows the CPU bottom and top around 55 degree Celcius (but the temp haven't changed since then...crash between 7.1 and iStat? but I can feel my PB runs hot)
Anybody got the same problem?

Ditto here.
Mac OS 10.4.9. iTunes 7.1.1 (5)
Airport Extreme Base Station "chained" to 2 Aiport Express Remotes. All connections are fine. Have internet on remote Macs. Airport Admin utility displays all three airport units, but I'm now unable to broadcast to the remote Express hooked up to my stereo in adjacent room. Have done this many times in the past without problem, but not in past couple months, so can't say if it broke with 7.1 or 7.1.1, but I get this message from iTunes:
The remote speaker "Living Room Speakers" is not compatible with this version of iTunes.
Prior to restarting iTunes (and being sure all Aiport station firmware was up-to-date, I was getting the message that no speakers were connected (double-checked all speaker and stereo connections), but now just the "not compatible" message.
G5 2.7 Dual Processor Mac OS X (10.4.9) 2 GB RAM
G5 2.7 Dual Processor Mac OS X (10.4.3) 2 GB RAM

17" iMac G5 2GHz (ALS but no iSight) runs hot and LOUD fans

Hi all,
I love my iMac. I've had it for nearly 8 months now. From day 1, I've been surprised by how loud it is under any significant CPU load. Unfortunately for me, I have waited until I'm well out of my phone support window to do anything about it. I have not yet purchased AppleCare.
As I type this, my CPU temp is 70 degrees C and fan is running at 2600 RPM, running nothing beyond the browser in which I'm typing. Should I attempt to work in iMovie and render said work to DVD (the reason I bought the machine), CPU temp will climb to ~76 and fan speed jumps to 4600-4800 RPM. At this speed, the noise is unbearable...but it is annoying even when idle.
Can any of you with this model of 17" iMac comment on your experience? Do these numbers and this experience sound normal? I know I'm not alone in this complaint, but I can't tell how widespread the problem is or whether my machine is normal or defective. I've been told by my local service center (CompUSA) that every single 17" iMac of this revision runs hot and has loud fans, and that there is nothing I can do short of complaining to Apple in the hopes of getting a replacement of a later revision. I was told by a "genius" at a different Apple store that my machine sounded about like he'd expect.
I'm getting a system board replacement tomorrow, but have been told not to expect it to make a significant difference. I figure I must do it before Apple would consider further action.
Any advice at all will be greatly appreciated. Sorry for the long message...
Thanks,
ctcaldwell
iMac G5 17" Mac OS X (10.4.5)

Mine is still fairly new as I picked it up off ebay a couple weeks ago brand new. So I don't know when it was actually manufactured. The part of the noise that gets under my skin is that soft but constant background whining coming from the CPU fan. It doesn't really sound like anything rubbing or a bad bearing, just the sound that an electric motor makes. But, it just seems to resonate from the lower left hand side where the air intake is.
So quite accidentally one day I held my hand under the left hand side and it completely muffled the whine sound. You could still here the hum and the sound of air but the irritating element was gone. Playing around a little more, I opted to tape a business card under that lower left hand corner, bridging the gap from front to back to still allow an airspace for the fan's suction. It knocks out about 90% of the whine.
It's been running that way for two weeks with no ill effects. Yes, the fan speeds up and slows down when needed. Normal at rest RPM is 1500 and mid to upper 50's on the temp. The highest temp I've seen under max continuous load is 65 with the fan at 4000 rpm.
I did experiment with something longer than the business card but I did then see a decrease in cooling capability. The isight models have their suction ducted out the back and I bet that gets rid of that resonance.
So all in all it still makes less fan noise than my old B&W, it's just that the B&W wasn't up on the desk so close to our heads. But, If your fans are constantly on high, there is a procedure for resetting something in power management, I just can't find it right now. Hope this helps.

Running hot after mountain lion install

Hello,
I just installed Mountain Lion last night. I had no issues at all. Checked out some of the different new features and all seemed to work fine.
But this morning after I turned my MacBook Pro back on is where I noticed something odd. I was using messages and also Safari. It was working great. My baterry was at 99% when I first turned it on. After about an hour of use I noticed the battery down to 67% and that Safari was not running as quick. It's not that it was not responding just running slow. Real slow. So I turned it back off and let it sit for a half hour and started it back up. Seems to running ok now. I even have a few programs open as well as the last time.
I just wanted to post here to see if anyone else had this issue. I think it's isolated and maybe some things didn't boot enough after install. Thoughts on this from anyone is greatly appreciated. Again it is runing fine and the slowing issue does not seem to be there now.
Thank You

Yes, me too. My Activity Monitor shows Safari Web Content absolutely destroying the CPU, exceeding 100%. Slows the whole system up just browsing.
Just compared browsing a facebook album in Chrome and Safari 6. Safari crawls through it with the CPU jumping immediately to over 90% while Chrome's processes barely ever reach 20%.
Also read this which suggests Spotlight's indexing is a potential cause but on my MBP (late 2011) Spotlight isn't shown as active:
http://gigaom.com/apple/is-mountain-lion-too-hot-for-your-mac-to-handle/
and also the CPU only runs hot while on Safari. Processor-heavy XCode consistently runs fine.
Assume a Safari bug. Anyone else experiencing this?
UPDATE: Restarting Safari makes a massive difference both to the real memory and the %CPU figures.

My Mac Book Pro is running hot AGAIN

Hi All, recently i rang Apple Support as i have Apple Care and a very helpfull man led me through TWO different procedures to solve my problem of my Mac Book pro running very hot in the area underneath at the rear.
both procedures involved me switching it On and/or Re-Booting and pressing three and/or four different keys on the keyboard !.
Whatever it did certainly did work..
However it is now running hot again and i have been trying to find on the Apple Support site, what i need to do to do this process again !
I was hoping to avoid phoning the Apple Care number again when i dont really need to, but I CANNOT find the support articles i need.
Can anybody help please
Tim

That is what i cannot understand, SANJAMPET says do this reset stuff when shutting down, while the apple folk say do it while switching ON ????
Why two diferent methods ?
tim

Powerbook G4 runs hot after OS X upgrade

I have a powerbookG4 that had 10.3.7. I upgraded today to 10.3.9 and upgraded iTunes from 4 to 6. (looking at the iPod video requirements) Now I'm noticing that it seems to run much hotter. I was on the internet, using AirPort (as usual) but the fan seemed to be running much faster and the bottom of the computer was almost too hot to touch. Plus, I also noticed in this form, that the computer automatically filled in the OS X form with 10.3.7, tho' I have verified in the 'about this apple' page that it now has 10.3.9.
Any suggetions? I wouldn't think running hot would be good for it, and if I want to use it on battery power, would use more power for the higher speed fan. (I did notice tho' that when I turned off AirPort for a few minutes and turned it back on that it's slowed the fan down some, and seems to be cooler, even after turning AirPort back on. Interesting.)
PowerBook G4 1.33GHz Mac OS X (10.3.9)

Welcome to Apple Discussions!
It sounds like you do may not be using the right discs. If you want to install Leopard, you will need the retail DVD--black with the purple aurora. If you want to install the original OS (Panther?), you need the exact install discs for the PowerBook. If you don't have these, you can call Apple with the serial number and get a replacement set for a fee.
Any other gray machine specific discs will simply not work. These are optimized for the computer they were shipped with.
The ?/Mac face just reflects the fact that the drive you erased is empty and there is no OS on it.
The idea of erasing and reinstalling the system software is basically a good idea. It just sounds like you are trying to use the wrong discs and will need to try to acquire the right ones.
Good luck!

MacBook Pro with Yosemite 10.10.4 running hot and slow. HP file is hogging all the memory

My MacBook Pro (late 2011, core i-7) running OS X 10.10.4 is running hot and very slow with the fan screaming . Activity Monitor shows a process called com.hp.devicemodel.TransportProxy is hogging almost all the memory and very high CPU activity. How can I get it to stop. Force quit will not shut it down. I would delete the file, but don't know where it is. Can someone please offer some help? Thanks, Tom

Try to uninstall all HP software (should be in Macintosh HD/Applications/HP folder It should have an uninstaller within that folder. My computer settled down just as soon as I finished the uninstall. Went back into the system preferences and reinstalled my printer and everything seems OK now. Hope it works for you.

15" Macbook Pro late 2011 is running hot.

My 15.4" Macbook Pro late 2011 (box instalation) is running hot at 200F and the fan jumps to 6000rpm without any real reason.
I know it is not normal, what can I do? Clean install or service?

Thanks guys,
Hardware testing passed.
Did a SMC reset and it seems at least for now that the RPM jump happens more smoothly and not to 6000rpm.
I will try this weekend to stress it a little and see how it behaves. (I will also upgrade the memory to 8GB)
In the end I think I will do a clean install and see I there will be any more improvements.
I'll keep you posted.

After Mavericks Install, MBP runs hot all the time

Im sure this has been said all over the community but I have to add my two cents. My 2011 MBP was perfect on Mtn Lion. I started the update which failed on install, which I then had to wipe the HD and do a fresh install. My time machine backup wouldnt even restore, that was a fun night let me tell you. Anyways, ever since I installed Mavericks, not only do I have the service battery issue everyone else has but now even running firefox or watching a movie will make the laptop run super hot and the fans start going. Ive even had the MBP shut itself down twice b/c of the overheating. Example: I almost couldnt even get time machine to make a new first time backup b/c the laptop starting running hot during the backup and it shut itself down. The second attempt worked but it sure seemed like it was on the verge of shutting down again. I just tried resetting the SMC but I dont think it did anything if you want my honest opinion.
I hope apple is listening and realizes what mess mavericks is making of our older macbooks.

I did do the verify/repair disk, and there is nothing wrong with the disk. Havent had a chance yet to boot in safe mode. Will post an update shortly but in the meantime:
Here is the etre report:
Hardware Information:
          MacBook Pro (15-inch, Mid 2009)
          MacBook Pro - model: MacBookPro5,3
          1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Video Information:
          NVIDIA GeForce 9400M - VRAM: 256 MB
          NVIDIA GeForce 9600M GT - VRAM: 512 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0
          AirPlay: Version: 1.9
          AppleAVBAudio: Version: 2.0.0
          iSightAudio: Version: 7.7.3
System Software:
          OS X 10.9 (13A603) - Uptime: 0 days 0:3:36
Disk Information:
          SAMSUNG SSD 830 Series disk0 : (256.06 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 255.2 GB (169.85 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R UJ-868
USB Information:
          Apple Internal Memory Card Reader
          Apple Inc. Built-in iSight
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.adobe.SwitchBoard.plist
          [loaded] com.bombich.ccc.plist
          [loaded] com.google.keystone.daemon.plist
          [loaded] com.microsoft.office.licensing.helper.plist
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.extensis.FMCore.plist
          [loaded] com.google.keystone.agent.plist
User Launch Agents:
          [loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.adobe.ARM.[...].plist
User Login Items:
          iTunesHelper
          Dropbox
3rd Party Preference Panes:
          Flash Player
Internet Plug-ins:
          AdobePDFViewer.plugin
          Default Browser.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          googletalkbrowserplugin.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          npgtpo3dautoplugin.plugin
          o1dbrowserplugin.plugin
          QuickTime Plugin.plugin
          SharePointBrowserPlugin.plugin
User Internet Plug-ins:
Bad Fonts:
          None
Time Machine:
          Mobile backups: ON
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 255.2 GB Disk used: 85.35 GB
          Destinations:
                    Time Machine Backup [Local] (Last used)
                    Total size: 749.81 GB
                    Total number of backups: 1
                    Oldest backup: 2013-11-20 14:15:59 +0000
                    Last backup: 2013-11-20 14:15:59 +0000
                    Size of backup disk: Adequate
                              Backup size 749.81 GB > (Disk used 85.35 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               3%          firefox
               3%          WindowServer
               2%          EtreCheck
               0%          fontd
               0%          mtmd
               0%          Dropbox
               0%          mdworker
               0%          Finder
               0%          aosnotifyd
Top Processes by Memory:
          344 MB firefox
          70 MB    Dropbox
          49 MB    Finder
          49 MB    mds_stores
          41 MB    Dock
          37 MB    WindowServer
          33 MB    FMCore
          29 MB    ocspd
          29 MB    mds
          29 MB    com.apple.IconServicesAgent
Virtual Memory Statistics:
          1.91 GB Free RAM
          1.08 GB Active RAM
          268 MB Inactive RAM
          508 MB Wired RAM
          268 MB Page-ins
          0 B      Page-outs

10.4.6 now G5 running hot

Similar Messages

Maybe you are looking for